bnx2x: Fix link issue for BCM8727 boards.
authorYaniv Rosner <yanivr@broadcom.com>
Wed, 4 Apr 2012 01:28:59 +0000 (01:28 +0000)
committerDavid S. Miller <davem@davemloft.net>
Wed, 4 Apr 2012 22:24:23 +0000 (18:24 -0400)
This patch fixes a link problem on BCM57712 + BCM8727 designs in which the TX
laser is controller by GPIO, after 1.60.xx drivers were previously loaded.
On these designs the TX_LASER is enabled by logic AND between the PHY
(through MDIO), and the GPIO. When an old driver is used, it disables the
MDIO part, hence the GPIO control had no affect de facto.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

index 1438da85867877a1bc8750994187fd6e3e8d3ef6..732b4c80f116bf38d99b33e1e71b609b368b9dd2 100644 (file)
@@ -8089,7 +8089,9 @@ static int bnx2x_verify_sfp_module(struct bnx2x_phy *phy,
        netdev_err(bp->dev,  "Warning: Unqualified SFP+ module detected,"
                              " Port %d from %s part number %s\n",
                         params->port, vendor_name, vendor_pn);
-       phy->flags |= FLAGS_SFP_NOT_APPROVED;
+       if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) !=
+           PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_WARNING_MSG)
+               phy->flags |= FLAGS_SFP_NOT_APPROVED;
        return -EINVAL;
 }
 
@@ -9149,6 +9151,12 @@ static int bnx2x_8727_config_init(struct bnx2x_phy *phy,
                tmp2 &= 0xFFEF;
                bnx2x_cl45_write(bp, phy,
                        MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG, tmp2);
+               bnx2x_cl45_read(bp, phy,
+                               MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER,
+                               &tmp2);
+               bnx2x_cl45_write(bp, phy,
+                                MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER,
+                                (tmp2 & 0x7fff));
        }
 
        return 0;
@@ -9329,12 +9337,11 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL,
                                 ((1<<5) | (1<<2)));
        }
-       DP(NETIF_MSG_LINK, "Enabling 8727 TX laser if SFP is approved\n");
-       bnx2x_8727_specific_func(phy, params, ENABLE_TX);
-       /* If transmitter is disabled, ignore false link up indication */
-       bnx2x_cl45_read(bp, phy,
-                       MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, &val1);
-       if (val1 & (1<<15)) {
+
+       if (!(phy->flags & FLAGS_SFP_NOT_APPROVED)) {
+               DP(NETIF_MSG_LINK, "Enabling 8727 TX laser\n");
+               bnx2x_sfp_set_transmitter(params, phy, 1);
+       } else {
                DP(NETIF_MSG_LINK, "Tx is disabled\n");
                return 0;
        }