ARM: dts: keystone: remove bogus IO resource entry from PCI binding

The PCI DT bindings contain a bogus entry for IO space which is not
supported on Keystone. The current bogus entry has an invalid size
and throws following error during boot.

[0.420713] keystone-pcie 21021000.pcie: error -22: failed to map
           resource [io  0x0000-0x400000003fff]

So remove it from the dts. While at it also add a bus-range
value that eliminates following log at boot up.

[0.420659] No bus range found for /soc/pcie@21020000, using [bus 00-ff]

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>

diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index 96b349fb0430c4444c55197d40b443c59c58b5f6..5374c9ae4fe6578a8195ea686ae25b22ec8bc165 100644 (file)
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -96,12 +96,13 @@
                        #address-cells = <3>;
                        #size-cells = <2>;
                        reg =  <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>;
-                       ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
-                               0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
+                       ranges = <0x82000000 0 0x60000000 0x60000000
+                                 0 0x10000000>;
 
                        status = "disabled";
                        device_type = "pci";
                        num-lanes = <2>;
+                       bus-range = <0x00 0xff>;
 
                        #interrupt-cells = <1>;
                        interrupt-map-mask = <0 0 0 7>;

diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index e34b2265458a5836f0bf1d1f92997dbe39a9216f..f627a1c06648a4ec1c66008a16c66f4f975946da 100644 (file)
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -294,12 +294,13 @@
                        #address-cells = <3>;
                        #size-cells = <2>;
                        reg =  <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
-                       ranges = <0x81000000 0 0 0x23250000 0 0x4000
-                               0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
+                       ranges = <0x82000000 0 0x50000000 0x50000000
+                                 0 0x10000000>;
 
                        status = "disabled";
                        device_type = "pci";
                        num-lanes = <2>;
+                       bus-range = <0x00 0xff>;
 
                        #interrupt-cells = <1>;
                        interrupt-map-mask = <0 0 0 7>;