ARM: dts: dra72-evm: Add pinmux configuration for MMC

Include dra72x-mmc-iodelay.dtsi which has pinmux and IODelay
configuration values for the various MMC modes for dra72 SoC
and use it in the pinctrl properties of MMC devicetree
nodes present in dra72-evm.dts.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 99fdb3d8445bb2fa0f3bda00ccaececfe328edab..c572693b16657b69565b3581ac39c9bd8298cba2 100644 (file)
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -6,6 +6,7 @@
  * published by the Free Software Foundation.
  */
 #include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
 / {
        model = "TI DRA722";
 
@@ -55,9 +56,22 @@
 };
 
 &mmc1 {
+       pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+       pinctrl-0 = <&mmc1_pins_default>;
+       pinctrl-1 = <&mmc1_pins_hs>;
+       pinctrl-2 = <&mmc1_pins_sdr12>;
+       pinctrl-3 = <&mmc1_pins_sdr25>;
+       pinctrl-4 = <&mmc1_pins_sdr50>;
+       pinctrl-5 = <&mmc1_pins_ddr50_rev10>;
+       pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev10_conf>;
        vqmmc-supply = <&ldo1_reg>;
 };
 
 &mmc2 {
+       pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+       pinctrl-0 = <&mmc2_pins_default>;
+       pinctrl-1 = <&mmc2_pins_hs>;
+       pinctrl-2 = <&mmc2_pins_ddr_rev10>;
+       pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev10_conf>;
        vmmc-supply = <&evm_1v8_sw>;
 };