--- /dev/null
+include include/asm-generic/Kbuild.asm
--- /dev/null
+
+/* include/asm-m68knommu/MC68328.h: '328 control registers
+ *
+ * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
+ * Bear & Hare Software, Inc.
+ *
+ * Based on include/asm-m68knommu/MC68332.h
+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
+ *
+ */
+
+#ifndef _MC68328_H_
+#define _MC68328_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
+#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
+
+/**********
+ *
+ * 0xFFFFF0xx -- System Control
+ *
+ **********/
+
+/*
+ * System Control Register (SCR)
+ */
+#define SCR_ADDR 0xfffff000
+#define SCR BYTE_REF(SCR_ADDR)
+
+#define SCR_WDTH8 0x01 /* 8-Bit Width Select */
+#define SCR_DMAP 0x04 /* Double Map */
+#define SCR_SO 0x08 /* Supervisor Only */
+#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */
+#define SCR_PRV 0x20 /* Privilege Violation */
+#define SCR_WPV 0x40 /* Write Protect Violation */
+#define SCR_BETO 0x80 /* Bus-Error TimeOut */
+
+/*
+ * Mask Revision Register
+ */
+#define MRR_ADDR 0xfffff004
+#define MRR LONG_REF(MRR_ADDR)
+
+/**********
+ *
+ * 0xFFFFF1xx -- Chip-Select logic
+ *
+ **********/
+
+/**********
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * Group Base Address Registers
+ */
+#define GRPBASEA_ADDR 0xfffff100
+#define GRPBASEB_ADDR 0xfffff102
+#define GRPBASEC_ADDR 0xfffff104
+#define GRPBASED_ADDR 0xfffff106
+
+#define GRPBASEA WORD_REF(GRPBASEA_ADDR)
+#define GRPBASEB WORD_REF(GRPBASEB_ADDR)
+#define GRPBASEC WORD_REF(GRPBASEC_ADDR)
+#define GRPBASED WORD_REF(GRPBASED_ADDR)
+
+#define GRPBASE_V 0x0001 /* Valid */
+#define GRPBASE_GBA_MASK 0xfff0 /* Group Base Address (bits 31-20) */
+
+/*
+ * Group Base Address Mask Registers
+ */
+#define GRPMASKA_ADDR 0xfffff108
+#define GRPMASKB_ADDR 0xfffff10a
+#define GRPMASKC_ADDR 0xfffff10c
+#define GRPMASKD_ADDR 0xfffff10e
+
+#define GRPMASKA WORD_REF(GRPMASKA_ADDR)
+#define GRPMASKB WORD_REF(GRPMASKB_ADDR)
+#define GRPMASKC WORD_REF(GRPMASKC_ADDR)
+#define GRPMASKD WORD_REF(GRPMASKD_ADDR)
+
+#define GRMMASK_GMA_MASK 0xfffff0 /* Group Base Mask (bits 31-20) */
+
+/*
+ * Chip-Select Option Registers (group A)
+ */
+#define CSA0_ADDR 0xfffff110
+#define CSA1_ADDR 0xfffff114
+#define CSA2_ADDR 0xfffff118
+#define CSA3_ADDR 0xfffff11c
+
+#define CSA0 LONG_REF(CSA0_ADDR)
+#define CSA1 LONG_REF(CSA1_ADDR)
+#define CSA2 LONG_REF(CSA2_ADDR)
+#define CSA3 LONG_REF(CSA3_ADDR)
+
+#define CSA_WAIT_MASK 0x00000007 /* Wait State Selection */
+#define CSA_WAIT_SHIFT 0
+#define CSA_RO 0x00000008 /* Read-Only */
+#define CSA_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */
+#define CSA_AM_SHIFT 8
+#define CSA_BUSW 0x00010000 /* Bus Width Select */
+#define CSA_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */
+#define CSA_AC_SHIFT 24
+
+/*
+ * Chip-Select Option Registers (group B)
+ */
+#define CSB0_ADDR 0xfffff120
+#define CSB1_ADDR 0xfffff124
+#define CSB2_ADDR 0xfffff128
+#define CSB3_ADDR 0xfffff12c
+
+#define CSB0 LONG_REF(CSB0_ADDR)
+#define CSB1 LONG_REF(CSB1_ADDR)
+#define CSB2 LONG_REF(CSB2_ADDR)
+#define CSB3 LONG_REF(CSB3_ADDR)
+
+#define CSB_WAIT_MASK 0x00000007 /* Wait State Selection */
+#define CSB_WAIT_SHIFT 0
+#define CSB_RO 0x00000008 /* Read-Only */
+#define CSB_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */
+#define CSB_AM_SHIFT 8
+#define CSB_BUSW 0x00010000 /* Bus Width Select */
+#define CSB_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */
+#define CSB_AC_SHIFT 24
+
+/*
+ * Chip-Select Option Registers (group C)
+ */
+#define CSC0_ADDR 0xfffff130
+#define CSC1_ADDR 0xfffff134
+#define CSC2_ADDR 0xfffff138
+#define CSC3_ADDR 0xfffff13c
+
+#define CSC0 LONG_REF(CSC0_ADDR)
+#define CSC1 LONG_REF(CSC1_ADDR)
+#define CSC2 LONG_REF(CSC2_ADDR)
+#define CSC3 LONG_REF(CSC3_ADDR)
+
+#define CSC_WAIT_MASK 0x00000007 /* Wait State Selection */
+#define CSC_WAIT_SHIFT 0
+#define CSC_RO 0x00000008 /* Read-Only */
+#define CSC_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */
+#define CSC_AM_SHIFT 4
+#define CSC_BUSW 0x00010000 /* Bus Width Select */
+#define CSC_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */
+#define CSC_AC_SHIFT 20
+
+/*
+ * Chip-Select Option Registers (group D)
+ */
+#define CSD0_ADDR 0xfffff140
+#define CSD1_ADDR 0xfffff144
+#define CSD2_ADDR 0xfffff148
+#define CSD3_ADDR 0xfffff14c
+
+#define CSD0 LONG_REF(CSD0_ADDR)
+#define CSD1 LONG_REF(CSD1_ADDR)
+#define CSD2 LONG_REF(CSD2_ADDR)
+#define CSD3 LONG_REF(CSD3_ADDR)
+
+#define CSD_WAIT_MASK 0x00000007 /* Wait State Selection */
+#define CSD_WAIT_SHIFT 0
+#define CSD_RO 0x00000008 /* Read-Only */
+#define CSD_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */
+#define CSD_AM_SHIFT 4
+#define CSD_BUSW 0x00010000 /* Bus Width Select */
+#define CSD_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */
+#define CSD_AC_SHIFT 20
+
+/**********
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * PLL Control Register
+ */
+#define PLLCR_ADDR 0xfffff200
+#define PLLCR WORD_REF(PLLCR_ADDR)
+
+#define PLLCR_DISPLL 0x0008 /* Disable PLL */
+#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */
+#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */
+#define PLLCR_SYSCLK_SEL_SHIFT 8
+#define PLLCR_PIXCLK_SEL_MASK 0x3800 /* LCD Clock Selection */
+#define PLLCR_PIXCLK_SEL_SHIFT 11
+
+/* 'EZ328-compatible definitions */
+#define PLLCR_LCDCLK_SEL_MASK PLLCR_PIXCLK_SEL_MASK
+#define PLLCR_LCDCLK_SEL_SHIFT PLLCR_PIXCLK_SEL_SHIFT
+
+/*
+ * PLL Frequency Select Register
+ */
+#define PLLFSR_ADDR 0xfffff202
+#define PLLFSR WORD_REF(PLLFSR_ADDR)
+
+#define PLLFSR_PC_MASK 0x00ff /* P Count */
+#define PLLFSR_PC_SHIFT 0
+#define PLLFSR_QC_MASK 0x0f00 /* Q Count */
+#define PLLFSR_QC_SHIFT 8
+#define PLLFSR_PROT 0x4000 /* Protect P & Q */
+#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */
+
+/*
+ * Power Control Register
+ */
+#define PCTRL_ADDR 0xfffff207
+#define PCTRL BYTE_REF(PCTRL_ADDR)
+
+#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */
+#define PCTRL_WIDTH_SHIFT 0
+#define PCTRL_STOP 0x40 /* Enter power-save mode immediately */
+#define PCTRL_PCEN 0x80 /* Power Control Enable */
+
+/**********
+ *
+ * 0xFFFFF3xx -- Interrupt Controller
+ *
+ **********/
+
+/*
+ * Interrupt Vector Register
+ */
+#define IVR_ADDR 0xfffff300
+#define IVR BYTE_REF(IVR_ADDR)
+
+#define IVR_VECTOR_MASK 0xF8
+
+/*
+ * Interrupt control Register
+ */
+#define ICR_ADRR 0xfffff302
+#define ICR WORD_REF(ICR_ADDR)
+
+#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */
+#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */
+#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */
+#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */
+#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */
+#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */
+#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */
+#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMR_ADDR 0xfffff304
+#define IMR LONG_REF(IMR_ADDR)
+
+/*
+ * Define the names for bit positions first. This is useful for
+ * request_irq
+ */
+#define SPIM_IRQ_NUM 0 /* SPI Master interrupt */
+#define TMR2_IRQ_NUM 1 /* Timer 2 interrupt */
+#define UART_IRQ_NUM 2 /* UART interrupt */
+#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */
+#define RTC_IRQ_NUM 4 /* RTC interrupt */
+#define KB_IRQ_NUM 6 /* Keyboard Interrupt */
+#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */
+#define INT0_IRQ_NUM 8 /* External INT0 */
+#define INT1_IRQ_NUM 9 /* External INT1 */
+#define INT2_IRQ_NUM 10 /* External INT2 */
+#define INT3_IRQ_NUM 11 /* External INT3 */
+#define INT4_IRQ_NUM 12 /* External INT4 */
+#define INT5_IRQ_NUM 13 /* External INT5 */
+#define INT6_IRQ_NUM 14 /* External INT6 */
+#define INT7_IRQ_NUM 15 /* External INT7 */
+#define IRQ1_IRQ_NUM 16 /* IRQ1 */
+#define IRQ2_IRQ_NUM 17 /* IRQ2 */
+#define IRQ3_IRQ_NUM 18 /* IRQ3 */
+#define IRQ6_IRQ_NUM 19 /* IRQ6 */
+#define PEN_IRQ_NUM 20 /* Pen Interrupt */
+#define SPIS_IRQ_NUM 21 /* SPI Slave Interrupt */
+#define TMR1_IRQ_NUM 22 /* Timer 1 interrupt */
+#define IRQ7_IRQ_NUM 23 /* IRQ7 */
+
+/* '328-compatible definitions */
+#define SPI_IRQ_NUM SPIM_IRQ_NUM
+#define TMR_IRQ_NUM TMR1_IRQ_NUM
+
+/*
+ * Here go the bitmasks themselves
+ */
+#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */
+#define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */
+#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
+#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
+#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */
+#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */
+#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */
+#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */
+#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */
+#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */
+#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */
+#define IMR_MINT4 (1 << INT4_IRQ_NUM) /* Mask External INT4 */
+#define IMR_MINT5 (1 << INT5_IRQ_NUM) /* Mask External INT5 */
+#define IMR_MINT6 (1 << INT6_IRQ_NUM) /* Mask External INT6 */
+#define IMR_MINT7 (1 << INT7_IRQ_NUM) /* Mask External INT7 */
+#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */
+#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */
+#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */
+#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */
+#define IMR_MPEN (1 << PEN_IRQ_NUM) /* Mask Pen Interrupt */
+#define IMR_MSPIS (1 << SPIS_IRQ_NUM) /* Mask SPI Slave Interrupt */
+#define IMR_MTMR1 (1 << TMR1_IRQ_NUM) /* Mask Timer 1 interrupt */
+#define IMR_MIRQ7 (1 << IRQ7_IRQ_NUM) /* Mask IRQ7 */
+
+/* 'EZ328-compatible definitions */
+#define IMR_MSPI IMR_MSPIM
+#define IMR_MTMR IMR_MTMR1
+
+/*
+ * Interrupt Wake-Up Enable Register
+ */
+#define IWR_ADDR 0xfffff308
+#define IWR LONG_REF(IWR_ADDR)
+
+#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
+#define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
+#define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
+#define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
+#define IWR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
+#define IWR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
+#define IWR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */
+#define IWR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
+#define IWR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
+#define IWR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
+#define IWR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
+#define IWR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */
+#define IWR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */
+#define IWR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */
+#define IWR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */
+#define IWR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
+#define IWR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
+#define IWR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
+#define IWR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
+#define IWR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */
+#define IWR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */
+#define IWR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */
+#define IWR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */
+
+/*
+ * Interrupt Status Register
+ */
+#define ISR_ADDR 0xfffff30c
+#define ISR LONG_REF(ISR_ADDR)
+
+#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
+#define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
+#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
+#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
+#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
+#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
+#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */
+#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
+#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
+#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
+#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
+#define ISR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */
+#define ISR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */
+#define ISR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */
+#define ISR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */
+#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
+#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
+#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
+#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
+#define ISR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */
+#define ISR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */
+#define ISR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */
+#define ISR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */
+
+/* 'EZ328-compatible definitions */
+#define ISR_SPI ISR_SPIM
+#define ISR_TMR ISR_TMR1
+
+/*
+ * Interrupt Pending Register
+ */
+#define IPR_ADDR 0xfffff310
+#define IPR LONG_REF(IPR_ADDR)
+
+#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
+#define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
+#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
+#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
+#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
+#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
+#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */
+#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
+#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
+#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
+#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
+#define IPR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */
+#define IPR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */
+#define IPR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */
+#define IPR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */
+#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
+#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
+#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
+#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
+#define IPR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */
+#define IPR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */
+#define IPR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */
+#define IPR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */
+
+/* 'EZ328-compatible definitions */
+#define IPR_SPI IPR_SPIM
+#define IPR_TMR IPR_TMR1
+
+/**********
+ *
+ * 0xFFFFF4xx -- Parallel Ports
+ *
+ **********/
+
+/*
+ * Port A
+ */
+#define PADIR_ADDR 0xfffff400 /* Port A direction reg */
+#define PADATA_ADDR 0xfffff401 /* Port A data register */
+#define PASEL_ADDR 0xfffff403 /* Port A Select register */
+
+#define PADIR BYTE_REF(PADIR_ADDR)
+#define PADATA BYTE_REF(PADATA_ADDR)
+#define PASEL BYTE_REF(PASEL_ADDR)
+
+#define PA(x) (1 << (x))
+#define PA_A(x) PA((x) - 16) /* This is specific to PA only! */
+
+#define PA_A16 PA(0) /* Use A16 as PA(0) */
+#define PA_A17 PA(1) /* Use A17 as PA(1) */
+#define PA_A18 PA(2) /* Use A18 as PA(2) */
+#define PA_A19 PA(3) /* Use A19 as PA(3) */
+#define PA_A20 PA(4) /* Use A20 as PA(4) */
+#define PA_A21 PA(5) /* Use A21 as PA(5) */
+#define PA_A22 PA(6) /* Use A22 as PA(6) */
+#define PA_A23 PA(7) /* Use A23 as PA(7) */
+
+/*
+ * Port B
+ */
+#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */
+#define PBDATA_ADDR 0xfffff409 /* Port B data register */
+#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */
+
+#define PBDIR BYTE_REF(PBDIR_ADDR)
+#define PBDATA BYTE_REF(PBDATA_ADDR)
+#define PBSEL BYTE_REF(PBSEL_ADDR)
+
+#define PB(x) (1 << (x))
+#define PB_D(x) PB(x) /* This is specific to port B only */
+
+#define PB_D0 PB(0) /* Use D0 as PB(0) */
+#define PB_D1 PB(1) /* Use D1 as PB(1) */
+#define PB_D2 PB(2) /* Use D2 as PB(2) */
+#define PB_D3 PB(3) /* Use D3 as PB(3) */
+#define PB_D4 PB(4) /* Use D4 as PB(4) */
+#define PB_D5 PB(5) /* Use D5 as PB(5) */
+#define PB_D6 PB(6) /* Use D6 as PB(6) */
+#define PB_D7 PB(7) /* Use D7 as PB(7) */
+
+/*
+ * Port C
+ */
+#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */
+#define PCDATA_ADDR 0xfffff411 /* Port C data register */
+#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */
+
+#define PCDIR BYTE_REF(PCDIR_ADDR)
+#define PCDATA BYTE_REF(PCDATA_ADDR)
+#define PCSEL BYTE_REF(PCSEL_ADDR)
+
+#define PC(x) (1 << (x))
+
+#define PC_WE PC(6) /* Use WE as PC(6) */
+#define PC_DTACK PC(5) /* Use DTACK as PC(5) */
+#define PC_IRQ7 PC(4) /* Use IRQ7 as PC(4) */
+#define PC_LDS PC(2) /* Use LDS as PC(2) */
+#define PC_UDS PC(1) /* Use UDS as PC(1) */
+#define PC_MOCLK PC(0) /* Use MOCLK as PC(0) */
+
+/*
+ * Port D
+ */
+#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */
+#define PDDATA_ADDR 0xfffff419 /* Port D data register */
+#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */
+#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */
+#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */
+#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */
+
+#define PDDIR BYTE_REF(PDDIR_ADDR)
+#define PDDATA BYTE_REF(PDDATA_ADDR)
+#define PDPUEN BYTE_REF(PDPUEN_ADDR)
+#define PDPOL BYTE_REF(PDPOL_ADDR)
+#define PDIRQEN BYTE_REF(PDIRQEN_ADDR)
+#define PDIQEG BYTE_REF(PDIQEG_ADDR)
+
+#define PD(x) (1 << (x))
+#define PD_KB(x) PD(x) /* This is specific for Port D only */
+
+#define PD_KB0 PD(0) /* Use KB0 as PD(0) */
+#define PD_KB1 PD(1) /* Use KB1 as PD(1) */
+#define PD_KB2 PD(2) /* Use KB2 as PD(2) */
+#define PD_KB3 PD(3) /* Use KB3 as PD(3) */
+#define PD_KB4 PD(4) /* Use KB4 as PD(4) */
+#define PD_KB5 PD(5) /* Use KB5 as PD(5) */
+#define PD_KB6 PD(6) /* Use KB6 as PD(6) */
+#define PD_KB7 PD(7) /* Use KB7 as PD(7) */
+
+/*
+ * Port E
+ */
+#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */
+#define PEDATA_ADDR 0xfffff421 /* Port E data register */
+#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */
+#define PESEL_ADDR 0xfffff423 /* Port E Select Register */
+
+#define PEDIR BYTE_REF(PEDIR_ADDR)
+#define PEDATA BYTE_REF(PEDATA_ADDR)
+#define PEPUEN BYTE_REF(PEPUEN_ADDR)
+#define PESEL BYTE_REF(PESEL_ADDR)
+
+#define PE(x) (1 << (x))
+
+#define PE_CSA1 PE(1) /* Use CSA1 as PE(1) */
+#define PE_CSA2 PE(2) /* Use CSA2 as PE(2) */
+#define PE_CSA3 PE(3) /* Use CSA3 as PE(3) */
+#define PE_CSB0 PE(4) /* Use CSB0 as PE(4) */
+#define PE_CSB1 PE(5) /* Use CSB1 as PE(5) */
+#define PE_CSB2 PE(6) /* Use CSB2 as PE(6) */
+#define PE_CSB3 PE(7) /* Use CSB3 as PE(7) */
+
+/*
+ * Port F
+ */
+#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */
+#define PFDATA_ADDR 0xfffff429 /* Port F data register */
+#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */
+#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */
+
+#define PFDIR BYTE_REF(PFDIR_ADDR)
+#define PFDATA BYTE_REF(PFDATA_ADDR)
+#define PFPUEN BYTE_REF(PFPUEN_ADDR)
+#define PFSEL BYTE_REF(PFSEL_ADDR)
+
+#define PF(x) (1 << (x))
+#define PF_A(x) PF((x) - 24) /* This is Port F specific only */
+
+#define PF_A24 PF(0) /* Use A24 as PF(0) */
+#define PF_A25 PF(1) /* Use A25 as PF(1) */
+#define PF_A26 PF(2) /* Use A26 as PF(2) */
+#define PF_A27 PF(3) /* Use A27 as PF(3) */
+#define PF_A28 PF(4) /* Use A28 as PF(4) */
+#define PF_A29 PF(5) /* Use A29 as PF(5) */
+#define PF_A30 PF(6) /* Use A30 as PF(6) */
+#define PF_A31 PF(7) /* Use A31 as PF(7) */
+
+/*
+ * Port G
+ */
+#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */
+#define PGDATA_ADDR 0xfffff431 /* Port G data register */
+#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */
+#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */
+
+#define PGDIR BYTE_REF(PGDIR_ADDR)
+#define PGDATA BYTE_REF(PGDATA_ADDR)
+#define PGPUEN BYTE_REF(PGPUEN_ADDR)
+#define PGSEL BYTE_REF(PGSEL_ADDR)
+
+#define PG(x) (1 << (x))
+
+#define PG_UART_TXD PG(0) /* Use UART_TXD as PG(0) */
+#define PG_UART_RXD PG(1) /* Use UART_RXD as PG(1) */
+#define PG_PWMOUT PG(2) /* Use PWMOUT as PG(2) */
+#define PG_TOUT2 PG(3) /* Use TOUT2 as PG(3) */
+#define PG_TIN2 PG(4) /* Use TIN2 as PG(4) */
+#define PG_TOUT1 PG(5) /* Use TOUT1 as PG(5) */
+#define PG_TIN1 PG(6) /* Use TIN1 as PG(6) */
+#define PG_RTCOUT PG(7) /* Use RTCOUT as PG(7) */
+
+/*
+ * Port J
+ */
+#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */
+#define PJDATA_ADDR 0xfffff439 /* Port J data register */
+#define PJSEL_ADDR 0xfffff43b /* Port J Select Register */
+
+#define PJDIR BYTE_REF(PJDIR_ADDR)
+#define PJDATA BYTE_REF(PJDATA_ADDR)
+#define PJSEL BYTE_REF(PJSEL_ADDR)
+
+#define PJ(x) (1 << (x))
+
+#define PJ_CSD3 PJ(7) /* Use CSD3 as PJ(7) */
+
+/*
+ * Port K
+ */
+#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */
+#define PKDATA_ADDR 0xfffff441 /* Port K data register */
+#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enable reg */
+#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */
+
+#define PKDIR BYTE_REF(PKDIR_ADDR)
+#define PKDATA BYTE_REF(PKDATA_ADDR)
+#define PKPUEN BYTE_REF(PKPUEN_ADDR)
+#define PKSEL BYTE_REF(PKSEL_ADDR)
+
+#define PK(x) (1 << (x))
+
+/*
+ * Port M
+ */
+#define PMDIR_ADDR 0xfffff438 /* Port M direction reg */
+#define PMDATA_ADDR 0xfffff439 /* Port M data register */
+#define PMPUEN_ADDR 0xfffff43a /* Port M Pull-Up enable reg */
+#define PMSEL_ADDR 0xfffff43b /* Port M Select Register */
+
+#define PMDIR BYTE_REF(PMDIR_ADDR)
+#define PMDATA BYTE_REF(PMDATA_ADDR)
+#define PMPUEN BYTE_REF(PMPUEN_ADDR)
+#define PMSEL BYTE_REF(PMSEL_ADDR)
+
+#define PM(x) (1 << (x))
+
+/**********
+ *
+ * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
+ *
+ **********/
+
+/*
+ * PWM Control Register
+ */
+#define PWMC_ADDR 0xfffff500
+#define PWMC WORD_REF(PWMC_ADDR)
+
+#define PWMC_CLKSEL_MASK 0x0007 /* Clock Selection */
+#define PWMC_CLKSEL_SHIFT 0
+#define PWMC_PWMEN 0x0010 /* Enable PWM */
+#define PMNC_POL 0x0020 /* PWM Output Bit Polarity */
+#define PWMC_PIN 0x0080 /* Current PWM output pin status */
+#define PWMC_LOAD 0x0100 /* Force a new period */
+#define PWMC_IRQEN 0x4000 /* Interrupt Request Enable */
+#define PWMC_CLKSRC 0x8000 /* Clock Source Select */
+
+/* 'EZ328-compatible definitions */
+#define PWMC_EN PWMC_PWMEN
+
+/*
+ * PWM Period Register
+ */
+#define PWMP_ADDR 0xfffff502
+#define PWMP WORD_REF(PWMP_ADDR)
+
+/*
+ * PWM Width Register
+ */
+#define PWMW_ADDR 0xfffff504
+#define PWMW WORD_REF(PWMW_ADDR)
+
+/*
+ * PWM Counter Register
+ */
+#define PWMCNT_ADDR 0xfffff506
+#define PWMCNT WORD_REF(PWMCNT_ADDR)
+
+/**********
+ *
+ * 0xFFFFF6xx -- General-Purpose Timers
+ *
+ **********/
+
+/*
+ * Timer Unit 1 and 2 Control Registers
+ */
+#define TCTL1_ADDR 0xfffff600
+#define TCTL1 WORD_REF(TCTL1_ADDR)
+#define TCTL2_ADDR 0xfffff60c
+#define TCTL2 WORD_REF(TCTL2_ADDR)
+
+#define TCTL_TEN 0x0001 /* Timer Enable */
+#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */
+#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */
+#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */
+#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */
+#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */
+#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */
+#define TCTL_IRQEN 0x0010 /* IRQ Enable */
+#define TCTL_OM 0x0020 /* Output Mode */
+#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */
+#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */
+#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */
+#define TCTL_FRR 0x0010 /* Free-Run Mode */
+
+/* 'EZ328-compatible definitions */
+#define TCTL_ADDR TCTL1_ADDR
+#define TCTL TCTL1
+
+/*
+ * Timer Unit 1 and 2 Prescaler Registers
+ */
+#define TPRER1_ADDR 0xfffff602
+#define TPRER1 WORD_REF(TPRER1_ADDR)
+#define TPRER2_ADDR 0xfffff60e
+#define TPRER2 WORD_REF(TPRER2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TPRER_ADDR TPRER1_ADDR
+#define TPRER TPRER1
+
+/*
+ * Timer Unit 1 and 2 Compare Registers
+ */
+#define TCMP1_ADDR 0xfffff604
+#define TCMP1 WORD_REF(TCMP1_ADDR)
+#define TCMP2_ADDR 0xfffff610
+#define TCMP2 WORD_REF(TCMP2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TCMP_ADDR TCMP1_ADDR
+#define TCMP TCMP1
+
+/*
+ * Timer Unit 1 and 2 Capture Registers
+ */
+#define TCR1_ADDR 0xfffff606
+#define TCR1 WORD_REF(TCR1_ADDR)
+#define TCR2_ADDR 0xfffff612
+#define TCR2 WORD_REF(TCR2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TCR_ADDR TCR1_ADDR
+#define TCR TCR1
+
+/*
+ * Timer Unit 1 and 2 Counter Registers
+ */
+#define TCN1_ADDR 0xfffff608
+#define TCN1 WORD_REF(TCN1_ADDR)
+#define TCN2_ADDR 0xfffff614
+#define TCN2 WORD_REF(TCN2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TCN_ADDR TCN1_ADDR
+#define TCN TCN
+
+/*
+ * Timer Unit 1 and 2 Status Registers
+ */
+#define TSTAT1_ADDR 0xfffff60a
+#define TSTAT1 WORD_REF(TSTAT1_ADDR)
+#define TSTAT2_ADDR 0xfffff616
+#define TSTAT2 WORD_REF(TSTAT2_ADDR)
+
+#define TSTAT_COMP 0x0001 /* Compare Event occurred */
+#define TSTAT_CAPT 0x0001 /* Capture Event occurred */
+
+/* 'EZ328-compatible definitions */
+#define TSTAT_ADDR TSTAT1_ADDR
+#define TSTAT TSTAT1
+
+/*
+ * Watchdog Compare Register
+ */
+#define WRR_ADDR 0xfffff61a
+#define WRR WORD_REF(WRR_ADDR)
+
+/*
+ * Watchdog Counter Register
+ */
+#define WCN_ADDR 0xfffff61c
+#define WCN WORD_REF(WCN_ADDR)
+
+/*
+ * Watchdog Control and Status Register
+ */
+#define WCSR_ADDR 0xfffff618
+#define WCSR WORD_REF(WCSR_ADDR)
+
+#define WCSR_WDEN 0x0001 /* Watchdog Enable */
+#define WCSR_FI 0x0002 /* Forced Interrupt (instead of SW reset)*/
+#define WCSR_WRST 0x0004 /* Watchdog Reset */
+
+/**********
+ *
+ * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS)
+ *
+ **********/
+
+/*
+ * SPI Slave Register
+ */
+#define SPISR_ADDR 0xfffff700
+#define SPISR WORD_REF(SPISR_ADDR)
+
+#define SPISR_DATA_ADDR 0xfffff701
+#define SPISR_DATA BYTE_REF(SPISR_DATA_ADDR)
+
+#define SPISR_DATA_MASK 0x00ff /* Shifted data from the external device */
+#define SPISR_DATA_SHIFT 0
+#define SPISR_SPISEN 0x0100 /* SPIS module enable */
+#define SPISR_POL 0x0200 /* SPSCLK polarity control */
+#define SPISR_PHA 0x0400 /* Phase relationship between SPSCLK & SPSRxD */
+#define SPISR_OVWR 0x0800 /* Data buffer has been overwritten */
+#define SPISR_DATARDY 0x1000 /* Data ready */
+#define SPISR_ENPOL 0x2000 /* Enable Polarity */
+#define SPISR_IRQEN 0x4000 /* SPIS IRQ Enable */
+#define SPISR_SPISIRQ 0x8000 /* SPIS IRQ posted */
+
+/**********
+ *
+ * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ *
+ **********/
+
+/*
+ * SPIM Data Register
+ */
+#define SPIMDATA_ADDR 0xfffff800
+#define SPIMDATA WORD_REF(SPIMDATA_ADDR)
+
+/*
+ * SPIM Control/Status Register
+ */
+#define SPIMCONT_ADDR 0xfffff802
+#define SPIMCONT WORD_REF(SPIMCONT_ADDR)
+
+#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */
+#define SPIMCONT_BIT_COUNT_SHIFT 0
+#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */
+#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */
+#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */
+#define SPIMCONT_SPIMIRQ 0x0080 /* Interrupt Request */
+#define SPIMCONT_XCH 0x0100 /* Exchange */
+#define SPIMCONT_RSPIMEN 0x0200 /* Enable SPIM */
+#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */
+#define SPIMCONT_DATA_RATE_SHIFT 13
+
+/* 'EZ328-compatible definitions */
+#define SPIMCONT_IRQ SPIMCONT_SPIMIRQ
+#define SPIMCONT_ENABLE SPIMCONT_SPIMEN
+/**********
+ *
+ * 0xFFFFF9xx -- UART
+ *
+ **********/
+
+/*
+ * UART Status/Control Register
+ */
+#define USTCNT_ADDR 0xfffff900
+#define USTCNT WORD_REF(USTCNT_ADDR)
+
+#define USTCNT_TXAVAILEN 0x0001 /* Transmitter Available Int Enable */
+#define USTCNT_TXHALFEN 0x0002 /* Transmitter Half Empty Int Enable */
+#define USTCNT_TXEMPTYEN 0x0004 /* Transmitter Empty Int Enable */
+#define USTCNT_RXREADYEN 0x0008 /* Receiver Ready Interrupt Enable */
+#define USTCNT_RXHALFEN 0x0010 /* Receiver Half-Full Int Enable */
+#define USTCNT_RXFULLEN 0x0020 /* Receiver Full Interrupt Enable */
+#define USTCNT_CTSDELTAEN 0x0040 /* CTS Delta Interrupt Enable */
+#define USTCNT_GPIODELTAEN 0x0080 /* Old Data Interrupt Enable */
+#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */
+#define USTCNT_STOP 0x0200 /* Stop bit transmission */
+#define USTCNT_ODD_EVEN 0x0400 /* Odd Parity */
+#define USTCNT_PARITYEN 0x0800 /* Parity Enable */
+#define USTCNT_CLKMODE 0x1000 /* Clock Mode Select */
+#define USTCNT_TXEN 0x2000 /* Transmitter Enable */
+#define USTCNT_RXEN 0x4000 /* Receiver Enable */
+#define USTCNT_UARTEN 0x8000 /* UART Enable */
+
+/* 'EZ328-compatible definitions */
+#define USTCNT_TXAE USTCNT_TXAVAILEN
+#define USTCNT_TXHE USTCNT_TXHALFEN
+#define USTCNT_TXEE USTCNT_TXEMPTYEN
+#define USTCNT_RXRE USTCNT_RXREADYEN
+#define USTCNT_RXHE USTCNT_RXHALFEN
+#define USTCNT_RXFE USTCNT_RXFULLEN
+#define USTCNT_CTSD USTCNT_CTSDELTAEN
+#define USTCNT_ODD USTCNT_ODD_EVEN
+#define USTCNT_PEN USTCNT_PARITYEN
+#define USTCNT_CLKM USTCNT_CLKMODE
+#define USTCNT_UEN USTCNT_UARTEN
+
+/*
+ * UART Baud Control Register
+ */
+#define UBAUD_ADDR 0xfffff902
+#define UBAUD WORD_REF(UBAUD_ADDR)
+
+#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
+#define UBAUD_PRESCALER_SHIFT 0
+#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_SHIFT 8
+#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
+#define UBAUD_GPIOSRC 0x1000 /* GPIO source */
+#define UBAUD_GPIODIR 0x2000 /* GPIO Direction */
+#define UBAUD_GPIO 0x4000 /* Current GPIO pin status */
+#define UBAUD_GPIODELTA 0x8000 /* GPIO pin value changed */
+
+/*
+ * UART Receiver Register
+ */
+#define URX_ADDR 0xfffff904
+#define URX WORD_REF(URX_ADDR)
+
+#define URX_RXDATA_ADDR 0xfffff905
+#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR)
+
+#define URX_RXDATA_MASK 0x00ff /* Received data */
+#define URX_RXDATA_SHIFT 0
+#define URX_PARITY_ERROR 0x0100 /* Parity Error */
+#define URX_BREAK 0x0200 /* Break Detected */
+#define URX_FRAME_ERROR 0x0400 /* Framing Error */
+#define URX_OVRUN 0x0800 /* Serial Overrun */
+#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */
+#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */
+#define URX_FIFO_FULL 0x8000 /* FIFO is Full */
+
+/*
+ * UART Transmitter Register
+ */
+#define UTX_ADDR 0xfffff906
+#define UTX WORD_REF(UTX_ADDR)
+
+#define UTX_TXDATA_ADDR 0xfffff907
+#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR)
+
+#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */
+#define UTX_TXDATA_SHIFT 0
+#define UTX_CTS_DELTA 0x0100 /* CTS changed */
+#define UTX_CTS_STATUS 0x0200 /* CTS State */
+#define UTX_IGNORE_CTS 0x0800 /* Ignore CTS */
+#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */
+#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */
+#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */
+#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */
+
+/* 'EZ328-compatible definitions */
+#define UTX_CTS_STAT UTX_CTS_STATUS
+#define UTX_NOCTS UTX_IGNORE_CTS
+
+/*
+ * UART Miscellaneous Register
+ */
+#define UMISC_ADDR 0xfffff908
+#define UMISC WORD_REF(UMISC_ADDR)
+
+#define UMISC_TX_POL 0x0004 /* Transmit Polarity */
+#define UMISC_RX_POL 0x0008 /* Receive Polarity */
+#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */
+#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */
+#define UMISC_RTS 0x0040 /* Set RTS status */
+#define UMISC_RTSCONT 0x0080 /* Choose RTS control */
+#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */
+#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */
+#define UMISC_CLKSRC 0x4000 /* Clock Source */
+
+
+/* generalization of uart control registers to support multiple ports: */
+typedef volatile struct {
+ volatile unsigned short int ustcnt;
+ volatile unsigned short int ubaud;
+ union {
+ volatile unsigned short int w;
+ struct {
+ volatile unsigned char status;
+ volatile unsigned char rxdata;
+ } b;
+ } urx;
+ union {
+ volatile unsigned short int w;
+ struct {
+ volatile unsigned char status;
+ volatile unsigned char txdata;
+ } b;
+ } utx;
+ volatile unsigned short int umisc;
+ volatile unsigned short int pad1;
+ volatile unsigned short int pad2;
+ volatile unsigned short int pad3;
+} __attribute__((packed)) m68328_uart;
+
+
+/**********
+ *
+ * 0xFFFFFAxx -- LCD Controller
+ *
+ **********/
+
+/*
+ * LCD Screen Starting Address Register
+ */
+#define LSSA_ADDR 0xfffffa00
+#define LSSA LONG_REF(LSSA_ADDR)
+
+#define LSSA_SSA_MASK 0xfffffffe /* Bit 0 is reserved */
+
+/*
+ * LCD Virtual Page Width Register
+ */
+#define LVPW_ADDR 0xfffffa05
+#define LVPW BYTE_REF(LVPW_ADDR)
+
+/*
+ * LCD Screen Width Register (not compatible with 'EZ328 !!!)
+ */
+#define LXMAX_ADDR 0xfffffa08
+#define LXMAX WORD_REF(LXMAX_ADDR)
+
+#define LXMAX_XM_MASK 0x02ff /* Bits 0-3 are reserved */
+
+/*
+ * LCD Screen Height Register
+ */
+#define LYMAX_ADDR 0xfffffa0a
+#define LYMAX WORD_REF(LYMAX_ADDR)
+
+#define LYMAX_YM_MASK 0x02ff /* Bits 10-15 are reserved */
+
+/*
+ * LCD Cursor X Position Register
+ */
+#define LCXP_ADDR 0xfffffa18
+#define LCXP WORD_REF(LCXP_ADDR)
+
+#define LCXP_CC_MASK 0xc000 /* Cursor Control */
+#define LCXP_CC_TRAMSPARENT 0x0000
+#define LCXP_CC_BLACK 0x4000
+#define LCXP_CC_REVERSED 0x8000
+#define LCXP_CC_WHITE 0xc000
+#define LCXP_CXP_MASK 0x02ff /* Cursor X position */
+
+/*
+ * LCD Cursor Y Position Register
+ */
+#define LCYP_ADDR 0xfffffa1a
+#define LCYP WORD_REF(LCYP_ADDR)
+
+#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */
+
+/*
+ * LCD Cursor Width and Heigth Register
+ */
+#define LCWCH_ADDR 0xfffffa1c
+#define LCWCH WORD_REF(LCWCH_ADDR)
+
+#define LCWCH_CH_MASK 0x001f /* Cursor Height */
+#define LCWCH_CH_SHIFT 0
+#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */
+#define LCWCH_CW_SHIFT 8
+
+/*
+ * LCD Blink Control Register
+ */
+#define LBLKC_ADDR 0xfffffa1f
+#define LBLKC BYTE_REF(LBLKC_ADDR)
+
+#define LBLKC_BD_MASK 0x7f /* Blink Divisor */
+#define LBLKC_BD_SHIFT 0
+#define LBLKC_BKEN 0x80 /* Blink Enabled */
+
+/*
+ * LCD Panel Interface Configuration Register
+ */
+#define LPICF_ADDR 0xfffffa20
+#define LPICF BYTE_REF(LPICF_ADDR)
+
+#define LPICF_GS_MASK 0x01 /* Gray-Scale Mode */
+#define LPICF_GS_BW 0x00
+#define LPICF_GS_GRAY_4 0x01
+#define LPICF_PBSIZ_MASK 0x06 /* Panel Bus Width */
+#define LPICF_PBSIZ_1 0x00
+#define LPICF_PBSIZ_2 0x02
+#define LPICF_PBSIZ_4 0x04
+
+/*
+ * LCD Polarity Configuration Register
+ */
+#define LPOLCF_ADDR 0xfffffa21
+#define LPOLCF BYTE_REF(LPOLCF_ADDR)
+
+#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */
+#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */
+#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */
+#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */
+
+/*
+ * LACD (LCD Alternate Crystal Direction) Rate Control Register
+ */
+#define LACDRC_ADDR 0xfffffa23
+#define LACDRC BYTE_REF(LACDRC_ADDR)
+
+#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */
+#define LACDRC_ACD_SHIFT 0
+
+/*
+ * LCD Pixel Clock Divider Register
+ */
+#define LPXCD_ADDR 0xfffffa25
+#define LPXCD BYTE_REF(LPXCD_ADDR)
+
+#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */
+#define LPXCD_PCD_SHIFT 0
+
+/*
+ * LCD Clocking Control Register
+ */
+#define LCKCON_ADDR 0xfffffa27
+#define LCKCON BYTE_REF(LCKCON_ADDR)
+
+#define LCKCON_PCDS 0x01 /* Pixel Clock Divider Source Select */
+#define LCKCON_DWIDTH 0x02 /* Display Memory Width */
+#define LCKCON_DWS_MASK 0x3c /* Display Wait-State */
+#define LCKCON_DWS_SHIFT 2
+#define LCKCON_DMA16 0x40 /* DMA burst length */
+#define LCKCON_LCDON 0x80 /* Enable LCD Controller */
+
+/* 'EZ328-compatible definitions */
+#define LCKCON_DW_MASK LCKCON_DWS_MASK
+#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
+
+/*
+ * LCD Last Buffer Address Register
+ */
+#define LLBAR_ADDR 0xfffffa29
+#define LLBAR BYTE_REF(LLBAR_ADDR)
+
+#define LLBAR_LBAR_MASK 0x7f /* Number of memory words to fill 1 line */
+#define LLBAR_LBAR_SHIFT 0
+
+/*
+ * LCD Octet Terminal Count Register
+ */
+#define LOTCR_ADDR 0xfffffa2b
+#define LOTCR BYTE_REF(LOTCR_ADDR)
+
+/*
+ * LCD Panning Offset Register
+ */
+#define LPOSR_ADDR 0xfffffa2d
+#define LPOSR BYTE_REF(LPOSR_ADDR)
+
+#define LPOSR_BOS 0x08 /* Byte offset (for B/W mode only */
+#define LPOSR_POS_MASK 0x07 /* Pixel Offset Code */
+#define LPOSR_POS_SHIFT 0
+
+/*
+ * LCD Frame Rate Control Modulation Register
+ */
+#define LFRCM_ADDR 0xfffffa31
+#define LFRCM BYTE_REF(LFRCM_ADDR)
+
+#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */
+#define LFRCM_YMOD_SHIFT 0
+#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */
+#define LFRCM_XMOD_SHIFT 4
+
+/*
+ * LCD Gray Palette Mapping Register
+ */
+#define LGPMR_ADDR 0xfffffa32
+#define LGPMR WORD_REF(LGPMR_ADDR)
+
+#define LGPMR_GLEVEL3_MASK 0x000f
+#define LGPMR_GLEVEL3_SHIFT 0
+#define LGPMR_GLEVEL2_MASK 0x00f0
+#define LGPMR_GLEVEL2_SHIFT 4
+#define LGPMR_GLEVEL0_MASK 0x0f00
+#define LGPMR_GLEVEL0_SHIFT 8
+#define LGPMR_GLEVEL1_MASK 0xf000
+#define LGPMR_GLEVEL1_SHIFT 12
+
+/**********
+ *
+ * 0xFFFFFBxx -- Real-Time Clock (RTC)
+ *
+ **********/
+
+/*
+ * RTC Hours Minutes and Seconds Register
+ */
+#define RTCTIME_ADDR 0xfffffb00
+#define RTCTIME LONG_REF(RTCTIME_ADDR)
+
+#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */
+#define RTCTIME_SECONDS_SHIFT 0
+#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */
+#define RTCTIME_MINUTES_SHIFT 16
+#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */
+#define RTCTIME_HOURS_SHIFT 24
+
+/*
+ * RTC Alarm Register
+ */
+#define RTCALRM_ADDR 0xfffffb04
+#define RTCALRM LONG_REF(RTCALRM_ADDR)
+
+#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */
+#define RTCALRM_SECONDS_SHIFT 0
+#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */
+#define RTCALRM_MINUTES_SHIFT 16
+#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */
+#define RTCALRM_HOURS_SHIFT 24
+
+/*
+ * RTC Control Register
+ */
+#define RTCCTL_ADDR 0xfffffb0c
+#define RTCCTL WORD_REF(RTCCTL_ADDR)
+
+#define RTCCTL_384 0x0020 /* Crystal Selection */
+#define RTCCTL_ENABLE 0x0080 /* RTC Enable */
+
+/* 'EZ328-compatible definitions */
+#define RTCCTL_XTL RTCCTL_384
+#define RTCCTL_EN RTCCTL_ENABLE
+
+/*
+ * RTC Interrupt Status Register
+ */
+#define RTCISR_ADDR 0xfffffb0e
+#define RTCISR WORD_REF(RTCISR_ADDR)
+
+#define RTCISR_SW 0x0001 /* Stopwatch timed out */
+#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */
+#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */
+#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */
+
+/*
+ * RTC Interrupt Enable Register
+ */
+#define RTCIENR_ADDR 0xfffffb10
+#define RTCIENR WORD_REF(RTCIENR_ADDR)
+
+#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */
+#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */
+#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */
+#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */
+#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */
+
+/*
+ * Stopwatch Minutes Register
+ */
+#define STPWCH_ADDR 0xfffffb12
+#define STPWCH WORD_REF(STPWCH)
+
+#define STPWCH_CNT_MASK 0x00ff /* Stopwatch countdown value */
+#define SPTWCH_CNT_SHIFT 0
+
+#endif /* _MC68328_H_ */
--- /dev/null
+
+/* include/asm-m68knommu/MC68332.h: '332 control registers
+ *
+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
+ *
+ */
+
+#ifndef _MC68332_H_
+#define _MC68332_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+
+#define PORTE_ADDR 0xfffa11
+#define PORTE BYTE_REF(PORTE_ADDR)
+#define DDRE_ADDR 0xfffa15
+#define DDRE BYTE_REF(DDRE_ADDR)
+#define PEPAR_ADDR 0xfffa17
+#define PEPAR BYTE_REF(PEPAR_ADDR)
+
+#define PORTF_ADDR 0xfffa19
+#define PORTF BYTE_REF(PORTF_ADDR)
+#define DDRF_ADDR 0xfffa1d
+#define DDRF BYTE_REF(DDRF_ADDR)
+#define PFPAR_ADDR 0xfffa1f
+#define PFPAR BYTE_REF(PFPAR_ADDR)
+
+#define PORTQS_ADDR 0xfffc15
+#define PORTQS BYTE_REF(PORTQS_ADDR)
+#define DDRQS_ADDR 0xfffc17
+#define DDRQS BYTE_REF(DDRQS_ADDR)
+#define PQSPAR_ADDR 0xfffc16
+#define PQSPAR BYTE_REF(PQSPAR_ADDR)
+
+#define CSPAR0_ADDR 0xFFFA44
+#define CSPAR0 WORD_REF(CSPAR0_ADDR)
+#define CSPAR1_ADDR 0xFFFA46
+#define CSPAR1 WORD_REF(CSPAR1_ADDR)
+#define CSARBT_ADDR 0xFFFA48
+#define CSARBT WORD_REF(CSARBT_ADDR)
+#define CSOPBT_ADDR 0xFFFA4A
+#define CSOPBT WORD_REF(CSOPBT_ADDR)
+#define CSBAR0_ADDR 0xFFFA4C
+#define CSBAR0 WORD_REF(CSBAR0_ADDR)
+#define CSOR0_ADDR 0xFFFA4E
+#define CSOR0 WORD_REF(CSOR0_ADDR)
+#define CSBAR1_ADDR 0xFFFA50
+#define CSBAR1 WORD_REF(CSBAR1_ADDR)
+#define CSOR1_ADDR 0xFFFA52
+#define CSOR1 WORD_REF(CSOR1_ADDR)
+#define CSBAR2_ADDR 0xFFFA54
+#define CSBAR2 WORD_REF(CSBAR2_ADDR)
+#define CSOR2_ADDR 0xFFFA56
+#define CSOR2 WORD_REF(CSOR2_ADDR)
+#define CSBAR3_ADDR 0xFFFA58
+#define CSBAR3 WORD_REF(CSBAR3_ADDR)
+#define CSOR3_ADDR 0xFFFA5A
+#define CSOR3 WORD_REF(CSOR3_ADDR)
+#define CSBAR4_ADDR 0xFFFA5C
+#define CSBAR4 WORD_REF(CSBAR4_ADDR)
+#define CSOR4_ADDR 0xFFFA5E
+#define CSOR4 WORD_REF(CSOR4_ADDR)
+#define CSBAR5_ADDR 0xFFFA60
+#define CSBAR5 WORD_REF(CSBAR5_ADDR)
+#define CSOR5_ADDR 0xFFFA62
+#define CSOR5 WORD_REF(CSOR5_ADDR)
+#define CSBAR6_ADDR 0xFFFA64
+#define CSBAR6 WORD_REF(CSBAR6_ADDR)
+#define CSOR6_ADDR 0xFFFA66
+#define CSOR6 WORD_REF(CSOR6_ADDR)
+#define CSBAR7_ADDR 0xFFFA68
+#define CSBAR7 WORD_REF(CSBAR7_ADDR)
+#define CSOR7_ADDR 0xFFFA6A
+#define CSOR7 WORD_REF(CSOR7_ADDR)
+#define CSBAR8_ADDR 0xFFFA6C
+#define CSBAR8 WORD_REF(CSBAR8_ADDR)
+#define CSOR8_ADDR 0xFFFA6E
+#define CSOR8 WORD_REF(CSOR8_ADDR)
+#define CSBAR9_ADDR 0xFFFA70
+#define CSBAR9 WORD_REF(CSBAR9_ADDR)
+#define CSOR9_ADDR 0xFFFA72
+#define CSOR9 WORD_REF(CSOR9_ADDR)
+#define CSBAR10_ADDR 0xFFFA74
+#define CSBAR10 WORD_REF(CSBAR10_ADDR)
+#define CSOR10_ADDR 0xFFFA76
+#define CSOR10 WORD_REF(CSOR10_ADDR)
+
+#define CSOR_MODE_ASYNC 0x0000
+#define CSOR_MODE_SYNC 0x8000
+#define CSOR_MODE_MASK 0x8000
+#define CSOR_BYTE_DISABLE 0x0000
+#define CSOR_BYTE_UPPER 0x4000
+#define CSOR_BYTE_LOWER 0x2000
+#define CSOR_BYTE_BOTH 0x6000
+#define CSOR_BYTE_MASK 0x6000
+#define CSOR_RW_RSVD 0x0000
+#define CSOR_RW_READ 0x0800
+#define CSOR_RW_WRITE 0x1000
+#define CSOR_RW_BOTH 0x1800
+#define CSOR_RW_MASK 0x1800
+#define CSOR_STROBE_DS 0x0400
+#define CSOR_STROBE_AS 0x0000
+#define CSOR_STROBE_MASK 0x0400
+#define CSOR_DSACK_WAIT(x) (wait << 6)
+#define CSOR_DSACK_FTERM (14 << 6)
+#define CSOR_DSACK_EXTERNAL (15 << 6)
+#define CSOR_DSACK_MASK 0x03c0
+#define CSOR_SPACE_CPU 0x0000
+#define CSOR_SPACE_USER 0x0010
+#define CSOR_SPACE_SU 0x0020
+#define CSOR_SPACE_BOTH 0x0030
+#define CSOR_SPACE_MASK 0x0030
+#define CSOR_IPL_ALL 0x0000
+#define CSOR_IPL_PRIORITY(x) (x << 1)
+#define CSOR_IPL_MASK 0x000e
+#define CSOR_AVEC_ON 0x0001
+#define CSOR_AVEC_OFF 0x0000
+#define CSOR_AVEC_MASK 0x0001
+
+#define CSBAR_ADDR(x) ((addr >> 11) << 3)
+#define CSBAR_ADDR_MASK 0xfff8
+#define CSBAR_BLKSIZE_2K 0x0000
+#define CSBAR_BLKSIZE_8K 0x0001
+#define CSBAR_BLKSIZE_16K 0x0002
+#define CSBAR_BLKSIZE_64K 0x0003
+#define CSBAR_BLKSIZE_128K 0x0004
+#define CSBAR_BLKSIZE_256K 0x0005
+#define CSBAR_BLKSIZE_512K 0x0006
+#define CSBAR_BLKSIZE_1M 0x0007
+#define CSBAR_BLKSIZE_MASK 0x0007
+
+#define CSPAR_DISC 0
+#define CSPAR_ALT 1
+#define CSPAR_CS8 2
+#define CSPAR_CS16 3
+#define CSPAR_MASK 3
+
+#define CSPAR0_CSBOOT(x) (x << 0)
+#define CSPAR0_CS0(x) (x << 2)
+#define CSPAR0_CS1(x) (x << 4)
+#define CSPAR0_CS2(x) (x << 6)
+#define CSPAR0_CS3(x) (x << 8)
+#define CSPAR0_CS4(x) (x << 10)
+#define CSPAR0_CS5(x) (x << 12)
+
+#define CSPAR1_CS6(x) (x << 0)
+#define CSPAR1_CS7(x) (x << 2)
+#define CSPAR1_CS8(x) (x << 4)
+#define CSPAR1_CS9(x) (x << 6)
+#define CSPAR1_CS10(x) (x << 8)
+
+#endif
--- /dev/null
+
+/* include/asm-m68knommu/MC68EZ328.h: 'EZ328 control registers
+ *
+ * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
+ * Bear & Hare Software, Inc.
+ *
+ * Based on include/asm-m68knommu/MC68332.h
+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
+ * The Silver Hammer Group, Ltd.
+ *
+ */
+
+#ifndef _MC68EZ328_H_
+#define _MC68EZ328_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
+#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
+
+/**********
+ *
+ * 0xFFFFF0xx -- System Control
+ *
+ **********/
+
+/*
+ * System Control Register (SCR)
+ */
+#define SCR_ADDR 0xfffff000
+#define SCR BYTE_REF(SCR_ADDR)
+
+#define SCR_WDTH8 0x01 /* 8-Bit Width Select */
+#define SCR_DMAP 0x04 /* Double Map */
+#define SCR_SO 0x08 /* Supervisor Only */
+#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */
+#define SCR_PRV 0x20 /* Privilege Violation */
+#define SCR_WPV 0x40 /* Write Protect Violation */
+#define SCR_BETO 0x80 /* Bus-Error TimeOut */
+
+/*
+ * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
+ */
+#define MRR_ADDR 0xfffff004
+#define MRR LONG_REF(MRR_ADDR)
+
+/**********
+ *
+ * 0xFFFFF1xx -- Chip-Select logic
+ *
+ **********/
+
+/*
+ * Chip Select Group Base Registers
+ */
+#define CSGBA_ADDR 0xfffff100
+#define CSGBB_ADDR 0xfffff102
+
+#define CSGBC_ADDR 0xfffff104
+#define CSGBD_ADDR 0xfffff106
+
+#define CSGBA WORD_REF(CSGBA_ADDR)
+#define CSGBB WORD_REF(CSGBB_ADDR)
+#define CSGBC WORD_REF(CSGBC_ADDR)
+#define CSGBD WORD_REF(CSGBD_ADDR)
+
+/*
+ * Chip Select Registers
+ */
+#define CSA_ADDR 0xfffff110
+#define CSB_ADDR 0xfffff112
+#define CSC_ADDR 0xfffff114
+#define CSD_ADDR 0xfffff116
+
+#define CSA WORD_REF(CSA_ADDR)
+#define CSB WORD_REF(CSB_ADDR)
+#define CSC WORD_REF(CSC_ADDR)
+#define CSD WORD_REF(CSD_ADDR)
+
+#define CSA_EN 0x0001 /* Chip-Select Enable */
+#define CSA_SIZ_MASK 0x000e /* Chip-Select Size */
+#define CSA_SIZ_SHIFT 1
+#define CSA_WS_MASK 0x0070 /* Wait State */
+#define CSA_WS_SHIFT 4
+#define CSA_BSW 0x0080 /* Data Bus Width */
+#define CSA_FLASH 0x0100 /* FLASH Memory Support */
+#define CSA_RO 0x8000 /* Read-Only */
+
+#define CSB_EN 0x0001 /* Chip-Select Enable */
+#define CSB_SIZ_MASK 0x000e /* Chip-Select Size */
+#define CSB_SIZ_SHIFT 1
+#define CSB_WS_MASK 0x0070 /* Wait State */
+#define CSB_WS_SHIFT 4
+#define CSB_BSW 0x0080 /* Data Bus Width */
+#define CSB_FLASH 0x0100 /* FLASH Memory Support */
+#define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
+#define CSB_UPSIZ_SHIFT 11
+#define CSB_ROP 0x2000 /* Readonly if protected */
+#define CSB_SOP 0x4000 /* Supervisor only if protected */
+#define CSB_RO 0x8000 /* Read-Only */
+
+#define CSC_EN 0x0001 /* Chip-Select Enable */
+#define CSC_SIZ_MASK 0x000e /* Chip-Select Size */
+#define CSC_SIZ_SHIFT 1
+#define CSC_WS_MASK 0x0070 /* Wait State */
+#define CSC_WS_SHIFT 4
+#define CSC_BSW 0x0080 /* Data Bus Width */
+#define CSC_FLASH 0x0100 /* FLASH Memory Support */
+#define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
+#define CSC_UPSIZ_SHIFT 11
+#define CSC_ROP 0x2000 /* Readonly if protected */
+#define CSC_SOP 0x4000 /* Supervisor only if protected */
+#define CSC_RO 0x8000 /* Read-Only */
+
+#define CSD_EN 0x0001 /* Chip-Select Enable */
+#define CSD_SIZ_MASK 0x000e /* Chip-Select Size */
+#define CSD_SIZ_SHIFT 1
+#define CSD_WS_MASK 0x0070 /* Wait State */
+#define CSD_WS_SHIFT 4
+#define CSD_BSW 0x0080 /* Data Bus Width */
+#define CSD_FLASH 0x0100 /* FLASH Memory Support */
+#define CSD_DRAM 0x0200 /* Dram Selection */
+#define CSD_COMB 0x0400 /* Combining */
+#define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
+#define CSD_UPSIZ_SHIFT 11
+#define CSD_ROP 0x2000 /* Readonly if protected */
+#define CSD_SOP 0x4000 /* Supervisor only if protected */
+#define CSD_RO 0x8000 /* Read-Only */
+
+/*
+ * Emulation Chip-Select Register
+ */
+#define EMUCS_ADDR 0xfffff118
+#define EMUCS WORD_REF(EMUCS_ADDR)
+
+#define EMUCS_WS_MASK 0x0070
+#define EMUCS_WS_SHIFT 4
+
+/**********
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * PLL Control Register
+ */
+#define PLLCR_ADDR 0xfffff200
+#define PLLCR WORD_REF(PLLCR_ADDR)
+
+#define PLLCR_DISPLL 0x0008 /* Disable PLL */
+#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */
+#define PLLCR_PRESC 0x0020 /* VCO prescaler */
+#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */
+#define PLLCR_SYSCLK_SEL_SHIFT 8
+#define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */
+#define PLLCR_LCDCLK_SEL_SHIFT 11
+
+/* '328-compatible definitions */
+#define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK
+#define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT
+
+/*
+ * PLL Frequency Select Register
+ */
+#define PLLFSR_ADDR 0xfffff202
+#define PLLFSR WORD_REF(PLLFSR_ADDR)
+
+#define PLLFSR_PC_MASK 0x00ff /* P Count */
+#define PLLFSR_PC_SHIFT 0
+#define PLLFSR_QC_MASK 0x0f00 /* Q Count */
+#define PLLFSR_QC_SHIFT 8
+#define PLLFSR_PROT 0x4000 /* Protect P & Q */
+#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */
+
+/*
+ * Power Control Register
+ */
+#define PCTRL_ADDR 0xfffff207
+#define PCTRL BYTE_REF(PCTRL_ADDR)
+
+#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */
+#define PCTRL_WIDTH_SHIFT 0
+#define PCTRL_PCEN 0x80 /* Power Control Enable */
+
+/**********
+ *
+ * 0xFFFFF3xx -- Interrupt Controller
+ *
+ **********/
+
+/*
+ * Interrupt Vector Register
+ */
+#define IVR_ADDR 0xfffff300
+#define IVR BYTE_REF(IVR_ADDR)
+
+#define IVR_VECTOR_MASK 0xF8
+
+/*
+ * Interrupt control Register
+ */
+#define ICR_ADDR 0xfffff302
+#define ICR WORD_REF(ICR_ADDR)
+
+#define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */
+#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */
+#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */
+#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */
+#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */
+#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */
+#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */
+#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */
+#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMR_ADDR 0xfffff304
+#define IMR LONG_REF(IMR_ADDR)
+
+/*
+ * Define the names for bit positions first. This is useful for
+ * request_irq
+ */
+#define SPI_IRQ_NUM 0 /* SPI interrupt */
+#define TMR_IRQ_NUM 1 /* Timer interrupt */
+#define UART_IRQ_NUM 2 /* UART interrupt */
+#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */
+#define RTC_IRQ_NUM 4 /* RTC interrupt */
+#define KB_IRQ_NUM 6 /* Keyboard Interrupt */
+#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */
+#define INT0_IRQ_NUM 8 /* External INT0 */
+#define INT1_IRQ_NUM 9 /* External INT1 */
+#define INT2_IRQ_NUM 10 /* External INT2 */
+#define INT3_IRQ_NUM 11 /* External INT3 */
+#define IRQ1_IRQ_NUM 16 /* IRQ1 */
+#define IRQ2_IRQ_NUM 17 /* IRQ2 */
+#define IRQ3_IRQ_NUM 18 /* IRQ3 */
+#define IRQ6_IRQ_NUM 19 /* IRQ6 */
+#define IRQ5_IRQ_NUM 20 /* IRQ5 */
+#define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */
+#define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define SPIM_IRQ_NUM SPI_IRQ_NUM
+#define TMR1_IRQ_NUM TMR_IRQ_NUM
+
+/*
+ * Here go the bitmasks themselves
+ */
+#define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */
+#define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */
+#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
+#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
+#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */
+#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */
+#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */
+#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */
+#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */
+#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */
+#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */
+#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */
+#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */
+#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */
+#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */
+#define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */
+#define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */
+#define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IMR_MSPIM IMR_MSPI
+#define IMR_MTMR1 IMR_MTMR
+
+/*
+ * Interrupt Status Register
+ */
+#define ISR_ADDR 0xfffff30c
+#define ISR LONG_REF(ISR_ADDR)
+
+#define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */
+#define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */
+#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
+#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
+#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
+#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
+#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */
+#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
+#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
+#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
+#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
+#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
+#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
+#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
+#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
+#define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */
+#define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */
+#define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define ISR_SPIM ISR_SPI
+#define ISR_TMR1 ISR_TMR
+
+/*
+ * Interrupt Pending Register
+ */
+#define IPR_ADDR 0xfffff30c
+#define IPR LONG_REF(IPR_ADDR)
+
+#define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */
+#define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */
+#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
+#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
+#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
+#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
+#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */
+#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
+#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
+#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
+#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
+#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
+#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
+#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
+#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
+#define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */
+#define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */
+#define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IPR_SPIM IPR_SPI
+#define IPR_TMR1 IPR_TMR
+
+/**********
+ *
+ * 0xFFFFF4xx -- Parallel Ports
+ *
+ **********/
+
+/*
+ * Port A
+ */
+#define PADIR_ADDR 0xfffff400 /* Port A direction reg */
+#define PADATA_ADDR 0xfffff401 /* Port A data register */
+#define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */
+
+#define PADIR BYTE_REF(PADIR_ADDR)
+#define PADATA BYTE_REF(PADATA_ADDR)
+#define PAPUEN BYTE_REF(PAPUEN_ADDR)
+
+#define PA(x) (1 << (x))
+
+/*
+ * Port B
+ */
+#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */
+#define PBDATA_ADDR 0xfffff409 /* Port B data register */
+#define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */
+#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */
+
+#define PBDIR BYTE_REF(PBDIR_ADDR)
+#define PBDATA BYTE_REF(PBDATA_ADDR)
+#define PBPUEN BYTE_REF(PBPUEN_ADDR)
+#define PBSEL BYTE_REF(PBSEL_ADDR)
+
+#define PB(x) (1 << (x))
+
+#define PB_CSB0 0x01 /* Use CSB0 as PB[0] */
+#define PB_CSB1 0x02 /* Use CSB1 as PB[1] */
+#define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */
+#define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */
+#define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */
+#define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */
+#define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */
+#define PB_PWMO 0x80 /* Use PWMO as PB[7] */
+
+/*
+ * Port C
+ */
+#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */
+#define PCDATA_ADDR 0xfffff411 /* Port C data register */
+#define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */
+#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */
+
+#define PCDIR BYTE_REF(PCDIR_ADDR)
+#define PCDATA BYTE_REF(PCDATA_ADDR)
+#define PCPDEN BYTE_REF(PCPDEN_ADDR)
+#define PCSEL BYTE_REF(PCSEL_ADDR)
+
+#define PC(x) (1 << (x))
+
+#define PC_LD0 0x01 /* Use LD0 as PC[0] */
+#define PC_LD1 0x02 /* Use LD1 as PC[1] */
+#define PC_LD2 0x04 /* Use LD2 as PC[2] */
+#define PC_LD3 0x08 /* Use LD3 as PC[3] */
+#define PC_LFLM 0x10 /* Use LFLM as PC[4] */
+#define PC_LLP 0x20 /* Use LLP as PC[5] */
+#define PC_LCLK 0x40 /* Use LCLK as PC[6] */
+#define PC_LACD 0x80 /* Use LACD as PC[7] */
+
+/*
+ * Port D
+ */
+#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */
+#define PDDATA_ADDR 0xfffff419 /* Port D data register */
+#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */
+#define PDSEL_ADDR 0xfffff41b /* Port D Select Register */
+#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */
+#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */
+#define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */
+#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */
+
+#define PDDIR BYTE_REF(PDDIR_ADDR)
+#define PDDATA BYTE_REF(PDDATA_ADDR)
+#define PDPUEN BYTE_REF(PDPUEN_ADDR)
+#define PDSEL BYTE_REF(PDSEL_ADDR)
+#define PDPOL BYTE_REF(PDPOL_ADDR)
+#define PDIRQEN BYTE_REF(PDIRQEN_ADDR)
+#define PDKBEN BYTE_REF(PDKBEN_ADDR)
+#define PDIQEG BYTE_REF(PDIQEG_ADDR)
+
+#define PD(x) (1 << (x))
+
+#define PD_INT0 0x01 /* Use INT0 as PD[0] */
+#define PD_INT1 0x02 /* Use INT1 as PD[1] */
+#define PD_INT2 0x04 /* Use INT2 as PD[2] */
+#define PD_INT3 0x08 /* Use INT3 as PD[3] */
+#define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */
+#define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */
+#define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */
+#define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */
+
+/*
+ * Port E
+ */
+#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */
+#define PEDATA_ADDR 0xfffff421 /* Port E data register */
+#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */
+#define PESEL_ADDR 0xfffff423 /* Port E Select Register */
+
+#define PEDIR BYTE_REF(PEDIR_ADDR)
+#define PEDATA BYTE_REF(PEDATA_ADDR)
+#define PEPUEN BYTE_REF(PEPUEN_ADDR)
+#define PESEL BYTE_REF(PESEL_ADDR)
+
+#define PE(x) (1 << (x))
+
+#define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */
+#define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */
+#define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */
+#define PE_DWE 0x08 /* Use DWE as PE[3] */
+#define PE_RXD 0x10 /* Use RXD as PE[4] */
+#define PE_TXD 0x20 /* Use TXD as PE[5] */
+#define PE_RTS 0x40 /* Use RTS as PE[6] */
+#define PE_CTS 0x80 /* Use CTS as PE[7] */
+
+/*
+ * Port F
+ */
+#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */
+#define PFDATA_ADDR 0xfffff429 /* Port F data register */
+#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */
+#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */
+
+#define PFDIR BYTE_REF(PFDIR_ADDR)
+#define PFDATA BYTE_REF(PFDATA_ADDR)
+#define PFPUEN BYTE_REF(PFPUEN_ADDR)
+#define PFSEL BYTE_REF(PFSEL_ADDR)
+
+#define PF(x) (1 << (x))
+
+#define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */
+#define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */
+#define PF_CLKO 0x04 /* Use CLKO as PF[2] */
+#define PF_A20 0x08 /* Use A20 as PF[3] */
+#define PF_A21 0x10 /* Use A21 as PF[4] */
+#define PF_A22 0x20 /* Use A22 as PF[5] */
+#define PF_A23 0x40 /* Use A23 as PF[6] */
+#define PF_CSA1 0x80 /* Use CSA1 as PF[7] */
+
+/*
+ * Port G
+ */
+#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */
+#define PGDATA_ADDR 0xfffff431 /* Port G data register */
+#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */
+#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */
+
+#define PGDIR BYTE_REF(PGDIR_ADDR)
+#define PGDATA BYTE_REF(PGDATA_ADDR)
+#define PGPUEN BYTE_REF(PGPUEN_ADDR)
+#define PGSEL BYTE_REF(PGSEL_ADDR)
+
+#define PG(x) (1 << (x))
+
+#define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */
+#define PG_A0 0x02 /* Use A0 as PG[1] */
+#define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */
+#define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */
+#define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */
+#define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */
+
+/**********
+ *
+ * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
+ *
+ **********/
+
+/*
+ * PWM Control Register
+ */
+#define PWMC_ADDR 0xfffff500
+#define PWMC WORD_REF(PWMC_ADDR)
+
+#define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */
+#define PWMC_CLKSEL_SHIFT 0
+#define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */
+#define PWMC_REPEAT_SHIFT 2
+#define PWMC_EN 0x0010 /* Enable PWM */
+#define PMNC_FIFOAV 0x0020 /* FIFO Available */
+#define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */
+#define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */
+#define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */
+#define PWMC_PRESCALER_SHIFT 8
+#define PWMC_CLKSRC 0x8000 /* Clock Source Select */
+
+/* '328-compatible definitions */
+#define PWMC_PWMEN PWMC_EN
+
+/*
+ * PWM Sample Register
+ */
+#define PWMS_ADDR 0xfffff502
+#define PWMS WORD_REF(PWMS_ADDR)
+
+/*
+ * PWM Period Register
+ */
+#define PWMP_ADDR 0xfffff504
+#define PWMP BYTE_REF(PWMP_ADDR)
+
+/*
+ * PWM Counter Register
+ */
+#define PWMCNT_ADDR 0xfffff505
+#define PWMCNT BYTE_REF(PWMCNT_ADDR)
+
+/**********
+ *
+ * 0xFFFFF6xx -- General-Purpose Timer
+ *
+ **********/
+
+/*
+ * Timer Control register
+ */
+#define TCTL_ADDR 0xfffff600
+#define TCTL WORD_REF(TCTL_ADDR)
+
+#define TCTL_TEN 0x0001 /* Timer Enable */
+#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */
+#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */
+#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */
+#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */
+#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */
+#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */
+#define TCTL_IRQEN 0x0010 /* IRQ Enable */
+#define TCTL_OM 0x0020 /* Output Mode */
+#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */
+#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */
+#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */
+#define TCTL_FRR 0x0010 /* Free-Run Mode */
+
+/* '328-compatible definitions */
+#define TCTL1_ADDR TCTL_ADDR
+#define TCTL1 TCTL
+
+/*
+ * Timer Prescaler Register
+ */
+#define TPRER_ADDR 0xfffff602
+#define TPRER WORD_REF(TPRER_ADDR)
+
+/* '328-compatible definitions */
+#define TPRER1_ADDR TPRER_ADDR
+#define TPRER1 TPRER
+
+/*
+ * Timer Compare Register
+ */
+#define TCMP_ADDR 0xfffff604
+#define TCMP WORD_REF(TCMP_ADDR)
+
+/* '328-compatible definitions */
+#define TCMP1_ADDR TCMP_ADDR
+#define TCMP1 TCMP
+
+/*
+ * Timer Capture register
+ */
+#define TCR_ADDR 0xfffff606
+#define TCR WORD_REF(TCR_ADDR)
+
+/* '328-compatible definitions */
+#define TCR1_ADDR TCR_ADDR
+#define TCR1 TCR
+
+/*
+ * Timer Counter Register
+ */
+#define TCN_ADDR 0xfffff608
+#define TCN WORD_REF(TCN_ADDR)
+
+/* '328-compatible definitions */
+#define TCN1_ADDR TCN_ADDR
+#define TCN1 TCN
+
+/*
+ * Timer Status Register
+ */
+#define TSTAT_ADDR 0xfffff60a
+#define TSTAT WORD_REF(TSTAT_ADDR)
+
+#define TSTAT_COMP 0x0001 /* Compare Event occurred */
+#define TSTAT_CAPT 0x0001 /* Capture Event occurred */
+
+/* '328-compatible definitions */
+#define TSTAT1_ADDR TSTAT_ADDR
+#define TSTAT1 TSTAT
+
+/**********
+ *
+ * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ *
+ **********/
+
+/*
+ * SPIM Data Register
+ */
+#define SPIMDATA_ADDR 0xfffff800
+#define SPIMDATA WORD_REF(SPIMDATA_ADDR)
+
+/*
+ * SPIM Control/Status Register
+ */
+#define SPIMCONT_ADDR 0xfffff802
+#define SPIMCONT WORD_REF(SPIMCONT_ADDR)
+
+#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */
+#define SPIMCONT_BIT_COUNT_SHIFT 0
+#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */
+#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */
+#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */
+#define SPIMCONT_IRQ 0x0080 /* Interrupt Request */
+#define SPIMCONT_XCH 0x0100 /* Exchange */
+#define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */
+#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */
+#define SPIMCONT_DATA_RATE_SHIFT 13
+
+/* '328-compatible definitions */
+#define SPIMCONT_SPIMIRQ SPIMCONT_IRQ
+#define SPIMCONT_SPIMEN SPIMCONT_ENABLE
+
+/**********
+ *
+ * 0xFFFFF9xx -- UART
+ *
+ **********/
+
+/*
+ * UART Status/Control Register
+ */
+#define USTCNT_ADDR 0xfffff900
+#define USTCNT WORD_REF(USTCNT_ADDR)
+
+#define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */
+#define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */
+#define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */
+#define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */
+#define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */
+#define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */
+#define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */
+#define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */
+#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */
+#define USTCNT_STOP 0x0200 /* Stop bit transmission */
+#define USTCNT_ODD 0x0400 /* Odd Parity */
+#define USTCNT_PEN 0x0800 /* Parity Enable */
+#define USTCNT_CLKM 0x1000 /* Clock Mode Select */
+#define USTCNT_TXEN 0x2000 /* Transmitter Enable */
+#define USTCNT_RXEN 0x4000 /* Receiver Enable */
+#define USTCNT_UEN 0x8000 /* UART Enable */
+
+/* '328-compatible definitions */
+#define USTCNT_TXAVAILEN USTCNT_TXAE
+#define USTCNT_TXHALFEN USTCNT_TXHE
+#define USTCNT_TXEMPTYEN USTCNT_TXEE
+#define USTCNT_RXREADYEN USTCNT_RXRE
+#define USTCNT_RXHALFEN USTCNT_RXHE
+#define USTCNT_RXFULLEN USTCNT_RXFE
+#define USTCNT_CTSDELTAEN USTCNT_CTSD
+#define USTCNT_ODD_EVEN USTCNT_ODD
+#define USTCNT_PARITYEN USTCNT_PEN
+#define USTCNT_CLKMODE USTCNT_CLKM
+#define USTCNT_UARTEN USTCNT_UEN
+
+/*
+ * UART Baud Control Register
+ */
+#define UBAUD_ADDR 0xfffff902
+#define UBAUD WORD_REF(UBAUD_ADDR)
+
+#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
+#define UBAUD_PRESCALER_SHIFT 0
+#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_SHIFT 8
+#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
+#define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */
+
+/*
+ * UART Receiver Register
+ */
+#define URX_ADDR 0xfffff904
+#define URX WORD_REF(URX_ADDR)
+
+#define URX_RXDATA_ADDR 0xfffff905
+#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR)
+
+#define URX_RXDATA_MASK 0x00ff /* Received data */
+#define URX_RXDATA_SHIFT 0
+#define URX_PARITY_ERROR 0x0100 /* Parity Error */
+#define URX_BREAK 0x0200 /* Break Detected */
+#define URX_FRAME_ERROR 0x0400 /* Framing Error */
+#define URX_OVRUN 0x0800 /* Serial Overrun */
+#define URX_OLD_DATA 0x1000 /* Old data in FIFO */
+#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */
+#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */
+#define URX_FIFO_FULL 0x8000 /* FIFO is Full */
+
+/*
+ * UART Transmitter Register
+ */
+#define UTX_ADDR 0xfffff906
+#define UTX WORD_REF(UTX_ADDR)
+
+#define UTX_TXDATA_ADDR 0xfffff907
+#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR)
+
+#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */
+#define UTX_TXDATA_SHIFT 0
+#define UTX_CTS_DELTA 0x0100 /* CTS changed */
+#define UTX_CTS_STAT 0x0200 /* CTS State */
+#define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */
+#define UTX_NOCTS 0x0800 /* Ignore CTS */
+#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */
+#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */
+#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */
+#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */
+
+/* '328-compatible definitions */
+#define UTX_CTS_STATUS UTX_CTS_STAT
+#define UTX_IGNORE_CTS UTX_NOCTS
+
+/*
+ * UART Miscellaneous Register
+ */
+#define UMISC_ADDR 0xfffff908
+#define UMISC WORD_REF(UMISC_ADDR)
+
+#define UMISC_TX_POL 0x0004 /* Transmit Polarity */
+#define UMISC_RX_POL 0x0008 /* Receive Polarity */
+#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */
+#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */
+#define UMISC_RTS 0x0040 /* Set RTS status */
+#define UMISC_RTSCONT 0x0080 /* Choose RTS control */
+#define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */
+#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */
+#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */
+#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */
+#define UMISC_CLKSRC 0x4000 /* Clock Source */
+#define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */
+
+/*
+ * UART Non-integer Prescaler Register
+ */
+#define NIPR_ADDR 0xfffff90a
+#define NIPR WORD_REF(NIPR_ADDR)
+
+#define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */
+#define NIPR_STEP_VALUE_SHIFT 0
+#define NIPR_SELECT_MASK 0x0700 /* Tap Selection */
+#define NIPR_SELECT_SHIFT 8
+#define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */
+
+
+/* generalization of uart control registers to support multiple ports: */
+typedef volatile struct {
+ volatile unsigned short int ustcnt;
+ volatile unsigned short int ubaud;
+ union {
+ volatile unsigned short int w;
+ struct {
+ volatile unsigned char status;
+ volatile unsigned char rxdata;
+ } b;
+ } urx;
+ union {
+ volatile unsigned short int w;
+ struct {
+ volatile unsigned char status;
+ volatile unsigned char txdata;
+ } b;
+ } utx;
+ volatile unsigned short int umisc;
+ volatile unsigned short int nipr;
+ volatile unsigned short int pad1;
+ volatile unsigned short int pad2;
+} __attribute__((packed)) m68328_uart;
+
+
+/**********
+ *
+ * 0xFFFFFAxx -- LCD Controller
+ *
+ **********/
+
+/*
+ * LCD Screen Starting Address Register
+ */
+#define LSSA_ADDR 0xfffffa00
+#define LSSA LONG_REF(LSSA_ADDR)
+
+#define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */
+
+/*
+ * LCD Virtual Page Width Register
+ */
+#define LVPW_ADDR 0xfffffa05
+#define LVPW BYTE_REF(LVPW_ADDR)
+
+/*
+ * LCD Screen Width Register (not compatible with '328 !!!)
+ */
+#define LXMAX_ADDR 0xfffffa08
+#define LXMAX WORD_REF(LXMAX_ADDR)
+
+#define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */
+
+/*
+ * LCD Screen Height Register
+ */
+#define LYMAX_ADDR 0xfffffa0a
+#define LYMAX WORD_REF(LYMAX_ADDR)
+
+#define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */
+
+/*
+ * LCD Cursor X Position Register
+ */
+#define LCXP_ADDR 0xfffffa18
+#define LCXP WORD_REF(LCXP_ADDR)
+
+#define LCXP_CC_MASK 0xc000 /* Cursor Control */
+#define LCXP_CC_TRAMSPARENT 0x0000
+#define LCXP_CC_BLACK 0x4000
+#define LCXP_CC_REVERSED 0x8000
+#define LCXP_CC_WHITE 0xc000
+#define LCXP_CXP_MASK 0x02ff /* Cursor X position */
+
+/*
+ * LCD Cursor Y Position Register
+ */
+#define LCYP_ADDR 0xfffffa1a
+#define LCYP WORD_REF(LCYP_ADDR)
+
+#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */
+
+/*
+ * LCD Cursor Width and Heigth Register
+ */
+#define LCWCH_ADDR 0xfffffa1c
+#define LCWCH WORD_REF(LCWCH_ADDR)
+
+#define LCWCH_CH_MASK 0x001f /* Cursor Height */
+#define LCWCH_CH_SHIFT 0
+#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */
+#define LCWCH_CW_SHIFT 8
+
+/*
+ * LCD Blink Control Register
+ */
+#define LBLKC_ADDR 0xfffffa1f
+#define LBLKC BYTE_REF(LBLKC_ADDR)
+
+#define LBLKC_BD_MASK 0x7f /* Blink Divisor */
+#define LBLKC_BD_SHIFT 0
+#define LBLKC_BKEN 0x80 /* Blink Enabled */
+
+/*
+ * LCD Panel Interface Configuration Register
+ */
+#define LPICF_ADDR 0xfffffa20
+#define LPICF BYTE_REF(LPICF_ADDR)
+
+#define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */
+#define LPICF_GS_BW 0x00
+#define LPICF_GS_GRAY_4 0x01
+#define LPICF_GS_GRAY_16 0x02
+#define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */
+#define LPICF_PBSIZ_1 0x00
+#define LPICF_PBSIZ_2 0x04
+#define LPICF_PBSIZ_4 0x08
+
+/*
+ * LCD Polarity Configuration Register
+ */
+#define LPOLCF_ADDR 0xfffffa21
+#define LPOLCF BYTE_REF(LPOLCF_ADDR)
+
+#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */
+#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */
+#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */
+#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */
+
+/*
+ * LACD (LCD Alternate Crystal Direction) Rate Control Register
+ */
+#define LACDRC_ADDR 0xfffffa23
+#define LACDRC BYTE_REF(LACDRC_ADDR)
+
+#define LACDRC_ACDSLT 0x80 /* Signal Source Select */
+#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */
+#define LACDRC_ACD_SHIFT 0
+
+/*
+ * LCD Pixel Clock Divider Register
+ */
+#define LPXCD_ADDR 0xfffffa25
+#define LPXCD BYTE_REF(LPXCD_ADDR)
+
+#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */
+#define LPXCD_PCD_SHIFT 0
+
+/*
+ * LCD Clocking Control Register
+ */
+#define LCKCON_ADDR 0xfffffa27
+#define LCKCON BYTE_REF(LCKCON_ADDR)
+
+#define LCKCON_DWS_MASK 0x0f /* Display Wait-State */
+#define LCKCON_DWS_SHIFT 0
+#define LCKCON_DWIDTH 0x40 /* Display Memory Width */
+#define LCKCON_LCDON 0x80 /* Enable LCD Controller */
+
+/* '328-compatible definitions */
+#define LCKCON_DW_MASK LCKCON_DWS_MASK
+#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
+
+/*
+ * LCD Refresh Rate Adjustment Register
+ */
+#define LRRA_ADDR 0xfffffa29
+#define LRRA BYTE_REF(LRRA_ADDR)
+
+/*
+ * LCD Panning Offset Register
+ */
+#define LPOSR_ADDR 0xfffffa2d
+#define LPOSR BYTE_REF(LPOSR_ADDR)
+
+#define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */
+#define LPOSR_POS_SHIFT 0
+
+/*
+ * LCD Frame Rate Control Modulation Register
+ */
+#define LFRCM_ADDR 0xfffffa31
+#define LFRCM BYTE_REF(LFRCM_ADDR)
+
+#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */
+#define LFRCM_YMOD_SHIFT 0
+#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */
+#define LFRCM_XMOD_SHIFT 4
+
+/*
+ * LCD Gray Palette Mapping Register
+ */
+#define LGPMR_ADDR 0xfffffa33
+#define LGPMR BYTE_REF(LGPMR_ADDR)
+
+#define LGPMR_G1_MASK 0x0f
+#define LGPMR_G1_SHIFT 0
+#define LGPMR_G2_MASK 0xf0
+#define LGPMR_G2_SHIFT 4
+
+/*
+ * PWM Contrast Control Register
+ */
+#define PWMR_ADDR 0xfffffa36
+#define PWMR WORD_REF(PWMR_ADDR)
+
+#define PWMR_PW_MASK 0x00ff /* Pulse Width */
+#define PWMR_PW_SHIFT 0
+#define PWMR_CCPEN 0x0100 /* Contrast Control Enable */
+#define PWMR_SRC_MASK 0x0600 /* Input Clock Source */
+#define PWMR_SRC_LINE 0x0000 /* Line Pulse */
+#define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */
+#define PWMR_SRC_LCD 0x4000 /* LCD clock */
+
+/**********
+ *
+ * 0xFFFFFBxx -- Real-Time Clock (RTC)
+ *
+ **********/
+
+/*
+ * RTC Hours Minutes and Seconds Register
+ */
+#define RTCTIME_ADDR 0xfffffb00
+#define RTCTIME LONG_REF(RTCTIME_ADDR)
+
+#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */
+#define RTCTIME_SECONDS_SHIFT 0
+#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */
+#define RTCTIME_MINUTES_SHIFT 16
+#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */
+#define RTCTIME_HOURS_SHIFT 24
+
+/*
+ * RTC Alarm Register
+ */
+#define RTCALRM_ADDR 0xfffffb04
+#define RTCALRM LONG_REF(RTCALRM_ADDR)
+
+#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */
+#define RTCALRM_SECONDS_SHIFT 0
+#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */
+#define RTCALRM_MINUTES_SHIFT 16
+#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */
+#define RTCALRM_HOURS_SHIFT 24
+
+/*
+ * Watchdog Timer Register
+ */
+#define WATCHDOG_ADDR 0xfffffb0a
+#define WATCHDOG WORD_REF(WATCHDOG_ADDR)
+
+#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */
+#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */
+#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */
+#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */
+#define WATCHDOG_CNT_SHIFT 8
+
+/*
+ * RTC Control Register
+ */
+#define RTCCTL_ADDR 0xfffffb0c
+#define RTCCTL WORD_REF(RTCCTL_ADDR)
+
+#define RTCCTL_XTL 0x0020 /* Crystal Selection */
+#define RTCCTL_EN 0x0080 /* RTC Enable */
+
+/* '328-compatible definitions */
+#define RTCCTL_384 RTCCTL_XTL
+#define RTCCTL_ENABLE RTCCTL_EN
+
+/*
+ * RTC Interrupt Status Register
+ */
+#define RTCISR_ADDR 0xfffffb0e
+#define RTCISR WORD_REF(RTCISR_ADDR)
+
+#define RTCISR_SW 0x0001 /* Stopwatch timed out */
+#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */
+#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */
+#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */
+#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */
+#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */
+#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */
+#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */
+#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */
+#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */
+#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */
+#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */
+#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */
+
+/*
+ * RTC Interrupt Enable Register
+ */
+#define RTCIENR_ADDR 0xfffffb10
+#define RTCIENR WORD_REF(RTCIENR_ADDR)
+
+#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */
+#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */
+#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */
+#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */
+#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */
+#define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */
+#define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */
+#define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */
+#define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */
+#define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */
+#define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */
+#define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */
+#define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */
+#define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */
+
+/*
+ * Stopwatch Minutes Register
+ */
+#define STPWCH_ADDR 0xfffffb12
+#define STPWCH WORD_REF(STPWCH)
+
+#define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */
+#define SPTWCH_CNT_SHIFT 0
+
+/*
+ * RTC Day Count Register
+ */
+#define DAYR_ADDR 0xfffffb1a
+#define DAYR WORD_REF(DAYR_ADDR)
+
+#define DAYR_DAYS_MASK 0x1ff /* Day Setting */
+#define DAYR_DAYS_SHIFT 0
+
+/*
+ * RTC Day Alarm Register
+ */
+#define DAYALARM_ADDR 0xfffffb1c
+#define DAYALARM WORD_REF(DAYALARM_ADDR)
+
+#define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */
+#define DAYALARM_DAYSAL_SHIFT 0
+
+/**********
+ *
+ * 0xFFFFFCxx -- DRAM Controller
+ *
+ **********/
+
+/*
+ * DRAM Memory Configuration Register
+ */
+#define DRAMMC_ADDR 0xfffffc00
+#define DRAMMC WORD_REF(DRAMMC_ADDR)
+
+#define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */
+#define DRAMMC_ROW12_PA10 0x0000
+#define DRAMMC_ROW12_PA21 0x4000
+#define DRAMMC_ROW12_PA23 0x8000
+#define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */
+#define DRAMMC_ROW0_PA11 0x0000
+#define DRAMMC_ROW0_PA22 0x1000
+#define DRAMMC_ROW0_PA23 0x2000
+#define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */
+#define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */
+#define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */
+#define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */
+#define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */
+#define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */
+#define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */
+#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */
+#define DRAMMC_REF_SHIFT 0
+
+/*
+ * DRAM Control Register
+ */
+#define DRAMC_ADDR 0xfffffc02
+#define DRAMC WORD_REF(DRAMC_ADDR)
+
+#define DRAMC_DWE 0x0001 /* DRAM Write Enable */
+#define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */
+#define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */
+#define DRAMC_SLW 0x0008 /* Slow RAM */
+#define DRAMC_LSP 0x0010 /* Light Sleep */
+#define DRAMC_MSW 0x0020 /* Slow Multiplexing */
+#define DRAMC_WS_MASK 0x00c0 /* Wait-states */
+#define DRAMC_WS_SHIFT 6
+#define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */
+#define DRAMC_PGSZ_SHIFT 8
+#define DRAMC_PGSZ_256K 0x0000
+#define DRAMC_PGSZ_512K 0x0100
+#define DRAMC_PGSZ_1024K 0x0200
+#define DRAMC_PGSZ_2048K 0x0300
+#define DRAMC_EDO 0x0400 /* EDO DRAM */
+#define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */
+#define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */
+#define DRAMC_BC_SHIFT 12
+#define DRAMC_RM 0x4000 /* Refresh Mode */
+#define DRAMC_EN 0x8000 /* DRAM Controller enable */
+
+
+/**********
+ *
+ * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
+ *
+ **********/
+
+/*
+ * ICE Module Address Compare Register
+ */
+#define ICEMACR_ADDR 0xfffffd00
+#define ICEMACR LONG_REF(ICEMACR_ADDR)
+
+/*
+ * ICE Module Address Mask Register
+ */
+#define ICEMAMR_ADDR 0xfffffd04
+#define ICEMAMR LONG_REF(ICEMAMR_ADDR)
+
+/*
+ * ICE Module Control Compare Register
+ */
+#define ICEMCCR_ADDR 0xfffffd08
+#define ICEMCCR WORD_REF(ICEMCCR_ADDR)
+
+#define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */
+#define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */
+
+/*
+ * ICE Module Control Mask Register
+ */
+#define ICEMCMR_ADDR 0xfffffd0a
+#define ICEMCMR WORD_REF(ICEMCMR_ADDR)
+
+#define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */
+#define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */
+
+/*
+ * ICE Module Control Register
+ */
+#define ICEMCR_ADDR 0xfffffd0c
+#define ICEMCR WORD_REF(ICEMCR_ADDR)
+
+#define ICEMCR_CEN 0x0001 /* Compare Enable */
+#define ICEMCR_PBEN 0x0002 /* Program Break Enable */
+#define ICEMCR_SB 0x0004 /* Single Breakpoint */
+#define ICEMCR_HMDIS 0x0008 /* HardMap disable */
+#define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */
+
+/*
+ * ICE Module Status Register
+ */
+#define ICEMSR_ADDR 0xfffffd0e
+#define ICEMSR WORD_REF(ICEMSR_ADDR)
+
+#define ICEMSR_EMUEN 0x0001 /* Emulation Enable */
+#define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */
+#define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */
+#define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */
+
+#endif /* _MC68EZ328_H_ */
--- /dev/null
+
+/* include/asm-m68knommu/MC68VZ328.h: 'VZ328 control registers
+ *
+ * Copyright (c) 2000-2001 Lineo Inc. <www.lineo.com>
+ * Copyright (c) 2000-2001 Lineo Canada Corp. <www.lineo.ca>
+ * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
+ * Bare & Hare Software, Inc.
+ * Based on include/asm-m68knommu/MC68332.h
+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
+ * The Silver Hammer Group, Ltd.
+ *
+ * M68VZ328 fixes by Evan Stawnyczy <evan@lineo.com>
+ * vz multiport fixes by Michael Leslie <mleslie@lineo.com>
+ */
+
+#ifndef _MC68VZ328_H_
+#define _MC68VZ328_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
+#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
+
+/**********
+ *
+ * 0xFFFFF0xx -- System Control
+ *
+ **********/
+
+/*
+ * System Control Register (SCR)
+ */
+#define SCR_ADDR 0xfffff000
+#define SCR BYTE_REF(SCR_ADDR)
+
+#define SCR_WDTH8 0x01 /* 8-Bit Width Select */
+#define SCR_DMAP 0x04 /* Double Map */
+#define SCR_SO 0x08 /* Supervisor Only */
+#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */
+#define SCR_PRV 0x20 /* Privilege Violation */
+#define SCR_WPV 0x40 /* Write Protect Violation */
+#define SCR_BETO 0x80 /* Bus-Error TimeOut */
+
+/*
+ * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
+ */
+#define MRR_ADDR 0xfffff004
+#define MRR LONG_REF(MRR_ADDR)
+
+/**********
+ *
+ * 0xFFFFF1xx -- Chip-Select logic
+ *
+ **********/
+
+/*
+ * Chip Select Group Base Registers
+ */
+#define CSGBA_ADDR 0xfffff100
+#define CSGBB_ADDR 0xfffff102
+
+#define CSGBC_ADDR 0xfffff104
+#define CSGBD_ADDR 0xfffff106
+
+#define CSGBA WORD_REF(CSGBA_ADDR)
+#define CSGBB WORD_REF(CSGBB_ADDR)
+#define CSGBC WORD_REF(CSGBC_ADDR)
+#define CSGBD WORD_REF(CSGBD_ADDR)
+
+/*
+ * Chip Select Registers
+ */
+#define CSA_ADDR 0xfffff110
+#define CSB_ADDR 0xfffff112
+#define CSC_ADDR 0xfffff114
+#define CSD_ADDR 0xfffff116
+
+#define CSA WORD_REF(CSA_ADDR)
+#define CSB WORD_REF(CSB_ADDR)
+#define CSC WORD_REF(CSC_ADDR)
+#define CSD WORD_REF(CSD_ADDR)
+
+#define CSA_EN 0x0001 /* Chip-Select Enable */
+#define CSA_SIZ_MASK 0x000e /* Chip-Select Size */
+#define CSA_SIZ_SHIFT 1
+#define CSA_WS_MASK 0x0070 /* Wait State */
+#define CSA_WS_SHIFT 4
+#define CSA_BSW 0x0080 /* Data Bus Width */
+#define CSA_FLASH 0x0100 /* FLASH Memory Support */
+#define CSA_RO 0x8000 /* Read-Only */
+
+#define CSB_EN 0x0001 /* Chip-Select Enable */
+#define CSB_SIZ_MASK 0x000e /* Chip-Select Size */
+#define CSB_SIZ_SHIFT 1
+#define CSB_WS_MASK 0x0070 /* Wait State */
+#define CSB_WS_SHIFT 4
+#define CSB_BSW 0x0080 /* Data Bus Width */
+#define CSB_FLASH 0x0100 /* FLASH Memory Support */
+#define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
+#define CSB_UPSIZ_SHIFT 11
+#define CSB_ROP 0x2000 /* Readonly if protected */
+#define CSB_SOP 0x4000 /* Supervisor only if protected */
+#define CSB_RO 0x8000 /* Read-Only */
+
+#define CSC_EN 0x0001 /* Chip-Select Enable */
+#define CSC_SIZ_MASK 0x000e /* Chip-Select Size */
+#define CSC_SIZ_SHIFT 1
+#define CSC_WS_MASK 0x0070 /* Wait State */
+#define CSC_WS_SHIFT 4
+#define CSC_BSW 0x0080 /* Data Bus Width */
+#define CSC_FLASH 0x0100 /* FLASH Memory Support */
+#define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
+#define CSC_UPSIZ_SHIFT 11
+#define CSC_ROP 0x2000 /* Readonly if protected */
+#define CSC_SOP 0x4000 /* Supervisor only if protected */
+#define CSC_RO 0x8000 /* Read-Only */
+
+#define CSD_EN 0x0001 /* Chip-Select Enable */
+#define CSD_SIZ_MASK 0x000e /* Chip-Select Size */
+#define CSD_SIZ_SHIFT 1
+#define CSD_WS_MASK 0x0070 /* Wait State */
+#define CSD_WS_SHIFT 4
+#define CSD_BSW 0x0080 /* Data Bus Width */
+#define CSD_FLASH 0x0100 /* FLASH Memory Support */
+#define CSD_DRAM 0x0200 /* Dram Selection */
+#define CSD_COMB 0x0400 /* Combining */
+#define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
+#define CSD_UPSIZ_SHIFT 11
+#define CSD_ROP 0x2000 /* Readonly if protected */
+#define CSD_SOP 0x4000 /* Supervisor only if protected */
+#define CSD_RO 0x8000 /* Read-Only */
+
+/*
+ * Emulation Chip-Select Register
+ */
+#define EMUCS_ADDR 0xfffff118
+#define EMUCS WORD_REF(EMUCS_ADDR)
+
+#define EMUCS_WS_MASK 0x0070
+#define EMUCS_WS_SHIFT 4
+
+/**********
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * PLL Control Register
+ */
+#define PLLCR_ADDR 0xfffff200
+#define PLLCR WORD_REF(PLLCR_ADDR)
+
+#define PLLCR_DISPLL 0x0008 /* Disable PLL */
+#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */
+#define PLLCR_PRESC 0x0020 /* VCO prescaler */
+#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */
+#define PLLCR_SYSCLK_SEL_SHIFT 8
+#define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */
+#define PLLCR_LCDCLK_SEL_SHIFT 11
+
+/* '328-compatible definitions */
+#define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK
+#define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT
+
+/*
+ * PLL Frequency Select Register
+ */
+#define PLLFSR_ADDR 0xfffff202
+#define PLLFSR WORD_REF(PLLFSR_ADDR)
+
+#define PLLFSR_PC_MASK 0x00ff /* P Count */
+#define PLLFSR_PC_SHIFT 0
+#define PLLFSR_QC_MASK 0x0f00 /* Q Count */
+#define PLLFSR_QC_SHIFT 8
+#define PLLFSR_PROT 0x4000 /* Protect P & Q */
+#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */
+
+/*
+ * Power Control Register
+ */
+#define PCTRL_ADDR 0xfffff207
+#define PCTRL BYTE_REF(PCTRL_ADDR)
+
+#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */
+#define PCTRL_WIDTH_SHIFT 0
+#define PCTRL_PCEN 0x80 /* Power Control Enable */
+
+/**********
+ *
+ * 0xFFFFF3xx -- Interrupt Controller
+ *
+ **********/
+
+/*
+ * Interrupt Vector Register
+ */
+#define IVR_ADDR 0xfffff300
+#define IVR BYTE_REF(IVR_ADDR)
+
+#define IVR_VECTOR_MASK 0xF8
+
+/*
+ * Interrupt control Register
+ */
+#define ICR_ADDR 0xfffff302
+#define ICR WORD_REF(ICR_ADDR)
+
+#define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */
+#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */
+#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */
+#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */
+#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */
+#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */
+#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */
+#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */
+#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMR_ADDR 0xfffff304
+#define IMR LONG_REF(IMR_ADDR)
+
+/*
+ * Define the names for bit positions first. This is useful for
+ * request_irq
+ */
+#define SPI2_IRQ_NUM 0 /* SPI 2 interrupt */
+#define TMR_IRQ_NUM 1 /* Timer 1 interrupt */
+#define UART1_IRQ_NUM 2 /* UART 1 interrupt */
+#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */
+#define RTC_IRQ_NUM 4 /* RTC interrupt */
+#define TMR2_IRQ_NUM 5 /* Timer 2 interrupt */
+#define KB_IRQ_NUM 6 /* Keyboard Interrupt */
+#define PWM1_IRQ_NUM 7 /* Pulse-Width Modulator 1 int. */
+#define INT0_IRQ_NUM 8 /* External INT0 */
+#define INT1_IRQ_NUM 9 /* External INT1 */
+#define INT2_IRQ_NUM 10 /* External INT2 */
+#define INT3_IRQ_NUM 11 /* External INT3 */
+#define UART2_IRQ_NUM 12 /* UART 2 interrupt */
+#define PWM2_IRQ_NUM 13 /* Pulse-Width Modulator 1 int. */
+#define IRQ1_IRQ_NUM 16 /* IRQ1 */
+#define IRQ2_IRQ_NUM 17 /* IRQ2 */
+#define IRQ3_IRQ_NUM 18 /* IRQ3 */
+#define IRQ6_IRQ_NUM 19 /* IRQ6 */
+#define IRQ5_IRQ_NUM 20 /* IRQ5 */
+#define SPI1_IRQ_NUM 21 /* SPI 1 interrupt */
+#define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */
+#define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */
+
+#define SPI_IRQ_NUM SPI2_IRQ_NUM
+
+/* '328-compatible definitions */
+#define SPIM_IRQ_NUM SPI_IRQ_NUM
+#define TMR1_IRQ_NUM TMR_IRQ_NUM
+#define UART_IRQ_NUM UART1_IRQ_NUM
+
+/*
+ * Here go the bitmasks themselves
+ */
+#define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */
+#define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */
+#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
+#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
+#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */
+#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */
+#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */
+#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */
+#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */
+#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */
+#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */
+#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */
+#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */
+#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */
+#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */
+#define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */
+#define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */
+#define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IMR_MSPIM IMR_MSPI
+#define IMR_MTMR1 IMR_MTMR
+
+/*
+ * Interrupt Status Register
+ */
+#define ISR_ADDR 0xfffff30c
+#define ISR LONG_REF(ISR_ADDR)
+
+#define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */
+#define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */
+#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
+#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
+#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
+#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
+#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */
+#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
+#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
+#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
+#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
+#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
+#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
+#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
+#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
+#define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */
+#define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */
+#define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define ISR_SPIM ISR_SPI
+#define ISR_TMR1 ISR_TMR
+
+/*
+ * Interrupt Pending Register
+ */
+#define IPR_ADDR 0xfffff30c
+#define IPR LONG_REF(IPR_ADDR)
+
+#define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */
+#define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */
+#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
+#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
+#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
+#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
+#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */
+#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
+#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
+#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
+#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
+#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
+#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
+#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
+#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
+#define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */
+#define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */
+#define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IPR_SPIM IPR_SPI
+#define IPR_TMR1 IPR_TMR
+
+/**********
+ *
+ * 0xFFFFF4xx -- Parallel Ports
+ *
+ **********/
+
+/*
+ * Port A
+ */
+#define PADIR_ADDR 0xfffff400 /* Port A direction reg */
+#define PADATA_ADDR 0xfffff401 /* Port A data register */
+#define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */
+
+#define PADIR BYTE_REF(PADIR_ADDR)
+#define PADATA BYTE_REF(PADATA_ADDR)
+#define PAPUEN BYTE_REF(PAPUEN_ADDR)
+
+#define PA(x) (1 << (x))
+
+/*
+ * Port B
+ */
+#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */
+#define PBDATA_ADDR 0xfffff409 /* Port B data register */
+#define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */
+#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */
+
+#define PBDIR BYTE_REF(PBDIR_ADDR)
+#define PBDATA BYTE_REF(PBDATA_ADDR)
+#define PBPUEN BYTE_REF(PBPUEN_ADDR)
+#define PBSEL BYTE_REF(PBSEL_ADDR)
+
+#define PB(x) (1 << (x))
+
+#define PB_CSB0 0x01 /* Use CSB0 as PB[0] */
+#define PB_CSB1 0x02 /* Use CSB1 as PB[1] */
+#define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */
+#define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */
+#define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */
+#define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */
+#define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */
+#define PB_PWMO 0x80 /* Use PWMO as PB[7] */
+
+/*
+ * Port C
+ */
+#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */
+#define PCDATA_ADDR 0xfffff411 /* Port C data register */
+#define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */
+#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */
+
+#define PCDIR BYTE_REF(PCDIR_ADDR)
+#define PCDATA BYTE_REF(PCDATA_ADDR)
+#define PCPDEN BYTE_REF(PCPDEN_ADDR)
+#define PCSEL BYTE_REF(PCSEL_ADDR)
+
+#define PC(x) (1 << (x))
+
+#define PC_LD0 0x01 /* Use LD0 as PC[0] */
+#define PC_LD1 0x02 /* Use LD1 as PC[1] */
+#define PC_LD2 0x04 /* Use LD2 as PC[2] */
+#define PC_LD3 0x08 /* Use LD3 as PC[3] */
+#define PC_LFLM 0x10 /* Use LFLM as PC[4] */
+#define PC_LLP 0x20 /* Use LLP as PC[5] */
+#define PC_LCLK 0x40 /* Use LCLK as PC[6] */
+#define PC_LACD 0x80 /* Use LACD as PC[7] */
+
+/*
+ * Port D
+ */
+#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */
+#define PDDATA_ADDR 0xfffff419 /* Port D data register */
+#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */
+#define PDSEL_ADDR 0xfffff41b /* Port D Select Register */
+#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */
+#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */
+#define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */
+#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */
+
+#define PDDIR BYTE_REF(PDDIR_ADDR)
+#define PDDATA BYTE_REF(PDDATA_ADDR)
+#define PDPUEN BYTE_REF(PDPUEN_ADDR)
+#define PDSEL BYTE_REF(PDSEL_ADDR)
+#define PDPOL BYTE_REF(PDPOL_ADDR)
+#define PDIRQEN BYTE_REF(PDIRQEN_ADDR)
+#define PDKBEN BYTE_REF(PDKBEN_ADDR)
+#define PDIQEG BYTE_REF(PDIQEG_ADDR)
+
+#define PD(x) (1 << (x))
+
+#define PD_INT0 0x01 /* Use INT0 as PD[0] */
+#define PD_INT1 0x02 /* Use INT1 as PD[1] */
+#define PD_INT2 0x04 /* Use INT2 as PD[2] */
+#define PD_INT3 0x08 /* Use INT3 as PD[3] */
+#define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */
+#define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */
+#define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */
+#define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */
+
+/*
+ * Port E
+ */
+#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */
+#define PEDATA_ADDR 0xfffff421 /* Port E data register */
+#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */
+#define PESEL_ADDR 0xfffff423 /* Port E Select Register */
+
+#define PEDIR BYTE_REF(PEDIR_ADDR)
+#define PEDATA BYTE_REF(PEDATA_ADDR)
+#define PEPUEN BYTE_REF(PEPUEN_ADDR)
+#define PESEL BYTE_REF(PESEL_ADDR)
+
+#define PE(x) (1 << (x))
+
+#define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */
+#define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */
+#define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */
+#define PE_DWE 0x08 /* Use DWE as PE[3] */
+#define PE_RXD 0x10 /* Use RXD as PE[4] */
+#define PE_TXD 0x20 /* Use TXD as PE[5] */
+#define PE_RTS 0x40 /* Use RTS as PE[6] */
+#define PE_CTS 0x80 /* Use CTS as PE[7] */
+
+/*
+ * Port F
+ */
+#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */
+#define PFDATA_ADDR 0xfffff429 /* Port F data register */
+#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */
+#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */
+
+#define PFDIR BYTE_REF(PFDIR_ADDR)
+#define PFDATA BYTE_REF(PFDATA_ADDR)
+#define PFPUEN BYTE_REF(PFPUEN_ADDR)
+#define PFSEL BYTE_REF(PFSEL_ADDR)
+
+#define PF(x) (1 << (x))
+
+#define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */
+#define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */
+#define PF_CLKO 0x04 /* Use CLKO as PF[2] */
+#define PF_A20 0x08 /* Use A20 as PF[3] */
+#define PF_A21 0x10 /* Use A21 as PF[4] */
+#define PF_A22 0x20 /* Use A22 as PF[5] */
+#define PF_A23 0x40 /* Use A23 as PF[6] */
+#define PF_CSA1 0x80 /* Use CSA1 as PF[7] */
+
+/*
+ * Port G
+ */
+#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */
+#define PGDATA_ADDR 0xfffff431 /* Port G data register */
+#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */
+#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */
+
+#define PGDIR BYTE_REF(PGDIR_ADDR)
+#define PGDATA BYTE_REF(PGDATA_ADDR)
+#define PGPUEN BYTE_REF(PGPUEN_ADDR)
+#define PGSEL BYTE_REF(PGSEL_ADDR)
+
+#define PG(x) (1 << (x))
+
+#define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */
+#define PG_A0 0x02 /* Use A0 as PG[1] */
+#define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */
+#define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */
+#define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */
+#define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */
+
+/*
+ * Port J
+ */
+#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */
+#define PJDATA_ADDR 0xfffff439 /* Port J data register */
+#define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enb. reg */
+#define PJSEL_ADDR 0xfffff43B /* Port J Select Register */
+
+#define PJDIR BYTE_REF(PJDIR_ADDR)
+#define PJDATA BYTE_REF(PJDATA_ADDR)
+#define PJPUEN BYTE_REF(PJPUEN_ADDR)
+#define PJSEL BYTE_REF(PJSEL_ADDR)
+
+#define PJ(x) (1 << (x))
+
+/*
+ * Port K
+ */
+#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */
+#define PKDATA_ADDR 0xfffff441 /* Port K data register */
+#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enb. reg */
+#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */
+
+#define PKDIR BYTE_REF(PKDIR_ADDR)
+#define PKDATA BYTE_REF(PKDATA_ADDR)
+#define PKPUEN BYTE_REF(PKPUEN_ADDR)
+#define PKSEL BYTE_REF(PKSEL_ADDR)
+
+#define PK(x) (1 << (x))
+
+#define PK_DATAREADY 0x01 /* Use ~DATA_READY as PK[0] */
+#define PK_PWM2 0x01 /* Use PWM2 as PK[0] */
+#define PK_R_W 0x02 /* Use R/W as PK[1] */
+#define PK_LDS 0x04 /* Use /LDS as PK[2] */
+#define PK_UDS 0x08 /* Use /UDS as PK[3] */
+#define PK_LD4 0x10 /* Use LD4 as PK[4] */
+#define PK_LD5 0x20 /* Use LD5 as PK[5] */
+#define PK_LD6 0x40 /* Use LD6 as PK[6] */
+#define PK_LD7 0x80 /* Use LD7 as PK[7] */
+
+#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */
+#define PJDATA_ADDR 0xfffff439 /* Port J data register */
+#define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enable reg */
+#define PJSEL_ADDR 0xfffff43B /* Port J Select Register */
+
+#define PJDIR BYTE_REF(PJDIR_ADDR)
+#define PJDATA BYTE_REF(PJDATA_ADDR)
+#define PJPUEN BYTE_REF(PJPUEN_ADDR)
+#define PJSEL BYTE_REF(PJSEL_ADDR)
+
+#define PJ(x) (1 << (x))
+
+#define PJ_MOSI 0x01 /* Use MOSI as PJ[0] */
+#define PJ_MISO 0x02 /* Use MISO as PJ[1] */
+#define PJ_SPICLK1 0x04 /* Use SPICLK1 as PJ[2] */
+#define PJ_SS 0x08 /* Use SS as PJ[3] */
+#define PJ_RXD2 0x10 /* Use RXD2 as PJ[4] */
+#define PJ_TXD2 0x20 /* Use TXD2 as PJ[5] */
+#define PJ_RTS2 0x40 /* Use RTS2 as PJ[5] */
+#define PJ_CTS2 0x80 /* Use CTS2 as PJ[5] */
+
+/*
+ * Port M
+ */
+#define PMDIR_ADDR 0xfffff448 /* Port M direction reg */
+#define PMDATA_ADDR 0xfffff449 /* Port M data register */
+#define PMPUEN_ADDR 0xfffff44a /* Port M Pull-Up enable reg */
+#define PMSEL_ADDR 0xfffff44b /* Port M Select Register */
+
+#define PMDIR BYTE_REF(PMDIR_ADDR)
+#define PMDATA BYTE_REF(PMDATA_ADDR)
+#define PMPUEN BYTE_REF(PMPUEN_ADDR)
+#define PMSEL BYTE_REF(PMSEL_ADDR)
+
+#define PM(x) (1 << (x))
+
+#define PM_SDCLK 0x01 /* Use SDCLK as PM[0] */
+#define PM_SDCE 0x02 /* Use SDCE as PM[1] */
+#define PM_DQMH 0x04 /* Use DQMH as PM[2] */
+#define PM_DQML 0x08 /* Use DQML as PM[3] */
+#define PM_SDA10 0x10 /* Use SDA10 as PM[4] */
+#define PM_DMOE 0x20 /* Use DMOE as PM[5] */
+
+/**********
+ *
+ * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
+ *
+ **********/
+
+/*
+ * PWM Control Register
+ */
+#define PWMC_ADDR 0xfffff500
+#define PWMC WORD_REF(PWMC_ADDR)
+
+#define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */
+#define PWMC_CLKSEL_SHIFT 0
+#define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */
+#define PWMC_REPEAT_SHIFT 2
+#define PWMC_EN 0x0010 /* Enable PWM */
+#define PMNC_FIFOAV 0x0020 /* FIFO Available */
+#define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */
+#define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */
+#define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */
+#define PWMC_PRESCALER_SHIFT 8
+#define PWMC_CLKSRC 0x8000 /* Clock Source Select */
+
+/* '328-compatible definitions */
+#define PWMC_PWMEN PWMC_EN
+
+/*
+ * PWM Sample Register
+ */
+#define PWMS_ADDR 0xfffff502
+#define PWMS WORD_REF(PWMS_ADDR)
+
+/*
+ * PWM Period Register
+ */
+#define PWMP_ADDR 0xfffff504
+#define PWMP BYTE_REF(PWMP_ADDR)
+
+/*
+ * PWM Counter Register
+ */
+#define PWMCNT_ADDR 0xfffff505
+#define PWMCNT BYTE_REF(PWMCNT_ADDR)
+
+/**********
+ *
+ * 0xFFFFF6xx -- General-Purpose Timer
+ *
+ **********/
+
+/*
+ * Timer Control register
+ */
+#define TCTL_ADDR 0xfffff600
+#define TCTL WORD_REF(TCTL_ADDR)
+
+#define TCTL_TEN 0x0001 /* Timer Enable */
+#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */
+#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */
+#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */
+#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */
+#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */
+#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */
+#define TCTL_IRQEN 0x0010 /* IRQ Enable */
+#define TCTL_OM 0x0020 /* Output Mode */
+#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */
+#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */
+#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */
+#define TCTL_FRR 0x0010 /* Free-Run Mode */
+
+/* '328-compatible definitions */
+#define TCTL1_ADDR TCTL_ADDR
+#define TCTL1 TCTL
+
+/*
+ * Timer Prescaler Register
+ */
+#define TPRER_ADDR 0xfffff602
+#define TPRER WORD_REF(TPRER_ADDR)
+
+/* '328-compatible definitions */
+#define TPRER1_ADDR TPRER_ADDR
+#define TPRER1 TPRER
+
+/*
+ * Timer Compare Register
+ */
+#define TCMP_ADDR 0xfffff604
+#define TCMP WORD_REF(TCMP_ADDR)
+
+/* '328-compatible definitions */
+#define TCMP1_ADDR TCMP_ADDR
+#define TCMP1 TCMP
+
+/*
+ * Timer Capture register
+ */
+#define TCR_ADDR 0xfffff606
+#define TCR WORD_REF(TCR_ADDR)
+
+/* '328-compatible definitions */
+#define TCR1_ADDR TCR_ADDR
+#define TCR1 TCR
+
+/*
+ * Timer Counter Register
+ */
+#define TCN_ADDR 0xfffff608
+#define TCN WORD_REF(TCN_ADDR)
+
+/* '328-compatible definitions */
+#define TCN1_ADDR TCN_ADDR
+#define TCN1 TCN
+
+/*
+ * Timer Status Register
+ */
+#define TSTAT_ADDR 0xfffff60a
+#define TSTAT WORD_REF(TSTAT_ADDR)
+
+#define TSTAT_COMP 0x0001 /* Compare Event occurred */
+#define TSTAT_CAPT 0x0001 /* Capture Event occurred */
+
+/* '328-compatible definitions */
+#define TSTAT1_ADDR TSTAT_ADDR
+#define TSTAT1 TSTAT
+
+/**********
+ *
+ * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ *
+ **********/
+
+/*
+ * SPIM Data Register
+ */
+#define SPIMDATA_ADDR 0xfffff800
+#define SPIMDATA WORD_REF(SPIMDATA_ADDR)
+
+/*
+ * SPIM Control/Status Register
+ */
+#define SPIMCONT_ADDR 0xfffff802
+#define SPIMCONT WORD_REF(SPIMCONT_ADDR)
+
+#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */
+#define SPIMCONT_BIT_COUNT_SHIFT 0
+#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */
+#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */
+#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */
+#define SPIMCONT_IRQ 0x0080 /* Interrupt Request */
+#define SPIMCONT_XCH 0x0100 /* Exchange */
+#define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */
+#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */
+#define SPIMCONT_DATA_RATE_SHIFT 13
+
+/* '328-compatible definitions */
+#define SPIMCONT_SPIMIRQ SPIMCONT_IRQ
+#define SPIMCONT_SPIMEN SPIMCONT_ENABLE
+
+/**********
+ *
+ * 0xFFFFF9xx -- UART
+ *
+ **********/
+
+/*
+ * UART Status/Control Register
+ */
+
+#define USTCNT_ADDR 0xfffff900
+#define USTCNT WORD_REF(USTCNT_ADDR)
+
+#define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */
+#define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */
+#define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */
+#define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */
+#define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */
+#define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */
+#define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */
+#define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */
+#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */
+#define USTCNT_STOP 0x0200 /* Stop bit transmission */
+#define USTCNT_ODD 0x0400 /* Odd Parity */
+#define USTCNT_PEN 0x0800 /* Parity Enable */
+#define USTCNT_CLKM 0x1000 /* Clock Mode Select */
+#define USTCNT_TXEN 0x2000 /* Transmitter Enable */
+#define USTCNT_RXEN 0x4000 /* Receiver Enable */
+#define USTCNT_UEN 0x8000 /* UART Enable */
+
+/* '328-compatible definitions */
+#define USTCNT_TXAVAILEN USTCNT_TXAE
+#define USTCNT_TXHALFEN USTCNT_TXHE
+#define USTCNT_TXEMPTYEN USTCNT_TXEE
+#define USTCNT_RXREADYEN USTCNT_RXRE
+#define USTCNT_RXHALFEN USTCNT_RXHE
+#define USTCNT_RXFULLEN USTCNT_RXFE
+#define USTCNT_CTSDELTAEN USTCNT_CTSD
+#define USTCNT_ODD_EVEN USTCNT_ODD
+#define USTCNT_PARITYEN USTCNT_PEN
+#define USTCNT_CLKMODE USTCNT_CLKM
+#define USTCNT_UARTEN USTCNT_UEN
+
+/*
+ * UART Baud Control Register
+ */
+#define UBAUD_ADDR 0xfffff902
+#define UBAUD WORD_REF(UBAUD_ADDR)
+
+#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
+#define UBAUD_PRESCALER_SHIFT 0
+#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_SHIFT 8
+#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
+#define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */
+
+/*
+ * UART Receiver Register
+ */
+#define URX_ADDR 0xfffff904
+#define URX WORD_REF(URX_ADDR)
+
+#define URX_RXDATA_ADDR 0xfffff905
+#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR)
+
+#define URX_RXDATA_MASK 0x00ff /* Received data */
+#define URX_RXDATA_SHIFT 0
+#define URX_PARITY_ERROR 0x0100 /* Parity Error */
+#define URX_BREAK 0x0200 /* Break Detected */
+#define URX_FRAME_ERROR 0x0400 /* Framing Error */
+#define URX_OVRUN 0x0800 /* Serial Overrun */
+#define URX_OLD_DATA 0x1000 /* Old data in FIFO */
+#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */
+#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */
+#define URX_FIFO_FULL 0x8000 /* FIFO is Full */
+
+/*
+ * UART Transmitter Register
+ */
+#define UTX_ADDR 0xfffff906
+#define UTX WORD_REF(UTX_ADDR)
+
+#define UTX_TXDATA_ADDR 0xfffff907
+#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR)
+
+#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */
+#define UTX_TXDATA_SHIFT 0
+#define UTX_CTS_DELTA 0x0100 /* CTS changed */
+#define UTX_CTS_STAT 0x0200 /* CTS State */
+#define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */
+#define UTX_NOCTS 0x0800 /* Ignore CTS */
+#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */
+#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */
+#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */
+#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */
+
+/* '328-compatible definitions */
+#define UTX_CTS_STATUS UTX_CTS_STAT
+#define UTX_IGNORE_CTS UTX_NOCTS
+
+/*
+ * UART Miscellaneous Register
+ */
+#define UMISC_ADDR 0xfffff908
+#define UMISC WORD_REF(UMISC_ADDR)
+
+#define UMISC_TX_POL 0x0004 /* Transmit Polarity */
+#define UMISC_RX_POL 0x0008 /* Receive Polarity */
+#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */
+#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */
+#define UMISC_RTS 0x0040 /* Set RTS status */
+#define UMISC_RTSCONT 0x0080 /* Choose RTS control */
+#define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */
+#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */
+#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */
+#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */
+#define UMISC_CLKSRC 0x4000 /* Clock Source */
+#define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */
+
+/*
+ * UART Non-integer Prescaler Register
+ */
+#define NIPR_ADDR 0xfffff90a
+#define NIPR WORD_REF(NIPR_ADDR)
+
+#define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */
+#define NIPR_STEP_VALUE_SHIFT 0
+#define NIPR_SELECT_MASK 0x0700 /* Tap Selection */
+#define NIPR_SELECT_SHIFT 8
+#define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */
+
+
+/* generalization of uart control registers to support multiple ports: */
+typedef struct {
+ volatile unsigned short int ustcnt;
+ volatile unsigned short int ubaud;
+ union {
+ volatile unsigned short int w;
+ struct {
+ volatile unsigned char status;
+ volatile unsigned char rxdata;
+ } b;
+ } urx;
+ union {
+ volatile unsigned short int w;
+ struct {
+ volatile unsigned char status;
+ volatile unsigned char txdata;
+ } b;
+ } utx;
+ volatile unsigned short int umisc;
+ volatile unsigned short int nipr;
+ volatile unsigned short int hmark;
+ volatile unsigned short int unused;
+} __attribute__((packed)) m68328_uart;
+
+
+
+
+/**********
+ *
+ * 0xFFFFFAxx -- LCD Controller
+ *
+ **********/
+
+/*
+ * LCD Screen Starting Address Register
+ */
+#define LSSA_ADDR 0xfffffa00
+#define LSSA LONG_REF(LSSA_ADDR)
+
+#define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */
+
+/*
+ * LCD Virtual Page Width Register
+ */
+#define LVPW_ADDR 0xfffffa05
+#define LVPW BYTE_REF(LVPW_ADDR)
+
+/*
+ * LCD Screen Width Register (not compatible with '328 !!!)
+ */
+#define LXMAX_ADDR 0xfffffa08
+#define LXMAX WORD_REF(LXMAX_ADDR)
+
+#define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */
+
+/*
+ * LCD Screen Height Register
+ */
+#define LYMAX_ADDR 0xfffffa0a
+#define LYMAX WORD_REF(LYMAX_ADDR)
+
+#define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */
+
+/*
+ * LCD Cursor X Position Register
+ */
+#define LCXP_ADDR 0xfffffa18
+#define LCXP WORD_REF(LCXP_ADDR)
+
+#define LCXP_CC_MASK 0xc000 /* Cursor Control */
+#define LCXP_CC_TRAMSPARENT 0x0000
+#define LCXP_CC_BLACK 0x4000
+#define LCXP_CC_REVERSED 0x8000
+#define LCXP_CC_WHITE 0xc000
+#define LCXP_CXP_MASK 0x02ff /* Cursor X position */
+
+/*
+ * LCD Cursor Y Position Register
+ */
+#define LCYP_ADDR 0xfffffa1a
+#define LCYP WORD_REF(LCYP_ADDR)
+
+#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */
+
+/*
+ * LCD Cursor Width and Heigth Register
+ */
+#define LCWCH_ADDR 0xfffffa1c
+#define LCWCH WORD_REF(LCWCH_ADDR)
+
+#define LCWCH_CH_MASK 0x001f /* Cursor Height */
+#define LCWCH_CH_SHIFT 0
+#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */
+#define LCWCH_CW_SHIFT 8
+
+/*
+ * LCD Blink Control Register
+ */
+#define LBLKC_ADDR 0xfffffa1f
+#define LBLKC BYTE_REF(LBLKC_ADDR)
+
+#define LBLKC_BD_MASK 0x7f /* Blink Divisor */
+#define LBLKC_BD_SHIFT 0
+#define LBLKC_BKEN 0x80 /* Blink Enabled */
+
+/*
+ * LCD Panel Interface Configuration Register
+ */
+#define LPICF_ADDR 0xfffffa20
+#define LPICF BYTE_REF(LPICF_ADDR)
+
+#define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */
+#define LPICF_GS_BW 0x00
+#define LPICF_GS_GRAY_4 0x01
+#define LPICF_GS_GRAY_16 0x02
+#define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */
+#define LPICF_PBSIZ_1 0x00
+#define LPICF_PBSIZ_2 0x04
+#define LPICF_PBSIZ_4 0x08
+
+/*
+ * LCD Polarity Configuration Register
+ */
+#define LPOLCF_ADDR 0xfffffa21
+#define LPOLCF BYTE_REF(LPOLCF_ADDR)
+
+#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */
+#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */
+#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */
+#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */
+
+/*
+ * LACD (LCD Alternate Crystal Direction) Rate Control Register
+ */
+#define LACDRC_ADDR 0xfffffa23
+#define LACDRC BYTE_REF(LACDRC_ADDR)
+
+#define LACDRC_ACDSLT 0x80 /* Signal Source Select */
+#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */
+#define LACDRC_ACD_SHIFT 0
+
+/*
+ * LCD Pixel Clock Divider Register
+ */
+#define LPXCD_ADDR 0xfffffa25
+#define LPXCD BYTE_REF(LPXCD_ADDR)
+
+#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */
+#define LPXCD_PCD_SHIFT 0
+
+/*
+ * LCD Clocking Control Register
+ */
+#define LCKCON_ADDR 0xfffffa27
+#define LCKCON BYTE_REF(LCKCON_ADDR)
+
+#define LCKCON_DWS_MASK 0x0f /* Display Wait-State */
+#define LCKCON_DWS_SHIFT 0
+#define LCKCON_DWIDTH 0x40 /* Display Memory Width */
+#define LCKCON_LCDON 0x80 /* Enable LCD Controller */
+
+/* '328-compatible definitions */
+#define LCKCON_DW_MASK LCKCON_DWS_MASK
+#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
+
+/*
+ * LCD Refresh Rate Adjustment Register
+ */
+#define LRRA_ADDR 0xfffffa29
+#define LRRA BYTE_REF(LRRA_ADDR)
+
+/*
+ * LCD Panning Offset Register
+ */
+#define LPOSR_ADDR 0xfffffa2d
+#define LPOSR BYTE_REF(LPOSR_ADDR)
+
+#define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */
+#define LPOSR_POS_SHIFT 0
+
+/*
+ * LCD Frame Rate Control Modulation Register
+ */
+#define LFRCM_ADDR 0xfffffa31
+#define LFRCM BYTE_REF(LFRCM_ADDR)
+
+#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */
+#define LFRCM_YMOD_SHIFT 0
+#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */
+#define LFRCM_XMOD_SHIFT 4
+
+/*
+ * LCD Gray Palette Mapping Register
+ */
+#define LGPMR_ADDR 0xfffffa33
+#define LGPMR BYTE_REF(LGPMR_ADDR)
+
+#define LGPMR_G1_MASK 0x0f
+#define LGPMR_G1_SHIFT 0
+#define LGPMR_G2_MASK 0xf0
+#define LGPMR_G2_SHIFT 4
+
+/*
+ * PWM Contrast Control Register
+ */
+#define PWMR_ADDR 0xfffffa36
+#define PWMR WORD_REF(PWMR_ADDR)
+
+#define PWMR_PW_MASK 0x00ff /* Pulse Width */
+#define PWMR_PW_SHIFT 0
+#define PWMR_CCPEN 0x0100 /* Contrast Control Enable */
+#define PWMR_SRC_MASK 0x0600 /* Input Clock Source */
+#define PWMR_SRC_LINE 0x0000 /* Line Pulse */
+#define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */
+#define PWMR_SRC_LCD 0x4000 /* LCD clock */
+
+/**********
+ *
+ * 0xFFFFFBxx -- Real-Time Clock (RTC)
+ *
+ **********/
+
+/*
+ * RTC Hours Minutes and Seconds Register
+ */
+#define RTCTIME_ADDR 0xfffffb00
+#define RTCTIME LONG_REF(RTCTIME_ADDR)
+
+#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */
+#define RTCTIME_SECONDS_SHIFT 0
+#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */
+#define RTCTIME_MINUTES_SHIFT 16
+#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */
+#define RTCTIME_HOURS_SHIFT 24
+
+/*
+ * RTC Alarm Register
+ */
+#define RTCALRM_ADDR 0xfffffb04
+#define RTCALRM LONG_REF(RTCALRM_ADDR)
+
+#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */
+#define RTCALRM_SECONDS_SHIFT 0
+#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */
+#define RTCALRM_MINUTES_SHIFT 16
+#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */
+#define RTCALRM_HOURS_SHIFT 24
+
+/*
+ * Watchdog Timer Register
+ */
+#define WATCHDOG_ADDR 0xfffffb0a
+#define WATCHDOG WORD_REF(WATCHDOG_ADDR)
+
+#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */
+#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */
+#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */
+#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */
+#define WATCHDOG_CNT_SHIFT 8
+
+/*
+ * RTC Control Register
+ */
+#define RTCCTL_ADDR 0xfffffb0c
+#define RTCCTL WORD_REF(RTCCTL_ADDR)
+
+#define RTCCTL_XTL 0x0020 /* Crystal Selection */
+#define RTCCTL_EN 0x0080 /* RTC Enable */
+
+/* '328-compatible definitions */
+#define RTCCTL_384 RTCCTL_XTL
+#define RTCCTL_ENABLE RTCCTL_EN
+
+/*
+ * RTC Interrupt Status Register
+ */
+#define RTCISR_ADDR 0xfffffb0e
+#define RTCISR WORD_REF(RTCISR_ADDR)
+
+#define RTCISR_SW 0x0001 /* Stopwatch timed out */
+#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */
+#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */
+#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */
+#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */
+#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */
+#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */
+#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */
+#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */
+#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */
+#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */
+#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */
+#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */
+
+/*
+ * RTC Interrupt Enable Register
+ */
+#define RTCIENR_ADDR 0xfffffb10
+#define RTCIENR WORD_REF(RTCIENR_ADDR)
+
+#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */
+#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */
+#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */
+#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */
+#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */
+#define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */
+#define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */
+#define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */
+#define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */
+#define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */
+#define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */
+#define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */
+#define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */
+#define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */
+
+/*
+ * Stopwatch Minutes Register
+ */
+#define STPWCH_ADDR 0xfffffb12
+#define STPWCH WORD_REF(STPWCH_ADDR)
+
+#define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */
+#define SPTWCH_CNT_SHIFT 0
+
+/*
+ * RTC Day Count Register
+ */
+#define DAYR_ADDR 0xfffffb1a
+#define DAYR WORD_REF(DAYR_ADDR)
+
+#define DAYR_DAYS_MASK 0x1ff /* Day Setting */
+#define DAYR_DAYS_SHIFT 0
+
+/*
+ * RTC Day Alarm Register
+ */
+#define DAYALARM_ADDR 0xfffffb1c
+#define DAYALARM WORD_REF(DAYALARM_ADDR)
+
+#define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */
+#define DAYALARM_DAYSAL_SHIFT 0
+
+/**********
+ *
+ * 0xFFFFFCxx -- DRAM Controller
+ *
+ **********/
+
+/*
+ * DRAM Memory Configuration Register
+ */
+#define DRAMMC_ADDR 0xfffffc00
+#define DRAMMC WORD_REF(DRAMMC_ADDR)
+
+#define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */
+#define DRAMMC_ROW12_PA10 0x0000
+#define DRAMMC_ROW12_PA21 0x4000
+#define DRAMMC_ROW12_PA23 0x8000
+#define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */
+#define DRAMMC_ROW0_PA11 0x0000
+#define DRAMMC_ROW0_PA22 0x1000
+#define DRAMMC_ROW0_PA23 0x2000
+#define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */
+#define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */
+#define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */
+#define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */
+#define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */
+#define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */
+#define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */
+#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */
+#define DRAMMC_REF_SHIFT 0
+
+/*
+ * DRAM Control Register
+ */
+#define DRAMC_ADDR 0xfffffc02
+#define DRAMC WORD_REF(DRAMC_ADDR)
+
+#define DRAMC_DWE 0x0001 /* DRAM Write Enable */
+#define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */
+#define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */
+#define DRAMC_SLW 0x0008 /* Slow RAM */
+#define DRAMC_LSP 0x0010 /* Light Sleep */
+#define DRAMC_MSW 0x0020 /* Slow Multiplexing */
+#define DRAMC_WS_MASK 0x00c0 /* Wait-states */
+#define DRAMC_WS_SHIFT 6
+#define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */
+#define DRAMC_PGSZ_SHIFT 8
+#define DRAMC_PGSZ_256K 0x0000
+#define DRAMC_PGSZ_512K 0x0100
+#define DRAMC_PGSZ_1024K 0x0200
+#define DRAMC_PGSZ_2048K 0x0300
+#define DRAMC_EDO 0x0400 /* EDO DRAM */
+#define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */
+#define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */
+#define DRAMC_BC_SHIFT 12
+#define DRAMC_RM 0x4000 /* Refresh Mode */
+#define DRAMC_EN 0x8000 /* DRAM Controller enable */
+
+
+/**********
+ *
+ * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
+ *
+ **********/
+
+/*
+ * ICE Module Address Compare Register
+ */
+#define ICEMACR_ADDR 0xfffffd00
+#define ICEMACR LONG_REF(ICEMACR_ADDR)
+
+/*
+ * ICE Module Address Mask Register
+ */
+#define ICEMAMR_ADDR 0xfffffd04
+#define ICEMAMR LONG_REF(ICEMAMR_ADDR)
+
+/*
+ * ICE Module Control Compare Register
+ */
+#define ICEMCCR_ADDR 0xfffffd08
+#define ICEMCCR WORD_REF(ICEMCCR_ADDR)
+
+#define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */
+#define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */
+
+/*
+ * ICE Module Control Mask Register
+ */
+#define ICEMCMR_ADDR 0xfffffd0a
+#define ICEMCMR WORD_REF(ICEMCMR_ADDR)
+
+#define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */
+#define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */
+
+/*
+ * ICE Module Control Register
+ */
+#define ICEMCR_ADDR 0xfffffd0c
+#define ICEMCR WORD_REF(ICEMCR_ADDR)
+
+#define ICEMCR_CEN 0x0001 /* Compare Enable */
+#define ICEMCR_PBEN 0x0002 /* Program Break Enable */
+#define ICEMCR_SB 0x0004 /* Single Breakpoint */
+#define ICEMCR_HMDIS 0x0008 /* HardMap disable */
+#define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */
+
+/*
+ * ICE Module Status Register
+ */
+#define ICEMSR_ADDR 0xfffffd0e
+#define ICEMSR WORD_REF(ICEMSR_ADDR)
+
+#define ICEMSR_EMUEN 0x0001 /* Emulation Enable */
+#define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */
+#define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */
+#define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */
+
+#endif /* _MC68VZ328_H_ */
--- /dev/null
+#include <asm-m68k/a.out.h>
--- /dev/null
+/****************************************************************************/
+
+/*
+ * anchor.h -- Anchor CO-MEM Lite PCI host bridge part.
+ *
+ * (C) Copyright 2000, Moreton Bay (www.moreton.com.au)
+ */
+
+/****************************************************************************/
+#ifndef anchor_h
+#define anchor_h
+/****************************************************************************/
+
+/*
+ * Define basic addressing info.
+ */
+#if defined(CONFIG_M5407C3)
+#define COMEM_BASE 0xFFFF0000 /* Base of CO-MEM address space */
+#define COMEM_IRQ 25 /* IRQ of anchor part */
+#else
+#define COMEM_BASE 0x80000000 /* Base of CO-MEM address space */
+#define COMEM_IRQ 25 /* IRQ of anchor part */
+#endif
+
+/****************************************************************************/
+
+/*
+ * 4-byte registers of CO-MEM, so adjust register addresses for
+ * easy access. Handy macro for word access too.
+ */
+#define LREG(a) ((a) >> 2)
+#define WREG(a) ((a) >> 1)
+
+
+/*
+ * Define base addresses within CO-MEM Lite register address space.
+ */
+#define COMEM_I2O 0x0000 /* I2O registers */
+#define COMEM_OPREGS 0x0400 /* Operation registers */
+#define COMEM_PCIBUS 0x2000 /* Direct access to PCI bus */
+#define COMEM_SHMEM 0x4000 /* Shared memory region */
+
+#define COMEM_SHMEMSIZE 0x4000 /* Size of shared memory */
+
+
+/*
+ * Define CO-MEM Registers.
+ */
+#define COMEM_I2OHISR 0x0030 /* I2O host interrupt status */
+#define COMEM_I2OHIMR 0x0034 /* I2O host interrupt mask */
+#define COMEM_I2OLISR 0x0038 /* I2O local interrupt status */
+#define COMEM_I2OLIMR 0x003c /* I2O local interrupt mask */
+#define COMEM_IBFPFIFO 0x0040 /* I2O inbound free/post FIFO */
+#define COMEM_OBPFFIFO 0x0044 /* I2O outbound post/free FIFO */
+#define COMEM_IBPFFIFO 0x0048 /* I2O inbound post/free FIFO */
+#define COMEM_OBFPFIFO 0x004c /* I2O outbound free/post FIFO */
+
+#define COMEM_DAHBASE 0x0460 /* Direct access base address */
+
+#define COMEM_NVCMD 0x04a0 /* I2C serial command */
+#define COMEM_NVREAD 0x04a4 /* I2C serial read */
+#define COMEM_NVSTAT 0x04a8 /* I2C status */
+
+#define COMEM_DMALBASE 0x04b0 /* DMA local base address */
+#define COMEM_DMAHBASE 0x04b4 /* DMA host base address */
+#define COMEM_DMASIZE 0x04b8 /* DMA size */
+#define COMEM_DMACTL 0x04bc /* DMA control */
+
+#define COMEM_HCTL 0x04e0 /* Host control */
+#define COMEM_HINT 0x04e4 /* Host interrupt control/status */
+#define COMEM_HLDATA 0x04e8 /* Host to local data mailbox */
+#define COMEM_LINT 0x04f4 /* Local interrupt contole status */
+#define COMEM_LHDATA 0x04f8 /* Local to host data mailbox */
+
+#define COMEM_LBUSCFG 0x04fc /* Local bus configuration */
+
+
+/*
+ * Commands and flags for use with Direct Access Register.
+ */
+#define COMEM_DA_IACK 0x00000000 /* Interrupt acknowledge (read) */
+#define COMEM_DA_SPCL 0x00000010 /* Special cycle (write) */
+#define COMEM_DA_MEMRD 0x00000004 /* Memory read cycle */
+#define COMEM_DA_MEMWR 0x00000004 /* Memory write cycle */
+#define COMEM_DA_IORD 0x00000002 /* I/O read cycle */
+#define COMEM_DA_IOWR 0x00000002 /* I/O write cycle */
+#define COMEM_DA_CFGRD 0x00000006 /* Configuration read cycle */
+#define COMEM_DA_CFGWR 0x00000006 /* Configuration write cycle */
+
+#define COMEM_DA_ADDR(a) ((a) & 0xffffe000)
+
+#define COMEM_DA_OFFSET(a) ((a) & 0x00001fff)
+
+
+/*
+ * The PCI bus will be limited in what slots will actually be used.
+ * Define valid device numbers for different boards.
+ */
+#if defined(CONFIG_M5407C3)
+#define COMEM_MINDEV 14 /* Minimum valid DEVICE */
+#define COMEM_MAXDEV 14 /* Maximum valid DEVICE */
+#define COMEM_BRIDGEDEV 15 /* Slot bridge is in */
+#else
+#define COMEM_MINDEV 0 /* Minimum valid DEVICE */
+#define COMEM_MAXDEV 3 /* Maximum valid DEVICE */
+#endif
+
+#define COMEM_MAXPCI (COMEM_MAXDEV+1) /* Maximum PCI devices */
+
+
+/****************************************************************************/
+#endif /* anchor_h */
--- /dev/null
+#ifndef __ARCH_M68KNOMMU_ATOMIC__
+#define __ARCH_M68KNOMMU_ATOMIC__
+
+#include <asm/system.h>
+
+/*
+ * Atomic operations that C can't guarantee us. Useful for
+ * resource counting etc..
+ */
+
+/*
+ * We do not have SMP m68k systems, so we don't have to deal with that.
+ */
+
+typedef struct { int counter; } atomic_t;
+#define ATOMIC_INIT(i) { (i) }
+
+#define atomic_read(v) ((v)->counter)
+#define atomic_set(v, i) (((v)->counter) = i)
+
+static __inline__ void atomic_add(int i, atomic_t *v)
+{
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "d" (i));
+#else
+ __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "di" (i));
+#endif
+}
+
+static __inline__ void atomic_sub(int i, atomic_t *v)
+{
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "d" (i));
+#else
+ __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "di" (i));
+#endif
+}
+
+static __inline__ int atomic_sub_and_test(int i, atomic_t * v)
+{
+ char c;
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__("subl %2,%1; seq %0"
+ : "=d" (c), "+m" (*v)
+ : "d" (i));
+#else
+ __asm__ __volatile__("subl %2,%1; seq %0"
+ : "=d" (c), "+m" (*v)
+ : "di" (i));
+#endif
+ return c != 0;
+}
+
+static __inline__ void atomic_inc(volatile atomic_t *v)
+{
+ __asm__ __volatile__("addql #1,%0" : "+m" (*v));
+}
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+
+static __inline__ int atomic_inc_and_test(volatile atomic_t *v)
+{
+ char c;
+ __asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+ return c != 0;
+}
+
+static __inline__ void atomic_dec(volatile atomic_t *v)
+{
+ __asm__ __volatile__("subql #1,%0" : "+m" (*v));
+}
+
+static __inline__ int atomic_dec_and_test(volatile atomic_t *v)
+{
+ char c;
+ __asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+ return c != 0;
+}
+
+static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v)
+{
+ __asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask)));
+}
+
+static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
+{
+ __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask));
+}
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec() barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc() barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+static inline int atomic_add_return(int i, atomic_t * v)
+{
+ unsigned long temp, flags;
+
+ local_irq_save(flags);
+ temp = *(long *)v;
+ temp += i;
+ *(long *)v = temp;
+ local_irq_restore(flags);
+
+ return temp;
+}
+
+#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
+
+static inline int atomic_sub_return(int i, atomic_t * v)
+{
+ unsigned long temp, flags;
+
+ local_irq_save(flags);
+ temp = *(long *)v;
+ temp -= i;
+ *(long *)v = temp;
+ local_irq_restore(flags);
+
+ return temp;
+}
+
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+ int c, old;
+ c = atomic_read(v);
+ for (;;) {
+ if (unlikely(c == (u)))
+ break;
+ old = atomic_cmpxchg((v), c, c + (a));
+ if (likely(old == c))
+ break;
+ c = old;
+ }
+ return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_dec_return(v) atomic_sub_return(1,(v))
+#define atomic_inc_return(v) atomic_add_return(1,(v))
+
+#include <asm-generic/atomic.h>
+#endif /* __ARCH_M68KNOMMU_ATOMIC __ */
--- /dev/null
+#ifndef __ASMm68k_AUXVEC_H
+#define __ASMm68k_AUXVEC_H
+
+#endif
--- /dev/null
+#ifndef _M68KNOMMU_BITOPS_H
+#define _M68KNOMMU_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h> /* swab32 */
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#if defined (__mcfisaaplus__) || defined (__mcfisac__)
+static inline int ffs(unsigned int val)
+{
+ if (!val)
+ return 0;
+
+ asm volatile(
+ "bitrev %0\n\t"
+ "ff1 %0\n\t"
+ : "=d" (val)
+ : "0" (val)
+ );
+ val++;
+ return val;
+}
+
+static inline int __ffs(unsigned int val)
+{
+ asm volatile(
+ "bitrev %0\n\t"
+ "ff1 %0\n\t"
+ : "=d" (val)
+ : "0" (val)
+ );
+ return val;
+}
+
+#else
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/__ffs.h>
+#endif
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffz.h>
+
+static __inline__ void set_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)"
+ : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "d" (nr)
+ : "%a0", "cc");
+#else
+ __asm__ __volatile__ ("bset %1,%0"
+ : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "di" (nr)
+ : "cc");
+#endif
+}
+
+#define __set_bit(nr, addr) set_bit(nr, addr)
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit() barrier()
+#define smp_mb__after_clear_bit() barrier()
+
+static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)"
+ : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "d" (nr)
+ : "%a0", "cc");
+#else
+ __asm__ __volatile__ ("bclr %1,%0"
+ : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "di" (nr)
+ : "cc");
+#endif
+}
+
+#define __clear_bit(nr, addr) clear_bit(nr, addr)
+
+static __inline__ void change_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)"
+ : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "d" (nr)
+ : "%a0", "cc");
+#else
+ __asm__ __volatile__ ("bchg %1,%0"
+ : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "di" (nr)
+ : "cc");
+#endif
+}
+
+#define __change_bit(nr, addr) change_bit(nr, addr)
+
+static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
+{
+ char retval;
+
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "d" (nr)
+ : "%a0");
+#else
+ __asm__ __volatile__ ("bset %2,%1; sne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "di" (nr)
+ /* No clobber */);
+#endif
+
+ return retval;
+}
+
+#define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr)
+
+static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
+{
+ char retval;
+
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "d" (nr)
+ : "%a0");
+#else
+ __asm__ __volatile__ ("bclr %2,%1; sne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "di" (nr)
+ /* No clobber */);
+#endif
+
+ return retval;
+}
+
+#define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr)
+
+static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
+{
+ char retval;
+
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "d" (nr)
+ : "%a0");
+#else
+ __asm__ __volatile__ ("bchg %2,%1; sne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+ : "di" (nr)
+ /* No clobber */);
+#endif
+
+ return retval;
+}
+
+#define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr)
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr)
+{
+ return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
+}
+
+static __inline__ int __test_bit(int nr, const volatile unsigned long * addr)
+{
+ int * a = (int *) addr;
+ int mask;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ return ((mask & *a) != 0);
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ __constant_test_bit((nr),(addr)) : \
+ __test_bit((nr),(addr)))
+
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+static __inline__ int ext2_set_bit(int nr, volatile void * addr)
+{
+ char retval;
+
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+ : "d" (nr)
+ : "%a0");
+#else
+ __asm__ __volatile__ ("bset %2,%1; sne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+ : "di" (nr)
+ /* No clobber */);
+#endif
+
+ return retval;
+}
+
+static __inline__ int ext2_clear_bit(int nr, volatile void * addr)
+{
+ char retval;
+
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+ : "d" (nr)
+ : "%a0");
+#else
+ __asm__ __volatile__ ("bclr %2,%1; sne %0"
+ : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+ : "di" (nr)
+ /* No clobber */);
+#endif
+
+ return retval;
+}
+
+#define ext2_set_bit_atomic(lock, nr, addr) \
+ ({ \
+ int ret; \
+ spin_lock(lock); \
+ ret = ext2_set_bit((nr), (addr)); \
+ spin_unlock(lock); \
+ ret; \
+ })
+
+#define ext2_clear_bit_atomic(lock, nr, addr) \
+ ({ \
+ int ret; \
+ spin_lock(lock); \
+ ret = ext2_clear_bit((nr), (addr)); \
+ spin_unlock(lock); \
+ ret; \
+ })
+
+static __inline__ int ext2_test_bit(int nr, const volatile void * addr)
+{
+ char retval;
+
+#ifdef CONFIG_COLDFIRE
+ __asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0"
+ : "=d" (retval)
+ : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr)
+ : "%a0");
+#else
+ __asm__ __volatile__ ("btst %2,%1; sne %0"
+ : "=d" (retval)
+ : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr)
+ /* No clobber */);
+#endif
+
+ return retval;
+}
+
+#define ext2_find_first_zero_bit(addr, size) \
+ ext2_find_next_zero_bit((addr), (size), 0)
+
+static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
+{
+ unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+ unsigned long result = offset & ~31UL;
+ unsigned long tmp;
+
+ if (offset >= size)
+ return size;
+ size -= result;
+ offset &= 31UL;
+ if(offset) {
+ /* We hold the little endian value in tmp, but then the
+ * shift is illegal. So we could keep a big endian value
+ * in tmp, like this:
+ *
+ * tmp = __swab32(*(p++));
+ * tmp |= ~0UL >> (32-offset);
+ *
+ * but this would decrease performance, so we change the
+ * shift:
+ */
+ tmp = *(p++);
+ tmp |= __swab32(~0UL >> (32-offset));
+ if(size < 32)
+ goto found_first;
+ if(~tmp)
+ goto found_middle;
+ size -= 32;
+ result += 32;
+ }
+ while(size & ~31UL) {
+ if(~(tmp = *(p++)))
+ goto found_middle;
+ result += 32;
+ size -= 32;
+ }
+ if(!size)
+ return result;
+ tmp = *p;
+
+found_first:
+ /* tmp is little endian, so we would have to swab the shift,
+ * see above. But then we have to swab tmp below for ffz, so
+ * we might as well do this here.
+ */
+ return result + ffz(__swab32(tmp) | (~0UL << size));
+found_middle:
+ return result + ffz(__swab32(tmp));
+}
+
+#define ext2_find_next_bit(addr, size, off) \
+ generic_find_next_le_bit((unsigned long *)(addr), (size), (off))
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#endif /* _M68KNOMMU_BITOPS_H */
--- /dev/null
+
+/* Nothing for m68knommu */
--- /dev/null
+/* bootstd.h: Bootloader system call interface
+ *
+ * (c) 1999, Rt-Control, Inc.
+ */
+
+#ifndef __BOOTSTD_H__
+#define __BOOTSTD_H__
+
+#define NR_BSC 21 /* last used bootloader system call */
+
+#define __BN_reset 0 /* reset and start the bootloader */
+#define __BN_test 1 /* tests the system call interface */
+#define __BN_exec 2 /* executes a bootloader image */
+#define __BN_exit 3 /* terminates a bootloader image */
+#define __BN_program 4 /* program FLASH from a chain */
+#define __BN_erase 5 /* erase sector(s) of FLASH */
+#define __BN_open 6
+#define __BN_write 7
+#define __BN_read 8
+#define __BN_close 9
+#define __BN_mmap 10 /* map a file descriptor into memory */
+#define __BN_munmap 11 /* remove a file to memory mapping */
+#define __BN_gethwaddr 12 /* get the hardware address of my interfaces */
+#define __BN_getserialnum 13 /* get the serial number of this board */
+#define __BN_getbenv 14 /* get a bootloader envvar */
+#define __BN_setbenv 15 /* get a bootloader envvar */
+#define __BN_setpmask 16 /* set the protection mask */
+#define __BN_readenv 17 /* read environment variables */
+#define __BN_flash_chattr_range 18
+#define __BN_flash_erase_range 19
+#define __BN_flash_write_range 20
+
+/* Calling conventions compatible to (uC)linux/68k
+ * We use simmilar macros to call into the bootloader as for uClinux
+ */
+
+#define __bsc_return(type, res) \
+do { \
+ if ((unsigned long)(res) >= (unsigned long)(-64)) { \
+ /* let errno be a function, preserve res in %d0 */ \
+ int __err = -(res); \
+ errno = __err; \
+ res = -1; \
+ } \
+ return (type)(res); \
+} while (0)
+
+#define _bsc0(type,name) \
+type name(void) \
+{ \
+ register long __res __asm__ ("%d0") = __BN_##name; \
+ __asm__ __volatile__ ("trap #2" \
+ : "=g" (__res) \
+ : "0" (__res) \
+ ); \
+ __bsc_return(type,__res); \
+}
+
+#define _bsc1(type,name,atype,a) \
+type name(atype a) \
+{ \
+ register long __res __asm__ ("%d0") = __BN_##name; \
+ register long __a __asm__ ("%d1") = (long)a; \
+ __asm__ __volatile__ ("trap #2" \
+ : "=g" (__res) \
+ : "0" (__res), "d" (__a) \
+ ); \
+ __bsc_return(type,__res); \
+}
+
+#define _bsc2(type,name,atype,a,btype,b) \
+type name(atype a, btype b) \
+{ \
+ register long __res __asm__ ("%d0") = __BN_##name; \
+ register long __a __asm__ ("%d1") = (long)a; \
+ register long __b __asm__ ("%d2") = (long)b; \
+ __asm__ __volatile__ ("trap #2" \
+ : "=g" (__res) \
+ : "0" (__res), "d" (__a), "d" (__b) \
+ ); \
+ __bsc_return(type,__res); \
+}
+
+#define _bsc3(type,name,atype,a,btype,b,ctype,c) \
+type name(atype a, btype b, ctype c) \
+{ \
+ register long __res __asm__ ("%d0") = __BN_##name; \
+ register long __a __asm__ ("%d1") = (long)a; \
+ register long __b __asm__ ("%d2") = (long)b; \
+ register long __c __asm__ ("%d3") = (long)c; \
+ __asm__ __volatile__ ("trap #2" \
+ : "=g" (__res) \
+ : "0" (__res), "d" (__a), "d" (__b), \
+ "d" (__c) \
+ ); \
+ __bsc_return(type,__res); \
+}
+
+#define _bsc4(type,name,atype,a,btype,b,ctype,c,dtype,d) \
+type name(atype a, btype b, ctype c, dtype d) \
+{ \
+ register long __res __asm__ ("%d0") = __BN_##name; \
+ register long __a __asm__ ("%d1") = (long)a; \
+ register long __b __asm__ ("%d2") = (long)b; \
+ register long __c __asm__ ("%d3") = (long)c; \
+ register long __d __asm__ ("%d4") = (long)d; \
+ __asm__ __volatile__ ("trap #2" \
+ : "=g" (__res) \
+ : "0" (__res), "d" (__a), "d" (__b), \
+ "d" (__c), "d" (__d) \
+ ); \
+ __bsc_return(type,__res); \
+}
+
+#define _bsc5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \
+type name(atype a, btype b, ctype c, dtype d, etype e) \
+{ \
+ register long __res __asm__ ("%d0") = __BN_##name; \
+ register long __a __asm__ ("%d1") = (long)a; \
+ register long __b __asm__ ("%d2") = (long)b; \
+ register long __c __asm__ ("%d3") = (long)c; \
+ register long __d __asm__ ("%d4") = (long)d; \
+ register long __e __asm__ ("%d5") = (long)e; \
+ __asm__ __volatile__ ("trap #2" \
+ : "=g" (__res) \
+ : "0" (__res), "d" (__a), "d" (__b), \
+ "d" (__c), "d" (__d), "d" (__e) \
+ ); \
+ __bsc_return(type,__res); \
+}
+
+#endif /* __BOOTSTD_H__ */
--- /dev/null
+#ifndef _M68KNOMMU_BUG_H
+#define _M68KNOMMU_BUG_H
+#include <asm-generic/bug.h>
+#endif
--- /dev/null
+/*
+ * include/asm-m68k/bugs.h
+ *
+ * Copyright (C) 1994 Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ * void check_bugs(void);
+ */
+
+static void check_bugs(void)
+{
+}
--- /dev/null
+#ifndef _M68KNOMMU_BYTEORDER_H
+#define _M68KNOMMU_BYTEORDER_H
+
+#include <linux/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __BYTEORDER_HAS_U64__
+# define __SWAB_64_THRU_32__
+#endif
+
+#if defined (__mcfisaaplus__) || defined (__mcfisac__)
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 val)
+{
+ asm(
+ "byterev %0"
+ : "=d" (val)
+ : "0" (val)
+ );
+ return val;
+}
+
+#define __arch__swab32(x) ___arch__swab32(x)
+#endif
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _M68KNOMMU_BYTEORDER_H */
--- /dev/null
+#ifndef __ARCH_M68KNOMMU_CACHE_H
+#define __ARCH_M68KNOMMU_CACHE_H
+
+/* bytes per L1 cache line */
+#define L1_CACHE_BYTES 16 /* this need to be at least 1 */
+
+/* m68k-elf-gcc 2.95.2 doesn't like these */
+
+#define __cacheline_aligned
+#define ____cacheline_aligned
+
+#endif
--- /dev/null
+#include <asm-m68k/cachectl.h>
--- /dev/null
+#ifndef _M68KNOMMU_CACHEFLUSH_H
+#define _M68KNOMMU_CACHEFLUSH_H
+
+/*
+ * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com>
+ */
+#include <linux/mm.h>
+
+#define flush_cache_all() __flush_cache_all()
+#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
+#define flush_cache_range(vma, start, end) __flush_cache_all()
+#define flush_cache_page(vma, vmaddr) do { } while (0)
+#define flush_dcache_range(start,len) __flush_cache_all()
+#define flush_dcache_page(page) do { } while (0)
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+#define flush_icache_range(start,len) __flush_cache_all()
+#define flush_icache_page(vma,pg) do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
+#define flush_cache_vmap(start, end) do { } while (0)
+#define flush_cache_vunmap(start, end) do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+
+static inline void __flush_cache_all(void)
+{
+#ifdef CONFIG_M5407
+ /*
+ * Use cpushl to push and invalidate all cache lines.
+ * Gas doesn't seem to know how to generate the ColdFire
+ * cpushl instruction... Oh well, bit stuff it for now.
+ */
+ __asm__ __volatile__ (
+ "nop\n\t"
+ "clrl %%d0\n\t"
+ "1:\n\t"
+ "movel %%d0,%%a0\n\t"
+ "2:\n\t"
+ ".word 0xf468\n\t"
+ "addl #0x10,%%a0\n\t"
+ "cmpl #0x00000800,%%a0\n\t"
+ "blt 2b\n\t"
+ "addql #1,%%d0\n\t"
+ "cmpil #4,%%d0\n\t"
+ "bne 1b\n\t"
+ "movel #0xb6088500,%%d0\n\t"
+ "movec %%d0,%%CACR\n\t"
+ : : : "d0", "a0" );
+#endif /* CONFIG_M5407 */
+#if defined(CONFIG_M527x) || defined(CONFIG_M528x)
+ __asm__ __volatile__ (
+ "movel #0x81000200, %%d0\n\t"
+ "movec %%d0, %%CACR\n\t"
+ "nop\n\t"
+ : : : "d0" );
+#endif /* CONFIG_M527x || CONFIG_M528x */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
+ __asm__ __volatile__ (
+ "movel #0x81000100, %%d0\n\t"
+ "movec %%d0, %%CACR\n\t"
+ "nop\n\t"
+ : : : "d0" );
+#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
+#ifdef CONFIG_M5249
+ __asm__ __volatile__ (
+ "movel #0xa1000200, %%d0\n\t"
+ "movec %%d0, %%CACR\n\t"
+ "nop\n\t"
+ : : : "d0" );
+#endif /* CONFIG_M5249 */
+#ifdef CONFIG_M532x
+ __asm__ __volatile__ (
+ "movel #0x81000200, %%d0\n\t"
+ "movec %%d0, %%CACR\n\t"
+ "nop\n\t"
+ : : : "d0" );
+#endif /* CONFIG_M532x */
+}
+
+#endif /* _M68KNOMMU_CACHEFLUSH_H */
--- /dev/null
+#ifndef _M68K_CHECKSUM_H
+#define _M68K_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+ int len, __wsum sum);
+
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern __wsum csum_partial_copy_from_user(const void __user *src,
+ void *dst, int len, __wsum sum, int *csum_err);
+
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/*
+ * Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+ unsigned int tmp = (__force u32)sum;
+#ifdef CONFIG_COLDFIRE
+ tmp = (tmp & 0xffff) + (tmp >> 16);
+ tmp = (tmp & 0xffff) + (tmp >> 16);
+ return (__force __sum16)~tmp;
+#else
+ __asm__("swap %1\n\t"
+ "addw %1, %0\n\t"
+ "clrw %1\n\t"
+ "addxw %1, %0"
+ : "=&d" (sum), "=&d" (tmp)
+ : "0" (sum), "1" (sum));
+ return (__force __sum16)~sum;
+#endif
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ __asm__ ("addl %1,%0\n\t"
+ "addxl %4,%0\n\t"
+ "addxl %5,%0\n\t"
+ "clrl %1\n\t"
+ "addxl %1,%0"
+ : "=&d" (sum), "=&d" (saddr)
+ : "0" (daddr), "1" (saddr), "d" (len + proto),
+ "d"(sum));
+ return sum;
+}
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+ __u32 len, unsigned short proto, __wsum sum)
+{
+ register unsigned long tmp;
+ __asm__("addl %2@,%0\n\t"
+ "movel %2@(4),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %2@(8),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %2@(12),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %3@,%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %3@(4),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %3@(8),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %3@(12),%1\n\t"
+ "addxl %1,%0\n\t"
+ "addxl %4,%0\n\t"
+ "clrl %1\n\t"
+ "addxl %1,%0"
+ : "=&d" (sum), "=&d" (tmp)
+ : "a" (saddr), "a" (daddr), "d" (len + proto),
+ "0" (sum));
+
+ return csum_fold(sum);
+}
+
+#endif /* _M68K_CHECKSUM_H */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * coldfire.h -- Motorola ColdFire CPU sepecific defines
+ *
+ * (C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef coldfire_h
+#define coldfire_h
+/****************************************************************************/
+
+
+/*
+ * Define master clock frequency. This is essentially done at config
+ * time now. No point enumerating dozens of possible clock options
+ * here. Also the peripheral clock (bus clock) divide ratio is set
+ * at config time too.
+ */
+#ifdef CONFIG_CLOCK_SET
+#define MCF_CLK CONFIG_CLOCK_FREQ
+#define MCF_BUSCLK (CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV)
+#else
+#error "Don't know what your ColdFire CPU clock frequency is??"
+#endif
+
+/*
+ * Define the processor support peripherals base address.
+ * This is generally setup by the boards start up code.
+ */
+#define MCF_MBAR 0x10000000
+#define MCF_MBAR2 0x80000000
+#if defined(CONFIG_M520x)
+#define MCF_IPSBAR 0xFC000000
+#else
+#define MCF_IPSBAR 0x40000000
+#endif
+
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+ defined(CONFIG_M520x)
+#undef MCF_MBAR
+#define MCF_MBAR MCF_IPSBAR
+#elif defined(CONFIG_M532x)
+#undef MCF_MBAR
+#define MCF_MBAR 0x00000000
+#endif
+
+/****************************************************************************/
+#endif /* coldfire_h */
--- /dev/null
+
+/*
+ * 68360 Communication Processor Module.
+ * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> (mc68360) after:
+ * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> (mpc8xx)
+ *
+ * This file contains structures and information for the communication
+ * processor channels. Some CPM control and status is available
+ * through the 68360 internal memory map. See include/asm/360_immap.h for details.
+ * This file is not a complete map of all of the 360 QUICC's capabilities
+ *
+ * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
+ * bytes of the DP RAM and relocates the I2C parameter area to the
+ * IDMA1 space. The remaining DP RAM is available for buffer descriptors
+ * or other use.
+ */
+#ifndef __CPM_360__
+#define __CPM_360__
+
+
+/* CPM Command register masks: */
+#define CPM_CR_RST ((ushort)0x8000)
+#define CPM_CR_OPCODE ((ushort)0x0f00)
+#define CPM_CR_CHAN ((ushort)0x00f0)
+#define CPM_CR_FLG ((ushort)0x0001)
+
+/* CPM Command set (opcodes): */
+#define CPM_CR_INIT_TRX ((ushort)0x0000)
+#define CPM_CR_INIT_RX ((ushort)0x0001)
+#define CPM_CR_INIT_TX ((ushort)0x0002)
+#define CPM_CR_HUNT_MODE ((ushort)0x0003)
+#define CPM_CR_STOP_TX ((ushort)0x0004)
+#define CPM_CR_GRSTOP_TX ((ushort)0x0005)
+#define CPM_CR_RESTART_TX ((ushort)0x0006)
+#define CPM_CR_CLOSE_RXBD ((ushort)0x0007)
+#define CPM_CR_SET_GADDR ((ushort)0x0008)
+#define CPM_CR_GCI_TIMEOUT ((ushort)0x0009)
+#define CPM_CR_GCI_ABORT ((ushort)0x000a)
+#define CPM_CR_RESET_BCS ((ushort)0x000a)
+
+/* CPM Channel numbers. */
+#define CPM_CR_CH_SCC1 ((ushort)0x0000)
+#define CPM_CR_CH_SCC2 ((ushort)0x0004)
+#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / Timers */
+#define CPM_CR_CH_TMR ((ushort)0x0005)
+#define CPM_CR_CH_SCC3 ((ushort)0x0008)
+#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / IDMA1 */
+#define CPM_CR_CH_IDMA1 ((ushort)0x0009)
+#define CPM_CR_CH_SCC4 ((ushort)0x000c)
+#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / IDMA2 */
+#define CPM_CR_CH_IDMA2 ((ushort)0x000d)
+
+
+#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
+
+#if 1 /* mleslie: I dinna think we have any such restrictions on
+ * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */
+
+/* The dual ported RAM is multi-functional. Some areas can be (and are
+ * being) used for microcode. There is an area that can only be used
+ * as data ram for buffer descriptors, which is all we use right now.
+ * Currently the first 512 and last 256 bytes are used for microcode.
+ */
+/* mleslie: The uCquicc board is using no extra microcode in DPRAM */
+#define CPM_DATAONLY_BASE ((uint)0x0000)
+#define CPM_DATAONLY_SIZE ((uint)0x0800)
+#define CPM_DP_NOSPACE ((uint)0x7fffffff)
+
+#endif
+
+
+/* Export the base address of the communication processor registers
+ * and dual port ram. */
+/* extern cpm360_t *cpmp; */ /* Pointer to comm processor */
+extern QUICC *pquicc;
+uint m360_cpm_dpalloc(uint size);
+/* void *m360_cpm_hostalloc(uint size); */
+void m360_cpm_setbrg(uint brg, uint rate);
+
+#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h */
+/* Buffer descriptors used by many of the CPM protocols. */
+typedef struct cpm_buf_desc {
+ ushort cbd_sc; /* Status and Control */
+ ushort cbd_datlen; /* Data length in buffer */
+ uint cbd_bufaddr; /* Buffer address in host memory */
+} cbd_t;
+#endif
+
+
+/* rx bd status/control bits */
+#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */
+#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor in table */
+#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
+#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame OR control char */
+
+#define BD_SC_FIRST ((ushort)0x0400) /* 1st buffer in an HDLC frame */
+#define BD_SC_ADDR ((ushort)0x0400) /* 1st byte is a multidrop address */
+
+#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
+#define BD_SC_ID ((ushort)0x0100) /* Received too many idles */
+
+#define BD_SC_AM ((ushort)0x0080) /* Multidrop address match */
+#define BD_SC_DE ((ushort)0x0080) /* DPLL Error (HDLC) */
+
+#define BD_SC_BR ((ushort)0x0020) /* Break received */
+#define BD_SC_LG ((ushort)0x0020) /* Frame length violation (HDLC) */
+
+#define BD_SC_FR ((ushort)0x0010) /* Framing error */
+#define BD_SC_NO ((ushort)0x0010) /* Nonoctet aligned frame (HDLC) */
+
+#define BD_SC_PR ((ushort)0x0008) /* Parity error */
+#define BD_SC_AB ((ushort)0x0008) /* Received abort Sequence (HDLC) */
+
+#define BD_SC_OV ((ushort)0x0002) /* Overrun */
+#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */
+
+/* tx bd status/control bits (as differ from rx bd) */
+#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
+#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */
+#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
+#define BD_SC_UN ((ushort)0x0002) /* Underrun */
+
+
+
+
+/* Parameter RAM offsets. */
+
+
+
+/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM.
+ * In 2.0, we use a more structured C struct map of DPRAM, and so
+ * instead, we need only a parameter ram `slot' */
+
+#define PRSLOT_SCC1 0
+#define PRSLOT_SCC2 1
+#define PRSLOT_SCC3 2
+#define PRSLOT_SMC1 2
+#define PRSLOT_SCC4 3
+#define PRSLOT_SMC2 3
+
+
+/* #define PROFF_SCC1 ((uint)0x0000) */
+/* #define PROFF_SCC2 ((uint)0x0100) */
+/* #define PROFF_SCC3 ((uint)0x0200) */
+/* #define PROFF_SMC1 ((uint)0x0280) */
+/* #define PROFF_SCC4 ((uint)0x0300) */
+/* #define PROFF_SMC2 ((uint)0x0380) */
+
+
+/* Define enough so I can at least use the serial port as a UART.
+ * The MBX uses SMC1 as the host serial port.
+ */
+typedef struct smc_uart {
+ ushort smc_rbase; /* Rx Buffer descriptor base address */
+ ushort smc_tbase; /* Tx Buffer descriptor base address */
+ u_char smc_rfcr; /* Rx function code */
+ u_char smc_tfcr; /* Tx function code */
+ ushort smc_mrblr; /* Max receive buffer length */
+ uint smc_rstate; /* Internal */
+ uint smc_idp; /* Internal */
+ ushort smc_rbptr; /* Internal */
+ ushort smc_ibc; /* Internal */
+ uint smc_rxtmp; /* Internal */
+ uint smc_tstate; /* Internal */
+ uint smc_tdp; /* Internal */
+ ushort smc_tbptr; /* Internal */
+ ushort smc_tbc; /* Internal */
+ uint smc_txtmp; /* Internal */
+ ushort smc_maxidl; /* Maximum idle characters */
+ ushort smc_tmpidl; /* Temporary idle counter */
+ ushort smc_brklen; /* Last received break length */
+ ushort smc_brkec; /* rcv'd break condition counter */
+ ushort smc_brkcr; /* xmt break count register */
+ ushort smc_rmask; /* Temporary bit mask */
+} smc_uart_t;
+
+/* Function code bits.
+*/
+#define SMC_EB ((u_char)0x10) /* Set big endian byte order */
+
+/* SMC uart mode register.
+*/
+#define SMCMR_REN ((ushort)0x0001)
+#define SMCMR_TEN ((ushort)0x0002)
+#define SMCMR_DM ((ushort)0x000c)
+#define SMCMR_SM_GCI ((ushort)0x0000)
+#define SMCMR_SM_UART ((ushort)0x0020)
+#define SMCMR_SM_TRANS ((ushort)0x0030)
+#define SMCMR_SM_MASK ((ushort)0x0030)
+#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
+#define SMCMR_REVD SMCMR_PM_EVEN
+#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
+#define SMCMR_BS SMCMR_PEN
+#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
+#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
+#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC2 as Centronics parallel printer. It is half duplex, in that
+ * it can only receive or transmit. The parameter ram values for
+ * each direction are either unique or properly overlap, so we can
+ * include them in one structure.
+ */
+typedef struct smc_centronics {
+ ushort scent_rbase;
+ ushort scent_tbase;
+ u_char scent_cfcr;
+ u_char scent_smask;
+ ushort scent_mrblr;
+ uint scent_rstate;
+ uint scent_r_ptr;
+ ushort scent_rbptr;
+ ushort scent_r_cnt;
+ uint scent_rtemp;
+ uint scent_tstate;
+ uint scent_t_ptr;
+ ushort scent_tbptr;
+ ushort scent_t_cnt;
+ uint scent_ttemp;
+ ushort scent_max_sl;
+ ushort scent_sl_cnt;
+ ushort scent_character1;
+ ushort scent_character2;
+ ushort scent_character3;
+ ushort scent_character4;
+ ushort scent_character5;
+ ushort scent_character6;
+ ushort scent_character7;
+ ushort scent_character8;
+ ushort scent_rccm;
+ ushort scent_rccr;
+} smc_cent_t;
+
+/* Centronics Status Mask Register.
+*/
+#define SMC_CENT_F ((u_char)0x08)
+#define SMC_CENT_PE ((u_char)0x04)
+#define SMC_CENT_S ((u_char)0x02)
+
+/* SMC Event and Mask register.
+*/
+#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
+#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
+#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */
+#define SMCM_BSY ((unsigned char)0x04)
+#define SMCM_TX ((unsigned char)0x02)
+#define SMCM_RX ((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST ((uint)0x00020000)
+#define CPM_BRG_EN ((uint)0x00010000)
+#define CPM_BRG_EXTC_INT ((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000)
+#define CPM_BRG_ATB ((uint)0x00002000)
+#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
+#define CPM_BRG_DIV16 ((uint)0x00000001)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP ((uint)0x00040000)
+#define SCC_GSMRH_GDE ((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
+#define SCC_GSMRH_REVD ((uint)0x00002000)
+#define SCC_GSMRH_TRX ((uint)0x00001000)
+#define SCC_GSMRH_TTX ((uint)0x00000800)
+#define SCC_GSMRH_CDP ((uint)0x00000400)
+#define SCC_GSMRH_CTSP ((uint)0x00000200)
+#define SCC_GSMRH_CDS ((uint)0x00000100)
+#define SCC_GSMRH_CTSS ((uint)0x00000080)
+#define SCC_GSMRH_TFL ((uint)0x00000040)
+#define SCC_GSMRH_RFW ((uint)0x00000020)
+#define SCC_GSMRH_TXSY ((uint)0x00000010)
+#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
+#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
+#define SCC_GSMRH_RTSM ((uint)0x00000002)
+#define SCC_GSMRH_RSYN ((uint)0x00000001)
+
+#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
+#define SCC_GSMRL_TCI ((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
+#define SCC_GSMRL_RINV ((uint)0x02000000)
+#define SCC_GSMRL_TINV ((uint)0x01000000)
+#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
+#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
+#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
+#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
+#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
+#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
+#define SCC_GSMRL_TEND ((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
+#define SCC_GSMRL_ENR ((uint)0x00000020)
+#define SCC_GSMRL_ENT ((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
+#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
+
+#define SCC_TODR_TOD ((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define SCCM_TXE ((unsigned char)0x10)
+#define SCCM_BSY ((unsigned char)0x04)
+#define SCCM_TX ((unsigned char)0x02)
+#define SCCM_RX ((unsigned char)0x01)
+
+typedef struct scc_param {
+ ushort scc_rbase; /* Rx Buffer descriptor base address */
+ ushort scc_tbase; /* Tx Buffer descriptor base address */
+ u_char scc_rfcr; /* Rx function code */
+ u_char scc_tfcr; /* Tx function code */
+ ushort scc_mrblr; /* Max receive buffer length */
+ uint scc_rstate; /* Internal */
+ uint scc_idp; /* Internal */
+ ushort scc_rbptr; /* Internal */
+ ushort scc_ibc; /* Internal */
+ uint scc_rxtmp; /* Internal */
+ uint scc_tstate; /* Internal */
+ uint scc_tdp; /* Internal */
+ ushort scc_tbptr; /* Internal */
+ ushort scc_tbc; /* Internal */
+ uint scc_txtmp; /* Internal */
+ uint scc_rcrc; /* Internal */
+ uint scc_tcrc; /* Internal */
+} sccp_t;
+
+
+/* Function code bits.
+ */
+#define SCC_EB ((u_char)0x10) /* Set big endian byte order */
+#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */
+
+/* CPM Ethernet through SCC1.
+ */
+typedef struct scc_enet {
+ sccp_t sen_genscc;
+ uint sen_cpres; /* Preset CRC */
+ uint sen_cmask; /* Constant mask for CRC */
+ uint sen_crcec; /* CRC Error counter */
+ uint sen_alec; /* alignment error counter */
+ uint sen_disfc; /* discard frame counter */
+ ushort sen_pads; /* Tx short frame pad character */
+ ushort sen_retlim; /* Retry limit threshold */
+ ushort sen_retcnt; /* Retry limit counter */
+ ushort sen_maxflr; /* maximum frame length register */
+ ushort sen_minflr; /* minimum frame length register */
+ ushort sen_maxd1; /* maximum DMA1 length */
+ ushort sen_maxd2; /* maximum DMA2 length */
+ ushort sen_maxd; /* Rx max DMA */
+ ushort sen_dmacnt; /* Rx DMA counter */
+ ushort sen_maxb; /* Max BD byte count */
+ ushort sen_gaddr1; /* Group address filter */
+ ushort sen_gaddr2;
+ ushort sen_gaddr3;
+ ushort sen_gaddr4;
+ uint sen_tbuf0data0; /* Save area 0 - current frame */
+ uint sen_tbuf0data1; /* Save area 1 - current frame */
+ uint sen_tbuf0rba; /* Internal */
+ uint sen_tbuf0crc; /* Internal */
+ ushort sen_tbuf0bcnt; /* Internal */
+ ushort sen_paddrh; /* physical address (MSB) */
+ ushort sen_paddrm;
+ ushort sen_paddrl; /* physical address (LSB) */
+ ushort sen_pper; /* persistence */
+ ushort sen_rfbdptr; /* Rx first BD pointer */
+ ushort sen_tfbdptr; /* Tx first BD pointer */
+ ushort sen_tlbdptr; /* Tx last BD pointer */
+ uint sen_tbuf1data0; /* Save area 0 - current frame */
+ uint sen_tbuf1data1; /* Save area 1 - current frame */
+ uint sen_tbuf1rba; /* Internal */
+ uint sen_tbuf1crc; /* Internal */
+ ushort sen_tbuf1bcnt; /* Internal */
+ ushort sen_txlen; /* Tx Frame length counter */
+ ushort sen_iaddr1; /* Individual address filter */
+ ushort sen_iaddr2;
+ ushort sen_iaddr3;
+ ushort sen_iaddr4;
+ ushort sen_boffcnt; /* Backoff counter */
+
+ /* NOTE: Some versions of the manual have the following items
+ * incorrectly documented. Below is the proper order.
+ */
+ ushort sen_taddrh; /* temp address (MSB) */
+ ushort sen_taddrm;
+ ushort sen_taddrl; /* temp address (LSB) */
+} scc_enet_t;
+
+
+
+#if defined (CONFIG_UCQUICC)
+/* uCquicc has the following signals connected to Ethernet:
+ * 68360 - lxt905
+ * PA0/RXD1 - rxd
+ * PA1/TXD1 - txd
+ * PA8/CLK1 - tclk
+ * PA9/CLK2 - rclk
+ * PC0/!RTS1 - t_en
+ * PC1/!CTS1 - col
+ * PC5/!CD1 - cd
+ */
+#define PA_ENET_RXD PA_RXD1
+#define PA_ENET_TXD PA_TXD1
+#define PA_ENET_TCLK PA_CLK1
+#define PA_ENET_RCLK PA_CLK2
+#define PC_ENET_TENA PC_RTS1
+#define PC_ENET_CLSN PC_CTS1
+#define PC_ENET_RENA PC_CD1
+
+/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
+ * SCC1.
+ */
+#define SICR_ENET_MASK ((uint)0x000000ff)
+#define SICR_ENET_CLKRT ((uint)0x0000002c)
+
+#endif /* config_ucquicc */
+
+
+#ifdef MBX
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use. The TCLK and RCLK seem unique
+ * to the MBX860 board. Any two of the four available clocks could be
+ * used, and the MPC860 cookbook manual has an example using different
+ * clock pins.
+ */
+#define PA_ENET_RXD ((ushort)0x0001)
+#define PA_ENET_TXD ((ushort)0x0002)
+#define PA_ENET_TCLK ((ushort)0x0200)
+#define PA_ENET_RCLK ((ushort)0x0800)
+#define PC_ENET_TENA ((ushort)0x0001)
+#define PC_ENET_CLSN ((ushort)0x0010)
+#define PC_ENET_RENA ((ushort)0x0020)
+
+/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
+ * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+#define SICR_ENET_MASK ((uint)0x000000ff)
+#define SICR_ENET_CLKRT ((uint)0x0000003d)
+#endif
+
+#ifdef CONFIG_RPXLITE
+/* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of
+ * this may be unique to the RPX-Lite configuration.
+ * Note TENA is on Port B.
+ */
+#define PA_ENET_RXD ((ushort)0x0004)
+#define PA_ENET_TXD ((ushort)0x0008)
+#define PA_ENET_TCLK ((ushort)0x0200)
+#define PA_ENET_RCLK ((ushort)0x0800)
+#define PB_ENET_TENA ((uint)0x00002000)
+#define PC_ENET_CLSN ((ushort)0x0040)
+#define PC_ENET_RENA ((ushort)0x0080)
+
+#define SICR_ENET_MASK ((uint)0x0000ff00)
+#define SICR_ENET_CLKRT ((uint)0x00003d00)
+#endif
+
+#ifdef CONFIG_BSEIP
+/* This ENET stuff is for the MPC823 with ethernet on SCC2.
+ * This is unique to the BSE ip-Engine board.
+ */
+#define PA_ENET_RXD ((ushort)0x0004)
+#define PA_ENET_TXD ((ushort)0x0008)
+#define PA_ENET_TCLK ((ushort)0x0100)
+#define PA_ENET_RCLK ((ushort)0x0200)
+#define PB_ENET_TENA ((uint)0x00002000)
+#define PC_ENET_CLSN ((ushort)0x0040)
+#define PC_ENET_RENA ((ushort)0x0080)
+
+/* BSE uses port B and C bits for PHY control also.
+*/
+#define PB_BSE_POWERUP ((uint)0x00000004)
+#define PB_BSE_FDXDIS ((uint)0x00008000)
+#define PC_BSE_LOOPBACK ((ushort)0x0800)
+
+#define SICR_ENET_MASK ((uint)0x0000ff00)
+#define SICR_ENET_CLKRT ((uint)0x00002c00)
+#endif
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
+#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
+#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
+#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
+#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
+#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
+
+/* SCC Mode Register (PMSR) as used by Ethernet.
+*/
+#define SCC_PMSR_HBC ((ushort)0x8000) /* Enable heartbeat */
+#define SCC_PMSR_FC ((ushort)0x4000) /* Force collision */
+#define SCC_PMSR_RSH ((ushort)0x2000) /* Receive short frames */
+#define SCC_PMSR_IAM ((ushort)0x1000) /* Check individual hash */
+#define SCC_PMSR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
+#define SCC_PMSR_PRO ((ushort)0x0200) /* Promiscuous mode */
+#define SCC_PMSR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
+#define SCC_PMSR_SBT ((ushort)0x0080) /* Special backoff timer */
+#define SCC_PMSR_LPB ((ushort)0x0040) /* Set Loopback mode */
+#define SCC_PMSR_SIP ((ushort)0x0020) /* Sample Input Pins */
+#define SCC_PMSR_LCW ((ushort)0x0010) /* Late collision window */
+#define SCC_PMSR_NIB22 ((ushort)0x000a) /* Start frame search */
+#define SCC_PMSR_FDE ((ushort)0x0001) /* Full duplex enable */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+*/
+#define BD_ENET_RX_EMPTY ((ushort)0x8000)
+#define BD_ENET_RX_WRAP ((ushort)0x2000)
+#define BD_ENET_RX_INTR ((ushort)0x1000)
+#define BD_ENET_RX_LAST ((ushort)0x0800)
+#define BD_ENET_RX_FIRST ((ushort)0x0400)
+#define BD_ENET_RX_MISS ((ushort)0x0100)
+#define BD_ENET_RX_LG ((ushort)0x0020)
+#define BD_ENET_RX_NO ((ushort)0x0010)
+#define BD_ENET_RX_SH ((ushort)0x0008)
+#define BD_ENET_RX_CR ((ushort)0x0004)
+#define BD_ENET_RX_OV ((ushort)0x0002)
+#define BD_ENET_RX_CL ((ushort)0x0001)
+#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+*/
+#define BD_ENET_TX_READY ((ushort)0x8000)
+#define BD_ENET_TX_PAD ((ushort)0x4000)
+#define BD_ENET_TX_WRAP ((ushort)0x2000)
+#define BD_ENET_TX_INTR ((ushort)0x1000)
+#define BD_ENET_TX_LAST ((ushort)0x0800)
+#define BD_ENET_TX_TC ((ushort)0x0400)
+#define BD_ENET_TX_DEF ((ushort)0x0200)
+#define BD_ENET_TX_HB ((ushort)0x0100)
+#define BD_ENET_TX_LC ((ushort)0x0080)
+#define BD_ENET_TX_RL ((ushort)0x0040)
+#define BD_ENET_TX_RCMASK ((ushort)0x003c)
+#define BD_ENET_TX_UN ((ushort)0x0002)
+#define BD_ENET_TX_CSL ((ushort)0x0001)
+#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+ sccp_t scc_genscc;
+ uint scc_res1; /* Reserved */
+ uint scc_res2; /* Reserved */
+ ushort scc_maxidl; /* Maximum idle chars */
+ ushort scc_idlc; /* temp idle counter */
+ ushort scc_brkcr; /* Break count register */
+ ushort scc_parec; /* receive parity error counter */
+ ushort scc_frmec; /* receive framing error counter */
+ ushort scc_nosec; /* receive noise counter */
+ ushort scc_brkec; /* receive break condition counter */
+ ushort scc_brkln; /* last received break length */
+ ushort scc_uaddr1; /* UART address character 1 */
+ ushort scc_uaddr2; /* UART address character 2 */
+ ushort scc_rtemp; /* Temp storage */
+ ushort scc_toseq; /* Transmit out of sequence char */
+ ushort scc_char1; /* control character 1 */
+ ushort scc_char2; /* control character 2 */
+ ushort scc_char3; /* control character 3 */
+ ushort scc_char4; /* control character 4 */
+ ushort scc_char5; /* control character 5 */
+ ushort scc_char6; /* control character 6 */
+ ushort scc_char7; /* control character 7 */
+ ushort scc_char8; /* control character 8 */
+ ushort scc_rccm; /* receive control character mask */
+ ushort scc_rccr; /* receive control character register */
+ ushort scc_rlbc; /* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR ((ushort)0x1000)
+#define UART_SCCM_GLT ((ushort)0x0800)
+#define UART_SCCM_AB ((ushort)0x0200)
+#define UART_SCCM_IDL ((ushort)0x0100)
+#define UART_SCCM_GRA ((ushort)0x0080)
+#define UART_SCCM_BRKE ((ushort)0x0040)
+#define UART_SCCM_BRKS ((ushort)0x0020)
+#define UART_SCCM_CCR ((ushort)0x0008)
+#define UART_SCCM_BSY ((ushort)0x0004)
+#define UART_SCCM_TX ((ushort)0x0002)
+#define UART_SCCM_RX ((ushort)0x0001)
+
+/* The SCC PMSR when used as a UART.
+*/
+#define SCU_PMSR_FLC ((ushort)0x8000)
+#define SCU_PMSR_SL ((ushort)0x4000)
+#define SCU_PMSR_CL ((ushort)0x3000)
+#define SCU_PMSR_UM ((ushort)0x0c00)
+#define SCU_PMSR_FRZ ((ushort)0x0200)
+#define SCU_PMSR_RZS ((ushort)0x0100)
+#define SCU_PMSR_SYN ((ushort)0x0080)
+#define SCU_PMSR_DRT ((ushort)0x0040)
+#define SCU_PMSR_PEN ((ushort)0x0010)
+#define SCU_PMSR_RPM ((ushort)0x000c)
+#define SCU_PMSR_REVP ((ushort)0x0008)
+#define SCU_PMSR_TPM ((ushort)0x0003)
+#define SCU_PMSR_TEVP ((ushort)0x0003)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+ sccp_t st_genscc;
+ uint st_cpres; /* Preset CRC */
+ uint st_cmask; /* Constant mask for CRC */
+} scc_trans_t;
+
+#define BD_SCC_TX_LAST ((ushort)0x0800)
+
+
+
+/* CPM interrupts. There are nearly 32 interrupts generated by CPM
+ * channels or devices. All of these are presented to the PPC core
+ * as a single interrupt. The CPM interrupt handler dispatches its
+ * own handlers, in a similar fashion to the PPC core handler. We
+ * use the table as defined in the manuals (i.e. no special high
+ * priority and SCC1 == SCCa, etc...).
+ */
+/* #define CPMVEC_NR 32 */
+/* #define CPMVEC_PIO_PC15 ((ushort)0x1f) */
+/* #define CPMVEC_SCC1 ((ushort)0x1e) */
+/* #define CPMVEC_SCC2 ((ushort)0x1d) */
+/* #define CPMVEC_SCC3 ((ushort)0x1c) */
+/* #define CPMVEC_SCC4 ((ushort)0x1b) */
+/* #define CPMVEC_PIO_PC14 ((ushort)0x1a) */
+/* #define CPMVEC_TIMER1 ((ushort)0x19) */
+/* #define CPMVEC_PIO_PC13 ((ushort)0x18) */
+/* #define CPMVEC_PIO_PC12 ((ushort)0x17) */
+/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */
+/* #define CPMVEC_IDMA1 ((ushort)0x15) */
+/* #define CPMVEC_IDMA2 ((ushort)0x14) */
+/* #define CPMVEC_TIMER2 ((ushort)0x12) */
+/* #define CPMVEC_RISCTIMER ((ushort)0x11) */
+/* #define CPMVEC_I2C ((ushort)0x10) */
+/* #define CPMVEC_PIO_PC11 ((ushort)0x0f) */
+/* #define CPMVEC_PIO_PC10 ((ushort)0x0e) */
+/* #define CPMVEC_TIMER3 ((ushort)0x0c) */
+/* #define CPMVEC_PIO_PC9 ((ushort)0x0b) */
+/* #define CPMVEC_PIO_PC8 ((ushort)0x0a) */
+/* #define CPMVEC_PIO_PC7 ((ushort)0x09) */
+/* #define CPMVEC_TIMER4 ((ushort)0x07) */
+/* #define CPMVEC_PIO_PC6 ((ushort)0x06) */
+/* #define CPMVEC_SPI ((ushort)0x05) */
+/* #define CPMVEC_SMC1 ((ushort)0x04) */
+/* #define CPMVEC_SMC2 ((ushort)0x03) */
+/* #define CPMVEC_PIO_PC5 ((ushort)0x02) */
+/* #define CPMVEC_PIO_PC4 ((ushort)0x01) */
+/* #define CPMVEC_ERROR ((ushort)0x00) */
+
+extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
+
+/* CPM interrupt configuration vector.
+*/
+#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
+#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
+#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
+#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
+#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
+#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
+#define CICR_IEN ((uint)0x00000080) /* Int. enable */
+#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
+#endif /* __CPM_360__ */
--- /dev/null
+#ifndef __M68KNOMMU_CPUTIME_H
+#define __M68KNOMMU_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __M68KNOMMU_CPUTIME_H */
--- /dev/null
+#ifndef _M68KNOMMU_CURRENT_H
+#define _M68KNOMMU_CURRENT_H
+/*
+ * current.h
+ * (C) Copyright 2000, Lineo, David McCullough <davidm@uclinux.org>
+ * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ *
+ * rather than dedicate a register (as the m68k source does), we
+ * just keep a global, we should probably just change it all to be
+ * current and lose _current_task.
+ */
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct *get_current(void)
+{
+ return(current_thread_info()->task);
+}
+
+#define current get_current()
+
+#endif /* _M68KNOMMU_CURRENT_H */
--- /dev/null
+#define DEBUG 1
+#ifdef CONFIG_COLDFIRE
+#define BREAK asm volatile ("halt")
+#else
+#define BREAK *(volatile unsigned char *)0xdeadbee0 = 0
+#endif
--- /dev/null
+#ifndef _M68KNOMMU_DELAY_H
+#define _M68KNOMMU_DELAY_H
+
+/*
+ * Copyright (C) 1994 Hamish Macdonald
+ * Copyright (C) 2004 Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <asm/param.h>
+
+static inline void __delay(unsigned long loops)
+{
+#if defined(CONFIG_COLDFIRE)
+ /* The coldfire runs this loop at significantly different speeds
+ * depending upon long word alignment or not. We'll pad it to
+ * long word alignment which is the faster version.
+ * The 0x4a8e is of course a 'tstl %fp' instruction. This is better
+ * than using a NOP (0x4e71) instruction because it executes in one
+ * cycle not three and doesn't allow for an arbitary delay waiting
+ * for bus cycles to finish. Also fp/a6 isn't likely to cause a
+ * stall waiting for the register to become valid if such is added
+ * to the coldfire at some stage.
+ */
+ __asm__ __volatile__ ( ".balignw 4, 0x4a8e\n\t"
+ "1: subql #1, %0\n\t"
+ "jcc 1b"
+ : "=d" (loops) : "0" (loops));
+#else
+ __asm__ __volatile__ ( "1: subql #1, %0\n\t"
+ "jcc 1b"
+ : "=d" (loops) : "0" (loops));
+#endif
+}
+
+/*
+ * Ideally we use a 32*32->64 multiply to calculate the number of
+ * loop iterations, but the older standard 68k and ColdFire do not
+ * have this instruction. So for them we have a clsoe approximation
+ * loop using 32*32->32 multiplies only. This calculation based on
+ * the ARM version of delay.
+ *
+ * We want to implement:
+ *
+ * loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32
+ */
+
+#define HZSCALE (268435456 / (1000000/HZ))
+
+extern unsigned long loops_per_jiffy;
+
+static inline void _udelay(unsigned long usecs)
+{
+#if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \
+ defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \
+ defined(CONFIG_COLDFIRE)
+ __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
+#else
+ unsigned long tmp;
+
+ usecs *= 4295; /* 2**32 / 1000000 */
+ __asm__ ("mulul %2,%0:%1"
+ : "=d" (usecs), "=d" (tmp)
+ : "d" (usecs), "1" (loops_per_jiffy*HZ));
+ __delay(usecs);
+#endif
+}
+
+/*
+ * Moved the udelay() function into library code, no longer inlined.
+ * I had to change the algorithm because we are overflowing now on
+ * the faster ColdFire parts. The code is a little bigger, so it makes
+ * sense to library it.
+ */
+extern void udelay(unsigned long usecs);
+
+#endif /* defined(_M68KNOMMU_DELAY_H) */
--- /dev/null
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
--- /dev/null
+#include <asm-generic/div64.h>
--- /dev/null
+#ifndef _M68KNOMMU_DMA_MAPPING_H
+#define _M68KNOMMU_DMA_MAPPING_H
+
+#ifdef CONFIG_PCI
+#include <asm-generic/dma-mapping.h>
+#else
+#include <asm-generic/dma-mapping-broken.h>
+#endif
+
+#endif /* _M68KNOMMU_DMA_MAPPING_H */
--- /dev/null
+#ifndef _M68K_DMA_H
+#define _M68K_DMA_H 1
+
+//#define DMA_DEBUG 1
+
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * ColdFire DMA Model:
+ * ColdFire DMA supports two forms of DMA: Single and Dual address. Single
+ * address mode emits a source address, and expects that the device will either
+ * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
+ * the device will place data on the correct byte(s) of the data bus, as the
+ * memory transactions are always 32 bits. This implies that only 32 bit
+ * devices will find single mode transfers useful. Dual address DMA mode
+ * performs two cycles: source read and destination write. ColdFire will
+ * align the data so that the device will always get the correct bytes, thus
+ * is useful for 8 and 16 bit devices. This is the mode that is supported
+ * below.
+ *
+ * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000
+ * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
+ * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * APR/18/2002 : added proper support for MCF5272 DMA controller.
+ * Arthur Shipkowski (art@videon-central.com)
+ */
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfdma.h>
+
+/*
+ * Set number of channels of DMA on ColdFire for different implementations.
+ */
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
+ defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define MAX_M68K_DMA_CHANNELS 4
+#elif defined(CONFIG_M5272)
+#define MAX_M68K_DMA_CHANNELS 1
+#elif defined(CONFIG_M532x)
+#define MAX_M68K_DMA_CHANNELS 0
+#else
+#define MAX_M68K_DMA_CHANNELS 2
+#endif
+
+extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
+extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+
+#if !defined(CONFIG_M5272)
+#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */
+#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */
+#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */
+#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ 0
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE 1
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD 2
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD 3
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG 4
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG 5
+/* I/O to memory, 8 bits, single-address-mode */
+#define DMA_MODE_READ_SINGLE 8
+/* memory to I/O, 8 bits, single-address-mode */
+#define DMA_MODE_WRITE_SINGLE 9
+/* I/O to memory, 16 bits, single-address-mode */
+#define DMA_MODE_READ_WORD_SINGLE 10
+/* memory to I/O, 16 bits, single-address-mode */
+#define DMA_MODE_WRITE_WORD_SINGLE 11
+/* I/O to memory, 32 bits, single-address-mode */
+#define DMA_MODE_READ_LONG_SINGLE 12
+/* memory to I/O, 32 bits, single-address-mode */
+#define DMA_MODE_WRITE_LONG_SINGLE 13
+
+#else /* CONFIG_M5272 is defined */
+
+/* Source static-address mode */
+#define DMA_MODE_SRC_SA_BIT 0x01
+/* Two bits to select between all four modes */
+#define DMA_MODE_SSIZE_MASK 0x06
+/* Offset to shift bits in */
+#define DMA_MODE_SSIZE_OFF 0x01
+/* Destination static-address mode */
+#define DMA_MODE_DES_SA_BIT 0x10
+/* Two bits to select between all four modes */
+#define DMA_MODE_DSIZE_MASK 0x60
+/* Offset to shift bits in */
+#define DMA_MODE_DSIZE_OFF 0x05
+/* Size modifiers */
+#define DMA_MODE_SIZE_LONG 0x00
+#define DMA_MODE_SIZE_BYTE 0x01
+#define DMA_MODE_SIZE_WORD 0x02
+#define DMA_MODE_SIZE_LINE 0x03
+
+/*
+ * Aliases to help speed quick ports; these may be suboptimal, however. They
+ * do not include the SINGLE mode modifiers since the MCF5272 does not have a
+ * mode where the device is in control of its addressing.
+ */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+
+#endif /* !defined(CONFIG_M5272) */
+
+#if !defined(CONFIG_M5272)
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+ volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+ printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+ dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+ volatile unsigned short *dmawp;
+ volatile unsigned char *dmapb;
+
+#ifdef DMA_DEBUG
+ printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+ dmapb = (unsigned char *) dma_base_addr[dmanr];
+
+ /* Turn off external requests, and stop any DMA in progress */
+ dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
+ dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+ volatile unsigned char *dmabp;
+ volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+ printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+
+ dmabp = (unsigned char *) dma_base_addr[dmanr];
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+ // Clear config errors
+ dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE;
+
+ // Set command register
+ dmawp[MCFDMA_DCR] =
+ MCFDMA_DCR_INT | // Enable completion irq
+ MCFDMA_DCR_CS | // Force one xfer per request
+ MCFDMA_DCR_AA | // Enable auto alignment
+ // single-address-mode
+ ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
+ // sets s_rw (-> r/w) high if Memory to I/0
+ ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
+ // Memory to I/O or I/O to Memory
+ ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
+ // 32 bit, 16 bit or 8 bit transfers
+ ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD :
+ ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
+ MCFDMA_DCR_SSIZE_BYTE)) |
+ ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD :
+ ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
+ MCFDMA_DCR_DSIZE_BYTE));
+
+#ifdef DEBUG_DMA
+ printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
+ dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
+ (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+ volatile unsigned short *dmawp;
+ volatile unsigned int *dmalp;
+
+#ifdef DMA_DEBUG
+ printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+ // Determine which address registers are used for memory/device accesses
+ if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
+ // Source incrementing, must be memory
+ dmalp[MCFDMA_SAR] = a;
+ // Set dest address, must be device
+ dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
+ } else {
+ // Destination incrementing, must be memory
+ dmalp[MCFDMA_DAR] = a;
+ // Set source address, must be device
+ dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
+ }
+
+#ifdef DEBUG_DMA
+ printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+ __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
+ (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
+ (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+ printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+ dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+ volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+ printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+ dmawp[MCFDMA_BCR] = (unsigned short)count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+ volatile unsigned short *dmawp;
+ unsigned short count;
+
+#ifdef DMA_DEBUG
+ printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+ count = dmawp[MCFDMA_BCR];
+ return((int) count);
+}
+#else /* CONFIG_M5272 is defined */
+
+/*
+ * The MCF5272 DMA controller is very different than the controller defined above
+ * in terms of register mapping. For instance, with the exception of the 16-bit
+ * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
+ *
+ * The big difference, however, is the lack of device-requested DMA. All modes
+ * are dual address transfer, and there is no 'device' setup or direction bit.
+ * You can DMA between a device and memory, between memory and memory, or even between
+ * two devices directly, with any combination of incrementing and non-incrementing
+ * addresses you choose. This puts a crimp in distinguishing between the 'device
+ * address' set up by set_dma_device_addr.
+ *
+ * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr,
+ * which will act exactly as above in -- it will look to see if the source is set to
+ * autoincrement, and if so it will make the source use the set_dma_addr value and the
+ * destination the set_dma_device_addr value. Otherwise the source will be set to the
+ * set_dma_device_addr value and the destination will get the set_dma_addr value.
+ *
+ * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
+ * and make it explicit. Depending on what you're doing, one of these two should work
+ * for you, but don't mix them in the same transfer setup.
+ */
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+ volatile unsigned int *dmalp;
+
+#ifdef DMA_DEBUG
+ printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+ dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+ volatile unsigned int *dmalp;
+
+#ifdef DMA_DEBUG
+ printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+ /* Turn off external requests, and stop any DMA in progress */
+ dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
+ dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+ volatile unsigned int *dmalp;
+ volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+ printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+ // Clear config errors
+ dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
+
+ // Set command register
+ dmalp[MCFDMA_DMR] =
+ MCFDMA_DMR_RQM_DUAL | // Mandatory Request Mode setting
+ MCFDMA_DMR_DSTT_SD | // Set up addressing types; set to supervisor-data.
+ MCFDMA_DMR_SRCT_SD | // Set up addressing types; set to supervisor-data.
+ // source static-address-mode
+ ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
+ // dest static-address-mode
+ ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
+ // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272
+ (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
+ (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
+
+ dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */
+
+#ifdef DEBUG_DMA
+ printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
+ dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
+ (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+ volatile unsigned int *dmalp;
+
+#ifdef DMA_DEBUG
+ printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+ // Determine which address registers are used for memory/device accesses
+ if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
+ // Source incrementing, must be memory
+ dmalp[MCFDMA_DSAR] = a;
+ // Set dest address, must be device
+ dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
+ } else {
+ // Destination incrementing, must be memory
+ dmalp[MCFDMA_DDAR] = a;
+ // Set source address, must be device
+ dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
+ }
+
+#ifdef DEBUG_DMA
+ printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+ __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
+ (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
+ (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+ printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+ dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ *
+ * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+ volatile unsigned int *dmalp;
+
+#ifdef DMA_DEBUG
+ printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+ dmalp[MCFDMA_DBCR] = count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+ volatile unsigned int *dmalp;
+ unsigned int count;
+
+#ifdef DMA_DEBUG
+ printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+ count = dmalp[MCFDMA_DBCR];
+ return(count);
+}
+
+#endif /* !defined(CONFIG_M5272) */
+#endif /* CONFIG_COLDFIRE */
+
+#define MAX_DMA_CHANNELS 8
+
+/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any
+ occurrence should be flagged as an error. */
+/* under 2.4 it is actually needed by the new bootmem allocator */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id); /* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr); /* release it again */
+
+#endif /* _M68K_DMA_H */
--- /dev/null
+#ifndef __ASMm68k_ELF_H
+#define __ASMm68k_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * 68k ELF relocation types
+ */
+#define R_68K_NONE 0
+#define R_68K_32 1
+#define R_68K_16 2
+#define R_68K_8 3
+#define R_68K_PC32 4
+#define R_68K_PC16 5
+#define R_68K_PC8 6
+#define R_68K_GOT32 7
+#define R_68K_GOT16 8
+#define R_68K_GOT8 9
+#define R_68K_GOT32O 10
+#define R_68K_GOT16O 11
+#define R_68K_GOT8O 12
+#define R_68K_PLT32 13
+#define R_68K_PLT16 14
+#define R_68K_PLT8 15
+#define R_68K_PLT32O 16
+#define R_68K_PLT16O 17
+#define R_68K_PLT8O 18
+#define R_68K_COPY 19
+#define R_68K_GLOB_DAT 20
+#define R_68K_JMP_SLOT 21
+#define R_68K_RELATIVE 22
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_m68kfp_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_68K)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2MSB
+#define ELF_ARCH EM_68K
+
+/* For SVR4/m68k the function pointer to be registered with `atexit' is
+ passed in %a1. Although my copy of the ABI has no such statement, it
+ is actually used on ASV. */
+#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE 4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#define ELF_ET_DYN_BASE 0xD0000000UL
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs) \
+ /* Bleech. */ \
+ pr_reg[0] = regs->d1; \
+ pr_reg[1] = regs->d2; \
+ pr_reg[2] = regs->d3; \
+ pr_reg[3] = regs->d4; \
+ pr_reg[4] = regs->d5; \
+ pr_reg[7] = regs->a0; \
+ pr_reg[8] = regs->a1; \
+ pr_reg[14] = regs->d0; \
+ pr_reg[15] = rdusp(); \
+ pr_reg[16] = 0 /* regs->orig_d0 */; \
+ pr_reg[17] = regs->sr; \
+ pr_reg[18] = regs->pc; \
+ /* pr_reg[19] = (regs->format << 12) | regs->vector; */ \
+ { \
+ struct switch_stack *sw = ((struct switch_stack *)regs) - 1; \
+ pr_reg[5] = sw->d6; \
+ pr_reg[6] = sw->d7; \
+ pr_reg[10] = sw->a3; \
+ pr_reg[11] = sw->a4; \
+ pr_reg[12] = sw->a5; \
+ pr_reg[13] = sw->a6; \
+ }
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this cpu supports. */
+
+#define ELF_HWCAP (0)
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo. */
+
+#define ELF_PLATFORM (NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+
+#endif
--- /dev/null
+/****************************************************************************/
+
+/*
+ * elia.h -- Lineo (formerly Moreton Bay) eLIA platform support.
+ *
+ * (C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au)
+ * (C) Copyright 1999-2000, Lineo (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef elia_h
+#define elia_h
+/****************************************************************************/
+
+#include <asm/coldfire.h>
+
+#ifdef CONFIG_eLIA
+
+/*
+ * The serial port DTR and DCD lines are also on the Parallel I/O
+ * as well, so define those too.
+ */
+
+#define eLIA_DCD1 0x0001
+#define eLIA_DCD0 0x0002
+#define eLIA_DTR1 0x0004
+#define eLIA_DTR0 0x0008
+
+#define eLIA_PCIRESET 0x0020
+
+/*
+ * Kernel macros to set and unset the LEDs.
+ */
+#ifndef __ASSEMBLY__
+extern unsigned short ppdata;
+#endif /* __ASSEMBLY__ */
+
+#endif /* CONFIG_eLIA */
+
+/****************************************************************************/
+#endif /* elia_h */
--- /dev/null
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
--- /dev/null
+#ifndef __M68KNOMMU_ENTRY_H
+#define __M68KNOMMU_ENTRY_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+/*
+ * Stack layout in 'ret_from_exception':
+ *
+ * This allows access to the syscall arguments in registers d1-d5
+ *
+ * 0(sp) - d1
+ * 4(sp) - d2
+ * 8(sp) - d3
+ * C(sp) - d4
+ * 10(sp) - d5
+ * 14(sp) - a0
+ * 18(sp) - a1
+ * 1C(sp) - a2
+ * 20(sp) - d0
+ * 24(sp) - orig_d0
+ * 28(sp) - stack adjustment
+ * 2C(sp) - [ sr ] [ format & vector ]
+ * 2E(sp) - [ pc-hiword ] [ sr ]
+ * 30(sp) - [ pc-loword ] [ pc-hiword ]
+ * 32(sp) - [ format & vector ] [ pc-loword ]
+ * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^
+ * M68K COLDFIRE
+ */
+
+#define ALLOWINT 0xf8ff
+
+#ifdef __ASSEMBLY__
+
+/* process bits for task_struct.flags */
+PF_TRACESYS_OFF = 3
+PF_TRACESYS_BIT = 5
+PF_PTRACED_OFF = 3
+PF_PTRACED_BIT = 4
+PF_DTRACE_OFF = 1
+PF_DTRACE_BIT = 5
+
+LENOSYS = 38
+
+#define SWITCH_STACK_SIZE (6*4+4) /* Includes return address */
+
+/*
+ * This defines the normal kernel pt-regs layout.
+ *
+ * regs are a2-a6 and d6-d7 preserved by C code
+ * the kernel doesn't mess with usp unless it needs to
+ */
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * This is made a little more tricky on the ColdFire. There is no
+ * separate kernel and user stack pointers. Need to artificially
+ * construct a usp in software... When doing this we need to disable
+ * interrupts, otherwise bad things could happen.
+ */
+.macro SAVE_ALL
+ move #0x2700,%sr /* disable intrs */
+ btst #5,%sp@(2) /* from user? */
+ bnes 6f /* no, skip */
+ movel %sp,sw_usp /* save user sp */
+ addql #8,sw_usp /* remove exception */
+ movel sw_ksp,%sp /* kernel sp */
+ subql #8,%sp /* room for exception */
+ clrl %sp@- /* stkadj */
+ movel %d0,%sp@- /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ lea %sp@(-32),%sp /* space for 8 regs */
+ moveml %d1-%d5/%a0-%a2,%sp@
+ movel sw_usp,%a0 /* get usp */
+ movel %a0@-,%sp@(PT_PC) /* copy exception program counter */
+ movel %a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */
+ bra 7f
+ 6:
+ clrl %sp@- /* stkadj */
+ movel %d0,%sp@- /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ lea %sp@(-32),%sp /* space for 8 regs */
+ moveml %d1-%d5/%a0-%a2,%sp@
+ 7:
+.endm
+
+.macro RESTORE_ALL
+ btst #5,%sp@(PT_SR) /* going user? */
+ bnes 8f /* no, skip */
+ move #0x2700,%sr /* disable intrs */
+ movel sw_usp,%a0 /* get usp */
+ movel %sp@(PT_PC),%a0@- /* copy exception program counter */
+ movel %sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */
+ moveml %sp@,%d1-%d5/%a0-%a2
+ lea %sp@(32),%sp /* space for 8 regs */
+ movel %sp@+,%d0
+ addql #4,%sp /* orig d0 */
+ addl %sp@+,%sp /* stkadj */
+ addql #8,%sp /* remove exception */
+ movel %sp,sw_ksp /* save ksp */
+ subql #8,sw_usp /* set exception */
+ movel sw_usp,%sp /* restore usp */
+ rte
+ 8:
+ moveml %sp@,%d1-%d5/%a0-%a2
+ lea %sp@(32),%sp /* space for 8 regs */
+ movel %sp@+,%d0
+ addql #4,%sp /* orig d0 */
+ addl %sp@+,%sp /* stkadj */
+ rte
+.endm
+
+/*
+ * Quick exception save, use current stack only.
+ */
+.macro SAVE_LOCAL
+ move #0x2700,%sr /* disable intrs */
+ clrl %sp@- /* stkadj */
+ movel %d0,%sp@- /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ lea %sp@(-32),%sp /* space for 8 regs */
+ moveml %d1-%d5/%a0-%a2,%sp@
+.endm
+
+.macro RESTORE_LOCAL
+ moveml %sp@,%d1-%d5/%a0-%a2
+ lea %sp@(32),%sp /* space for 8 regs */
+ movel %sp@+,%d0
+ addql #4,%sp /* orig d0 */
+ addl %sp@+,%sp /* stkadj */
+ rte
+.endm
+
+.macro SAVE_SWITCH_STACK
+ lea %sp@(-24),%sp /* 6 regs */
+ moveml %a3-%a6/%d6-%d7,%sp@
+.endm
+
+.macro RESTORE_SWITCH_STACK
+ moveml %sp@,%a3-%a6/%d6-%d7
+ lea %sp@(24),%sp /* 6 regs */
+.endm
+
+/*
+ * Software copy of the user and kernel stack pointers... Ugh...
+ * Need these to get around ColdFire not having separate kernel
+ * and user stack pointers.
+ */
+.globl sw_usp
+.globl sw_ksp
+
+#else /* !CONFIG_COLDFIRE */
+
+/*
+ * Standard 68k interrupt entry and exit macros.
+ */
+.macro SAVE_ALL
+ clrl %sp@- /* stkadj */
+ movel %d0,%sp@- /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ moveml %d1-%d5/%a0-%a2,%sp@-
+.endm
+
+.macro RESTORE_ALL
+ moveml %sp@+,%a0-%a2/%d1-%d5
+ movel %sp@+,%d0
+ addql #4,%sp /* orig d0 */
+ addl %sp@+,%sp /* stkadj */
+ rte
+.endm
+
+.macro SAVE_SWITCH_STACK
+ moveml %a3-%a6/%d6-%d7,%sp@-
+.endm
+
+.macro RESTORE_SWITCH_STACK
+ moveml %sp@+,%a3-%a6/%d6-%d7
+.endm
+
+#endif /* !CONFIG_COLDFIRE */
+#endif /* __ASSEMBLY__ */
+#endif /* __M68KNOMMU_ENTRY_H */
--- /dev/null
+#include <asm-m68k/errno.h>
--- /dev/null
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+ return 0;
+}
+
+#endif /* _ASM_FB_H_ */
--- /dev/null
+#include <asm-m68k/fcntl.h>
--- /dev/null
+/*
+ * include/asm-m68knommu/flat.h -- uClinux flat-format executables
+ */
+
+#ifndef __M68KNOMMU_FLAT_H__
+#define __M68KNOMMU_FLAT_H__
+
+#define flat_stack_align(sp) /* nothing needed */
+#define flat_argvp_envp_on_stack() 1
+#define flat_old_ram_flag(flags) (flags)
+#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
+#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp)
+#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp)
+#define flat_get_relocate_addr(rel) (rel)
+#define flat_set_persistent(relval, p) 0
+
+#endif /* __M68KNOMMU_FLAT_H__ */
--- /dev/null
+#ifndef __M68KNOMMU_FPU_H
+#define __M68KNOMMU_FPU_H
+
+
+/*
+ * MAX floating point unit state size (FSAVE/FRESTORE)
+ */
+#if defined(CONFIG_M68020) || defined(CONFIG_M68030)
+#define FPSTATESIZE (216/sizeof(unsigned char))
+#elif defined(CONFIG_M68040)
+#define FPSTATESIZE (96/sizeof(unsigned char))
+#elif defined(CONFIG_M68KFPU_EMU)
+#define FPSTATESIZE (28/sizeof(unsigned char))
+#elif defined(CONFIG_M68060)
+#define FPSTATESIZE (12/sizeof(unsigned char))
+#else
+/* Assume no FP unit present then... */
+#define FPSTATESIZE (2) /* dummy size */
+#endif
+
+#endif /* __M68K_FPU_H */
--- /dev/null
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif
--- /dev/null
+#ifndef __M68K_HARDIRQ_H
+#define __M68K_HARDIRQ_H
+
+#include <linux/cache.h>
+#include <linux/threads.h>
+#include <asm/irq.h>
+
+typedef struct {
+ unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS 8
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+void ack_bad_irq(unsigned int irq);
+
+#endif /* __M68K_HARDIRQ_H */
--- /dev/null
+#ifndef __M68KNOMMU_HW_IRQ_H__
+#define __M68KNOMMU_HW_IRQ_H__
+
+#endif /* __M68KNOMMU_HW_IRQ_H__ */
--- /dev/null
+#include <asm-m68k/hwtest.h>
--- /dev/null
+#ifndef _M68KNOMMU_IO_H
+#define _M68KNOMMU_IO_H
+
+#ifdef __KERNEL__
+
+
+/*
+ * These are for ISA/PCI shared memory _only_ and should never be used
+ * on any other type of memory, including Zorro memory. They are meant to
+ * access the bus in the bus byte order which is little-endian!.
+ *
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the m68k architecture, we just read/write the
+ * memory location directly.
+ */
+/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
+ * two accesses to memory, which may be undesireable for some devices.
+ */
+
+/*
+ * swap functions are sometimes needed to interface little-endian hardware
+ */
+static inline unsigned short _swapw(volatile unsigned short v)
+{
+ return ((v << 8) | (v >> 8));
+}
+
+static inline unsigned int _swapl(volatile unsigned long v)
+{
+ return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
+}
+
+#define readb(addr) \
+ ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
+#define readw(addr) \
+ ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
+#define readl(addr) \
+ ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
+#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
+#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+static inline void io_outsb(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned char *ap = (volatile unsigned char *) addr;
+ unsigned char *bp = (unsigned char *) buf;
+ while (len--)
+ *ap = *bp++;
+}
+
+static inline void io_outsw(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned short *ap = (volatile unsigned short *) addr;
+ unsigned short *bp = (unsigned short *) buf;
+ while (len--)
+ *ap = _swapw(*bp++);
+}
+
+static inline void io_outsl(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned int *ap = (volatile unsigned int *) addr;
+ unsigned int *bp = (unsigned int *) buf;
+ while (len--)
+ *ap = _swapl(*bp++);
+}
+
+static inline void io_insb(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned char *ap = (volatile unsigned char *) addr;
+ unsigned char *bp = (unsigned char *) buf;
+ while (len--)
+ *bp++ = *ap;
+}
+
+static inline void io_insw(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned short *ap = (volatile unsigned short *) addr;
+ unsigned short *bp = (unsigned short *) buf;
+ while (len--)
+ *bp++ = _swapw(*ap);
+}
+
+static inline void io_insl(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned int *ap = (volatile unsigned int *) addr;
+ unsigned int *bp = (unsigned int *) buf;
+ while (len--)
+ *bp++ = _swapl(*ap);
+}
+
+#define mmiowb()
+
+/*
+ * make the short names macros so specific devices
+ * can override them as required
+ */
+
+#define memset_io(a,b,c) memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
+
+#define inb(addr) readb(addr)
+#define inw(addr) readw(addr)
+#define inl(addr) readl(addr)
+#define outb(x,addr) ((void) writeb(x,addr))
+#define outw(x,addr) ((void) writew(x,addr))
+#define outl(x,addr) ((void) writel(x,addr))
+
+#define inb_p(addr) inb(addr)
+#define inw_p(addr) inw(addr)
+#define inl_p(addr) inl(addr)
+#define outb_p(x,addr) outb(x,addr)
+#define outw_p(x,addr) outw(x,addr)
+#define outl_p(x,addr) outl(x,addr)
+
+#define outsb(a,b,l) io_outsb(a,b,l)
+#define outsw(a,b,l) io_outsw(a,b,l)
+#define outsl(a,b,l) io_outsl(a,b,l)
+
+#define insb(a,b,l) io_insb(a,b,l)
+#define insw(a,b,l) io_insw(a,b,l)
+#define insl(a,b,l) io_insl(a,b,l)
+
+#define IO_SPACE_LIMIT 0xffff
+
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING 0
+#define IOMAP_NOCACHE_SER 1
+#define IOMAP_NOCACHE_NONSER 2
+#define IOMAP_WRITETHROUGH 3
+
+extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
+extern void __iounmap(void *addr, unsigned long size);
+
+static inline void *ioremap(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+extern void iounmap(void *addr);
+
+/* Pages to physical address... */
+#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
+#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT)
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+#define phys_to_virt(vaddr) ((void *) (vaddr))
+#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p) p
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68KNOMMU_IO_H */
--- /dev/null
+#include <asm-generic/ioctl.h>
--- /dev/null
+#include <asm-m68k/ioctls.h>
--- /dev/null
+#include <asm-m68k/ipcbuf.h>
--- /dev/null
+#ifndef _M68KNOMMU_IRQ_H_
+#define _M68KNOMMU_IRQ_H_
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * On the ColdFire we keep track of all vectors. That way drivers
+ * can register whatever vector number they wish, and we can deal
+ * with it.
+ */
+#define SYS_IRQS 256
+#define NR_IRQS SYS_IRQS
+
+#else
+
+/*
+ * # of m68k interrupts
+ */
+#define SYS_IRQS 8
+#define NR_IRQS (24 + SYS_IRQS)
+
+#endif /* CONFIG_COLDFIRE */
+
+
+#define irq_canonicalize(irq) (irq)
+
+#endif /* _M68KNOMMU_IRQ_H_ */
--- /dev/null
+#include <asm-generic/irq_regs.h>
--- /dev/null
+#include <asm-generic/kdebug.h>
--- /dev/null
+#ifndef __ASM_M68K_KMAP_TYPES_H
+#define __ASM_M68K_KMAP_TYPES_H
+
+enum km_type {
+ KM_BOUNCE_READ,
+ KM_SKB_SUNRPC_DATA,
+ KM_SKB_DATA_SOFTIRQ,
+ KM_USER0,
+ KM_USER1,
+ KM_BIO_SRC_IRQ,
+ KM_BIO_DST_IRQ,
+ KM_PTE0,
+ KM_PTE1,
+ KM_IRQ0,
+ KM_IRQ1,
+ KM_SOFTIRQ0,
+ KM_SOFTIRQ1,
+ KM_TYPE_NR
+};
+
+#endif
--- /dev/null
+#include <asm-m68k/linkage.h>
--- /dev/null
+#ifndef __M68KNOMMU_LOCAL_H
+#define __M68KNOMMU_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* __M68KNOMMU_LOCAL_H */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m5206sim.h -- ColdFire 5206 System Integration Module support.
+ *
+ * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef m5206sim_h
+#define m5206sim_h
+/****************************************************************************/
+
+
+/*
+ * Define the 5206 SIM register set addresses.
+ */
+#define MCFSIM_SIMR 0x03 /* SIM Config reg (r/w) */
+#define MCFSIM_ICR1 0x14 /* Intr Ctrl reg 1 (r/w) */
+#define MCFSIM_ICR2 0x15 /* Intr Ctrl reg 2 (r/w) */
+#define MCFSIM_ICR3 0x16 /* Intr Ctrl reg 3 (r/w) */
+#define MCFSIM_ICR4 0x17 /* Intr Ctrl reg 4 (r/w) */
+#define MCFSIM_ICR5 0x18 /* Intr Ctrl reg 5 (r/w) */
+#define MCFSIM_ICR6 0x19 /* Intr Ctrl reg 6 (r/w) */
+#define MCFSIM_ICR7 0x1a /* Intr Ctrl reg 7 (r/w) */
+#define MCFSIM_ICR8 0x1b /* Intr Ctrl reg 8 (r/w) */
+#define MCFSIM_ICR9 0x1c /* Intr Ctrl reg 9 (r/w) */
+#define MCFSIM_ICR10 0x1d /* Intr Ctrl reg 10 (r/w) */
+#define MCFSIM_ICR11 0x1e /* Intr Ctrl reg 11 (r/w) */
+#define MCFSIM_ICR12 0x1f /* Intr Ctrl reg 12 (r/w) */
+#define MCFSIM_ICR13 0x20 /* Intr Ctrl reg 13 (r/w) */
+#ifdef CONFIG_M5206e
+#define MCFSIM_ICR14 0x21 /* Intr Ctrl reg 14 (r/w) */
+#define MCFSIM_ICR15 0x22 /* Intr Ctrl reg 15 (r/w) */
+#endif
+
+#define MCFSIM_IMR 0x36 /* Interrupt Mask reg (r/w) */
+#define MCFSIM_IPR 0x3a /* Interrupt Pend reg (r/w) */
+
+#define MCFSIM_RSR 0x40 /* Reset Status reg (r/w) */
+#define MCFSIM_SYPCR 0x41 /* System Protection reg (r/w)*/
+
+#define MCFSIM_SWIVR 0x42 /* SW Watchdog intr reg (r/w) */
+#define MCFSIM_SWSR 0x43 /* SW Watchdog service (r/w) */
+
+#define MCFSIM_DCRR 0x46 /* DRAM Refresh reg (r/w) */
+#define MCFSIM_DCTR 0x4a /* DRAM Timing reg (r/w) */
+#define MCFSIM_DAR0 0x4c /* DRAM 0 Address reg(r/w) */
+#define MCFSIM_DMR0 0x50 /* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DCR0 0x57 /* DRAM 0 Control reg (r/w) */
+#define MCFSIM_DAR1 0x58 /* DRAM 1 Address reg (r/w) */
+#define MCFSIM_DMR1 0x5c /* DRAM 1 Mask reg (r/w) */
+#define MCFSIM_DCR1 0x63 /* DRAM 1 Control reg (r/w) */
+
+#define MCFSIM_CSAR0 0x64 /* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0 0x68 /* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0 0x6e /* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1 0x70 /* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1 0x74 /* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1 0x7a /* CS 1 Control reg (r/w) */
+#define MCFSIM_CSAR2 0x7c /* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2 0x80 /* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2 0x86 /* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3 0x88 /* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3 0x8c /* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3 0x92 /* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4 0x94 /* CS 4 Address reg (r/w) */
+#define MCFSIM_CSMR4 0x98 /* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4 0x9e /* CS 4 Control reg (r/w) */
+#define MCFSIM_CSAR5 0xa0 /* CS 5 Address reg (r/w) */
+#define MCFSIM_CSMR5 0xa4 /* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5 0xaa /* CS 5 Control reg (r/w) */
+#define MCFSIM_CSAR6 0xac /* CS 6 Address reg (r/w) */
+#define MCFSIM_CSMR6 0xb0 /* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6 0xb6 /* CS 6 Control reg (r/w) */
+#define MCFSIM_CSAR7 0xb8 /* CS 7 Address reg (r/w) */
+#define MCFSIM_CSMR7 0xbc /* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7 0xc2 /* CS 7 Control reg (r/w) */
+#define MCFSIM_DMCR 0xc6 /* Default control */
+
+#ifdef CONFIG_M5206e
+#define MCFSIM_PAR 0xca /* Pin Assignment reg (r/w) */
+#else
+#define MCFSIM_PAR 0xcb /* Pin Assignment reg (r/w) */
+#endif
+
+#define MCFSIM_PADDR 0x1c5 /* Parallel Direction (r/w) */
+#define MCFSIM_PADAT 0x1c9 /* Parallel Port Value (r/w) */
+
+/*
+ * Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#ifdef CONFIG_M5206e
+#define MCFSIM_PAR_DREQ0 0x100 /* Set to select DREQ0 input */
+ /* Clear to select T0 input */
+#define MCFSIM_PAR_DREQ1 0x200 /* Select DREQ1 input */
+ /* Clear to select T0 output */
+#endif
+
+/*
+ * Some symbol defines for the Interrupt Control Register
+ */
+#define MCFSIM_SWDICR MCFSIM_ICR8 /* Watchdog timer ICR */
+#define MCFSIM_TIMER1ICR MCFSIM_ICR9 /* Timer 1 ICR */
+#define MCFSIM_TIMER2ICR MCFSIM_ICR10 /* Timer 2 ICR */
+#define MCFSIM_UART1ICR MCFSIM_ICR12 /* UART 1 ICR */
+#define MCFSIM_UART2ICR MCFSIM_ICR13 /* UART 2 ICR */
+#ifdef CONFIG_M5206e
+#define MCFSIM_DMA1ICR MCFSIM_ICR14 /* DMA 1 ICR */
+#define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */
+#endif
+
+#if defined(CONFIG_M5206e)
+#define MCFSIM_IMR_MASKALL 0xfffe /* All SIM intr sources */
+#endif
+
+/*
+ * Macro to get and set IMR register. It is 16 bits on the 5206.
+ */
+#define mcf_getimr() \
+ *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR))
+
+#define mcf_setimr(imr) \
+ *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr)
+
+#define mcf_getipr() \
+ *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR))
+
+/****************************************************************************/
+#endif /* m5206sim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m520xsim.h -- ColdFire 5207/5208 System Integration Module support.
+ *
+ * (C) Copyright 2005, Intec Automation (mike@steroidmicros.com)
+ */
+
+/****************************************************************************/
+#ifndef m520xsim_h
+#define m520xsim_h
+/****************************************************************************/
+
+
+/*
+ * Define the 5282 SIM register set addresses.
+ */
+#define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */
+#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
+#define MCFINTC_ICR0 0x40 /* Base ICR register */
+
+#define MCFINT_VECBASE 64
+#define MCFINT_UART0 26 /* Interrupt number for UART0 */
+#define MCFINT_UART1 27 /* Interrupt number for UART1 */
+#define MCFINT_UART2 28 /* Interrupt number for UART2 */
+#define MCFINT_QSPI 31 /* Interrupt number for QSPI */
+#define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */
+
+/*
+ * SDRAM configuration registers.
+ */
+#define MCFSIM_SDMR 0x000a8000 /* SDRAM Mode/Extended Mode Register */
+#define MCFSIM_SDCR 0x000a8004 /* SDRAM Control Register */
+#define MCFSIM_SDCFG1 0x000a8008 /* SDRAM Configuration Register 1 */
+#define MCFSIM_SDCFG2 0x000a800c /* SDRAM Configuration Register 2 */
+#define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */
+#define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */
+
+
+#define MCF_GPIO_PAR_UART (0xA4036)
+#define MCF_GPIO_PAR_FECI2C (0xA4033)
+#define MCF_GPIO_PAR_FEC (0xA4038)
+
+#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001)
+#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0002)
+
+#define MCF_GPIO_PAR_UART_PAR_URXD1 (0x0040)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1 (0x0080)
+
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04)
+
+#define ICR_INTRCONF 0x05
+#define MCFPIT_IMR MCFINTC_IMRL
+#define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1)
+
+/****************************************************************************/
+#endif /* m520xsim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m523xsim.h -- ColdFire 523x System Integration Module support.
+ *
+ * (C) Copyright 2003-2005, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/****************************************************************************/
+#ifndef m523xsim_h
+#define m523xsim_h
+/****************************************************************************/
+
+
+/*
+ * Define the 523x SIM register set addresses.
+ */
+#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */
+#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */
+#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
+#define MCFINTC_IRLR 0x18 /* */
+#define MCFINTC_IACKL 0x19 /* */
+#define MCFINTC_ICR0 0x40 /* Base ICR register */
+
+#define MCFINT_VECBASE 64 /* Vector base number */
+#define MCFINT_UART0 13 /* Interrupt number for UART0 */
+#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
+#define MCFINT_QSPI 18 /* Interrupt number for QSPI */
+
+/*
+ * SDRAM configuration registers.
+ */
+#define MCFSIM_DCR 0x44 /* SDRAM control */
+#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */
+#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */
+#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
+#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
+
+/****************************************************************************/
+#endif /* m523xsim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m5249sim.h -- ColdFire 5249 System Integration Module support.
+ *
+ * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef m5249sim_h
+#define m5249sim_h
+/****************************************************************************/
+
+/*
+ * Define the 5249 SIM register set addresses.
+ */
+#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */
+#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/
+#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */
+#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */
+#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */
+#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */
+#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/
+#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */
+#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */
+#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */
+#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */
+#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */
+#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */
+#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */
+#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */
+#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */
+#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */
+#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */
+#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */
+#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */
+#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */
+#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
+#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
+
+#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
+
+
+/*
+ * Some symbol defines for the above...
+ */
+#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
+#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
+#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
+#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
+#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
+#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
+#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
+#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
+#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
+
+/*
+ * General purpose IO registers (in MBAR2).
+ */
+#define MCFSIM2_GPIOREAD 0x0 /* GPIO read values */
+#define MCFSIM2_GPIOWRITE 0x4 /* GPIO write values */
+#define MCFSIM2_GPIOENABLE 0x8 /* GPIO enabled */
+#define MCFSIM2_GPIOFUNC 0xc /* GPIO function */
+#define MCFSIM2_GPIO1READ 0xb0 /* GPIO1 read values */
+#define MCFSIM2_GPIO1WRITE 0xb4 /* GPIO1 write values */
+#define MCFSIM2_GPIO1ENABLE 0xb8 /* GPIO1 enabled */
+#define MCFSIM2_GPIO1FUNC 0xbc /* GPIO1 function */
+
+#define MCFSIM2_GPIOINTSTAT 0xc0 /* GPIO interrupt status */
+#define MCFSIM2_GPIOINTCLEAR 0xc0 /* GPIO interrupt clear */
+#define MCFSIM2_GPIOINTENABLE 0xc4 /* GPIO interrupt enable */
+
+#define MCFSIM2_INTLEVEL1 0x140 /* Interrupt level reg 1 */
+#define MCFSIM2_INTLEVEL2 0x144 /* Interrupt level reg 2 */
+#define MCFSIM2_INTLEVEL3 0x148 /* Interrupt level reg 3 */
+#define MCFSIM2_INTLEVEL4 0x14c /* Interrupt level reg 4 */
+#define MCFSIM2_INTLEVEL5 0x150 /* Interrupt level reg 5 */
+#define MCFSIM2_INTLEVEL6 0x154 /* Interrupt level reg 6 */
+#define MCFSIM2_INTLEVEL7 0x158 /* Interrupt level reg 7 */
+#define MCFSIM2_INTLEVEL8 0x15c /* Interrupt level reg 8 */
+
+#define MCFSIM2_DMAROUTE 0x188 /* DMA routing */
+
+#define MCFSIM2_IDECONFIG1 0x18c /* IDEconfig1 */
+#define MCFSIM2_IDECONFIG2 0x190 /* IDEconfig2 */
+
+
+/*
+ * Macro to set IMR register. It is 32 bits on the 5249.
+ */
+#define MCFSIM_IMR_MASKALL 0x7fffe /* All SIM intr sources */
+
+#define mcf_getimr() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define mcf_setimr(imr) \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define mcf_getipr() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+/****************************************************************************/
+
+#ifdef __ASSEMBLER__
+
+/*
+ * The M5249C3 board needs a little help getting all its SIM devices
+ * initialized at kernel start time. dBUG doesn't set much up, so
+ * we need to do it manually.
+ */
+.macro m5249c3_setup
+ /*
+ * Set MBAR1 and MBAR2, just incase they are not set.
+ */
+ movel #0x10000001,%a0
+ movec %a0,%MBAR /* map MBAR region */
+ subql #1,%a0 /* get MBAR address in a0 */
+
+ movel #0x80000001,%a1
+ movec %a1,#3086 /* map MBAR2 region */
+ subql #1,%a1 /* get MBAR2 address in a1 */
+
+ /*
+ * Move secondary interrupts to base at 128.
+ */
+ moveb #0x80,%d0
+ moveb %d0,0x16b(%a1) /* interrupt base register */
+
+ /*
+ * Work around broken CSMR0/DRAM vector problem.
+ */
+ movel #0x001F0021,%d0 /* disable C/I bit */
+ movel %d0,0x84(%a0) /* set CSMR0 */
+
+ /*
+ * Disable the PLL firstly. (Who knows what state it is
+ * in here!).
+ */
+ movel 0x180(%a1),%d0 /* get current PLL value */
+ andl #0xfffffffe,%d0 /* PLL bypass first */
+ movel %d0,0x180(%a1) /* set PLL register */
+ nop
+
+#if CONFIG_CLOCK_FREQ == 140000000
+ /*
+ * Set initial clock frequency. This assumes M5249C3 board
+ * is fitted with 11.2896MHz crystal. It will program the
+ * PLL for 140MHz. Lets go fast :-)
+ */
+ movel #0x125a40f0,%d0 /* set for 140MHz */
+ movel %d0,0x180(%a1) /* set PLL register */
+ orl #0x1,%d0
+ movel %d0,0x180(%a1) /* set PLL register */
+#endif
+
+ /*
+ * Setup CS1 for ethernet controller.
+ * (Setup as per M5249C3 doco).
+ */
+ movel #0xe0000000,%d0 /* CS1 mapped at 0xe0000000 */
+ movel %d0,0x8c(%a0)
+ movel #0x001f0021,%d0 /* CS1 size of 1Mb */
+ movel %d0,0x90(%a0)
+ movew #0x0080,%d0 /* CS1 = 16bit port, AA */
+ movew %d0,0x96(%a0)
+
+ /*
+ * Setup CS2 for IDE interface.
+ */
+ movel #0x50000000,%d0 /* CS2 mapped at 0x50000000 */
+ movel %d0,0x98(%a0)
+ movel #0x001f0001,%d0 /* CS2 size of 1MB */
+ movel %d0,0x9c(%a0)
+ movew #0x0080,%d0 /* CS2 = 16bit, TA */
+ movew %d0,0xa2(%a0)
+
+ movel #0x00107000,%d0 /* IDEconfig1 */
+ movel %d0,0x18c(%a1)
+ movel #0x000c0400,%d0 /* IDEconfig2 */
+ movel %d0,0x190(%a1)
+
+ movel #0x00080000,%d0 /* GPIO19, IDE reset bit */
+ orl %d0,0xc(%a1) /* function GPIO19 */
+ orl %d0,0x8(%a1) /* enable GPIO19 as output */
+ orl %d0,0x4(%a1) /* de-assert IDE reset */
+.endm
+
+#define PLATFORM_SETUP m5249c3_setup
+
+#endif /* __ASSEMBLER__ */
+
+/****************************************************************************/
+#endif /* m5249sim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m5272sim.h -- ColdFire 5272 System Integration Module support.
+ *
+ * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef m5272sim_h
+#define m5272sim_h
+/****************************************************************************/
+
+
+/*
+ * Define the 5272 SIM register set addresses.
+ */
+#define MCFSIM_SCR 0x04 /* SIM Config reg (r/w) */
+#define MCFSIM_SPR 0x06 /* System Protection reg (r/w)*/
+#define MCFSIM_PMR 0x08 /* Power Management reg (r/w) */
+#define MCFSIM_APMR 0x0e /* Active Low Power reg (r/w) */
+#define MCFSIM_DIR 0x10 /* Device Identity reg (r/w) */
+
+#define MCFSIM_ICR1 0x20 /* Intr Ctrl reg 1 (r/w) */
+#define MCFSIM_ICR2 0x24 /* Intr Ctrl reg 2 (r/w) */
+#define MCFSIM_ICR3 0x28 /* Intr Ctrl reg 3 (r/w) */
+#define MCFSIM_ICR4 0x2c /* Intr Ctrl reg 4 (r/w) */
+
+#define MCFSIM_ISR 0x30 /* Interrupt Source reg (r/w) */
+#define MCFSIM_PITR 0x34 /* Interrupt Transition (r/w) */
+#define MCFSIM_PIWR 0x38 /* Interrupt Wakeup reg (r/w) */
+#define MCFSIM_PIVR 0x3f /* Interrupt Vector reg (r/w( */
+
+#define MCFSIM_WRRR 0x280 /* Watchdog reference (r/w) */
+#define MCFSIM_WIRR 0x284 /* Watchdog interrupt (r/w) */
+#define MCFSIM_WCR 0x288 /* Watchdog counter (r/w) */
+#define MCFSIM_WER 0x28c /* Watchdog event (r/w) */
+
+#define MCFSIM_CSBR0 0x40 /* CS0 Base Address (r/w) */
+#define MCFSIM_CSOR0 0x44 /* CS0 Option (r/w) */
+#define MCFSIM_CSBR1 0x48 /* CS1 Base Address (r/w) */
+#define MCFSIM_CSOR1 0x4c /* CS1 Option (r/w) */
+#define MCFSIM_CSBR2 0x50 /* CS2 Base Address (r/w) */
+#define MCFSIM_CSOR2 0x54 /* CS2 Option (r/w) */
+#define MCFSIM_CSBR3 0x58 /* CS3 Base Address (r/w) */
+#define MCFSIM_CSOR3 0x5c /* CS3 Option (r/w) */
+#define MCFSIM_CSBR4 0x60 /* CS4 Base Address (r/w) */
+#define MCFSIM_CSOR4 0x64 /* CS4 Option (r/w) */
+#define MCFSIM_CSBR5 0x68 /* CS5 Base Address (r/w) */
+#define MCFSIM_CSOR5 0x6c /* CS5 Option (r/w) */
+#define MCFSIM_CSBR6 0x70 /* CS6 Base Address (r/w) */
+#define MCFSIM_CSOR6 0x74 /* CS6 Option (r/w) */
+#define MCFSIM_CSBR7 0x78 /* CS7 Base Address (r/w) */
+#define MCFSIM_CSOR7 0x7c /* CS7 Option (r/w) */
+
+#define MCFSIM_SDCR 0x180 /* SDRAM Configuration (r/w) */
+#define MCFSIM_SDTR 0x184 /* SDRAM Timing (r/w) */
+#define MCFSIM_DCAR0 0x4c /* DRAM 0 Address reg(r/w) */
+#define MCFSIM_DCMR0 0x50 /* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DCCR0 0x57 /* DRAM 0 Control reg (r/w) */
+#define MCFSIM_DCAR1 0x58 /* DRAM 1 Address reg (r/w) */
+#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */
+#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */
+
+#define MCFSIM_PACNT 0x80 /* Port A Control (r/w) */
+#define MCFSIM_PADDR 0x84 /* Port A Direction (r/w) */
+#define MCFSIM_PADAT 0x86 /* Port A Data (r/w) */
+#define MCFSIM_PBCNT 0x88 /* Port B Control (r/w) */
+#define MCFSIM_PBDDR 0x8c /* Port B Direction (r/w) */
+#define MCFSIM_PBDAT 0x8e /* Port B Data (r/w) */
+#define MCFSIM_PCDDR 0x94 /* Port C Direction (r/w) */
+#define MCFSIM_PCDAT 0x96 /* Port C Data (r/w) */
+#define MCFSIM_PDCNT 0x98 /* Port D Control (r/w) */
+
+
+/****************************************************************************/
+#endif /* m5272sim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m527xsim.h -- ColdFire 5270/5271 System Integration Module support.
+ *
+ * (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef m527xsim_h
+#define m527xsim_h
+/****************************************************************************/
+
+
+/*
+ * Define the 5270/5271 SIM register set addresses.
+ */
+#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */
+#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 1 */
+#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
+#define MCFINTC_IRLR 0x18 /* */
+#define MCFINTC_IACKL 0x19 /* */
+#define MCFINTC_ICR0 0x40 /* Base ICR register */
+
+#define MCFINT_VECBASE 64 /* Vector base number */
+#define MCFINT_UART0 13 /* Interrupt number for UART0 */
+#define MCFINT_UART1 14 /* Interrupt number for UART1 */
+#define MCFINT_UART2 15 /* Interrupt number for UART2 */
+#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
+
+/*
+ * SDRAM configuration registers.
+ */
+#ifdef CONFIG_M5271
+#define MCFSIM_DCR 0x40 /* SDRAM control */
+#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */
+#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */
+#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
+#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
+#endif
+#ifdef CONFIG_M5275
+#define MCFSIM_DMR 0x40 /* SDRAM mode */
+#define MCFSIM_DCR 0x44 /* SDRAM control */
+#define MCFSIM_DCFG1 0x48 /* SDRAM configuration 1 */
+#define MCFSIM_DCFG2 0x4c /* SDRAM configuration 2 */
+#define MCFSIM_DBAR0 0x50 /* SDRAM base address 0 */
+#define MCFSIM_DMR0 0x54 /* SDRAM address mask 0 */
+#define MCFSIM_DBAR1 0x58 /* SDRAM base address 1 */
+#define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */
+#endif
+
+/*
+ * GPIO pins setups to enable the UARTs.
+ */
+#ifdef CONFIG_M5271
+#define MCF_GPIO_PAR_UART 0x100048 /* PAR UART address */
+#define UART0_ENABLE_MASK 0x000f
+#define UART1_ENABLE_MASK 0x0ff0
+#define UART2_ENABLE_MASK 0x3000
+#endif
+#ifdef CONFIG_M5275
+#define MCF_GPIO_PAR_UART 0x10007c /* PAR UART address */
+#define UART0_ENABLE_MASK 0x000f
+#define UART1_ENABLE_MASK 0x00f0
+#define UART2_ENABLE_MASK 0x3f00
+#endif
+
+/****************************************************************************/
+#endif /* m527xsim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m528xsim.h -- ColdFire 5280/5282 System Integration Module support.
+ *
+ * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef m528xsim_h
+#define m528xsim_h
+/****************************************************************************/
+
+
+/*
+ * Define the 5280/5282 SIM register set addresses.
+ */
+#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */
+#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */
+#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
+#define MCFINTC_IRLR 0x18 /* */
+#define MCFINTC_IACKL 0x19 /* */
+#define MCFINTC_ICR0 0x40 /* Base ICR register */
+
+#define MCFINT_VECBASE 64 /* Vector base number */
+#define MCFINT_UART0 13 /* Interrupt number for UART0 */
+#define MCFINT_PIT1 55 /* Interrupt number for PIT1 */
+
+/*
+ * SDRAM configuration registers.
+ */
+#define MCFSIM_DCR 0x44 /* SDRAM control */
+#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */
+#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */
+#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
+#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
+
+/*
+ * Derek Cheung - 6 Feb 2005
+ * add I2C and QSPI register definition using Freescale's MCF5282
+ */
+/* set Port AS pin for I2C or UART */
+#define MCF5282_GPIO_PASPAR (volatile u16 *) (MCF_IPSBAR + 0x00100056)
+
+/* Port UA Pin Assignment Register (8 Bit) */
+#define MCF5282_GPIO_PUAPAR 0x10005C
+
+/* Interrupt Mask Register Register Low */
+#define MCF5282_INTC0_IMRL (volatile u32 *) (MCF_IPSBAR + 0x0C0C)
+/* Interrupt Control Register 7 */
+#define MCF5282_INTC0_ICR17 (volatile u8 *) (MCF_IPSBAR + 0x0C51)
+
+
+
+/*********************************************************************
+*
+* Inter-IC (I2C) Module
+*
+*********************************************************************/
+/* Read/Write access macros for general use */
+#define MCF5282_I2C_I2ADR (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address
+#define MCF5282_I2C_I2FDR (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider
+#define MCF5282_I2C_I2CR (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control
+#define MCF5282_I2C_I2SR (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status
+#define MCF5282_I2C_I2DR (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O
+
+/* Bit level definitions and macros */
+#define MCF5282_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01)
+
+#define MCF5282_I2C_I2FDR_IC(x) (((x)&0x3F))
+
+#define MCF5282_I2C_I2CR_IEN (0x80) // I2C enable
+#define MCF5282_I2C_I2CR_IIEN (0x40) // interrupt enable
+#define MCF5282_I2C_I2CR_MSTA (0x20) // master/slave mode
+#define MCF5282_I2C_I2CR_MTX (0x10) // transmit/receive mode
+#define MCF5282_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable
+#define MCF5282_I2C_I2CR_RSTA (0x04) // repeat start
+
+#define MCF5282_I2C_I2SR_ICF (0x80) // data transfer bit
+#define MCF5282_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave
+#define MCF5282_I2C_I2SR_IBB (0x20) // I2C bus busy
+#define MCF5282_I2C_I2SR_IAL (0x10) // aribitration lost
+#define MCF5282_I2C_I2SR_SRW (0x04) // slave read/write
+#define MCF5282_I2C_I2SR_IIF (0x02) // I2C interrupt
+#define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge
+
+
+
+/*********************************************************************
+*
+* Queued Serial Peripheral Interface (QSPI) Module
+*
+*********************************************************************/
+/* Derek - 21 Feb 2005 */
+/* change to the format used in I2C */
+/* Read/Write access macros for general use */
+#define MCF5282_QSPI_QMR MCF_IPSBAR + 0x0340
+#define MCF5282_QSPI_QDLYR MCF_IPSBAR + 0x0344
+#define MCF5282_QSPI_QWR MCF_IPSBAR + 0x0348
+#define MCF5282_QSPI_QIR MCF_IPSBAR + 0x034C
+#define MCF5282_QSPI_QAR MCF_IPSBAR + 0x0350
+#define MCF5282_QSPI_QDR MCF_IPSBAR + 0x0354
+#define MCF5282_QSPI_QCR MCF_IPSBAR + 0x0354
+
+/* Bit level definitions and macros */
+#define MCF5282_QSPI_QMR_MSTR (0x8000)
+#define MCF5282_QSPI_QMR_DOHIE (0x4000)
+#define MCF5282_QSPI_QMR_BITS_16 (0x0000)
+#define MCF5282_QSPI_QMR_BITS_8 (0x2000)
+#define MCF5282_QSPI_QMR_BITS_9 (0x2400)
+#define MCF5282_QSPI_QMR_BITS_10 (0x2800)
+#define MCF5282_QSPI_QMR_BITS_11 (0x2C00)
+#define MCF5282_QSPI_QMR_BITS_12 (0x3000)
+#define MCF5282_QSPI_QMR_BITS_13 (0x3400)
+#define MCF5282_QSPI_QMR_BITS_14 (0x3800)
+#define MCF5282_QSPI_QMR_BITS_15 (0x3C00)
+#define MCF5282_QSPI_QMR_CPOL (0x0200)
+#define MCF5282_QSPI_QMR_CPHA (0x0100)
+#define MCF5282_QSPI_QMR_BAUD(x) (((x)&0x00FF))
+
+#define MCF5282_QSPI_QDLYR_SPE (0x80)
+#define MCF5282_QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8)
+#define MCF5282_QSPI_QDLYR_DTL(x) (((x)&0x00FF))
+
+#define MCF5282_QSPI_QWR_HALT (0x8000)
+#define MCF5282_QSPI_QWR_WREN (0x4000)
+#define MCF5282_QSPI_QWR_WRTO (0x2000)
+#define MCF5282_QSPI_QWR_CSIV (0x1000)
+#define MCF5282_QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8)
+#define MCF5282_QSPI_QWR_CPTQP(x) (((x)&0x000F)<<4)
+#define MCF5282_QSPI_QWR_NEWQP(x) (((x)&0x000F))
+
+#define MCF5282_QSPI_QIR_WCEFB (0x8000)
+#define MCF5282_QSPI_QIR_ABRTB (0x4000)
+#define MCF5282_QSPI_QIR_ABRTL (0x1000)
+#define MCF5282_QSPI_QIR_WCEFE (0x0800)
+#define MCF5282_QSPI_QIR_ABRTE (0x0400)
+#define MCF5282_QSPI_QIR_SPIFE (0x0100)
+#define MCF5282_QSPI_QIR_WCEF (0x0008)
+#define MCF5282_QSPI_QIR_ABRT (0x0004)
+#define MCF5282_QSPI_QIR_SPIF (0x0001)
+
+#define MCF5282_QSPI_QAR_ADDR(x) (((x)&0x003F))
+
+#define MCF5282_QSPI_QDR_COMMAND(x) (((x)&0xFF00))
+#define MCF5282_QSPI_QCR_DATA(x) (((x)&0x00FF)<<8)
+#define MCF5282_QSPI_QCR_CONT (0x8000)
+#define MCF5282_QSPI_QCR_BITSE (0x4000)
+#define MCF5282_QSPI_QCR_DT (0x2000)
+#define MCF5282_QSPI_QCR_DSCK (0x1000)
+#define MCF5282_QSPI_QCR_CS (((x)&0x000F)<<8)
+
+/****************************************************************************/
+#endif /* m528xsim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m5307sim.h -- ColdFire 5307 System Integration Module support.
+ *
+ * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd.
+ * (C) Copyright 1999, Lineo (www.lineo.com)
+ *
+ * Modified by David W. Miller for the MCF5307 Eval Board.
+ */
+
+/****************************************************************************/
+#ifndef m5307sim_h
+#define m5307sim_h
+/****************************************************************************/
+
+/*
+ * Define the 5307 SIM register set addresses.
+ */
+#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */
+#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/
+#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */
+#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */
+#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */
+#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */
+#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/
+#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/
+#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */
+#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */
+#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */
+#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */
+#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */
+#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */
+#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */
+#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */
+#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */
+#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */
+#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */
+#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */
+#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */
+#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */
+#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
+
+#ifdef CONFIG_OLDMASK
+#define MCFSIM_CSBAR 0x98 /* CS Base Address reg (r/w) */
+#define MCFSIM_CSBAMR 0x9c /* CS Base Mask reg (r/w) */
+#define MCFSIM_CSMR2 0x9e /* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
+#define MCFSIM_CSMR3 0xaa /* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
+#define MCFSIM_CSMR4 0xb6 /* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
+#define MCFSIM_CSMR5 0xc2 /* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */
+#define MCFSIM_CSMR6 0xce /* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */
+#define MCFSIM_CSMR7 0xda /* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
+#else
+#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */
+#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
+#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */
+#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */
+#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */
+#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */
+#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */
+#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
+#endif /* CONFIG_OLDMASK */
+
+#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
+
+#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */
+#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */
+
+
+/* Definition offset address for CS2-7 -- old mask 5307 */
+
+#define MCF5307_CS2 (0x400000)
+#define MCF5307_CS3 (0x600000)
+#define MCF5307_CS4 (0x800000)
+#define MCF5307_CS5 (0xA00000)
+#define MCF5307_CS6 (0xC00000)
+#define MCF5307_CS7 (0xE00000)
+
+
+/*
+ * Some symbol defines for the above...
+ */
+#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
+#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
+#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
+#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
+#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
+#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
+#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
+#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
+#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
+
+#if defined(CONFIG_M5307)
+#define MCFSIM_IMR_MASKALL 0x3fffe /* All SIM intr sources */
+#endif
+
+/*
+ * Macro to set IMR register. It is 32 bits on the 5307.
+ */
+#define mcf_getimr() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define mcf_setimr(imr) \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define mcf_getipr() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+
+/*
+ * Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */
+ /* Clear to select par I/O */
+#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */
+ /* Clear to select par I/O */
+
+/*
+ * Defines for the IRQPAR Register
+ */
+#define IRQ5_LEVEL4 0x80
+#define IRQ3_LEVEL6 0x40
+#define IRQ1_LEVEL2 0x20
+
+
+/*
+ * Define the Cache register flags.
+ */
+#define CACR_EC (1<<31)
+#define CACR_ESB (1<<29)
+#define CACR_DPI (1<<28)
+#define CACR_HLCK (1<<27)
+#define CACR_CINVA (1<<24)
+#define CACR_DNFB (1<<10)
+#define CACR_DCM_WTHRU (0<<8)
+#define CACR_DCM_WBACK (1<<8)
+#define CACR_DCM_OFF_PRE (2<<8)
+#define CACR_DCM_OFF_IMP (3<<8)
+#define CACR_DW (1<<5)
+
+#define ACR_BASE_POS 24
+#define ACR_MASK_POS 16
+#define ACR_ENABLE (1<<15)
+#define ACR_USER (0<<13)
+#define ACR_SUPER (1<<13)
+#define ACR_ANY (2<<13)
+#define ACR_CM_WTHRU (0<<5)
+#define ACR_CM_WBACK (1<<5)
+#define ACR_CM_OFF_PRE (2<<5)
+#define ACR_CM_OFF_IMP (3<<5)
+#define ACR_WPROTECT (1<<2)
+
+/****************************************************************************/
+#endif /* m5307sim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m532xsim.h -- ColdFire 5329 registers
+ */
+
+/****************************************************************************/
+#ifndef m532xsim_h
+#define m532xsim_h
+/****************************************************************************/
+
+#define MCF_REG32(x) (*(volatile unsigned long *)(x))
+#define MCF_REG16(x) (*(volatile unsigned short *)(x))
+#define MCF_REG08(x) (*(volatile unsigned char *)(x))
+
+#define MCFINT_VECBASE 64
+#define MCFINT_UART0 26 /* Interrupt number for UART0 */
+#define MCFINT_UART1 27 /* Interrupt number for UART1 */
+
+#define MCF_WTM_WCR MCF_REG16(0xFC098000)
+
+/*
+ * Define the 532x SIM register set addresses.
+ */
+#define MCFSIM_IPRL 0xFC048004
+#define MCFSIM_IPRH 0xFC048000
+#define MCFSIM_IPR MCFSIM_IPRL
+#define MCFSIM_IMRL 0xFC04800C
+#define MCFSIM_IMRH 0xFC048008
+#define MCFSIM_IMR MCFSIM_IMRL
+#define MCFSIM_ICR0 0xFC048040
+#define MCFSIM_ICR1 0xFC048041
+#define MCFSIM_ICR2 0xFC048042
+#define MCFSIM_ICR3 0xFC048043
+#define MCFSIM_ICR4 0xFC048044
+#define MCFSIM_ICR5 0xFC048045
+#define MCFSIM_ICR6 0xFC048046
+#define MCFSIM_ICR7 0xFC048047
+#define MCFSIM_ICR8 0xFC048048
+#define MCFSIM_ICR9 0xFC048049
+#define MCFSIM_ICR10 0xFC04804A
+#define MCFSIM_ICR11 0xFC04804B
+
+/*
+ * Some symbol defines for the above...
+ */
+#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
+#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
+#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
+#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
+#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
+#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
+#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
+#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
+#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
+
+
+#define MCFSIM_IMR_MASKALL 0xFFFFFFFF /* All SIM intr sources */
+
+#define MCFSIM_IMR_SIMR0 0xFC04801C
+#define MCFSIM_IMR_SIMR1 0xFC04C01C
+#define MCFSIM_IMR_CIMR0 0xFC04801D
+#define MCFSIM_IMR_CIMR1 0xFC04C01D
+
+#define MCFSIM_ICR_TIMER1 (0xFC048040+32)
+#define MCFSIM_ICR_TIMER2 (0xFC048040+33)
+
+
+/*
+ * Macro to set IMR register. It is 32 bits on the 5307.
+ */
+#define mcf_getimr() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define mcf_setimr(imr) \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define mcf_getipr() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+#define mcf_getiprl() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL))
+
+#define mcf_getiprh() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH))
+
+
+#define mcf_enable_irq0(irq) \
+ *((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq);
+
+#define mcf_enable_irq1(irq) \
+ *((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq);
+
+#define mcf_disable_irq0(irq) \
+ *((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq);
+
+#define mcf_disable_irq1(irq) \
+ *((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq);
+
+/*
+ * Define the Cache register flags.
+ */
+#define CACR_EC (1<<31)
+#define CACR_ESB (1<<29)
+#define CACR_DPI (1<<28)
+#define CACR_HLCK (1<<27)
+#define CACR_CINVA (1<<24)
+#define CACR_DNFB (1<<10)
+#define CACR_DCM_WTHRU (0<<8)
+#define CACR_DCM_WBACK (1<<8)
+#define CACR_DCM_OFF_PRE (2<<8)
+#define CACR_DCM_OFF_IMP (3<<8)
+#define CACR_DW (1<<5)
+
+#define ACR_BASE_POS 24
+#define ACR_MASK_POS 16
+#define ACR_ENABLE (1<<15)
+#define ACR_USER (0<<13)
+#define ACR_SUPER (1<<13)
+#define ACR_ANY (2<<13)
+#define ACR_CM_WTHRU (0<<5)
+#define ACR_CM_WBACK (1<<5)
+#define ACR_CM_OFF_PRE (2<<5)
+#define ACR_CM_OFF_IMP (3<<5)
+#define ACR_WPROTECT (1<<2)
+
+/*********************************************************************
+ *
+ * Inter-IC (I2C) Module
+ *
+ *********************************************************************/
+
+/* Read/Write access macros for general use */
+#define MCF532x_I2C_I2ADR (volatile u8 *) (0xFC058000) // Address
+#define MCF532x_I2C_I2FDR (volatile u8 *) (0xFC058004) // Freq Divider
+#define MCF532x_I2C_I2CR (volatile u8 *) (0xFC058008) // Control
+#define MCF532x_I2C_I2SR (volatile u8 *) (0xFC05800C) // Status
+#define MCF532x_I2C_I2DR (volatile u8 *) (0xFC058010) // Data I/O
+
+/* Bit level definitions and macros */
+#define MCF532x_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01)
+
+#define MCF532x_I2C_I2FDR_IC(x) (((x)&0x3F))
+
+#define MCF532x_I2C_I2CR_IEN (0x80) // I2C enable
+#define MCF532x_I2C_I2CR_IIEN (0x40) // interrupt enable
+#define MCF532x_I2C_I2CR_MSTA (0x20) // master/slave mode
+#define MCF532x_I2C_I2CR_MTX (0x10) // transmit/receive mode
+#define MCF532x_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable
+#define MCF532x_I2C_I2CR_RSTA (0x04) // repeat start
+
+#define MCF532x_I2C_I2SR_ICF (0x80) // data transfer bit
+#define MCF532x_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave
+#define MCF532x_I2C_I2SR_IBB (0x20) // I2C bus busy
+#define MCF532x_I2C_I2SR_IAL (0x10) // aribitration lost
+#define MCF532x_I2C_I2SR_SRW (0x04) // slave read/write
+#define MCF532x_I2C_I2SR_IIF (0x02) // I2C interrupt
+#define MCF532x_I2C_I2SR_RXAK (0x01) // received acknowledge
+
+#define MCF532x_PAR_FECI2C (volatile u8 *) (0xFC0A4053)
+
+
+/*
+ * The M5329EVB board needs a help getting its devices initialized
+ * at kernel start time if dBUG doesn't set it up (for example
+ * it is not used), so we need to do it manually.
+ */
+#ifdef __ASSEMBLER__
+.macro m5329EVB_setup
+ movel #0xFC098000, %a7
+ movel #0x0, (%a7)
+#define CORE_SRAM 0x80000000
+#define CORE_SRAM_SIZE 0x8000
+ movel #CORE_SRAM, %d0
+ addl #0x221, %d0
+ movec %d0,%RAMBAR1
+ movel #CORE_SRAM, %sp
+ addl #CORE_SRAM_SIZE, %sp
+ jsr sysinit
+.endm
+#define PLATFORM_SETUP m5329EVB_setup
+
+#endif /* __ASSEMBLER__ */
+
+/*********************************************************************
+ *
+ * Chip Configuration Module (CCM)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_CCM_CCR MCF_REG16(0xFC0A0004)
+#define MCF_CCM_RCON MCF_REG16(0xFC0A0008)
+#define MCF_CCM_CIR MCF_REG16(0xFC0A000A)
+#define MCF_CCM_MISCCR MCF_REG16(0xFC0A0010)
+#define MCF_CCM_CDR MCF_REG16(0xFC0A0012)
+#define MCF_CCM_UHCSR MCF_REG16(0xFC0A0014)
+#define MCF_CCM_UOCSR MCF_REG16(0xFC0A0016)
+
+/* Bit definitions and macros for MCF_CCM_CCR */
+#define MCF_CCM_CCR_RESERVED (0x0001)
+#define MCF_CCM_CCR_PLL_MODE (0x0003)
+#define MCF_CCM_CCR_OSC_MODE (0x0005)
+#define MCF_CCM_CCR_BOOTPS(x) (((x)&0x0003)<<3|0x0001)
+#define MCF_CCM_CCR_LOAD (0x0021)
+#define MCF_CCM_CCR_LIMP (0x0041)
+#define MCF_CCM_CCR_CSC(x) (((x)&0x0003)<<8|0x0001)
+
+/* Bit definitions and macros for MCF_CCM_RCON */
+#define MCF_CCM_RCON_RESERVED (0x0001)
+#define MCF_CCM_RCON_PLL_MODE (0x0003)
+#define MCF_CCM_RCON_OSC_MODE (0x0005)
+#define MCF_CCM_RCON_BOOTPS(x) (((x)&0x0003)<<3|0x0001)
+#define MCF_CCM_RCON_LOAD (0x0021)
+#define MCF_CCM_RCON_LIMP (0x0041)
+#define MCF_CCM_RCON_CSC(x) (((x)&0x0003)<<8|0x0001)
+
+/* Bit definitions and macros for MCF_CCM_CIR */
+#define MCF_CCM_CIR_PRN(x) (((x)&0x003F)<<0)
+#define MCF_CCM_CIR_PIN(x) (((x)&0x03FF)<<6)
+
+/* Bit definitions and macros for MCF_CCM_MISCCR */
+#define MCF_CCM_MISCCR_USBSRC (0x0001)
+#define MCF_CCM_MISCCR_USBDIV (0x0002)
+#define MCF_CCM_MISCCR_SSI_SRC (0x0010)
+#define MCF_CCM_MISCCR_TIM_DMA (0x0020)
+#define MCF_CCM_MISCCR_SSI_PUS (0x0040)
+#define MCF_CCM_MISCCR_SSI_PUE (0x0080)
+#define MCF_CCM_MISCCR_LCD_CHEN (0x0100)
+#define MCF_CCM_MISCCR_LIMP (0x1000)
+#define MCF_CCM_MISCCR_PLL_LOCK (0x2000)
+
+/* Bit definitions and macros for MCF_CCM_CDR */
+#define MCF_CCM_CDR_SSIDIV(x) (((x)&0x000F)<<0)
+#define MCF_CCM_CDR_LPDIV(x) (((x)&0x000F)<<8)
+
+/* Bit definitions and macros for MCF_CCM_UHCSR */
+#define MCF_CCM_UHCSR_XPDE (0x0001)
+#define MCF_CCM_UHCSR_UHMIE (0x0002)
+#define MCF_CCM_UHCSR_WKUP (0x0004)
+#define MCF_CCM_UHCSR_PORTIND(x) (((x)&0x0003)<<14)
+
+/* Bit definitions and macros for MCF_CCM_UOCSR */
+#define MCF_CCM_UOCSR_XPDE (0x0001)
+#define MCF_CCM_UOCSR_UOMIE (0x0002)
+#define MCF_CCM_UOCSR_WKUP (0x0004)
+#define MCF_CCM_UOCSR_PWRFLT (0x0008)
+#define MCF_CCM_UOCSR_SEND (0x0010)
+#define MCF_CCM_UOCSR_VVLD (0x0020)
+#define MCF_CCM_UOCSR_BVLD (0x0040)
+#define MCF_CCM_UOCSR_AVLD (0x0080)
+#define MCF_CCM_UOCSR_DPPU (0x0100)
+#define MCF_CCM_UOCSR_DCR_VBUS (0x0200)
+#define MCF_CCM_UOCSR_CRG_VBUS (0x0400)
+#define MCF_CCM_UOCSR_DRV_VBUS (0x0800)
+#define MCF_CCM_UOCSR_DMPD (0x1000)
+#define MCF_CCM_UOCSR_DPPD (0x2000)
+#define MCF_CCM_UOCSR_PORTIND(x) (((x)&0x0003)<<14)
+
+/*********************************************************************
+ *
+ * DMA Timers (DTIM)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_DTIM0_DTMR MCF_REG16(0xFC070000)
+#define MCF_DTIM0_DTXMR MCF_REG08(0xFC070002)
+#define MCF_DTIM0_DTER MCF_REG08(0xFC070003)
+#define MCF_DTIM0_DTRR MCF_REG32(0xFC070004)
+#define MCF_DTIM0_DTCR MCF_REG32(0xFC070008)
+#define MCF_DTIM0_DTCN MCF_REG32(0xFC07000C)
+#define MCF_DTIM1_DTMR MCF_REG16(0xFC074000)
+#define MCF_DTIM1_DTXMR MCF_REG08(0xFC074002)
+#define MCF_DTIM1_DTER MCF_REG08(0xFC074003)
+#define MCF_DTIM1_DTRR MCF_REG32(0xFC074004)
+#define MCF_DTIM1_DTCR MCF_REG32(0xFC074008)
+#define MCF_DTIM1_DTCN MCF_REG32(0xFC07400C)
+#define MCF_DTIM2_DTMR MCF_REG16(0xFC078000)
+#define MCF_DTIM2_DTXMR MCF_REG08(0xFC078002)
+#define MCF_DTIM2_DTER MCF_REG08(0xFC078003)
+#define MCF_DTIM2_DTRR MCF_REG32(0xFC078004)
+#define MCF_DTIM2_DTCR MCF_REG32(0xFC078008)
+#define MCF_DTIM2_DTCN MCF_REG32(0xFC07800C)
+#define MCF_DTIM3_DTMR MCF_REG16(0xFC07C000)
+#define MCF_DTIM3_DTXMR MCF_REG08(0xFC07C002)
+#define MCF_DTIM3_DTER MCF_REG08(0xFC07C003)
+#define MCF_DTIM3_DTRR MCF_REG32(0xFC07C004)
+#define MCF_DTIM3_DTCR MCF_REG32(0xFC07C008)
+#define MCF_DTIM3_DTCN MCF_REG32(0xFC07C00C)
+#define MCF_DTIM_DTMR(x) MCF_REG16(0xFC070000+((x)*0x4000))
+#define MCF_DTIM_DTXMR(x) MCF_REG08(0xFC070002+((x)*0x4000))
+#define MCF_DTIM_DTER(x) MCF_REG08(0xFC070003+((x)*0x4000))
+#define MCF_DTIM_DTRR(x) MCF_REG32(0xFC070004+((x)*0x4000))
+#define MCF_DTIM_DTCR(x) MCF_REG32(0xFC070008+((x)*0x4000))
+#define MCF_DTIM_DTCN(x) MCF_REG32(0xFC07000C+((x)*0x4000))
+
+/* Bit definitions and macros for MCF_DTIM_DTMR */
+#define MCF_DTIM_DTMR_RST (0x0001)
+#define MCF_DTIM_DTMR_CLK(x) (((x)&0x0003)<<1)
+#define MCF_DTIM_DTMR_FRR (0x0008)
+#define MCF_DTIM_DTMR_ORRI (0x0010)
+#define MCF_DTIM_DTMR_OM (0x0020)
+#define MCF_DTIM_DTMR_CE(x) (((x)&0x0003)<<6)
+#define MCF_DTIM_DTMR_PS(x) (((x)&0x00FF)<<8)
+#define MCF_DTIM_DTMR_CE_ANY (0x00C0)
+#define MCF_DTIM_DTMR_CE_FALL (0x0080)
+#define MCF_DTIM_DTMR_CE_RISE (0x0040)
+#define MCF_DTIM_DTMR_CE_NONE (0x0000)
+#define MCF_DTIM_DTMR_CLK_DTIN (0x0006)
+#define MCF_DTIM_DTMR_CLK_DIV16 (0x0004)
+#define MCF_DTIM_DTMR_CLK_DIV1 (0x0002)
+#define MCF_DTIM_DTMR_CLK_STOP (0x0000)
+
+/* Bit definitions and macros for MCF_DTIM_DTXMR */
+#define MCF_DTIM_DTXMR_MODE16 (0x01)
+#define MCF_DTIM_DTXMR_DMAEN (0x80)
+
+/* Bit definitions and macros for MCF_DTIM_DTER */
+#define MCF_DTIM_DTER_CAP (0x01)
+#define MCF_DTIM_DTER_REF (0x02)
+
+/* Bit definitions and macros for MCF_DTIM_DTRR */
+#define MCF_DTIM_DTRR_REF(x) (((x)&0xFFFFFFFF)<<0)
+
+/* Bit definitions and macros for MCF_DTIM_DTCR */
+#define MCF_DTIM_DTCR_CAP(x) (((x)&0xFFFFFFFF)<<0)
+
+/* Bit definitions and macros for MCF_DTIM_DTCN */
+#define MCF_DTIM_DTCN_CNT(x) (((x)&0xFFFFFFFF)<<0)
+
+/*********************************************************************
+ *
+ * FlexBus Chip Selects (FBCS)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_FBCS0_CSAR MCF_REG32(0xFC008000)
+#define MCF_FBCS0_CSMR MCF_REG32(0xFC008004)
+#define MCF_FBCS0_CSCR MCF_REG32(0xFC008008)
+#define MCF_FBCS1_CSAR MCF_REG32(0xFC00800C)
+#define MCF_FBCS1_CSMR MCF_REG32(0xFC008010)
+#define MCF_FBCS1_CSCR MCF_REG32(0xFC008014)
+#define MCF_FBCS2_CSAR MCF_REG32(0xFC008018)
+#define MCF_FBCS2_CSMR MCF_REG32(0xFC00801C)
+#define MCF_FBCS2_CSCR MCF_REG32(0xFC008020)
+#define MCF_FBCS3_CSAR MCF_REG32(0xFC008024)
+#define MCF_FBCS3_CSMR MCF_REG32(0xFC008028)
+#define MCF_FBCS3_CSCR MCF_REG32(0xFC00802C)
+#define MCF_FBCS4_CSAR MCF_REG32(0xFC008030)
+#define MCF_FBCS4_CSMR MCF_REG32(0xFC008034)
+#define MCF_FBCS4_CSCR MCF_REG32(0xFC008038)
+#define MCF_FBCS5_CSAR MCF_REG32(0xFC00803C)
+#define MCF_FBCS5_CSMR MCF_REG32(0xFC008040)
+#define MCF_FBCS5_CSCR MCF_REG32(0xFC008044)
+#define MCF_FBCS_CSAR(x) MCF_REG32(0xFC008000+((x)*0x00C))
+#define MCF_FBCS_CSMR(x) MCF_REG32(0xFC008004+((x)*0x00C))
+#define MCF_FBCS_CSCR(x) MCF_REG32(0xFC008008+((x)*0x00C))
+
+/* Bit definitions and macros for MCF_FBCS_CSAR */
+#define MCF_FBCS_CSAR_BA(x) ((x)&0xFFFF0000)
+
+/* Bit definitions and macros for MCF_FBCS_CSMR */
+#define MCF_FBCS_CSMR_V (0x00000001)
+#define MCF_FBCS_CSMR_WP (0x00000100)
+#define MCF_FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16)
+#define MCF_FBCS_CSMR_BAM_4G (0xFFFF0000)
+#define MCF_FBCS_CSMR_BAM_2G (0x7FFF0000)
+#define MCF_FBCS_CSMR_BAM_1G (0x3FFF0000)
+#define MCF_FBCS_CSMR_BAM_1024M (0x3FFF0000)
+#define MCF_FBCS_CSMR_BAM_512M (0x1FFF0000)
+#define MCF_FBCS_CSMR_BAM_256M (0x0FFF0000)
+#define MCF_FBCS_CSMR_BAM_128M (0x07FF0000)
+#define MCF_FBCS_CSMR_BAM_64M (0x03FF0000)
+#define MCF_FBCS_CSMR_BAM_32M (0x01FF0000)
+#define MCF_FBCS_CSMR_BAM_16M (0x00FF0000)
+#define MCF_FBCS_CSMR_BAM_8M (0x007F0000)
+#define MCF_FBCS_CSMR_BAM_4M (0x003F0000)
+#define MCF_FBCS_CSMR_BAM_2M (0x001F0000)
+#define MCF_FBCS_CSMR_BAM_1M (0x000F0000)
+#define MCF_FBCS_CSMR_BAM_1024K (0x000F0000)
+#define MCF_FBCS_CSMR_BAM_512K (0x00070000)
+#define MCF_FBCS_CSMR_BAM_256K (0x00030000)
+#define MCF_FBCS_CSMR_BAM_128K (0x00010000)
+#define MCF_FBCS_CSMR_BAM_64K (0x00000000)
+
+/* Bit definitions and macros for MCF_FBCS_CSCR */
+#define MCF_FBCS_CSCR_BSTW (0x00000008)
+#define MCF_FBCS_CSCR_BSTR (0x00000010)
+#define MCF_FBCS_CSCR_BEM (0x00000020)
+#define MCF_FBCS_CSCR_PS(x) (((x)&0x00000003)<<6)
+#define MCF_FBCS_CSCR_AA (0x00000100)
+#define MCF_FBCS_CSCR_SBM (0x00000200)
+#define MCF_FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10)
+#define MCF_FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16)
+#define MCF_FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18)
+#define MCF_FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20)
+#define MCF_FBCS_CSCR_SWSEN (0x00800000)
+#define MCF_FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26)
+#define MCF_FBCS_CSCR_PS_8 (0x0040)
+#define MCF_FBCS_CSCR_PS_16 (0x0080)
+#define MCF_FBCS_CSCR_PS_32 (0x0000)
+
+/*********************************************************************
+ *
+ * General Purpose I/O (GPIO)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_GPIO_PODR_FECH MCF_REG08(0xFC0A4000)
+#define MCF_GPIO_PODR_FECL MCF_REG08(0xFC0A4001)
+#define MCF_GPIO_PODR_SSI MCF_REG08(0xFC0A4002)
+#define MCF_GPIO_PODR_BUSCTL MCF_REG08(0xFC0A4003)
+#define MCF_GPIO_PODR_BE MCF_REG08(0xFC0A4004)
+#define MCF_GPIO_PODR_CS MCF_REG08(0xFC0A4005)
+#define MCF_GPIO_PODR_PWM MCF_REG08(0xFC0A4006)
+#define MCF_GPIO_PODR_FECI2C MCF_REG08(0xFC0A4007)
+#define MCF_GPIO_PODR_UART MCF_REG08(0xFC0A4009)
+#define MCF_GPIO_PODR_QSPI MCF_REG08(0xFC0A400A)
+#define MCF_GPIO_PODR_TIMER MCF_REG08(0xFC0A400B)
+#define MCF_GPIO_PODR_LCDDATAH MCF_REG08(0xFC0A400D)
+#define MCF_GPIO_PODR_LCDDATAM MCF_REG08(0xFC0A400E)
+#define MCF_GPIO_PODR_LCDDATAL MCF_REG08(0xFC0A400F)
+#define MCF_GPIO_PODR_LCDCTLH MCF_REG08(0xFC0A4010)
+#define MCF_GPIO_PODR_LCDCTLL MCF_REG08(0xFC0A4011)
+#define MCF_GPIO_PDDR_FECH MCF_REG08(0xFC0A4014)
+#define MCF_GPIO_PDDR_FECL MCF_REG08(0xFC0A4015)
+#define MCF_GPIO_PDDR_SSI MCF_REG08(0xFC0A4016)
+#define MCF_GPIO_PDDR_BUSCTL MCF_REG08(0xFC0A4017)
+#define MCF_GPIO_PDDR_BE MCF_REG08(0xFC0A4018)
+#define MCF_GPIO_PDDR_CS MCF_REG08(0xFC0A4019)
+#define MCF_GPIO_PDDR_PWM MCF_REG08(0xFC0A401A)
+#define MCF_GPIO_PDDR_FECI2C MCF_REG08(0xFC0A401B)
+#define MCF_GPIO_PDDR_UART MCF_REG08(0xFC0A401C)
+#define MCF_GPIO_PDDR_QSPI MCF_REG08(0xFC0A401E)
+#define MCF_GPIO_PDDR_TIMER MCF_REG08(0xFC0A401F)
+#define MCF_GPIO_PDDR_LCDDATAH MCF_REG08(0xFC0A4021)
+#define MCF_GPIO_PDDR_LCDDATAM MCF_REG08(0xFC0A4022)
+#define MCF_GPIO_PDDR_LCDDATAL MCF_REG08(0xFC0A4023)
+#define MCF_GPIO_PDDR_LCDCTLH MCF_REG08(0xFC0A4024)
+#define MCF_GPIO_PDDR_LCDCTLL MCF_REG08(0xFC0A4025)
+#define MCF_GPIO_PPDSDR_FECH MCF_REG08(0xFC0A4028)
+#define MCF_GPIO_PPDSDR_FECL MCF_REG08(0xFC0A4029)
+#define MCF_GPIO_PPDSDR_SSI MCF_REG08(0xFC0A402A)
+#define MCF_GPIO_PPDSDR_BUSCTL MCF_REG08(0xFC0A402B)
+#define MCF_GPIO_PPDSDR_BE MCF_REG08(0xFC0A402C)
+#define MCF_GPIO_PPDSDR_CS MCF_REG08(0xFC0A402D)
+#define MCF_GPIO_PPDSDR_PWM MCF_REG08(0xFC0A402E)
+#define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0xFC0A402F)
+#define MCF_GPIO_PPDSDR_UART MCF_REG08(0xFC0A4031)
+#define MCF_GPIO_PPDSDR_QSPI MCF_REG08(0xFC0A4032)
+#define MCF_GPIO_PPDSDR_TIMER MCF_REG08(0xFC0A4033)
+#define MCF_GPIO_PPDSDR_LCDDATAH MCF_REG08(0xFC0A4035)
+#define MCF_GPIO_PPDSDR_LCDDATAM MCF_REG08(0xFC0A4036)
+#define MCF_GPIO_PPDSDR_LCDDATAL MCF_REG08(0xFC0A4037)
+#define MCF_GPIO_PPDSDR_LCDCTLH MCF_REG08(0xFC0A4038)
+#define MCF_GPIO_PPDSDR_LCDCTLL MCF_REG08(0xFC0A4039)
+#define MCF_GPIO_PCLRR_FECH MCF_REG08(0xFC0A403C)
+#define MCF_GPIO_PCLRR_FECL MCF_REG08(0xFC0A403D)
+#define MCF_GPIO_PCLRR_SSI MCF_REG08(0xFC0A403E)
+#define MCF_GPIO_PCLRR_BUSCTL MCF_REG08(0xFC0A403F)
+#define MCF_GPIO_PCLRR_BE MCF_REG08(0xFC0A4040)
+#define MCF_GPIO_PCLRR_CS MCF_REG08(0xFC0A4041)
+#define MCF_GPIO_PCLRR_PWM MCF_REG08(0xFC0A4042)
+#define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0xFC0A4043)
+#define MCF_GPIO_PCLRR_UART MCF_REG08(0xFC0A4045)
+#define MCF_GPIO_PCLRR_QSPI MCF_REG08(0xFC0A4046)
+#define MCF_GPIO_PCLRR_TIMER MCF_REG08(0xFC0A4047)
+#define MCF_GPIO_PCLRR_LCDDATAH MCF_REG08(0xFC0A4049)
+#define MCF_GPIO_PCLRR_LCDDATAM MCF_REG08(0xFC0A404A)
+#define MCF_GPIO_PCLRR_LCDDATAL MCF_REG08(0xFC0A404B)
+#define MCF_GPIO_PCLRR_LCDCTLH MCF_REG08(0xFC0A404C)
+#define MCF_GPIO_PCLRR_LCDCTLL MCF_REG08(0xFC0A404D)
+#define MCF_GPIO_PAR_FEC MCF_REG08(0xFC0A4050)
+#define MCF_GPIO_PAR_PWM MCF_REG08(0xFC0A4051)
+#define MCF_GPIO_PAR_BUSCTL MCF_REG08(0xFC0A4052)
+#define MCF_GPIO_PAR_FECI2C MCF_REG08(0xFC0A4053)
+#define MCF_GPIO_PAR_BE MCF_REG08(0xFC0A4054)
+#define MCF_GPIO_PAR_CS MCF_REG08(0xFC0A4055)
+#define MCF_GPIO_PAR_SSI MCF_REG16(0xFC0A4056)
+#define MCF_GPIO_PAR_UART MCF_REG16(0xFC0A4058)
+#define MCF_GPIO_PAR_QSPI MCF_REG16(0xFC0A405A)
+#define MCF_GPIO_PAR_TIMER MCF_REG08(0xFC0A405C)
+#define MCF_GPIO_PAR_LCDDATA MCF_REG08(0xFC0A405D)
+#define MCF_GPIO_PAR_LCDCTL MCF_REG16(0xFC0A405E)
+#define MCF_GPIO_PAR_IRQ MCF_REG16(0xFC0A4060)
+#define MCF_GPIO_MSCR_FLEXBUS MCF_REG08(0xFC0A4064)
+#define MCF_GPIO_MSCR_SDRAM MCF_REG08(0xFC0A4065)
+#define MCF_GPIO_DSCR_I2C MCF_REG08(0xFC0A4068)
+#define MCF_GPIO_DSCR_PWM MCF_REG08(0xFC0A4069)
+#define MCF_GPIO_DSCR_FEC MCF_REG08(0xFC0A406A)
+#define MCF_GPIO_DSCR_UART MCF_REG08(0xFC0A406B)
+#define MCF_GPIO_DSCR_QSPI MCF_REG08(0xFC0A406C)
+#define MCF_GPIO_DSCR_TIMER MCF_REG08(0xFC0A406D)
+#define MCF_GPIO_DSCR_SSI MCF_REG08(0xFC0A406E)
+#define MCF_GPIO_DSCR_LCD MCF_REG08(0xFC0A406F)
+#define MCF_GPIO_DSCR_DEBUG MCF_REG08(0xFC0A4070)
+#define MCF_GPIO_DSCR_CLKRST MCF_REG08(0xFC0A4071)
+#define MCF_GPIO_DSCR_IRQ MCF_REG08(0xFC0A4072)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_FECH */
+#define MCF_GPIO_PODR_FECH_PODR_FECH0 (0x01)
+#define MCF_GPIO_PODR_FECH_PODR_FECH1 (0x02)
+#define MCF_GPIO_PODR_FECH_PODR_FECH2 (0x04)
+#define MCF_GPIO_PODR_FECH_PODR_FECH3 (0x08)
+#define MCF_GPIO_PODR_FECH_PODR_FECH4 (0x10)
+#define MCF_GPIO_PODR_FECH_PODR_FECH5 (0x20)
+#define MCF_GPIO_PODR_FECH_PODR_FECH6 (0x40)
+#define MCF_GPIO_PODR_FECH_PODR_FECH7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_FECL */
+#define MCF_GPIO_PODR_FECL_PODR_FECL0 (0x01)
+#define MCF_GPIO_PODR_FECL_PODR_FECL1 (0x02)
+#define MCF_GPIO_PODR_FECL_PODR_FECL2 (0x04)
+#define MCF_GPIO_PODR_FECL_PODR_FECL3 (0x08)
+#define MCF_GPIO_PODR_FECL_PODR_FECL4 (0x10)
+#define MCF_GPIO_PODR_FECL_PODR_FECL5 (0x20)
+#define MCF_GPIO_PODR_FECL_PODR_FECL6 (0x40)
+#define MCF_GPIO_PODR_FECL_PODR_FECL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_SSI */
+#define MCF_GPIO_PODR_SSI_PODR_SSI0 (0x01)
+#define MCF_GPIO_PODR_SSI_PODR_SSI1 (0x02)
+#define MCF_GPIO_PODR_SSI_PODR_SSI2 (0x04)
+#define MCF_GPIO_PODR_SSI_PODR_SSI3 (0x08)
+#define MCF_GPIO_PODR_SSI_PODR_SSI4 (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_BUSCTL */
+#define MCF_GPIO_PODR_BUSCTL_POSDR_BUSCTL0 (0x01)
+#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL1 (0x02)
+#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL2 (0x04)
+#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_BE */
+#define MCF_GPIO_PODR_BE_PODR_BE0 (0x01)
+#define MCF_GPIO_PODR_BE_PODR_BE1 (0x02)
+#define MCF_GPIO_PODR_BE_PODR_BE2 (0x04)
+#define MCF_GPIO_PODR_BE_PODR_BE3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_CS */
+#define MCF_GPIO_PODR_CS_PODR_CS1 (0x02)
+#define MCF_GPIO_PODR_CS_PODR_CS2 (0x04)
+#define MCF_GPIO_PODR_CS_PODR_CS3 (0x08)
+#define MCF_GPIO_PODR_CS_PODR_CS4 (0x10)
+#define MCF_GPIO_PODR_CS_PODR_CS5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_PWM */
+#define MCF_GPIO_PODR_PWM_PODR_PWM2 (0x04)
+#define MCF_GPIO_PODR_PWM_PODR_PWM3 (0x08)
+#define MCF_GPIO_PODR_PWM_PODR_PWM4 (0x10)
+#define MCF_GPIO_PODR_PWM_PODR_PWM5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C0 (0x01)
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C1 (0x02)
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C2 (0x04)
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_UART */
+#define MCF_GPIO_PODR_UART_PODR_UART0 (0x01)
+#define MCF_GPIO_PODR_UART_PODR_UART1 (0x02)
+#define MCF_GPIO_PODR_UART_PODR_UART2 (0x04)
+#define MCF_GPIO_PODR_UART_PODR_UART3 (0x08)
+#define MCF_GPIO_PODR_UART_PODR_UART4 (0x10)
+#define MCF_GPIO_PODR_UART_PODR_UART5 (0x20)
+#define MCF_GPIO_PODR_UART_PODR_UART6 (0x40)
+#define MCF_GPIO_PODR_UART_PODR_UART7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_QSPI */
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI0 (0x01)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI1 (0x02)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI2 (0x04)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI3 (0x08)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI4 (0x10)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_TIMER */
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER0 (0x01)
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER1 (0x02)
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER2 (0x04)
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAH */
+#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH0 (0x01)
+#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH1 (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAM */
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM0 (0x01)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM1 (0x02)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM2 (0x04)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM3 (0x08)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM4 (0x10)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM5 (0x20)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM6 (0x40)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAL */
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL0 (0x01)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL1 (0x02)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL2 (0x04)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL3 (0x08)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL4 (0x10)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL5 (0x20)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL6 (0x40)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLH */
+#define MCF_GPIO_PODR_LCDCTLH_PODR_LCDCTLH0 (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLL */
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL0 (0x01)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL1 (0x02)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL2 (0x04)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL3 (0x08)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL4 (0x10)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL5 (0x20)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL6 (0x40)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_FECH */
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH0 (0x01)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH1 (0x02)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH2 (0x04)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH3 (0x08)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH4 (0x10)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH5 (0x20)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH6 (0x40)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_FECL */
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL0 (0x01)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL1 (0x02)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL2 (0x04)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL3 (0x08)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL4 (0x10)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL5 (0x20)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL6 (0x40)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_SSI */
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI0 (0x01)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI1 (0x02)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI2 (0x04)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI3 (0x08)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI4 (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_BUSCTL */
+#define MCF_GPIO_PDDR_BUSCTL_POSDR_BUSCTL0 (0x01)
+#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL1 (0x02)
+#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL2 (0x04)
+#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_BE */
+#define MCF_GPIO_PDDR_BE_PDDR_BE0 (0x01)
+#define MCF_GPIO_PDDR_BE_PDDR_BE1 (0x02)
+#define MCF_GPIO_PDDR_BE_PDDR_BE2 (0x04)
+#define MCF_GPIO_PDDR_BE_PDDR_BE3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_CS */
+#define MCF_GPIO_PDDR_CS_PDDR_CS1 (0x02)
+#define MCF_GPIO_PDDR_CS_PDDR_CS2 (0x04)
+#define MCF_GPIO_PDDR_CS_PDDR_CS3 (0x08)
+#define MCF_GPIO_PDDR_CS_PDDR_CS4 (0x10)
+#define MCF_GPIO_PDDR_CS_PDDR_CS5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_PWM */
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM2 (0x04)
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM3 (0x08)
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM4 (0x10)
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C0 (0x01)
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C1 (0x02)
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C2 (0x04)
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_UART */
+#define MCF_GPIO_PDDR_UART_PDDR_UART0 (0x01)
+#define MCF_GPIO_PDDR_UART_PDDR_UART1 (0x02)
+#define MCF_GPIO_PDDR_UART_PDDR_UART2 (0x04)
+#define MCF_GPIO_PDDR_UART_PDDR_UART3 (0x08)
+#define MCF_GPIO_PDDR_UART_PDDR_UART4 (0x10)
+#define MCF_GPIO_PDDR_UART_PDDR_UART5 (0x20)
+#define MCF_GPIO_PDDR_UART_PDDR_UART6 (0x40)
+#define MCF_GPIO_PDDR_UART_PDDR_UART7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_QSPI */
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI0 (0x01)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI1 (0x02)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI2 (0x04)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI3 (0x08)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI4 (0x10)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_TIMER */
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER0 (0x01)
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER1 (0x02)
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER2 (0x04)
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAH */
+#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH0 (0x01)
+#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH1 (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAM */
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM0 (0x01)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM1 (0x02)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM2 (0x04)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM3 (0x08)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM4 (0x10)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM5 (0x20)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM6 (0x40)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAL */
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL0 (0x01)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL1 (0x02)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL2 (0x04)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL3 (0x08)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL4 (0x10)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL5 (0x20)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL6 (0x40)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLH */
+#define MCF_GPIO_PDDR_LCDCTLH_PDDR_LCDCTLH0 (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLL */
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL0 (0x01)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL1 (0x02)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL2 (0x04)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL3 (0x08)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL4 (0x10)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL5 (0x20)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL6 (0x40)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECH */
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH0 (0x01)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH1 (0x02)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH2 (0x04)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH3 (0x08)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH4 (0x10)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH5 (0x20)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH6 (0x40)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECL */
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL0 (0x01)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL1 (0x02)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL2 (0x04)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL3 (0x08)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL4 (0x10)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL5 (0x20)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL6 (0x40)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_SSI */
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI0 (0x01)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI1 (0x02)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI2 (0x04)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI3 (0x08)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI4 (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_BUSCTL */
+#define MCF_GPIO_PPDSDR_BUSCTL_POSDR_BUSCTL0 (0x01)
+#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL1 (0x02)
+#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL2 (0x04)
+#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_BE */
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE0 (0x01)
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE1 (0x02)
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE2 (0x04)
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_CS */
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS1 (0x02)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS2 (0x04)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS3 (0x08)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS4 (0x10)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_PWM */
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM2 (0x04)
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM3 (0x08)
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM4 (0x10)
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C0 (0x01)
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C1 (0x02)
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C2 (0x04)
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_UART */
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART0 (0x01)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART1 (0x02)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART2 (0x04)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART3 (0x08)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART4 (0x10)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART5 (0x20)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART6 (0x40)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_QSPI */
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI0 (0x01)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI1 (0x02)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI2 (0x04)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI3 (0x08)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI4 (0x10)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_TIMER */
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER0 (0x01)
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER1 (0x02)
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER2 (0x04)
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAH */
+#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH0 (0x01)
+#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH1 (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAM */
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM0 (0x01)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM1 (0x02)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM2 (0x04)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM3 (0x08)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM4 (0x10)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM5 (0x20)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM6 (0x40)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAL */
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL0 (0x01)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL1 (0x02)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL2 (0x04)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL3 (0x08)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL4 (0x10)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL5 (0x20)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL6 (0x40)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLH */
+#define MCF_GPIO_PPDSDR_LCDCTLH_PPDSDR_LCDCTLH0 (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLL */
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL0 (0x01)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL1 (0x02)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL2 (0x04)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL3 (0x08)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL4 (0x10)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL5 (0x20)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL6 (0x40)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_FECH */
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH0 (0x01)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH1 (0x02)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH2 (0x04)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH3 (0x08)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH4 (0x10)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH5 (0x20)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH6 (0x40)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_FECL */
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL0 (0x01)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL1 (0x02)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL2 (0x04)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL3 (0x08)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL4 (0x10)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL5 (0x20)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL6 (0x40)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_SSI */
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI0 (0x01)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI1 (0x02)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI2 (0x04)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI3 (0x08)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI4 (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_BUSCTL */
+#define MCF_GPIO_PCLRR_BUSCTL_POSDR_BUSCTL0 (0x01)
+#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL1 (0x02)
+#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL2 (0x04)
+#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_BE */
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE0 (0x01)
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE1 (0x02)
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE2 (0x04)
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_CS */
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS1 (0x02)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS2 (0x04)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS3 (0x08)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS4 (0x10)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_PWM */
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM2 (0x04)
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM3 (0x08)
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM4 (0x10)
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C0 (0x01)
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C1 (0x02)
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C2 (0x04)
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_UART */
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART0 (0x01)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART1 (0x02)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART2 (0x04)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART3 (0x08)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART4 (0x10)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART5 (0x20)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART6 (0x40)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_QSPI */
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI0 (0x01)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI1 (0x02)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI2 (0x04)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI3 (0x08)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI4 (0x10)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI5 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_TIMER */
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER0 (0x01)
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER1 (0x02)
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER2 (0x04)
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAH */
+#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH0 (0x01)
+#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH1 (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAM */
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM0 (0x01)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM1 (0x02)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM2 (0x04)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM3 (0x08)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM4 (0x10)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM5 (0x20)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM6 (0x40)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAL */
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL0 (0x01)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL1 (0x02)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL2 (0x04)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL3 (0x08)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL4 (0x10)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL5 (0x20)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL6 (0x40)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLH */
+#define MCF_GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0 (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLL */
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL0 (0x01)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL1 (0x02)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL2 (0x04)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL3 (0x08)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL4 (0x10)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL5 (0x20)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL6 (0x40)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL7 (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_FEC */
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII(x) (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W(x) (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_GPIO (0x00)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_URTS1 (0x04)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC (0x0C)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_GPIO (0x00)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_UART (0x01)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_PWM */
+#define MCF_GPIO_PAR_PWM_PAR_PWM1(x) (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_PWM_PAR_PWM3(x) (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_PWM_PAR_PWM5 (0x10)
+#define MCF_GPIO_PAR_PWM_PAR_PWM7 (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_BUSCTL */
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS(x) (((x)&0x03)<<3)
+#define MCF_GPIO_PAR_BUSCTL_PAR_RWB (0x20)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TA (0x40)
+#define MCF_GPIO_PAR_BUSCTL_PAR_OE (0x80)
+#define MCF_GPIO_PAR_BUSCTL_PAR_OE_GPIO (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_OE_OE (0x80)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TA_GPIO (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TA_TA (0x40)
+#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_GPIO (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_RWB (0x20)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS_GPIO (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS_DACK0 (0x10)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS_TS (0x18)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_FECI2C */
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x) (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x) (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO(x) (((x)&0x03)<<4)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC(x) (((x)&0x03)<<6)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_GPIO (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_UTXD2 (0x40)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_SCL (0x80)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC (0xC0)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_GPIO (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_URXD2 (0x10)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_SDA (0x20)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO (0x30)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_GPIO (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_SCL (0x0C)
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_GPIO (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02)
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_SDA (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_BE */
+#define MCF_GPIO_PAR_BE_PAR_BE0 (0x01)
+#define MCF_GPIO_PAR_BE_PAR_BE1 (0x02)
+#define MCF_GPIO_PAR_BE_PAR_BE2 (0x04)
+#define MCF_GPIO_PAR_BE_PAR_BE3 (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_CS */
+#define MCF_GPIO_PAR_CS_PAR_CS1 (0x02)
+#define MCF_GPIO_PAR_CS_PAR_CS2 (0x04)
+#define MCF_GPIO_PAR_CS_PAR_CS3 (0x08)
+#define MCF_GPIO_PAR_CS_PAR_CS4 (0x10)
+#define MCF_GPIO_PAR_CS_PAR_CS5 (0x20)
+#define MCF_GPIO_PAR_CS_PAR_CS_CS1_GPIO (0x00)
+#define MCF_GPIO_PAR_CS_PAR_CS_CS1_SDCS1 (0x01)
+#define MCF_GPIO_PAR_CS_PAR_CS_CS1_CS1 (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_SSI */
+#define MCF_GPIO_PAR_SSI_PAR_MCLK (0x0080)
+#define MCF_GPIO_PAR_SSI_PAR_TXD(x) (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_SSI_PAR_RXD(x) (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_SSI_PAR_FS(x) (((x)&0x0003)<<12)
+#define MCF_GPIO_PAR_SSI_PAR_BCLK(x) (((x)&0x0003)<<14)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_UART */
+#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0001)
+#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0002)
+#define MCF_GPIO_PAR_UART_PAR_URTS0 (0x0004)
+#define MCF_GPIO_PAR_UART_PAR_UCTS0 (0x0008)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1(x) (((x)&0x0003)<<4)
+#define MCF_GPIO_PAR_UART_PAR_URXD1(x) (((x)&0x0003)<<6)
+#define MCF_GPIO_PAR_UART_PAR_URTS1(x) (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1(x) (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_GPIO (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_SSI_BCLK (0x0800)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_ULPI_D7 (0x0400)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_UCTS1 (0x0C00)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_GPIO (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_SSI_FS (0x0200)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_ULPI_D6 (0x0100)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_URTS1 (0x0300)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_GPIO (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_SSI_RXD (0x0080)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_ULPI_D5 (0x0040)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_URXD1 (0x00C0)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_GPIO (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_SSI_TXD (0x0020)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_ULPI_D4 (0x0010)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_UTXD1 (0x0030)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_QSPI */
+#define MCF_GPIO_PAR_QSPI_PAR_SCK(x) (((x)&0x0003)<<4)
+#define MCF_GPIO_PAR_QSPI_PAR_DOUT(x) (((x)&0x0003)<<6)
+#define MCF_GPIO_PAR_QSPI_PAR_DIN(x) (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_QSPI_PAR_PCS0(x) (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_QSPI_PAR_PCS1(x) (((x)&0x0003)<<12)
+#define MCF_GPIO_PAR_QSPI_PAR_PCS2(x) (((x)&0x0003)<<14)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0(x) (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1(x) (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x) (((x)&0x03)<<4)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x) (((x)&0x03)<<6)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_GPIO (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TOUT3 (0x80)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_URXD2 (0x40)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN3 (0xC0)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_GPIO (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TOUT2 (0x20)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_UTXD2 (0x10)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN2 (0x30)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_GPIO (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TOUT1 (0x08)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_DACK1 (0x04)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TIN1 (0x0C)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_GPIO (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TOUT0 (0x02)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_DREQ0 (0x01)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TIN0 (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_LCDDATA */
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD7_0(x) (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD15_8(x) (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD16(x) (((x)&0x03)<<4)
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD17(x) (((x)&0x03)<<6)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_LCDCTL */
+#define MCF_GPIO_PAR_LCDCTL_PAR_CLS (0x0001)
+#define MCF_GPIO_PAR_LCDCTL_PAR_PS (0x0002)
+#define MCF_GPIO_PAR_LCDCTL_PAR_REV (0x0004)
+#define MCF_GPIO_PAR_LCDCTL_PAR_SPL_SPR (0x0008)
+#define MCF_GPIO_PAR_LCDCTL_PAR_CONTRAST (0x0010)
+#define MCF_GPIO_PAR_LCDCTL_PAR_LSCLK (0x0020)
+#define MCF_GPIO_PAR_LCDCTL_PAR_LP_HSYNC (0x0040)
+#define MCF_GPIO_PAR_LCDCTL_PAR_FLM_VSYNC (0x0080)
+#define MCF_GPIO_PAR_LCDCTL_PAR_ACD_OE (0x0100)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_IRQ */
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ1(x) (((x)&0x0003)<<4)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ2(x) (((x)&0x0003)<<6)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ4(x) (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ5(x) (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ6(x) (((x)&0x0003)<<12)
+
+/* Bit definitions and macros for MCF_GPIO_MSCR_FLEXBUS */
+#define MCF_GPIO_MSCR_FLEXBUS_MSCR_ADDRCTL(x) (((x)&0x03)<<0)
+#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DLOWER(x) (((x)&0x03)<<2)
+#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DUPPER(x) (((x)&0x03)<<4)
+
+/* Bit definitions and macros for MCF_GPIO_MSCR_SDRAM */
+#define MCF_GPIO_MSCR_SDRAM_MSCR_SDRAM(x) (((x)&0x03)<<0)
+#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLK(x) (((x)&0x03)<<2)
+#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLKB(x) (((x)&0x03)<<4)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_I2C */
+#define MCF_GPIO_DSCR_I2C_I2C_DSE(x) (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_PWM */
+#define MCF_GPIO_DSCR_PWM_PWM_DSE(x) (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_FEC */
+#define MCF_GPIO_DSCR_FEC_FEC_DSE(x) (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_UART */
+#define MCF_GPIO_DSCR_UART_UART0_DSE(x) (((x)&0x03)<<0)
+#define MCF_GPIO_DSCR_UART_UART1_DSE(x) (((x)&0x03)<<2)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_QSPI */
+#define MCF_GPIO_DSCR_QSPI_QSPI_DSE(x) (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_TIMER */
+#define MCF_GPIO_DSCR_TIMER_TIMER_DSE(x) (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_SSI */
+#define MCF_GPIO_DSCR_SSI_SSI_DSE(x) (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_LCD */
+#define MCF_GPIO_DSCR_LCD_LCD_DSE(x) (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_DEBUG */
+#define MCF_GPIO_DSCR_DEBUG_DEBUG_DSE(x) (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_CLKRST */
+#define MCF_GPIO_DSCR_CLKRST_CLKRST_DSE(x) (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */
+#define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x) (((x)&0x03)<<0)
+
+/*********************************************************************
+ *
+ * Interrupt Controller (INTC)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_INTC0_IPRH MCF_REG32(0xFC048000)
+#define MCF_INTC0_IPRL MCF_REG32(0xFC048004)
+#define MCF_INTC0_IMRH MCF_REG32(0xFC048008)
+#define MCF_INTC0_IMRL MCF_REG32(0xFC04800C)
+#define MCF_INTC0_INTFRCH MCF_REG32(0xFC048010)
+#define MCF_INTC0_INTFRCL MCF_REG32(0xFC048014)
+#define MCF_INTC0_ICONFIG MCF_REG16(0xFC04801A)
+#define MCF_INTC0_SIMR MCF_REG08(0xFC04801C)
+#define MCF_INTC0_CIMR MCF_REG08(0xFC04801D)
+#define MCF_INTC0_CLMASK MCF_REG08(0xFC04801E)
+#define MCF_INTC0_SLMASK MCF_REG08(0xFC04801F)
+#define MCF_INTC0_ICR0 MCF_REG08(0xFC048040)
+#define MCF_INTC0_ICR1 MCF_REG08(0xFC048041)
+#define MCF_INTC0_ICR2 MCF_REG08(0xFC048042)
+#define MCF_INTC0_ICR3 MCF_REG08(0xFC048043)
+#define MCF_INTC0_ICR4 MCF_REG08(0xFC048044)
+#define MCF_INTC0_ICR5 MCF_REG08(0xFC048045)
+#define MCF_INTC0_ICR6 MCF_REG08(0xFC048046)
+#define MCF_INTC0_ICR7 MCF_REG08(0xFC048047)
+#define MCF_INTC0_ICR8 MCF_REG08(0xFC048048)
+#define MCF_INTC0_ICR9 MCF_REG08(0xFC048049)
+#define MCF_INTC0_ICR10 MCF_REG08(0xFC04804A)
+#define MCF_INTC0_ICR11 MCF_REG08(0xFC04804B)
+#define MCF_INTC0_ICR12 MCF_REG08(0xFC04804C)
+#define MCF_INTC0_ICR13 MCF_REG08(0xFC04804D)
+#define MCF_INTC0_ICR14 MCF_REG08(0xFC04804E)
+#define MCF_INTC0_ICR15 MCF_REG08(0xFC04804F)
+#define MCF_INTC0_ICR16 MCF_REG08(0xFC048050)
+#define MCF_INTC0_ICR17 MCF_REG08(0xFC048051)
+#define MCF_INTC0_ICR18 MCF_REG08(0xFC048052)
+#define MCF_INTC0_ICR19 MCF_REG08(0xFC048053)
+#define MCF_INTC0_ICR20 MCF_REG08(0xFC048054)
+#define MCF_INTC0_ICR21 MCF_REG08(0xFC048055)
+#define MCF_INTC0_ICR22 MCF_REG08(0xFC048056)
+#define MCF_INTC0_ICR23 MCF_REG08(0xFC048057)
+#define MCF_INTC0_ICR24 MCF_REG08(0xFC048058)
+#define MCF_INTC0_ICR25 MCF_REG08(0xFC048059)
+#define MCF_INTC0_ICR26 MCF_REG08(0xFC04805A)
+#define MCF_INTC0_ICR27 MCF_REG08(0xFC04805B)
+#define MCF_INTC0_ICR28 MCF_REG08(0xFC04805C)
+#define MCF_INTC0_ICR29 MCF_REG08(0xFC04805D)
+#define MCF_INTC0_ICR30 MCF_REG08(0xFC04805E)
+#define MCF_INTC0_ICR31 MCF_REG08(0xFC04805F)
+#define MCF_INTC0_ICR32 MCF_REG08(0xFC048060)
+#define MCF_INTC0_ICR33 MCF_REG08(0xFC048061)
+#define MCF_INTC0_ICR34 MCF_REG08(0xFC048062)
+#define MCF_INTC0_ICR35 MCF_REG08(0xFC048063)
+#define MCF_INTC0_ICR36 MCF_REG08(0xFC048064)
+#define MCF_INTC0_ICR37 MCF_REG08(0xFC048065)
+#define MCF_INTC0_ICR38 MCF_REG08(0xFC048066)
+#define MCF_INTC0_ICR39 MCF_REG08(0xFC048067)
+#define MCF_INTC0_ICR40 MCF_REG08(0xFC048068)
+#define MCF_INTC0_ICR41 MCF_REG08(0xFC048069)
+#define MCF_INTC0_ICR42 MCF_REG08(0xFC04806A)
+#define MCF_INTC0_ICR43 MCF_REG08(0xFC04806B)
+#define MCF_INTC0_ICR44 MCF_REG08(0xFC04806C)
+#define MCF_INTC0_ICR45 MCF_REG08(0xFC04806D)
+#define MCF_INTC0_ICR46 MCF_REG08(0xFC04806E)
+#define MCF_INTC0_ICR47 MCF_REG08(0xFC04806F)
+#define MCF_INTC0_ICR48 MCF_REG08(0xFC048070)
+#define MCF_INTC0_ICR49 MCF_REG08(0xFC048071)
+#define MCF_INTC0_ICR50 MCF_REG08(0xFC048072)
+#define MCF_INTC0_ICR51 MCF_REG08(0xFC048073)
+#define MCF_INTC0_ICR52 MCF_REG08(0xFC048074)
+#define MCF_INTC0_ICR53 MCF_REG08(0xFC048075)
+#define MCF_INTC0_ICR54 MCF_REG08(0xFC048076)
+#define MCF_INTC0_ICR55 MCF_REG08(0xFC048077)
+#define MCF_INTC0_ICR56 MCF_REG08(0xFC048078)
+#define MCF_INTC0_ICR57 MCF_REG08(0xFC048079)
+#define MCF_INTC0_ICR58 MCF_REG08(0xFC04807A)
+#define MCF_INTC0_ICR59 MCF_REG08(0xFC04807B)
+#define MCF_INTC0_ICR60 MCF_REG08(0xFC04807C)
+#define MCF_INTC0_ICR61 MCF_REG08(0xFC04807D)
+#define MCF_INTC0_ICR62 MCF_REG08(0xFC04807E)
+#define MCF_INTC0_ICR63 MCF_REG08(0xFC04807F)
+#define MCF_INTC0_ICR(x) MCF_REG08(0xFC048040+((x)*0x001))
+#define MCF_INTC0_SWIACK MCF_REG08(0xFC0480E0)
+#define MCF_INTC0_L1IACK MCF_REG08(0xFC0480E4)
+#define MCF_INTC0_L2IACK MCF_REG08(0xFC0480E8)
+#define MCF_INTC0_L3IACK MCF_REG08(0xFC0480EC)
+#define MCF_INTC0_L4IACK MCF_REG08(0xFC0480F0)
+#define MCF_INTC0_L5IACK MCF_REG08(0xFC0480F4)
+#define MCF_INTC0_L6IACK MCF_REG08(0xFC0480F8)
+#define MCF_INTC0_L7IACK MCF_REG08(0xFC0480FC)
+#define MCF_INTC0_LIACK(x) MCF_REG08(0xFC0480E4+((x)*0x004))
+#define MCF_INTC1_IPRH MCF_REG32(0xFC04C000)
+#define MCF_INTC1_IPRL MCF_REG32(0xFC04C004)
+#define MCF_INTC1_IMRH MCF_REG32(0xFC04C008)
+#define MCF_INTC1_IMRL MCF_REG32(0xFC04C00C)
+#define MCF_INTC1_INTFRCH MCF_REG32(0xFC04C010)
+#define MCF_INTC1_INTFRCL MCF_REG32(0xFC04C014)
+#define MCF_INTC1_ICONFIG MCF_REG16(0xFC04C01A)
+#define MCF_INTC1_SIMR MCF_REG08(0xFC04C01C)
+#define MCF_INTC1_CIMR MCF_REG08(0xFC04C01D)
+#define MCF_INTC1_CLMASK MCF_REG08(0xFC04C01E)
+#define MCF_INTC1_SLMASK MCF_REG08(0xFC04C01F)
+#define MCF_INTC1_ICR0 MCF_REG08(0xFC04C040)
+#define MCF_INTC1_ICR1 MCF_REG08(0xFC04C041)
+#define MCF_INTC1_ICR2 MCF_REG08(0xFC04C042)
+#define MCF_INTC1_ICR3 MCF_REG08(0xFC04C043)
+#define MCF_INTC1_ICR4 MCF_REG08(0xFC04C044)
+#define MCF_INTC1_ICR5 MCF_REG08(0xFC04C045)
+#define MCF_INTC1_ICR6 MCF_REG08(0xFC04C046)
+#define MCF_INTC1_ICR7 MCF_REG08(0xFC04C047)
+#define MCF_INTC1_ICR8 MCF_REG08(0xFC04C048)
+#define MCF_INTC1_ICR9 MCF_REG08(0xFC04C049)
+#define MCF_INTC1_ICR10 MCF_REG08(0xFC04C04A)
+#define MCF_INTC1_ICR11 MCF_REG08(0xFC04C04B)
+#define MCF_INTC1_ICR12 MCF_REG08(0xFC04C04C)
+#define MCF_INTC1_ICR13 MCF_REG08(0xFC04C04D)
+#define MCF_INTC1_ICR14 MCF_REG08(0xFC04C04E)
+#define MCF_INTC1_ICR15 MCF_REG08(0xFC04C04F)
+#define MCF_INTC1_ICR16 MCF_REG08(0xFC04C050)
+#define MCF_INTC1_ICR17 MCF_REG08(0xFC04C051)
+#define MCF_INTC1_ICR18 MCF_REG08(0xFC04C052)
+#define MCF_INTC1_ICR19 MCF_REG08(0xFC04C053)
+#define MCF_INTC1_ICR20 MCF_REG08(0xFC04C054)
+#define MCF_INTC1_ICR21 MCF_REG08(0xFC04C055)
+#define MCF_INTC1_ICR22 MCF_REG08(0xFC04C056)
+#define MCF_INTC1_ICR23 MCF_REG08(0xFC04C057)
+#define MCF_INTC1_ICR24 MCF_REG08(0xFC04C058)
+#define MCF_INTC1_ICR25 MCF_REG08(0xFC04C059)
+#define MCF_INTC1_ICR26 MCF_REG08(0xFC04C05A)
+#define MCF_INTC1_ICR27 MCF_REG08(0xFC04C05B)
+#define MCF_INTC1_ICR28 MCF_REG08(0xFC04C05C)
+#define MCF_INTC1_ICR29 MCF_REG08(0xFC04C05D)
+#define MCF_INTC1_ICR30 MCF_REG08(0xFC04C05E)
+#define MCF_INTC1_ICR31 MCF_REG08(0xFC04C05F)
+#define MCF_INTC1_ICR32 MCF_REG08(0xFC04C060)
+#define MCF_INTC1_ICR33 MCF_REG08(0xFC04C061)
+#define MCF_INTC1_ICR34 MCF_REG08(0xFC04C062)
+#define MCF_INTC1_ICR35 MCF_REG08(0xFC04C063)
+#define MCF_INTC1_ICR36 MCF_REG08(0xFC04C064)
+#define MCF_INTC1_ICR37 MCF_REG08(0xFC04C065)
+#define MCF_INTC1_ICR38 MCF_REG08(0xFC04C066)
+#define MCF_INTC1_ICR39 MCF_REG08(0xFC04C067)
+#define MCF_INTC1_ICR40 MCF_REG08(0xFC04C068)
+#define MCF_INTC1_ICR41 MCF_REG08(0xFC04C069)
+#define MCF_INTC1_ICR42 MCF_REG08(0xFC04C06A)
+#define MCF_INTC1_ICR43 MCF_REG08(0xFC04C06B)
+#define MCF_INTC1_ICR44 MCF_REG08(0xFC04C06C)
+#define MCF_INTC1_ICR45 MCF_REG08(0xFC04C06D)
+#define MCF_INTC1_ICR46 MCF_REG08(0xFC04C06E)
+#define MCF_INTC1_ICR47 MCF_REG08(0xFC04C06F)
+#define MCF_INTC1_ICR48 MCF_REG08(0xFC04C070)
+#define MCF_INTC1_ICR49 MCF_REG08(0xFC04C071)
+#define MCF_INTC1_ICR50 MCF_REG08(0xFC04C072)
+#define MCF_INTC1_ICR51 MCF_REG08(0xFC04C073)
+#define MCF_INTC1_ICR52 MCF_REG08(0xFC04C074)
+#define MCF_INTC1_ICR53 MCF_REG08(0xFC04C075)
+#define MCF_INTC1_ICR54 MCF_REG08(0xFC04C076)
+#define MCF_INTC1_ICR55 MCF_REG08(0xFC04C077)
+#define MCF_INTC1_ICR56 MCF_REG08(0xFC04C078)
+#define MCF_INTC1_ICR57 MCF_REG08(0xFC04C079)
+#define MCF_INTC1_ICR58 MCF_REG08(0xFC04C07A)
+#define MCF_INTC1_ICR59 MCF_REG08(0xFC04C07B)
+#define MCF_INTC1_ICR60 MCF_REG08(0xFC04C07C)
+#define MCF_INTC1_ICR61 MCF_REG08(0xFC04C07D)
+#define MCF_INTC1_ICR62 MCF_REG08(0xFC04C07E)
+#define MCF_INTC1_ICR63 MCF_REG08(0xFC04C07F)
+#define MCF_INTC1_ICR(x) MCF_REG08(0xFC04C040+((x)*0x001))
+#define MCF_INTC1_SWIACK MCF_REG08(0xFC04C0E0)
+#define MCF_INTC1_L1IACK MCF_REG08(0xFC04C0E4)
+#define MCF_INTC1_L2IACK MCF_REG08(0xFC04C0E8)
+#define MCF_INTC1_L3IACK MCF_REG08(0xFC04C0EC)
+#define MCF_INTC1_L4IACK MCF_REG08(0xFC04C0F0)
+#define MCF_INTC1_L5IACK MCF_REG08(0xFC04C0F4)
+#define MCF_INTC1_L6IACK MCF_REG08(0xFC04C0F8)
+#define MCF_INTC1_L7IACK MCF_REG08(0xFC04C0FC)
+#define MCF_INTC1_LIACK(x) MCF_REG08(0xFC04C0E4+((x)*0x004))
+#define MCF_INTC_IPRH(x) MCF_REG32(0xFC048000+((x)*0x4000))
+#define MCF_INTC_IPRL(x) MCF_REG32(0xFC048004+((x)*0x4000))
+#define MCF_INTC_IMRH(x) MCF_REG32(0xFC048008+((x)*0x4000))
+#define MCF_INTC_IMRL(x) MCF_REG32(0xFC04800C+((x)*0x4000))
+#define MCF_INTC_INTFRCH(x) MCF_REG32(0xFC048010+((x)*0x4000))
+#define MCF_INTC_INTFRCL(x) MCF_REG32(0xFC048014+((x)*0x4000))
+#define MCF_INTC_ICONFIG(x) MCF_REG16(0xFC04801A+((x)*0x4000))
+#define MCF_INTC_SIMR(x) MCF_REG08(0xFC04801C+((x)*0x4000))
+#define MCF_INTC_CIMR(x) MCF_REG08(0xFC04801D+((x)*0x4000))
+#define MCF_INTC_CLMASK(x) MCF_REG08(0xFC04801E+((x)*0x4000))
+#define MCF_INTC_SLMASK(x) MCF_REG08(0xFC04801F+((x)*0x4000))
+#define MCF_INTC_ICR0(x) MCF_REG08(0xFC048040+((x)*0x4000))
+#define MCF_INTC_ICR1(x) MCF_REG08(0xFC048041+((x)*0x4000))
+#define MCF_INTC_ICR2(x) MCF_REG08(0xFC048042+((x)*0x4000))
+#define MCF_INTC_ICR3(x) MCF_REG08(0xFC048043+((x)*0x4000))
+#define MCF_INTC_ICR4(x) MCF_REG08(0xFC048044+((x)*0x4000))
+#define MCF_INTC_ICR5(x) MCF_REG08(0xFC048045+((x)*0x4000))
+#define MCF_INTC_ICR6(x) MCF_REG08(0xFC048046+((x)*0x4000))
+#define MCF_INTC_ICR7(x) MCF_REG08(0xFC048047+((x)*0x4000))
+#define MCF_INTC_ICR8(x) MCF_REG08(0xFC048048+((x)*0x4000))
+#define MCF_INTC_ICR9(x) MCF_REG08(0xFC048049+((x)*0x4000))
+#define MCF_INTC_ICR10(x) MCF_REG08(0xFC04804A+((x)*0x4000))
+#define MCF_INTC_ICR11(x) MCF_REG08(0xFC04804B+((x)*0x4000))
+#define MCF_INTC_ICR12(x) MCF_REG08(0xFC04804C+((x)*0x4000))
+#define MCF_INTC_ICR13(x) MCF_REG08(0xFC04804D+((x)*0x4000))
+#define MCF_INTC_ICR14(x) MCF_REG08(0xFC04804E+((x)*0x4000))
+#define MCF_INTC_ICR15(x) MCF_REG08(0xFC04804F+((x)*0x4000))
+#define MCF_INTC_ICR16(x) MCF_REG08(0xFC048050+((x)*0x4000))
+#define MCF_INTC_ICR17(x) MCF_REG08(0xFC048051+((x)*0x4000))
+#define MCF_INTC_ICR18(x) MCF_REG08(0xFC048052+((x)*0x4000))
+#define MCF_INTC_ICR19(x) MCF_REG08(0xFC048053+((x)*0x4000))
+#define MCF_INTC_ICR20(x) MCF_REG08(0xFC048054+((x)*0x4000))
+#define MCF_INTC_ICR21(x) MCF_REG08(0xFC048055+((x)*0x4000))
+#define MCF_INTC_ICR22(x) MCF_REG08(0xFC048056+((x)*0x4000))
+#define MCF_INTC_ICR23(x) MCF_REG08(0xFC048057+((x)*0x4000))
+#define MCF_INTC_ICR24(x) MCF_REG08(0xFC048058+((x)*0x4000))
+#define MCF_INTC_ICR25(x) MCF_REG08(0xFC048059+((x)*0x4000))
+#define MCF_INTC_ICR26(x) MCF_REG08(0xFC04805A+((x)*0x4000))
+#define MCF_INTC_ICR27(x) MCF_REG08(0xFC04805B+((x)*0x4000))
+#define MCF_INTC_ICR28(x) MCF_REG08(0xFC04805C+((x)*0x4000))
+#define MCF_INTC_ICR29(x) MCF_REG08(0xFC04805D+((x)*0x4000))
+#define MCF_INTC_ICR30(x) MCF_REG08(0xFC04805E+((x)*0x4000))
+#define MCF_INTC_ICR31(x) MCF_REG08(0xFC04805F+((x)*0x4000))
+#define MCF_INTC_ICR32(x) MCF_REG08(0xFC048060+((x)*0x4000))
+#define MCF_INTC_ICR33(x) MCF_REG08(0xFC048061+((x)*0x4000))
+#define MCF_INTC_ICR34(x) MCF_REG08(0xFC048062+((x)*0x4000))
+#define MCF_INTC_ICR35(x) MCF_REG08(0xFC048063+((x)*0x4000))
+#define MCF_INTC_ICR36(x) MCF_REG08(0xFC048064+((x)*0x4000))
+#define MCF_INTC_ICR37(x) MCF_REG08(0xFC048065+((x)*0x4000))
+#define MCF_INTC_ICR38(x) MCF_REG08(0xFC048066+((x)*0x4000))
+#define MCF_INTC_ICR39(x) MCF_REG08(0xFC048067+((x)*0x4000))
+#define MCF_INTC_ICR40(x) MCF_REG08(0xFC048068+((x)*0x4000))
+#define MCF_INTC_ICR41(x) MCF_REG08(0xFC048069+((x)*0x4000))
+#define MCF_INTC_ICR42(x) MCF_REG08(0xFC04806A+((x)*0x4000))
+#define MCF_INTC_ICR43(x) MCF_REG08(0xFC04806B+((x)*0x4000))
+#define MCF_INTC_ICR44(x) MCF_REG08(0xFC04806C+((x)*0x4000))
+#define MCF_INTC_ICR45(x) MCF_REG08(0xFC04806D+((x)*0x4000))
+#define MCF_INTC_ICR46(x) MCF_REG08(0xFC04806E+((x)*0x4000))
+#define MCF_INTC_ICR47(x) MCF_REG08(0xFC04806F+((x)*0x4000))
+#define MCF_INTC_ICR48(x) MCF_REG08(0xFC048070+((x)*0x4000))
+#define MCF_INTC_ICR49(x) MCF_REG08(0xFC048071+((x)*0x4000))
+#define MCF_INTC_ICR50(x) MCF_REG08(0xFC048072+((x)*0x4000))
+#define MCF_INTC_ICR51(x) MCF_REG08(0xFC048073+((x)*0x4000))
+#define MCF_INTC_ICR52(x) MCF_REG08(0xFC048074+((x)*0x4000))
+#define MCF_INTC_ICR53(x) MCF_REG08(0xFC048075+((x)*0x4000))
+#define MCF_INTC_ICR54(x) MCF_REG08(0xFC048076+((x)*0x4000))
+#define MCF_INTC_ICR55(x) MCF_REG08(0xFC048077+((x)*0x4000))
+#define MCF_INTC_ICR56(x) MCF_REG08(0xFC048078+((x)*0x4000))
+#define MCF_INTC_ICR57(x) MCF_REG08(0xFC048079+((x)*0x4000))
+#define MCF_INTC_ICR58(x) MCF_REG08(0xFC04807A+((x)*0x4000))
+#define MCF_INTC_ICR59(x) MCF_REG08(0xFC04807B+((x)*0x4000))
+#define MCF_INTC_ICR60(x) MCF_REG08(0xFC04807C+((x)*0x4000))
+#define MCF_INTC_ICR61(x) MCF_REG08(0xFC04807D+((x)*0x4000))
+#define MCF_INTC_ICR62(x) MCF_REG08(0xFC04807E+((x)*0x4000))
+#define MCF_INTC_ICR63(x) MCF_REG08(0xFC04807F+((x)*0x4000))
+#define MCF_INTC_SWIACK(x) MCF_REG08(0xFC0480E0+((x)*0x4000))
+#define MCF_INTC_L1IACK(x) MCF_REG08(0xFC0480E4+((x)*0x4000))
+#define MCF_INTC_L2IACK(x) MCF_REG08(0xFC0480E8+((x)*0x4000))
+#define MCF_INTC_L3IACK(x) MCF_REG08(0xFC0480EC+((x)*0x4000))
+#define MCF_INTC_L4IACK(x) MCF_REG08(0xFC0480F0+((x)*0x4000))
+#define MCF_INTC_L5IACK(x) MCF_REG08(0xFC0480F4+((x)*0x4000))
+#define MCF_INTC_L6IACK(x) MCF_REG08(0xFC0480F8+((x)*0x4000))
+#define MCF_INTC_L7IACK(x) MCF_REG08(0xFC0480FC+((x)*0x4000))
+
+/* Bit definitions and macros for MCF_INTC_IPRH */
+#define MCF_INTC_IPRH_INT32 (0x00000001)
+#define MCF_INTC_IPRH_INT33 (0x00000002)
+#define MCF_INTC_IPRH_INT34 (0x00000004)
+#define MCF_INTC_IPRH_INT35 (0x00000008)
+#define MCF_INTC_IPRH_INT36 (0x00000010)
+#define MCF_INTC_IPRH_INT37 (0x00000020)
+#define MCF_INTC_IPRH_INT38 (0x00000040)
+#define MCF_INTC_IPRH_INT39 (0x00000080)
+#define MCF_INTC_IPRH_INT40 (0x00000100)
+#define MCF_INTC_IPRH_INT41 (0x00000200)
+#define MCF_INTC_IPRH_INT42 (0x00000400)
+#define MCF_INTC_IPRH_INT43 (0x00000800)
+#define MCF_INTC_IPRH_INT44 (0x00001000)
+#define MCF_INTC_IPRH_INT45 (0x00002000)
+#define MCF_INTC_IPRH_INT46 (0x00004000)
+#define MCF_INTC_IPRH_INT47 (0x00008000)
+#define MCF_INTC_IPRH_INT48 (0x00010000)
+#define MCF_INTC_IPRH_INT49 (0x00020000)
+#define MCF_INTC_IPRH_INT50 (0x00040000)
+#define MCF_INTC_IPRH_INT51 (0x00080000)
+#define MCF_INTC_IPRH_INT52 (0x00100000)
+#define MCF_INTC_IPRH_INT53 (0x00200000)
+#define MCF_INTC_IPRH_INT54 (0x00400000)
+#define MCF_INTC_IPRH_INT55 (0x00800000)
+#define MCF_INTC_IPRH_INT56 (0x01000000)
+#define MCF_INTC_IPRH_INT57 (0x02000000)
+#define MCF_INTC_IPRH_INT58 (0x04000000)
+#define MCF_INTC_IPRH_INT59 (0x08000000)
+#define MCF_INTC_IPRH_INT60 (0x10000000)
+#define MCF_INTC_IPRH_INT61 (0x20000000)
+#define MCF_INTC_IPRH_INT62 (0x40000000)
+#define MCF_INTC_IPRH_INT63 (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_IPRL */
+#define MCF_INTC_IPRL_INT0 (0x00000001)
+#define MCF_INTC_IPRL_INT1 (0x00000002)
+#define MCF_INTC_IPRL_INT2 (0x00000004)
+#define MCF_INTC_IPRL_INT3 (0x00000008)
+#define MCF_INTC_IPRL_INT4 (0x00000010)
+#define MCF_INTC_IPRL_INT5 (0x00000020)
+#define MCF_INTC_IPRL_INT6 (0x00000040)
+#define MCF_INTC_IPRL_INT7 (0x00000080)
+#define MCF_INTC_IPRL_INT8 (0x00000100)
+#define MCF_INTC_IPRL_INT9 (0x00000200)
+#define MCF_INTC_IPRL_INT10 (0x00000400)
+#define MCF_INTC_IPRL_INT11 (0x00000800)
+#define MCF_INTC_IPRL_INT12 (0x00001000)
+#define MCF_INTC_IPRL_INT13 (0x00002000)
+#define MCF_INTC_IPRL_INT14 (0x00004000)
+#define MCF_INTC_IPRL_INT15 (0x00008000)
+#define MCF_INTC_IPRL_INT16 (0x00010000)
+#define MCF_INTC_IPRL_INT17 (0x00020000)
+#define MCF_INTC_IPRL_INT18 (0x00040000)
+#define MCF_INTC_IPRL_INT19 (0x00080000)
+#define MCF_INTC_IPRL_INT20 (0x00100000)
+#define MCF_INTC_IPRL_INT21 (0x00200000)
+#define MCF_INTC_IPRL_INT22 (0x00400000)
+#define MCF_INTC_IPRL_INT23 (0x00800000)
+#define MCF_INTC_IPRL_INT24 (0x01000000)
+#define MCF_INTC_IPRL_INT25 (0x02000000)
+#define MCF_INTC_IPRL_INT26 (0x04000000)
+#define MCF_INTC_IPRL_INT27 (0x08000000)
+#define MCF_INTC_IPRL_INT28 (0x10000000)
+#define MCF_INTC_IPRL_INT29 (0x20000000)
+#define MCF_INTC_IPRL_INT30 (0x40000000)
+#define MCF_INTC_IPRL_INT31 (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_IMRH */
+#define MCF_INTC_IMRH_INT_MASK32 (0x00000001)
+#define MCF_INTC_IMRH_INT_MASK33 (0x00000002)
+#define MCF_INTC_IMRH_INT_MASK34 (0x00000004)
+#define MCF_INTC_IMRH_INT_MASK35 (0x00000008)
+#define MCF_INTC_IMRH_INT_MASK36 (0x00000010)
+#define MCF_INTC_IMRH_INT_MASK37 (0x00000020)
+#define MCF_INTC_IMRH_INT_MASK38 (0x00000040)
+#define MCF_INTC_IMRH_INT_MASK39 (0x00000080)
+#define MCF_INTC_IMRH_INT_MASK40 (0x00000100)
+#define MCF_INTC_IMRH_INT_MASK41 (0x00000200)
+#define MCF_INTC_IMRH_INT_MASK42 (0x00000400)
+#define MCF_INTC_IMRH_INT_MASK43 (0x00000800)
+#define MCF_INTC_IMRH_INT_MASK44 (0x00001000)
+#define MCF_INTC_IMRH_INT_MASK45 (0x00002000)
+#define MCF_INTC_IMRH_INT_MASK46 (0x00004000)
+#define MCF_INTC_IMRH_INT_MASK47 (0x00008000)
+#define MCF_INTC_IMRH_INT_MASK48 (0x00010000)
+#define MCF_INTC_IMRH_INT_MASK49 (0x00020000)
+#define MCF_INTC_IMRH_INT_MASK50 (0x00040000)
+#define MCF_INTC_IMRH_INT_MASK51 (0x00080000)
+#define MCF_INTC_IMRH_INT_MASK52 (0x00100000)
+#define MCF_INTC_IMRH_INT_MASK53 (0x00200000)
+#define MCF_INTC_IMRH_INT_MASK54 (0x00400000)
+#define MCF_INTC_IMRH_INT_MASK55 (0x00800000)
+#define MCF_INTC_IMRH_INT_MASK56 (0x01000000)
+#define MCF_INTC_IMRH_INT_MASK57 (0x02000000)
+#define MCF_INTC_IMRH_INT_MASK58 (0x04000000)
+#define MCF_INTC_IMRH_INT_MASK59 (0x08000000)
+#define MCF_INTC_IMRH_INT_MASK60 (0x10000000)
+#define MCF_INTC_IMRH_INT_MASK61 (0x20000000)
+#define MCF_INTC_IMRH_INT_MASK62 (0x40000000)
+#define MCF_INTC_IMRH_INT_MASK63 (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_IMRL */
+#define MCF_INTC_IMRL_INT_MASK0 (0x00000001)
+#define MCF_INTC_IMRL_INT_MASK1 (0x00000002)
+#define MCF_INTC_IMRL_INT_MASK2 (0x00000004)
+#define MCF_INTC_IMRL_INT_MASK3 (0x00000008)
+#define MCF_INTC_IMRL_INT_MASK4 (0x00000010)
+#define MCF_INTC_IMRL_INT_MASK5 (0x00000020)
+#define MCF_INTC_IMRL_INT_MASK6 (0x00000040)
+#define MCF_INTC_IMRL_INT_MASK7 (0x00000080)
+#define MCF_INTC_IMRL_INT_MASK8 (0x00000100)
+#define MCF_INTC_IMRL_INT_MASK9 (0x00000200)
+#define MCF_INTC_IMRL_INT_MASK10 (0x00000400)
+#define MCF_INTC_IMRL_INT_MASK11 (0x00000800)
+#define MCF_INTC_IMRL_INT_MASK12 (0x00001000)
+#define MCF_INTC_IMRL_INT_MASK13 (0x00002000)
+#define MCF_INTC_IMRL_INT_MASK14 (0x00004000)
+#define MCF_INTC_IMRL_INT_MASK15 (0x00008000)
+#define MCF_INTC_IMRL_INT_MASK16 (0x00010000)
+#define MCF_INTC_IMRL_INT_MASK17 (0x00020000)
+#define MCF_INTC_IMRL_INT_MASK18 (0x00040000)
+#define MCF_INTC_IMRL_INT_MASK19 (0x00080000)
+#define MCF_INTC_IMRL_INT_MASK20 (0x00100000)
+#define MCF_INTC_IMRL_INT_MASK21 (0x00200000)
+#define MCF_INTC_IMRL_INT_MASK22 (0x00400000)
+#define MCF_INTC_IMRL_INT_MASK23 (0x00800000)
+#define MCF_INTC_IMRL_INT_MASK24 (0x01000000)
+#define MCF_INTC_IMRL_INT_MASK25 (0x02000000)
+#define MCF_INTC_IMRL_INT_MASK26 (0x04000000)
+#define MCF_INTC_IMRL_INT_MASK27 (0x08000000)
+#define MCF_INTC_IMRL_INT_MASK28 (0x10000000)
+#define MCF_INTC_IMRL_INT_MASK29 (0x20000000)
+#define MCF_INTC_IMRL_INT_MASK30 (0x40000000)
+#define MCF_INTC_IMRL_INT_MASK31 (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_INTFRCH */
+#define MCF_INTC_INTFRCH_INTFRC32 (0x00000001)
+#define MCF_INTC_INTFRCH_INTFRC33 (0x00000002)
+#define MCF_INTC_INTFRCH_INTFRC34 (0x00000004)
+#define MCF_INTC_INTFRCH_INTFRC35 (0x00000008)
+#define MCF_INTC_INTFRCH_INTFRC36 (0x00000010)
+#define MCF_INTC_INTFRCH_INTFRC37 (0x00000020)
+#define MCF_INTC_INTFRCH_INTFRC38 (0x00000040)
+#define MCF_INTC_INTFRCH_INTFRC39 (0x00000080)
+#define MCF_INTC_INTFRCH_INTFRC40 (0x00000100)
+#define MCF_INTC_INTFRCH_INTFRC41 (0x00000200)
+#define MCF_INTC_INTFRCH_INTFRC42 (0x00000400)
+#define MCF_INTC_INTFRCH_INTFRC43 (0x00000800)
+#define MCF_INTC_INTFRCH_INTFRC44 (0x00001000)
+#define MCF_INTC_INTFRCH_INTFRC45 (0x00002000)
+#define MCF_INTC_INTFRCH_INTFRC46 (0x00004000)
+#define MCF_INTC_INTFRCH_INTFRC47 (0x00008000)
+#define MCF_INTC_INTFRCH_INTFRC48 (0x00010000)
+#define MCF_INTC_INTFRCH_INTFRC49 (0x00020000)
+#define MCF_INTC_INTFRCH_INTFRC50 (0x00040000)
+#define MCF_INTC_INTFRCH_INTFRC51 (0x00080000)
+#define MCF_INTC_INTFRCH_INTFRC52 (0x00100000)
+#define MCF_INTC_INTFRCH_INTFRC53 (0x00200000)
+#define MCF_INTC_INTFRCH_INTFRC54 (0x00400000)
+#define MCF_INTC_INTFRCH_INTFRC55 (0x00800000)
+#define MCF_INTC_INTFRCH_INTFRC56 (0x01000000)
+#define MCF_INTC_INTFRCH_INTFRC57 (0x02000000)
+#define MCF_INTC_INTFRCH_INTFRC58 (0x04000000)
+#define MCF_INTC_INTFRCH_INTFRC59 (0x08000000)
+#define MCF_INTC_INTFRCH_INTFRC60 (0x10000000)
+#define MCF_INTC_INTFRCH_INTFRC61 (0x20000000)
+#define MCF_INTC_INTFRCH_INTFRC62 (0x40000000)
+#define MCF_INTC_INTFRCH_INTFRC63 (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_INTFRCL */
+#define MCF_INTC_INTFRCL_INTFRC0 (0x00000001)
+#define MCF_INTC_INTFRCL_INTFRC1 (0x00000002)
+#define MCF_INTC_INTFRCL_INTFRC2 (0x00000004)
+#define MCF_INTC_INTFRCL_INTFRC3 (0x00000008)
+#define MCF_INTC_INTFRCL_INTFRC4 (0x00000010)
+#define MCF_INTC_INTFRCL_INTFRC5 (0x00000020)
+#define MCF_INTC_INTFRCL_INTFRC6 (0x00000040)
+#define MCF_INTC_INTFRCL_INTFRC7 (0x00000080)
+#define MCF_INTC_INTFRCL_INTFRC8 (0x00000100)
+#define MCF_INTC_INTFRCL_INTFRC9 (0x00000200)
+#define MCF_INTC_INTFRCL_INTFRC10 (0x00000400)
+#define MCF_INTC_INTFRCL_INTFRC11 (0x00000800)
+#define MCF_INTC_INTFRCL_INTFRC12 (0x00001000)
+#define MCF_INTC_INTFRCL_INTFRC13 (0x00002000)
+#define MCF_INTC_INTFRCL_INTFRC14 (0x00004000)
+#define MCF_INTC_INTFRCL_INTFRC15 (0x00008000)
+#define MCF_INTC_INTFRCL_INTFRC16 (0x00010000)
+#define MCF_INTC_INTFRCL_INTFRC17 (0x00020000)
+#define MCF_INTC_INTFRCL_INTFRC18 (0x00040000)
+#define MCF_INTC_INTFRCL_INTFRC19 (0x00080000)
+#define MCF_INTC_INTFRCL_INTFRC20 (0x00100000)
+#define MCF_INTC_INTFRCL_INTFRC21 (0x00200000)
+#define MCF_INTC_INTFRCL_INTFRC22 (0x00400000)
+#define MCF_INTC_INTFRCL_INTFRC23 (0x00800000)
+#define MCF_INTC_INTFRCL_INTFRC24 (0x01000000)
+#define MCF_INTC_INTFRCL_INTFRC25 (0x02000000)
+#define MCF_INTC_INTFRCL_INTFRC26 (0x04000000)
+#define MCF_INTC_INTFRCL_INTFRC27 (0x08000000)
+#define MCF_INTC_INTFRCL_INTFRC28 (0x10000000)
+#define MCF_INTC_INTFRCL_INTFRC29 (0x20000000)
+#define MCF_INTC_INTFRCL_INTFRC30 (0x40000000)
+#define MCF_INTC_INTFRCL_INTFRC31 (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_ICONFIG */
+#define MCF_INTC_ICONFIG_EMASK (0x0020)
+#define MCF_INTC_ICONFIG_ELVLPRI1 (0x0200)
+#define MCF_INTC_ICONFIG_ELVLPRI2 (0x0400)
+#define MCF_INTC_ICONFIG_ELVLPRI3 (0x0800)
+#define MCF_INTC_ICONFIG_ELVLPRI4 (0x1000)
+#define MCF_INTC_ICONFIG_ELVLPRI5 (0x2000)
+#define MCF_INTC_ICONFIG_ELVLPRI6 (0x4000)
+#define MCF_INTC_ICONFIG_ELVLPRI7 (0x8000)
+
+/* Bit definitions and macros for MCF_INTC_SIMR */
+#define MCF_INTC_SIMR_SIMR(x) (((x)&0x7F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_CIMR */
+#define MCF_INTC_CIMR_CIMR(x) (((x)&0x7F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_CLMASK */
+#define MCF_INTC_CLMASK_CLMASK(x) (((x)&0x0F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_SLMASK */
+#define MCF_INTC_SLMASK_SLMASK(x) (((x)&0x0F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_ICR */
+#define MCF_INTC_ICR_IL(x) (((x)&0x07)<<0)
+
+/* Bit definitions and macros for MCF_INTC_SWIACK */
+#define MCF_INTC_SWIACK_VECTOR(x) (((x)&0xFF)<<0)
+
+/* Bit definitions and macros for MCF_INTC_LIACK */
+#define MCF_INTC_LIACK_VECTOR(x) (((x)&0xFF)<<0)
+
+/********************************************************************/
+/*********************************************************************
+*
+* LCD Controller (LCDC)
+*
+*********************************************************************/
+
+/* Register read/write macros */
+#define MCF_LCDC_LSSAR MCF_REG32(0xFC0AC000)
+#define MCF_LCDC_LSR MCF_REG32(0xFC0AC004)
+#define MCF_LCDC_LVPWR MCF_REG32(0xFC0AC008)
+#define MCF_LCDC_LCPR MCF_REG32(0xFC0AC00C)
+#define MCF_LCDC_LCWHBR MCF_REG32(0xFC0AC010)
+#define MCF_LCDC_LCCMR MCF_REG32(0xFC0AC014)
+#define MCF_LCDC_LPCR MCF_REG32(0xFC0AC018)
+#define MCF_LCDC_LHCR MCF_REG32(0xFC0AC01C)
+#define MCF_LCDC_LVCR MCF_REG32(0xFC0AC020)
+#define MCF_LCDC_LPOR MCF_REG32(0xFC0AC024)
+#define MCF_LCDC_LSCR MCF_REG32(0xFC0AC028)
+#define MCF_LCDC_LPCCR MCF_REG32(0xFC0AC02C)
+#define MCF_LCDC_LDCR MCF_REG32(0xFC0AC030)
+#define MCF_LCDC_LRMCR MCF_REG32(0xFC0AC034)
+#define MCF_LCDC_LICR MCF_REG32(0xFC0AC038)
+#define MCF_LCDC_LIER MCF_REG32(0xFC0AC03C)
+#define MCF_LCDC_LISR MCF_REG32(0xFC0AC040)
+#define MCF_LCDC_LGWSAR MCF_REG32(0xFC0AC050)
+#define MCF_LCDC_LGWSR MCF_REG32(0xFC0AC054)
+#define MCF_LCDC_LGWVPWR MCF_REG32(0xFC0AC058)
+#define MCF_LCDC_LGWPOR MCF_REG32(0xFC0AC05C)
+#define MCF_LCDC_LGWPR MCF_REG32(0xFC0AC060)
+#define MCF_LCDC_LGWCR MCF_REG32(0xFC0AC064)
+#define MCF_LCDC_LGWDCR MCF_REG32(0xFC0AC068)
+#define MCF_LCDC_BPLUT_BASE MCF_REG32(0xFC0AC800)
+#define MCF_LCDC_GWLUT_BASE MCF_REG32(0xFC0ACC00)
+
+/* Bit definitions and macros for MCF_LCDC_LSSAR */
+#define MCF_LCDC_LSSAR_SSA(x) (((x)&0x3FFFFFFF)<<2)
+
+/* Bit definitions and macros for MCF_LCDC_LSR */
+#define MCF_LCDC_LSR_YMAX(x) (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LSR_XMAX(x) (((x)&0x0000003F)<<20)
+
+/* Bit definitions and macros for MCF_LCDC_LVPWR */
+#define MCF_LCDC_LVPWR_VPW(x) (((x)&0x000003FF)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LCPR */
+#define MCF_LCDC_LCPR_CYP(x) (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LCPR_CXP(x) (((x)&0x000003FF)<<16)
+#define MCF_LCDC_LCPR_OP (0x10000000)
+#define MCF_LCDC_LCPR_CC(x) (((x)&0x00000003)<<30)
+#define MCF_LCDC_LCPR_CC_TRANSPARENT (0x00000000)
+#define MCF_LCDC_LCPR_CC_OR (0x40000000)
+#define MCF_LCDC_LCPR_CC_XOR (0x80000000)
+#define MCF_LCDC_LCPR_CC_AND (0xC0000000)
+#define MCF_LCDC_LCPR_OP_ON (0x10000000)
+#define MCF_LCDC_LCPR_OP_OFF (0x00000000)
+
+/* Bit definitions and macros for MCF_LCDC_LCWHBR */
+#define MCF_LCDC_LCWHBR_BD(x) (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LCWHBR_CH(x) (((x)&0x0000001F)<<16)
+#define MCF_LCDC_LCWHBR_CW(x) (((x)&0x0000001F)<<24)
+#define MCF_LCDC_LCWHBR_BK_EN (0x80000000)
+#define MCF_LCDC_LCWHBR_BK_EN_ON (0x80000000)
+#define MCF_LCDC_LCWHBR_BK_EN_OFF (0x00000000)
+
+/* Bit definitions and macros for MCF_LCDC_LCCMR */
+#define MCF_LCDC_LCCMR_CUR_COL_B(x) (((x)&0x0000003F)<<0)
+#define MCF_LCDC_LCCMR_CUR_COL_G(x) (((x)&0x0000003F)<<6)
+#define MCF_LCDC_LCCMR_CUR_COL_R(x) (((x)&0x0000003F)<<12)
+
+/* Bit definitions and macros for MCF_LCDC_LPCR */
+#define MCF_LCDC_LPCR_PCD(x) (((x)&0x0000003F)<<0)
+#define MCF_LCDC_LPCR_SHARP (0x00000040)
+#define MCF_LCDC_LPCR_SCLKSEL (0x00000080)
+#define MCF_LCDC_LPCR_ACD(x) (((x)&0x0000007F)<<8)
+#define MCF_LCDC_LPCR_ACDSEL (0x00008000)
+#define MCF_LCDC_LPCR_REV_VS (0x00010000)
+#define MCF_LCDC_LPCR_SWAP_SEL (0x00020000)
+#define MCF_LCDC_LPCR_ENDSEL (0x00040000)
+#define MCF_LCDC_LPCR_SCLKIDLE (0x00080000)
+#define MCF_LCDC_LPCR_OEPOL (0x00100000)
+#define MCF_LCDC_LPCR_CLKPOL (0x00200000)
+#define MCF_LCDC_LPCR_LPPOL (0x00400000)
+#define MCF_LCDC_LPCR_FLM (0x00800000)
+#define MCF_LCDC_LPCR_PIXPOL (0x01000000)
+#define MCF_LCDC_LPCR_BPIX(x) (((x)&0x00000007)<<25)
+#define MCF_LCDC_LPCR_PBSIZ(x) (((x)&0x00000003)<<28)
+#define MCF_LCDC_LPCR_COLOR (0x40000000)
+#define MCF_LCDC_LPCR_TFT (0x80000000)
+#define MCF_LCDC_LPCR_MODE_MONOCGROME (0x00000000)
+#define MCF_LCDC_LPCR_MODE_CSTN (0x40000000)
+#define MCF_LCDC_LPCR_MODE_TFT (0xC0000000)
+#define MCF_LCDC_LPCR_PBSIZ_1 (0x00000000)
+#define MCF_LCDC_LPCR_PBSIZ_2 (0x10000000)
+#define MCF_LCDC_LPCR_PBSIZ_4 (0x20000000)
+#define MCF_LCDC_LPCR_PBSIZ_8 (0x30000000)
+#define MCF_LCDC_LPCR_BPIX_1bpp (0x00000000)
+#define MCF_LCDC_LPCR_BPIX_2bpp (0x02000000)
+#define MCF_LCDC_LPCR_BPIX_4bpp (0x04000000)
+#define MCF_LCDC_LPCR_BPIX_8bpp (0x06000000)
+#define MCF_LCDC_LPCR_BPIX_12bpp (0x08000000)
+#define MCF_LCDC_LPCR_BPIX_16bpp (0x0A000000)
+#define MCF_LCDC_LPCR_BPIX_18bpp (0x0C000000)
+
+#define MCF_LCDC_LPCR_PANEL_TYPE(x) (((x)&0x00000003)<<30)
+
+/* Bit definitions and macros for MCF_LCDC_LHCR */
+#define MCF_LCDC_LHCR_H_WAIT_2(x) (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LHCR_H_WAIT_1(x) (((x)&0x000000FF)<<8)
+#define MCF_LCDC_LHCR_H_WIDTH(x) (((x)&0x0000003F)<<26)
+
+/* Bit definitions and macros for MCF_LCDC_LVCR */
+#define MCF_LCDC_LVCR_V_WAIT_2(x) (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LVCR_V_WAIT_1(x) (((x)&0x000000FF)<<8)
+#define MCF_LCDC_LVCR_V_WIDTH(x) (((x)&0x0000003F)<<26)
+
+/* Bit definitions and macros for MCF_LCDC_LPOR */
+#define MCF_LCDC_LPOR_POS(x) (((x)&0x0000001F)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LPCCR */
+#define MCF_LCDC_LPCCR_PW(x) (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LPCCR_CC_EN (0x00000100)
+#define MCF_LCDC_LPCCR_SCR(x) (((x)&0x00000003)<<9)
+#define MCF_LCDC_LPCCR_LDMSK (0x00008000)
+#define MCF_LCDC_LPCCR_CLS_HI_WIDTH(x) (((x)&0x000001FF)<<16)
+#define MCF_LCDC_LPCCR_SCR_LINEPULSE (0x00000000)
+#define MCF_LCDC_LPCCR_SCR_PIXELCLK (0x00002000)
+#define MCF_LCDC_LPCCR_SCR_LCDCLOCK (0x00004000)
+
+/* Bit definitions and macros for MCF_LCDC_LDCR */
+#define MCF_LCDC_LDCR_TM(x) (((x)&0x0000001F)<<0)
+#define MCF_LCDC_LDCR_HM(x) (((x)&0x0000001F)<<16)
+#define MCF_LCDC_LDCR_BURST (0x80000000)
+
+/* Bit definitions and macros for MCF_LCDC_LRMCR */
+#define MCF_LCDC_LRMCR_SEL_REF (0x00000001)
+
+/* Bit definitions and macros for MCF_LCDC_LICR */
+#define MCF_LCDC_LICR_INTCON (0x00000001)
+#define MCF_LCDC_LICR_INTSYN (0x00000004)
+#define MCF_LCDC_LICR_GW_INT_CON (0x00000010)
+
+/* Bit definitions and macros for MCF_LCDC_LIER */
+#define MCF_LCDC_LIER_BOF_EN (0x00000001)
+#define MCF_LCDC_LIER_EOF_EN (0x00000002)
+#define MCF_LCDC_LIER_ERR_RES_EN (0x00000004)
+#define MCF_LCDC_LIER_UDR_ERR_EN (0x00000008)
+#define MCF_LCDC_LIER_GW_BOF_EN (0x00000010)
+#define MCF_LCDC_LIER_GW_EOF_EN (0x00000020)
+#define MCF_LCDC_LIER_GW_ERR_RES_EN (0x00000040)
+#define MCF_LCDC_LIER_GW_UDR_ERR_EN (0x00000080)
+
+/* Bit definitions and macros for MCF_LCDC_LISR */
+#define MCF_LCDC_LISR_BOF (0x00000001)
+#define MCF_LCDC_LISR_EOF (0x00000002)
+#define MCF_LCDC_LISR_ERR_RES (0x00000004)
+#define MCF_LCDC_LISR_UDR_ERR (0x00000008)
+#define MCF_LCDC_LISR_GW_BOF (0x00000010)
+#define MCF_LCDC_LISR_GW_EOF (0x00000020)
+#define MCF_LCDC_LISR_GW_ERR_RES (0x00000040)
+#define MCF_LCDC_LISR_GW_UDR_ERR (0x00000080)
+
+/* Bit definitions and macros for MCF_LCDC_LGWSAR */
+#define MCF_LCDC_LGWSAR_GWSA(x) (((x)&0x3FFFFFFF)<<2)
+
+/* Bit definitions and macros for MCF_LCDC_LGWSR */
+#define MCF_LCDC_LGWSR_GWH(x) (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LGWSR_GWW(x) (((x)&0x0000003F)<<20)
+
+/* Bit definitions and macros for MCF_LCDC_LGWVPWR */
+#define MCF_LCDC_LGWVPWR_GWVPW(x) (((x)&0x000003FF)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LGWPOR */
+#define MCF_LCDC_LGWPOR_GWPO(x) (((x)&0x0000001F)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LGWPR */
+#define MCF_LCDC_LGWPR_GWYP(x) (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LGWPR_GWXP(x) (((x)&0x000003FF)<<16)
+
+/* Bit definitions and macros for MCF_LCDC_LGWCR */
+#define MCF_LCDC_LGWCR_GWCKB(x) (((x)&0x0000003F)<<0)
+#define MCF_LCDC_LGWCR_GWCKG(x) (((x)&0x0000003F)<<6)
+#define MCF_LCDC_LGWCR_GWCKR(x) (((x)&0x0000003F)<<12)
+#define MCF_LCDC_LGWCR_GW_RVS (0x00200000)
+#define MCF_LCDC_LGWCR_GWE (0x00400000)
+#define MCF_LCDC_LGWCR_GWCKE (0x00800000)
+#define MCF_LCDC_LGWCR_GWAV(x) (((x)&0x000000FF)<<24)
+
+/* Bit definitions and macros for MCF_LCDC_LGWDCR */
+#define MCF_LCDC_LGWDCR_GWTM(x) (((x)&0x0000001F)<<0)
+#define MCF_LCDC_LGWDCR_GWHM(x) (((x)&0x0000001F)<<16)
+#define MCF_LCDC_LGWDCR_GWBT (0x80000000)
+
+/* Bit definitions and macros for MCF_LCDC_LSCR */
+#define MCF_LCDC_LSCR_PS_RISE_DELAY(x) (((x)&0x0000003F)<<26)
+#define MCF_LCDC_LSCR_CLS_RISE_DELAY(x) (((x)&0x000000FF)<<16)
+#define MCF_LCDC_LSCR_REV_TOGGLE_DELAY(x) (((x)&0x0000000F)<<8)
+#define MCF_LCDC_LSCR_GRAY_2(x) (((x)&0x0000000F)<<4)
+#define MCF_LCDC_LSCR_GRAY_1(x) (((x)&0x0000000F)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_BPLUT_BASE */
+#define MCF_LCDC_BPLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_GWLUT_BASE */
+#define MCF_LCDC_GWLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0)
+
+/*********************************************************************
+ *
+ * Phase Locked Loop (PLL)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_PLL_PODR MCF_REG08(0xFC0C0000)
+#define MCF_PLL_PLLCR MCF_REG08(0xFC0C0004)
+#define MCF_PLL_PMDR MCF_REG08(0xFC0C0008)
+#define MCF_PLL_PFDR MCF_REG08(0xFC0C000C)
+
+/* Bit definitions and macros for MCF_PLL_PODR */
+#define MCF_PLL_PODR_BUSDIV(x) (((x)&0x0F)<<0)
+#define MCF_PLL_PODR_CPUDIV(x) (((x)&0x0F)<<4)
+
+/* Bit definitions and macros for MCF_PLL_PLLCR */
+#define MCF_PLL_PLLCR_DITHDEV(x) (((x)&0x07)<<0)
+#define MCF_PLL_PLLCR_DITHEN (0x80)
+
+/* Bit definitions and macros for MCF_PLL_PMDR */
+#define MCF_PLL_PMDR_MODDIV(x) (((x)&0xFF)<<0)
+
+/* Bit definitions and macros for MCF_PLL_PFDR */
+#define MCF_PLL_PFDR_MFD(x) (((x)&0xFF)<<0)
+
+/*********************************************************************
+ *
+ * System Control Module Registers (SCM)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_SCM_MPR MCF_REG32(0xFC000000)
+#define MCF_SCM_PACRA MCF_REG32(0xFC000020)
+#define MCF_SCM_PACRB MCF_REG32(0xFC000024)
+#define MCF_SCM_PACRC MCF_REG32(0xFC000028)
+#define MCF_SCM_PACRD MCF_REG32(0xFC00002C)
+#define MCF_SCM_PACRE MCF_REG32(0xFC000040)
+#define MCF_SCM_PACRF MCF_REG32(0xFC000044)
+
+#define MCF_SCM_BCR MCF_REG32(0xFC040024)
+
+/*********************************************************************
+ *
+ * SDRAM Controller (SDRAMC)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_SDRAMC_SDMR MCF_REG32(0xFC0B8000)
+#define MCF_SDRAMC_SDCR MCF_REG32(0xFC0B8004)
+#define MCF_SDRAMC_SDCFG1 MCF_REG32(0xFC0B8008)
+#define MCF_SDRAMC_SDCFG2 MCF_REG32(0xFC0B800C)
+#define MCF_SDRAMC_LIMP_FIX MCF_REG32(0xFC0B8080)
+#define MCF_SDRAMC_SDDS MCF_REG32(0xFC0B8100)
+#define MCF_SDRAMC_SDCS0 MCF_REG32(0xFC0B8110)
+#define MCF_SDRAMC_SDCS1 MCF_REG32(0xFC0B8114)
+#define MCF_SDRAMC_SDCS2 MCF_REG32(0xFC0B8118)
+#define MCF_SDRAMC_SDCS3 MCF_REG32(0xFC0B811C)
+#define MCF_SDRAMC_SDCS(x) MCF_REG32(0xFC0B8110+((x)*0x004))
+
+/* Bit definitions and macros for MCF_SDRAMC_SDMR */
+#define MCF_SDRAMC_SDMR_CMD (0x00010000)
+#define MCF_SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18)
+#define MCF_SDRAMC_SDMR_BNKAD(x) (((x)&0x00000003)<<30)
+#define MCF_SDRAMC_SDMR_BNKAD_LMR (0x00000000)
+#define MCF_SDRAMC_SDMR_BNKAD_LEMR (0x40000000)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCR */
+#define MCF_SDRAMC_SDCR_IPALL (0x00000002)
+#define MCF_SDRAMC_SDCR_IREF (0x00000004)
+#define MCF_SDRAMC_SDCR_DQS_OE(x) (((x)&0x0000000F)<<8)
+#define MCF_SDRAMC_SDCR_PS(x) (((x)&0x00000003)<<12)
+#define MCF_SDRAMC_SDCR_RCNT(x) (((x)&0x0000003F)<<16)
+#define MCF_SDRAMC_SDCR_OE_RULE (0x00400000)
+#define MCF_SDRAMC_SDCR_MUX(x) (((x)&0x00000003)<<24)
+#define MCF_SDRAMC_SDCR_REF (0x10000000)
+#define MCF_SDRAMC_SDCR_DDR (0x20000000)
+#define MCF_SDRAMC_SDCR_CKE (0x40000000)
+#define MCF_SDRAMC_SDCR_MODE_EN (0x80000000)
+#define MCF_SDRAMC_SDCR_PS_16 (0x00002000)
+#define MCF_SDRAMC_SDCR_PS_32 (0x00000000)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCFG1 */
+#define MCF_SDRAMC_SDCFG1_WTLAT(x) (((x)&0x00000007)<<4)
+#define MCF_SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8)
+#define MCF_SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12)
+#define MCF_SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16)
+#define MCF_SDRAMC_SDCFG1_RDLAT(x) (((x)&0x0000000F)<<20)
+#define MCF_SDRAMC_SDCFG1_SWT2RD(x) (((x)&0x00000007)<<24)
+#define MCF_SDRAMC_SDCFG1_SRD2RW(x) (((x)&0x0000000F)<<28)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCFG2 */
+#define MCF_SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16)
+#define MCF_SDRAMC_SDCFG2_BRD2WT(x) (((x)&0x0000000F)<<20)
+#define MCF_SDRAMC_SDCFG2_BWT2RW(x) (((x)&0x0000000F)<<24)
+#define MCF_SDRAMC_SDCFG2_BRD2PRE(x) (((x)&0x0000000F)<<28)
+
+/* Device Errata - LIMP mode work around */
+#define MCF_SDRAMC_REFRESH (0x40000000)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDDS */
+#define MCF_SDRAMC_SDDS_SB_D(x) (((x)&0x00000003)<<0)
+#define MCF_SDRAMC_SDDS_SB_S(x) (((x)&0x00000003)<<2)
+#define MCF_SDRAMC_SDDS_SB_A(x) (((x)&0x00000003)<<4)
+#define MCF_SDRAMC_SDDS_SB_C(x) (((x)&0x00000003)<<6)
+#define MCF_SDRAMC_SDDS_SB_E(x) (((x)&0x00000003)<<8)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCS */
+#define MCF_SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)<<0)
+#define MCF_SDRAMC_SDCS_BASE(x) (((x)&0x00000FFF)<<20)
+#define MCF_SDRAMC_SDCS_BA(x) ((x)&0xFFF00000)
+#define MCF_SDRAMC_SDCS_CSSZ_DIABLE (0x00000000)
+#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013)
+#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014)
+#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015)
+#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016)
+#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017)
+#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018)
+#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019)
+#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A)
+#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B)
+#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C)
+#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D)
+#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E)
+#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F)
+
+/*********************************************************************
+ *
+ * FlexCAN module registers
+ *
+ *********************************************************************/
+#define MCF_FLEXCAN_BASEADDR(x) (0xFC020000+(x)*0x0800)
+#define MCF_FLEXCAN_CANMCR(x) MCF_REG32(0xFC020000+(x)*0x0800+0x00)
+#define MCF_FLEXCAN_CANCTRL(x) MCF_REG32(0xFC020000+(x)*0x0800+0x04)
+#define MCF_FLEXCAN_TIMER(x) MCF_REG32(0xFC020000+(x)*0x0800+0x08)
+#define MCF_FLEXCAN_RXGMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x10)
+#define MCF_FLEXCAN_RX14MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x14)
+#define MCF_FLEXCAN_RX15MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x18)
+#define MCF_FLEXCAN_ERRCNT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x1C)
+#define MCF_FLEXCAN_ERRSTAT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x20)
+#define MCF_FLEXCAN_IMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x28)
+#define MCF_FLEXCAN_IFLAG(x) MCF_REG32(0xFC020000+(x)*0x0800+0x30)
+
+#define MCF_FLEXCAN_MB_CNT(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x0)
+#define MCF_FLEXCAN_MB_ID(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x4)
+#define MCF_FLEXCAN_MB_DB(x,y,z) MCF_REG08(0xFC020080+(x)*0x0800+(y)*0x10+0x8+(z)*0x1)
+
+/*
+ * FlexCAN Module Configuration Register
+ */
+#define CANMCR_MDIS (0x80000000)
+#define CANMCR_FRZ (0x40000000)
+#define CANMCR_HALT (0x10000000)
+#define CANMCR_SOFTRST (0x02000000)
+#define CANMCR_FRZACK (0x01000000)
+#define CANMCR_SUPV (0x00800000)
+#define CANMCR_MAXMB(x) ((x)&0x0F)
+
+/*
+ * FlexCAN Control Register
+ */
+#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24)
+#define CANCTRL_RJW(x) (((x)&0x03)<<22)
+#define CANCTRL_PSEG1(x) (((x)&0x07)<<19)
+#define CANCTRL_PSEG2(x) (((x)&0x07)<<16)
+#define CANCTRL_BOFFMSK (0x00008000)
+#define CANCTRL_ERRMSK (0x00004000)
+#define CANCTRL_CLKSRC (0x00002000)
+#define CANCTRL_LPB (0x00001000)
+#define CANCTRL_SAMP (0x00000080)
+#define CANCTRL_BOFFREC (0x00000040)
+#define CANCTRL_TSYNC (0x00000020)
+#define CANCTRL_LBUF (0x00000010)
+#define CANCTRL_LOM (0x00000008)
+#define CANCTRL_PROPSEG(x) ((x)&0x07)
+
+/*
+ * FlexCAN Error Counter Register
+ */
+#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8)
+#define ERRCNT_TXECTR(x) ((x)&0xFF)
+
+/*
+ * FlexCAN Error and Status Register
+ */
+#define ERRSTAT_BITERR(x) (((x)&0x03)<<14)
+#define ERRSTAT_ACKERR (0x00002000)
+#define ERRSTAT_CRCERR (0x00001000)
+#define ERRSTAT_FRMERR (0x00000800)
+#define ERRSTAT_STFERR (0x00000400)
+#define ERRSTAT_TXWRN (0x00000200)
+#define ERRSTAT_RXWRN (0x00000100)
+#define ERRSTAT_IDLE (0x00000080)
+#define ERRSTAT_TXRX (0x00000040)
+#define ERRSTAT_FLTCONF(x) (((x)&0x03)<<4)
+#define ERRSTAT_BOFFINT (0x00000004)
+#define ERRSTAT_ERRINT (0x00000002)
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMASK_BUF15M (0x8000)
+#define IMASK_BUF14M (0x4000)
+#define IMASK_BUF13M (0x2000)
+#define IMASK_BUF12M (0x1000)
+#define IMASK_BUF11M (0x0800)
+#define IMASK_BUF10M (0x0400)
+#define IMASK_BUF9M (0x0200)
+#define IMASK_BUF8M (0x0100)
+#define IMASK_BUF7M (0x0080)
+#define IMASK_BUF6M (0x0040)
+#define IMASK_BUF5M (0x0020)
+#define IMASK_BUF4M (0x0010)
+#define IMASK_BUF3M (0x0008)
+#define IMASK_BUF2M (0x0004)
+#define IMASK_BUF1M (0x0002)
+#define IMASK_BUF0M (0x0001)
+#define IMASK_BUFnM(x) (0x1<<(x))
+#define IMASK_BUFF_ENABLE_ALL (0x1111)
+#define IMASK_BUFF_DISABLE_ALL (0x0000)
+
+/*
+ * Interrupt Flag Register
+ */
+#define IFLAG_BUF15M (0x8000)
+#define IFLAG_BUF14M (0x4000)
+#define IFLAG_BUF13M (0x2000)
+#define IFLAG_BUF12M (0x1000)
+#define IFLAG_BUF11M (0x0800)
+#define IFLAG_BUF10M (0x0400)
+#define IFLAG_BUF9M (0x0200)
+#define IFLAG_BUF8M (0x0100)
+#define IFLAG_BUF7M (0x0080)
+#define IFLAG_BUF6M (0x0040)
+#define IFLAG_BUF5M (0x0020)
+#define IFLAG_BUF4M (0x0010)
+#define IFLAG_BUF3M (0x0008)
+#define IFLAG_BUF2M (0x0004)
+#define IFLAG_BUF1M (0x0002)
+#define IFLAG_BUF0M (0x0001)
+#define IFLAG_BUFF_SET_ALL (0xFFFF)
+#define IFLAG_BUFF_CLEAR_ALL (0x0000)
+#define IFLAG_BUFnM(x) (0x1<<(x))
+
+/*
+ * Message Buffers
+ */
+#define MB_CNT_CODE(x) (((x)&0x0F)<<24)
+#define MB_CNT_SRR (0x00400000)
+#define MB_CNT_IDE (0x00200000)
+#define MB_CNT_RTR (0x00100000)
+#define MB_CNT_LENGTH(x) (((x)&0x0F)<<16)
+#define MB_CNT_TIMESTAMP(x) ((x)&0xFFFF)
+#define MB_ID_STD(x) (((x)&0x07FF)<<18)
+#define MB_ID_EXT(x) ((x)&0x3FFFF)
+
+/*********************************************************************
+ *
+ * Edge Port Module (EPORT)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_EPORT_EPPAR MCF_REG16(0xFC094000)
+#define MCF_EPORT_EPDDR MCF_REG08(0xFC094002)
+#define MCF_EPORT_EPIER MCF_REG08(0xFC094003)
+#define MCF_EPORT_EPDR MCF_REG08(0xFC094004)
+#define MCF_EPORT_EPPDR MCF_REG08(0xFC094005)
+#define MCF_EPORT_EPFR MCF_REG08(0xFC094006)
+
+/* Bit definitions and macros for MCF_EPORT_EPPAR */
+#define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2)
+#define MCF_EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4)
+#define MCF_EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6)
+#define MCF_EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8)
+#define MCF_EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10)
+#define MCF_EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12)
+#define MCF_EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14)
+#define MCF_EPORT_EPPAR_LEVEL (0)
+#define MCF_EPORT_EPPAR_RISING (1)
+#define MCF_EPORT_EPPAR_FALLING (2)
+#define MCF_EPORT_EPPAR_BOTH (3)
+#define MCF_EPORT_EPPAR_EPPA7_LEVEL (0x0000)
+#define MCF_EPORT_EPPAR_EPPA7_RISING (0x4000)
+#define MCF_EPORT_EPPAR_EPPA7_FALLING (0x8000)
+#define MCF_EPORT_EPPAR_EPPA7_BOTH (0xC000)
+#define MCF_EPORT_EPPAR_EPPA6_LEVEL (0x0000)
+#define MCF_EPORT_EPPAR_EPPA6_RISING (0x1000)
+#define MCF_EPORT_EPPAR_EPPA6_FALLING (0x2000)
+#define MCF_EPORT_EPPAR_EPPA6_BOTH (0x3000)
+#define MCF_EPORT_EPPAR_EPPA5_LEVEL (0x0000)
+#define MCF_EPORT_EPPAR_EPPA5_RISING (0x0400)
+#define MCF_EPORT_EPPAR_EPPA5_FALLING (0x0800)
+#define MCF_EPORT_EPPAR_EPPA5_BOTH (0x0C00)
+#define MCF_EPORT_EPPAR_EPPA4_LEVEL (0x0000)
+#define MCF_EPORT_EPPAR_EPPA4_RISING (0x0100)
+#define MCF_EPORT_EPPAR_EPPA4_FALLING (0x0200)
+#define MCF_EPORT_EPPAR_EPPA4_BOTH (0x0300)
+#define MCF_EPORT_EPPAR_EPPA3_LEVEL (0x0000)
+#define MCF_EPORT_EPPAR_EPPA3_RISING (0x0040)
+#define MCF_EPORT_EPPAR_EPPA3_FALLING (0x0080)
+#define MCF_EPORT_EPPAR_EPPA3_BOTH (0x00C0)
+#define MCF_EPORT_EPPAR_EPPA2_LEVEL (0x0000)
+#define MCF_EPORT_EPPAR_EPPA2_RISING (0x0010)
+#define MCF_EPORT_EPPAR_EPPA2_FALLING (0x0020)
+#define MCF_EPORT_EPPAR_EPPA2_BOTH (0x0030)
+#define MCF_EPORT_EPPAR_EPPA1_LEVEL (0x0000)
+#define MCF_EPORT_EPPAR_EPPA1_RISING (0x0004)
+#define MCF_EPORT_EPPAR_EPPA1_FALLING (0x0008)
+#define MCF_EPORT_EPPAR_EPPA1_BOTH (0x000C)
+
+/* Bit definitions and macros for MCF_EPORT_EPDDR */
+#define MCF_EPORT_EPDDR_EPDD1 (0x02)
+#define MCF_EPORT_EPDDR_EPDD2 (0x04)
+#define MCF_EPORT_EPDDR_EPDD3 (0x08)
+#define MCF_EPORT_EPDDR_EPDD4 (0x10)
+#define MCF_EPORT_EPDDR_EPDD5 (0x20)
+#define MCF_EPORT_EPDDR_EPDD6 (0x40)
+#define MCF_EPORT_EPDDR_EPDD7 (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPIER */
+#define MCF_EPORT_EPIER_EPIE1 (0x02)
+#define MCF_EPORT_EPIER_EPIE2 (0x04)
+#define MCF_EPORT_EPIER_EPIE3 (0x08)
+#define MCF_EPORT_EPIER_EPIE4 (0x10)
+#define MCF_EPORT_EPIER_EPIE5 (0x20)
+#define MCF_EPORT_EPIER_EPIE6 (0x40)
+#define MCF_EPORT_EPIER_EPIE7 (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPDR */
+#define MCF_EPORT_EPDR_EPD1 (0x02)
+#define MCF_EPORT_EPDR_EPD2 (0x04)
+#define MCF_EPORT_EPDR_EPD3 (0x08)
+#define MCF_EPORT_EPDR_EPD4 (0x10)
+#define MCF_EPORT_EPDR_EPD5 (0x20)
+#define MCF_EPORT_EPDR_EPD6 (0x40)
+#define MCF_EPORT_EPDR_EPD7 (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPPDR */
+#define MCF_EPORT_EPPDR_EPPD1 (0x02)
+#define MCF_EPORT_EPPDR_EPPD2 (0x04)
+#define MCF_EPORT_EPPDR_EPPD3 (0x08)
+#define MCF_EPORT_EPPDR_EPPD4 (0x10)
+#define MCF_EPORT_EPPDR_EPPD5 (0x20)
+#define MCF_EPORT_EPPDR_EPPD6 (0x40)
+#define MCF_EPORT_EPPDR_EPPD7 (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPFR */
+#define MCF_EPORT_EPFR_EPF1 (0x02)
+#define MCF_EPORT_EPFR_EPF2 (0x04)
+#define MCF_EPORT_EPFR_EPF3 (0x08)
+#define MCF_EPORT_EPFR_EPF4 (0x10)
+#define MCF_EPORT_EPFR_EPF5 (0x20)
+#define MCF_EPORT_EPFR_EPF6 (0x40)
+#define MCF_EPORT_EPFR_EPF7 (0x80)
+
+/********************************************************************/
+#endif /* m532xsim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m5407sim.h -- ColdFire 5407 System Integration Module support.
+ *
+ * (C) Copyright 2000, Lineo (www.lineo.com)
+ * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd.
+ *
+ * Modified by David W. Miller for the MCF5307 Eval Board.
+ */
+
+/****************************************************************************/
+#ifndef m5407sim_h
+#define m5407sim_h
+/****************************************************************************/
+
+/*
+ * Define the 5407 SIM register set addresses.
+ */
+#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */
+#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/
+#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */
+#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */
+#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */
+#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */
+#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/
+#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/
+#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */
+#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */
+#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */
+#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */
+#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */
+#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */
+#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */
+#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */
+#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */
+#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */
+#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */
+#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */
+#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */
+#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */
+#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
+
+#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */
+#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
+#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */
+#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */
+#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */
+#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */
+#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */
+#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
+
+#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
+
+#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */
+#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */
+
+
+/*
+ * Some symbol defines for the above...
+ */
+#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
+#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
+#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
+#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
+#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
+#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
+#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
+#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
+#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
+
+/*
+ * Macro to set IMR register. It is 32 bits on the 5407.
+ */
+#define mcf_getimr() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define mcf_setimr(imr) \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define mcf_getipr() \
+ *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+
+/*
+ * Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */
+ /* Clear to select par I/O */
+#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */
+ /* Clear to select par I/O */
+
+/*
+ * Defines for the IRQPAR Register
+ */
+#define IRQ5_LEVEL4 0x80
+#define IRQ3_LEVEL6 0x40
+#define IRQ1_LEVEL2 0x20
+
+
+/*
+ * Define the Cache register flags.
+ */
+#define CACR_DEC 0x80000000 /* Enable data cache */
+#define CACR_DWP 0x40000000 /* Data write protection */
+#define CACR_DESB 0x20000000 /* Enable data store buffer */
+#define CACR_DDPI 0x10000000 /* Disable CPUSHL */
+#define CACR_DHCLK 0x08000000 /* Half data cache lock mode */
+#define CACR_DDCM_WT 0x00000000 /* Write through cache*/
+#define CACR_DDCM_CP 0x02000000 /* Copyback cache */
+#define CACR_DDCM_P 0x04000000 /* No cache, precise */
+#define CACR_DDCM_IMP 0x06000000 /* No cache, imprecise */
+#define CACR_DCINVA 0x01000000 /* Invalidate data cache */
+#define CACR_BEC 0x00080000 /* Enable branch cache */
+#define CACR_BCINVA 0x00040000 /* Invalidate branch cache */
+#define CACR_IEC 0x00008000 /* Enable instruction cache */
+#define CACR_DNFB 0x00002000 /* Inhibited fill buffer */
+#define CACR_IDPI 0x00001000 /* Disable CPUSHL */
+#define CACR_IHLCK 0x00000800 /* Intruction cache half lock */
+#define CACR_IDCM 0x00000400 /* Intruction cache inhibit */
+#define CACR_ICINVA 0x00000100 /* Invalidate instr cache */
+
+#define ACR_BASE_POS 24 /* Address Base */
+#define ACR_MASK_POS 16 /* Address Mask */
+#define ACR_ENABLE 0x00008000 /* Enable address */
+#define ACR_USER 0x00000000 /* User mode access only */
+#define ACR_SUPER 0x00002000 /* Supervisor mode only */
+#define ACR_ANY 0x00004000 /* Match any access mode */
+#define ACR_CM_WT 0x00000000 /* Write through mode */
+#define ACR_CM_CP 0x00000020 /* Copyback mode */
+#define ACR_CM_OFF_PRE 0x00000040 /* No cache, precise */
+#define ACR_CM_OFF_IMP 0x00000060 /* No cache, imprecise */
+#define ACR_WPROTECT 0x00000004 /* Write protect */
+
+/****************************************************************************/
+#endif /* m5407sim_h */
--- /dev/null
+#include "m68360_regs.h"
+#include "m68360_pram.h"
+#include "m68360_quicc.h"
+#include "m68360_enet.h"
+
+#ifdef CONFIG_M68360
+
+#define CPM_INTERRUPT 4
+
+/* see MC68360 User's Manual, p. 7-377 */
+#define CPM_VECTOR_BASE 0x04 /* 3 MSbits of CPM vector */
+
+#endif /* CONFIG_M68360 */
--- /dev/null
+/***********************************
+ * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions for the ETHERNET controllers
+ ***************************************
+ */
+
+#ifndef __ETHER_H
+#define __ETHER_H
+
+#include "quicc_simple.h"
+
+/*
+ * transmit BD's
+ */
+#define T_R 0x8000 /* ready bit */
+#define E_T_PAD 0x4000 /* short frame padding */
+#define T_W 0x2000 /* wrap bit */
+#define T_I 0x1000 /* interrupt on completion */
+#define T_L 0x0800 /* last in frame */
+#define T_TC 0x0400 /* transmit CRC (when last) */
+
+#define T_DEF 0x0200 /* defer indication */
+#define T_HB 0x0100 /* heartbeat */
+#define T_LC 0x0080 /* error: late collision */
+#define T_RL 0x0040 /* error: retransmission limit */
+#define T_RC 0x003c /* retry count */
+#define T_UN 0x0002 /* error: underrun */
+#define T_CSL 0x0001 /* carier sense lost */
+#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL)
+
+/*
+ * receive BD's
+ */
+#define R_E 0x8000 /* buffer empty */
+#define R_W 0x2000 /* wrap bit */
+#define R_I 0x1000 /* interrupt on reception */
+#define R_L 0x0800 /* last BD in frame */
+#define R_F 0x0400 /* first BD in frame */
+#define R_M 0x0100 /* received because of promisc. mode */
+
+#define R_LG 0x0020 /* frame too long */
+#define R_NO 0x0010 /* non-octet aligned */
+#define R_SH 0x0008 /* short frame */
+#define R_CR 0x0004 /* receive CRC error */
+#define R_OV 0x0002 /* receive overrun */
+#define R_CL 0x0001 /* collision */
+#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL)
+
+
+/*
+ * ethernet interrupts
+ */
+#define ETHERNET_GRA 0x0080 /* graceful stop complete */
+#define ETHERNET_TXE 0x0010 /* transmit error */
+#define ETHERNET_RXF 0x0008 /* receive frame */
+#define ETHERNET_BSY 0x0004 /* busy condition */
+#define ETHERNET_TXB 0x0002 /* transmit buffer */
+#define ETHERNET_RXB 0x0001 /* receive buffer */
+
+/*
+ * ethernet protocol specific mode register (PSMR)
+ */
+#define ETHER_HBC 0x8000 /* heartbeat checking */
+#define ETHER_FC 0x4000 /* force collision */
+#define ETHER_RSH 0x2000 /* receive short frames */
+#define ETHER_IAM 0x1000 /* individual address mode */
+#define ETHER_CRC_32 (0x2<<10) /* Enable CRC */
+#define ETHER_PRO 0x0200 /* promiscuous */
+#define ETHER_BRO 0x0100 /* broadcast address */
+#define ETHER_SBT 0x0080 /* stop backoff timer */
+#define ETHER_LPB 0x0040 /* Loop Back Mode */
+#define ETHER_SIP 0x0020 /* sample input pins */
+#define ETHER_LCW 0x0010 /* late collision window */
+#define ETHER_NIB_13 (0x0<<1) /* # of ignored bits 13 */
+#define ETHER_NIB_14 (0x1<<1) /* # of ignored bits 14 */
+#define ETHER_NIB_15 (0x2<<1) /* # of ignored bits 15 */
+#define ETHER_NIB_16 (0x3<<1) /* # of ignored bits 16 */
+#define ETHER_NIB_21 (0x4<<1) /* # of ignored bits 21 */
+#define ETHER_NIB_22 (0x5<<1) /* # of ignored bits 22 */
+#define ETHER_NIB_23 (0x6<<1) /* # of ignored bits 23 */
+#define ETHER_NIB_24 (0x7<<1) /* # of ignored bits 24 */
+
+/*
+ * ethernet specific parameters
+ */
+#define CRC_WORD 4 /* Length in bytes of CRC */
+#define C_PRES 0xffffffff /* preform 32 bit CRC */
+#define C_MASK 0xdebb20e3 /* comply with 32 bit CRC */
+#define CRCEC 0x00000000
+#define ALEC 0x00000000
+#define DISFC 0x00000000
+#define PADS 0x00000000
+#define RET_LIM 0x000f /* retry 15 times to send a frame before interrupt */
+#define ETH_MFLR 0x05ee /* 1518 max frame size */
+#define MINFLR 0x0040 /* Minimum frame size 64 */
+#define MAXD1 0x05ee /* Max dma count 1518 */
+#define MAXD2 0x05ee
+#define GADDR1 0x00000000 /* Clear group address */
+#define GADDR2 0x00000000
+#define GADDR3 0x00000000
+#define GADDR4 0x00000000
+#define P_PER 0x00000000 /*not used */
+#define IADDR1 0x00000000 /* Individual hash table not used */
+#define IADDR2 0x00000000
+#define IADDR3 0x00000000
+#define IADDR4 0x00000000
+#define TADDR_H 0x00000000 /* clear this regs */
+#define TADDR_M 0x00000000
+#define TADDR_L 0x00000000
+
+/* SCC Parameter Ram */
+#define RFCR 0x18 /* normal operation */
+#define TFCR 0x18 /* normal operation */
+#define E_MRBLR 1518 /* Max ethernet frame length */
+
+/*
+ * ethernet specific structure
+ */
+typedef union {
+ unsigned char b[6];
+ struct {
+ unsigned short high;
+ unsigned short middl;
+ unsigned short low;
+ } w;
+} ETHER_ADDR;
+
+typedef struct {
+ int max_frame_length;
+ int promisc_mode;
+ int reject_broadcast;
+ ETHER_ADDR phys_adr;
+} ETHER_SPECIFIC;
+
+typedef struct {
+ ETHER_ADDR dst_addr;
+ ETHER_ADDR src_addr;
+ unsigned short type_or_len;
+ unsigned char data[1];
+} ETHER_FRAME;
+
+#define MAX_DATALEN 1500
+typedef struct {
+ ETHER_ADDR dst_addr;
+ ETHER_ADDR src_addr;
+ unsigned short type_or_len;
+ unsigned char data[MAX_DATALEN];
+ unsigned char fcs[CRC_WORD];
+} ETHER_MAX_FRAME;
+
+
+/*
+ * Internal ethernet function prototypes
+ */
+void ether_interrupt(int scc_num);
+/* mleslie: debug */
+/* static void ethernet_rx_internal(int scc_num); */
+/* static void ethernet_tx_internal(int scc_num); */
+
+/*
+ * User callable routines prototypes (ethernet specific)
+ */
+void ethernet_init(int scc_number,
+ alloc_routine *alloc_buffer,
+ free_routine *free_buffer,
+ store_rx_buffer_routine *store_rx_buffer,
+ handle_tx_error_routine *handle_tx_error,
+ handle_rx_error_routine *handle_rx_error,
+ handle_lost_error_routine *handle_lost_error,
+ ETHER_SPECIFIC *ether_spec);
+int ethernet_tx(int scc_number, void *buf, int length);
+
+#endif
+
--- /dev/null
+/***********************************
+ * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of the parameter area RAM.
+ * Note that different structures are overlaid
+ * at the same offsets for the different modes
+ * of operation.
+ ***************************************
+ */
+
+#ifndef __PRAM_H
+#define __PRAM_H
+
+/* Time slot assignment table */
+#define VALID_SLOT 0x8000
+#define WRAP_SLOT 0x4000
+
+/*****************************************************************
+ Global Multichannel parameter RAM
+*****************************************************************/
+struct global_multi_pram {
+ /*
+ * Global Multichannel parameter RAM
+ */
+ unsigned long mcbase; /* Multichannel Base pointer */
+ unsigned short qmcstate; /* Multichannel Controller state */
+ unsigned short mrblr; /* Maximum Receive Buffer Length */
+ unsigned short tx_s_ptr; /* TSTATx Pointer */
+ unsigned short rxptr; /* Current Time slot entry in TSATRx */
+ unsigned short grfthr; /* Global Receive frame threshold */
+ unsigned short grfcnt; /* Global Receive Frame Count */
+ unsigned long intbase; /* Multichannel Base address */
+ unsigned long iintptr; /* Pointer to interrupt queue */
+ unsigned short rx_s_ptr; /* TSTARx Pointer */
+
+ unsigned short txptr; /* Current Time slot entry in TSATTx */
+ unsigned long c_mask32; /* CRC Constant (debb20e3) */
+ unsigned short tsatrx[32]; /* Time Slot Assignment Table Rx */
+ unsigned short tsattx[32]; /* Time Slot Assignment Table Tx */
+ unsigned short c_mask16; /* CRC Constant (f0b8) */
+};
+
+/*****************************************************************
+ Quicc32 HDLC parameter RAM
+*****************************************************************/
+struct quicc32_pram {
+
+ unsigned short tbase; /* Tx Buffer Descriptors Base Address */
+ unsigned short chamr; /* Channel Mode Register */
+ unsigned long tstate; /* Tx Internal State */
+ unsigned long txintr; /* Tx Internal Data Pointer */
+ unsigned short tbptr; /* Tx Buffer Descriptor Pointer */
+ unsigned short txcntr; /* Tx Internal Byte Count */
+ unsigned long tupack; /* (Tx Temp) */
+ unsigned long zistate; /* Zero Insertion machine state */
+ unsigned long tcrc; /* Temp Transmit CRC */
+ unsigned short intmask; /* Channel's interrupt mask flags */
+ unsigned short bdflags;
+ unsigned short rbase; /* Rx Buffer Descriptors Base Address */
+ unsigned short mflr; /* Max Frame Length Register */
+ unsigned long rstate; /* Rx Internal State */
+ unsigned long rxintr; /* Rx Internal Data Pointer */
+ unsigned short rbptr; /* Rx Buffer Descriptor Pointer */
+ unsigned short rxbyc; /* Rx Internal Byte Count */
+ unsigned long rpack; /* (Rx Temp) */
+ unsigned long zdstate; /* Zero Deletion machine state */
+ unsigned long rcrc; /* Temp Transmit CRC */
+ unsigned short maxc; /* Max_length counter */
+ unsigned short tmp_mb; /* Temp */
+};
+
+
+/*****************************************************************
+ HDLC parameter RAM
+*****************************************************************/
+
+struct hdlc_pram {
+ /*
+ * SCC parameter RAM
+ */
+ unsigned short rbase; /* RX BD base address */
+ unsigned short tbase; /* TX BD base address */
+ unsigned char rfcr; /* Rx function code */
+ unsigned char tfcr; /* Tx function code */
+ unsigned short mrblr; /* Rx buffer length */
+ unsigned long rstate; /* Rx internal state */
+ unsigned long rptr; /* Rx internal data pointer */
+ unsigned short rbptr; /* rb BD Pointer */
+ unsigned short rcount; /* Rx internal byte count */
+ unsigned long rtemp; /* Rx temp */
+ unsigned long tstate; /* Tx internal state */
+ unsigned long tptr; /* Tx internal data pointer */
+ unsigned short tbptr; /* Tx BD pointer */
+ unsigned short tcount; /* Tx byte count */
+ unsigned long ttemp; /* Tx temp */
+ unsigned long rcrc; /* temp receive CRC */
+ unsigned long tcrc; /* temp transmit CRC */
+
+ /*
+ * HDLC specific parameter RAM
+ */
+ unsigned char RESERVED1[4]; /* Reserved area */
+ unsigned long c_mask; /* CRC constant */
+ unsigned long c_pres; /* CRC preset */
+ unsigned short disfc; /* discarded frame counter */
+ unsigned short crcec; /* CRC error counter */
+ unsigned short abtsc; /* abort sequence counter */
+ unsigned short nmarc; /* nonmatching address rx cnt */
+ unsigned short retrc; /* frame retransmission cnt */
+ unsigned short mflr; /* maximum frame length reg */
+ unsigned short max_cnt; /* maximum length counter */
+ unsigned short rfthr; /* received frames threshold */
+ unsigned short rfcnt; /* received frames count */
+ unsigned short hmask; /* user defined frm addr mask */
+ unsigned short haddr1; /* user defined frm address 1 */
+ unsigned short haddr2; /* user defined frm address 2 */
+ unsigned short haddr3; /* user defined frm address 3 */
+ unsigned short haddr4; /* user defined frm address 4 */
+ unsigned short tmp; /* temp */
+ unsigned short tmp_mb; /* temp */
+};
+
+
+
+/*****************************************************************
+ UART parameter RAM
+*****************************************************************/
+
+/*
+ * bits in uart control characters table
+ */
+#define CC_INVALID 0x8000 /* control character is valid */
+#define CC_REJ 0x4000 /* don't store char in buffer */
+#define CC_CHAR 0x00ff /* control character */
+
+/* UART */
+struct uart_pram {
+ /*
+ * SCC parameter RAM
+ */
+ unsigned short rbase; /* RX BD base address */
+ unsigned short tbase; /* TX BD base address */
+ unsigned char rfcr; /* Rx function code */
+ unsigned char tfcr; /* Tx function code */
+ unsigned short mrblr; /* Rx buffer length */
+ unsigned long rstate; /* Rx internal state */
+ unsigned long rptr; /* Rx internal data pointer */
+ unsigned short rbptr; /* rb BD Pointer */
+ unsigned short rcount; /* Rx internal byte count */
+ unsigned long rx_temp; /* Rx temp */
+ unsigned long tstate; /* Tx internal state */
+ unsigned long tptr; /* Tx internal data pointer */
+ unsigned short tbptr; /* Tx BD pointer */
+ unsigned short tcount; /* Tx byte count */
+ unsigned long ttemp; /* Tx temp */
+ unsigned long rcrc; /* temp receive CRC */
+ unsigned long tcrc; /* temp transmit CRC */
+
+ /*
+ * UART specific parameter RAM
+ */
+ unsigned char RESERVED1[8]; /* Reserved area */
+ unsigned short max_idl; /* maximum idle characters */
+ unsigned short idlc; /* rx idle counter (internal) */
+ unsigned short brkcr; /* break count register */
+
+ unsigned short parec; /* Rx parity error counter */
+ unsigned short frmer; /* Rx framing error counter */
+ unsigned short nosec; /* Rx noise counter */
+ unsigned short brkec; /* Rx break character counter */
+ unsigned short brkln; /* Reaceive break length */
+
+ unsigned short uaddr1; /* address character 1 */
+ unsigned short uaddr2; /* address character 2 */
+ unsigned short rtemp; /* temp storage */
+ unsigned short toseq; /* Tx out of sequence char */
+ unsigned short cc[8]; /* Rx control characters */
+ unsigned short rccm; /* Rx control char mask */
+ unsigned short rccr; /* Rx control char register */
+ unsigned short rlbc; /* Receive last break char */
+};
+
+
+
+/*****************************************************************
+ BISYNC parameter RAM
+*****************************************************************/
+
+struct bisync_pram {
+ /*
+ * SCC parameter RAM
+ */
+ unsigned short rbase; /* RX BD base address */
+ unsigned short tbase; /* TX BD base address */
+ unsigned char rfcr; /* Rx function code */
+ unsigned char tfcr; /* Tx function code */
+ unsigned short mrblr; /* Rx buffer length */
+ unsigned long rstate; /* Rx internal state */
+ unsigned long rptr; /* Rx internal data pointer */
+ unsigned short rbptr; /* rb BD Pointer */
+ unsigned short rcount; /* Rx internal byte count */
+ unsigned long rtemp; /* Rx temp */
+ unsigned long tstate; /* Tx internal state */
+ unsigned long tptr; /* Tx internal data pointer */
+ unsigned short tbptr; /* Tx BD pointer */
+ unsigned short tcount; /* Tx byte count */
+ unsigned long ttemp; /* Tx temp */
+ unsigned long rcrc; /* temp receive CRC */
+ unsigned long tcrc; /* temp transmit CRC */
+
+ /*
+ * BISYNC specific parameter RAM
+ */
+ unsigned char RESERVED1[4]; /* Reserved area */
+ unsigned long crcc; /* CRC Constant Temp Value */
+ unsigned short prcrc; /* Preset Receiver CRC-16/LRC */
+ unsigned short ptcrc; /* Preset Transmitter CRC-16/LRC */
+ unsigned short parec; /* Receive Parity Error Counter */
+ unsigned short bsync; /* BISYNC SYNC Character */
+ unsigned short bdle; /* BISYNC DLE Character */
+ unsigned short cc[8]; /* Rx control characters */
+ unsigned short rccm; /* Receive Control Character Mask */
+};
+
+/*****************************************************************
+ IOM2 parameter RAM
+ (overlaid on tx bd[5] of SCC channel[2])
+*****************************************************************/
+struct iom2_pram {
+ unsigned short ci_data; /* ci data */
+ unsigned short monitor_data; /* monitor data */
+ unsigned short tstate; /* transmitter state */
+ unsigned short rstate; /* receiver state */
+};
+
+/*****************************************************************
+ SPI/SMC parameter RAM
+ (overlaid on tx bd[6,7] of SCC channel[2])
+*****************************************************************/
+
+#define SPI_R 0x8000 /* Ready bit in BD */
+
+struct spi_pram {
+ unsigned short rbase; /* Rx BD Base Address */
+ unsigned short tbase; /* Tx BD Base Address */
+ unsigned char rfcr; /* Rx function code */
+ unsigned char tfcr; /* Tx function code */
+ unsigned short mrblr; /* Rx buffer length */
+ unsigned long rstate; /* Rx internal state */
+ unsigned long rptr; /* Rx internal data pointer */
+ unsigned short rbptr; /* rb BD Pointer */
+ unsigned short rcount; /* Rx internal byte count */
+ unsigned long rtemp; /* Rx temp */
+ unsigned long tstate; /* Tx internal state */
+ unsigned long tptr; /* Tx internal data pointer */
+ unsigned short tbptr; /* Tx BD pointer */
+ unsigned short tcount; /* Tx byte count */
+ unsigned long ttemp; /* Tx temp */
+};
+
+struct smc_uart_pram {
+ unsigned short rbase; /* Rx BD Base Address */
+ unsigned short tbase; /* Tx BD Base Address */
+ unsigned char rfcr; /* Rx function code */
+ unsigned char tfcr; /* Tx function code */
+ unsigned short mrblr; /* Rx buffer length */
+ unsigned long rstate; /* Rx internal state */
+ unsigned long rptr; /* Rx internal data pointer */
+ unsigned short rbptr; /* rb BD Pointer */
+ unsigned short rcount; /* Rx internal byte count */
+ unsigned long rtemp; /* Rx temp */
+ unsigned long tstate; /* Tx internal state */
+ unsigned long tptr; /* Tx internal data pointer */
+ unsigned short tbptr; /* Tx BD pointer */
+ unsigned short tcount; /* Tx byte count */
+ unsigned long ttemp; /* Tx temp */
+ unsigned short max_idl; /* Maximum IDLE Characters */
+ unsigned short idlc; /* Temporary IDLE Counter */
+ unsigned short brkln; /* Last Rx Break Length */
+ unsigned short brkec; /* Rx Break Condition Counter */
+ unsigned short brkcr; /* Break Count Register (Tx) */
+ unsigned short r_mask; /* Temporary bit mask */
+};
+
+struct smc_trnsp_pram {
+ unsigned short rbase; /* rx BD Base Address */
+ unsigned short tbase; /* Tx BD Base Address */
+ unsigned char rfcr; /* Rx function code */
+ unsigned char tfcr; /* Tx function code */
+ unsigned short mrblr; /* Rx buffer length */
+ unsigned long rstate; /* Rx internal state */
+ unsigned long rptr; /* Rx internal data pointer */
+ unsigned short rbptr; /* rb BD Pointer */
+ unsigned short rcount; /* Rx internal byte count */
+ unsigned long rtemp; /* Rx temp */
+ unsigned long tstate; /* Tx internal state */
+ unsigned long tptr; /* Tx internal data pointer */
+ unsigned short tbptr; /* Tx BD pointer */
+ unsigned short tcount; /* Tx byte count */
+ unsigned long ttemp; /* Tx temp */
+ unsigned short reserved[5]; /* Reserved */
+};
+
+struct idma_pram {
+ unsigned short ibase; /* IDMA BD Base Address */
+ unsigned short ibptr; /* IDMA buffer descriptor pointer */
+ unsigned long istate; /* IDMA internal state */
+ unsigned long itemp; /* IDMA temp */
+};
+
+struct ethernet_pram {
+ /*
+ * SCC parameter RAM
+ */
+ unsigned short rbase; /* RX BD base address */
+ unsigned short tbase; /* TX BD base address */
+ unsigned char rfcr; /* Rx function code */
+ unsigned char tfcr; /* Tx function code */
+ unsigned short mrblr; /* Rx buffer length */
+ unsigned long rstate; /* Rx internal state */
+ unsigned long rptr; /* Rx internal data pointer */
+ unsigned short rbptr; /* rb BD Pointer */
+ unsigned short rcount; /* Rx internal byte count */
+ unsigned long rtemp; /* Rx temp */
+ unsigned long tstate; /* Tx internal state */
+ unsigned long tptr; /* Tx internal data pointer */
+ unsigned short tbptr; /* Tx BD pointer */
+ unsigned short tcount; /* Tx byte count */
+ unsigned long ttemp; /* Tx temp */
+ unsigned long rcrc; /* temp receive CRC */
+ unsigned long tcrc; /* temp transmit CRC */
+
+ /*
+ * ETHERNET specific parameter RAM
+ */
+ unsigned long c_pres; /* preset CRC */
+ unsigned long c_mask; /* constant mask for CRC */
+ unsigned long crcec; /* CRC error counter */
+ unsigned long alec; /* alighnment error counter */
+ unsigned long disfc; /* discard frame counter */
+ unsigned short pads; /* short frame PAD characters */
+ unsigned short ret_lim; /* retry limit threshold */
+ unsigned short ret_cnt; /* retry limit counter */
+ unsigned short mflr; /* maximum frame length reg */
+ unsigned short minflr; /* minimum frame length reg */
+ unsigned short maxd1; /* maximum DMA1 length reg */
+ unsigned short maxd2; /* maximum DMA2 length reg */
+ unsigned short maxd; /* rx max DMA */
+ unsigned short dma_cnt; /* rx dma counter */
+ unsigned short max_b; /* max bd byte count */
+ unsigned short gaddr1; /* group address filter 1 */
+ unsigned short gaddr2; /* group address filter 2 */
+ unsigned short gaddr3; /* group address filter 3 */
+ unsigned short gaddr4; /* group address filter 4 */
+ unsigned long tbuf0_data0; /* save area 0 - current frm */
+ unsigned long tbuf0_data1; /* save area 1 - current frm */
+ unsigned long tbuf0_rba0;
+ unsigned long tbuf0_crc;
+ unsigned short tbuf0_bcnt;
+ union {
+ unsigned char b[6];
+ struct {
+ unsigned short high;
+ unsigned short middl;
+ unsigned short low;
+ } w;
+ } paddr;
+ unsigned short p_per; /* persistence */
+ unsigned short rfbd_ptr; /* rx first bd pointer */
+ unsigned short tfbd_ptr; /* tx first bd pointer */
+ unsigned short tlbd_ptr; /* tx last bd pointer */
+ unsigned long tbuf1_data0; /* save area 0 - next frame */
+ unsigned long tbuf1_data1; /* save area 1 - next frame */
+ unsigned long tbuf1_rba0;
+ unsigned long tbuf1_crc;
+ unsigned short tbuf1_bcnt;
+ unsigned short tx_len; /* tx frame length counter */
+ unsigned short iaddr1; /* individual address filter 1*/
+ unsigned short iaddr2; /* individual address filter 2*/
+ unsigned short iaddr3; /* individual address filter 3*/
+ unsigned short iaddr4; /* individual address filter 4*/
+ unsigned short boff_cnt; /* back-off counter */
+ unsigned short taddr_h; /* temp address (MSB) */
+ unsigned short taddr_m; /* temp address */
+ unsigned short taddr_l; /* temp address (LSB) */
+};
+
+struct transparent_pram {
+ /*
+ * SCC parameter RAM
+ */
+ unsigned short rbase; /* RX BD base address */
+ unsigned short tbase; /* TX BD base address */
+ unsigned char rfcr; /* Rx function code */
+ unsigned char tfcr; /* Tx function code */
+ unsigned short mrblr; /* Rx buffer length */
+ unsigned long rstate; /* Rx internal state */
+ unsigned long rptr; /* Rx internal data pointer */
+ unsigned short rbptr; /* rb BD Pointer */
+ unsigned short rcount; /* Rx internal byte count */
+ unsigned long rtemp; /* Rx temp */
+ unsigned long tstate; /* Tx internal state */
+ unsigned long tptr; /* Tx internal data pointer */
+ unsigned short tbptr; /* Tx BD pointer */
+ unsigned short tcount; /* Tx byte count */
+ unsigned long ttemp; /* Tx temp */
+ unsigned long rcrc; /* temp receive CRC */
+ unsigned long tcrc; /* temp transmit CRC */
+
+ /*
+ * TRANSPARENT specific parameter RAM
+ */
+ unsigned long crc_p; /* CRC Preset */
+ unsigned long crc_c; /* CRC constant */
+};
+
+struct timer_pram {
+ /*
+ * RISC timers parameter RAM
+ */
+ unsigned short tm_base; /* RISC timer table base adr */
+ unsigned short tm_ptr; /* RISC timer table pointer */
+ unsigned short r_tmr; /* RISC timer mode register */
+ unsigned short r_tmv; /* RISC timer valid register */
+ unsigned long tm_cmd; /* RISC timer cmd register */
+ unsigned long tm_cnt; /* RISC timer internal cnt */
+};
+
+#endif
--- /dev/null
+/***********************************
+ * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of QUICC memory structures
+ ***************************************
+ */
+
+#ifndef __M68360_QUICC_H
+#define __M68360_QUICC_H
+
+/*
+ * include registers and
+ * parameter ram definitions files
+ */
+#include <asm/m68360_regs.h>
+#include <asm/m68360_pram.h>
+
+
+
+/* Buffer Descriptors */
+typedef struct quicc_bd {
+ volatile unsigned short status;
+ volatile unsigned short length;
+ volatile unsigned char *buf; /* WARNING: This is only true if *char is 32 bits */
+} QUICC_BD;
+
+
+#ifdef MOTOROLA_ORIGINAL
+struct user_data {
+ /* BASE + 0x000: user data memory */
+ volatile unsigned char udata_bd_ucode[0x400]; /*user data bd's Ucode*/
+ volatile unsigned char udata_bd[0x200]; /*user data Ucode */
+ volatile unsigned char ucode_ext[0x100]; /*Ucode Extention ram */
+ volatile unsigned char RESERVED1[0x500]; /* Reserved area */
+};
+#else
+struct user_data {
+ /* BASE + 0x000: user data memory */
+ volatile unsigned char udata_bd_ucode[0x400]; /* user data, bds, Ucode*/
+ volatile unsigned char udata_bd1[0x200]; /* user, bds */
+ volatile unsigned char ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */
+ volatile unsigned char udata_bd2[0x100]; /* user, bds */
+ volatile unsigned char RESERVED1[0x400]; /* Reserved area */
+};
+#endif
+
+
+/*
+ * internal ram
+ */
+typedef struct quicc {
+ union {
+ struct quicc32_pram ch_pram_tbl[32]; /* 32*64(bytes) per channel */
+ struct user_data u;
+ }ch_or_u; /* multipul or user space */
+
+ /* BASE + 0xc00: PARAMETER RAM */
+ union {
+ struct scc_pram {
+ union {
+ struct hdlc_pram h;
+ struct uart_pram u;
+ struct bisync_pram b;
+ struct transparent_pram t;
+ unsigned char RESERVED66[0x70];
+ } pscc; /* scc parameter area (protocol dependent) */
+ union {
+ struct {
+ unsigned char RESERVED70[0x10];
+ struct spi_pram spi;
+ unsigned char RESERVED72[0x8];
+ struct timer_pram timer;
+ } timer_spi;
+ struct {
+ struct idma_pram idma;
+ unsigned char RESERVED67[0x4];
+ union {
+ struct smc_uart_pram u;
+ struct smc_trnsp_pram t;
+ } psmc;
+ } idma_smc;
+ } pothers;
+ } scc;
+ struct ethernet_pram enet_scc;
+ struct global_multi_pram m;
+ unsigned char pr[0x100];
+ } pram[4];
+
+ /* reserved */
+
+ /* BASE + 0x1000: INTERNAL REGISTERS */
+ /* SIM */
+ volatile unsigned long sim_mcr; /* module configuration reg */
+ volatile unsigned short sim_simtr; /* module test register */
+ volatile unsigned char RESERVED2[0x2]; /* Reserved area */
+ volatile unsigned char sim_avr; /* auto vector reg */
+ volatile unsigned char sim_rsr; /* reset status reg */
+ volatile unsigned char RESERVED3[0x2]; /* Reserved area */
+ volatile unsigned char sim_clkocr; /* CLCO control register */
+ volatile unsigned char RESERVED62[0x3]; /* Reserved area */
+ volatile unsigned short sim_pllcr; /* PLL control register */
+ volatile unsigned char RESERVED63[0x2]; /* Reserved area */
+ volatile unsigned short sim_cdvcr; /* Clock devider control register */
+ volatile unsigned short sim_pepar; /* Port E pin assignment register */
+ volatile unsigned char RESERVED64[0xa]; /* Reserved area */
+ volatile unsigned char sim_sypcr; /* system protection control*/
+ volatile unsigned char sim_swiv; /* software interrupt vector*/
+ volatile unsigned char RESERVED6[0x2]; /* Reserved area */
+ volatile unsigned short sim_picr; /* periodic interrupt control reg */
+ volatile unsigned char RESERVED7[0x2]; /* Reserved area */
+ volatile unsigned short sim_pitr; /* periodic interrupt timing reg */
+ volatile unsigned char RESERVED8[0x3]; /* Reserved area */
+ volatile unsigned char sim_swsr; /* software service */
+ volatile unsigned long sim_bkar; /* breakpoint address register*/
+ volatile unsigned long sim_bkcr; /* breakpoint control register*/
+ volatile unsigned char RESERVED10[0x8]; /* Reserved area */
+ /* MEMC */
+ volatile unsigned long memc_gmr; /* Global memory register */
+ volatile unsigned short memc_mstat; /* MEMC status register */
+ volatile unsigned char RESERVED11[0xa]; /* Reserved area */
+ volatile unsigned long memc_br0; /* base register 0 */
+ volatile unsigned long memc_or0; /* option register 0 */
+ volatile unsigned char RESERVED12[0x8]; /* Reserved area */
+ volatile unsigned long memc_br1; /* base register 1 */
+ volatile unsigned long memc_or1; /* option register 1 */
+ volatile unsigned char RESERVED13[0x8]; /* Reserved area */
+ volatile unsigned long memc_br2; /* base register 2 */
+ volatile unsigned long memc_or2; /* option register 2 */
+ volatile unsigned char RESERVED14[0x8]; /* Reserved area */
+ volatile unsigned long memc_br3; /* base register 3 */
+ volatile unsigned long memc_or3; /* option register 3 */
+ volatile unsigned char RESERVED15[0x8]; /* Reserved area */
+ volatile unsigned long memc_br4; /* base register 3 */
+ volatile unsigned long memc_or4; /* option register 3 */
+ volatile unsigned char RESERVED16[0x8]; /* Reserved area */
+ volatile unsigned long memc_br5; /* base register 3 */
+ volatile unsigned long memc_or5; /* option register 3 */
+ volatile unsigned char RESERVED17[0x8]; /* Reserved area */
+ volatile unsigned long memc_br6; /* base register 3 */
+ volatile unsigned long memc_or6; /* option register 3 */
+ volatile unsigned char RESERVED18[0x8]; /* Reserved area */
+ volatile unsigned long memc_br7; /* base register 3 */
+ volatile unsigned long memc_or7; /* option register 3 */
+ volatile unsigned char RESERVED9[0x28]; /* Reserved area */
+ /* TEST */
+ volatile unsigned short test_tstmra; /* master shift a */
+ volatile unsigned short test_tstmrb; /* master shift b */
+ volatile unsigned short test_tstsc; /* shift count */
+ volatile unsigned short test_tstrc; /* repetition counter */
+ volatile unsigned short test_creg; /* control */
+ volatile unsigned short test_dreg; /* destributed register */
+ volatile unsigned char RESERVED58[0x404]; /* Reserved area */
+ /* IDMA1 */
+ volatile unsigned short idma_iccr; /* channel configuration reg*/
+ volatile unsigned char RESERVED19[0x2]; /* Reserved area */
+ volatile unsigned short idma1_cmr; /* dma mode reg */
+ volatile unsigned char RESERVED68[0x2]; /* Reserved area */
+ volatile unsigned long idma1_sapr; /* dma source addr ptr */
+ volatile unsigned long idma1_dapr; /* dma destination addr ptr */
+ volatile unsigned long idma1_bcr; /* dma byte count reg */
+ volatile unsigned char idma1_fcr; /* function code reg */
+ volatile unsigned char RESERVED20; /* Reserved area */
+ volatile unsigned char idma1_cmar; /* channel mask reg */
+ volatile unsigned char RESERVED21; /* Reserved area */
+ volatile unsigned char idma1_csr; /* channel status reg */
+ volatile unsigned char RESERVED22[0x3]; /* Reserved area */
+ /* SDMA */
+ volatile unsigned char sdma_sdsr; /* status reg */
+ volatile unsigned char RESERVED23; /* Reserved area */
+ volatile unsigned short sdma_sdcr; /* configuration reg */
+ volatile unsigned long sdma_sdar; /* address reg */
+ /* IDMA2 */
+ volatile unsigned char RESERVED69[0x2]; /* Reserved area */
+ volatile unsigned short idma2_cmr; /* dma mode reg */
+ volatile unsigned long idma2_sapr; /* dma source addr ptr */
+ volatile unsigned long idma2_dapr; /* dma destination addr ptr */
+ volatile unsigned long idma2_bcr; /* dma byte count reg */
+ volatile unsigned char idma2_fcr; /* function code reg */
+ volatile unsigned char RESERVED24; /* Reserved area */
+ volatile unsigned char idma2_cmar; /* channel mask reg */
+ volatile unsigned char RESERVED25; /* Reserved area */
+ volatile unsigned char idma2_csr; /* channel status reg */
+ volatile unsigned char RESERVED26[0x7]; /* Reserved area */
+ /* Interrupt Controller */
+ volatile unsigned long intr_cicr; /* CP interrupt configuration reg*/
+ volatile unsigned long intr_cipr; /* CP interrupt pending reg */
+ volatile unsigned long intr_cimr; /* CP interrupt mask reg */
+ volatile unsigned long intr_cisr; /* CP interrupt in service reg*/
+ /* Parallel I/O */
+ volatile unsigned short pio_padir; /* port A data direction reg */
+ volatile unsigned short pio_papar; /* port A pin assignment reg */
+ volatile unsigned short pio_paodr; /* port A open drain reg */
+ volatile unsigned short pio_padat; /* port A data register */
+ volatile unsigned char RESERVED28[0x8]; /* Reserved area */
+ volatile unsigned short pio_pcdir; /* port C data direction reg*/
+ volatile unsigned short pio_pcpar; /* port C pin assignment reg*/
+ volatile unsigned short pio_pcso; /* port C special options */
+ volatile unsigned short pio_pcdat; /* port C data register */
+ volatile unsigned short pio_pcint; /* port C interrupt cntrl reg */
+ volatile unsigned char RESERVED29[0x16]; /* Reserved area */
+ /* Timer */
+ volatile unsigned short timer_tgcr; /* timer global configuration reg */
+ volatile unsigned char RESERVED30[0xe]; /* Reserved area */
+ volatile unsigned short timer_tmr1; /* timer 1 mode reg */
+ volatile unsigned short timer_tmr2; /* timer 2 mode reg */
+ volatile unsigned short timer_trr1; /* timer 1 referance reg */
+ volatile unsigned short timer_trr2; /* timer 2 referance reg */
+ volatile unsigned short timer_tcr1; /* timer 1 capture reg */
+ volatile unsigned short timer_tcr2; /* timer 2 capture reg */
+ volatile unsigned short timer_tcn1; /* timer 1 counter reg */
+ volatile unsigned short timer_tcn2; /* timer 2 counter reg */
+ volatile unsigned short timer_tmr3; /* timer 3 mode reg */
+ volatile unsigned short timer_tmr4; /* timer 4 mode reg */
+ volatile unsigned short timer_trr3; /* timer 3 referance reg */
+ volatile unsigned short timer_trr4; /* timer 4 referance reg */
+ volatile unsigned short timer_tcr3; /* timer 3 capture reg */
+ volatile unsigned short timer_tcr4; /* timer 4 capture reg */
+ volatile unsigned short timer_tcn3; /* timer 3 counter reg */
+ volatile unsigned short timer_tcn4; /* timer 4 counter reg */
+ volatile unsigned short timer_ter1; /* timer 1 event reg */
+ volatile unsigned short timer_ter2; /* timer 2 event reg */
+ volatile unsigned short timer_ter3; /* timer 3 event reg */
+ volatile unsigned short timer_ter4; /* timer 4 event reg */
+ volatile unsigned char RESERVED34[0x8]; /* Reserved area */
+ /* CP */
+ volatile unsigned short cp_cr; /* command register */
+ volatile unsigned char RESERVED35[0x2]; /* Reserved area */
+ volatile unsigned short cp_rccr; /* main configuration reg */
+ volatile unsigned char RESERVED37; /* Reserved area */
+ volatile unsigned char cp_rmds; /* development support status reg */
+ volatile unsigned long cp_rmdr; /* development support control reg */
+ volatile unsigned short cp_rctr1; /* ram break register 1 */
+ volatile unsigned short cp_rctr2; /* ram break register 2 */
+ volatile unsigned short cp_rctr3; /* ram break register 3 */
+ volatile unsigned short cp_rctr4; /* ram break register 4 */
+ volatile unsigned char RESERVED59[0x2]; /* Reserved area */
+ volatile unsigned short cp_rter; /* RISC timers event reg */
+ volatile unsigned char RESERVED38[0x2]; /* Reserved area */
+ volatile unsigned short cp_rtmr; /* RISC timers mask reg */
+ volatile unsigned char RESERVED39[0x14]; /* Reserved area */
+ /* BRG */
+ union {
+ volatile unsigned long l;
+ struct {
+ volatile unsigned short BRGC_RESERV:14;
+ volatile unsigned short rst:1;
+ volatile unsigned short en:1;
+ volatile unsigned short extc:2;
+ volatile unsigned short atb:1;
+ volatile unsigned short cd:12;
+ volatile unsigned short div16:1;
+ } b;
+ } brgc[4]; /* BRG1-BRG4 configuration regs*/
+ /* SCC registers */
+ struct scc_regs {
+ union {
+ struct {
+ /* Low word. */
+ volatile unsigned short GSMR_RESERV2:1;
+ volatile unsigned short edge:2;
+ volatile unsigned short tci:1;
+ volatile unsigned short tsnc:2;
+ volatile unsigned short rinv:1;
+ volatile unsigned short tinv:1;
+ volatile unsigned short tpl:3;
+ volatile unsigned short tpp:2;
+ volatile unsigned short tend:1;
+ volatile unsigned short tdcr:2;
+ volatile unsigned short rdcr:2;
+ volatile unsigned short renc:3;
+ volatile unsigned short tenc:3;
+ volatile unsigned short diag:2;
+ volatile unsigned short enr:1;
+ volatile unsigned short ent:1;
+ volatile unsigned short mode:4;
+ /* High word. */
+ volatile unsigned short GSMR_RESERV1:14;
+ volatile unsigned short pri:1;
+ volatile unsigned short gde:1;
+ volatile unsigned short tcrc:2;
+ volatile unsigned short revd:1;
+ volatile unsigned short trx:1;
+ volatile unsigned short ttx:1;
+ volatile unsigned short cdp:1;
+ volatile unsigned short ctsp:1;
+ volatile unsigned short cds:1;
+ volatile unsigned short ctss:1;
+ volatile unsigned short tfl:1;
+ volatile unsigned short rfw:1;
+ volatile unsigned short txsy:1;
+ volatile unsigned short synl:2;
+ volatile unsigned short rtsm:1;
+ volatile unsigned short rsyn:1;
+ } b;
+ struct {
+ volatile unsigned long low;
+ volatile unsigned long high;
+ } w;
+ } scc_gsmr; /* SCC general mode reg */
+ volatile unsigned short scc_psmr; /* protocol specific mode reg */
+ volatile unsigned char RESERVED42[0x2]; /* Reserved area */
+ volatile unsigned short scc_todr; /* SCC transmit on demand */
+ volatile unsigned short scc_dsr; /* SCC data sync reg */
+ volatile unsigned short scc_scce; /* SCC event reg */
+ volatile unsigned char RESERVED43[0x2];/* Reserved area */
+ volatile unsigned short scc_sccm; /* SCC mask reg */
+ volatile unsigned char RESERVED44[0x1];/* Reserved area */
+ volatile unsigned char scc_sccs; /* SCC status reg */
+ volatile unsigned char RESERVED45[0x8]; /* Reserved area */
+ } scc_regs[4];
+ /* SMC */
+ struct smc_regs {
+ volatile unsigned char RESERVED46[0x2]; /* Reserved area */
+ volatile unsigned short smc_smcmr; /* SMC mode reg */
+ volatile unsigned char RESERVED60[0x2]; /* Reserved area */
+ volatile unsigned char smc_smce; /* SMC event reg */
+ volatile unsigned char RESERVED47[0x3]; /* Reserved area */
+ volatile unsigned char smc_smcm; /* SMC mask reg */
+ volatile unsigned char RESERVED48[0x5]; /* Reserved area */
+ } smc_regs[2];
+ /* SPI */
+ volatile unsigned short spi_spmode; /* SPI mode reg */
+ volatile unsigned char RESERVED51[0x4]; /* Reserved area */
+ volatile unsigned char spi_spie; /* SPI event reg */
+ volatile unsigned char RESERVED52[0x3]; /* Reserved area */
+ volatile unsigned char spi_spim; /* SPI mask reg */
+ volatile unsigned char RESERVED53[0x2]; /* Reserved area */
+ volatile unsigned char spi_spcom; /* SPI command reg */
+ volatile unsigned char RESERVED54[0x4]; /* Reserved area */
+ /* PIP */
+ volatile unsigned short pip_pipc; /* pip configuration reg */
+ volatile unsigned char RESERVED65[0x2]; /* Reserved area */
+ volatile unsigned short pip_ptpr; /* pip timing parameters reg */
+ volatile unsigned long pip_pbdir; /* port b data direction reg */
+ volatile unsigned long pip_pbpar; /* port b pin assignment reg */
+ volatile unsigned long pip_pbodr; /* port b open drain reg */
+ volatile unsigned long pip_pbdat; /* port b data reg */
+ volatile unsigned char RESERVED71[0x18]; /* Reserved area */
+ /* Serial Interface */
+ volatile unsigned long si_simode; /* SI mode register */
+ volatile unsigned char si_sigmr; /* SI global mode register */
+ volatile unsigned char RESERVED55; /* Reserved area */
+ volatile unsigned char si_sistr; /* SI status register */
+ volatile unsigned char si_sicmr; /* SI command register */
+ volatile unsigned char RESERVED56[0x4]; /* Reserved area */
+ volatile unsigned long si_sicr; /* SI clock routing */
+ volatile unsigned long si_sirp; /* SI ram pointers */
+ volatile unsigned char RESERVED57[0xc]; /* Reserved area */
+ volatile unsigned short si_siram[0x80]; /* SI routing ram */
+} QUICC;
+
+#endif
+
+/*
+ * Local variables:
+ * c-indent-level: 4
+ * c-basic-offset: 4
+ * tab-width: 4
+ * End:
+ */
--- /dev/null
+/***********************************
+ * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of the QUICC registers
+ ***************************************
+ */
+
+#ifndef __REGISTERS_H
+#define __REGISTERS_H
+
+#define CLEAR_BIT(x, bit) x =bit
+
+/*****************************************************************
+ Command Register
+*****************************************************************/
+
+/* bit fields within command register */
+#define SOFTWARE_RESET 0x8000
+#define CMD_OPCODE 0x0f00
+#define CMD_CHANNEL 0x00f0
+#define CMD_FLAG 0x0001
+
+/* general command opcodes */
+#define INIT_RXTX_PARAMS 0x0000
+#define INIT_RX_PARAMS 0x0100
+#define INIT_TX_PARAMS 0x0200
+#define ENTER_HUNT_MODE 0x0300
+#define STOP_TX 0x0400
+#define GR_STOP_TX 0x0500
+#define RESTART_TX 0x0600
+#define CLOSE_RX_BD 0x0700
+#define SET_ENET_GROUP 0x0800
+#define RESET_ENET_GROUP 0x0900
+
+/* quicc32 CP commands */
+#define STOP_TX_32 0x0e00 /*add chan# bits 2-6 */
+#define ENTER_HUNT_MODE_32 0x1e00
+
+/* quicc32 mask/event SCC register */
+#define GOV 0x01
+#define GUN 0x02
+#define GINT 0x04
+#define IQOV 0x08
+
+
+/* Timer commands */
+#define SET_TIMER 0x0800
+
+/* Multi channel Interrupt structure */
+#define INTR_VALID 0x8000 /* Valid interrupt entry */
+#define INTR_WRAP 0x4000 /* Wrap bit in the interrupt entry table */
+#define INTR_CH_NU 0x07c0 /* Channel Num in interrupt table */
+#define INTR_MASK_BITS 0x383f
+
+/*
+ * General SCC mode register (GSMR)
+ */
+
+#define MODE_HDLC 0x0
+#define MODE_APPLE_TALK 0x2
+#define MODE_SS7 0x3
+#define MODE_UART 0x4
+#define MODE_PROFIBUS 0x5
+#define MODE_ASYNC_HDLC 0x6
+#define MODE_V14 0x7
+#define MODE_BISYNC 0x8
+#define MODE_DDCMP 0x9
+#define MODE_MULTI_CHANNEL 0xa
+#define MODE_ETHERNET 0xc
+
+#define DIAG_NORMAL 0x0
+#define DIAG_LOCAL_LPB 0x1
+#define DIAG_AUTO_ECHO 0x2
+#define DIAG_LBP_ECHO 0x3
+
+/* For RENC and TENC fields in GSMR */
+#define ENC_NRZ 0x0
+#define ENC_NRZI 0x1
+#define ENC_FM0 0x2
+#define ENC_MANCH 0x4
+#define ENC_DIFF_MANC 0x6
+
+/* For TDCR and RDCR fields in GSMR */
+#define CLOCK_RATE_1 0x0
+#define CLOCK_RATE_8 0x1
+#define CLOCK_RATE_16 0x2
+#define CLOCK_RATE_32 0x3
+
+#define TPP_00 0x0
+#define TPP_10 0x1
+#define TPP_01 0x2
+#define TPP_11 0x3
+
+#define TPL_NO 0x0
+#define TPL_8 0x1
+#define TPL_16 0x2
+#define TPL_32 0x3
+#define TPL_48 0x4
+#define TPL_64 0x5
+#define TPL_128 0x6
+
+#define TSNC_INFINITE 0x0
+#define TSNC_14_65 0x1
+#define TSNC_4_15 0x2
+#define TSNC_3_1 0x3
+
+#define EDGE_BOTH 0x0
+#define EDGE_POS 0x1
+#define EDGE_NEG 0x2
+#define EDGE_NO 0x3
+
+#define SYNL_NO 0x0
+#define SYNL_4 0x1
+#define SYNL_8 0x2
+#define SYNL_16 0x3
+
+#define TCRC_CCITT16 0x0
+#define TCRC_CRC16 0x1
+#define TCRC_CCITT32 0x2
+
+
+/*****************************************************************
+ TODR (Transmit on demand) Register
+*****************************************************************/
+#define TODR_TOD 0x8000 /* Transmit on demand */
+
+
+/*****************************************************************
+ CICR register settings
+*****************************************************************/
+
+/* note that relative irq priorities of the SCCs can be reordered
+ * if desired - see p. 7-377 of the MC68360UM */
+#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
+#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
+#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
+#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
+
+#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
+#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
+#define CICR_VBA_MASK ((uint)0x000000e0) /* Vector Base Address */
+#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
+
+
+/*****************************************************************
+ Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379)
+*****************************************************************/
+
+#define INTR_PIO_PC0 0x80000000 /* parallel I/O C bit 0 */
+#define INTR_SCC1 0x40000000 /* SCC port 1 */
+#define INTR_SCC2 0x20000000 /* SCC port 2 */
+#define INTR_SCC3 0x10000000 /* SCC port 3 */
+#define INTR_SCC4 0x08000000 /* SCC port 4 */
+#define INTR_PIO_PC1 0x04000000 /* parallel i/o C bit 1 */
+#define INTR_TIMER1 0x02000000 /* timer 1 */
+#define INTR_PIO_PC2 0x01000000 /* parallel i/o C bit 2 */
+#define INTR_PIO_PC3 0x00800000 /* parallel i/o C bit 3 */
+#define INTR_SDMA_BERR 0x00400000 /* SDMA channel bus error */
+#define INTR_DMA1 0x00200000 /* idma 1 */
+#define INTR_DMA2 0x00100000 /* idma 2 */
+#define INTR_TIMER2 0x00040000 /* timer 2 */
+#define INTR_CP_TIMER 0x00020000 /* CP timer */
+#define INTR_PIP_STATUS 0x00010000 /* PIP status */
+#define INTR_PIO_PC4 0x00008000 /* parallel i/o C bit 4 */
+#define INTR_PIO_PC5 0x00004000 /* parallel i/o C bit 5 */
+#define INTR_TIMER3 0x00001000 /* timer 3 */
+#define INTR_PIO_PC6 0x00000800 /* parallel i/o C bit 6 */
+#define INTR_PIO_PC7 0x00000400 /* parallel i/o C bit 7 */
+#define INTR_PIO_PC8 0x00000200 /* parallel i/o C bit 8 */
+#define INTR_TIMER4 0x00000080 /* timer 4 */
+#define INTR_PIO_PC9 0x00000040 /* parallel i/o C bit 9 */
+#define INTR_SCP 0x00000020 /* SCP */
+#define INTR_SMC1 0x00000010 /* SMC 1 */
+#define INTR_SMC2 0x00000008 /* SMC 2 */
+#define INTR_PIO_PC10 0x00000004 /* parallel i/o C bit 10 */
+#define INTR_PIO_PC11 0x00000002 /* parallel i/o C bit 11 */
+#define INTR_ERR 0x00000001 /* error */
+
+
+/*****************************************************************
+ CPM Interrupt vector encodings (MC68360UM p. 7-376)
+*****************************************************************/
+
+#define CPMVEC_NR 32
+#define CPMVEC_PIO_PC0 0x1f
+#define CPMVEC_SCC1 0x1e
+#define CPMVEC_SCC2 0x1d
+#define CPMVEC_SCC3 0x1c
+#define CPMVEC_SCC4 0x1b
+#define CPMVEC_PIO_PC1 0x1a
+#define CPMVEC_TIMER1 0x19
+#define CPMVEC_PIO_PC2 0x18
+#define CPMVEC_PIO_PC3 0x17
+#define CPMVEC_SDMA_CB_ERR 0x16
+#define CPMVEC_IDMA1 0x15
+#define CPMVEC_IDMA2 0x14
+#define CPMVEC_RESERVED3 0x13
+#define CPMVEC_TIMER2 0x12
+#define CPMVEC_RISCTIMER 0x11
+#define CPMVEC_RESERVED2 0x10
+#define CPMVEC_PIO_PC4 0x0f
+#define CPMVEC_PIO_PC5 0x0e
+#define CPMVEC_TIMER3 0x0c
+#define CPMVEC_PIO_PC6 0x0b
+#define CPMVEC_PIO_PC7 0x0a
+#define CPMVEC_PIO_PC8 0x09
+#define CPMVEC_RESERVED1 0x08
+#define CPMVEC_TIMER4 0x07
+#define CPMVEC_PIO_PC9 0x06
+#define CPMVEC_SPI 0x05
+#define CPMVEC_SMC1 0x04
+#define CPMVEC_SMC2 0x03
+#define CPMVEC_PIO_PC10 0x02
+#define CPMVEC_PIO_PC11 0x01
+#define CPMVEC_ERROR 0x00
+
+/* #define CPMVEC_PIO_PC0 ((ushort)0x1f) */
+/* #define CPMVEC_SCC1 ((ushort)0x1e) */
+/* #define CPMVEC_SCC2 ((ushort)0x1d) */
+/* #define CPMVEC_SCC3 ((ushort)0x1c) */
+/* #define CPMVEC_SCC4 ((ushort)0x1b) */
+/* #define CPMVEC_PIO_PC1 ((ushort)0x1a) */
+/* #define CPMVEC_TIMER1 ((ushort)0x19) */
+/* #define CPMVEC_PIO_PC2 ((ushort)0x18) */
+/* #define CPMVEC_PIO_PC3 ((ushort)0x17) */
+/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */
+/* #define CPMVEC_IDMA1 ((ushort)0x15) */
+/* #define CPMVEC_IDMA2 ((ushort)0x14) */
+/* #define CPMVEC_RESERVED3 ((ushort)0x13) */
+/* #define CPMVEC_TIMER2 ((ushort)0x12) */
+/* #define CPMVEC_RISCTIMER ((ushort)0x11) */
+/* #define CPMVEC_RESERVED2 ((ushort)0x10) */
+/* #define CPMVEC_PIO_PC4 ((ushort)0x0f) */
+/* #define CPMVEC_PIO_PC5 ((ushort)0x0e) */
+/* #define CPMVEC_TIMER3 ((ushort)0x0c) */
+/* #define CPMVEC_PIO_PC6 ((ushort)0x0b) */
+/* #define CPMVEC_PIO_PC7 ((ushort)0x0a) */
+/* #define CPMVEC_PIO_PC8 ((ushort)0x09) */
+/* #define CPMVEC_RESERVED1 ((ushort)0x08) */
+/* #define CPMVEC_TIMER4 ((ushort)0x07) */
+/* #define CPMVEC_PIO_PC9 ((ushort)0x06) */
+/* #define CPMVEC_SPI ((ushort)0x05) */
+/* #define CPMVEC_SMC1 ((ushort)0x04) */
+/* #define CPMVEC_SMC2 ((ushort)0x03) */
+/* #define CPMVEC_PIO_PC10 ((ushort)0x02) */
+/* #define CPMVEC_PIO_PC11 ((ushort)0x01) */
+/* #define CPMVEC_ERROR ((ushort)0x00) */
+
+
+/*****************************************************************
+ * PIO control registers
+ *****************************************************************/
+
+/* Port A - See 360UM p. 7-358
+ *
+ * Note that most of these pins have alternate functions
+ */
+
+
+/* The macros are nice, but there are all sorts of references to 1-indexed
+ * facilities on the 68360... */
+/* #define PA_RXD(n) ((ushort)(0x01<<(2*n))) */
+/* #define PA_TXD(n) ((ushort)(0x02<<(2*n))) */
+
+#define PA_RXD1 ((ushort)0x0001)
+#define PA_TXD1 ((ushort)0x0002)
+#define PA_RXD2 ((ushort)0x0004)
+#define PA_TXD2 ((ushort)0x0008)
+#define PA_RXD3 ((ushort)0x0010)
+#define PA_TXD3 ((ushort)0x0020)
+#define PA_RXD4 ((ushort)0x0040)
+#define PA_TXD4 ((ushort)0x0080)
+
+#define PA_CLK1 ((ushort)0x0100)
+#define PA_CLK2 ((ushort)0x0200)
+#define PA_CLK3 ((ushort)0x0400)
+#define PA_CLK4 ((ushort)0x0800)
+#define PA_CLK5 ((ushort)0x1000)
+#define PA_CLK6 ((ushort)0x2000)
+#define PA_CLK7 ((ushort)0x4000)
+#define PA_CLK8 ((ushort)0x8000)
+
+
+/* Port B - See 360UM p. 7-362
+ */
+
+
+/* Port C - See 360UM p. 7-365
+ */
+
+#define PC_RTS1 ((ushort)0x0001)
+#define PC_RTS2 ((ushort)0x0002)
+#define PC__RTS3 ((ushort)0x0004) /* !RTS3 */
+#define PC__RTS4 ((ushort)0x0008) /* !RTS4 */
+
+#define PC_CTS1 ((ushort)0x0010)
+#define PC_CD1 ((ushort)0x0020)
+#define PC_CTS2 ((ushort)0x0040)
+#define PC_CD2 ((ushort)0x0080)
+#define PC_CTS3 ((ushort)0x0100)
+#define PC_CD3 ((ushort)0x0200)
+#define PC_CTS4 ((ushort)0x0400)
+#define PC_CD4 ((ushort)0x0800)
+
+
+
+/*****************************************************************
+ chip select option register
+*****************************************************************/
+#define DTACK 0xe000
+#define ADR_MASK 0x1ffc
+#define RDWR_MASK 0x0002
+#define FC_MASK 0x0001
+
+/*****************************************************************
+ tbase and rbase registers
+*****************************************************************/
+#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \
+ (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase))
+#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \
+ (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase))
+#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
+ (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr))
+#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
+ (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr))
+#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \
+ ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
+#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \
+ ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
+#define INCREASE_TBD(bd,quicc,pram) { \
+ if((bd)->status & T_W) \
+ (bd) = TBD_ADDR(quicc,pram); \
+ else \
+ (bd)++; \
+}
+#define DECREASE_TBD(bd,quicc,pram) { \
+ if ((bd) == TBD_ADDR(quicc, pram)) \
+ while (!((bd)->status & T_W)) \
+ (bd)++; \
+ else \
+ (bd)--; \
+}
+#define INCREASE_RBD(bd,quicc,pram) { \
+ if((bd)->status & R_W) \
+ (bd) = RBD_ADDR(quicc,pram); \
+ else \
+ (bd)++; \
+}
+#define DECREASE_RBD(bd,quicc,pram) { \
+ if ((bd) == RBD_ADDR(quicc, pram)) \
+ while (!((bd)->status & T_W)) \
+ (bd)++; \
+ else \
+ (bd)--; \
+}
+
+/*****************************************************************
+ Macros for Multi channel
+*****************************************************************/
+#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page])
+#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase)
+#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \
+ (&(quicc->ch_or_u.ch_pram_tbl[channel])))
+#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+ (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase)))
+#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+ (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase)))
+#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+ (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr)))
+#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+ (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr)))
+#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
+ CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \
+ ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
+#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
+ CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \
+ ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
+
+#define INCREASE_TBD_32(bd,quicc,page,channel) { \
+ if((bd)->status & T_W) \
+ (bd) = TBD_32_ADDR(quicc,page,channel); \
+ else \
+ (bd)++; \
+}
+#define DECREASE_TBD_32(bd,quicc,page,channel) { \
+ if ((bd) == TBD_32_ADDR(quicc, page,channel)) \
+ while (!((bd)->status & T_W)) \
+ (bd)++; \
+ else \
+ (bd)--; \
+}
+#define INCREASE_RBD_32(bd,quicc,page,channel) { \
+ if((bd)->status & R_W) \
+ (bd) = RBD_32_ADDR(quicc,page,channel); \
+ else \
+ (bd)++; \
+}
+#define DECREASE_RBD_32(bd,quicc,page,channel) { \
+ if ((bd) == RBD_32_ADDR(quicc, page,channel)) \
+ while (!((bd)->status & T_W)) \
+ (bd)++; \
+ else \
+ (bd)--; \
+}
+
+#endif
--- /dev/null
+#ifndef _M68KNOMMU_MACHDEP_H
+#define _M68KNOMMU_MACHDEP_H
+
+#include <linux/interrupt.h>
+
+/* Hardware clock functions */
+extern void hw_timer_init(void);
+extern unsigned long hw_timer_offset(void);
+
+extern irqreturn_t arch_timer_interrupt(int irq, void *dummy);
+
+/* Machine dependent time handling */
+extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour,
+ int *min, int *sec);
+extern int (*mach_set_clock_mmss)(unsigned long);
+
+/* machine dependent power off functions */
+extern void (*mach_reset)( void );
+extern void (*mach_halt)( void );
+extern void (*mach_power_off)( void );
+
+extern void config_BSP(char *command, int len);
+
+extern void do_IRQ(int irq, struct pt_regs *fp);
+
+#endif /* _M68KNOMMU_MACHDEP_H */
--- /dev/null
+#include <asm-m68k/math-emu.h>
--- /dev/null
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _M68KNOMMU_MC146818RTC_H
+#define _M68KNOMMU_MC146818RTC_H
+
+/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
+
+#endif /* _M68KNOMMU_MC146818RTC_H */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfcache.h -- ColdFire CPU cache support code
+ *
+ * (C) Copyright 2004, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/****************************************************************************/
+#ifndef __M68KNOMMU_MCFCACHE_H
+#define __M68KNOMMU_MCFCACHE_H
+/****************************************************************************/
+
+
+/*
+ * The different ColdFire families have different cache arrangments.
+ * Everything from a small instruction only cache, to configurable
+ * data and/or instruction cache, to unified instruction/data, to
+ * harvard style separate instruction and data caches.
+ */
+
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
+/*
+ * Simple version 2 core cache. These have instruction cache only,
+ * we just need to invalidate it and enable it.
+ */
+.macro CACHE_ENABLE
+ movel #0x01000000,%d0 /* invalidate cache cmd */
+ movec %d0,%CACR /* do invalidate cache */
+ movel #0x80000100,%d0 /* setup cache mask */
+ movec %d0,%CACR /* enable cache */
+.endm
+#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
+
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
+/*
+ * New version 2 cores have a configurable split cache arrangement.
+ * For now I am just enabling instruction cache - but ultimately I
+ * think a split instruction/data cache would be better.
+ */
+.macro CACHE_ENABLE
+ movel #0x01400000,%d0
+ movec %d0,%CACR /* invalidate cache */
+ nop
+ movel #0x0000c000,%d0 /* set SDRAM cached only */
+ movec %d0,%ACR0
+ movel #0x00000000,%d0 /* no other regions cached */
+ movec %d0,%ACR1
+ movel #0x80400100,%d0 /* configure cache */
+ movec %d0,%CACR /* enable cache */
+ nop
+.endm
+#endif /* CONFIG_M523x || CONFIG_M527x */
+
+#if defined(CONFIG_M528x)
+.macro CACHE_ENABLE
+ nop
+ movel #0x01000000, %d0
+ movec %d0, %CACR /* Invalidate cache */
+ nop
+ movel #0x0000c020, %d0 /* Set SDRAM cached only */
+ movec %d0, %ACR0
+ movel #0x00000000, %d0 /* No other regions cached */
+ movec %d0, %ACR1
+ movel #0x80000200, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Enable cache */
+ nop
+.endm
+#endif /* CONFIG_M528x */
+
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307)
+/*
+ * The version 3 core cache. Oddly enough the version 2 core 5249
+ * has the same SDRAM and cache setup as the version 3 cores.
+ * This is a single unified instruction/data cache.
+ */
+.macro CACHE_ENABLE
+ movel #0x01000000,%d0 /* invalidate whole cache */
+ movec %d0,%CACR
+ nop
+#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3)
+ movel #0x0000c000,%d0 /* set SDRAM cached (write-thru) */
+#else
+ movel #0x0000c020,%d0 /* set SDRAM cached (copyback) */
+#endif
+ movec %d0,%ACR0
+ movel #0x00000000,%d0 /* no other regions cached */
+ movec %d0,%ACR1
+ movel #0xa0000200,%d0 /* enable cache */
+ movec %d0,%CACR
+ nop
+.endm
+#endif /* CONFIG_M5249 || CONFIG_M5307 */
+
+#if defined(CONFIG_M532x)
+.macro CACHE_ENABLE
+ movel #0x01000000,%d0 /* invalidate cache cmd */
+ movec %d0,%CACR /* do invalidate cache */
+ nop
+ movel #0x4001C000,%d0 /* set SDRAM cached (write-thru) */
+ movec %d0,%ACR0
+ movel #0x00000000,%d0 /* no other regions cached */
+ movec %d0,%ACR1
+ movel #0x80000200,%d0 /* setup cache mask */
+ movec %d0,%CACR /* enable cache */
+ nop
+.endm
+#endif /* CONFIG_M532x */
+
+#if defined(CONFIG_M5407)
+/*
+ * Version 4 cores have a true harvard style separate instruction
+ * and data cache. Invalidate and enable cache, also enable write
+ * buffers and branch accelerator.
+ */
+.macro CACHE_ENABLE
+ movel #0x01040100,%d0 /* invalidate whole cache */
+ movec %d0,%CACR
+ nop
+ movel #0x000fc000,%d0 /* set SDRAM cached only */
+ movec %d0, %ACR0
+ movel #0x00000000,%d0 /* no other regions cached */
+ movec %d0, %ACR1
+ movel #0x000fc000,%d0 /* set SDRAM cached only */
+ movec %d0, %ACR2
+ movel #0x00000000,%d0 /* no other regions cached */
+ movec %d0, %ACR3
+ movel #0xb6088400,%d0 /* enable caches */
+ movec %d0,%CACR
+ nop
+.endm
+#endif /* CONFIG_M5407 */
+
+#if defined(CONFIG_M520x)
+.macro CACHE_ENABLE
+ move.l #0x01000000,%d0 /* invalidate whole cache */
+ movec %d0,%CACR
+ nop
+ move.l #0x0000c000,%d0 /* set SDRAM cached (write-thru) */
+ movec %d0,%ACR0
+ move.l #0x00000000,%d0 /* no other regions cached */
+ movec %d0,%ACR1
+ move.l #0x80400000,%d0 /* enable 8K instruction cache */
+ movec %d0,%CACR
+ nop
+.endm
+#endif /* CONFIG_M520x */
+
+/****************************************************************************/
+#endif /* __M68KNOMMU_MCFCACHE_H */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfdma.h -- Coldfire internal DMA support defines.
+ *
+ * (C) Copyright 1999, Rob Scott (rscott@mtrob.ml.org)
+ */
+
+/****************************************************************************/
+#ifndef mcfdma_h
+#define mcfdma_h
+/****************************************************************************/
+
+
+/*
+ * Get address specific defines for this Coldfire member.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#define MCFDMA_BASE0 0x200 /* Base address of DMA 0 */
+#define MCFDMA_BASE1 0x240 /* Base address of DMA 1 */
+#elif defined(CONFIG_M5272)
+#define MCFDMA_BASE0 0x0e0 /* Base address of DMA 0 */
+#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+/* These are relative to the IPSBAR, not MBAR */
+#define MCFDMA_BASE0 0x100 /* Base address of DMA 0 */
+#define MCFDMA_BASE1 0x140 /* Base address of DMA 1 */
+#define MCFDMA_BASE2 0x180 /* Base address of DMA 2 */
+#define MCFDMA_BASE3 0x1C0 /* Base address of DMA 3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#define MCFDMA_BASE0 0x300 /* Base address of DMA 0 */
+#define MCFDMA_BASE1 0x340 /* Base address of DMA 1 */
+#define MCFDMA_BASE2 0x380 /* Base address of DMA 2 */
+#define MCFDMA_BASE3 0x3C0 /* Base address of DMA 3 */
+#endif
+
+
+#if !defined(CONFIG_M5272)
+
+/*
+ * Define the DMA register set addresses.
+ * Note: these are longword registers, use unsigned long as data type
+ */
+#define MCFDMA_SAR 0x00 /* DMA source address (r/w) */
+#define MCFDMA_DAR 0x01 /* DMA destination adr (r/w) */
+/* these are word registers, use unsigned short data type */
+#define MCFDMA_DCR 0x04 /* DMA control reg (r/w) */
+#define MCFDMA_BCR 0x06 /* DMA byte count reg (r/w) */
+/* these are byte registers, use unsiged char data type */
+#define MCFDMA_DSR 0x10 /* DMA status reg (r/w) */
+#define MCFDMA_DIVR 0x14 /* DMA interrupt vec (r/w) */
+
+/*
+ * Bit definitions for the DMA Control Register (DCR).
+ */
+#define MCFDMA_DCR_INT 0x8000 /* Enable completion irq */
+#define MCFDMA_DCR_EEXT 0x4000 /* Enable external DMA req */
+#define MCFDMA_DCR_CS 0x2000 /* Enable cycle steal */
+#define MCFDMA_DCR_AA 0x1000 /* Enable auto alignment */
+#define MCFDMA_DCR_BWC_MASK 0x0E00 /* Bandwidth ctl mask */
+#define MCFDMA_DCR_BWC_512 0x0200 /* Bandwidth: 512 Bytes */
+#define MCFDMA_DCR_BWC_1024 0x0400 /* Bandwidth: 1024 Bytes */
+#define MCFDMA_DCR_BWC_2048 0x0600 /* Bandwidth: 2048 Bytes */
+#define MCFDMA_DCR_BWC_4096 0x0800 /* Bandwidth: 4096 Bytes */
+#define MCFDMA_DCR_BWC_8192 0x0a00 /* Bandwidth: 8192 Bytes */
+#define MCFDMA_DCR_BWC_16384 0x0c00 /* Bandwidth: 16384 Bytes */
+#define MCFDMA_DCR_BWC_32768 0x0e00 /* Bandwidth: 32768 Bytes */
+#define MCFDMA_DCR_SAA 0x0100 /* Single Address Access */
+#define MCFDMA_DCR_S_RW 0x0080 /* SAA read/write value */
+#define MCFDMA_DCR_SINC 0x0040 /* Source addr inc enable */
+#define MCFDMA_DCR_SSIZE_MASK 0x0030 /* Src xfer size */
+#define MCFDMA_DCR_SSIZE_LONG 0x0000 /* Src xfer size, 00 = longw */
+#define MCFDMA_DCR_SSIZE_BYTE 0x0010 /* Src xfer size, 01 = byte */
+#define MCFDMA_DCR_SSIZE_WORD 0x0020 /* Src xfer size, 10 = word */
+#define MCFDMA_DCR_SSIZE_LINE 0x0030 /* Src xfer size, 11 = line */
+#define MCFDMA_DCR_DINC 0x0008 /* Dest addr inc enable */
+#define MCFDMA_DCR_DSIZE_MASK 0x0006 /* Dest xfer size */
+#define MCFDMA_DCR_DSIZE_LONG 0x0000 /* Dest xfer size, 00 = long */
+#define MCFDMA_DCR_DSIZE_BYTE 0x0002 /* Dest xfer size, 01 = byte */
+#define MCFDMA_DCR_DSIZE_WORD 0x0004 /* Dest xfer size, 10 = word */
+#define MCFDMA_DCR_DSIZE_LINE 0x0006 /* Dest xfer size, 11 = line */
+#define MCFDMA_DCR_START 0x0001 /* Start transfer */
+
+/*
+ * Bit definitions for the DMA Status Register (DSR).
+ */
+#define MCFDMA_DSR_CE 0x40 /* Config error */
+#define MCFDMA_DSR_BES 0x20 /* Bus Error on source */
+#define MCFDMA_DSR_BED 0x10 /* Bus Error on dest */
+#define MCFDMA_DSR_REQ 0x04 /* Requests remaining */
+#define MCFDMA_DSR_BSY 0x02 /* Busy */
+#define MCFDMA_DSR_DONE 0x01 /* DMA transfer complete */
+
+#else /* This is an MCF5272 */
+
+#define MCFDMA_DMR 0x00 /* Mode Register (r/w) */
+#define MCFDMA_DIR 0x03 /* Interrupt trigger register (r/w) */
+#define MCFDMA_DSAR 0x03 /* Source Address register (r/w) */
+#define MCFDMA_DDAR 0x04 /* Destination Address register (r/w) */
+#define MCFDMA_DBCR 0x02 /* Byte Count Register (r/w) */
+
+/* Bit definitions for the DMA Mode Register (DMR) */
+#define MCFDMA_DMR_RESET 0x80000000L /* Reset bit */
+#define MCFDMA_DMR_EN 0x40000000L /* DMA enable */
+#define MCFDMA_DMR_RQM 0x000C0000L /* Request Mode Mask */
+#define MCFDMA_DMR_RQM_DUAL 0x000C0000L /* Dual address mode, the only valid mode */
+#define MCFDMA_DMR_DSTM 0x00002000L /* Destination addressing mask */
+#define MCFDMA_DMR_DSTM_SA 0x00000000L /* Destination uses static addressing */
+#define MCFDMA_DMR_DSTM_IA 0x00002000L /* Destination uses incremental addressing */
+#define MCFDMA_DMR_DSTT_UD 0x00000400L /* Destination is user data */
+#define MCFDMA_DMR_DSTT_UC 0x00000800L /* Destination is user code */
+#define MCFDMA_DMR_DSTT_SD 0x00001400L /* Destination is supervisor data */
+#define MCFDMA_DMR_DSTT_SC 0x00001800L /* Destination is supervisor code */
+#define MCFDMA_DMR_DSTS_OFF 0x8 /* offset to the destination size bits */
+#define MCFDMA_DMR_DSTS_LONG 0x00000000L /* Long destination size */
+#define MCFDMA_DMR_DSTS_BYTE 0x00000100L /* Byte destination size */
+#define MCFDMA_DMR_DSTS_WORD 0x00000200L /* Word destination size */
+#define MCFDMA_DMR_DSTS_LINE 0x00000300L /* Line destination size */
+#define MCFDMA_DMR_SRCM 0x00000020L /* Source addressing mask */
+#define MCFDMA_DMR_SRCM_SA 0x00000000L /* Source uses static addressing */
+#define MCFDMA_DMR_SRCM_IA 0x00000020L /* Source uses incremental addressing */
+#define MCFDMA_DMR_SRCT_UD 0x00000004L /* Source is user data */
+#define MCFDMA_DMR_SRCT_UC 0x00000008L /* Source is user code */
+#define MCFDMA_DMR_SRCT_SD 0x00000014L /* Source is supervisor data */
+#define MCFDMA_DMR_SRCT_SC 0x00000018L /* Source is supervisor code */
+#define MCFDMA_DMR_SRCS_OFF 0x0 /* Offset to the source size bits */
+#define MCFDMA_DMR_SRCS_LONG 0x00000000L /* Long source size */
+#define MCFDMA_DMR_SRCS_BYTE 0x00000001L /* Byte source size */
+#define MCFDMA_DMR_SRCS_WORD 0x00000002L /* Word source size */
+#define MCFDMA_DMR_SRCS_LINE 0x00000003L /* Line source size */
+
+/* Bit definitions for the DMA interrupt register (DIR) */
+#define MCFDMA_DIR_INVEN 0x1000 /* Invalid Combination interrupt enable */
+#define MCFDMA_DIR_ASCEN 0x0800 /* Address Sequence Complete (Completion) interrupt enable */
+#define MCFDMA_DIR_TEEN 0x0200 /* Transfer Error interrupt enable */
+#define MCFDMA_DIR_TCEN 0x0100 /* Transfer Complete (a bus transfer, that is) interrupt enable */
+#define MCFDMA_DIR_INV 0x0010 /* Invalid Combination */
+#define MCFDMA_DIR_ASC 0x0008 /* Address Sequence Complete (DMA Completion) */
+#define MCFDMA_DIR_TE 0x0002 /* Transfer Error */
+#define MCFDMA_DIR_TC 0x0001 /* Transfer Complete */
+
+#endif /* !defined(CONFIG_M5272) */
+
+/****************************************************************************/
+#endif /* mcfdma_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfmbus.h -- Coldfire MBUS support defines.
+ *
+ * (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de)
+ */
+
+/****************************************************************************/
+
+
+#ifndef mcfmbus_h
+#define mcfmbus_h
+
+
+#define MCFMBUS_BASE 0x280
+#define MCFMBUS_IRQ_VECTOR 0x19
+#define MCFMBUS_IRQ 0x1
+#define MCFMBUS_CLK 0x3f
+#define MCFMBUS_IRQ_LEVEL 0x07 /*IRQ Level 1*/
+#define MCFMBUS_ADDRESS 0x01
+
+
+/*
+* Define the 5307 MBUS register set addresses
+*/
+
+#define MCFMBUS_MADR 0x00
+#define MCFMBUS_MFDR 0x04
+#define MCFMBUS_MBCR 0x08
+#define MCFMBUS_MBSR 0x0C
+#define MCFMBUS_MBDR 0x10
+
+
+#define MCFMBUS_MADR_ADDR(a) (((a)&0x7F)<<0x01) /*Slave Address*/
+
+#define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/
+
+/*
+* Define bit flags in Control Register
+*/
+
+#define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */
+#define MCFMBUS_MBCR_MIEN (0x40) /* M-Bus Interrupt Enable */
+#define MCFMBUS_MBCR_MSTA (0x20) /* Master/Slave Mode Select Bit */
+#define MCFMBUS_MBCR_MTX (0x10) /* Transmit/Rcv Mode Select Bit */
+#define MCFMBUS_MBCR_TXAK (0x08) /* Transmit Acknowledge Enable */
+#define MCFMBUS_MBCR_RSTA (0x04) /* Repeat Start */
+
+/*
+* Define bit flags in Status Register
+*/
+
+#define MCFMBUS_MBSR_MCF (0x80) /* Data Transfer Complete */
+#define MCFMBUS_MBSR_MAAS (0x40) /* Addressed as a Slave */
+#define MCFMBUS_MBSR_MBB (0x20) /* Bus Busy */
+#define MCFMBUS_MBSR_MAL (0x10) /* Arbitration Lost */
+#define MCFMBUS_MBSR_SRW (0x04) /* Slave Transmit */
+#define MCFMBUS_MBSR_MIF (0x02) /* M-Bus Interrupt */
+#define MCFMBUS_MBSR_RXAK (0x01) /* No Acknowledge Received */
+
+/*
+* Define bit flags in DATA I/O Register
+*/
+
+#define MCFMBUS_MBDR_READ (0x01) /* 1=read 0=write MBUS */
+
+#define MBUSIOCSCLOCK 1
+#define MBUSIOCGCLOCK 2
+#define MBUSIOCSADDR 3
+#define MBUSIOCGADDR 4
+#define MBUSIOCSSLADDR 5
+#define MBUSIOCGSLADDR 6
+#define MBUSIOCSSUBADDR 7
+#define MBUSIOCGSUBADDR 8
+
+#endif
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfne.h -- NE2000 in ColdFire eval boards.
+ *
+ * (C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo (www.lineo.com)
+ * (C) Copyright 2001, SnapGear (www.snapgear.com)
+ *
+ * 19990409 David W. Miller Converted from m5206ne.h for 5307 eval board
+ *
+ * Hacked support for m5206e Cadre III evaluation board
+ * Fred Stevens (fred.stevens@pemstar.com) 13 April 1999
+ */
+
+/****************************************************************************/
+#ifndef mcfne_h
+#define mcfne_h
+/****************************************************************************/
+
+
+/*
+ * Support for NE2000 clones devices in ColdFire based boards.
+ * Not all boards address these parts the same way, some use a
+ * direct addressing method, others use a side-band address space
+ * to access odd address registers, some require byte swapping
+ * others do not.
+ */
+#define BSWAP(w) (((w) << 8) | ((w) >> 8))
+#define RSWAP(w) (w)
+
+
+/*
+ * Define the basic hardware resources of NE2000 boards.
+ */
+
+#if defined(CONFIG_ARN5206)
+#define NE2000_ADDR 0x40000300
+#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_IRQ_VECTOR 0xf0
+#define NE2000_IRQ_PRIORITY 2
+#define NE2000_IRQ_LEVEL 4
+#define NE2000_BYTE volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5206eC3)
+#define NE2000_ADDR 0x40000300
+#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_IRQ_VECTOR 0x1c
+#define NE2000_IRQ_PRIORITY 2
+#define NE2000_IRQ_LEVEL 4
+#define NE2000_BYTE volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
+#define NE2000_ADDR 0x30000300
+#define NE2000_IRQ_VECTOR 25
+#define NE2000_IRQ_PRIORITY 1
+#define NE2000_IRQ_LEVEL 3
+#define NE2000_BYTE volatile unsigned char
+#endif
+
+#if defined(CONFIG_M5307C3)
+#define NE2000_ADDR 0x40000300
+#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_IRQ_VECTOR 0x1b
+#define NE2000_BYTE volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+#define NE2000_ADDR 0x30600300
+#define NE2000_ODDOFFSET 0x00008000
+#define NE2000_IRQ_VECTOR 67
+#undef BSWAP
+#define BSWAP(w) (w)
+#define NE2000_BYTE volatile unsigned short
+#undef RSWAP
+#define RSWAP(w) (((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_NETtel)
+#define NE2000_ADDR0 0x30600300
+#define NE2000_ADDR1 0x30800300
+#define NE2000_ODDOFFSET 0x00008000
+#define NE2000_IRQ_VECTOR0 27
+#define NE2000_IRQ_VECTOR1 29
+#undef BSWAP
+#define BSWAP(w) (w)
+#define NE2000_BYTE volatile unsigned short
+#undef RSWAP
+#define RSWAP(w) (((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
+#define NE2000_ADDR 0x30600300
+#define NE2000_ODDOFFSET 0x00008000
+#define NE2000_IRQ_VECTOR 27
+#undef BSWAP
+#define BSWAP(w) (w)
+#define NE2000_BYTE volatile unsigned short
+#undef RSWAP
+#define RSWAP(w) (((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_ARN5307)
+#define NE2000_ADDR 0xfe600300
+#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_IRQ_VECTOR 0x1b
+#define NE2000_IRQ_PRIORITY 2
+#define NE2000_IRQ_LEVEL 3
+#define NE2000_BYTE volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5407C3)
+#define NE2000_ADDR 0x40000300
+#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_IRQ_VECTOR 0x1b
+#define NE2000_BYTE volatile unsigned short
+#endif
+
+/****************************************************************************/
+
+/*
+ * Side-band address space for odd address requires re-mapping
+ * many of the standard ISA access functions.
+ */
+#ifdef NE2000_ODDOFFSET
+
+#undef outb
+#undef outb_p
+#undef inb
+#undef inb_p
+#undef outsb
+#undef outsw
+#undef insb
+#undef insw
+
+#define outb ne2000_outb
+#define inb ne2000_inb
+#define outb_p ne2000_outb
+#define inb_p ne2000_inb
+#define outsb ne2000_outsb
+#define outsw ne2000_outsw
+#define insb ne2000_insb
+#define insw ne2000_insw
+
+
+#ifndef COLDFIRE_NE2000_FUNCS
+
+void ne2000_outb(unsigned int val, unsigned int addr);
+int ne2000_inb(unsigned int addr);
+void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len);
+void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len);
+void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len);
+void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
+
+#else
+
+/*
+ * This macro converts a conventional register address into the
+ * real memory pointer of the mapped NE2000 device.
+ * On most NE2000 implementations on ColdFire boards the chip is
+ * mapped in kinda funny, due to its ISA heritage.
+ */
+#define NE2000_PTR(addr) ((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
+#define NE2000_DATA_PTR(addr) (addr)
+
+
+void ne2000_outb(unsigned int val, unsigned int addr)
+{
+ NE2000_BYTE *rp;
+
+ rp = (NE2000_BYTE *) NE2000_PTR(addr);
+ *rp = RSWAP(val);
+}
+
+int ne2000_inb(unsigned int addr)
+{
+ NE2000_BYTE *rp, val;
+
+ rp = (NE2000_BYTE *) NE2000_PTR(addr);
+ val = *rp;
+ return((int) ((NE2000_BYTE) RSWAP(val)));
+}
+
+void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len)
+{
+ NE2000_BYTE *rp, val;
+ unsigned char *buf;
+
+ buf = (unsigned char *) vbuf;
+ rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
+ for (; (len > 0); len--) {
+ val = *rp;
+ *buf++ = RSWAP(val);
+ }
+}
+
+void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+ volatile unsigned short *rp;
+ unsigned short w, *buf;
+
+ buf = (unsigned short *) vbuf;
+ rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
+ for (; (len > 0); len--) {
+ w = *rp;
+ *buf++ = BSWAP(w);
+ }
+}
+
+void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len)
+{
+ NE2000_BYTE *rp, val;
+ unsigned char *buf;
+
+ buf = (unsigned char *) vbuf;
+ rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
+ for (; (len > 0); len--) {
+ val = *buf++;
+ *rp = RSWAP(val);
+ }
+}
+
+void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+ volatile unsigned short *rp;
+ unsigned short w, *buf;
+
+ buf = (unsigned short *) vbuf;
+ rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
+ for (; (len > 0); len--) {
+ w = *buf++;
+ *rp = BSWAP(w);
+ }
+}
+
+#endif /* COLDFIRE_NE2000_FUNCS */
+#endif /* NE2000_OFFOFFSET */
+
+/****************************************************************************/
+
+#ifdef COLDFIRE_NE2000_FUNCS
+
+/*
+ * Lastly the interrupt set up code...
+ * Minor differences between the different board types.
+ */
+
+#if defined(CONFIG_ARN5206)
+void ne2000_irqsetup(int irq)
+{
+ volatile unsigned char *icrp;
+
+ icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
+ *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2;
+ mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
+}
+#endif
+
+#if defined(CONFIG_M5206eC3)
+void ne2000_irqsetup(int irq)
+{
+ volatile unsigned char *icrp;
+
+ icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
+ *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
+ mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
+}
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
+void ne2000_irqsetup(int irq)
+{
+ mcf_autovector(irq);
+}
+#endif
+
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+void ne2000_irqsetup(int irq)
+{
+ volatile unsigned long *icrp;
+ volatile unsigned long *pitr;
+
+ /* The NE2000 device uses external IRQ3 */
+ icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
+ *icrp = (*icrp & 0x77077777) | 0x00d00000;
+
+ pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR);
+ *pitr = *pitr | 0x20000000;
+}
+
+void ne2000_irqack(int irq)
+{
+ volatile unsigned long *icrp;
+
+ /* The NE2000 device uses external IRQ3 */
+ icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
+ *icrp = (*icrp & 0x77777777) | 0x00800000;
+}
+#endif
+
+#if defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
+
+void ne2000_irqsetup(int irq)
+{
+ mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
+ mcf_autovector(irq);
+}
+
+#else
+
+void ne2000_irqsetup(int irq)
+{
+ mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
+}
+
+#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */
+#endif /* CONFIG_M5307 || CONFIG_M5407 */
+
+#endif /* COLDFIRE_NE2000_FUNCS */
+
+/****************************************************************************/
+#endif /* mcfne_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfpci.h -- PCI bridge on ColdFire eval boards.
+ *
+ * (C) Copyright 2000, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef mcfpci_h
+#define mcfpci_h
+/****************************************************************************/
+
+
+#ifdef CONFIG_PCI
+
+/*
+ * Address regions in the PCI address space are not mapped into the
+ * normal memory space of the ColdFire. They must be accessed via
+ * handler routines. This is easy for I/O space (inb/outb/etc) but
+ * needs some code changes to support ordinary memory. Interrupts
+ * also need to be vectored through the PCI handler first, then it
+ * will call the actual driver sub-handlers.
+ */
+
+/*
+ * Un-define all the standard I/O access routines.
+ */
+#undef inb
+#undef inw
+#undef inl
+#undef inb_p
+#undef inw_p
+#undef insb
+#undef insw
+#undef insl
+#undef outb
+#undef outw
+#undef outl
+#undef outb_p
+#undef outw_p
+#undef outsb
+#undef outsw
+#undef outsl
+
+#undef request_irq
+#undef free_irq
+
+#undef bus_to_virt
+#undef virt_to_bus
+
+
+/*
+ * Re-direct all I/O memory accesses functions to PCI specific ones.
+ */
+#define inb pci_inb
+#define inw pci_inw
+#define inl pci_inl
+#define inb_p pci_inb
+#define inw_p pci_inw
+#define insb pci_insb
+#define insw pci_insw
+#define insl pci_insl
+
+#define outb pci_outb
+#define outw pci_outw
+#define outl pci_outl
+#define outb_p pci_outb
+#define outw_p pci_outw
+#define outsb pci_outsb
+#define outsw pci_outsw
+#define outsl pci_outsl
+
+#define request_irq pci_request_irq
+#define free_irq pci_free_irq
+
+#define virt_to_bus pci_virt_to_bus
+#define bus_to_virt pci_bus_to_virt
+
+#define CONFIG_COMEMPCI 1
+
+
+/*
+ * Prototypes of the real PCI functions (defined in bios32.c).
+ */
+unsigned char pci_inb(unsigned int addr);
+unsigned short pci_inw(unsigned int addr);
+unsigned int pci_inl(unsigned int addr);
+void pci_insb(void *addr, void *buf, int len);
+void pci_insw(void *addr, void *buf, int len);
+void pci_insl(void *addr, void *buf, int len);
+
+void pci_outb(unsigned char val, unsigned int addr);
+void pci_outw(unsigned short val, unsigned int addr);
+void pci_outl(unsigned int val, unsigned int addr);
+void pci_outsb(void *addr, void *buf, int len);
+void pci_outsw(void *addr, void *buf, int len);
+void pci_outsl(void *addr, void *buf, int len);
+
+int pci_request_irq(unsigned int irq,
+ void (*handler)(int, void *, struct pt_regs *),
+ unsigned long flags,
+ const char *device,
+ void *dev_id);
+void pci_free_irq(unsigned int irq, void *dev_id);
+
+void *pci_bmalloc(int size);
+void pci_bmfree(void *bmp, int len);
+void pci_copytoshmem(unsigned long bmp, void *src, int size);
+void pci_copyfromshmem(void *dst, unsigned long bmp, int size);
+unsigned long pci_virt_to_bus(volatile void *address);
+void *pci_bus_to_virt(unsigned long address);
+void pci_bmcpyto(void *dst, void *src, int len);
+void pci_bmcpyfrom(void *dst, void *src, int len);
+
+#endif /* CONFIG_PCI */
+/****************************************************************************/
+#endif /* mcfpci_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfpit.h -- ColdFire internal PIT timer support defines.
+ *
+ * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef mcfpit_h
+#define mcfpit_h
+/****************************************************************************/
+
+
+/*
+ * Get address specific defines for the 5270/5271, 5280/5282, and 5208.
+ */
+#if defined(CONFIG_M520x)
+#define MCFPIT_BASE1 0x00080000 /* Base address of TIMER1 */
+#define MCFPIT_BASE2 0x00084000 /* Base address of TIMER2 */
+#else
+#define MCFPIT_BASE1 0x00150000 /* Base address of TIMER1 */
+#define MCFPIT_BASE2 0x00160000 /* Base address of TIMER2 */
+#define MCFPIT_BASE3 0x00170000 /* Base address of TIMER3 */
+#define MCFPIT_BASE4 0x00180000 /* Base address of TIMER4 */
+#endif
+
+/*
+ * Define the PIT timer register set addresses.
+ */
+#define MCFPIT_PCSR 0x0 /* PIT control register */
+#define MCFPIT_PMR 0x2 /* PIT modulus register */
+#define MCFPIT_PCNTR 0x4 /* PIT count register */
+
+/*
+ * Bit definitions for the PIT Control and Status register.
+ */
+#define MCFPIT_PCSR_CLK1 0x0000 /* System clock divisor */
+#define MCFPIT_PCSR_CLK2 0x0100 /* System clock divisor */
+#define MCFPIT_PCSR_CLK4 0x0200 /* System clock divisor */
+#define MCFPIT_PCSR_CLK8 0x0300 /* System clock divisor */
+#define MCFPIT_PCSR_CLK16 0x0400 /* System clock divisor */
+#define MCFPIT_PCSR_CLK32 0x0500 /* System clock divisor */
+#define MCFPIT_PCSR_CLK64 0x0600 /* System clock divisor */
+#define MCFPIT_PCSR_CLK128 0x0700 /* System clock divisor */
+#define MCFPIT_PCSR_CLK256 0x0800 /* System clock divisor */
+#define MCFPIT_PCSR_CLK512 0x0900 /* System clock divisor */
+#define MCFPIT_PCSR_CLK1024 0x0a00 /* System clock divisor */
+#define MCFPIT_PCSR_CLK2048 0x0b00 /* System clock divisor */
+#define MCFPIT_PCSR_CLK4096 0x0c00 /* System clock divisor */
+#define MCFPIT_PCSR_CLK8192 0x0d00 /* System clock divisor */
+#define MCFPIT_PCSR_CLK16384 0x0e00 /* System clock divisor */
+#define MCFPIT_PCSR_CLK32768 0x0f00 /* System clock divisor */
+#define MCFPIT_PCSR_DOZE 0x0040 /* Clock run in doze mode */
+#define MCFPIT_PCSR_HALTED 0x0020 /* Clock run in halt mode */
+#define MCFPIT_PCSR_OVW 0x0010 /* Overwrite PIT counter now */
+#define MCFPIT_PCSR_PIE 0x0008 /* Enable PIT interrupt */
+#define MCFPIT_PCSR_PIF 0x0004 /* PIT interrupt flag */
+#define MCFPIT_PCSR_RLD 0x0002 /* Reload counter */
+#define MCFPIT_PCSR_EN 0x0001 /* Enable PIT */
+#define MCFPIT_PCSR_DISABLE 0x0000 /* Disable PIT */
+
+/****************************************************************************/
+#endif /* mcfpit_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfsim.h -- ColdFire System Integration Module support.
+ *
+ * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef mcfsim_h
+#define mcfsim_h
+/****************************************************************************/
+
+
+/*
+ * Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282,
+ * 5307 or 5407 specific addresses.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#include <asm/m5206sim.h>
+#elif defined(CONFIG_M520x)
+#include <asm/m520xsim.h>
+#elif defined(CONFIG_M523x)
+#include <asm/m523xsim.h>
+#elif defined(CONFIG_M5249)
+#include <asm/m5249sim.h>
+#elif defined(CONFIG_M527x)
+#include <asm/m527xsim.h>
+#elif defined(CONFIG_M5272)
+#include <asm/m5272sim.h>
+#elif defined(CONFIG_M528x)
+#include <asm/m528xsim.h>
+#elif defined(CONFIG_M5307)
+#include <asm/m5307sim.h>
+#elif defined(CONFIG_M532x)
+#include <asm/m532xsim.h>
+#elif defined(CONFIG_M5407)
+#include <asm/m5407sim.h>
+#endif
+
+
+/*
+ * Define the base address of the SIM within the MBAR address space.
+ */
+#define MCFSIM_BASE 0x0 /* Base address of SIM */
+
+
+/*
+ * Bit definitions for the ICR family of registers.
+ */
+#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */
+#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */
+#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */
+#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */
+#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */
+#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */
+#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */
+#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */
+#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */
+
+#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */
+#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */
+#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */
+#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */
+
+/*
+ * Bit definitions for the Interrupt Mask register (IMR).
+ */
+#define MCFSIM_IMR_EINT1 0x0002 /* External intr # 1 */
+#define MCFSIM_IMR_EINT2 0x0004 /* External intr # 2 */
+#define MCFSIM_IMR_EINT3 0x0008 /* External intr # 3 */
+#define MCFSIM_IMR_EINT4 0x0010 /* External intr # 4 */
+#define MCFSIM_IMR_EINT5 0x0020 /* External intr # 5 */
+#define MCFSIM_IMR_EINT6 0x0040 /* External intr # 6 */
+#define MCFSIM_IMR_EINT7 0x0080 /* External intr # 7 */
+
+#define MCFSIM_IMR_SWD 0x0100 /* Software Watchdog intr */
+#define MCFSIM_IMR_TIMER1 0x0200 /* TIMER 1 intr */
+#define MCFSIM_IMR_TIMER2 0x0400 /* TIMER 2 intr */
+#define MCFSIM_IMR_MBUS 0x0800 /* MBUS intr */
+#define MCFSIM_IMR_UART1 0x1000 /* UART 1 intr */
+#define MCFSIM_IMR_UART2 0x2000 /* UART 2 intr */
+
+#if defined(CONFIG_M5206e)
+#define MCFSIM_IMR_DMA1 0x4000 /* DMA 1 intr */
+#define MCFSIM_IMR_DMA2 0x8000 /* DMA 2 intr */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307)
+#define MCFSIM_IMR_DMA0 0x4000 /* DMA 0 intr */
+#define MCFSIM_IMR_DMA1 0x8000 /* DMA 1 intr */
+#define MCFSIM_IMR_DMA2 0x10000 /* DMA 2 intr */
+#define MCFSIM_IMR_DMA3 0x20000 /* DMA 3 intr */
+#endif
+
+/*
+ * Mask for all of the SIM devices. Some parts have more or less
+ * SIM devices. This is a catchall for the sandard set.
+ */
+#ifndef MCFSIM_IMR_MASKALL
+#define MCFSIM_IMR_MASKALL 0x3ffe /* All intr sources */
+#endif
+
+
+/*
+ * PIT interrupt settings, if not found in mXXXXsim.h file.
+ */
+#ifndef ICR_INTRCONF
+#define ICR_INTRCONF 0x2b /* PIT1 level 5, priority 3 */
+#endif
+#ifndef MCFPIT_IMR
+#define MCFPIT_IMR MCFINTC_IMRH
+#endif
+#ifndef MCFPIT_IMR_IBIT
+#define MCFPIT_IMR_IBIT (1 << (MCFINT_PIT1 - 32))
+#endif
+
+
+#ifndef __ASSEMBLY__
+/*
+ * Definition for the interrupt auto-vectoring support.
+ */
+extern void mcf_autovector(unsigned int vec);
+#endif /* __ASSEMBLY__ */
+
+/****************************************************************************/
+#endif /* mcfsim_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfsmc.h -- SMC ethernet support for ColdFire environments.
+ *
+ * (C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef mcfsmc_h
+#define mcfsmc_h
+/****************************************************************************/
+
+/*
+ * None of the current ColdFire targets that use the SMC91x111
+ * allow 8 bit accesses. So this code is 16bit access only.
+ */
+
+
+#undef outb
+#undef inb
+#undef outw
+#undef outwd
+#undef inw
+#undef outl
+#undef inl
+
+#undef outsb
+#undef outsw
+#undef outsl
+#undef insb
+#undef insw
+#undef insl
+
+/*
+ * Re-defines for ColdFire environment... The SMC part is
+ * mapped into memory space, so remap the PC-style in/out
+ * routines to handle that.
+ */
+#define outb smc_outb
+#define inb smc_inb
+#define outw smc_outw
+#define outwd smc_outwd
+#define inw smc_inw
+#define outl smc_outl
+#define inl smc_inl
+
+#define outsb smc_outsb
+#define outsw smc_outsw
+#define outsl smc_outsl
+#define insb smc_insb
+#define insw smc_insw
+#define insl smc_insl
+
+
+static inline int smc_inb(unsigned int addr)
+{
+ register unsigned short w;
+ w = *((volatile unsigned short *) (addr & ~0x1));
+ return(((addr & 0x1) ? w : (w >> 8)) & 0xff);
+}
+
+static inline void smc_outw(unsigned int val, unsigned int addr)
+{
+ *((volatile unsigned short *) addr) = (val << 8) | (val >> 8);
+}
+
+static inline int smc_inw(unsigned int addr)
+{
+ register unsigned short w;
+ w = *((volatile unsigned short *) addr);
+ return(((w << 8) | (w >> 8)) & 0xffff);
+}
+
+static inline void smc_outl(unsigned long val, unsigned int addr)
+{
+ *((volatile unsigned long *) addr) =
+ ((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) |
+ ((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff);
+}
+
+static inline void smc_outwd(unsigned int val, unsigned int addr)
+{
+ *((volatile unsigned short *) addr) = val;
+}
+
+
+/*
+ * The rep* functions are used to feed the data port with
+ * raw data. So we do not byte swap them when copying.
+ */
+
+static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len)
+{
+ volatile unsigned short *rp;
+ unsigned short *buf, *ebuf;
+
+ buf = (unsigned short *) vbuf;
+ rp = (volatile unsigned short *) addr;
+
+ /* Copy as words for as long as possible */
+ for (ebuf = buf + (len >> 1); (buf < ebuf); )
+ *buf++ = *rp;
+
+ /* Lastly, handle left over byte */
+ if (len & 0x1)
+ *((unsigned char *) buf) = (*rp >> 8) & 0xff;
+}
+
+static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+ volatile unsigned short *rp;
+ unsigned short *buf, *ebuf;
+
+ buf = (unsigned short *) vbuf;
+ rp = (volatile unsigned short *) addr;
+ for (ebuf = buf + len; (buf < ebuf); )
+ *buf++ = *rp;
+}
+
+static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len)
+{
+ volatile unsigned long *rp;
+ unsigned long *buf, *ebuf;
+
+ buf = (unsigned long *) vbuf;
+ rp = (volatile unsigned long *) addr;
+ for (ebuf = buf + len; (buf < ebuf); )
+ *buf++ = *rp;
+}
+
+static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+ volatile unsigned short *rp;
+ unsigned short *buf, *ebuf;
+
+ buf = (unsigned short *) vbuf;
+ rp = (volatile unsigned short *) addr;
+ for (ebuf = buf + len; (buf < ebuf); )
+ *rp = *buf++;
+}
+
+static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len)
+{
+ volatile unsigned long *rp;
+ unsigned long *buf, *ebuf;
+
+ buf = (unsigned long *) vbuf;
+ rp = (volatile unsigned long *) addr;
+ for (ebuf = buf + len; (buf < ebuf); )
+ *rp = *buf++;
+}
+
+
+#ifdef CONFIG_NETtel
+/*
+ * Re-map the address space of at least one of the SMC ethernet
+ * parts. Both parts power up decoding the same address, so we
+ * need to move one of them first, before doing enything else.
+ *
+ * We also increase the number of wait states for this part by one.
+ */
+
+void smc_remap(unsigned int ioaddr)
+{
+ static int once = 0;
+ extern unsigned short ppdata;
+ if (once++ == 0) {
+ *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec;
+ ppdata |= 0x0080;
+ *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+ outw(0x0001, ioaddr + BANK_SELECT);
+ outw(0x0001, ioaddr + BANK_SELECT);
+ outw(0x0067, ioaddr + BASE);
+
+ ppdata &= ~0x0080;
+ *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+ }
+
+ *((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180;
+}
+
+#endif
+
+/****************************************************************************/
+#endif /* mcfsmc_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcftimer.h -- ColdFire internal TIMER support defines.
+ *
+ * (C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com>
+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef mcftimer_h
+#define mcftimer_h
+/****************************************************************************/
+
+
+/*
+ * Get address specific defines for this ColdFire member.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */
+#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */
+#elif defined(CONFIG_M5272)
+#define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */
+#define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */
+#define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */
+#define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */
+#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */
+#elif defined(CONFIG_M532x)
+#define MCFTIMER_BASE1 0xfc070000 /* Base address of TIMER1 */
+#define MCFTIMER_BASE2 0xfc074000 /* Base address of TIMER2 */
+#define MCFTIMER_BASE3 0xfc078000 /* Base address of TIMER3 */
+#define MCFTIMER_BASE4 0xfc07c000 /* Base address of TIMER4 */
+#endif
+
+
+/*
+ * Define the TIMER register set addresses.
+ */
+#define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */
+#define MCFTIMER_TRR 0x04 /* Timer Reference (r/w) */
+#define MCFTIMER_TCR 0x08 /* Timer Capture reg (r/w) */
+#define MCFTIMER_TCN 0x0C /* Timer Counter reg (r/w) */
+#if defined(CONFIG_M532x)
+#define MCFTIMER_TER 0x03 /* Timer Event reg (r/w) */
+#else
+#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */
+#endif
+
+/*
+ * Bit definitions for the Timer Mode Register (TMR).
+ * Register bit flags are common accross ColdFires.
+ */
+#define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */
+#define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */
+#define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */
+#define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */
+#define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */
+#define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */
+#define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */
+#define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */
+#define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */
+#define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */
+#define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */
+#define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */
+#define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */
+#define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */
+#define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */
+#define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */
+#define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */
+
+/*
+ * Bit definitions for the Timer Event Registers (TER).
+ */
+#define MCFTIMER_TER_CAP 0x01 /* Capture event */
+#define MCFTIMER_TER_REF 0x02 /* Refernece event */
+
+/****************************************************************************/
+#endif /* mcftimer_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfuart.h -- ColdFire internal UART support defines.
+ *
+ * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef mcfuart_h
+#define mcfuart_h
+/****************************************************************************/
+
+/*
+ * Define the base address of the UARTS within the MBAR address
+ * space.
+ */
+#if defined(CONFIG_M5272)
+#define MCFUART_BASE1 0x100 /* Base address of UART1 */
+#define MCFUART_BASE2 0x140 /* Base address of UART2 */
+#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#if defined(CONFIG_NETtel)
+#define MCFUART_BASE1 0x180 /* Base address of UART1 */
+#define MCFUART_BASE2 0x140 /* Base address of UART2 */
+#else
+#define MCFUART_BASE1 0x140 /* Base address of UART1 */
+#define MCFUART_BASE2 0x180 /* Base address of UART2 */
+#endif
+#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define MCFUART_BASE1 0x200 /* Base address of UART1 */
+#define MCFUART_BASE2 0x240 /* Base address of UART2 */
+#define MCFUART_BASE3 0x280 /* Base address of UART3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
+#define MCFUART_BASE1 0x200 /* Base address of UART1 */
+#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */
+#else
+#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
+#define MCFUART_BASE2 0x200 /* Base address of UART2 */
+#endif
+#elif defined(CONFIG_M520x)
+#define MCFUART_BASE1 0x60000 /* Base address of UART1 */
+#define MCFUART_BASE2 0x64000 /* Base address of UART2 */
+#define MCFUART_BASE3 0x68000 /* Base address of UART2 */
+#elif defined(CONFIG_M532x)
+#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */
+#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */
+#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */
+#endif
+
+
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+struct mcf_platform_uart {
+ unsigned long mapbase; /* Physical address base */
+ void __iomem *membase; /* Virtual address if mapped */
+ unsigned int irq; /* Interrupt vector */
+ unsigned int uartclk; /* UART clock rate */
+};
+
+/*
+ * Define the ColdFire UART register set addresses.
+ */
+#define MCFUART_UMR 0x00 /* Mode register (r/w) */
+#define MCFUART_USR 0x04 /* Status register (r) */
+#define MCFUART_UCSR 0x04 /* Clock Select (w) */
+#define MCFUART_UCR 0x08 /* Command register (w) */
+#define MCFUART_URB 0x0c /* Receiver Buffer (r) */
+#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */
+#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */
+#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */
+#define MCFUART_UISR 0x14 /* Interrupt Status (r) */
+#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */
+#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */
+#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */
+#ifdef CONFIG_M5272
+#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */
+#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */
+#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */
+#else
+#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */
+#endif
+#define MCFUART_UIPR 0x34 /* Input Port (r) */
+#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */
+#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */
+
+
+/*
+ * Define bit flags in Mode Register 1 (MR1).
+ */
+#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */
+#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */
+#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */
+#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */
+#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */
+
+#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */
+#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */
+#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */
+#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */
+#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */
+
+#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */
+#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */
+#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */
+#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */
+
+/*
+ * Define bit flags in Mode Register 2 (MR2).
+ */
+#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */
+#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */
+#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */
+#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */
+#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */
+
+#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */
+#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */
+#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */
+
+/*
+ * Define bit flags in Status Register (USR).
+ */
+#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */
+#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */
+#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */
+#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */
+#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */
+#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */
+#define MCFUART_USR_RXFULL 0x02 /* Receiver full */
+#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */
+
+#define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
+ MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
+
+/*
+ * Define bit flags in Clock Select Register (UCSR).
+ */
+#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */
+#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */
+#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */
+
+#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */
+#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */
+#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */
+
+/*
+ * Define bit flags in Command Register (UCR).
+ */
+#define MCFUART_UCR_CMDNULL 0x00 /* No command */
+#define MCFUART_UCR_CMDRESETMRPTR 0x10 /* Reset MR pointer */
+#define MCFUART_UCR_CMDRESETRX 0x20 /* Reset receiver */
+#define MCFUART_UCR_CMDRESETTX 0x30 /* Reset transmitter */
+#define MCFUART_UCR_CMDRESETERR 0x40 /* Reset error status */
+#define MCFUART_UCR_CMDRESETBREAK 0x50 /* Reset BREAK change */
+#define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */
+#define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */
+
+#define MCFUART_UCR_TXNULL 0x00 /* No TX command */
+#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */
+#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */
+#define MCFUART_UCR_RXNULL 0x00 /* No RX command */
+#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */
+#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */
+
+/*
+ * Define bit flags in Input Port Change Register (UIPCR).
+ */
+#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */
+#define MCFUART_UIPCR_CTS 0x01 /* CTS value */
+
+/*
+ * Define bit flags in Input Port Register (UIP).
+ */
+#define MCFUART_UIPR_CTS 0x01 /* CTS value */
+
+/*
+ * Define bit flags in Output Port Registers (UOP).
+ * Clear bit by writing to UOP0, set by writing to UOP1.
+ */
+#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */
+
+/*
+ * Define bit flags in the Auxiliary Control Register (UACR).
+ */
+#define MCFUART_UACR_IEC 0x01 /* Input enable control */
+
+/*
+ * Define bit flags in Interrupt Status Register (UISR).
+ * These same bits are used for the Interrupt Mask Register (UIMR).
+ */
+#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */
+#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */
+#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */
+#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */
+
+#ifdef CONFIG_M5272
+/*
+ * Define bit flags in the Transmitter FIFO Register (UTF).
+ */
+#define MCFUART_UTF_TXB 0x1f /* Transmitter data level */
+#define MCFUART_UTF_FULL 0x20 /* Transmitter fifo full */
+#define MCFUART_UTF_TXS 0xc0 /* Transmitter status */
+
+/*
+ * Define bit flags in the Receiver FIFO Register (URF).
+ */
+#define MCFUART_URF_RXB 0x1f /* Receiver data level */
+#define MCFUART_URF_FULL 0x20 /* Receiver fifo full */
+#define MCFUART_URF_RXS 0xc0 /* Receiver status */
+#endif
+
+/****************************************************************************/
+#endif /* mcfuart_h */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * mcfdebug.h -- ColdFire Debug Module support.
+ *
+ * (C) Copyright 2001, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef mcfdebug_h
+#define mcfdebug_h
+/****************************************************************************/
+
+/* Define the debug module registers */
+#define MCFDEBUG_CSR 0x0 /* Configuration status */
+#define MCFDEBUG_BAAR 0x5 /* BDM address attribute */
+#define MCFDEBUG_AATR 0x6 /* Address attribute trigger */
+#define MCFDEBUG_TDR 0x7 /* Trigger definition */
+#define MCFDEBUG_PBR 0x8 /* PC breakpoint */
+#define MCFDEBUG_PBMR 0x9 /* PC breakpoint mask */
+#define MCFDEBUG_ABHR 0xc /* High address breakpoint */
+#define MCFDEBUG_ABLR 0xd /* Low address breakpoint */
+#define MCFDEBUG_DBR 0xe /* Data breakpoint */
+#define MCFDEBUG_DBMR 0xf /* Data breakpoint mask */
+
+/* Define some handy constants for the trigger definition register */
+#define MCFDEBUG_TDR_TRC_DISP 0x00000000 /* display on DDATA only */
+#define MCFDEBUG_TDR_TRC_HALT 0x40000000 /* Processor halt on BP */
+#define MCFDEBUG_TDR_TRC_INTR 0x80000000 /* Debug intr on BP */
+#define MCFDEBUG_TDR_LXT1 0x00004000 /* TDR level 1 */
+#define MCFDEBUG_TDR_LXT2 0x00008000 /* TDR level 2 */
+#define MCFDEBUG_TDR_EBL1 0x00002000 /* Enable breakpoint level 1 */
+#define MCFDEBUG_TDR_EBL2 0x20000000 /* Enable breakpoint level 2 */
+#define MCFDEBUG_TDR_EDLW1 0x00001000 /* Enable data BP longword */
+#define MCFDEBUG_TDR_EDLW2 0x10000000
+#define MCFDEBUG_TDR_EDWL1 0x00000800 /* Enable data BP lower word */
+#define MCFDEBUG_TDR_EDWL2 0x08000000
+#define MCFDEBUG_TDR_EDWU1 0x00000400 /* Enable data BP upper word */
+#define MCFDEBUG_TDR_EDWU2 0x04000000
+#define MCFDEBUG_TDR_EDLL1 0x00000200 /* Enable data BP low low byte */
+#define MCFDEBUG_TDR_EDLL2 0x02000000
+#define MCFDEBUG_TDR_EDLM1 0x00000100 /* Enable data BP low mid byte */
+#define MCFDEBUG_TDR_EDLM2 0x01000000
+#define MCFDEBUG_TDR_EDUM1 0x00000080 /* Enable data BP up mid byte */
+#define MCFDEBUG_TDR_EDUM2 0x00800000
+#define MCFDEBUG_TDR_EDUU1 0x00000040 /* Enable data BP up up byte */
+#define MCFDEBUG_TDR_EDUU2 0x00400000
+#define MCFDEBUG_TDR_DI1 0x00000020 /* Data BP invert */
+#define MCFDEBUG_TDR_DI2 0x00200000
+#define MCFDEBUG_TDR_EAI1 0x00000010 /* Enable address BP inverted */
+#define MCFDEBUG_TDR_EAI2 0x00100000
+#define MCFDEBUG_TDR_EAR1 0x00000008 /* Enable address BP range */
+#define MCFDEBUG_TDR_EAR2 0x00080000
+#define MCFDEBUG_TDR_EAL1 0x00000004 /* Enable address BP low */
+#define MCFDEBUG_TDR_EAL2 0x00040000
+#define MCFDEBUG_TDR_EPC1 0x00000002 /* Enable PC BP */
+#define MCFDEBUG_TDR_EPC2 0x00020000
+#define MCFDEBUG_TDR_PCI1 0x00000001 /* PC BP invert */
+#define MCFDEBUG_TDR_PCI2 0x00010000
+
+/* Constants for the address attribute trigger register */
+#define MCFDEBUG_AAR_RESET 0x00000005
+/* Fields not yet implemented */
+
+/* And some definitions for the writable sections of the CSR */
+#define MCFDEBUG_CSR_RESET 0x00100000
+#define MCFDEBUG_CSR_PSTCLK 0x00020000 /* PSTCLK disable */
+#define MCFDEBUG_CSR_IPW 0x00010000 /* Inhibit processor writes */
+#define MCFDEBUG_CSR_MAP 0x00008000 /* Processor refs in emul mode */
+#define MCFDEBUG_CSR_TRC 0x00004000 /* Emul mode on trace exception */
+#define MCFDEBUG_CSR_EMU 0x00002000 /* Force emulation mode */
+#define MCFDEBUG_CSR_DDC_READ 0x00000800 /* Debug data control */
+#define MCFDEBUG_CSR_DDC_WRITE 0x00001000
+#define MCFDEBUG_CSR_UHE 0x00000400 /* User mode halt enable */
+#define MCFDEBUG_CSR_BTB0 0x00000000 /* Branch target 0 bytes */
+#define MCFDEBUG_CSR_BTB2 0x00000100 /* Branch target 2 bytes */
+#define MCFDEBUG_CSR_BTB3 0x00000200 /* Branch target 3 bytes */
+#define MCFDEBUG_CSR_BTB4 0x00000300 /* Branch target 4 bytes */
+#define MCFDEBUG_CSR_NPL 0x00000040 /* Non-pipelined mode */
+#define MCFDEBUG_CSR_SSM 0x00000010 /* Single step mode */
+
+/* Constants for the BDM address attribute register */
+#define MCFDEBUG_BAAR_RESET 0x00000005
+/* Fields not yet implemented */
+
+
+/* This routine wrappers up the wdebug asm instruction so that the register
+ * and value can be relatively easily specified. The biggest hassle here is
+ * that the debug module instructions (2 longs) must be long word aligned and
+ * some pointer fiddling is performed to ensure this.
+ */
+static inline void wdebug(int reg, unsigned long data) {
+ unsigned short dbg_spc[6];
+ unsigned short *dbg;
+
+ // Force alignment to long word boundary
+ dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc);
+
+ // Build up the debug instruction
+ dbg[0] = 0x2c80 | (reg & 0xf);
+ dbg[1] = (data >> 16) & 0xffff;
+ dbg[2] = data & 0xffff;
+ dbg[3] = 0;
+
+ // Perform the wdebug instruction
+#if 0
+ // This strain is for gas which doesn't have the wdebug instructions defined
+ asm( "move.l %0, %%a0\n\t"
+ ".word 0xfbd0\n\t"
+ ".word 0x0003\n\t"
+ :: "g" (dbg) : "a0");
+#else
+ // And this is for when it does
+ asm( "wdebug (%0)" :: "a" (dbg));
+#endif
+}
+
+#endif
--- /dev/null
+#include <asm-m68k/md.h>
--- /dev/null
+#include <asm-m68k/mman.h>
--- /dev/null
+#ifndef __M68KNOMMU_MMU_H
+#define __M68KNOMMU_MMU_H
+
+/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
+
+typedef struct {
+ struct vm_list_struct *vmlist;
+ unsigned long end_brk;
+} mm_context_t;
+
+#endif /* __M68KNOMMU_MMU_H */
--- /dev/null
+#ifndef __M68KNOMMU_MMU_CONTEXT_H
+#define __M68KNOMMU_MMU_CONTEXT_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ // mm->context = virt_to_phys(mm->pgd);
+ return(0);
+}
+
+#define destroy_context(mm) do { } while(0)
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+}
+
+#define deactivate_mm(tsk,mm) do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+ struct mm_struct *next_mm)
+{
+}
+
+#endif
--- /dev/null
+#ifndef ASM_M68KNOMMU_MODULE_H
+#define ASM_M68KNOMMU_MODULE_H
+
+struct mod_arch_specific {
+};
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+#endif /* ASM_M68KNOMMU_MODULE_H */
--- /dev/null
+#include <asm-m68k/movs.h>
--- /dev/null
+#include <asm-m68k/msgbuf.h>
--- /dev/null
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
--- /dev/null
+/****************************************************************************/
+
+/*
+ * nettel.h -- Lineo (formerly Moreton Bay) NETtel support.
+ *
+ * (C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com)
+ * (C) Copyright 2000-2001, Lineo Inc. (www.lineo.com)
+ * (C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef nettel_h
+#define nettel_h
+/****************************************************************************/
+
+
+/****************************************************************************/
+#ifdef CONFIG_NETtel
+/****************************************************************************/
+
+#ifdef CONFIG_COLDFIRE
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#endif
+
+/*---------------------------------------------------------------------------*/
+#if defined(CONFIG_M5307)
+/*
+ * NETtel/5307 based hardware first. DTR/DCD lines are wired to
+ * GPIO lines. Most of the LED's are driver through a latch
+ * connected to CS2.
+ */
+#define MCFPP_DCD1 0x0001
+#define MCFPP_DCD0 0x0002
+#define MCFPP_DTR1 0x0004
+#define MCFPP_DTR0 0x0008
+
+#define NETtel_LEDADDR 0x30400000
+
+#ifndef __ASSEMBLY__
+
+extern volatile unsigned short ppdata;
+
+/*
+ * These functions defined to give quasi generic access to the
+ * PPIO bits used for DTR/DCD.
+ */
+static __inline__ unsigned int mcf_getppdata(void)
+{
+ volatile unsigned short *pp;
+ pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+ return((unsigned int) *pp);
+}
+
+static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
+{
+ volatile unsigned short *pp;
+ pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+ ppdata = (ppdata & ~mask) | bits;
+ *pp = ppdata;
+}
+#endif
+
+/*---------------------------------------------------------------------------*/
+#elif defined(CONFIG_M5206e)
+/*
+ * NETtel/5206e based hardware has leds on latch on CS3.
+ * No support modem for lines??
+ */
+#define NETtel_LEDADDR 0x50000000
+
+/*---------------------------------------------------------------------------*/
+#elif defined(CONFIG_M5272)
+/*
+ * NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines.
+ */
+#define MCFPP_DCD0 0x0080
+#define MCFPP_DCD1 0x0000 /* Port 1 no DCD support */
+#define MCFPP_DTR0 0x0040
+#define MCFPP_DTR1 0x0000 /* Port 1 no DTR support */
+
+#ifndef __ASSEMBLY__
+/*
+ * These functions defined to give quasi generic access to the
+ * PPIO bits used for DTR/DCD.
+ */
+static __inline__ unsigned int mcf_getppdata(void)
+{
+ volatile unsigned short *pp;
+ pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
+ return((unsigned int) *pp);
+}
+
+static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
+{
+ volatile unsigned short *pp;
+ pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
+ *pp = (*pp & ~mask) | bits;
+}
+#endif
+
+#endif
+/*---------------------------------------------------------------------------*/
+
+/****************************************************************************/
+#endif /* CONFIG_NETtel */
+/****************************************************************************/
+#endif /* nettel_h */
--- /dev/null
+#include <asm-m68k/openprom.h>
--- /dev/null
+#include <asm-m68k/oplib.h>
--- /dev/null
+#ifndef _M68KNOMMU_PAGE_H
+#define _M68KNOMMU_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+
+#define PAGE_SHIFT (12)
+#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+
+#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr) free_page(addr)
+
+#define clear_page(page) memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg) clear_page(page)
+#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
+
+#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
+ alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x) ((x).pte)
+#define pmd_val(x) ((&x)->pmd[0])
+#define pgd_val(x) ((x).pgd)
+#define pgprot_val(x) ((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pmd(x) ((pmd_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x) ((pgprot_t) { (x) } )
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define PAGE_OFFSET (PAGE_OFFSET_RAW)
+
+#ifndef __ASSEMBLY__
+
+#define __pa(vaddr) virt_to_phys((void *)(vaddr))
+#define __va(paddr) phys_to_virt((unsigned long)(paddr))
+
+#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT)
+
+#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
+#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+
+#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn))
+#define page_to_pfn(page) virt_to_pfn(page_to_virt(page))
+#define pfn_valid(pfn) ((pfn) < max_mapnr)
+
+#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
+ ((void *)(kaddr) < (void *)memory_end))
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm-generic/page.h>
+
+#endif /* _M68KNOMMU_PAGE_H */
--- /dev/null
+
+
+/* This handles the memory map.. */
+#define PAGE_OFFSET_RAW CONFIG_RAMBASE
+
--- /dev/null
+#ifndef _M68KNOMMU_PARAM_H
+#define _M68KNOMMU_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ CONFIG_HZ
+#define USER_HZ HZ
+#define CLOCKS_PER_SEC (USER_HZ)
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE 4096
+
+#ifndef NOGROUP
+#define NOGROUP (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64 /* max length of hostname */
+
+#endif /* _M68KNOMMU_PARAM_H */
--- /dev/null
+#ifndef M68KNOMMU_PCI_H
+#define M68KNOMMU_PCI_H
+
+#include <asm-m68k/pci.h>
+
+#ifdef CONFIG_COMEMPCI
+/*
+ * These are pretty much arbitary with the CoMEM implementation.
+ * We have the whole address space to ourselves.
+ */
+#define PCIBIOS_MIN_IO 0x100
+#define PCIBIOS_MIN_MEM 0x00010000
+
+#define pcibios_scan_all_fns(a, b) 0
+
+/*
+ * Return whether the given PCI device DMA address mask can
+ * be supported properly. For example, if your device can
+ * only drive the low 24-bits during PCI bus mastering, then
+ * you would pass 0x00ffffff as the mask to this function.
+ */
+static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
+{
+ return 1;
+}
+
+#endif /* CONFIG_COMEMPCI */
+
+#endif /* M68KNOMMU_PCI_H */
--- /dev/null
+#ifndef __ARCH_M68KNOMMU_PERCPU__
+#define __ARCH_M68KNOMMU_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_M68KNOMMU_PERCPU__ */
--- /dev/null
+#ifndef _M68KNOMMU_PGALLOC_H
+#define _M68KNOMMU_PGALLOC_H
+
+#include <asm/setup.h>
+
+#define check_pgt_cache() do { } while (0)
+
+#endif /* _M68KNOMMU_PGALLOC_H */
--- /dev/null
+#ifndef _M68KNOMMU_PGTABLE_H
+#define _M68KNOMMU_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+/*
+ * (C) Copyright 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <linux/slab.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/io.h>
+
+/*
+ * Trivial page table functions.
+ */
+#define pgd_present(pgd) (1)
+#define pgd_none(pgd) (0)
+#define pgd_bad(pgd) (0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr) (1)
+#define pmd_offset(a, b) ((void *)0)
+
+#define PAGE_NONE __pgprot(0)
+#define PAGE_SHARED __pgprot(0)
+#define PAGE_COPY __pgprot(0)
+#define PAGE_READONLY __pgprot(0)
+#define PAGE_KERNEL __pgprot(0)
+
+extern void paging_init(void);
+#define swapper_pg_dir ((pgd_t *) 0)
+
+#define __swp_type(x) (0)
+#define __swp_offset(x) (0)
+#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+
+static inline int pte_file(pte_t pte) { return 0; }
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) (virt_to_page(0))
+
+/*
+ * These would be in other places but having them here reduces the diffs.
+ */
+extern unsigned int kobjsize(const void *objp);
+
+/*
+ * No page table caches to initialise.
+ */
+#define pgtable_cache_init() do { } while (0)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define VMALLOC_START 0
+#define VMALLOC_END 0xffffffff
+
+#include <asm-generic/pgtable.h>
+
+#endif /* _M68KNOMMU_PGTABLE_H */
--- /dev/null
+#include <asm-m68k/poll.h>
--- /dev/null
+#include <asm-m68k/posix_types.h>
--- /dev/null
+/*
+ * include/asm-m68knommu/processor.h
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#ifndef __ASM_M68K_PROCESSOR_H
+#define __ASM_M68K_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/compiler.h>
+#include <linux/threads.h>
+#include <asm/types.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+
+static inline unsigned long rdusp(void)
+{
+#ifdef CONFIG_COLDFIRE
+ extern unsigned int sw_usp;
+ return(sw_usp);
+#else
+ unsigned long usp;
+ __asm__ __volatile__("move %/usp,%0" : "=a" (usp));
+ return usp;
+#endif
+}
+
+static inline void wrusp(unsigned long usp)
+{
+#ifdef CONFIG_COLDFIRE
+ extern unsigned int sw_usp;
+ sw_usp = usp;
+#else
+ __asm__ __volatile__("move %0,%/usp" : : "a" (usp));
+#endif
+}
+
+/*
+ * User space process size: 3.75GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#define TASK_SIZE (0xF0000000UL)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's. We won't be using it
+ */
+#define TASK_UNMAPPED_BASE 0
+
+/*
+ * if you change this structure, you must change the code and offsets
+ * in m68k/machasm.S
+ */
+
+struct thread_struct {
+ unsigned long ksp; /* kernel stack pointer */
+ unsigned long usp; /* user stack pointer */
+ unsigned short sr; /* saved status register */
+ unsigned short fs; /* saved fs (sfc, dfc) */
+ unsigned long crp[2]; /* cpu root pointer */
+ unsigned long esp0; /* points to SR of stack frame */
+ unsigned long fp[8*3];
+ unsigned long fpcntl[3]; /* fp control regs */
+ unsigned char fpstate[FPSTATESIZE]; /* floating point state */
+};
+
+#define INIT_THREAD { \
+ sizeof(init_stack) + (unsigned long) init_stack, 0, \
+ PS_S, __KERNEL_DS, \
+ {0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \
+}
+
+/*
+ * Coldfire stacks need to be re-aligned on trap exit, conventional
+ * 68k can handle this case cleanly.
+ */
+#if defined(CONFIG_COLDFIRE)
+#define reformat(_regs) do { (_regs)->format = 0x4; } while(0)
+#else
+#define reformat(_regs) do { } while (0)
+#endif
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ *
+ * pass the data segment into user programs if it exists,
+ * it can't hurt anything as far as I can tell
+ */
+#define start_thread(_regs, _pc, _usp) \
+do { \
+ set_fs(USER_DS); /* reads from user space */ \
+ (_regs)->pc = (_pc); \
+ ((struct switch_stack *)(_regs))[-1].a6 = 0; \
+ reformat(_regs); \
+ if (current->mm) \
+ (_regs)->d5 = current->mm->start_data; \
+ (_regs)->sr &= ~0x2000; \
+ wrusp(_usp); \
+} while(0)
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk) do { } while (0)
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+unsigned long thread_saved_pc(struct task_struct *tsk);
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk) \
+ ({ \
+ unsigned long eip = 0; \
+ if ((tsk)->thread.esp0 > PAGE_SIZE && \
+ (virt_addr_valid((tsk)->thread.esp0))) \
+ eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
+ eip; })
+#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax() barrier()
+
+#endif
--- /dev/null
+#ifndef _M68K_PTRACE_H
+#define _M68K_PTRACE_H
+
+#define PT_D1 0
+#define PT_D2 1
+#define PT_D3 2
+#define PT_D4 3
+#define PT_D5 4
+#define PT_D6 5
+#define PT_D7 6
+#define PT_A0 7
+#define PT_A1 8
+#define PT_A2 9
+#define PT_A3 10
+#define PT_A4 11
+#define PT_A5 12
+#define PT_A6 13
+#define PT_D0 14
+#define PT_USP 15
+#define PT_ORIG_D0 16
+#define PT_SR 17
+#define PT_PC 18
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+ stack during a system call. */
+
+struct pt_regs {
+ long d1;
+ long d2;
+ long d3;
+ long d4;
+ long d5;
+ long a0;
+ long a1;
+ long a2;
+ long d0;
+ long orig_d0;
+ long stkadj;
+#ifdef CONFIG_COLDFIRE
+ unsigned format : 4; /* frame format specifier */
+ unsigned vector : 12; /* vector offset */
+ unsigned short sr;
+ unsigned long pc;
+#else
+ unsigned short sr;
+ unsigned long pc;
+ unsigned format : 4; /* frame format specifier */
+ unsigned vector : 12; /* vector offset */
+#endif
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+ unsigned long d6;
+ unsigned long d7;
+ unsigned long a3;
+ unsigned long a4;
+ unsigned long a5;
+ unsigned long a6;
+ unsigned long retpc;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
+
+#ifdef __KERNEL__
+
+#ifndef PS_S
+#define PS_S (0x2000)
+#define PS_M (0x1000)
+#endif
+
+#define user_mode(regs) (!((regs)->sr & PS_S))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _M68K_PTRACE_H */
--- /dev/null
+/***********************************
+ * $Id: quicc_simple.h,v 1.1 2002/03/02 15:01:10 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Simple drivers common header
+ ***************************************
+ */
+
+#ifndef __SIMPLE_H
+#define __SIMPLE_H
+
+/* #include "quicc.h" */
+
+#define GLB_SCC_0 0
+#define GLB_SCC_1 1
+#define GLB_SCC_2 2
+#define GLB_SCC_3 3
+
+typedef void (int_routine)(unsigned short interrupt_event);
+typedef int_routine *int_routine_ptr;
+typedef void *(alloc_routine)(int length);
+typedef void (free_routine)(int scc_num, int channel_num, void *buf);
+typedef void (store_rx_buffer_routine)(int scc_num, int channel_num, void *buff, int length);
+typedef int (handle_tx_error_routine)(int scc_num, int channel_num, QUICC_BD *tbd);
+typedef void (handle_rx_error_routine)(int scc_num, int channel_num, QUICC_BD *rbd);
+typedef void (handle_lost_error_routine)(int scc_num, int channel_num);
+
+/* user defined functions for global errors */
+typedef void (handle_glob_overrun_routine)(int scc_number);
+typedef void (handle_glob_underrun_routine)(int scc_number);
+typedef void (glob_intr_q_overflow_routine)(int scc_number);
+
+/*
+ * General initialization and command routines
+ */
+void quicc_issue_cmd (unsigned short cmd, int scc_num);
+void quicc_init(void);
+void quicc_scc_init(int scc_number, int number_of_rx_buf, int number_of_tx_buf);
+void quicc_smc_init(int smc_number, int number_of_rx_buf, int number_of_tx_buf);
+void quicc_scc_start(int scc_num);
+void quicc_scc_loopback(int scc_num);
+
+/* Interrupt enable/disable routines for critical pieces of code*/
+unsigned short IntrDis(void);
+void IntrEna(unsigned short old_sr);
+
+/* For debugging */
+void print_rbd(int scc_num);
+void print_tbd(int scc_num);
+
+#endif
--- /dev/null
+#include <asm-m68k/resource.h>
--- /dev/null
+#include <asm-m68k/rtc.h>
--- /dev/null
+#ifndef _M68KNOMMU_SCATTERLIST_H
+#define _M68KNOMMU_SCATTERLIST_H
+
+#include <linux/mm.h>
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+ unsigned long sg_magic;
+#endif
+ unsigned long page_link;
+ unsigned int offset;
+ dma_addr_t dma_address;
+ unsigned int length;
+};
+
+#define sg_dma_address(sg) ((sg)->dma_address)
+#define sg_dma_len(sg) ((sg)->length)
+
+#define ISA_DMA_THRESHOLD (0xffffffff)
+
+#endif /* !(_M68KNOMMU_SCATTERLIST_H) */
--- /dev/null
+#ifndef _M68KNOMMU_SECTIONS_H
+#define _M68KNOMMU_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+#endif
--- /dev/null
+#ifndef _M68K_SEGMENT_H
+#define _M68K_SEGMENT_H
+
+/* define constants */
+/* Address spaces (FC0-FC2) */
+#define USER_DATA (1)
+#ifndef __USER_DS
+#define __USER_DS (USER_DATA)
+#endif
+#define USER_PROGRAM (2)
+#define SUPER_DATA (5)
+#ifndef __KERNEL_DS
+#define __KERNEL_DS (SUPER_DATA)
+#endif
+#define SUPER_PROGRAM (6)
+#define CPU_SPACE (7)
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+#define USER_DS MAKE_MM_SEG(__USER_DS)
+#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS)
+
+/*
+ * Get/set the SFC/DFC registers for MOVES instructions
+ */
+
+static inline mm_segment_t get_fs(void)
+{
+ return USER_DS;
+}
+
+static inline mm_segment_t get_ds(void)
+{
+ /* return the supervisor data space code */
+ return KERNEL_DS;
+}
+
+static inline void set_fs(mm_segment_t val)
+{
+}
+
+#define segment_eq(a,b) ((a).seg == (b).seg)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68K_SEGMENT_H */
--- /dev/null
+#include <asm-m68k/sembuf.h>
--- /dev/null
+#ifdef __KERNEL__
+
+#include <asm-m68k/setup.h>
+
+/* We have a bigger command line buffer. */
+#undef COMMAND_LINE_SIZE
+
+#endif /* __KERNEL__ */
+
+#define COMMAND_LINE_SIZE 512
--- /dev/null
+#include <asm-m68k/shm.h>
--- /dev/null
+#include <asm-m68k/shmbuf.h>
--- /dev/null
+#include <asm-m68k/shmparam.h>
--- /dev/null
+#ifndef _ASM_M68KNOMMU_SIGCONTEXT_H
+#define _ASM_M68KNOMMU_SIGCONTEXT_H
+
+struct sigcontext {
+ unsigned long sc_mask; /* old sigmask */
+ unsigned long sc_usp; /* old user stack pointer */
+ unsigned long sc_d0;
+ unsigned long sc_d1;
+ unsigned long sc_a0;
+ unsigned long sc_a1;
+ unsigned long sc_a5;
+ unsigned short sc_sr;
+ unsigned long sc_pc;
+ unsigned short sc_formatvec;
+};
+
+#endif
--- /dev/null
+#ifndef _M68KNOMMU_SIGINFO_H
+#define _M68KNOMMU_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
--- /dev/null
+#ifndef _M68KNOMMU_SIGNAL_H
+#define _M68KNOMMU_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+#define NSIG 32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001
+#define SA_NOCLDWAIT 0x00000002
+#define SA_SIGINFO 0x00000004
+#define SA_ONSTACK 0x08000000
+#define SA_RESTART 0x10000000
+#define SA_NODEFER 0x40000000
+#define SA_RESETHAND 0x80000000
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+ __sighandler_t sa_handler;
+ old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction)(int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+#define sa_handler _u._sa_handler
+#define sa_sigaction _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+ void *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68KNOMMU_SIGNAL_H */
--- /dev/null
+/* nothing required here yet */
--- /dev/null
+#include <asm-m68k/socket.h>
--- /dev/null
+#include <asm-m68k/sockios.h>
--- /dev/null
+#include <asm-m68k/spinlock.h>
--- /dev/null
+#include <asm-m68k/stat.h>
--- /dev/null
+#include <asm-m68k/statfs.h>
--- /dev/null
+#ifndef _M68KNOMMU_STRING_H_
+#define _M68KNOMMU_STRING_H_
+
+#ifdef __KERNEL__ /* only set these up for kernel code */
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#define __HAVE_ARCH_STRCPY
+static inline char * strcpy(char * dest,const char *src)
+{
+ char *xdest = dest;
+
+ __asm__ __volatile__
+ ("1:\tmoveb %1@+,%0@+\n\t"
+ "jne 1b"
+ : "=a" (dest), "=a" (src)
+ : "0" (dest), "1" (src) : "memory");
+ return xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static inline char * strncpy(char *dest, const char *src, size_t n)
+{
+ char *xdest = dest;
+
+ if (n == 0)
+ return xdest;
+
+ __asm__ __volatile__
+ ("1:\tmoveb %1@+,%0@+\n\t"
+ "jeq 2f\n\t"
+ "subql #1,%2\n\t"
+ "jne 1b\n\t"
+ "2:"
+ : "=a" (dest), "=a" (src), "=d" (n)
+ : "0" (dest), "1" (src), "2" (n)
+ : "memory");
+ return xdest;
+}
+
+
+#ifndef CONFIG_COLDFIRE
+
+#define __HAVE_ARCH_STRCMP
+static inline int strcmp(const char * cs,const char * ct)
+{
+ char __res;
+
+ __asm__
+ ("1:\tmoveb %0@+,%2\n\t" /* get *cs */
+ "cmpb %1@+,%2\n\t" /* compare a byte */
+ "jne 2f\n\t" /* not equal, break out */
+ "tstb %2\n\t" /* at end of cs? */
+ "jne 1b\n\t" /* no, keep going */
+ "jra 3f\n\t" /* strings are equal */
+ "2:\tsubb %1@-,%2\n\t" /* *cs - *ct */
+ "3:"
+ : "=a" (cs), "=a" (ct), "=d" (__res)
+ : "0" (cs), "1" (ct));
+
+ return __res;
+}
+
+#define __HAVE_ARCH_STRNCMP
+static inline int strncmp(const char * cs,const char * ct,size_t count)
+{
+ char __res;
+
+ if (!count)
+ return 0;
+ __asm__
+ ("1:\tmovb %0@+,%3\n\t" /* get *cs */
+ "cmpb %1@+,%3\n\t" /* compare a byte */
+ "jne 3f\n\t" /* not equal, break out */
+ "tstb %3\n\t" /* at end of cs? */
+ "jeq 4f\n\t" /* yes, all done */
+ "subql #1,%2\n\t" /* no, adjust count */
+ "jne 1b\n\t" /* more to do, keep going */
+ "2:\tmoveq #0,%3\n\t" /* strings are equal */
+ "jra 4f\n\t"
+ "3:\tsubb %1@-,%3\n\t" /* *cs - *ct */
+ "4:"
+ : "=a" (cs), "=a" (ct), "=d" (count), "=d" (__res)
+ : "0" (cs), "1" (ct), "2" (count));
+ return __res;
+}
+
+#endif /* CONFIG_COLDFIRE */
+
+#define __HAVE_ARCH_MEMSET
+extern void * memset(void * s, int c, size_t count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *d, const void *s, size_t count);
+
+#else /* KERNEL */
+
+/*
+ * let user libraries deal with these,
+ * IMHO the kernel has no place defining these functions for user apps
+ */
+
+#define __HAVE_ARCH_STRCPY 1
+#define __HAVE_ARCH_STRNCPY 1
+#define __HAVE_ARCH_STRCAT 1
+#define __HAVE_ARCH_STRNCAT 1
+#define __HAVE_ARCH_STRCMP 1
+#define __HAVE_ARCH_STRNCMP 1
+#define __HAVE_ARCH_STRNICMP 1
+#define __HAVE_ARCH_STRCHR 1
+#define __HAVE_ARCH_STRRCHR 1
+#define __HAVE_ARCH_STRSTR 1
+#define __HAVE_ARCH_STRLEN 1
+#define __HAVE_ARCH_STRNLEN 1
+#define __HAVE_ARCH_MEMSET 1
+#define __HAVE_ARCH_MEMCPY 1
+#define __HAVE_ARCH_MEMMOVE 1
+#define __HAVE_ARCH_MEMSCAN 1
+#define __HAVE_ARCH_MEMCMP 1
+#define __HAVE_ARCH_MEMCHR 1
+#define __HAVE_ARCH_STRTOK 1
+
+#endif /* KERNEL */
+
+#endif /* _M68K_STRING_H_ */
--- /dev/null
+#ifndef _M68KNOMMU_SYSTEM_H
+#define _M68KNOMMU_SYSTEM_H
+
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/entry.h>
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing. This
+ * also clears the TS-flag if the task we switched to has used the
+ * math co-processor latest.
+ */
+/*
+ * switch_to() saves the extra registers, that are not saved
+ * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
+ * a0-a1. Some of these are used by schedule() and its predecessors
+ * and so we might get see unexpected behaviors when a task returns
+ * with unexpected register values.
+ *
+ * syscall stores these registers itself and none of them are used
+ * by syscall after the function in the syscall has been called.
+ *
+ * Beware that resume now expects *next to be in d1 and the offset of
+ * tss to be in a1. This saves a few instructions as we no longer have
+ * to push them onto the stack and read them back right after.
+ *
+ * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
+ *
+ * Changed 96/09/19 by Andreas Schwab
+ * pass prev in a0, next in a1, offset of tss in d1, and whether
+ * the mm structures are shared in d2 (to avoid atc flushing).
+ */
+asmlinkage void resume(void);
+#define switch_to(prev,next,last) \
+{ \
+ void *_last; \
+ __asm__ __volatile__( \
+ "movel %1, %%a0\n\t" \
+ "movel %2, %%a1\n\t" \
+ "jbsr resume\n\t" \
+ "movel %%d1, %0\n\t" \
+ : "=d" (_last) \
+ : "d" (prev), "d" (next) \
+ : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1"); \
+ (last) = _last; \
+}
+
+#ifdef CONFIG_COLDFIRE
+#define local_irq_enable() __asm__ __volatile__ ( \
+ "move %/sr,%%d0\n\t" \
+ "andi.l #0xf8ff,%%d0\n\t" \
+ "move %%d0,%/sr\n" \
+ : /* no outputs */ \
+ : \
+ : "cc", "%d0", "memory")
+#define local_irq_disable() __asm__ __volatile__ ( \
+ "move %/sr,%%d0\n\t" \
+ "ori.l #0x0700,%%d0\n\t" \
+ "move %%d0,%/sr\n" \
+ : /* no outputs */ \
+ : \
+ : "cc", "%d0", "memory")
+/* For spinlocks etc */
+#define local_irq_save(x) __asm__ __volatile__ ( \
+ "movew %%sr,%0\n\t" \
+ "movew #0x0700,%%d0\n\t" \
+ "or.l %0,%%d0\n\t" \
+ "movew %%d0,%/sr" \
+ : "=d" (x) \
+ : \
+ : "cc", "%d0", "memory")
+#else
+
+/* portable version */ /* FIXME - see entry.h*/
+#define ALLOWINT 0xf8ff
+
+#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory")
+#define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory")
+#endif
+
+#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory")
+#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory")
+
+/* For spinlocks etc */
+#ifndef local_irq_save
+#define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0)
+#endif
+
+#define irqs_disabled() \
+({ \
+ unsigned long flags; \
+ local_save_flags(flags); \
+ ((flags & 0x0700) == 0x0700); \
+})
+
+#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc")
+
+/*
+ * Force strict CPU ordering.
+ * Not really required on m68k...
+ */
+#define nop() asm volatile ("nop"::)
+#define mb() asm volatile ("" : : :"memory")
+#define rmb() asm volatile ("" : : :"memory")
+#define wmb() asm volatile ("" : : :"memory")
+#define set_mb(var, value) ({ (var) = (value); wmb(); })
+
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#define smp_read_barrier_depends() read_barrier_depends()
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() do { } while(0)
+#endif
+
+#define read_barrier_depends() ((void)0)
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+#ifndef CONFIG_RMW_INSNS
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+ unsigned long tmp, flags;
+
+ local_irq_save(flags);
+
+ switch (size) {
+ case 1:
+ __asm__ __volatile__
+ ("moveb %2,%0\n\t"
+ "moveb %1,%2"
+ : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ case 2:
+ __asm__ __volatile__
+ ("movew %2,%0\n\t"
+ "movew %1,%2"
+ : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ case 4:
+ __asm__ __volatile__
+ ("movel %2,%0\n\t"
+ "movel %1,%2"
+ : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ }
+ local_irq_restore(flags);
+ return tmp;
+}
+#else
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+ switch (size) {
+ case 1:
+ __asm__ __volatile__
+ ("moveb %2,%0\n\t"
+ "1:\n\t"
+ "casb %0,%1,%2\n\t"
+ "jne 1b"
+ : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ case 2:
+ __asm__ __volatile__
+ ("movew %2,%0\n\t"
+ "1:\n\t"
+ "casw %0,%1,%2\n\t"
+ "jne 1b"
+ : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ case 4:
+ __asm__ __volatile__
+ ("movel %2,%0\n\t"
+ "1:\n\t"
+ "casl %0,%1,%2\n\t"
+ "jne 1b"
+ : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ }
+ return x;
+}
+#endif
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+ (unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#ifndef CONFIG_SMP
+#include <asm-generic/cmpxchg.h>
+#endif
+
+#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \
+ defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 )
+#define HARD_RESET_NOW() ({ \
+ local_irq_disable(); \
+ asm(" \
+ moveal #0x10c00000, %a0; \
+ moveb #0, 0xFFFFF300; \
+ moveal 0(%a0), %sp; \
+ moveal 4(%a0), %a0; \
+ jmp (%a0); \
+ "); \
+})
+#endif
+
+#ifdef CONFIG_COLDFIRE
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+/*
+ * Need to account for broken early mask of 5272 silicon. So don't
+ * jump through the original start address. Jump strait into the
+ * known start of the FLASH code.
+ */
+#define HARD_RESET_NOW() ({ \
+ asm(" \
+ movew #0x2700, %sr; \
+ jmp 0xf0000400; \
+ "); \
+})
+#elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
+ defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
+#define HARD_RESET_NOW() ({ \
+ asm(" \
+ movew #0x2700, %sr; \
+ moveal #0x10000044, %a0; \
+ movel #0xffffffff, (%a0); \
+ moveal #0x10000001, %a0; \
+ moveb #0x00, (%a0); \
+ moveal #0xf0000004, %a0; \
+ moveal (%a0), %a0; \
+ jmp (%a0); \
+ "); \
+})
+#elif defined(CONFIG_M5272)
+/*
+ * Retrieve the boot address in flash using CSBR0 and CSOR0
+ * find the reset vector at flash_address + 4 (e.g. 0x400)
+ * remap it in the flash's current location (e.g. 0xf0000400)
+ * and jump there.
+ */
+#define HARD_RESET_NOW() ({ \
+ asm(" \
+ movew #0x2700, %%sr; \
+ move.l %0+0x40,%%d0; \
+ and.l %0+0x44,%%d0; \
+ andi.l #0xfffff000,%%d0; \
+ mov.l %%d0,%%a0; \
+ or.l 4(%%a0),%%d0; \
+ mov.l %%d0,%%a0; \
+ jmp (%%a0);" \
+ : /* No output */ \
+ : "o" (*(char *)MCF_MBAR) ); \
+})
+#elif defined(CONFIG_M528x)
+/*
+ * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR),
+ * that when set, resets the MCF528x.
+ */
+#define HARD_RESET_NOW() \
+({ \
+ unsigned char volatile *reset; \
+ asm("move.w #0x2700, %sr"); \
+ reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000)); \
+ while(1) \
+ *reset |= (0x01 << 7);\
+})
+#elif defined(CONFIG_M523x)
+#define HARD_RESET_NOW() ({ \
+ asm(" \
+ movew #0x2700, %sr; \
+ movel #0x01000000, %sp; \
+ moveal #0x40110000, %a0; \
+ moveb #0x80, (%a0); \
+ "); \
+})
+#elif defined(CONFIG_M520x)
+ /*
+ * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register
+ * RCR), that when set, resets the MCF5208.
+ */
+#define HARD_RESET_NOW() \
+({ \
+ unsigned char volatile *reset; \
+ asm("move.w #0x2700, %sr"); \
+ reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000)); \
+ while(1) \
+ *reset |= 0x80; \
+})
+#else
+#define HARD_RESET_NOW() ({ \
+ asm(" \
+ movew #0x2700, %sr; \
+ moveal #0x4, %a0; \
+ moveal (%a0), %a0; \
+ jmp (%a0); \
+ "); \
+})
+#endif
+#endif
+#define arch_align_stack(x) (x)
+
+
+static inline int irqs_disabled_flags(unsigned long flags)
+{
+ if (flags & 0x0700)
+ return 0;
+ else
+ return 1;
+}
+
+#endif /* _M68KNOMMU_SYSTEM_H */
--- /dev/null
+#include <asm-m68k/termbits.h>
--- /dev/null
+#include <asm-m68k/termios.h>
--- /dev/null
+/* thread_info.h: m68knommu low-level thread information
+ * adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com)
+ *
+ * Copyright (C) 2002 David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#include <asm/page.h>
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#ifdef CONFIG_4KSTACKS
+#define THREAD_SIZE_ORDER (0)
+#else
+#define THREAD_SIZE_ORDER (1)
+#endif
+
+/*
+ * for asm files, THREAD_SIZE is now generated by asm-offsets.c
+ */
+#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
+
+/*
+ * low level task data.
+ */
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+ int cpu; /* cpu we're on */
+ int preempt_count; /* 0 => preemptable, <0 => BUG */
+ struct restart_block restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+ struct thread_info *ti;
+ __asm__(
+ "move.l %%sp, %0 \n\t"
+ "and.l %1, %0"
+ : "=&d"(ti)
+ : "di" (~(THREAD_SIZE-1))
+ );
+ return ti;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE 0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_SIGPENDING 1 /* signal pending */
+#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
+#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling
+ TIF_NEED_RESCHED */
+#define TIF_MEMDIE 4
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
--- /dev/null
+/*
+ * linux/include/asm-m68knommu/timex.h
+ *
+ * m68knommu architecture timex specifications
+ */
+#ifndef _ASM_M68KNOMMU_TIMEX_H
+#define _ASM_M68KNOMMU_TIMEX_H
+
+#ifdef CONFIG_COLDFIRE
+#include <asm/coldfire.h>
+#define CLOCK_TICK_RATE MCF_CLK
+#else
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
+#endif
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+ return 0;
+}
+
+#endif
--- /dev/null
+#include <asm-m68k/tlb.h>
--- /dev/null
+#ifndef _M68KNOMMU_TLBFLUSH_H
+#define _M68KNOMMU_TLBFLUSH_H
+
+/*
+ * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
+ * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <asm/setup.h>
+
+/*
+ * flush all user-space atc entries.
+ */
+static inline void __flush_tlb(void)
+{
+ BUG();
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+ BUG();
+}
+
+#define flush_tlb() __flush_tlb()
+
+/*
+ * flush all atc entries (both kernel and user-space entries).
+ */
+static inline void flush_tlb_all(void)
+{
+ BUG();
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+ BUG();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+ BUG();
+}
+
+static inline void flush_tlb_range(struct mm_struct *mm,
+ unsigned long start, unsigned long end)
+{
+ BUG();
+}
+
+static inline void flush_tlb_kernel_page(unsigned long addr)
+{
+ BUG();
+}
+
+#endif /* _M68KNOMMU_TLBFLUSH_H */
--- /dev/null
+#ifndef _ASM_M68K_TOPOLOGY_H
+#define _ASM_M68K_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_M68K_TOPOLOGY_H */
--- /dev/null
+/*
+ * linux/include/asm/traps.h
+ *
+ * Copyright (C) 1993 Hamish Macdonald
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _M68KNOMMU_TRAPS_H
+#define _M68KNOMMU_TRAPS_H
+
+#ifndef __ASSEMBLY__
+
+typedef void (*e_vector)(void);
+
+extern e_vector vectors[];
+extern void init_vectors(void);
+extern void enable_vector(unsigned int irq);
+extern void disable_vector(unsigned int irq);
+extern void ack_vector(unsigned int irq);
+
+#endif
+
+#define VEC_BUSERR (2)
+#define VEC_ADDRERR (3)
+#define VEC_ILLEGAL (4)
+#define VEC_ZERODIV (5)
+#define VEC_CHK (6)
+#define VEC_TRAP (7)
+#define VEC_PRIV (8)
+#define VEC_TRACE (9)
+#define VEC_LINE10 (10)
+#define VEC_LINE11 (11)
+#define VEC_RESV1 (12)
+#define VEC_COPROC (13)
+#define VEC_FORMAT (14)
+#define VEC_UNINT (15)
+#define VEC_SPUR (24)
+#define VEC_INT1 (25)
+#define VEC_INT2 (26)
+#define VEC_INT3 (27)
+#define VEC_INT4 (28)
+#define VEC_INT5 (29)
+#define VEC_INT6 (30)
+#define VEC_INT7 (31)
+#define VEC_SYS (32)
+#define VEC_TRAP1 (33)
+#define VEC_TRAP2 (34)
+#define VEC_TRAP3 (35)
+#define VEC_TRAP4 (36)
+#define VEC_TRAP5 (37)
+#define VEC_TRAP6 (38)
+#define VEC_TRAP7 (39)
+#define VEC_TRAP8 (40)
+#define VEC_TRAP9 (41)
+#define VEC_TRAP10 (42)
+#define VEC_TRAP11 (43)
+#define VEC_TRAP12 (44)
+#define VEC_TRAP13 (45)
+#define VEC_TRAP14 (46)
+#define VEC_TRAP15 (47)
+#define VEC_FPBRUC (48)
+#define VEC_FPIR (49)
+#define VEC_FPDIVZ (50)
+#define VEC_FPUNDER (51)
+#define VEC_FPOE (52)
+#define VEC_FPOVER (53)
+#define VEC_FPNAN (54)
+#define VEC_FPUNSUP (55)
+#define VEC_UNIMPEA (60)
+#define VEC_UNIMPII (61)
+#define VEC_USER (64)
+
+#define VECOFF(vec) ((vec)<<2)
+
+#ifndef __ASSEMBLY__
+
+/* Status register bits */
+#define PS_T (0x8000)
+#define PS_S (0x2000)
+#define PS_M (0x1000)
+#define PS_C (0x0001)
+
+/* structure for stack frames */
+
+struct frame {
+ struct pt_regs ptregs;
+ union {
+ struct {
+ unsigned long iaddr; /* instruction address */
+ } fmt2;
+ struct {
+ unsigned long effaddr; /* effective address */
+ } fmt3;
+ struct {
+ unsigned long effaddr; /* effective address */
+ unsigned long pc; /* pc of faulted instr */
+ } fmt4;
+ struct {
+ unsigned long effaddr; /* effective address */
+ unsigned short ssw; /* special status word */
+ unsigned short wb3s; /* write back 3 status */
+ unsigned short wb2s; /* write back 2 status */
+ unsigned short wb1s; /* write back 1 status */
+ unsigned long faddr; /* fault address */
+ unsigned long wb3a; /* write back 3 address */
+ unsigned long wb3d; /* write back 3 data */
+ unsigned long wb2a; /* write back 2 address */
+ unsigned long wb2d; /* write back 2 data */
+ unsigned long wb1a; /* write back 1 address */
+ unsigned long wb1dpd0; /* write back 1 data/push data 0*/
+ unsigned long pd1; /* push data 1*/
+ unsigned long pd2; /* push data 2*/
+ unsigned long pd3; /* push data 3*/
+ } fmt7;
+ struct {
+ unsigned long iaddr; /* instruction address */
+ unsigned short int1[4]; /* internal registers */
+ } fmt9;
+ struct {
+ unsigned short int1;
+ unsigned short ssw; /* special status word */
+ unsigned short isc; /* instruction stage c */
+ unsigned short isb; /* instruction stage b */
+ unsigned long daddr; /* data cycle fault address */
+ unsigned short int2[2];
+ unsigned long dobuf; /* data cycle output buffer */
+ unsigned short int3[2];
+ } fmta;
+ struct {
+ unsigned short int1;
+ unsigned short ssw; /* special status word */
+ unsigned short isc; /* instruction stage c */
+ unsigned short isb; /* instruction stage b */
+ unsigned long daddr; /* data cycle fault address */
+ unsigned short int2[2];
+ unsigned long dobuf; /* data cycle output buffer */
+ unsigned short int3[4];
+ unsigned long baddr; /* stage B address */
+ unsigned short int4[2];
+ unsigned long dibuf; /* data cycle input buffer */
+ unsigned short int5[3];
+ unsigned ver : 4; /* stack frame version # */
+ unsigned int6:12;
+ unsigned short int7[18];
+ } fmtb;
+ } un;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68KNOMMU_TRAPS_H */
--- /dev/null
+#include <asm-m68k/types.h>
--- /dev/null
+#ifndef __M68KNOMMU_UACCESS_H
+#define __M68KNOMMU_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+#define access_ok(type,addr,size) _access_ok((unsigned long)(addr),(size))
+
+/*
+ * It is not enough to just have access_ok check for a real RAM address.
+ * This would disallow the case of code/ro-data running XIP in flash/rom.
+ * Ideally we would check the possible flash ranges too, but that is
+ * currently not so easy.
+ */
+static inline int _access_ok(unsigned long addr, unsigned long size)
+{
+ return 1;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+ unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+
+/*
+ * These are the main single-value transfer routines. They automatically
+ * use the right size if we just have the right pointer type.
+ */
+
+#define put_user(x, ptr) \
+({ \
+ int __pu_err = 0; \
+ typeof(*(ptr)) __pu_val = (x); \
+ switch (sizeof (*(ptr))) { \
+ case 1: \
+ __put_user_asm(__pu_err, __pu_val, ptr, b); \
+ break; \
+ case 2: \
+ __put_user_asm(__pu_err, __pu_val, ptr, w); \
+ break; \
+ case 4: \
+ __put_user_asm(__pu_err, __pu_val, ptr, l); \
+ break; \
+ case 8: \
+ memcpy(ptr, &__pu_val, sizeof (*(ptr))); \
+ break; \
+ default: \
+ __pu_err = __put_user_bad(); \
+ break; \
+ } \
+ __pu_err; \
+})
+#define __put_user(x, ptr) put_user(x, ptr)
+
+extern int __put_user_bad(void);
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#define __ptr(x) ((unsigned long *)(x))
+
+#define __put_user_asm(err,x,ptr,bwl) \
+ __asm__ ("move" #bwl " %0,%1" \
+ : /* no outputs */ \
+ :"d" (x),"m" (*__ptr(ptr)) : "memory")
+
+#define get_user(x, ptr) \
+({ \
+ int __gu_err = 0; \
+ typeof(x) __gu_val = 0; \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ __get_user_asm(__gu_err, __gu_val, ptr, b, "=d"); \
+ break; \
+ case 2: \
+ __get_user_asm(__gu_err, __gu_val, ptr, w, "=r"); \
+ break; \
+ case 4: \
+ __get_user_asm(__gu_err, __gu_val, ptr, l, "=r"); \
+ break; \
+ case 8: \
+ memcpy((void *) &__gu_val, ptr, sizeof (*(ptr))); \
+ break; \
+ default: \
+ __gu_val = 0; \
+ __gu_err = __get_user_bad(); \
+ break; \
+ } \
+ (x) = (typeof(*(ptr))) __gu_val; \
+ __gu_err; \
+})
+#define __get_user(x, ptr) get_user(x, ptr)
+
+extern int __get_user_bad(void);
+
+#define __get_user_asm(err,x,ptr,bwl,reg) \
+ __asm__ ("move" #bwl " %1,%0" \
+ : "=d" (x) \
+ : "m" (*__ptr(ptr)))
+
+#define copy_from_user(to, from, n) (memcpy(to, from, n), 0)
+#define copy_to_user(to, from, n) (memcpy(to, from, n), 0)
+
+#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
+#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; })
+
+#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; })
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+
+static inline long
+strncpy_from_user(char *dst, const char *src, long count)
+{
+ char *tmp;
+ strncpy(dst, src, count);
+ for (tmp = dst; *tmp && count > 0; tmp++, count--)
+ ;
+ return(tmp - dst); /* DAVIDM should we count a NUL ? check getname */
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+static inline long strnlen_user(const char *src, long n)
+{
+ return(strlen(src) + 1); /* DAVIDM make safer */
+}
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+/*
+ * Zero Userspace
+ */
+
+static inline unsigned long
+__clear_user(void *to, unsigned long n)
+{
+ memset(to, 0, n);
+ return 0;
+}
+
+#define clear_user(to,n) __clear_user(to,n)
+
+#endif /* _M68KNOMMU_UACCESS_H */
--- /dev/null
+#ifndef _M68KNOMMU_UCONTEXT_H
+#define _M68KNOMMU_UCONTEXT_H
+
+typedef int greg_t;
+#define NGREG 18
+typedef greg_t gregset_t[NGREG];
+
+typedef struct fpregset {
+ int f_pcr;
+ int f_psr;
+ int f_fpiaddr;
+ int f_fpregs[8][3];
+} fpregset_t;
+
+struct mcontext {
+ int version;
+ gregset_t gregs;
+ fpregset_t fpregs;
+};
+
+#define MCONTEXT_VERSION 2
+
+struct ucontext {
+ unsigned long uc_flags;
+ struct ucontext *uc_link;
+ stack_t uc_stack;
+ struct mcontext uc_mcontext;
+ unsigned long uc_filler[80];
+ sigset_t uc_sigmask; /* mask last for extensibility */
+};
+
+#endif
--- /dev/null
+#ifndef _ASM_M68KNOMMU_UNALIGNED_H
+#define _ASM_M68KNOMMU_UNALIGNED_H
+
+
+#ifdef CONFIG_COLDFIRE
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned __get_unaligned_be
+#define put_unaligned __put_unaligned_be
+
+#else
+/*
+ * The m68k can do unaligned accesses itself.
+ */
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned __get_unaligned_be
+#define put_unaligned __put_unaligned_be
+
+#endif
+
+#endif /* _ASM_M68KNOMMU_UNALIGNED_H */
--- /dev/null
+#ifndef _ASM_M68K_UNISTD_H_
+#define _ASM_M68K_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall 0
+#define __NR_exit 1
+#define __NR_fork 2
+#define __NR_read 3
+#define __NR_write 4
+#define __NR_open 5
+#define __NR_close 6
+#define __NR_waitpid 7
+#define __NR_creat 8
+#define __NR_link 9
+#define __NR_unlink 10
+#define __NR_execve 11
+#define __NR_chdir 12
+#define __NR_time 13
+#define __NR_mknod 14
+#define __NR_chmod 15
+#define __NR_chown 16
+#define __NR_break 17
+#define __NR_oldstat 18
+#define __NR_lseek 19
+#define __NR_getpid 20
+#define __NR_mount 21
+#define __NR_umount 22
+#define __NR_setuid 23
+#define __NR_getuid 24
+#define __NR_stime 25
+#define __NR_ptrace 26
+#define __NR_alarm 27
+#define __NR_oldfstat 28
+#define __NR_pause 29
+#define __NR_utime 30
+#define __NR_stty 31
+#define __NR_gtty 32
+#define __NR_access 33
+#define __NR_nice 34
+#define __NR_ftime 35
+#define __NR_sync 36
+#define __NR_kill 37
+#define __NR_rename 38
+#define __NR_mkdir 39
+#define __NR_rmdir 40
+#define __NR_dup 41
+#define __NR_pipe 42
+#define __NR_times 43
+#define __NR_prof 44
+#define __NR_brk 45
+#define __NR_setgid 46
+#define __NR_getgid 47
+#define __NR_signal 48
+#define __NR_geteuid 49
+#define __NR_getegid 50
+#define __NR_acct 51
+#define __NR_umount2 52
+#define __NR_lock 53
+#define __NR_ioctl 54
+#define __NR_fcntl 55
+#define __NR_mpx 56
+#define __NR_setpgid 57
+#define __NR_ulimit 58
+#define __NR_oldolduname 59
+#define __NR_umask 60
+#define __NR_chroot 61
+#define __NR_ustat 62
+#define __NR_dup2 63
+#define __NR_getppid 64
+#define __NR_getpgrp 65
+#define __NR_setsid 66
+#define __NR_sigaction 67
+#define __NR_sgetmask 68
+#define __NR_ssetmask 69
+#define __NR_setreuid 70
+#define __NR_setregid 71
+#define __NR_sigsuspend 72
+#define __NR_sigpending 73
+#define __NR_sethostname 74
+#define __NR_setrlimit 75
+#define __NR_getrlimit 76
+#define __NR_getrusage 77
+#define __NR_gettimeofday 78
+#define __NR_settimeofday 79
+#define __NR_getgroups 80
+#define __NR_setgroups 81
+#define __NR_select 82
+#define __NR_symlink 83
+#define __NR_oldlstat 84
+#define __NR_readlink 85
+#define __NR_uselib 86
+#define __NR_swapon 87
+#define __NR_reboot 88
+#define __NR_readdir 89
+#define __NR_mmap 90
+#define __NR_munmap 91
+#define __NR_truncate 92
+#define __NR_ftruncate 93
+#define __NR_fchmod 94
+#define __NR_fchown 95
+#define __NR_getpriority 96
+#define __NR_setpriority 97
+#define __NR_profil 98
+#define __NR_statfs 99
+#define __NR_fstatfs 100
+#define __NR_ioperm 101
+#define __NR_socketcall 102
+#define __NR_syslog 103
+#define __NR_setitimer 104
+#define __NR_getitimer 105
+#define __NR_stat 106
+#define __NR_lstat 107
+#define __NR_fstat 108
+#define __NR_olduname 109
+#define __NR_iopl /* 110 */ not supported
+#define __NR_vhangup 111
+#define __NR_idle /* 112 */ Obsolete
+#define __NR_vm86 /* 113 */ not supported
+#define __NR_wait4 114
+#define __NR_swapoff 115
+#define __NR_sysinfo 116
+#define __NR_ipc 117
+#define __NR_fsync 118
+#define __NR_sigreturn 119
+#define __NR_clone 120
+#define __NR_setdomainname 121
+#define __NR_uname 122
+#define __NR_cacheflush 123
+#define __NR_adjtimex 124
+#define __NR_mprotect 125
+#define __NR_sigprocmask 126
+#define __NR_create_module 127
+#define __NR_init_module 128
+#define __NR_delete_module 129
+#define __NR_get_kernel_syms 130
+#define __NR_quotactl 131
+#define __NR_getpgid 132
+#define __NR_fchdir 133
+#define __NR_bdflush 134
+#define __NR_sysfs 135
+#define __NR_personality 136
+#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
+#define __NR_setfsuid 138
+#define __NR_setfsgid 139
+#define __NR__llseek 140
+#define __NR_getdents 141
+#define __NR__newselect 142
+#define __NR_flock 143
+#define __NR_msync 144
+#define __NR_readv 145
+#define __NR_writev 146
+#define __NR_getsid 147
+#define __NR_fdatasync 148
+#define __NR__sysctl 149
+#define __NR_mlock 150
+#define __NR_munlock 151
+#define __NR_mlockall 152
+#define __NR_munlockall 153
+#define __NR_sched_setparam 154
+#define __NR_sched_getparam 155
+#define __NR_sched_setscheduler 156
+#define __NR_sched_getscheduler 157
+#define __NR_sched_yield 158
+#define __NR_sched_get_priority_max 159
+#define __NR_sched_get_priority_min 160
+#define __NR_sched_rr_get_interval 161
+#define __NR_nanosleep 162
+#define __NR_mremap 163
+#define __NR_setresuid 164
+#define __NR_getresuid 165
+#define __NR_getpagesize 166
+#define __NR_query_module 167
+#define __NR_poll 168
+#define __NR_nfsservctl 169
+#define __NR_setresgid 170
+#define __NR_getresgid 171
+#define __NR_prctl 172
+#define __NR_rt_sigreturn 173
+#define __NR_rt_sigaction 174
+#define __NR_rt_sigprocmask 175
+#define __NR_rt_sigpending 176
+#define __NR_rt_sigtimedwait 177
+#define __NR_rt_sigqueueinfo 178
+#define __NR_rt_sigsuspend 179
+#define __NR_pread64 180
+#define __NR_pwrite64 181
+#define __NR_lchown 182
+#define __NR_getcwd 183
+#define __NR_capget 184
+#define __NR_capset 185
+#define __NR_sigaltstack 186
+#define __NR_sendfile 187
+#define __NR_getpmsg 188 /* some people actually want streams */
+#define __NR_putpmsg 189 /* some people actually want streams */
+#define __NR_vfork 190
+#define __NR_ugetrlimit 191
+#define __NR_mmap2 192
+#define __NR_truncate64 193
+#define __NR_ftruncate64 194
+#define __NR_stat64 195
+#define __NR_lstat64 196
+#define __NR_fstat64 197
+#define __NR_chown32 198
+#define __NR_getuid32 199
+#define __NR_getgid32 200
+#define __NR_geteuid32 201
+#define __NR_getegid32 202
+#define __NR_setreuid32 203
+#define __NR_setregid32 204
+#define __NR_getgroups32 205
+#define __NR_setgroups32 206
+#define __NR_fchown32 207
+#define __NR_setresuid32 208
+#define __NR_getresuid32 209
+#define __NR_setresgid32 210
+#define __NR_getresgid32 211
+#define __NR_lchown32 212
+#define __NR_setuid32 213
+#define __NR_setgid32 214
+#define __NR_setfsuid32 215
+#define __NR_setfsgid32 216
+#define __NR_pivot_root 217
+#define __NR_getdents64 220
+#define __NR_gettid 221
+#define __NR_tkill 222
+#define __NR_setxattr 223
+#define __NR_lsetxattr 224
+#define __NR_fsetxattr 225
+#define __NR_getxattr 226
+#define __NR_lgetxattr 227
+#define __NR_fgetxattr 228
+#define __NR_listxattr 229
+#define __NR_llistxattr 230
+#define __NR_flistxattr 231
+#define __NR_removexattr 232
+#define __NR_lremovexattr 233
+#define __NR_fremovexattr 234
+#define __NR_futex 235
+#define __NR_sendfile64 236
+#define __NR_mincore 237
+#define __NR_madvise 238
+#define __NR_fcntl64 239
+#define __NR_readahead 240
+#define __NR_io_setup 241
+#define __NR_io_destroy 242
+#define __NR_io_getevents 243
+#define __NR_io_submit 244
+#define __NR_io_cancel 245
+#define __NR_fadvise64 246
+#define __NR_exit_group 247
+#define __NR_lookup_dcookie 248
+#define __NR_epoll_create 249
+#define __NR_epoll_ctl 250
+#define __NR_epoll_wait 251
+#define __NR_remap_file_pages 252
+#define __NR_set_tid_address 253
+#define __NR_timer_create 254
+#define __NR_timer_settime 255
+#define __NR_timer_gettime 256
+#define __NR_timer_getoverrun 257
+#define __NR_timer_delete 258
+#define __NR_clock_settime 259
+#define __NR_clock_gettime 260
+#define __NR_clock_getres 261
+#define __NR_clock_nanosleep 262
+#define __NR_statfs64 263
+#define __NR_fstatfs64 264
+#define __NR_tgkill 265
+#define __NR_utimes 266
+#define __NR_fadvise64_64 267
+#define __NR_mbind 268
+#define __NR_get_mempolicy 269
+#define __NR_set_mempolicy 270
+#define __NR_mq_open 271
+#define __NR_mq_unlink 272
+#define __NR_mq_timedsend 273
+#define __NR_mq_timedreceive 274
+#define __NR_mq_notify 275
+#define __NR_mq_getsetattr 276
+#define __NR_waitid 277
+#define __NR_vserver 278
+#define __NR_add_key 279
+#define __NR_request_key 280
+#define __NR_keyctl 281
+#define __NR_ioprio_set 282
+#define __NR_ioprio_get 283
+#define __NR_inotify_init 284
+#define __NR_inotify_add_watch 285
+#define __NR_inotify_rm_watch 286
+#define __NR_migrate_pages 287
+#define __NR_openat 288
+#define __NR_mkdirat 289
+#define __NR_mknodat 290
+#define __NR_fchownat 291
+#define __NR_futimesat 292
+#define __NR_fstatat64 293
+#define __NR_unlinkat 294
+#define __NR_renameat 295
+#define __NR_linkat 296
+#define __NR_symlinkat 297
+#define __NR_readlinkat 298
+#define __NR_fchmodat 299
+#define __NR_faccessat 300
+#define __NR_pselect6 301
+#define __NR_ppoll 302
+#define __NR_unshare 303
+#define __NR_set_robust_list 304
+#define __NR_get_robust_list 305
+#define __NR_splice 306
+#define __NR_sync_file_range 307
+#define __NR_tee 308
+#define __NR_vmsplice 309
+#define __NR_move_pages 310
+#define __NR_sched_setaffinity 311
+#define __NR_sched_getaffinity 312
+#define __NR_kexec_load 313
+#define __NR_getcpu 314
+#define __NR_epoll_pwait 315
+#define __NR_utimensat 316
+#define __NR_signalfd 317
+#define __NR_timerfd_create 318
+#define __NR_eventfd 319
+#define __NR_fallocate 320
+#define __NR_timerfd_settime 321
+#define __NR_timerfd_gettime 322
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 323
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_M68K_UNISTD_H_ */
--- /dev/null
+#include <asm-m68k/user.h>
+++ /dev/null
-include include/asm-generic/Kbuild.asm
+++ /dev/null
-
-/* include/asm-m68knommu/MC68328.h: '328 control registers
- *
- * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
- * Bear & Hare Software, Inc.
- *
- * Based on include/asm-m68knommu/MC68332.h
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
- *
- */
-
-#ifndef _MC68328_H_
-#define _MC68328_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-#define LONG_REF(addr) (*((volatile unsigned long*)addr))
-
-#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
-#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
-
-/**********
- *
- * 0xFFFFF0xx -- System Control
- *
- **********/
-
-/*
- * System Control Register (SCR)
- */
-#define SCR_ADDR 0xfffff000
-#define SCR BYTE_REF(SCR_ADDR)
-
-#define SCR_WDTH8 0x01 /* 8-Bit Width Select */
-#define SCR_DMAP 0x04 /* Double Map */
-#define SCR_SO 0x08 /* Supervisor Only */
-#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */
-#define SCR_PRV 0x20 /* Privilege Violation */
-#define SCR_WPV 0x40 /* Write Protect Violation */
-#define SCR_BETO 0x80 /* Bus-Error TimeOut */
-
-/*
- * Mask Revision Register
- */
-#define MRR_ADDR 0xfffff004
-#define MRR LONG_REF(MRR_ADDR)
-
-/**********
- *
- * 0xFFFFF1xx -- Chip-Select logic
- *
- **********/
-
-/**********
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
-
-/*
- * Group Base Address Registers
- */
-#define GRPBASEA_ADDR 0xfffff100
-#define GRPBASEB_ADDR 0xfffff102
-#define GRPBASEC_ADDR 0xfffff104
-#define GRPBASED_ADDR 0xfffff106
-
-#define GRPBASEA WORD_REF(GRPBASEA_ADDR)
-#define GRPBASEB WORD_REF(GRPBASEB_ADDR)
-#define GRPBASEC WORD_REF(GRPBASEC_ADDR)
-#define GRPBASED WORD_REF(GRPBASED_ADDR)
-
-#define GRPBASE_V 0x0001 /* Valid */
-#define GRPBASE_GBA_MASK 0xfff0 /* Group Base Address (bits 31-20) */
-
-/*
- * Group Base Address Mask Registers
- */
-#define GRPMASKA_ADDR 0xfffff108
-#define GRPMASKB_ADDR 0xfffff10a
-#define GRPMASKC_ADDR 0xfffff10c
-#define GRPMASKD_ADDR 0xfffff10e
-
-#define GRPMASKA WORD_REF(GRPMASKA_ADDR)
-#define GRPMASKB WORD_REF(GRPMASKB_ADDR)
-#define GRPMASKC WORD_REF(GRPMASKC_ADDR)
-#define GRPMASKD WORD_REF(GRPMASKD_ADDR)
-
-#define GRMMASK_GMA_MASK 0xfffff0 /* Group Base Mask (bits 31-20) */
-
-/*
- * Chip-Select Option Registers (group A)
- */
-#define CSA0_ADDR 0xfffff110
-#define CSA1_ADDR 0xfffff114
-#define CSA2_ADDR 0xfffff118
-#define CSA3_ADDR 0xfffff11c
-
-#define CSA0 LONG_REF(CSA0_ADDR)
-#define CSA1 LONG_REF(CSA1_ADDR)
-#define CSA2 LONG_REF(CSA2_ADDR)
-#define CSA3 LONG_REF(CSA3_ADDR)
-
-#define CSA_WAIT_MASK 0x00000007 /* Wait State Selection */
-#define CSA_WAIT_SHIFT 0
-#define CSA_RO 0x00000008 /* Read-Only */
-#define CSA_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */
-#define CSA_AM_SHIFT 8
-#define CSA_BUSW 0x00010000 /* Bus Width Select */
-#define CSA_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */
-#define CSA_AC_SHIFT 24
-
-/*
- * Chip-Select Option Registers (group B)
- */
-#define CSB0_ADDR 0xfffff120
-#define CSB1_ADDR 0xfffff124
-#define CSB2_ADDR 0xfffff128
-#define CSB3_ADDR 0xfffff12c
-
-#define CSB0 LONG_REF(CSB0_ADDR)
-#define CSB1 LONG_REF(CSB1_ADDR)
-#define CSB2 LONG_REF(CSB2_ADDR)
-#define CSB3 LONG_REF(CSB3_ADDR)
-
-#define CSB_WAIT_MASK 0x00000007 /* Wait State Selection */
-#define CSB_WAIT_SHIFT 0
-#define CSB_RO 0x00000008 /* Read-Only */
-#define CSB_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */
-#define CSB_AM_SHIFT 8
-#define CSB_BUSW 0x00010000 /* Bus Width Select */
-#define CSB_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */
-#define CSB_AC_SHIFT 24
-
-/*
- * Chip-Select Option Registers (group C)
- */
-#define CSC0_ADDR 0xfffff130
-#define CSC1_ADDR 0xfffff134
-#define CSC2_ADDR 0xfffff138
-#define CSC3_ADDR 0xfffff13c
-
-#define CSC0 LONG_REF(CSC0_ADDR)
-#define CSC1 LONG_REF(CSC1_ADDR)
-#define CSC2 LONG_REF(CSC2_ADDR)
-#define CSC3 LONG_REF(CSC3_ADDR)
-
-#define CSC_WAIT_MASK 0x00000007 /* Wait State Selection */
-#define CSC_WAIT_SHIFT 0
-#define CSC_RO 0x00000008 /* Read-Only */
-#define CSC_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */
-#define CSC_AM_SHIFT 4
-#define CSC_BUSW 0x00010000 /* Bus Width Select */
-#define CSC_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */
-#define CSC_AC_SHIFT 20
-
-/*
- * Chip-Select Option Registers (group D)
- */
-#define CSD0_ADDR 0xfffff140
-#define CSD1_ADDR 0xfffff144
-#define CSD2_ADDR 0xfffff148
-#define CSD3_ADDR 0xfffff14c
-
-#define CSD0 LONG_REF(CSD0_ADDR)
-#define CSD1 LONG_REF(CSD1_ADDR)
-#define CSD2 LONG_REF(CSD2_ADDR)
-#define CSD3 LONG_REF(CSD3_ADDR)
-
-#define CSD_WAIT_MASK 0x00000007 /* Wait State Selection */
-#define CSD_WAIT_SHIFT 0
-#define CSD_RO 0x00000008 /* Read-Only */
-#define CSD_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */
-#define CSD_AM_SHIFT 4
-#define CSD_BUSW 0x00010000 /* Bus Width Select */
-#define CSD_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */
-#define CSD_AC_SHIFT 20
-
-/**********
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
-
-/*
- * PLL Control Register
- */
-#define PLLCR_ADDR 0xfffff200
-#define PLLCR WORD_REF(PLLCR_ADDR)
-
-#define PLLCR_DISPLL 0x0008 /* Disable PLL */
-#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */
-#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */
-#define PLLCR_SYSCLK_SEL_SHIFT 8
-#define PLLCR_PIXCLK_SEL_MASK 0x3800 /* LCD Clock Selection */
-#define PLLCR_PIXCLK_SEL_SHIFT 11
-
-/* 'EZ328-compatible definitions */
-#define PLLCR_LCDCLK_SEL_MASK PLLCR_PIXCLK_SEL_MASK
-#define PLLCR_LCDCLK_SEL_SHIFT PLLCR_PIXCLK_SEL_SHIFT
-
-/*
- * PLL Frequency Select Register
- */
-#define PLLFSR_ADDR 0xfffff202
-#define PLLFSR WORD_REF(PLLFSR_ADDR)
-
-#define PLLFSR_PC_MASK 0x00ff /* P Count */
-#define PLLFSR_PC_SHIFT 0
-#define PLLFSR_QC_MASK 0x0f00 /* Q Count */
-#define PLLFSR_QC_SHIFT 8
-#define PLLFSR_PROT 0x4000 /* Protect P & Q */
-#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */
-
-/*
- * Power Control Register
- */
-#define PCTRL_ADDR 0xfffff207
-#define PCTRL BYTE_REF(PCTRL_ADDR)
-
-#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */
-#define PCTRL_WIDTH_SHIFT 0
-#define PCTRL_STOP 0x40 /* Enter power-save mode immediately */
-#define PCTRL_PCEN 0x80 /* Power Control Enable */
-
-/**********
- *
- * 0xFFFFF3xx -- Interrupt Controller
- *
- **********/
-
-/*
- * Interrupt Vector Register
- */
-#define IVR_ADDR 0xfffff300
-#define IVR BYTE_REF(IVR_ADDR)
-
-#define IVR_VECTOR_MASK 0xF8
-
-/*
- * Interrupt control Register
- */
-#define ICR_ADRR 0xfffff302
-#define ICR WORD_REF(ICR_ADDR)
-
-#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */
-#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */
-#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */
-#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */
-#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */
-#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */
-#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */
-#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */
-
-/*
- * Interrupt Mask Register
- */
-#define IMR_ADDR 0xfffff304
-#define IMR LONG_REF(IMR_ADDR)
-
-/*
- * Define the names for bit positions first. This is useful for
- * request_irq
- */
-#define SPIM_IRQ_NUM 0 /* SPI Master interrupt */
-#define TMR2_IRQ_NUM 1 /* Timer 2 interrupt */
-#define UART_IRQ_NUM 2 /* UART interrupt */
-#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */
-#define RTC_IRQ_NUM 4 /* RTC interrupt */
-#define KB_IRQ_NUM 6 /* Keyboard Interrupt */
-#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */
-#define INT0_IRQ_NUM 8 /* External INT0 */
-#define INT1_IRQ_NUM 9 /* External INT1 */
-#define INT2_IRQ_NUM 10 /* External INT2 */
-#define INT3_IRQ_NUM 11 /* External INT3 */
-#define INT4_IRQ_NUM 12 /* External INT4 */
-#define INT5_IRQ_NUM 13 /* External INT5 */
-#define INT6_IRQ_NUM 14 /* External INT6 */
-#define INT7_IRQ_NUM 15 /* External INT7 */
-#define IRQ1_IRQ_NUM 16 /* IRQ1 */
-#define IRQ2_IRQ_NUM 17 /* IRQ2 */
-#define IRQ3_IRQ_NUM 18 /* IRQ3 */
-#define IRQ6_IRQ_NUM 19 /* IRQ6 */
-#define PEN_IRQ_NUM 20 /* Pen Interrupt */
-#define SPIS_IRQ_NUM 21 /* SPI Slave Interrupt */
-#define TMR1_IRQ_NUM 22 /* Timer 1 interrupt */
-#define IRQ7_IRQ_NUM 23 /* IRQ7 */
-
-/* '328-compatible definitions */
-#define SPI_IRQ_NUM SPIM_IRQ_NUM
-#define TMR_IRQ_NUM TMR1_IRQ_NUM
-
-/*
- * Here go the bitmasks themselves
- */
-#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */
-#define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */
-#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
-#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
-#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */
-#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */
-#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */
-#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */
-#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */
-#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */
-#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */
-#define IMR_MINT4 (1 << INT4_IRQ_NUM) /* Mask External INT4 */
-#define IMR_MINT5 (1 << INT5_IRQ_NUM) /* Mask External INT5 */
-#define IMR_MINT6 (1 << INT6_IRQ_NUM) /* Mask External INT6 */
-#define IMR_MINT7 (1 << INT7_IRQ_NUM) /* Mask External INT7 */
-#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */
-#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */
-#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */
-#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */
-#define IMR_MPEN (1 << PEN_IRQ_NUM) /* Mask Pen Interrupt */
-#define IMR_MSPIS (1 << SPIS_IRQ_NUM) /* Mask SPI Slave Interrupt */
-#define IMR_MTMR1 (1 << TMR1_IRQ_NUM) /* Mask Timer 1 interrupt */
-#define IMR_MIRQ7 (1 << IRQ7_IRQ_NUM) /* Mask IRQ7 */
-
-/* 'EZ328-compatible definitions */
-#define IMR_MSPI IMR_MSPIM
-#define IMR_MTMR IMR_MTMR1
-
-/*
- * Interrupt Wake-Up Enable Register
- */
-#define IWR_ADDR 0xfffff308
-#define IWR LONG_REF(IWR_ADDR)
-
-#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
-#define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
-#define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
-#define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
-#define IWR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
-#define IWR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
-#define IWR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */
-#define IWR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
-#define IWR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
-#define IWR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
-#define IWR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
-#define IWR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */
-#define IWR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */
-#define IWR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */
-#define IWR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */
-#define IWR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
-#define IWR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
-#define IWR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
-#define IWR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
-#define IWR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */
-#define IWR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */
-#define IWR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */
-#define IWR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */
-
-/*
- * Interrupt Status Register
- */
-#define ISR_ADDR 0xfffff30c
-#define ISR LONG_REF(ISR_ADDR)
-
-#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
-#define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
-#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
-#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
-#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
-#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
-#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */
-#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
-#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
-#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
-#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
-#define ISR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */
-#define ISR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */
-#define ISR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */
-#define ISR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */
-#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
-#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
-#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
-#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
-#define ISR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */
-#define ISR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */
-#define ISR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */
-#define ISR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */
-
-/* 'EZ328-compatible definitions */
-#define ISR_SPI ISR_SPIM
-#define ISR_TMR ISR_TMR1
-
-/*
- * Interrupt Pending Register
- */
-#define IPR_ADDR 0xfffff310
-#define IPR LONG_REF(IPR_ADDR)
-
-#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
-#define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
-#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
-#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
-#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
-#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
-#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */
-#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
-#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
-#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
-#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
-#define IPR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */
-#define IPR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */
-#define IPR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */
-#define IPR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */
-#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
-#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
-#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
-#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
-#define IPR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */
-#define IPR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */
-#define IPR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */
-#define IPR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */
-
-/* 'EZ328-compatible definitions */
-#define IPR_SPI IPR_SPIM
-#define IPR_TMR IPR_TMR1
-
-/**********
- *
- * 0xFFFFF4xx -- Parallel Ports
- *
- **********/
-
-/*
- * Port A
- */
-#define PADIR_ADDR 0xfffff400 /* Port A direction reg */
-#define PADATA_ADDR 0xfffff401 /* Port A data register */
-#define PASEL_ADDR 0xfffff403 /* Port A Select register */
-
-#define PADIR BYTE_REF(PADIR_ADDR)
-#define PADATA BYTE_REF(PADATA_ADDR)
-#define PASEL BYTE_REF(PASEL_ADDR)
-
-#define PA(x) (1 << (x))
-#define PA_A(x) PA((x) - 16) /* This is specific to PA only! */
-
-#define PA_A16 PA(0) /* Use A16 as PA(0) */
-#define PA_A17 PA(1) /* Use A17 as PA(1) */
-#define PA_A18 PA(2) /* Use A18 as PA(2) */
-#define PA_A19 PA(3) /* Use A19 as PA(3) */
-#define PA_A20 PA(4) /* Use A20 as PA(4) */
-#define PA_A21 PA(5) /* Use A21 as PA(5) */
-#define PA_A22 PA(6) /* Use A22 as PA(6) */
-#define PA_A23 PA(7) /* Use A23 as PA(7) */
-
-/*
- * Port B
- */
-#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */
-#define PBDATA_ADDR 0xfffff409 /* Port B data register */
-#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */
-
-#define PBDIR BYTE_REF(PBDIR_ADDR)
-#define PBDATA BYTE_REF(PBDATA_ADDR)
-#define PBSEL BYTE_REF(PBSEL_ADDR)
-
-#define PB(x) (1 << (x))
-#define PB_D(x) PB(x) /* This is specific to port B only */
-
-#define PB_D0 PB(0) /* Use D0 as PB(0) */
-#define PB_D1 PB(1) /* Use D1 as PB(1) */
-#define PB_D2 PB(2) /* Use D2 as PB(2) */
-#define PB_D3 PB(3) /* Use D3 as PB(3) */
-#define PB_D4 PB(4) /* Use D4 as PB(4) */
-#define PB_D5 PB(5) /* Use D5 as PB(5) */
-#define PB_D6 PB(6) /* Use D6 as PB(6) */
-#define PB_D7 PB(7) /* Use D7 as PB(7) */
-
-/*
- * Port C
- */
-#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */
-#define PCDATA_ADDR 0xfffff411 /* Port C data register */
-#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */
-
-#define PCDIR BYTE_REF(PCDIR_ADDR)
-#define PCDATA BYTE_REF(PCDATA_ADDR)
-#define PCSEL BYTE_REF(PCSEL_ADDR)
-
-#define PC(x) (1 << (x))
-
-#define PC_WE PC(6) /* Use WE as PC(6) */
-#define PC_DTACK PC(5) /* Use DTACK as PC(5) */
-#define PC_IRQ7 PC(4) /* Use IRQ7 as PC(4) */
-#define PC_LDS PC(2) /* Use LDS as PC(2) */
-#define PC_UDS PC(1) /* Use UDS as PC(1) */
-#define PC_MOCLK PC(0) /* Use MOCLK as PC(0) */
-
-/*
- * Port D
- */
-#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */
-#define PDDATA_ADDR 0xfffff419 /* Port D data register */
-#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */
-#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */
-#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */
-#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */
-
-#define PDDIR BYTE_REF(PDDIR_ADDR)
-#define PDDATA BYTE_REF(PDDATA_ADDR)
-#define PDPUEN BYTE_REF(PDPUEN_ADDR)
-#define PDPOL BYTE_REF(PDPOL_ADDR)
-#define PDIRQEN BYTE_REF(PDIRQEN_ADDR)
-#define PDIQEG BYTE_REF(PDIQEG_ADDR)
-
-#define PD(x) (1 << (x))
-#define PD_KB(x) PD(x) /* This is specific for Port D only */
-
-#define PD_KB0 PD(0) /* Use KB0 as PD(0) */
-#define PD_KB1 PD(1) /* Use KB1 as PD(1) */
-#define PD_KB2 PD(2) /* Use KB2 as PD(2) */
-#define PD_KB3 PD(3) /* Use KB3 as PD(3) */
-#define PD_KB4 PD(4) /* Use KB4 as PD(4) */
-#define PD_KB5 PD(5) /* Use KB5 as PD(5) */
-#define PD_KB6 PD(6) /* Use KB6 as PD(6) */
-#define PD_KB7 PD(7) /* Use KB7 as PD(7) */
-
-/*
- * Port E
- */
-#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */
-#define PEDATA_ADDR 0xfffff421 /* Port E data register */
-#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */
-#define PESEL_ADDR 0xfffff423 /* Port E Select Register */
-
-#define PEDIR BYTE_REF(PEDIR_ADDR)
-#define PEDATA BYTE_REF(PEDATA_ADDR)
-#define PEPUEN BYTE_REF(PEPUEN_ADDR)
-#define PESEL BYTE_REF(PESEL_ADDR)
-
-#define PE(x) (1 << (x))
-
-#define PE_CSA1 PE(1) /* Use CSA1 as PE(1) */
-#define PE_CSA2 PE(2) /* Use CSA2 as PE(2) */
-#define PE_CSA3 PE(3) /* Use CSA3 as PE(3) */
-#define PE_CSB0 PE(4) /* Use CSB0 as PE(4) */
-#define PE_CSB1 PE(5) /* Use CSB1 as PE(5) */
-#define PE_CSB2 PE(6) /* Use CSB2 as PE(6) */
-#define PE_CSB3 PE(7) /* Use CSB3 as PE(7) */
-
-/*
- * Port F
- */
-#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */
-#define PFDATA_ADDR 0xfffff429 /* Port F data register */
-#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */
-#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */
-
-#define PFDIR BYTE_REF(PFDIR_ADDR)
-#define PFDATA BYTE_REF(PFDATA_ADDR)
-#define PFPUEN BYTE_REF(PFPUEN_ADDR)
-#define PFSEL BYTE_REF(PFSEL_ADDR)
-
-#define PF(x) (1 << (x))
-#define PF_A(x) PF((x) - 24) /* This is Port F specific only */
-
-#define PF_A24 PF(0) /* Use A24 as PF(0) */
-#define PF_A25 PF(1) /* Use A25 as PF(1) */
-#define PF_A26 PF(2) /* Use A26 as PF(2) */
-#define PF_A27 PF(3) /* Use A27 as PF(3) */
-#define PF_A28 PF(4) /* Use A28 as PF(4) */
-#define PF_A29 PF(5) /* Use A29 as PF(5) */
-#define PF_A30 PF(6) /* Use A30 as PF(6) */
-#define PF_A31 PF(7) /* Use A31 as PF(7) */
-
-/*
- * Port G
- */
-#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */
-#define PGDATA_ADDR 0xfffff431 /* Port G data register */
-#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */
-#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */
-
-#define PGDIR BYTE_REF(PGDIR_ADDR)
-#define PGDATA BYTE_REF(PGDATA_ADDR)
-#define PGPUEN BYTE_REF(PGPUEN_ADDR)
-#define PGSEL BYTE_REF(PGSEL_ADDR)
-
-#define PG(x) (1 << (x))
-
-#define PG_UART_TXD PG(0) /* Use UART_TXD as PG(0) */
-#define PG_UART_RXD PG(1) /* Use UART_RXD as PG(1) */
-#define PG_PWMOUT PG(2) /* Use PWMOUT as PG(2) */
-#define PG_TOUT2 PG(3) /* Use TOUT2 as PG(3) */
-#define PG_TIN2 PG(4) /* Use TIN2 as PG(4) */
-#define PG_TOUT1 PG(5) /* Use TOUT1 as PG(5) */
-#define PG_TIN1 PG(6) /* Use TIN1 as PG(6) */
-#define PG_RTCOUT PG(7) /* Use RTCOUT as PG(7) */
-
-/*
- * Port J
- */
-#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */
-#define PJDATA_ADDR 0xfffff439 /* Port J data register */
-#define PJSEL_ADDR 0xfffff43b /* Port J Select Register */
-
-#define PJDIR BYTE_REF(PJDIR_ADDR)
-#define PJDATA BYTE_REF(PJDATA_ADDR)
-#define PJSEL BYTE_REF(PJSEL_ADDR)
-
-#define PJ(x) (1 << (x))
-
-#define PJ_CSD3 PJ(7) /* Use CSD3 as PJ(7) */
-
-/*
- * Port K
- */
-#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */
-#define PKDATA_ADDR 0xfffff441 /* Port K data register */
-#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enable reg */
-#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */
-
-#define PKDIR BYTE_REF(PKDIR_ADDR)
-#define PKDATA BYTE_REF(PKDATA_ADDR)
-#define PKPUEN BYTE_REF(PKPUEN_ADDR)
-#define PKSEL BYTE_REF(PKSEL_ADDR)
-
-#define PK(x) (1 << (x))
-
-/*
- * Port M
- */
-#define PMDIR_ADDR 0xfffff438 /* Port M direction reg */
-#define PMDATA_ADDR 0xfffff439 /* Port M data register */
-#define PMPUEN_ADDR 0xfffff43a /* Port M Pull-Up enable reg */
-#define PMSEL_ADDR 0xfffff43b /* Port M Select Register */
-
-#define PMDIR BYTE_REF(PMDIR_ADDR)
-#define PMDATA BYTE_REF(PMDATA_ADDR)
-#define PMPUEN BYTE_REF(PMPUEN_ADDR)
-#define PMSEL BYTE_REF(PMSEL_ADDR)
-
-#define PM(x) (1 << (x))
-
-/**********
- *
- * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
- *
- **********/
-
-/*
- * PWM Control Register
- */
-#define PWMC_ADDR 0xfffff500
-#define PWMC WORD_REF(PWMC_ADDR)
-
-#define PWMC_CLKSEL_MASK 0x0007 /* Clock Selection */
-#define PWMC_CLKSEL_SHIFT 0
-#define PWMC_PWMEN 0x0010 /* Enable PWM */
-#define PMNC_POL 0x0020 /* PWM Output Bit Polarity */
-#define PWMC_PIN 0x0080 /* Current PWM output pin status */
-#define PWMC_LOAD 0x0100 /* Force a new period */
-#define PWMC_IRQEN 0x4000 /* Interrupt Request Enable */
-#define PWMC_CLKSRC 0x8000 /* Clock Source Select */
-
-/* 'EZ328-compatible definitions */
-#define PWMC_EN PWMC_PWMEN
-
-/*
- * PWM Period Register
- */
-#define PWMP_ADDR 0xfffff502
-#define PWMP WORD_REF(PWMP_ADDR)
-
-/*
- * PWM Width Register
- */
-#define PWMW_ADDR 0xfffff504
-#define PWMW WORD_REF(PWMW_ADDR)
-
-/*
- * PWM Counter Register
- */
-#define PWMCNT_ADDR 0xfffff506
-#define PWMCNT WORD_REF(PWMCNT_ADDR)
-
-/**********
- *
- * 0xFFFFF6xx -- General-Purpose Timers
- *
- **********/
-
-/*
- * Timer Unit 1 and 2 Control Registers
- */
-#define TCTL1_ADDR 0xfffff600
-#define TCTL1 WORD_REF(TCTL1_ADDR)
-#define TCTL2_ADDR 0xfffff60c
-#define TCTL2 WORD_REF(TCTL2_ADDR)
-
-#define TCTL_TEN 0x0001 /* Timer Enable */
-#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */
-#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */
-#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */
-#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */
-#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */
-#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */
-#define TCTL_IRQEN 0x0010 /* IRQ Enable */
-#define TCTL_OM 0x0020 /* Output Mode */
-#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */
-#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */
-#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */
-#define TCTL_FRR 0x0010 /* Free-Run Mode */
-
-/* 'EZ328-compatible definitions */
-#define TCTL_ADDR TCTL1_ADDR
-#define TCTL TCTL1
-
-/*
- * Timer Unit 1 and 2 Prescaler Registers
- */
-#define TPRER1_ADDR 0xfffff602
-#define TPRER1 WORD_REF(TPRER1_ADDR)
-#define TPRER2_ADDR 0xfffff60e
-#define TPRER2 WORD_REF(TPRER2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TPRER_ADDR TPRER1_ADDR
-#define TPRER TPRER1
-
-/*
- * Timer Unit 1 and 2 Compare Registers
- */
-#define TCMP1_ADDR 0xfffff604
-#define TCMP1 WORD_REF(TCMP1_ADDR)
-#define TCMP2_ADDR 0xfffff610
-#define TCMP2 WORD_REF(TCMP2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TCMP_ADDR TCMP1_ADDR
-#define TCMP TCMP1
-
-/*
- * Timer Unit 1 and 2 Capture Registers
- */
-#define TCR1_ADDR 0xfffff606
-#define TCR1 WORD_REF(TCR1_ADDR)
-#define TCR2_ADDR 0xfffff612
-#define TCR2 WORD_REF(TCR2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TCR_ADDR TCR1_ADDR
-#define TCR TCR1
-
-/*
- * Timer Unit 1 and 2 Counter Registers
- */
-#define TCN1_ADDR 0xfffff608
-#define TCN1 WORD_REF(TCN1_ADDR)
-#define TCN2_ADDR 0xfffff614
-#define TCN2 WORD_REF(TCN2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TCN_ADDR TCN1_ADDR
-#define TCN TCN
-
-/*
- * Timer Unit 1 and 2 Status Registers
- */
-#define TSTAT1_ADDR 0xfffff60a
-#define TSTAT1 WORD_REF(TSTAT1_ADDR)
-#define TSTAT2_ADDR 0xfffff616
-#define TSTAT2 WORD_REF(TSTAT2_ADDR)
-
-#define TSTAT_COMP 0x0001 /* Compare Event occurred */
-#define TSTAT_CAPT 0x0001 /* Capture Event occurred */
-
-/* 'EZ328-compatible definitions */
-#define TSTAT_ADDR TSTAT1_ADDR
-#define TSTAT TSTAT1
-
-/*
- * Watchdog Compare Register
- */
-#define WRR_ADDR 0xfffff61a
-#define WRR WORD_REF(WRR_ADDR)
-
-/*
- * Watchdog Counter Register
- */
-#define WCN_ADDR 0xfffff61c
-#define WCN WORD_REF(WCN_ADDR)
-
-/*
- * Watchdog Control and Status Register
- */
-#define WCSR_ADDR 0xfffff618
-#define WCSR WORD_REF(WCSR_ADDR)
-
-#define WCSR_WDEN 0x0001 /* Watchdog Enable */
-#define WCSR_FI 0x0002 /* Forced Interrupt (instead of SW reset)*/
-#define WCSR_WRST 0x0004 /* Watchdog Reset */
-
-/**********
- *
- * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS)
- *
- **********/
-
-/*
- * SPI Slave Register
- */
-#define SPISR_ADDR 0xfffff700
-#define SPISR WORD_REF(SPISR_ADDR)
-
-#define SPISR_DATA_ADDR 0xfffff701
-#define SPISR_DATA BYTE_REF(SPISR_DATA_ADDR)
-
-#define SPISR_DATA_MASK 0x00ff /* Shifted data from the external device */
-#define SPISR_DATA_SHIFT 0
-#define SPISR_SPISEN 0x0100 /* SPIS module enable */
-#define SPISR_POL 0x0200 /* SPSCLK polarity control */
-#define SPISR_PHA 0x0400 /* Phase relationship between SPSCLK & SPSRxD */
-#define SPISR_OVWR 0x0800 /* Data buffer has been overwritten */
-#define SPISR_DATARDY 0x1000 /* Data ready */
-#define SPISR_ENPOL 0x2000 /* Enable Polarity */
-#define SPISR_IRQEN 0x4000 /* SPIS IRQ Enable */
-#define SPISR_SPISIRQ 0x8000 /* SPIS IRQ posted */
-
-/**********
- *
- * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
- *
- **********/
-
-/*
- * SPIM Data Register
- */
-#define SPIMDATA_ADDR 0xfffff800
-#define SPIMDATA WORD_REF(SPIMDATA_ADDR)
-
-/*
- * SPIM Control/Status Register
- */
-#define SPIMCONT_ADDR 0xfffff802
-#define SPIMCONT WORD_REF(SPIMCONT_ADDR)
-
-#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */
-#define SPIMCONT_BIT_COUNT_SHIFT 0
-#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */
-#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */
-#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */
-#define SPIMCONT_SPIMIRQ 0x0080 /* Interrupt Request */
-#define SPIMCONT_XCH 0x0100 /* Exchange */
-#define SPIMCONT_RSPIMEN 0x0200 /* Enable SPIM */
-#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */
-#define SPIMCONT_DATA_RATE_SHIFT 13
-
-/* 'EZ328-compatible definitions */
-#define SPIMCONT_IRQ SPIMCONT_SPIMIRQ
-#define SPIMCONT_ENABLE SPIMCONT_SPIMEN
-/**********
- *
- * 0xFFFFF9xx -- UART
- *
- **********/
-
-/*
- * UART Status/Control Register
- */
-#define USTCNT_ADDR 0xfffff900
-#define USTCNT WORD_REF(USTCNT_ADDR)
-
-#define USTCNT_TXAVAILEN 0x0001 /* Transmitter Available Int Enable */
-#define USTCNT_TXHALFEN 0x0002 /* Transmitter Half Empty Int Enable */
-#define USTCNT_TXEMPTYEN 0x0004 /* Transmitter Empty Int Enable */
-#define USTCNT_RXREADYEN 0x0008 /* Receiver Ready Interrupt Enable */
-#define USTCNT_RXHALFEN 0x0010 /* Receiver Half-Full Int Enable */
-#define USTCNT_RXFULLEN 0x0020 /* Receiver Full Interrupt Enable */
-#define USTCNT_CTSDELTAEN 0x0040 /* CTS Delta Interrupt Enable */
-#define USTCNT_GPIODELTAEN 0x0080 /* Old Data Interrupt Enable */
-#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */
-#define USTCNT_STOP 0x0200 /* Stop bit transmission */
-#define USTCNT_ODD_EVEN 0x0400 /* Odd Parity */
-#define USTCNT_PARITYEN 0x0800 /* Parity Enable */
-#define USTCNT_CLKMODE 0x1000 /* Clock Mode Select */
-#define USTCNT_TXEN 0x2000 /* Transmitter Enable */
-#define USTCNT_RXEN 0x4000 /* Receiver Enable */
-#define USTCNT_UARTEN 0x8000 /* UART Enable */
-
-/* 'EZ328-compatible definitions */
-#define USTCNT_TXAE USTCNT_TXAVAILEN
-#define USTCNT_TXHE USTCNT_TXHALFEN
-#define USTCNT_TXEE USTCNT_TXEMPTYEN
-#define USTCNT_RXRE USTCNT_RXREADYEN
-#define USTCNT_RXHE USTCNT_RXHALFEN
-#define USTCNT_RXFE USTCNT_RXFULLEN
-#define USTCNT_CTSD USTCNT_CTSDELTAEN
-#define USTCNT_ODD USTCNT_ODD_EVEN
-#define USTCNT_PEN USTCNT_PARITYEN
-#define USTCNT_CLKM USTCNT_CLKMODE
-#define USTCNT_UEN USTCNT_UARTEN
-
-/*
- * UART Baud Control Register
- */
-#define UBAUD_ADDR 0xfffff902
-#define UBAUD WORD_REF(UBAUD_ADDR)
-
-#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
-#define UBAUD_PRESCALER_SHIFT 0
-#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
-#define UBAUD_DIVIDE_SHIFT 8
-#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
-#define UBAUD_GPIOSRC 0x1000 /* GPIO source */
-#define UBAUD_GPIODIR 0x2000 /* GPIO Direction */
-#define UBAUD_GPIO 0x4000 /* Current GPIO pin status */
-#define UBAUD_GPIODELTA 0x8000 /* GPIO pin value changed */
-
-/*
- * UART Receiver Register
- */
-#define URX_ADDR 0xfffff904
-#define URX WORD_REF(URX_ADDR)
-
-#define URX_RXDATA_ADDR 0xfffff905
-#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR)
-
-#define URX_RXDATA_MASK 0x00ff /* Received data */
-#define URX_RXDATA_SHIFT 0
-#define URX_PARITY_ERROR 0x0100 /* Parity Error */
-#define URX_BREAK 0x0200 /* Break Detected */
-#define URX_FRAME_ERROR 0x0400 /* Framing Error */
-#define URX_OVRUN 0x0800 /* Serial Overrun */
-#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */
-#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */
-#define URX_FIFO_FULL 0x8000 /* FIFO is Full */
-
-/*
- * UART Transmitter Register
- */
-#define UTX_ADDR 0xfffff906
-#define UTX WORD_REF(UTX_ADDR)
-
-#define UTX_TXDATA_ADDR 0xfffff907
-#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR)
-
-#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */
-#define UTX_TXDATA_SHIFT 0
-#define UTX_CTS_DELTA 0x0100 /* CTS changed */
-#define UTX_CTS_STATUS 0x0200 /* CTS State */
-#define UTX_IGNORE_CTS 0x0800 /* Ignore CTS */
-#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */
-#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */
-#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */
-#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */
-
-/* 'EZ328-compatible definitions */
-#define UTX_CTS_STAT UTX_CTS_STATUS
-#define UTX_NOCTS UTX_IGNORE_CTS
-
-/*
- * UART Miscellaneous Register
- */
-#define UMISC_ADDR 0xfffff908
-#define UMISC WORD_REF(UMISC_ADDR)
-
-#define UMISC_TX_POL 0x0004 /* Transmit Polarity */
-#define UMISC_RX_POL 0x0008 /* Receive Polarity */
-#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */
-#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */
-#define UMISC_RTS 0x0040 /* Set RTS status */
-#define UMISC_RTSCONT 0x0080 /* Choose RTS control */
-#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */
-#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */
-#define UMISC_CLKSRC 0x4000 /* Clock Source */
-
-
-/* generalization of uart control registers to support multiple ports: */
-typedef volatile struct {
- volatile unsigned short int ustcnt;
- volatile unsigned short int ubaud;
- union {
- volatile unsigned short int w;
- struct {
- volatile unsigned char status;
- volatile unsigned char rxdata;
- } b;
- } urx;
- union {
- volatile unsigned short int w;
- struct {
- volatile unsigned char status;
- volatile unsigned char txdata;
- } b;
- } utx;
- volatile unsigned short int umisc;
- volatile unsigned short int pad1;
- volatile unsigned short int pad2;
- volatile unsigned short int pad3;
-} __attribute__((packed)) m68328_uart;
-
-
-/**********
- *
- * 0xFFFFFAxx -- LCD Controller
- *
- **********/
-
-/*
- * LCD Screen Starting Address Register
- */
-#define LSSA_ADDR 0xfffffa00
-#define LSSA LONG_REF(LSSA_ADDR)
-
-#define LSSA_SSA_MASK 0xfffffffe /* Bit 0 is reserved */
-
-/*
- * LCD Virtual Page Width Register
- */
-#define LVPW_ADDR 0xfffffa05
-#define LVPW BYTE_REF(LVPW_ADDR)
-
-/*
- * LCD Screen Width Register (not compatible with 'EZ328 !!!)
- */
-#define LXMAX_ADDR 0xfffffa08
-#define LXMAX WORD_REF(LXMAX_ADDR)
-
-#define LXMAX_XM_MASK 0x02ff /* Bits 0-3 are reserved */
-
-/*
- * LCD Screen Height Register
- */
-#define LYMAX_ADDR 0xfffffa0a
-#define LYMAX WORD_REF(LYMAX_ADDR)
-
-#define LYMAX_YM_MASK 0x02ff /* Bits 10-15 are reserved */
-
-/*
- * LCD Cursor X Position Register
- */
-#define LCXP_ADDR 0xfffffa18
-#define LCXP WORD_REF(LCXP_ADDR)
-
-#define LCXP_CC_MASK 0xc000 /* Cursor Control */
-#define LCXP_CC_TRAMSPARENT 0x0000
-#define LCXP_CC_BLACK 0x4000
-#define LCXP_CC_REVERSED 0x8000
-#define LCXP_CC_WHITE 0xc000
-#define LCXP_CXP_MASK 0x02ff /* Cursor X position */
-
-/*
- * LCD Cursor Y Position Register
- */
-#define LCYP_ADDR 0xfffffa1a
-#define LCYP WORD_REF(LCYP_ADDR)
-
-#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */
-
-/*
- * LCD Cursor Width and Heigth Register
- */
-#define LCWCH_ADDR 0xfffffa1c
-#define LCWCH WORD_REF(LCWCH_ADDR)
-
-#define LCWCH_CH_MASK 0x001f /* Cursor Height */
-#define LCWCH_CH_SHIFT 0
-#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */
-#define LCWCH_CW_SHIFT 8
-
-/*
- * LCD Blink Control Register
- */
-#define LBLKC_ADDR 0xfffffa1f
-#define LBLKC BYTE_REF(LBLKC_ADDR)
-
-#define LBLKC_BD_MASK 0x7f /* Blink Divisor */
-#define LBLKC_BD_SHIFT 0
-#define LBLKC_BKEN 0x80 /* Blink Enabled */
-
-/*
- * LCD Panel Interface Configuration Register
- */
-#define LPICF_ADDR 0xfffffa20
-#define LPICF BYTE_REF(LPICF_ADDR)
-
-#define LPICF_GS_MASK 0x01 /* Gray-Scale Mode */
-#define LPICF_GS_BW 0x00
-#define LPICF_GS_GRAY_4 0x01
-#define LPICF_PBSIZ_MASK 0x06 /* Panel Bus Width */
-#define LPICF_PBSIZ_1 0x00
-#define LPICF_PBSIZ_2 0x02
-#define LPICF_PBSIZ_4 0x04
-
-/*
- * LCD Polarity Configuration Register
- */
-#define LPOLCF_ADDR 0xfffffa21
-#define LPOLCF BYTE_REF(LPOLCF_ADDR)
-
-#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */
-#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */
-#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */
-#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */
-
-/*
- * LACD (LCD Alternate Crystal Direction) Rate Control Register
- */
-#define LACDRC_ADDR 0xfffffa23
-#define LACDRC BYTE_REF(LACDRC_ADDR)
-
-#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */
-#define LACDRC_ACD_SHIFT 0
-
-/*
- * LCD Pixel Clock Divider Register
- */
-#define LPXCD_ADDR 0xfffffa25
-#define LPXCD BYTE_REF(LPXCD_ADDR)
-
-#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */
-#define LPXCD_PCD_SHIFT 0
-
-/*
- * LCD Clocking Control Register
- */
-#define LCKCON_ADDR 0xfffffa27
-#define LCKCON BYTE_REF(LCKCON_ADDR)
-
-#define LCKCON_PCDS 0x01 /* Pixel Clock Divider Source Select */
-#define LCKCON_DWIDTH 0x02 /* Display Memory Width */
-#define LCKCON_DWS_MASK 0x3c /* Display Wait-State */
-#define LCKCON_DWS_SHIFT 2
-#define LCKCON_DMA16 0x40 /* DMA burst length */
-#define LCKCON_LCDON 0x80 /* Enable LCD Controller */
-
-/* 'EZ328-compatible definitions */
-#define LCKCON_DW_MASK LCKCON_DWS_MASK
-#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
-
-/*
- * LCD Last Buffer Address Register
- */
-#define LLBAR_ADDR 0xfffffa29
-#define LLBAR BYTE_REF(LLBAR_ADDR)
-
-#define LLBAR_LBAR_MASK 0x7f /* Number of memory words to fill 1 line */
-#define LLBAR_LBAR_SHIFT 0
-
-/*
- * LCD Octet Terminal Count Register
- */
-#define LOTCR_ADDR 0xfffffa2b
-#define LOTCR BYTE_REF(LOTCR_ADDR)
-
-/*
- * LCD Panning Offset Register
- */
-#define LPOSR_ADDR 0xfffffa2d
-#define LPOSR BYTE_REF(LPOSR_ADDR)
-
-#define LPOSR_BOS 0x08 /* Byte offset (for B/W mode only */
-#define LPOSR_POS_MASK 0x07 /* Pixel Offset Code */
-#define LPOSR_POS_SHIFT 0
-
-/*
- * LCD Frame Rate Control Modulation Register
- */
-#define LFRCM_ADDR 0xfffffa31
-#define LFRCM BYTE_REF(LFRCM_ADDR)
-
-#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */
-#define LFRCM_YMOD_SHIFT 0
-#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */
-#define LFRCM_XMOD_SHIFT 4
-
-/*
- * LCD Gray Palette Mapping Register
- */
-#define LGPMR_ADDR 0xfffffa32
-#define LGPMR WORD_REF(LGPMR_ADDR)
-
-#define LGPMR_GLEVEL3_MASK 0x000f
-#define LGPMR_GLEVEL3_SHIFT 0
-#define LGPMR_GLEVEL2_MASK 0x00f0
-#define LGPMR_GLEVEL2_SHIFT 4
-#define LGPMR_GLEVEL0_MASK 0x0f00
-#define LGPMR_GLEVEL0_SHIFT 8
-#define LGPMR_GLEVEL1_MASK 0xf000
-#define LGPMR_GLEVEL1_SHIFT 12
-
-/**********
- *
- * 0xFFFFFBxx -- Real-Time Clock (RTC)
- *
- **********/
-
-/*
- * RTC Hours Minutes and Seconds Register
- */
-#define RTCTIME_ADDR 0xfffffb00
-#define RTCTIME LONG_REF(RTCTIME_ADDR)
-
-#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */
-#define RTCTIME_SECONDS_SHIFT 0
-#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */
-#define RTCTIME_MINUTES_SHIFT 16
-#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */
-#define RTCTIME_HOURS_SHIFT 24
-
-/*
- * RTC Alarm Register
- */
-#define RTCALRM_ADDR 0xfffffb04
-#define RTCALRM LONG_REF(RTCALRM_ADDR)
-
-#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */
-#define RTCALRM_SECONDS_SHIFT 0
-#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */
-#define RTCALRM_MINUTES_SHIFT 16
-#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */
-#define RTCALRM_HOURS_SHIFT 24
-
-/*
- * RTC Control Register
- */
-#define RTCCTL_ADDR 0xfffffb0c
-#define RTCCTL WORD_REF(RTCCTL_ADDR)
-
-#define RTCCTL_384 0x0020 /* Crystal Selection */
-#define RTCCTL_ENABLE 0x0080 /* RTC Enable */
-
-/* 'EZ328-compatible definitions */
-#define RTCCTL_XTL RTCCTL_384
-#define RTCCTL_EN RTCCTL_ENABLE
-
-/*
- * RTC Interrupt Status Register
- */
-#define RTCISR_ADDR 0xfffffb0e
-#define RTCISR WORD_REF(RTCISR_ADDR)
-
-#define RTCISR_SW 0x0001 /* Stopwatch timed out */
-#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */
-#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */
-#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */
-#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */
-
-/*
- * RTC Interrupt Enable Register
- */
-#define RTCIENR_ADDR 0xfffffb10
-#define RTCIENR WORD_REF(RTCIENR_ADDR)
-
-#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */
-#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */
-#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */
-#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */
-#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */
-
-/*
- * Stopwatch Minutes Register
- */
-#define STPWCH_ADDR 0xfffffb12
-#define STPWCH WORD_REF(STPWCH)
-
-#define STPWCH_CNT_MASK 0x00ff /* Stopwatch countdown value */
-#define SPTWCH_CNT_SHIFT 0
-
-#endif /* _MC68328_H_ */
+++ /dev/null
-
-/* include/asm-m68knommu/MC68332.h: '332 control registers
- *
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
- *
- */
-
-#ifndef _MC68332_H_
-#define _MC68332_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-
-#define PORTE_ADDR 0xfffa11
-#define PORTE BYTE_REF(PORTE_ADDR)
-#define DDRE_ADDR 0xfffa15
-#define DDRE BYTE_REF(DDRE_ADDR)
-#define PEPAR_ADDR 0xfffa17
-#define PEPAR BYTE_REF(PEPAR_ADDR)
-
-#define PORTF_ADDR 0xfffa19
-#define PORTF BYTE_REF(PORTF_ADDR)
-#define DDRF_ADDR 0xfffa1d
-#define DDRF BYTE_REF(DDRF_ADDR)
-#define PFPAR_ADDR 0xfffa1f
-#define PFPAR BYTE_REF(PFPAR_ADDR)
-
-#define PORTQS_ADDR 0xfffc15
-#define PORTQS BYTE_REF(PORTQS_ADDR)
-#define DDRQS_ADDR 0xfffc17
-#define DDRQS BYTE_REF(DDRQS_ADDR)
-#define PQSPAR_ADDR 0xfffc16
-#define PQSPAR BYTE_REF(PQSPAR_ADDR)
-
-#define CSPAR0_ADDR 0xFFFA44
-#define CSPAR0 WORD_REF(CSPAR0_ADDR)
-#define CSPAR1_ADDR 0xFFFA46
-#define CSPAR1 WORD_REF(CSPAR1_ADDR)
-#define CSARBT_ADDR 0xFFFA48
-#define CSARBT WORD_REF(CSARBT_ADDR)
-#define CSOPBT_ADDR 0xFFFA4A
-#define CSOPBT WORD_REF(CSOPBT_ADDR)
-#define CSBAR0_ADDR 0xFFFA4C
-#define CSBAR0 WORD_REF(CSBAR0_ADDR)
-#define CSOR0_ADDR 0xFFFA4E
-#define CSOR0 WORD_REF(CSOR0_ADDR)
-#define CSBAR1_ADDR 0xFFFA50
-#define CSBAR1 WORD_REF(CSBAR1_ADDR)
-#define CSOR1_ADDR 0xFFFA52
-#define CSOR1 WORD_REF(CSOR1_ADDR)
-#define CSBAR2_ADDR 0xFFFA54
-#define CSBAR2 WORD_REF(CSBAR2_ADDR)
-#define CSOR2_ADDR 0xFFFA56
-#define CSOR2 WORD_REF(CSOR2_ADDR)
-#define CSBAR3_ADDR 0xFFFA58
-#define CSBAR3 WORD_REF(CSBAR3_ADDR)
-#define CSOR3_ADDR 0xFFFA5A
-#define CSOR3 WORD_REF(CSOR3_ADDR)
-#define CSBAR4_ADDR 0xFFFA5C
-#define CSBAR4 WORD_REF(CSBAR4_ADDR)
-#define CSOR4_ADDR 0xFFFA5E
-#define CSOR4 WORD_REF(CSOR4_ADDR)
-#define CSBAR5_ADDR 0xFFFA60
-#define CSBAR5 WORD_REF(CSBAR5_ADDR)
-#define CSOR5_ADDR 0xFFFA62
-#define CSOR5 WORD_REF(CSOR5_ADDR)
-#define CSBAR6_ADDR 0xFFFA64
-#define CSBAR6 WORD_REF(CSBAR6_ADDR)
-#define CSOR6_ADDR 0xFFFA66
-#define CSOR6 WORD_REF(CSOR6_ADDR)
-#define CSBAR7_ADDR 0xFFFA68
-#define CSBAR7 WORD_REF(CSBAR7_ADDR)
-#define CSOR7_ADDR 0xFFFA6A
-#define CSOR7 WORD_REF(CSOR7_ADDR)
-#define CSBAR8_ADDR 0xFFFA6C
-#define CSBAR8 WORD_REF(CSBAR8_ADDR)
-#define CSOR8_ADDR 0xFFFA6E
-#define CSOR8 WORD_REF(CSOR8_ADDR)
-#define CSBAR9_ADDR 0xFFFA70
-#define CSBAR9 WORD_REF(CSBAR9_ADDR)
-#define CSOR9_ADDR 0xFFFA72
-#define CSOR9 WORD_REF(CSOR9_ADDR)
-#define CSBAR10_ADDR 0xFFFA74
-#define CSBAR10 WORD_REF(CSBAR10_ADDR)
-#define CSOR10_ADDR 0xFFFA76
-#define CSOR10 WORD_REF(CSOR10_ADDR)
-
-#define CSOR_MODE_ASYNC 0x0000
-#define CSOR_MODE_SYNC 0x8000
-#define CSOR_MODE_MASK 0x8000
-#define CSOR_BYTE_DISABLE 0x0000
-#define CSOR_BYTE_UPPER 0x4000
-#define CSOR_BYTE_LOWER 0x2000
-#define CSOR_BYTE_BOTH 0x6000
-#define CSOR_BYTE_MASK 0x6000
-#define CSOR_RW_RSVD 0x0000
-#define CSOR_RW_READ 0x0800
-#define CSOR_RW_WRITE 0x1000
-#define CSOR_RW_BOTH 0x1800
-#define CSOR_RW_MASK 0x1800
-#define CSOR_STROBE_DS 0x0400
-#define CSOR_STROBE_AS 0x0000
-#define CSOR_STROBE_MASK 0x0400
-#define CSOR_DSACK_WAIT(x) (wait << 6)
-#define CSOR_DSACK_FTERM (14 << 6)
-#define CSOR_DSACK_EXTERNAL (15 << 6)
-#define CSOR_DSACK_MASK 0x03c0
-#define CSOR_SPACE_CPU 0x0000
-#define CSOR_SPACE_USER 0x0010
-#define CSOR_SPACE_SU 0x0020
-#define CSOR_SPACE_BOTH 0x0030
-#define CSOR_SPACE_MASK 0x0030
-#define CSOR_IPL_ALL 0x0000
-#define CSOR_IPL_PRIORITY(x) (x << 1)
-#define CSOR_IPL_MASK 0x000e
-#define CSOR_AVEC_ON 0x0001
-#define CSOR_AVEC_OFF 0x0000
-#define CSOR_AVEC_MASK 0x0001
-
-#define CSBAR_ADDR(x) ((addr >> 11) << 3)
-#define CSBAR_ADDR_MASK 0xfff8
-#define CSBAR_BLKSIZE_2K 0x0000
-#define CSBAR_BLKSIZE_8K 0x0001
-#define CSBAR_BLKSIZE_16K 0x0002
-#define CSBAR_BLKSIZE_64K 0x0003
-#define CSBAR_BLKSIZE_128K 0x0004
-#define CSBAR_BLKSIZE_256K 0x0005
-#define CSBAR_BLKSIZE_512K 0x0006
-#define CSBAR_BLKSIZE_1M 0x0007
-#define CSBAR_BLKSIZE_MASK 0x0007
-
-#define CSPAR_DISC 0
-#define CSPAR_ALT 1
-#define CSPAR_CS8 2
-#define CSPAR_CS16 3
-#define CSPAR_MASK 3
-
-#define CSPAR0_CSBOOT(x) (x << 0)
-#define CSPAR0_CS0(x) (x << 2)
-#define CSPAR0_CS1(x) (x << 4)
-#define CSPAR0_CS2(x) (x << 6)
-#define CSPAR0_CS3(x) (x << 8)
-#define CSPAR0_CS4(x) (x << 10)
-#define CSPAR0_CS5(x) (x << 12)
-
-#define CSPAR1_CS6(x) (x << 0)
-#define CSPAR1_CS7(x) (x << 2)
-#define CSPAR1_CS8(x) (x << 4)
-#define CSPAR1_CS9(x) (x << 6)
-#define CSPAR1_CS10(x) (x << 8)
-
-#endif
+++ /dev/null
-
-/* include/asm-m68knommu/MC68EZ328.h: 'EZ328 control registers
- *
- * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
- * Bear & Hare Software, Inc.
- *
- * Based on include/asm-m68knommu/MC68332.h
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
- * The Silver Hammer Group, Ltd.
- *
- */
-
-#ifndef _MC68EZ328_H_
-#define _MC68EZ328_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-#define LONG_REF(addr) (*((volatile unsigned long*)addr))
-
-#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
-#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
-
-/**********
- *
- * 0xFFFFF0xx -- System Control
- *
- **********/
-
-/*
- * System Control Register (SCR)
- */
-#define SCR_ADDR 0xfffff000
-#define SCR BYTE_REF(SCR_ADDR)
-
-#define SCR_WDTH8 0x01 /* 8-Bit Width Select */
-#define SCR_DMAP 0x04 /* Double Map */
-#define SCR_SO 0x08 /* Supervisor Only */
-#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */
-#define SCR_PRV 0x20 /* Privilege Violation */
-#define SCR_WPV 0x40 /* Write Protect Violation */
-#define SCR_BETO 0x80 /* Bus-Error TimeOut */
-
-/*
- * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
- */
-#define MRR_ADDR 0xfffff004
-#define MRR LONG_REF(MRR_ADDR)
-
-/**********
- *
- * 0xFFFFF1xx -- Chip-Select logic
- *
- **********/
-
-/*
- * Chip Select Group Base Registers
- */
-#define CSGBA_ADDR 0xfffff100
-#define CSGBB_ADDR 0xfffff102
-
-#define CSGBC_ADDR 0xfffff104
-#define CSGBD_ADDR 0xfffff106
-
-#define CSGBA WORD_REF(CSGBA_ADDR)
-#define CSGBB WORD_REF(CSGBB_ADDR)
-#define CSGBC WORD_REF(CSGBC_ADDR)
-#define CSGBD WORD_REF(CSGBD_ADDR)
-
-/*
- * Chip Select Registers
- */
-#define CSA_ADDR 0xfffff110
-#define CSB_ADDR 0xfffff112
-#define CSC_ADDR 0xfffff114
-#define CSD_ADDR 0xfffff116
-
-#define CSA WORD_REF(CSA_ADDR)
-#define CSB WORD_REF(CSB_ADDR)
-#define CSC WORD_REF(CSC_ADDR)
-#define CSD WORD_REF(CSD_ADDR)
-
-#define CSA_EN 0x0001 /* Chip-Select Enable */
-#define CSA_SIZ_MASK 0x000e /* Chip-Select Size */
-#define CSA_SIZ_SHIFT 1
-#define CSA_WS_MASK 0x0070 /* Wait State */
-#define CSA_WS_SHIFT 4
-#define CSA_BSW 0x0080 /* Data Bus Width */
-#define CSA_FLASH 0x0100 /* FLASH Memory Support */
-#define CSA_RO 0x8000 /* Read-Only */
-
-#define CSB_EN 0x0001 /* Chip-Select Enable */
-#define CSB_SIZ_MASK 0x000e /* Chip-Select Size */
-#define CSB_SIZ_SHIFT 1
-#define CSB_WS_MASK 0x0070 /* Wait State */
-#define CSB_WS_SHIFT 4
-#define CSB_BSW 0x0080 /* Data Bus Width */
-#define CSB_FLASH 0x0100 /* FLASH Memory Support */
-#define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
-#define CSB_UPSIZ_SHIFT 11
-#define CSB_ROP 0x2000 /* Readonly if protected */
-#define CSB_SOP 0x4000 /* Supervisor only if protected */
-#define CSB_RO 0x8000 /* Read-Only */
-
-#define CSC_EN 0x0001 /* Chip-Select Enable */
-#define CSC_SIZ_MASK 0x000e /* Chip-Select Size */
-#define CSC_SIZ_SHIFT 1
-#define CSC_WS_MASK 0x0070 /* Wait State */
-#define CSC_WS_SHIFT 4
-#define CSC_BSW 0x0080 /* Data Bus Width */
-#define CSC_FLASH 0x0100 /* FLASH Memory Support */
-#define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
-#define CSC_UPSIZ_SHIFT 11
-#define CSC_ROP 0x2000 /* Readonly if protected */
-#define CSC_SOP 0x4000 /* Supervisor only if protected */
-#define CSC_RO 0x8000 /* Read-Only */
-
-#define CSD_EN 0x0001 /* Chip-Select Enable */
-#define CSD_SIZ_MASK 0x000e /* Chip-Select Size */
-#define CSD_SIZ_SHIFT 1
-#define CSD_WS_MASK 0x0070 /* Wait State */
-#define CSD_WS_SHIFT 4
-#define CSD_BSW 0x0080 /* Data Bus Width */
-#define CSD_FLASH 0x0100 /* FLASH Memory Support */
-#define CSD_DRAM 0x0200 /* Dram Selection */
-#define CSD_COMB 0x0400 /* Combining */
-#define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
-#define CSD_UPSIZ_SHIFT 11
-#define CSD_ROP 0x2000 /* Readonly if protected */
-#define CSD_SOP 0x4000 /* Supervisor only if protected */
-#define CSD_RO 0x8000 /* Read-Only */
-
-/*
- * Emulation Chip-Select Register
- */
-#define EMUCS_ADDR 0xfffff118
-#define EMUCS WORD_REF(EMUCS_ADDR)
-
-#define EMUCS_WS_MASK 0x0070
-#define EMUCS_WS_SHIFT 4
-
-/**********
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
-
-/*
- * PLL Control Register
- */
-#define PLLCR_ADDR 0xfffff200
-#define PLLCR WORD_REF(PLLCR_ADDR)
-
-#define PLLCR_DISPLL 0x0008 /* Disable PLL */
-#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */
-#define PLLCR_PRESC 0x0020 /* VCO prescaler */
-#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */
-#define PLLCR_SYSCLK_SEL_SHIFT 8
-#define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */
-#define PLLCR_LCDCLK_SEL_SHIFT 11
-
-/* '328-compatible definitions */
-#define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK
-#define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT
-
-/*
- * PLL Frequency Select Register
- */
-#define PLLFSR_ADDR 0xfffff202
-#define PLLFSR WORD_REF(PLLFSR_ADDR)
-
-#define PLLFSR_PC_MASK 0x00ff /* P Count */
-#define PLLFSR_PC_SHIFT 0
-#define PLLFSR_QC_MASK 0x0f00 /* Q Count */
-#define PLLFSR_QC_SHIFT 8
-#define PLLFSR_PROT 0x4000 /* Protect P & Q */
-#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */
-
-/*
- * Power Control Register
- */
-#define PCTRL_ADDR 0xfffff207
-#define PCTRL BYTE_REF(PCTRL_ADDR)
-
-#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */
-#define PCTRL_WIDTH_SHIFT 0
-#define PCTRL_PCEN 0x80 /* Power Control Enable */
-
-/**********
- *
- * 0xFFFFF3xx -- Interrupt Controller
- *
- **********/
-
-/*
- * Interrupt Vector Register
- */
-#define IVR_ADDR 0xfffff300
-#define IVR BYTE_REF(IVR_ADDR)
-
-#define IVR_VECTOR_MASK 0xF8
-
-/*
- * Interrupt control Register
- */
-#define ICR_ADDR 0xfffff302
-#define ICR WORD_REF(ICR_ADDR)
-
-#define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */
-#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */
-#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */
-#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */
-#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */
-#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */
-#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */
-#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */
-#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */
-
-/*
- * Interrupt Mask Register
- */
-#define IMR_ADDR 0xfffff304
-#define IMR LONG_REF(IMR_ADDR)
-
-/*
- * Define the names for bit positions first. This is useful for
- * request_irq
- */
-#define SPI_IRQ_NUM 0 /* SPI interrupt */
-#define TMR_IRQ_NUM 1 /* Timer interrupt */
-#define UART_IRQ_NUM 2 /* UART interrupt */
-#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */
-#define RTC_IRQ_NUM 4 /* RTC interrupt */
-#define KB_IRQ_NUM 6 /* Keyboard Interrupt */
-#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */
-#define INT0_IRQ_NUM 8 /* External INT0 */
-#define INT1_IRQ_NUM 9 /* External INT1 */
-#define INT2_IRQ_NUM 10 /* External INT2 */
-#define INT3_IRQ_NUM 11 /* External INT3 */
-#define IRQ1_IRQ_NUM 16 /* IRQ1 */
-#define IRQ2_IRQ_NUM 17 /* IRQ2 */
-#define IRQ3_IRQ_NUM 18 /* IRQ3 */
-#define IRQ6_IRQ_NUM 19 /* IRQ6 */
-#define IRQ5_IRQ_NUM 20 /* IRQ5 */
-#define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */
-#define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define SPIM_IRQ_NUM SPI_IRQ_NUM
-#define TMR1_IRQ_NUM TMR_IRQ_NUM
-
-/*
- * Here go the bitmasks themselves
- */
-#define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */
-#define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */
-#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
-#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
-#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */
-#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */
-#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */
-#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */
-#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */
-#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */
-#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */
-#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */
-#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */
-#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */
-#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */
-#define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */
-#define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */
-#define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IMR_MSPIM IMR_MSPI
-#define IMR_MTMR1 IMR_MTMR
-
-/*
- * Interrupt Status Register
- */
-#define ISR_ADDR 0xfffff30c
-#define ISR LONG_REF(ISR_ADDR)
-
-#define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */
-#define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */
-#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
-#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
-#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
-#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
-#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */
-#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
-#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
-#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
-#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
-#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
-#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
-#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
-#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
-#define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */
-#define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */
-#define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define ISR_SPIM ISR_SPI
-#define ISR_TMR1 ISR_TMR
-
-/*
- * Interrupt Pending Register
- */
-#define IPR_ADDR 0xfffff30c
-#define IPR LONG_REF(IPR_ADDR)
-
-#define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */
-#define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */
-#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
-#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
-#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
-#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
-#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */
-#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
-#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
-#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
-#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
-#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
-#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
-#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
-#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
-#define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */
-#define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */
-#define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IPR_SPIM IPR_SPI
-#define IPR_TMR1 IPR_TMR
-
-/**********
- *
- * 0xFFFFF4xx -- Parallel Ports
- *
- **********/
-
-/*
- * Port A
- */
-#define PADIR_ADDR 0xfffff400 /* Port A direction reg */
-#define PADATA_ADDR 0xfffff401 /* Port A data register */
-#define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */
-
-#define PADIR BYTE_REF(PADIR_ADDR)
-#define PADATA BYTE_REF(PADATA_ADDR)
-#define PAPUEN BYTE_REF(PAPUEN_ADDR)
-
-#define PA(x) (1 << (x))
-
-/*
- * Port B
- */
-#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */
-#define PBDATA_ADDR 0xfffff409 /* Port B data register */
-#define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */
-#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */
-
-#define PBDIR BYTE_REF(PBDIR_ADDR)
-#define PBDATA BYTE_REF(PBDATA_ADDR)
-#define PBPUEN BYTE_REF(PBPUEN_ADDR)
-#define PBSEL BYTE_REF(PBSEL_ADDR)
-
-#define PB(x) (1 << (x))
-
-#define PB_CSB0 0x01 /* Use CSB0 as PB[0] */
-#define PB_CSB1 0x02 /* Use CSB1 as PB[1] */
-#define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */
-#define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */
-#define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */
-#define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */
-#define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */
-#define PB_PWMO 0x80 /* Use PWMO as PB[7] */
-
-/*
- * Port C
- */
-#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */
-#define PCDATA_ADDR 0xfffff411 /* Port C data register */
-#define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */
-#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */
-
-#define PCDIR BYTE_REF(PCDIR_ADDR)
-#define PCDATA BYTE_REF(PCDATA_ADDR)
-#define PCPDEN BYTE_REF(PCPDEN_ADDR)
-#define PCSEL BYTE_REF(PCSEL_ADDR)
-
-#define PC(x) (1 << (x))
-
-#define PC_LD0 0x01 /* Use LD0 as PC[0] */
-#define PC_LD1 0x02 /* Use LD1 as PC[1] */
-#define PC_LD2 0x04 /* Use LD2 as PC[2] */
-#define PC_LD3 0x08 /* Use LD3 as PC[3] */
-#define PC_LFLM 0x10 /* Use LFLM as PC[4] */
-#define PC_LLP 0x20 /* Use LLP as PC[5] */
-#define PC_LCLK 0x40 /* Use LCLK as PC[6] */
-#define PC_LACD 0x80 /* Use LACD as PC[7] */
-
-/*
- * Port D
- */
-#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */
-#define PDDATA_ADDR 0xfffff419 /* Port D data register */
-#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */
-#define PDSEL_ADDR 0xfffff41b /* Port D Select Register */
-#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */
-#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */
-#define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */
-#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */
-
-#define PDDIR BYTE_REF(PDDIR_ADDR)
-#define PDDATA BYTE_REF(PDDATA_ADDR)
-#define PDPUEN BYTE_REF(PDPUEN_ADDR)
-#define PDSEL BYTE_REF(PDSEL_ADDR)
-#define PDPOL BYTE_REF(PDPOL_ADDR)
-#define PDIRQEN BYTE_REF(PDIRQEN_ADDR)
-#define PDKBEN BYTE_REF(PDKBEN_ADDR)
-#define PDIQEG BYTE_REF(PDIQEG_ADDR)
-
-#define PD(x) (1 << (x))
-
-#define PD_INT0 0x01 /* Use INT0 as PD[0] */
-#define PD_INT1 0x02 /* Use INT1 as PD[1] */
-#define PD_INT2 0x04 /* Use INT2 as PD[2] */
-#define PD_INT3 0x08 /* Use INT3 as PD[3] */
-#define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */
-#define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */
-#define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */
-#define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */
-
-/*
- * Port E
- */
-#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */
-#define PEDATA_ADDR 0xfffff421 /* Port E data register */
-#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */
-#define PESEL_ADDR 0xfffff423 /* Port E Select Register */
-
-#define PEDIR BYTE_REF(PEDIR_ADDR)
-#define PEDATA BYTE_REF(PEDATA_ADDR)
-#define PEPUEN BYTE_REF(PEPUEN_ADDR)
-#define PESEL BYTE_REF(PESEL_ADDR)
-
-#define PE(x) (1 << (x))
-
-#define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */
-#define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */
-#define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */
-#define PE_DWE 0x08 /* Use DWE as PE[3] */
-#define PE_RXD 0x10 /* Use RXD as PE[4] */
-#define PE_TXD 0x20 /* Use TXD as PE[5] */
-#define PE_RTS 0x40 /* Use RTS as PE[6] */
-#define PE_CTS 0x80 /* Use CTS as PE[7] */
-
-/*
- * Port F
- */
-#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */
-#define PFDATA_ADDR 0xfffff429 /* Port F data register */
-#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */
-#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */
-
-#define PFDIR BYTE_REF(PFDIR_ADDR)
-#define PFDATA BYTE_REF(PFDATA_ADDR)
-#define PFPUEN BYTE_REF(PFPUEN_ADDR)
-#define PFSEL BYTE_REF(PFSEL_ADDR)
-
-#define PF(x) (1 << (x))
-
-#define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */
-#define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */
-#define PF_CLKO 0x04 /* Use CLKO as PF[2] */
-#define PF_A20 0x08 /* Use A20 as PF[3] */
-#define PF_A21 0x10 /* Use A21 as PF[4] */
-#define PF_A22 0x20 /* Use A22 as PF[5] */
-#define PF_A23 0x40 /* Use A23 as PF[6] */
-#define PF_CSA1 0x80 /* Use CSA1 as PF[7] */
-
-/*
- * Port G
- */
-#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */
-#define PGDATA_ADDR 0xfffff431 /* Port G data register */
-#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */
-#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */
-
-#define PGDIR BYTE_REF(PGDIR_ADDR)
-#define PGDATA BYTE_REF(PGDATA_ADDR)
-#define PGPUEN BYTE_REF(PGPUEN_ADDR)
-#define PGSEL BYTE_REF(PGSEL_ADDR)
-
-#define PG(x) (1 << (x))
-
-#define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */
-#define PG_A0 0x02 /* Use A0 as PG[1] */
-#define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */
-#define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */
-#define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */
-#define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */
-
-/**********
- *
- * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
- *
- **********/
-
-/*
- * PWM Control Register
- */
-#define PWMC_ADDR 0xfffff500
-#define PWMC WORD_REF(PWMC_ADDR)
-
-#define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */
-#define PWMC_CLKSEL_SHIFT 0
-#define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */
-#define PWMC_REPEAT_SHIFT 2
-#define PWMC_EN 0x0010 /* Enable PWM */
-#define PMNC_FIFOAV 0x0020 /* FIFO Available */
-#define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */
-#define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */
-#define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */
-#define PWMC_PRESCALER_SHIFT 8
-#define PWMC_CLKSRC 0x8000 /* Clock Source Select */
-
-/* '328-compatible definitions */
-#define PWMC_PWMEN PWMC_EN
-
-/*
- * PWM Sample Register
- */
-#define PWMS_ADDR 0xfffff502
-#define PWMS WORD_REF(PWMS_ADDR)
-
-/*
- * PWM Period Register
- */
-#define PWMP_ADDR 0xfffff504
-#define PWMP BYTE_REF(PWMP_ADDR)
-
-/*
- * PWM Counter Register
- */
-#define PWMCNT_ADDR 0xfffff505
-#define PWMCNT BYTE_REF(PWMCNT_ADDR)
-
-/**********
- *
- * 0xFFFFF6xx -- General-Purpose Timer
- *
- **********/
-
-/*
- * Timer Control register
- */
-#define TCTL_ADDR 0xfffff600
-#define TCTL WORD_REF(TCTL_ADDR)
-
-#define TCTL_TEN 0x0001 /* Timer Enable */
-#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */
-#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */
-#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */
-#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */
-#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */
-#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */
-#define TCTL_IRQEN 0x0010 /* IRQ Enable */
-#define TCTL_OM 0x0020 /* Output Mode */
-#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */
-#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */
-#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */
-#define TCTL_FRR 0x0010 /* Free-Run Mode */
-
-/* '328-compatible definitions */
-#define TCTL1_ADDR TCTL_ADDR
-#define TCTL1 TCTL
-
-/*
- * Timer Prescaler Register
- */
-#define TPRER_ADDR 0xfffff602
-#define TPRER WORD_REF(TPRER_ADDR)
-
-/* '328-compatible definitions */
-#define TPRER1_ADDR TPRER_ADDR
-#define TPRER1 TPRER
-
-/*
- * Timer Compare Register
- */
-#define TCMP_ADDR 0xfffff604
-#define TCMP WORD_REF(TCMP_ADDR)
-
-/* '328-compatible definitions */
-#define TCMP1_ADDR TCMP_ADDR
-#define TCMP1 TCMP
-
-/*
- * Timer Capture register
- */
-#define TCR_ADDR 0xfffff606
-#define TCR WORD_REF(TCR_ADDR)
-
-/* '328-compatible definitions */
-#define TCR1_ADDR TCR_ADDR
-#define TCR1 TCR
-
-/*
- * Timer Counter Register
- */
-#define TCN_ADDR 0xfffff608
-#define TCN WORD_REF(TCN_ADDR)
-
-/* '328-compatible definitions */
-#define TCN1_ADDR TCN_ADDR
-#define TCN1 TCN
-
-/*
- * Timer Status Register
- */
-#define TSTAT_ADDR 0xfffff60a
-#define TSTAT WORD_REF(TSTAT_ADDR)
-
-#define TSTAT_COMP 0x0001 /* Compare Event occurred */
-#define TSTAT_CAPT 0x0001 /* Capture Event occurred */
-
-/* '328-compatible definitions */
-#define TSTAT1_ADDR TSTAT_ADDR
-#define TSTAT1 TSTAT
-
-/**********
- *
- * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
- *
- **********/
-
-/*
- * SPIM Data Register
- */
-#define SPIMDATA_ADDR 0xfffff800
-#define SPIMDATA WORD_REF(SPIMDATA_ADDR)
-
-/*
- * SPIM Control/Status Register
- */
-#define SPIMCONT_ADDR 0xfffff802
-#define SPIMCONT WORD_REF(SPIMCONT_ADDR)
-
-#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */
-#define SPIMCONT_BIT_COUNT_SHIFT 0
-#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */
-#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */
-#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */
-#define SPIMCONT_IRQ 0x0080 /* Interrupt Request */
-#define SPIMCONT_XCH 0x0100 /* Exchange */
-#define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */
-#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */
-#define SPIMCONT_DATA_RATE_SHIFT 13
-
-/* '328-compatible definitions */
-#define SPIMCONT_SPIMIRQ SPIMCONT_IRQ
-#define SPIMCONT_SPIMEN SPIMCONT_ENABLE
-
-/**********
- *
- * 0xFFFFF9xx -- UART
- *
- **********/
-
-/*
- * UART Status/Control Register
- */
-#define USTCNT_ADDR 0xfffff900
-#define USTCNT WORD_REF(USTCNT_ADDR)
-
-#define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */
-#define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */
-#define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */
-#define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */
-#define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */
-#define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */
-#define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */
-#define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */
-#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */
-#define USTCNT_STOP 0x0200 /* Stop bit transmission */
-#define USTCNT_ODD 0x0400 /* Odd Parity */
-#define USTCNT_PEN 0x0800 /* Parity Enable */
-#define USTCNT_CLKM 0x1000 /* Clock Mode Select */
-#define USTCNT_TXEN 0x2000 /* Transmitter Enable */
-#define USTCNT_RXEN 0x4000 /* Receiver Enable */
-#define USTCNT_UEN 0x8000 /* UART Enable */
-
-/* '328-compatible definitions */
-#define USTCNT_TXAVAILEN USTCNT_TXAE
-#define USTCNT_TXHALFEN USTCNT_TXHE
-#define USTCNT_TXEMPTYEN USTCNT_TXEE
-#define USTCNT_RXREADYEN USTCNT_RXRE
-#define USTCNT_RXHALFEN USTCNT_RXHE
-#define USTCNT_RXFULLEN USTCNT_RXFE
-#define USTCNT_CTSDELTAEN USTCNT_CTSD
-#define USTCNT_ODD_EVEN USTCNT_ODD
-#define USTCNT_PARITYEN USTCNT_PEN
-#define USTCNT_CLKMODE USTCNT_CLKM
-#define USTCNT_UARTEN USTCNT_UEN
-
-/*
- * UART Baud Control Register
- */
-#define UBAUD_ADDR 0xfffff902
-#define UBAUD WORD_REF(UBAUD_ADDR)
-
-#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
-#define UBAUD_PRESCALER_SHIFT 0
-#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
-#define UBAUD_DIVIDE_SHIFT 8
-#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
-#define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */
-
-/*
- * UART Receiver Register
- */
-#define URX_ADDR 0xfffff904
-#define URX WORD_REF(URX_ADDR)
-
-#define URX_RXDATA_ADDR 0xfffff905
-#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR)
-
-#define URX_RXDATA_MASK 0x00ff /* Received data */
-#define URX_RXDATA_SHIFT 0
-#define URX_PARITY_ERROR 0x0100 /* Parity Error */
-#define URX_BREAK 0x0200 /* Break Detected */
-#define URX_FRAME_ERROR 0x0400 /* Framing Error */
-#define URX_OVRUN 0x0800 /* Serial Overrun */
-#define URX_OLD_DATA 0x1000 /* Old data in FIFO */
-#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */
-#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */
-#define URX_FIFO_FULL 0x8000 /* FIFO is Full */
-
-/*
- * UART Transmitter Register
- */
-#define UTX_ADDR 0xfffff906
-#define UTX WORD_REF(UTX_ADDR)
-
-#define UTX_TXDATA_ADDR 0xfffff907
-#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR)
-
-#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */
-#define UTX_TXDATA_SHIFT 0
-#define UTX_CTS_DELTA 0x0100 /* CTS changed */
-#define UTX_CTS_STAT 0x0200 /* CTS State */
-#define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */
-#define UTX_NOCTS 0x0800 /* Ignore CTS */
-#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */
-#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */
-#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */
-#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */
-
-/* '328-compatible definitions */
-#define UTX_CTS_STATUS UTX_CTS_STAT
-#define UTX_IGNORE_CTS UTX_NOCTS
-
-/*
- * UART Miscellaneous Register
- */
-#define UMISC_ADDR 0xfffff908
-#define UMISC WORD_REF(UMISC_ADDR)
-
-#define UMISC_TX_POL 0x0004 /* Transmit Polarity */
-#define UMISC_RX_POL 0x0008 /* Receive Polarity */
-#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */
-#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */
-#define UMISC_RTS 0x0040 /* Set RTS status */
-#define UMISC_RTSCONT 0x0080 /* Choose RTS control */
-#define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */
-#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */
-#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */
-#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */
-#define UMISC_CLKSRC 0x4000 /* Clock Source */
-#define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */
-
-/*
- * UART Non-integer Prescaler Register
- */
-#define NIPR_ADDR 0xfffff90a
-#define NIPR WORD_REF(NIPR_ADDR)
-
-#define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */
-#define NIPR_STEP_VALUE_SHIFT 0
-#define NIPR_SELECT_MASK 0x0700 /* Tap Selection */
-#define NIPR_SELECT_SHIFT 8
-#define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */
-
-
-/* generalization of uart control registers to support multiple ports: */
-typedef volatile struct {
- volatile unsigned short int ustcnt;
- volatile unsigned short int ubaud;
- union {
- volatile unsigned short int w;
- struct {
- volatile unsigned char status;
- volatile unsigned char rxdata;
- } b;
- } urx;
- union {
- volatile unsigned short int w;
- struct {
- volatile unsigned char status;
- volatile unsigned char txdata;
- } b;
- } utx;
- volatile unsigned short int umisc;
- volatile unsigned short int nipr;
- volatile unsigned short int pad1;
- volatile unsigned short int pad2;
-} __attribute__((packed)) m68328_uart;
-
-
-/**********
- *
- * 0xFFFFFAxx -- LCD Controller
- *
- **********/
-
-/*
- * LCD Screen Starting Address Register
- */
-#define LSSA_ADDR 0xfffffa00
-#define LSSA LONG_REF(LSSA_ADDR)
-
-#define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */
-
-/*
- * LCD Virtual Page Width Register
- */
-#define LVPW_ADDR 0xfffffa05
-#define LVPW BYTE_REF(LVPW_ADDR)
-
-/*
- * LCD Screen Width Register (not compatible with '328 !!!)
- */
-#define LXMAX_ADDR 0xfffffa08
-#define LXMAX WORD_REF(LXMAX_ADDR)
-
-#define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */
-
-/*
- * LCD Screen Height Register
- */
-#define LYMAX_ADDR 0xfffffa0a
-#define LYMAX WORD_REF(LYMAX_ADDR)
-
-#define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */
-
-/*
- * LCD Cursor X Position Register
- */
-#define LCXP_ADDR 0xfffffa18
-#define LCXP WORD_REF(LCXP_ADDR)
-
-#define LCXP_CC_MASK 0xc000 /* Cursor Control */
-#define LCXP_CC_TRAMSPARENT 0x0000
-#define LCXP_CC_BLACK 0x4000
-#define LCXP_CC_REVERSED 0x8000
-#define LCXP_CC_WHITE 0xc000
-#define LCXP_CXP_MASK 0x02ff /* Cursor X position */
-
-/*
- * LCD Cursor Y Position Register
- */
-#define LCYP_ADDR 0xfffffa1a
-#define LCYP WORD_REF(LCYP_ADDR)
-
-#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */
-
-/*
- * LCD Cursor Width and Heigth Register
- */
-#define LCWCH_ADDR 0xfffffa1c
-#define LCWCH WORD_REF(LCWCH_ADDR)
-
-#define LCWCH_CH_MASK 0x001f /* Cursor Height */
-#define LCWCH_CH_SHIFT 0
-#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */
-#define LCWCH_CW_SHIFT 8
-
-/*
- * LCD Blink Control Register
- */
-#define LBLKC_ADDR 0xfffffa1f
-#define LBLKC BYTE_REF(LBLKC_ADDR)
-
-#define LBLKC_BD_MASK 0x7f /* Blink Divisor */
-#define LBLKC_BD_SHIFT 0
-#define LBLKC_BKEN 0x80 /* Blink Enabled */
-
-/*
- * LCD Panel Interface Configuration Register
- */
-#define LPICF_ADDR 0xfffffa20
-#define LPICF BYTE_REF(LPICF_ADDR)
-
-#define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */
-#define LPICF_GS_BW 0x00
-#define LPICF_GS_GRAY_4 0x01
-#define LPICF_GS_GRAY_16 0x02
-#define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */
-#define LPICF_PBSIZ_1 0x00
-#define LPICF_PBSIZ_2 0x04
-#define LPICF_PBSIZ_4 0x08
-
-/*
- * LCD Polarity Configuration Register
- */
-#define LPOLCF_ADDR 0xfffffa21
-#define LPOLCF BYTE_REF(LPOLCF_ADDR)
-
-#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */
-#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */
-#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */
-#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */
-
-/*
- * LACD (LCD Alternate Crystal Direction) Rate Control Register
- */
-#define LACDRC_ADDR 0xfffffa23
-#define LACDRC BYTE_REF(LACDRC_ADDR)
-
-#define LACDRC_ACDSLT 0x80 /* Signal Source Select */
-#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */
-#define LACDRC_ACD_SHIFT 0
-
-/*
- * LCD Pixel Clock Divider Register
- */
-#define LPXCD_ADDR 0xfffffa25
-#define LPXCD BYTE_REF(LPXCD_ADDR)
-
-#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */
-#define LPXCD_PCD_SHIFT 0
-
-/*
- * LCD Clocking Control Register
- */
-#define LCKCON_ADDR 0xfffffa27
-#define LCKCON BYTE_REF(LCKCON_ADDR)
-
-#define LCKCON_DWS_MASK 0x0f /* Display Wait-State */
-#define LCKCON_DWS_SHIFT 0
-#define LCKCON_DWIDTH 0x40 /* Display Memory Width */
-#define LCKCON_LCDON 0x80 /* Enable LCD Controller */
-
-/* '328-compatible definitions */
-#define LCKCON_DW_MASK LCKCON_DWS_MASK
-#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
-
-/*
- * LCD Refresh Rate Adjustment Register
- */
-#define LRRA_ADDR 0xfffffa29
-#define LRRA BYTE_REF(LRRA_ADDR)
-
-/*
- * LCD Panning Offset Register
- */
-#define LPOSR_ADDR 0xfffffa2d
-#define LPOSR BYTE_REF(LPOSR_ADDR)
-
-#define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */
-#define LPOSR_POS_SHIFT 0
-
-/*
- * LCD Frame Rate Control Modulation Register
- */
-#define LFRCM_ADDR 0xfffffa31
-#define LFRCM BYTE_REF(LFRCM_ADDR)
-
-#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */
-#define LFRCM_YMOD_SHIFT 0
-#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */
-#define LFRCM_XMOD_SHIFT 4
-
-/*
- * LCD Gray Palette Mapping Register
- */
-#define LGPMR_ADDR 0xfffffa33
-#define LGPMR BYTE_REF(LGPMR_ADDR)
-
-#define LGPMR_G1_MASK 0x0f
-#define LGPMR_G1_SHIFT 0
-#define LGPMR_G2_MASK 0xf0
-#define LGPMR_G2_SHIFT 4
-
-/*
- * PWM Contrast Control Register
- */
-#define PWMR_ADDR 0xfffffa36
-#define PWMR WORD_REF(PWMR_ADDR)
-
-#define PWMR_PW_MASK 0x00ff /* Pulse Width */
-#define PWMR_PW_SHIFT 0
-#define PWMR_CCPEN 0x0100 /* Contrast Control Enable */
-#define PWMR_SRC_MASK 0x0600 /* Input Clock Source */
-#define PWMR_SRC_LINE 0x0000 /* Line Pulse */
-#define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */
-#define PWMR_SRC_LCD 0x4000 /* LCD clock */
-
-/**********
- *
- * 0xFFFFFBxx -- Real-Time Clock (RTC)
- *
- **********/
-
-/*
- * RTC Hours Minutes and Seconds Register
- */
-#define RTCTIME_ADDR 0xfffffb00
-#define RTCTIME LONG_REF(RTCTIME_ADDR)
-
-#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */
-#define RTCTIME_SECONDS_SHIFT 0
-#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */
-#define RTCTIME_MINUTES_SHIFT 16
-#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */
-#define RTCTIME_HOURS_SHIFT 24
-
-/*
- * RTC Alarm Register
- */
-#define RTCALRM_ADDR 0xfffffb04
-#define RTCALRM LONG_REF(RTCALRM_ADDR)
-
-#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */
-#define RTCALRM_SECONDS_SHIFT 0
-#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */
-#define RTCALRM_MINUTES_SHIFT 16
-#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */
-#define RTCALRM_HOURS_SHIFT 24
-
-/*
- * Watchdog Timer Register
- */
-#define WATCHDOG_ADDR 0xfffffb0a
-#define WATCHDOG WORD_REF(WATCHDOG_ADDR)
-
-#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */
-#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */
-#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */
-#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */
-#define WATCHDOG_CNT_SHIFT 8
-
-/*
- * RTC Control Register
- */
-#define RTCCTL_ADDR 0xfffffb0c
-#define RTCCTL WORD_REF(RTCCTL_ADDR)
-
-#define RTCCTL_XTL 0x0020 /* Crystal Selection */
-#define RTCCTL_EN 0x0080 /* RTC Enable */
-
-/* '328-compatible definitions */
-#define RTCCTL_384 RTCCTL_XTL
-#define RTCCTL_ENABLE RTCCTL_EN
-
-/*
- * RTC Interrupt Status Register
- */
-#define RTCISR_ADDR 0xfffffb0e
-#define RTCISR WORD_REF(RTCISR_ADDR)
-
-#define RTCISR_SW 0x0001 /* Stopwatch timed out */
-#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */
-#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */
-#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */
-#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */
-#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */
-#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */
-#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */
-#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */
-#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */
-#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */
-#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */
-#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */
-#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */
-
-/*
- * RTC Interrupt Enable Register
- */
-#define RTCIENR_ADDR 0xfffffb10
-#define RTCIENR WORD_REF(RTCIENR_ADDR)
-
-#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */
-#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */
-#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */
-#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */
-#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */
-#define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */
-#define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */
-#define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */
-#define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */
-#define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */
-#define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */
-#define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */
-#define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */
-#define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */
-
-/*
- * Stopwatch Minutes Register
- */
-#define STPWCH_ADDR 0xfffffb12
-#define STPWCH WORD_REF(STPWCH)
-
-#define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */
-#define SPTWCH_CNT_SHIFT 0
-
-/*
- * RTC Day Count Register
- */
-#define DAYR_ADDR 0xfffffb1a
-#define DAYR WORD_REF(DAYR_ADDR)
-
-#define DAYR_DAYS_MASK 0x1ff /* Day Setting */
-#define DAYR_DAYS_SHIFT 0
-
-/*
- * RTC Day Alarm Register
- */
-#define DAYALARM_ADDR 0xfffffb1c
-#define DAYALARM WORD_REF(DAYALARM_ADDR)
-
-#define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */
-#define DAYALARM_DAYSAL_SHIFT 0
-
-/**********
- *
- * 0xFFFFFCxx -- DRAM Controller
- *
- **********/
-
-/*
- * DRAM Memory Configuration Register
- */
-#define DRAMMC_ADDR 0xfffffc00
-#define DRAMMC WORD_REF(DRAMMC_ADDR)
-
-#define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */
-#define DRAMMC_ROW12_PA10 0x0000
-#define DRAMMC_ROW12_PA21 0x4000
-#define DRAMMC_ROW12_PA23 0x8000
-#define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */
-#define DRAMMC_ROW0_PA11 0x0000
-#define DRAMMC_ROW0_PA22 0x1000
-#define DRAMMC_ROW0_PA23 0x2000
-#define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */
-#define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */
-#define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */
-#define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */
-#define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */
-#define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */
-#define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */
-#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */
-#define DRAMMC_REF_SHIFT 0
-
-/*
- * DRAM Control Register
- */
-#define DRAMC_ADDR 0xfffffc02
-#define DRAMC WORD_REF(DRAMC_ADDR)
-
-#define DRAMC_DWE 0x0001 /* DRAM Write Enable */
-#define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */
-#define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */
-#define DRAMC_SLW 0x0008 /* Slow RAM */
-#define DRAMC_LSP 0x0010 /* Light Sleep */
-#define DRAMC_MSW 0x0020 /* Slow Multiplexing */
-#define DRAMC_WS_MASK 0x00c0 /* Wait-states */
-#define DRAMC_WS_SHIFT 6
-#define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */
-#define DRAMC_PGSZ_SHIFT 8
-#define DRAMC_PGSZ_256K 0x0000
-#define DRAMC_PGSZ_512K 0x0100
-#define DRAMC_PGSZ_1024K 0x0200
-#define DRAMC_PGSZ_2048K 0x0300
-#define DRAMC_EDO 0x0400 /* EDO DRAM */
-#define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */
-#define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */
-#define DRAMC_BC_SHIFT 12
-#define DRAMC_RM 0x4000 /* Refresh Mode */
-#define DRAMC_EN 0x8000 /* DRAM Controller enable */
-
-
-/**********
- *
- * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
- *
- **********/
-
-/*
- * ICE Module Address Compare Register
- */
-#define ICEMACR_ADDR 0xfffffd00
-#define ICEMACR LONG_REF(ICEMACR_ADDR)
-
-/*
- * ICE Module Address Mask Register
- */
-#define ICEMAMR_ADDR 0xfffffd04
-#define ICEMAMR LONG_REF(ICEMAMR_ADDR)
-
-/*
- * ICE Module Control Compare Register
- */
-#define ICEMCCR_ADDR 0xfffffd08
-#define ICEMCCR WORD_REF(ICEMCCR_ADDR)
-
-#define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */
-#define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */
-
-/*
- * ICE Module Control Mask Register
- */
-#define ICEMCMR_ADDR 0xfffffd0a
-#define ICEMCMR WORD_REF(ICEMCMR_ADDR)
-
-#define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */
-#define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */
-
-/*
- * ICE Module Control Register
- */
-#define ICEMCR_ADDR 0xfffffd0c
-#define ICEMCR WORD_REF(ICEMCR_ADDR)
-
-#define ICEMCR_CEN 0x0001 /* Compare Enable */
-#define ICEMCR_PBEN 0x0002 /* Program Break Enable */
-#define ICEMCR_SB 0x0004 /* Single Breakpoint */
-#define ICEMCR_HMDIS 0x0008 /* HardMap disable */
-#define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */
-
-/*
- * ICE Module Status Register
- */
-#define ICEMSR_ADDR 0xfffffd0e
-#define ICEMSR WORD_REF(ICEMSR_ADDR)
-
-#define ICEMSR_EMUEN 0x0001 /* Emulation Enable */
-#define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */
-#define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */
-#define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */
-
-#endif /* _MC68EZ328_H_ */
+++ /dev/null
-
-/* include/asm-m68knommu/MC68VZ328.h: 'VZ328 control registers
- *
- * Copyright (c) 2000-2001 Lineo Inc. <www.lineo.com>
- * Copyright (c) 2000-2001 Lineo Canada Corp. <www.lineo.ca>
- * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
- * Bare & Hare Software, Inc.
- * Based on include/asm-m68knommu/MC68332.h
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
- * The Silver Hammer Group, Ltd.
- *
- * M68VZ328 fixes by Evan Stawnyczy <evan@lineo.com>
- * vz multiport fixes by Michael Leslie <mleslie@lineo.com>
- */
-
-#ifndef _MC68VZ328_H_
-#define _MC68VZ328_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-#define LONG_REF(addr) (*((volatile unsigned long*)addr))
-
-#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
-#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
-
-/**********
- *
- * 0xFFFFF0xx -- System Control
- *
- **********/
-
-/*
- * System Control Register (SCR)
- */
-#define SCR_ADDR 0xfffff000
-#define SCR BYTE_REF(SCR_ADDR)
-
-#define SCR_WDTH8 0x01 /* 8-Bit Width Select */
-#define SCR_DMAP 0x04 /* Double Map */
-#define SCR_SO 0x08 /* Supervisor Only */
-#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */
-#define SCR_PRV 0x20 /* Privilege Violation */
-#define SCR_WPV 0x40 /* Write Protect Violation */
-#define SCR_BETO 0x80 /* Bus-Error TimeOut */
-
-/*
- * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
- */
-#define MRR_ADDR 0xfffff004
-#define MRR LONG_REF(MRR_ADDR)
-
-/**********
- *
- * 0xFFFFF1xx -- Chip-Select logic
- *
- **********/
-
-/*
- * Chip Select Group Base Registers
- */
-#define CSGBA_ADDR 0xfffff100
-#define CSGBB_ADDR 0xfffff102
-
-#define CSGBC_ADDR 0xfffff104
-#define CSGBD_ADDR 0xfffff106
-
-#define CSGBA WORD_REF(CSGBA_ADDR)
-#define CSGBB WORD_REF(CSGBB_ADDR)
-#define CSGBC WORD_REF(CSGBC_ADDR)
-#define CSGBD WORD_REF(CSGBD_ADDR)
-
-/*
- * Chip Select Registers
- */
-#define CSA_ADDR 0xfffff110
-#define CSB_ADDR 0xfffff112
-#define CSC_ADDR 0xfffff114
-#define CSD_ADDR 0xfffff116
-
-#define CSA WORD_REF(CSA_ADDR)
-#define CSB WORD_REF(CSB_ADDR)
-#define CSC WORD_REF(CSC_ADDR)
-#define CSD WORD_REF(CSD_ADDR)
-
-#define CSA_EN 0x0001 /* Chip-Select Enable */
-#define CSA_SIZ_MASK 0x000e /* Chip-Select Size */
-#define CSA_SIZ_SHIFT 1
-#define CSA_WS_MASK 0x0070 /* Wait State */
-#define CSA_WS_SHIFT 4
-#define CSA_BSW 0x0080 /* Data Bus Width */
-#define CSA_FLASH 0x0100 /* FLASH Memory Support */
-#define CSA_RO 0x8000 /* Read-Only */
-
-#define CSB_EN 0x0001 /* Chip-Select Enable */
-#define CSB_SIZ_MASK 0x000e /* Chip-Select Size */
-#define CSB_SIZ_SHIFT 1
-#define CSB_WS_MASK 0x0070 /* Wait State */
-#define CSB_WS_SHIFT 4
-#define CSB_BSW 0x0080 /* Data Bus Width */
-#define CSB_FLASH 0x0100 /* FLASH Memory Support */
-#define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
-#define CSB_UPSIZ_SHIFT 11
-#define CSB_ROP 0x2000 /* Readonly if protected */
-#define CSB_SOP 0x4000 /* Supervisor only if protected */
-#define CSB_RO 0x8000 /* Read-Only */
-
-#define CSC_EN 0x0001 /* Chip-Select Enable */
-#define CSC_SIZ_MASK 0x000e /* Chip-Select Size */
-#define CSC_SIZ_SHIFT 1
-#define CSC_WS_MASK 0x0070 /* Wait State */
-#define CSC_WS_SHIFT 4
-#define CSC_BSW 0x0080 /* Data Bus Width */
-#define CSC_FLASH 0x0100 /* FLASH Memory Support */
-#define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
-#define CSC_UPSIZ_SHIFT 11
-#define CSC_ROP 0x2000 /* Readonly if protected */
-#define CSC_SOP 0x4000 /* Supervisor only if protected */
-#define CSC_RO 0x8000 /* Read-Only */
-
-#define CSD_EN 0x0001 /* Chip-Select Enable */
-#define CSD_SIZ_MASK 0x000e /* Chip-Select Size */
-#define CSD_SIZ_SHIFT 1
-#define CSD_WS_MASK 0x0070 /* Wait State */
-#define CSD_WS_SHIFT 4
-#define CSD_BSW 0x0080 /* Data Bus Width */
-#define CSD_FLASH 0x0100 /* FLASH Memory Support */
-#define CSD_DRAM 0x0200 /* Dram Selection */
-#define CSD_COMB 0x0400 /* Combining */
-#define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */
-#define CSD_UPSIZ_SHIFT 11
-#define CSD_ROP 0x2000 /* Readonly if protected */
-#define CSD_SOP 0x4000 /* Supervisor only if protected */
-#define CSD_RO 0x8000 /* Read-Only */
-
-/*
- * Emulation Chip-Select Register
- */
-#define EMUCS_ADDR 0xfffff118
-#define EMUCS WORD_REF(EMUCS_ADDR)
-
-#define EMUCS_WS_MASK 0x0070
-#define EMUCS_WS_SHIFT 4
-
-/**********
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
-
-/*
- * PLL Control Register
- */
-#define PLLCR_ADDR 0xfffff200
-#define PLLCR WORD_REF(PLLCR_ADDR)
-
-#define PLLCR_DISPLL 0x0008 /* Disable PLL */
-#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */
-#define PLLCR_PRESC 0x0020 /* VCO prescaler */
-#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */
-#define PLLCR_SYSCLK_SEL_SHIFT 8
-#define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */
-#define PLLCR_LCDCLK_SEL_SHIFT 11
-
-/* '328-compatible definitions */
-#define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK
-#define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT
-
-/*
- * PLL Frequency Select Register
- */
-#define PLLFSR_ADDR 0xfffff202
-#define PLLFSR WORD_REF(PLLFSR_ADDR)
-
-#define PLLFSR_PC_MASK 0x00ff /* P Count */
-#define PLLFSR_PC_SHIFT 0
-#define PLLFSR_QC_MASK 0x0f00 /* Q Count */
-#define PLLFSR_QC_SHIFT 8
-#define PLLFSR_PROT 0x4000 /* Protect P & Q */
-#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */
-
-/*
- * Power Control Register
- */
-#define PCTRL_ADDR 0xfffff207
-#define PCTRL BYTE_REF(PCTRL_ADDR)
-
-#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */
-#define PCTRL_WIDTH_SHIFT 0
-#define PCTRL_PCEN 0x80 /* Power Control Enable */
-
-/**********
- *
- * 0xFFFFF3xx -- Interrupt Controller
- *
- **********/
-
-/*
- * Interrupt Vector Register
- */
-#define IVR_ADDR 0xfffff300
-#define IVR BYTE_REF(IVR_ADDR)
-
-#define IVR_VECTOR_MASK 0xF8
-
-/*
- * Interrupt control Register
- */
-#define ICR_ADDR 0xfffff302
-#define ICR WORD_REF(ICR_ADDR)
-
-#define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */
-#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */
-#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */
-#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */
-#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */
-#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */
-#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */
-#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */
-#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */
-
-/*
- * Interrupt Mask Register
- */
-#define IMR_ADDR 0xfffff304
-#define IMR LONG_REF(IMR_ADDR)
-
-/*
- * Define the names for bit positions first. This is useful for
- * request_irq
- */
-#define SPI2_IRQ_NUM 0 /* SPI 2 interrupt */
-#define TMR_IRQ_NUM 1 /* Timer 1 interrupt */
-#define UART1_IRQ_NUM 2 /* UART 1 interrupt */
-#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */
-#define RTC_IRQ_NUM 4 /* RTC interrupt */
-#define TMR2_IRQ_NUM 5 /* Timer 2 interrupt */
-#define KB_IRQ_NUM 6 /* Keyboard Interrupt */
-#define PWM1_IRQ_NUM 7 /* Pulse-Width Modulator 1 int. */
-#define INT0_IRQ_NUM 8 /* External INT0 */
-#define INT1_IRQ_NUM 9 /* External INT1 */
-#define INT2_IRQ_NUM 10 /* External INT2 */
-#define INT3_IRQ_NUM 11 /* External INT3 */
-#define UART2_IRQ_NUM 12 /* UART 2 interrupt */
-#define PWM2_IRQ_NUM 13 /* Pulse-Width Modulator 1 int. */
-#define IRQ1_IRQ_NUM 16 /* IRQ1 */
-#define IRQ2_IRQ_NUM 17 /* IRQ2 */
-#define IRQ3_IRQ_NUM 18 /* IRQ3 */
-#define IRQ6_IRQ_NUM 19 /* IRQ6 */
-#define IRQ5_IRQ_NUM 20 /* IRQ5 */
-#define SPI1_IRQ_NUM 21 /* SPI 1 interrupt */
-#define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */
-#define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */
-
-#define SPI_IRQ_NUM SPI2_IRQ_NUM
-
-/* '328-compatible definitions */
-#define SPIM_IRQ_NUM SPI_IRQ_NUM
-#define TMR1_IRQ_NUM TMR_IRQ_NUM
-#define UART_IRQ_NUM UART1_IRQ_NUM
-
-/*
- * Here go the bitmasks themselves
- */
-#define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */
-#define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */
-#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
-#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
-#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */
-#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */
-#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */
-#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */
-#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */
-#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */
-#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */
-#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */
-#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */
-#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */
-#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */
-#define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */
-#define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */
-#define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IMR_MSPIM IMR_MSPI
-#define IMR_MTMR1 IMR_MTMR
-
-/*
- * Interrupt Status Register
- */
-#define ISR_ADDR 0xfffff30c
-#define ISR LONG_REF(ISR_ADDR)
-
-#define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */
-#define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */
-#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
-#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
-#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
-#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
-#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */
-#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
-#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
-#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
-#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
-#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
-#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
-#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
-#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
-#define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */
-#define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */
-#define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define ISR_SPIM ISR_SPI
-#define ISR_TMR1 ISR_TMR
-
-/*
- * Interrupt Pending Register
- */
-#define IPR_ADDR 0xfffff30c
-#define IPR LONG_REF(IPR_ADDR)
-
-#define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */
-#define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */
-#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
-#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
-#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
-#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
-#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */
-#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
-#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
-#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
-#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
-#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
-#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
-#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
-#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
-#define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */
-#define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */
-#define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IPR_SPIM IPR_SPI
-#define IPR_TMR1 IPR_TMR
-
-/**********
- *
- * 0xFFFFF4xx -- Parallel Ports
- *
- **********/
-
-/*
- * Port A
- */
-#define PADIR_ADDR 0xfffff400 /* Port A direction reg */
-#define PADATA_ADDR 0xfffff401 /* Port A data register */
-#define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */
-
-#define PADIR BYTE_REF(PADIR_ADDR)
-#define PADATA BYTE_REF(PADATA_ADDR)
-#define PAPUEN BYTE_REF(PAPUEN_ADDR)
-
-#define PA(x) (1 << (x))
-
-/*
- * Port B
- */
-#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */
-#define PBDATA_ADDR 0xfffff409 /* Port B data register */
-#define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */
-#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */
-
-#define PBDIR BYTE_REF(PBDIR_ADDR)
-#define PBDATA BYTE_REF(PBDATA_ADDR)
-#define PBPUEN BYTE_REF(PBPUEN_ADDR)
-#define PBSEL BYTE_REF(PBSEL_ADDR)
-
-#define PB(x) (1 << (x))
-
-#define PB_CSB0 0x01 /* Use CSB0 as PB[0] */
-#define PB_CSB1 0x02 /* Use CSB1 as PB[1] */
-#define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */
-#define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */
-#define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */
-#define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */
-#define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */
-#define PB_PWMO 0x80 /* Use PWMO as PB[7] */
-
-/*
- * Port C
- */
-#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */
-#define PCDATA_ADDR 0xfffff411 /* Port C data register */
-#define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */
-#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */
-
-#define PCDIR BYTE_REF(PCDIR_ADDR)
-#define PCDATA BYTE_REF(PCDATA_ADDR)
-#define PCPDEN BYTE_REF(PCPDEN_ADDR)
-#define PCSEL BYTE_REF(PCSEL_ADDR)
-
-#define PC(x) (1 << (x))
-
-#define PC_LD0 0x01 /* Use LD0 as PC[0] */
-#define PC_LD1 0x02 /* Use LD1 as PC[1] */
-#define PC_LD2 0x04 /* Use LD2 as PC[2] */
-#define PC_LD3 0x08 /* Use LD3 as PC[3] */
-#define PC_LFLM 0x10 /* Use LFLM as PC[4] */
-#define PC_LLP 0x20 /* Use LLP as PC[5] */
-#define PC_LCLK 0x40 /* Use LCLK as PC[6] */
-#define PC_LACD 0x80 /* Use LACD as PC[7] */
-
-/*
- * Port D
- */
-#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */
-#define PDDATA_ADDR 0xfffff419 /* Port D data register */
-#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */
-#define PDSEL_ADDR 0xfffff41b /* Port D Select Register */
-#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */
-#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */
-#define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */
-#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */
-
-#define PDDIR BYTE_REF(PDDIR_ADDR)
-#define PDDATA BYTE_REF(PDDATA_ADDR)
-#define PDPUEN BYTE_REF(PDPUEN_ADDR)
-#define PDSEL BYTE_REF(PDSEL_ADDR)
-#define PDPOL BYTE_REF(PDPOL_ADDR)
-#define PDIRQEN BYTE_REF(PDIRQEN_ADDR)
-#define PDKBEN BYTE_REF(PDKBEN_ADDR)
-#define PDIQEG BYTE_REF(PDIQEG_ADDR)
-
-#define PD(x) (1 << (x))
-
-#define PD_INT0 0x01 /* Use INT0 as PD[0] */
-#define PD_INT1 0x02 /* Use INT1 as PD[1] */
-#define PD_INT2 0x04 /* Use INT2 as PD[2] */
-#define PD_INT3 0x08 /* Use INT3 as PD[3] */
-#define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */
-#define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */
-#define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */
-#define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */
-
-/*
- * Port E
- */
-#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */
-#define PEDATA_ADDR 0xfffff421 /* Port E data register */
-#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */
-#define PESEL_ADDR 0xfffff423 /* Port E Select Register */
-
-#define PEDIR BYTE_REF(PEDIR_ADDR)
-#define PEDATA BYTE_REF(PEDATA_ADDR)
-#define PEPUEN BYTE_REF(PEPUEN_ADDR)
-#define PESEL BYTE_REF(PESEL_ADDR)
-
-#define PE(x) (1 << (x))
-
-#define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */
-#define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */
-#define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */
-#define PE_DWE 0x08 /* Use DWE as PE[3] */
-#define PE_RXD 0x10 /* Use RXD as PE[4] */
-#define PE_TXD 0x20 /* Use TXD as PE[5] */
-#define PE_RTS 0x40 /* Use RTS as PE[6] */
-#define PE_CTS 0x80 /* Use CTS as PE[7] */
-
-/*
- * Port F
- */
-#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */
-#define PFDATA_ADDR 0xfffff429 /* Port F data register */
-#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */
-#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */
-
-#define PFDIR BYTE_REF(PFDIR_ADDR)
-#define PFDATA BYTE_REF(PFDATA_ADDR)
-#define PFPUEN BYTE_REF(PFPUEN_ADDR)
-#define PFSEL BYTE_REF(PFSEL_ADDR)
-
-#define PF(x) (1 << (x))
-
-#define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */
-#define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */
-#define PF_CLKO 0x04 /* Use CLKO as PF[2] */
-#define PF_A20 0x08 /* Use A20 as PF[3] */
-#define PF_A21 0x10 /* Use A21 as PF[4] */
-#define PF_A22 0x20 /* Use A22 as PF[5] */
-#define PF_A23 0x40 /* Use A23 as PF[6] */
-#define PF_CSA1 0x80 /* Use CSA1 as PF[7] */
-
-/*
- * Port G
- */
-#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */
-#define PGDATA_ADDR 0xfffff431 /* Port G data register */
-#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */
-#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */
-
-#define PGDIR BYTE_REF(PGDIR_ADDR)
-#define PGDATA BYTE_REF(PGDATA_ADDR)
-#define PGPUEN BYTE_REF(PGPUEN_ADDR)
-#define PGSEL BYTE_REF(PGSEL_ADDR)
-
-#define PG(x) (1 << (x))
-
-#define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */
-#define PG_A0 0x02 /* Use A0 as PG[1] */
-#define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */
-#define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */
-#define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */
-#define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */
-
-/*
- * Port J
- */
-#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */
-#define PJDATA_ADDR 0xfffff439 /* Port J data register */
-#define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enb. reg */
-#define PJSEL_ADDR 0xfffff43B /* Port J Select Register */
-
-#define PJDIR BYTE_REF(PJDIR_ADDR)
-#define PJDATA BYTE_REF(PJDATA_ADDR)
-#define PJPUEN BYTE_REF(PJPUEN_ADDR)
-#define PJSEL BYTE_REF(PJSEL_ADDR)
-
-#define PJ(x) (1 << (x))
-
-/*
- * Port K
- */
-#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */
-#define PKDATA_ADDR 0xfffff441 /* Port K data register */
-#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enb. reg */
-#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */
-
-#define PKDIR BYTE_REF(PKDIR_ADDR)
-#define PKDATA BYTE_REF(PKDATA_ADDR)
-#define PKPUEN BYTE_REF(PKPUEN_ADDR)
-#define PKSEL BYTE_REF(PKSEL_ADDR)
-
-#define PK(x) (1 << (x))
-
-#define PK_DATAREADY 0x01 /* Use ~DATA_READY as PK[0] */
-#define PK_PWM2 0x01 /* Use PWM2 as PK[0] */
-#define PK_R_W 0x02 /* Use R/W as PK[1] */
-#define PK_LDS 0x04 /* Use /LDS as PK[2] */
-#define PK_UDS 0x08 /* Use /UDS as PK[3] */
-#define PK_LD4 0x10 /* Use LD4 as PK[4] */
-#define PK_LD5 0x20 /* Use LD5 as PK[5] */
-#define PK_LD6 0x40 /* Use LD6 as PK[6] */
-#define PK_LD7 0x80 /* Use LD7 as PK[7] */
-
-#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */
-#define PJDATA_ADDR 0xfffff439 /* Port J data register */
-#define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enable reg */
-#define PJSEL_ADDR 0xfffff43B /* Port J Select Register */
-
-#define PJDIR BYTE_REF(PJDIR_ADDR)
-#define PJDATA BYTE_REF(PJDATA_ADDR)
-#define PJPUEN BYTE_REF(PJPUEN_ADDR)
-#define PJSEL BYTE_REF(PJSEL_ADDR)
-
-#define PJ(x) (1 << (x))
-
-#define PJ_MOSI 0x01 /* Use MOSI as PJ[0] */
-#define PJ_MISO 0x02 /* Use MISO as PJ[1] */
-#define PJ_SPICLK1 0x04 /* Use SPICLK1 as PJ[2] */
-#define PJ_SS 0x08 /* Use SS as PJ[3] */
-#define PJ_RXD2 0x10 /* Use RXD2 as PJ[4] */
-#define PJ_TXD2 0x20 /* Use TXD2 as PJ[5] */
-#define PJ_RTS2 0x40 /* Use RTS2 as PJ[5] */
-#define PJ_CTS2 0x80 /* Use CTS2 as PJ[5] */
-
-/*
- * Port M
- */
-#define PMDIR_ADDR 0xfffff448 /* Port M direction reg */
-#define PMDATA_ADDR 0xfffff449 /* Port M data register */
-#define PMPUEN_ADDR 0xfffff44a /* Port M Pull-Up enable reg */
-#define PMSEL_ADDR 0xfffff44b /* Port M Select Register */
-
-#define PMDIR BYTE_REF(PMDIR_ADDR)
-#define PMDATA BYTE_REF(PMDATA_ADDR)
-#define PMPUEN BYTE_REF(PMPUEN_ADDR)
-#define PMSEL BYTE_REF(PMSEL_ADDR)
-
-#define PM(x) (1 << (x))
-
-#define PM_SDCLK 0x01 /* Use SDCLK as PM[0] */
-#define PM_SDCE 0x02 /* Use SDCE as PM[1] */
-#define PM_DQMH 0x04 /* Use DQMH as PM[2] */
-#define PM_DQML 0x08 /* Use DQML as PM[3] */
-#define PM_SDA10 0x10 /* Use SDA10 as PM[4] */
-#define PM_DMOE 0x20 /* Use DMOE as PM[5] */
-
-/**********
- *
- * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
- *
- **********/
-
-/*
- * PWM Control Register
- */
-#define PWMC_ADDR 0xfffff500
-#define PWMC WORD_REF(PWMC_ADDR)
-
-#define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */
-#define PWMC_CLKSEL_SHIFT 0
-#define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */
-#define PWMC_REPEAT_SHIFT 2
-#define PWMC_EN 0x0010 /* Enable PWM */
-#define PMNC_FIFOAV 0x0020 /* FIFO Available */
-#define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */
-#define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */
-#define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */
-#define PWMC_PRESCALER_SHIFT 8
-#define PWMC_CLKSRC 0x8000 /* Clock Source Select */
-
-/* '328-compatible definitions */
-#define PWMC_PWMEN PWMC_EN
-
-/*
- * PWM Sample Register
- */
-#define PWMS_ADDR 0xfffff502
-#define PWMS WORD_REF(PWMS_ADDR)
-
-/*
- * PWM Period Register
- */
-#define PWMP_ADDR 0xfffff504
-#define PWMP BYTE_REF(PWMP_ADDR)
-
-/*
- * PWM Counter Register
- */
-#define PWMCNT_ADDR 0xfffff505
-#define PWMCNT BYTE_REF(PWMCNT_ADDR)
-
-/**********
- *
- * 0xFFFFF6xx -- General-Purpose Timer
- *
- **********/
-
-/*
- * Timer Control register
- */
-#define TCTL_ADDR 0xfffff600
-#define TCTL WORD_REF(TCTL_ADDR)
-
-#define TCTL_TEN 0x0001 /* Timer Enable */
-#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */
-#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */
-#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */
-#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */
-#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */
-#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */
-#define TCTL_IRQEN 0x0010 /* IRQ Enable */
-#define TCTL_OM 0x0020 /* Output Mode */
-#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */
-#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */
-#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */
-#define TCTL_FRR 0x0010 /* Free-Run Mode */
-
-/* '328-compatible definitions */
-#define TCTL1_ADDR TCTL_ADDR
-#define TCTL1 TCTL
-
-/*
- * Timer Prescaler Register
- */
-#define TPRER_ADDR 0xfffff602
-#define TPRER WORD_REF(TPRER_ADDR)
-
-/* '328-compatible definitions */
-#define TPRER1_ADDR TPRER_ADDR
-#define TPRER1 TPRER
-
-/*
- * Timer Compare Register
- */
-#define TCMP_ADDR 0xfffff604
-#define TCMP WORD_REF(TCMP_ADDR)
-
-/* '328-compatible definitions */
-#define TCMP1_ADDR TCMP_ADDR
-#define TCMP1 TCMP
-
-/*
- * Timer Capture register
- */
-#define TCR_ADDR 0xfffff606
-#define TCR WORD_REF(TCR_ADDR)
-
-/* '328-compatible definitions */
-#define TCR1_ADDR TCR_ADDR
-#define TCR1 TCR
-
-/*
- * Timer Counter Register
- */
-#define TCN_ADDR 0xfffff608
-#define TCN WORD_REF(TCN_ADDR)
-
-/* '328-compatible definitions */
-#define TCN1_ADDR TCN_ADDR
-#define TCN1 TCN
-
-/*
- * Timer Status Register
- */
-#define TSTAT_ADDR 0xfffff60a
-#define TSTAT WORD_REF(TSTAT_ADDR)
-
-#define TSTAT_COMP 0x0001 /* Compare Event occurred */
-#define TSTAT_CAPT 0x0001 /* Capture Event occurred */
-
-/* '328-compatible definitions */
-#define TSTAT1_ADDR TSTAT_ADDR
-#define TSTAT1 TSTAT
-
-/**********
- *
- * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
- *
- **********/
-
-/*
- * SPIM Data Register
- */
-#define SPIMDATA_ADDR 0xfffff800
-#define SPIMDATA WORD_REF(SPIMDATA_ADDR)
-
-/*
- * SPIM Control/Status Register
- */
-#define SPIMCONT_ADDR 0xfffff802
-#define SPIMCONT WORD_REF(SPIMCONT_ADDR)
-
-#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */
-#define SPIMCONT_BIT_COUNT_SHIFT 0
-#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */
-#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */
-#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */
-#define SPIMCONT_IRQ 0x0080 /* Interrupt Request */
-#define SPIMCONT_XCH 0x0100 /* Exchange */
-#define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */
-#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */
-#define SPIMCONT_DATA_RATE_SHIFT 13
-
-/* '328-compatible definitions */
-#define SPIMCONT_SPIMIRQ SPIMCONT_IRQ
-#define SPIMCONT_SPIMEN SPIMCONT_ENABLE
-
-/**********
- *
- * 0xFFFFF9xx -- UART
- *
- **********/
-
-/*
- * UART Status/Control Register
- */
-
-#define USTCNT_ADDR 0xfffff900
-#define USTCNT WORD_REF(USTCNT_ADDR)
-
-#define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */
-#define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */
-#define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */
-#define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */
-#define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */
-#define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */
-#define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */
-#define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */
-#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */
-#define USTCNT_STOP 0x0200 /* Stop bit transmission */
-#define USTCNT_ODD 0x0400 /* Odd Parity */
-#define USTCNT_PEN 0x0800 /* Parity Enable */
-#define USTCNT_CLKM 0x1000 /* Clock Mode Select */
-#define USTCNT_TXEN 0x2000 /* Transmitter Enable */
-#define USTCNT_RXEN 0x4000 /* Receiver Enable */
-#define USTCNT_UEN 0x8000 /* UART Enable */
-
-/* '328-compatible definitions */
-#define USTCNT_TXAVAILEN USTCNT_TXAE
-#define USTCNT_TXHALFEN USTCNT_TXHE
-#define USTCNT_TXEMPTYEN USTCNT_TXEE
-#define USTCNT_RXREADYEN USTCNT_RXRE
-#define USTCNT_RXHALFEN USTCNT_RXHE
-#define USTCNT_RXFULLEN USTCNT_RXFE
-#define USTCNT_CTSDELTAEN USTCNT_CTSD
-#define USTCNT_ODD_EVEN USTCNT_ODD
-#define USTCNT_PARITYEN USTCNT_PEN
-#define USTCNT_CLKMODE USTCNT_CLKM
-#define USTCNT_UARTEN USTCNT_UEN
-
-/*
- * UART Baud Control Register
- */
-#define UBAUD_ADDR 0xfffff902
-#define UBAUD WORD_REF(UBAUD_ADDR)
-
-#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
-#define UBAUD_PRESCALER_SHIFT 0
-#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
-#define UBAUD_DIVIDE_SHIFT 8
-#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
-#define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */
-
-/*
- * UART Receiver Register
- */
-#define URX_ADDR 0xfffff904
-#define URX WORD_REF(URX_ADDR)
-
-#define URX_RXDATA_ADDR 0xfffff905
-#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR)
-
-#define URX_RXDATA_MASK 0x00ff /* Received data */
-#define URX_RXDATA_SHIFT 0
-#define URX_PARITY_ERROR 0x0100 /* Parity Error */
-#define URX_BREAK 0x0200 /* Break Detected */
-#define URX_FRAME_ERROR 0x0400 /* Framing Error */
-#define URX_OVRUN 0x0800 /* Serial Overrun */
-#define URX_OLD_DATA 0x1000 /* Old data in FIFO */
-#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */
-#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */
-#define URX_FIFO_FULL 0x8000 /* FIFO is Full */
-
-/*
- * UART Transmitter Register
- */
-#define UTX_ADDR 0xfffff906
-#define UTX WORD_REF(UTX_ADDR)
-
-#define UTX_TXDATA_ADDR 0xfffff907
-#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR)
-
-#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */
-#define UTX_TXDATA_SHIFT 0
-#define UTX_CTS_DELTA 0x0100 /* CTS changed */
-#define UTX_CTS_STAT 0x0200 /* CTS State */
-#define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */
-#define UTX_NOCTS 0x0800 /* Ignore CTS */
-#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */
-#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */
-#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */
-#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */
-
-/* '328-compatible definitions */
-#define UTX_CTS_STATUS UTX_CTS_STAT
-#define UTX_IGNORE_CTS UTX_NOCTS
-
-/*
- * UART Miscellaneous Register
- */
-#define UMISC_ADDR 0xfffff908
-#define UMISC WORD_REF(UMISC_ADDR)
-
-#define UMISC_TX_POL 0x0004 /* Transmit Polarity */
-#define UMISC_RX_POL 0x0008 /* Receive Polarity */
-#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */
-#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */
-#define UMISC_RTS 0x0040 /* Set RTS status */
-#define UMISC_RTSCONT 0x0080 /* Choose RTS control */
-#define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */
-#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */
-#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */
-#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */
-#define UMISC_CLKSRC 0x4000 /* Clock Source */
-#define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */
-
-/*
- * UART Non-integer Prescaler Register
- */
-#define NIPR_ADDR 0xfffff90a
-#define NIPR WORD_REF(NIPR_ADDR)
-
-#define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */
-#define NIPR_STEP_VALUE_SHIFT 0
-#define NIPR_SELECT_MASK 0x0700 /* Tap Selection */
-#define NIPR_SELECT_SHIFT 8
-#define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */
-
-
-/* generalization of uart control registers to support multiple ports: */
-typedef struct {
- volatile unsigned short int ustcnt;
- volatile unsigned short int ubaud;
- union {
- volatile unsigned short int w;
- struct {
- volatile unsigned char status;
- volatile unsigned char rxdata;
- } b;
- } urx;
- union {
- volatile unsigned short int w;
- struct {
- volatile unsigned char status;
- volatile unsigned char txdata;
- } b;
- } utx;
- volatile unsigned short int umisc;
- volatile unsigned short int nipr;
- volatile unsigned short int hmark;
- volatile unsigned short int unused;
-} __attribute__((packed)) m68328_uart;
-
-
-
-
-/**********
- *
- * 0xFFFFFAxx -- LCD Controller
- *
- **********/
-
-/*
- * LCD Screen Starting Address Register
- */
-#define LSSA_ADDR 0xfffffa00
-#define LSSA LONG_REF(LSSA_ADDR)
-
-#define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */
-
-/*
- * LCD Virtual Page Width Register
- */
-#define LVPW_ADDR 0xfffffa05
-#define LVPW BYTE_REF(LVPW_ADDR)
-
-/*
- * LCD Screen Width Register (not compatible with '328 !!!)
- */
-#define LXMAX_ADDR 0xfffffa08
-#define LXMAX WORD_REF(LXMAX_ADDR)
-
-#define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */
-
-/*
- * LCD Screen Height Register
- */
-#define LYMAX_ADDR 0xfffffa0a
-#define LYMAX WORD_REF(LYMAX_ADDR)
-
-#define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */
-
-/*
- * LCD Cursor X Position Register
- */
-#define LCXP_ADDR 0xfffffa18
-#define LCXP WORD_REF(LCXP_ADDR)
-
-#define LCXP_CC_MASK 0xc000 /* Cursor Control */
-#define LCXP_CC_TRAMSPARENT 0x0000
-#define LCXP_CC_BLACK 0x4000
-#define LCXP_CC_REVERSED 0x8000
-#define LCXP_CC_WHITE 0xc000
-#define LCXP_CXP_MASK 0x02ff /* Cursor X position */
-
-/*
- * LCD Cursor Y Position Register
- */
-#define LCYP_ADDR 0xfffffa1a
-#define LCYP WORD_REF(LCYP_ADDR)
-
-#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */
-
-/*
- * LCD Cursor Width and Heigth Register
- */
-#define LCWCH_ADDR 0xfffffa1c
-#define LCWCH WORD_REF(LCWCH_ADDR)
-
-#define LCWCH_CH_MASK 0x001f /* Cursor Height */
-#define LCWCH_CH_SHIFT 0
-#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */
-#define LCWCH_CW_SHIFT 8
-
-/*
- * LCD Blink Control Register
- */
-#define LBLKC_ADDR 0xfffffa1f
-#define LBLKC BYTE_REF(LBLKC_ADDR)
-
-#define LBLKC_BD_MASK 0x7f /* Blink Divisor */
-#define LBLKC_BD_SHIFT 0
-#define LBLKC_BKEN 0x80 /* Blink Enabled */
-
-/*
- * LCD Panel Interface Configuration Register
- */
-#define LPICF_ADDR 0xfffffa20
-#define LPICF BYTE_REF(LPICF_ADDR)
-
-#define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */
-#define LPICF_GS_BW 0x00
-#define LPICF_GS_GRAY_4 0x01
-#define LPICF_GS_GRAY_16 0x02
-#define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */
-#define LPICF_PBSIZ_1 0x00
-#define LPICF_PBSIZ_2 0x04
-#define LPICF_PBSIZ_4 0x08
-
-/*
- * LCD Polarity Configuration Register
- */
-#define LPOLCF_ADDR 0xfffffa21
-#define LPOLCF BYTE_REF(LPOLCF_ADDR)
-
-#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */
-#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */
-#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */
-#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */
-
-/*
- * LACD (LCD Alternate Crystal Direction) Rate Control Register
- */
-#define LACDRC_ADDR 0xfffffa23
-#define LACDRC BYTE_REF(LACDRC_ADDR)
-
-#define LACDRC_ACDSLT 0x80 /* Signal Source Select */
-#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */
-#define LACDRC_ACD_SHIFT 0
-
-/*
- * LCD Pixel Clock Divider Register
- */
-#define LPXCD_ADDR 0xfffffa25
-#define LPXCD BYTE_REF(LPXCD_ADDR)
-
-#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */
-#define LPXCD_PCD_SHIFT 0
-
-/*
- * LCD Clocking Control Register
- */
-#define LCKCON_ADDR 0xfffffa27
-#define LCKCON BYTE_REF(LCKCON_ADDR)
-
-#define LCKCON_DWS_MASK 0x0f /* Display Wait-State */
-#define LCKCON_DWS_SHIFT 0
-#define LCKCON_DWIDTH 0x40 /* Display Memory Width */
-#define LCKCON_LCDON 0x80 /* Enable LCD Controller */
-
-/* '328-compatible definitions */
-#define LCKCON_DW_MASK LCKCON_DWS_MASK
-#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
-
-/*
- * LCD Refresh Rate Adjustment Register
- */
-#define LRRA_ADDR 0xfffffa29
-#define LRRA BYTE_REF(LRRA_ADDR)
-
-/*
- * LCD Panning Offset Register
- */
-#define LPOSR_ADDR 0xfffffa2d
-#define LPOSR BYTE_REF(LPOSR_ADDR)
-
-#define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */
-#define LPOSR_POS_SHIFT 0
-
-/*
- * LCD Frame Rate Control Modulation Register
- */
-#define LFRCM_ADDR 0xfffffa31
-#define LFRCM BYTE_REF(LFRCM_ADDR)
-
-#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */
-#define LFRCM_YMOD_SHIFT 0
-#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */
-#define LFRCM_XMOD_SHIFT 4
-
-/*
- * LCD Gray Palette Mapping Register
- */
-#define LGPMR_ADDR 0xfffffa33
-#define LGPMR BYTE_REF(LGPMR_ADDR)
-
-#define LGPMR_G1_MASK 0x0f
-#define LGPMR_G1_SHIFT 0
-#define LGPMR_G2_MASK 0xf0
-#define LGPMR_G2_SHIFT 4
-
-/*
- * PWM Contrast Control Register
- */
-#define PWMR_ADDR 0xfffffa36
-#define PWMR WORD_REF(PWMR_ADDR)
-
-#define PWMR_PW_MASK 0x00ff /* Pulse Width */
-#define PWMR_PW_SHIFT 0
-#define PWMR_CCPEN 0x0100 /* Contrast Control Enable */
-#define PWMR_SRC_MASK 0x0600 /* Input Clock Source */
-#define PWMR_SRC_LINE 0x0000 /* Line Pulse */
-#define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */
-#define PWMR_SRC_LCD 0x4000 /* LCD clock */
-
-/**********
- *
- * 0xFFFFFBxx -- Real-Time Clock (RTC)
- *
- **********/
-
-/*
- * RTC Hours Minutes and Seconds Register
- */
-#define RTCTIME_ADDR 0xfffffb00
-#define RTCTIME LONG_REF(RTCTIME_ADDR)
-
-#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */
-#define RTCTIME_SECONDS_SHIFT 0
-#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */
-#define RTCTIME_MINUTES_SHIFT 16
-#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */
-#define RTCTIME_HOURS_SHIFT 24
-
-/*
- * RTC Alarm Register
- */
-#define RTCALRM_ADDR 0xfffffb04
-#define RTCALRM LONG_REF(RTCALRM_ADDR)
-
-#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */
-#define RTCALRM_SECONDS_SHIFT 0
-#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */
-#define RTCALRM_MINUTES_SHIFT 16
-#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */
-#define RTCALRM_HOURS_SHIFT 24
-
-/*
- * Watchdog Timer Register
- */
-#define WATCHDOG_ADDR 0xfffffb0a
-#define WATCHDOG WORD_REF(WATCHDOG_ADDR)
-
-#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */
-#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */
-#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */
-#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */
-#define WATCHDOG_CNT_SHIFT 8
-
-/*
- * RTC Control Register
- */
-#define RTCCTL_ADDR 0xfffffb0c
-#define RTCCTL WORD_REF(RTCCTL_ADDR)
-
-#define RTCCTL_XTL 0x0020 /* Crystal Selection */
-#define RTCCTL_EN 0x0080 /* RTC Enable */
-
-/* '328-compatible definitions */
-#define RTCCTL_384 RTCCTL_XTL
-#define RTCCTL_ENABLE RTCCTL_EN
-
-/*
- * RTC Interrupt Status Register
- */
-#define RTCISR_ADDR 0xfffffb0e
-#define RTCISR WORD_REF(RTCISR_ADDR)
-
-#define RTCISR_SW 0x0001 /* Stopwatch timed out */
-#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */
-#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */
-#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */
-#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */
-#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */
-#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */
-#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */
-#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */
-#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */
-#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */
-#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */
-#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */
-#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */
-
-/*
- * RTC Interrupt Enable Register
- */
-#define RTCIENR_ADDR 0xfffffb10
-#define RTCIENR WORD_REF(RTCIENR_ADDR)
-
-#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */
-#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */
-#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */
-#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */
-#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */
-#define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */
-#define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */
-#define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */
-#define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */
-#define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */
-#define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */
-#define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */
-#define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */
-#define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */
-
-/*
- * Stopwatch Minutes Register
- */
-#define STPWCH_ADDR 0xfffffb12
-#define STPWCH WORD_REF(STPWCH_ADDR)
-
-#define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */
-#define SPTWCH_CNT_SHIFT 0
-
-/*
- * RTC Day Count Register
- */
-#define DAYR_ADDR 0xfffffb1a
-#define DAYR WORD_REF(DAYR_ADDR)
-
-#define DAYR_DAYS_MASK 0x1ff /* Day Setting */
-#define DAYR_DAYS_SHIFT 0
-
-/*
- * RTC Day Alarm Register
- */
-#define DAYALARM_ADDR 0xfffffb1c
-#define DAYALARM WORD_REF(DAYALARM_ADDR)
-
-#define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */
-#define DAYALARM_DAYSAL_SHIFT 0
-
-/**********
- *
- * 0xFFFFFCxx -- DRAM Controller
- *
- **********/
-
-/*
- * DRAM Memory Configuration Register
- */
-#define DRAMMC_ADDR 0xfffffc00
-#define DRAMMC WORD_REF(DRAMMC_ADDR)
-
-#define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */
-#define DRAMMC_ROW12_PA10 0x0000
-#define DRAMMC_ROW12_PA21 0x4000
-#define DRAMMC_ROW12_PA23 0x8000
-#define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */
-#define DRAMMC_ROW0_PA11 0x0000
-#define DRAMMC_ROW0_PA22 0x1000
-#define DRAMMC_ROW0_PA23 0x2000
-#define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */
-#define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */
-#define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */
-#define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */
-#define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */
-#define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */
-#define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */
-#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */
-#define DRAMMC_REF_SHIFT 0
-
-/*
- * DRAM Control Register
- */
-#define DRAMC_ADDR 0xfffffc02
-#define DRAMC WORD_REF(DRAMC_ADDR)
-
-#define DRAMC_DWE 0x0001 /* DRAM Write Enable */
-#define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */
-#define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */
-#define DRAMC_SLW 0x0008 /* Slow RAM */
-#define DRAMC_LSP 0x0010 /* Light Sleep */
-#define DRAMC_MSW 0x0020 /* Slow Multiplexing */
-#define DRAMC_WS_MASK 0x00c0 /* Wait-states */
-#define DRAMC_WS_SHIFT 6
-#define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */
-#define DRAMC_PGSZ_SHIFT 8
-#define DRAMC_PGSZ_256K 0x0000
-#define DRAMC_PGSZ_512K 0x0100
-#define DRAMC_PGSZ_1024K 0x0200
-#define DRAMC_PGSZ_2048K 0x0300
-#define DRAMC_EDO 0x0400 /* EDO DRAM */
-#define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */
-#define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */
-#define DRAMC_BC_SHIFT 12
-#define DRAMC_RM 0x4000 /* Refresh Mode */
-#define DRAMC_EN 0x8000 /* DRAM Controller enable */
-
-
-/**********
- *
- * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
- *
- **********/
-
-/*
- * ICE Module Address Compare Register
- */
-#define ICEMACR_ADDR 0xfffffd00
-#define ICEMACR LONG_REF(ICEMACR_ADDR)
-
-/*
- * ICE Module Address Mask Register
- */
-#define ICEMAMR_ADDR 0xfffffd04
-#define ICEMAMR LONG_REF(ICEMAMR_ADDR)
-
-/*
- * ICE Module Control Compare Register
- */
-#define ICEMCCR_ADDR 0xfffffd08
-#define ICEMCCR WORD_REF(ICEMCCR_ADDR)
-
-#define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */
-#define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */
-
-/*
- * ICE Module Control Mask Register
- */
-#define ICEMCMR_ADDR 0xfffffd0a
-#define ICEMCMR WORD_REF(ICEMCMR_ADDR)
-
-#define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */
-#define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */
-
-/*
- * ICE Module Control Register
- */
-#define ICEMCR_ADDR 0xfffffd0c
-#define ICEMCR WORD_REF(ICEMCR_ADDR)
-
-#define ICEMCR_CEN 0x0001 /* Compare Enable */
-#define ICEMCR_PBEN 0x0002 /* Program Break Enable */
-#define ICEMCR_SB 0x0004 /* Single Breakpoint */
-#define ICEMCR_HMDIS 0x0008 /* HardMap disable */
-#define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */
-
-/*
- * ICE Module Status Register
- */
-#define ICEMSR_ADDR 0xfffffd0e
-#define ICEMSR WORD_REF(ICEMSR_ADDR)
-
-#define ICEMSR_EMUEN 0x0001 /* Emulation Enable */
-#define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */
-#define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */
-#define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */
-
-#endif /* _MC68VZ328_H_ */
+++ /dev/null
-#include <asm-m68k/a.out.h>
+++ /dev/null
-/****************************************************************************/
-
-/*
- * anchor.h -- Anchor CO-MEM Lite PCI host bridge part.
- *
- * (C) Copyright 2000, Moreton Bay (www.moreton.com.au)
- */
-
-/****************************************************************************/
-#ifndef anchor_h
-#define anchor_h
-/****************************************************************************/
-
-/*
- * Define basic addressing info.
- */
-#if defined(CONFIG_M5407C3)
-#define COMEM_BASE 0xFFFF0000 /* Base of CO-MEM address space */
-#define COMEM_IRQ 25 /* IRQ of anchor part */
-#else
-#define COMEM_BASE 0x80000000 /* Base of CO-MEM address space */
-#define COMEM_IRQ 25 /* IRQ of anchor part */
-#endif
-
-/****************************************************************************/
-
-/*
- * 4-byte registers of CO-MEM, so adjust register addresses for
- * easy access. Handy macro for word access too.
- */
-#define LREG(a) ((a) >> 2)
-#define WREG(a) ((a) >> 1)
-
-
-/*
- * Define base addresses within CO-MEM Lite register address space.
- */
-#define COMEM_I2O 0x0000 /* I2O registers */
-#define COMEM_OPREGS 0x0400 /* Operation registers */
-#define COMEM_PCIBUS 0x2000 /* Direct access to PCI bus */
-#define COMEM_SHMEM 0x4000 /* Shared memory region */
-
-#define COMEM_SHMEMSIZE 0x4000 /* Size of shared memory */
-
-
-/*
- * Define CO-MEM Registers.
- */
-#define COMEM_I2OHISR 0x0030 /* I2O host interrupt status */
-#define COMEM_I2OHIMR 0x0034 /* I2O host interrupt mask */
-#define COMEM_I2OLISR 0x0038 /* I2O local interrupt status */
-#define COMEM_I2OLIMR 0x003c /* I2O local interrupt mask */
-#define COMEM_IBFPFIFO 0x0040 /* I2O inbound free/post FIFO */
-#define COMEM_OBPFFIFO 0x0044 /* I2O outbound post/free FIFO */
-#define COMEM_IBPFFIFO 0x0048 /* I2O inbound post/free FIFO */
-#define COMEM_OBFPFIFO 0x004c /* I2O outbound free/post FIFO */
-
-#define COMEM_DAHBASE 0x0460 /* Direct access base address */
-
-#define COMEM_NVCMD 0x04a0 /* I2C serial command */
-#define COMEM_NVREAD 0x04a4 /* I2C serial read */
-#define COMEM_NVSTAT 0x04a8 /* I2C status */
-
-#define COMEM_DMALBASE 0x04b0 /* DMA local base address */
-#define COMEM_DMAHBASE 0x04b4 /* DMA host base address */
-#define COMEM_DMASIZE 0x04b8 /* DMA size */
-#define COMEM_DMACTL 0x04bc /* DMA control */
-
-#define COMEM_HCTL 0x04e0 /* Host control */
-#define COMEM_HINT 0x04e4 /* Host interrupt control/status */
-#define COMEM_HLDATA 0x04e8 /* Host to local data mailbox */
-#define COMEM_LINT 0x04f4 /* Local interrupt contole status */
-#define COMEM_LHDATA 0x04f8 /* Local to host data mailbox */
-
-#define COMEM_LBUSCFG 0x04fc /* Local bus configuration */
-
-
-/*
- * Commands and flags for use with Direct Access Register.
- */
-#define COMEM_DA_IACK 0x00000000 /* Interrupt acknowledge (read) */
-#define COMEM_DA_SPCL 0x00000010 /* Special cycle (write) */
-#define COMEM_DA_MEMRD 0x00000004 /* Memory read cycle */
-#define COMEM_DA_MEMWR 0x00000004 /* Memory write cycle */
-#define COMEM_DA_IORD 0x00000002 /* I/O read cycle */
-#define COMEM_DA_IOWR 0x00000002 /* I/O write cycle */
-#define COMEM_DA_CFGRD 0x00000006 /* Configuration read cycle */
-#define COMEM_DA_CFGWR 0x00000006 /* Configuration write cycle */
-
-#define COMEM_DA_ADDR(a) ((a) & 0xffffe000)
-
-#define COMEM_DA_OFFSET(a) ((a) & 0x00001fff)
-
-
-/*
- * The PCI bus will be limited in what slots will actually be used.
- * Define valid device numbers for different boards.
- */
-#if defined(CONFIG_M5407C3)
-#define COMEM_MINDEV 14 /* Minimum valid DEVICE */
-#define COMEM_MAXDEV 14 /* Maximum valid DEVICE */
-#define COMEM_BRIDGEDEV 15 /* Slot bridge is in */
-#else
-#define COMEM_MINDEV 0 /* Minimum valid DEVICE */
-#define COMEM_MAXDEV 3 /* Maximum valid DEVICE */
-#endif
-
-#define COMEM_MAXPCI (COMEM_MAXDEV+1) /* Maximum PCI devices */
-
-
-/****************************************************************************/
-#endif /* anchor_h */
+++ /dev/null
-#ifndef __ARCH_M68KNOMMU_ATOMIC__
-#define __ARCH_M68KNOMMU_ATOMIC__
-
-#include <asm/system.h>
-
-/*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- */
-
-/*
- * We do not have SMP m68k systems, so we don't have to deal with that.
- */
-
-typedef struct { int counter; } atomic_t;
-#define ATOMIC_INIT(i) { (i) }
-
-#define atomic_read(v) ((v)->counter)
-#define atomic_set(v, i) (((v)->counter) = i)
-
-static __inline__ void atomic_add(int i, atomic_t *v)
-{
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "d" (i));
-#else
- __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "di" (i));
-#endif
-}
-
-static __inline__ void atomic_sub(int i, atomic_t *v)
-{
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "d" (i));
-#else
- __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "di" (i));
-#endif
-}
-
-static __inline__ int atomic_sub_and_test(int i, atomic_t * v)
-{
- char c;
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__("subl %2,%1; seq %0"
- : "=d" (c), "+m" (*v)
- : "d" (i));
-#else
- __asm__ __volatile__("subl %2,%1; seq %0"
- : "=d" (c), "+m" (*v)
- : "di" (i));
-#endif
- return c != 0;
-}
-
-static __inline__ void atomic_inc(volatile atomic_t *v)
-{
- __asm__ __volatile__("addql #1,%0" : "+m" (*v));
-}
-
-/*
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-
-static __inline__ int atomic_inc_and_test(volatile atomic_t *v)
-{
- char c;
- __asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v));
- return c != 0;
-}
-
-static __inline__ void atomic_dec(volatile atomic_t *v)
-{
- __asm__ __volatile__("subql #1,%0" : "+m" (*v));
-}
-
-static __inline__ int atomic_dec_and_test(volatile atomic_t *v)
-{
- char c;
- __asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v));
- return c != 0;
-}
-
-static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v)
-{
- __asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask)));
-}
-
-static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
-{
- __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask));
-}
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-static inline int atomic_add_return(int i, atomic_t * v)
-{
- unsigned long temp, flags;
-
- local_irq_save(flags);
- temp = *(long *)v;
- temp += i;
- *(long *)v = temp;
- local_irq_restore(flags);
-
- return temp;
-}
-
-#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
-
-static inline int atomic_sub_return(int i, atomic_t * v)
-{
- unsigned long temp, flags;
-
- local_irq_save(flags);
- temp = *(long *)v;
- temp -= i;
- *(long *)v = temp;
- local_irq_restore(flags);
-
- return temp;
-}
-
-#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
-{
- int c, old;
- c = atomic_read(v);
- for (;;) {
- if (unlikely(c == (u)))
- break;
- old = atomic_cmpxchg((v), c, c + (a));
- if (likely(old == c))
- break;
- c = old;
- }
- return c != (u);
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-#define atomic_dec_return(v) atomic_sub_return(1,(v))
-#define atomic_inc_return(v) atomic_add_return(1,(v))
-
-#include <asm-generic/atomic.h>
-#endif /* __ARCH_M68KNOMMU_ATOMIC __ */
+++ /dev/null
-#ifndef __ASMm68k_AUXVEC_H
-#define __ASMm68k_AUXVEC_H
-
-#endif
+++ /dev/null
-#ifndef _M68KNOMMU_BITOPS_H
-#define _M68KNOMMU_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-#include <linux/compiler.h>
-#include <asm/byteorder.h> /* swab32 */
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#if defined (__mcfisaaplus__) || defined (__mcfisac__)
-static inline int ffs(unsigned int val)
-{
- if (!val)
- return 0;
-
- asm volatile(
- "bitrev %0\n\t"
- "ff1 %0\n\t"
- : "=d" (val)
- : "0" (val)
- );
- val++;
- return val;
-}
-
-static inline int __ffs(unsigned int val)
-{
- asm volatile(
- "bitrev %0\n\t"
- "ff1 %0\n\t"
- : "=d" (val)
- : "0" (val)
- );
- return val;
-}
-
-#else
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/__ffs.h>
-#endif
-
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/ffz.h>
-
-static __inline__ void set_bit(int nr, volatile unsigned long * addr)
-{
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)"
- : "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "d" (nr)
- : "%a0", "cc");
-#else
- __asm__ __volatile__ ("bset %1,%0"
- : "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "di" (nr)
- : "cc");
-#endif
-}
-
-#define __set_bit(nr, addr) set_bit(nr, addr)
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit() barrier()
-#define smp_mb__after_clear_bit() barrier()
-
-static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
-{
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)"
- : "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "d" (nr)
- : "%a0", "cc");
-#else
- __asm__ __volatile__ ("bclr %1,%0"
- : "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "di" (nr)
- : "cc");
-#endif
-}
-
-#define __clear_bit(nr, addr) clear_bit(nr, addr)
-
-static __inline__ void change_bit(int nr, volatile unsigned long * addr)
-{
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)"
- : "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "d" (nr)
- : "%a0", "cc");
-#else
- __asm__ __volatile__ ("bchg %1,%0"
- : "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "di" (nr)
- : "cc");
-#endif
-}
-
-#define __change_bit(nr, addr) change_bit(nr, addr)
-
-static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
-{
- char retval;
-
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "d" (nr)
- : "%a0");
-#else
- __asm__ __volatile__ ("bset %2,%1; sne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "di" (nr)
- /* No clobber */);
-#endif
-
- return retval;
-}
-
-#define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr)
-
-static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
-{
- char retval;
-
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "d" (nr)
- : "%a0");
-#else
- __asm__ __volatile__ ("bclr %2,%1; sne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "di" (nr)
- /* No clobber */);
-#endif
-
- return retval;
-}
-
-#define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr)
-
-static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
-{
- char retval;
-
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "d" (nr)
- : "%a0");
-#else
- __asm__ __volatile__ ("bchg %2,%1; sne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
- : "di" (nr)
- /* No clobber */);
-#endif
-
- return retval;
-}
-
-#define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr)
-
-/*
- * This routine doesn't need to be atomic.
- */
-static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr)
-{
- return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
-}
-
-static __inline__ int __test_bit(int nr, const volatile unsigned long * addr)
-{
- int * a = (int *) addr;
- int mask;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
- return ((mask & *a) != 0);
-}
-
-#define test_bit(nr,addr) \
-(__builtin_constant_p(nr) ? \
- __constant_test_bit((nr),(addr)) : \
- __test_bit((nr),(addr)))
-
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-
-static __inline__ int ext2_set_bit(int nr, volatile void * addr)
-{
- char retval;
-
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
- : "d" (nr)
- : "%a0");
-#else
- __asm__ __volatile__ ("bset %2,%1; sne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
- : "di" (nr)
- /* No clobber */);
-#endif
-
- return retval;
-}
-
-static __inline__ int ext2_clear_bit(int nr, volatile void * addr)
-{
- char retval;
-
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
- : "d" (nr)
- : "%a0");
-#else
- __asm__ __volatile__ ("bclr %2,%1; sne %0"
- : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
- : "di" (nr)
- /* No clobber */);
-#endif
-
- return retval;
-}
-
-#define ext2_set_bit_atomic(lock, nr, addr) \
- ({ \
- int ret; \
- spin_lock(lock); \
- ret = ext2_set_bit((nr), (addr)); \
- spin_unlock(lock); \
- ret; \
- })
-
-#define ext2_clear_bit_atomic(lock, nr, addr) \
- ({ \
- int ret; \
- spin_lock(lock); \
- ret = ext2_clear_bit((nr), (addr)); \
- spin_unlock(lock); \
- ret; \
- })
-
-static __inline__ int ext2_test_bit(int nr, const volatile void * addr)
-{
- char retval;
-
-#ifdef CONFIG_COLDFIRE
- __asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0"
- : "=d" (retval)
- : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr)
- : "%a0");
-#else
- __asm__ __volatile__ ("btst %2,%1; sne %0"
- : "=d" (retval)
- : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr)
- /* No clobber */);
-#endif
-
- return retval;
-}
-
-#define ext2_find_first_zero_bit(addr, size) \
- ext2_find_next_zero_bit((addr), (size), 0)
-
-static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
-{
- unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
- unsigned long result = offset & ~31UL;
- unsigned long tmp;
-
- if (offset >= size)
- return size;
- size -= result;
- offset &= 31UL;
- if(offset) {
- /* We hold the little endian value in tmp, but then the
- * shift is illegal. So we could keep a big endian value
- * in tmp, like this:
- *
- * tmp = __swab32(*(p++));
- * tmp |= ~0UL >> (32-offset);
- *
- * but this would decrease performance, so we change the
- * shift:
- */
- tmp = *(p++);
- tmp |= __swab32(~0UL >> (32-offset));
- if(size < 32)
- goto found_first;
- if(~tmp)
- goto found_middle;
- size -= 32;
- result += 32;
- }
- while(size & ~31UL) {
- if(~(tmp = *(p++)))
- goto found_middle;
- result += 32;
- size -= 32;
- }
- if(!size)
- return result;
- tmp = *p;
-
-found_first:
- /* tmp is little endian, so we would have to swab the shift,
- * see above. But then we have to swab tmp below for ffz, so
- * we might as well do this here.
- */
- return result + ffz(__swab32(tmp) | (~0UL << size));
-found_middle:
- return result + ffz(__swab32(tmp));
-}
-
-#define ext2_find_next_bit(addr, size, off) \
- generic_find_next_le_bit((unsigned long *)(addr), (size), (off))
-#include <asm-generic/bitops/minix.h>
-
-#endif /* __KERNEL__ */
-
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#endif /* _M68KNOMMU_BITOPS_H */
+++ /dev/null
-
-/* Nothing for m68knommu */
+++ /dev/null
-/* bootstd.h: Bootloader system call interface
- *
- * (c) 1999, Rt-Control, Inc.
- */
-
-#ifndef __BOOTSTD_H__
-#define __BOOTSTD_H__
-
-#define NR_BSC 21 /* last used bootloader system call */
-
-#define __BN_reset 0 /* reset and start the bootloader */
-#define __BN_test 1 /* tests the system call interface */
-#define __BN_exec 2 /* executes a bootloader image */
-#define __BN_exit 3 /* terminates a bootloader image */
-#define __BN_program 4 /* program FLASH from a chain */
-#define __BN_erase 5 /* erase sector(s) of FLASH */
-#define __BN_open 6
-#define __BN_write 7
-#define __BN_read 8
-#define __BN_close 9
-#define __BN_mmap 10 /* map a file descriptor into memory */
-#define __BN_munmap 11 /* remove a file to memory mapping */
-#define __BN_gethwaddr 12 /* get the hardware address of my interfaces */
-#define __BN_getserialnum 13 /* get the serial number of this board */
-#define __BN_getbenv 14 /* get a bootloader envvar */
-#define __BN_setbenv 15 /* get a bootloader envvar */
-#define __BN_setpmask 16 /* set the protection mask */
-#define __BN_readenv 17 /* read environment variables */
-#define __BN_flash_chattr_range 18
-#define __BN_flash_erase_range 19
-#define __BN_flash_write_range 20
-
-/* Calling conventions compatible to (uC)linux/68k
- * We use simmilar macros to call into the bootloader as for uClinux
- */
-
-#define __bsc_return(type, res) \
-do { \
- if ((unsigned long)(res) >= (unsigned long)(-64)) { \
- /* let errno be a function, preserve res in %d0 */ \
- int __err = -(res); \
- errno = __err; \
- res = -1; \
- } \
- return (type)(res); \
-} while (0)
-
-#define _bsc0(type,name) \
-type name(void) \
-{ \
- register long __res __asm__ ("%d0") = __BN_##name; \
- __asm__ __volatile__ ("trap #2" \
- : "=g" (__res) \
- : "0" (__res) \
- ); \
- __bsc_return(type,__res); \
-}
-
-#define _bsc1(type,name,atype,a) \
-type name(atype a) \
-{ \
- register long __res __asm__ ("%d0") = __BN_##name; \
- register long __a __asm__ ("%d1") = (long)a; \
- __asm__ __volatile__ ("trap #2" \
- : "=g" (__res) \
- : "0" (__res), "d" (__a) \
- ); \
- __bsc_return(type,__res); \
-}
-
-#define _bsc2(type,name,atype,a,btype,b) \
-type name(atype a, btype b) \
-{ \
- register long __res __asm__ ("%d0") = __BN_##name; \
- register long __a __asm__ ("%d1") = (long)a; \
- register long __b __asm__ ("%d2") = (long)b; \
- __asm__ __volatile__ ("trap #2" \
- : "=g" (__res) \
- : "0" (__res), "d" (__a), "d" (__b) \
- ); \
- __bsc_return(type,__res); \
-}
-
-#define _bsc3(type,name,atype,a,btype,b,ctype,c) \
-type name(atype a, btype b, ctype c) \
-{ \
- register long __res __asm__ ("%d0") = __BN_##name; \
- register long __a __asm__ ("%d1") = (long)a; \
- register long __b __asm__ ("%d2") = (long)b; \
- register long __c __asm__ ("%d3") = (long)c; \
- __asm__ __volatile__ ("trap #2" \
- : "=g" (__res) \
- : "0" (__res), "d" (__a), "d" (__b), \
- "d" (__c) \
- ); \
- __bsc_return(type,__res); \
-}
-
-#define _bsc4(type,name,atype,a,btype,b,ctype,c,dtype,d) \
-type name(atype a, btype b, ctype c, dtype d) \
-{ \
- register long __res __asm__ ("%d0") = __BN_##name; \
- register long __a __asm__ ("%d1") = (long)a; \
- register long __b __asm__ ("%d2") = (long)b; \
- register long __c __asm__ ("%d3") = (long)c; \
- register long __d __asm__ ("%d4") = (long)d; \
- __asm__ __volatile__ ("trap #2" \
- : "=g" (__res) \
- : "0" (__res), "d" (__a), "d" (__b), \
- "d" (__c), "d" (__d) \
- ); \
- __bsc_return(type,__res); \
-}
-
-#define _bsc5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \
-type name(atype a, btype b, ctype c, dtype d, etype e) \
-{ \
- register long __res __asm__ ("%d0") = __BN_##name; \
- register long __a __asm__ ("%d1") = (long)a; \
- register long __b __asm__ ("%d2") = (long)b; \
- register long __c __asm__ ("%d3") = (long)c; \
- register long __d __asm__ ("%d4") = (long)d; \
- register long __e __asm__ ("%d5") = (long)e; \
- __asm__ __volatile__ ("trap #2" \
- : "=g" (__res) \
- : "0" (__res), "d" (__a), "d" (__b), \
- "d" (__c), "d" (__d), "d" (__e) \
- ); \
- __bsc_return(type,__res); \
-}
-
-#endif /* __BOOTSTD_H__ */
+++ /dev/null
-#ifndef _M68KNOMMU_BUG_H
-#define _M68KNOMMU_BUG_H
-#include <asm-generic/bug.h>
-#endif
+++ /dev/null
-/*
- * include/asm-m68k/bugs.h
- *
- * Copyright (C) 1994 Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- * void check_bugs(void);
- */
-
-static void check_bugs(void)
-{
-}
+++ /dev/null
-#ifndef _M68KNOMMU_BYTEORDER_H
-#define _M68KNOMMU_BYTEORDER_H
-
-#include <linux/types.h>
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __BYTEORDER_HAS_U64__
-# define __SWAB_64_THRU_32__
-#endif
-
-#if defined (__mcfisaaplus__) || defined (__mcfisac__)
-static inline __attribute_const__ __u32 ___arch__swab32(__u32 val)
-{
- asm(
- "byterev %0"
- : "=d" (val)
- : "0" (val)
- );
- return val;
-}
-
-#define __arch__swab32(x) ___arch__swab32(x)
-#endif
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _M68KNOMMU_BYTEORDER_H */
+++ /dev/null
-#ifndef __ARCH_M68KNOMMU_CACHE_H
-#define __ARCH_M68KNOMMU_CACHE_H
-
-/* bytes per L1 cache line */
-#define L1_CACHE_BYTES 16 /* this need to be at least 1 */
-
-/* m68k-elf-gcc 2.95.2 doesn't like these */
-
-#define __cacheline_aligned
-#define ____cacheline_aligned
-
-#endif
+++ /dev/null
-#include <asm-m68k/cachectl.h>
+++ /dev/null
-#ifndef _M68KNOMMU_CACHEFLUSH_H
-#define _M68KNOMMU_CACHEFLUSH_H
-
-/*
- * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com>
- */
-#include <linux/mm.h>
-
-#define flush_cache_all() __flush_cache_all()
-#define flush_cache_mm(mm) do { } while (0)
-#define flush_cache_dup_mm(mm) do { } while (0)
-#define flush_cache_range(vma, start, end) __flush_cache_all()
-#define flush_cache_page(vma, vmaddr) do { } while (0)
-#define flush_dcache_range(start,len) __flush_cache_all()
-#define flush_dcache_page(page) do { } while (0)
-#define flush_dcache_mmap_lock(mapping) do { } while (0)
-#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-#define flush_icache_range(start,len) __flush_cache_all()
-#define flush_icache_page(vma,pg) do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
-#define flush_cache_vmap(start, end) do { } while (0)
-#define flush_cache_vunmap(start, end) do { } while (0)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
-
-static inline void __flush_cache_all(void)
-{
-#ifdef CONFIG_M5407
- /*
- * Use cpushl to push and invalidate all cache lines.
- * Gas doesn't seem to know how to generate the ColdFire
- * cpushl instruction... Oh well, bit stuff it for now.
- */
- __asm__ __volatile__ (
- "nop\n\t"
- "clrl %%d0\n\t"
- "1:\n\t"
- "movel %%d0,%%a0\n\t"
- "2:\n\t"
- ".word 0xf468\n\t"
- "addl #0x10,%%a0\n\t"
- "cmpl #0x00000800,%%a0\n\t"
- "blt 2b\n\t"
- "addql #1,%%d0\n\t"
- "cmpil #4,%%d0\n\t"
- "bne 1b\n\t"
- "movel #0xb6088500,%%d0\n\t"
- "movec %%d0,%%CACR\n\t"
- : : : "d0", "a0" );
-#endif /* CONFIG_M5407 */
-#if defined(CONFIG_M527x) || defined(CONFIG_M528x)
- __asm__ __volatile__ (
- "movel #0x81000200, %%d0\n\t"
- "movec %%d0, %%CACR\n\t"
- "nop\n\t"
- : : : "d0" );
-#endif /* CONFIG_M527x || CONFIG_M528x */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
- __asm__ __volatile__ (
- "movel #0x81000100, %%d0\n\t"
- "movec %%d0, %%CACR\n\t"
- "nop\n\t"
- : : : "d0" );
-#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
-#ifdef CONFIG_M5249
- __asm__ __volatile__ (
- "movel #0xa1000200, %%d0\n\t"
- "movec %%d0, %%CACR\n\t"
- "nop\n\t"
- : : : "d0" );
-#endif /* CONFIG_M5249 */
-#ifdef CONFIG_M532x
- __asm__ __volatile__ (
- "movel #0x81000200, %%d0\n\t"
- "movec %%d0, %%CACR\n\t"
- "nop\n\t"
- : : : "d0" );
-#endif /* CONFIG_M532x */
-}
-
-#endif /* _M68KNOMMU_CACHEFLUSH_H */
+++ /dev/null
-#ifndef _M68K_CHECKSUM_H
-#define _M68K_CHECKSUM_H
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-__wsum csum_partial_copy_nocheck(const void *src, void *dst,
- int len, __wsum sum);
-
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src,
- void *dst, int len, __wsum sum, int *csum_err);
-
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- * Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
- unsigned int tmp = (__force u32)sum;
-#ifdef CONFIG_COLDFIRE
- tmp = (tmp & 0xffff) + (tmp >> 16);
- tmp = (tmp & 0xffff) + (tmp >> 16);
- return (__force __sum16)~tmp;
-#else
- __asm__("swap %1\n\t"
- "addw %1, %0\n\t"
- "clrw %1\n\t"
- "addxw %1, %0"
- : "=&d" (sum), "=&d" (tmp)
- : "0" (sum), "1" (sum));
- return (__force __sum16)~sum;
-#endif
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- __asm__ ("addl %1,%0\n\t"
- "addxl %4,%0\n\t"
- "addxl %5,%0\n\t"
- "clrl %1\n\t"
- "addxl %1,%0"
- : "=&d" (sum), "=&d" (saddr)
- : "0" (daddr), "1" (saddr), "d" (len + proto),
- "d"(sum));
- return sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-#define _HAVE_ARCH_IPV6_CSUM
-static __inline__ __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
- __u32 len, unsigned short proto, __wsum sum)
-{
- register unsigned long tmp;
- __asm__("addl %2@,%0\n\t"
- "movel %2@(4),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %2@(8),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %2@(12),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@,%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@(4),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@(8),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@(12),%1\n\t"
- "addxl %1,%0\n\t"
- "addxl %4,%0\n\t"
- "clrl %1\n\t"
- "addxl %1,%0"
- : "=&d" (sum), "=&d" (tmp)
- : "a" (saddr), "a" (daddr), "d" (len + proto),
- "0" (sum));
-
- return csum_fold(sum);
-}
-
-#endif /* _M68K_CHECKSUM_H */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * coldfire.h -- Motorola ColdFire CPU sepecific defines
- *
- * (C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef coldfire_h
-#define coldfire_h
-/****************************************************************************/
-
-
-/*
- * Define master clock frequency. This is essentially done at config
- * time now. No point enumerating dozens of possible clock options
- * here. Also the peripheral clock (bus clock) divide ratio is set
- * at config time too.
- */
-#ifdef CONFIG_CLOCK_SET
-#define MCF_CLK CONFIG_CLOCK_FREQ
-#define MCF_BUSCLK (CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV)
-#else
-#error "Don't know what your ColdFire CPU clock frequency is??"
-#endif
-
-/*
- * Define the processor support peripherals base address.
- * This is generally setup by the boards start up code.
- */
-#define MCF_MBAR 0x10000000
-#define MCF_MBAR2 0x80000000
-#if defined(CONFIG_M520x)
-#define MCF_IPSBAR 0xFC000000
-#else
-#define MCF_IPSBAR 0x40000000
-#endif
-
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x)
-#undef MCF_MBAR
-#define MCF_MBAR MCF_IPSBAR
-#elif defined(CONFIG_M532x)
-#undef MCF_MBAR
-#define MCF_MBAR 0x00000000
-#endif
-
-/****************************************************************************/
-#endif /* coldfire_h */
+++ /dev/null
-
-/*
- * 68360 Communication Processor Module.
- * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> (mc68360) after:
- * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> (mpc8xx)
- *
- * This file contains structures and information for the communication
- * processor channels. Some CPM control and status is available
- * through the 68360 internal memory map. See include/asm/360_immap.h for details.
- * This file is not a complete map of all of the 360 QUICC's capabilities
- *
- * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
- * bytes of the DP RAM and relocates the I2C parameter area to the
- * IDMA1 space. The remaining DP RAM is available for buffer descriptors
- * or other use.
- */
-#ifndef __CPM_360__
-#define __CPM_360__
-
-
-/* CPM Command register masks: */
-#define CPM_CR_RST ((ushort)0x8000)
-#define CPM_CR_OPCODE ((ushort)0x0f00)
-#define CPM_CR_CHAN ((ushort)0x00f0)
-#define CPM_CR_FLG ((ushort)0x0001)
-
-/* CPM Command set (opcodes): */
-#define CPM_CR_INIT_TRX ((ushort)0x0000)
-#define CPM_CR_INIT_RX ((ushort)0x0001)
-#define CPM_CR_INIT_TX ((ushort)0x0002)
-#define CPM_CR_HUNT_MODE ((ushort)0x0003)
-#define CPM_CR_STOP_TX ((ushort)0x0004)
-#define CPM_CR_GRSTOP_TX ((ushort)0x0005)
-#define CPM_CR_RESTART_TX ((ushort)0x0006)
-#define CPM_CR_CLOSE_RXBD ((ushort)0x0007)
-#define CPM_CR_SET_GADDR ((ushort)0x0008)
-#define CPM_CR_GCI_TIMEOUT ((ushort)0x0009)
-#define CPM_CR_GCI_ABORT ((ushort)0x000a)
-#define CPM_CR_RESET_BCS ((ushort)0x000a)
-
-/* CPM Channel numbers. */
-#define CPM_CR_CH_SCC1 ((ushort)0x0000)
-#define CPM_CR_CH_SCC2 ((ushort)0x0004)
-#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / Timers */
-#define CPM_CR_CH_TMR ((ushort)0x0005)
-#define CPM_CR_CH_SCC3 ((ushort)0x0008)
-#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / IDMA1 */
-#define CPM_CR_CH_IDMA1 ((ushort)0x0009)
-#define CPM_CR_CH_SCC4 ((ushort)0x000c)
-#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / IDMA2 */
-#define CPM_CR_CH_IDMA2 ((ushort)0x000d)
-
-
-#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
-
-#if 1 /* mleslie: I dinna think we have any such restrictions on
- * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */
-
-/* The dual ported RAM is multi-functional. Some areas can be (and are
- * being) used for microcode. There is an area that can only be used
- * as data ram for buffer descriptors, which is all we use right now.
- * Currently the first 512 and last 256 bytes are used for microcode.
- */
-/* mleslie: The uCquicc board is using no extra microcode in DPRAM */
-#define CPM_DATAONLY_BASE ((uint)0x0000)
-#define CPM_DATAONLY_SIZE ((uint)0x0800)
-#define CPM_DP_NOSPACE ((uint)0x7fffffff)
-
-#endif
-
-
-/* Export the base address of the communication processor registers
- * and dual port ram. */
-/* extern cpm360_t *cpmp; */ /* Pointer to comm processor */
-extern QUICC *pquicc;
-uint m360_cpm_dpalloc(uint size);
-/* void *m360_cpm_hostalloc(uint size); */
-void m360_cpm_setbrg(uint brg, uint rate);
-
-#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h */
-/* Buffer descriptors used by many of the CPM protocols. */
-typedef struct cpm_buf_desc {
- ushort cbd_sc; /* Status and Control */
- ushort cbd_datlen; /* Data length in buffer */
- uint cbd_bufaddr; /* Buffer address in host memory */
-} cbd_t;
-#endif
-
-
-/* rx bd status/control bits */
-#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */
-#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor in table */
-#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
-#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame OR control char */
-
-#define BD_SC_FIRST ((ushort)0x0400) /* 1st buffer in an HDLC frame */
-#define BD_SC_ADDR ((ushort)0x0400) /* 1st byte is a multidrop address */
-
-#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
-#define BD_SC_ID ((ushort)0x0100) /* Received too many idles */
-
-#define BD_SC_AM ((ushort)0x0080) /* Multidrop address match */
-#define BD_SC_DE ((ushort)0x0080) /* DPLL Error (HDLC) */
-
-#define BD_SC_BR ((ushort)0x0020) /* Break received */
-#define BD_SC_LG ((ushort)0x0020) /* Frame length violation (HDLC) */
-
-#define BD_SC_FR ((ushort)0x0010) /* Framing error */
-#define BD_SC_NO ((ushort)0x0010) /* Nonoctet aligned frame (HDLC) */
-
-#define BD_SC_PR ((ushort)0x0008) /* Parity error */
-#define BD_SC_AB ((ushort)0x0008) /* Received abort Sequence (HDLC) */
-
-#define BD_SC_OV ((ushort)0x0002) /* Overrun */
-#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */
-
-/* tx bd status/control bits (as differ from rx bd) */
-#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
-#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */
-#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
-#define BD_SC_UN ((ushort)0x0002) /* Underrun */
-
-
-
-
-/* Parameter RAM offsets. */
-
-
-
-/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM.
- * In 2.0, we use a more structured C struct map of DPRAM, and so
- * instead, we need only a parameter ram `slot' */
-
-#define PRSLOT_SCC1 0
-#define PRSLOT_SCC2 1
-#define PRSLOT_SCC3 2
-#define PRSLOT_SMC1 2
-#define PRSLOT_SCC4 3
-#define PRSLOT_SMC2 3
-
-
-/* #define PROFF_SCC1 ((uint)0x0000) */
-/* #define PROFF_SCC2 ((uint)0x0100) */
-/* #define PROFF_SCC3 ((uint)0x0200) */
-/* #define PROFF_SMC1 ((uint)0x0280) */
-/* #define PROFF_SCC4 ((uint)0x0300) */
-/* #define PROFF_SMC2 ((uint)0x0380) */
-
-
-/* Define enough so I can at least use the serial port as a UART.
- * The MBX uses SMC1 as the host serial port.
- */
-typedef struct smc_uart {
- ushort smc_rbase; /* Rx Buffer descriptor base address */
- ushort smc_tbase; /* Tx Buffer descriptor base address */
- u_char smc_rfcr; /* Rx function code */
- u_char smc_tfcr; /* Tx function code */
- ushort smc_mrblr; /* Max receive buffer length */
- uint smc_rstate; /* Internal */
- uint smc_idp; /* Internal */
- ushort smc_rbptr; /* Internal */
- ushort smc_ibc; /* Internal */
- uint smc_rxtmp; /* Internal */
- uint smc_tstate; /* Internal */
- uint smc_tdp; /* Internal */
- ushort smc_tbptr; /* Internal */
- ushort smc_tbc; /* Internal */
- uint smc_txtmp; /* Internal */
- ushort smc_maxidl; /* Maximum idle characters */
- ushort smc_tmpidl; /* Temporary idle counter */
- ushort smc_brklen; /* Last received break length */
- ushort smc_brkec; /* rcv'd break condition counter */
- ushort smc_brkcr; /* xmt break count register */
- ushort smc_rmask; /* Temporary bit mask */
-} smc_uart_t;
-
-/* Function code bits.
-*/
-#define SMC_EB ((u_char)0x10) /* Set big endian byte order */
-
-/* SMC uart mode register.
-*/
-#define SMCMR_REN ((ushort)0x0001)
-#define SMCMR_TEN ((ushort)0x0002)
-#define SMCMR_DM ((ushort)0x000c)
-#define SMCMR_SM_GCI ((ushort)0x0000)
-#define SMCMR_SM_UART ((ushort)0x0020)
-#define SMCMR_SM_TRANS ((ushort)0x0030)
-#define SMCMR_SM_MASK ((ushort)0x0030)
-#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
-#define SMCMR_REVD SMCMR_PM_EVEN
-#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
-#define SMCMR_BS SMCMR_PEN
-#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
-#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
-#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
-
-/* SMC2 as Centronics parallel printer. It is half duplex, in that
- * it can only receive or transmit. The parameter ram values for
- * each direction are either unique or properly overlap, so we can
- * include them in one structure.
- */
-typedef struct smc_centronics {
- ushort scent_rbase;
- ushort scent_tbase;
- u_char scent_cfcr;
- u_char scent_smask;
- ushort scent_mrblr;
- uint scent_rstate;
- uint scent_r_ptr;
- ushort scent_rbptr;
- ushort scent_r_cnt;
- uint scent_rtemp;
- uint scent_tstate;
- uint scent_t_ptr;
- ushort scent_tbptr;
- ushort scent_t_cnt;
- uint scent_ttemp;
- ushort scent_max_sl;
- ushort scent_sl_cnt;
- ushort scent_character1;
- ushort scent_character2;
- ushort scent_character3;
- ushort scent_character4;
- ushort scent_character5;
- ushort scent_character6;
- ushort scent_character7;
- ushort scent_character8;
- ushort scent_rccm;
- ushort scent_rccr;
-} smc_cent_t;
-
-/* Centronics Status Mask Register.
-*/
-#define SMC_CENT_F ((u_char)0x08)
-#define SMC_CENT_PE ((u_char)0x04)
-#define SMC_CENT_S ((u_char)0x02)
-
-/* SMC Event and Mask register.
-*/
-#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
-#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
-#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */
-#define SMCM_BSY ((unsigned char)0x04)
-#define SMCM_TX ((unsigned char)0x02)
-#define SMCM_RX ((unsigned char)0x01)
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST ((uint)0x00020000)
-#define CPM_BRG_EN ((uint)0x00010000)
-#define CPM_BRG_EXTC_INT ((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000)
-#define CPM_BRG_ATB ((uint)0x00002000)
-#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
-#define CPM_BRG_DIV16 ((uint)0x00000001)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP ((uint)0x00040000)
-#define SCC_GSMRH_GDE ((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
-#define SCC_GSMRH_REVD ((uint)0x00002000)
-#define SCC_GSMRH_TRX ((uint)0x00001000)
-#define SCC_GSMRH_TTX ((uint)0x00000800)
-#define SCC_GSMRH_CDP ((uint)0x00000400)
-#define SCC_GSMRH_CTSP ((uint)0x00000200)
-#define SCC_GSMRH_CDS ((uint)0x00000100)
-#define SCC_GSMRH_CTSS ((uint)0x00000080)
-#define SCC_GSMRH_TFL ((uint)0x00000040)
-#define SCC_GSMRH_RFW ((uint)0x00000020)
-#define SCC_GSMRH_TXSY ((uint)0x00000010)
-#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
-#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
-#define SCC_GSMRH_RTSM ((uint)0x00000002)
-#define SCC_GSMRH_RSYN ((uint)0x00000001)
-
-#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
-#define SCC_GSMRL_TCI ((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
-#define SCC_GSMRL_RINV ((uint)0x02000000)
-#define SCC_GSMRL_TINV ((uint)0x01000000)
-#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
-#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
-#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
-#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
-#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
-#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
-#define SCC_GSMRL_TEND ((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
-#define SCC_GSMRL_ENR ((uint)0x00000020)
-#define SCC_GSMRL_ENT ((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
-#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
-
-#define SCC_TODR_TOD ((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define SCCM_TXE ((unsigned char)0x10)
-#define SCCM_BSY ((unsigned char)0x04)
-#define SCCM_TX ((unsigned char)0x02)
-#define SCCM_RX ((unsigned char)0x01)
-
-typedef struct scc_param {
- ushort scc_rbase; /* Rx Buffer descriptor base address */
- ushort scc_tbase; /* Tx Buffer descriptor base address */
- u_char scc_rfcr; /* Rx function code */
- u_char scc_tfcr; /* Tx function code */
- ushort scc_mrblr; /* Max receive buffer length */
- uint scc_rstate; /* Internal */
- uint scc_idp; /* Internal */
- ushort scc_rbptr; /* Internal */
- ushort scc_ibc; /* Internal */
- uint scc_rxtmp; /* Internal */
- uint scc_tstate; /* Internal */
- uint scc_tdp; /* Internal */
- ushort scc_tbptr; /* Internal */
- ushort scc_tbc; /* Internal */
- uint scc_txtmp; /* Internal */
- uint scc_rcrc; /* Internal */
- uint scc_tcrc; /* Internal */
-} sccp_t;
-
-
-/* Function code bits.
- */
-#define SCC_EB ((u_char)0x10) /* Set big endian byte order */
-#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */
-
-/* CPM Ethernet through SCC1.
- */
-typedef struct scc_enet {
- sccp_t sen_genscc;
- uint sen_cpres; /* Preset CRC */
- uint sen_cmask; /* Constant mask for CRC */
- uint sen_crcec; /* CRC Error counter */
- uint sen_alec; /* alignment error counter */
- uint sen_disfc; /* discard frame counter */
- ushort sen_pads; /* Tx short frame pad character */
- ushort sen_retlim; /* Retry limit threshold */
- ushort sen_retcnt; /* Retry limit counter */
- ushort sen_maxflr; /* maximum frame length register */
- ushort sen_minflr; /* minimum frame length register */
- ushort sen_maxd1; /* maximum DMA1 length */
- ushort sen_maxd2; /* maximum DMA2 length */
- ushort sen_maxd; /* Rx max DMA */
- ushort sen_dmacnt; /* Rx DMA counter */
- ushort sen_maxb; /* Max BD byte count */
- ushort sen_gaddr1; /* Group address filter */
- ushort sen_gaddr2;
- ushort sen_gaddr3;
- ushort sen_gaddr4;
- uint sen_tbuf0data0; /* Save area 0 - current frame */
- uint sen_tbuf0data1; /* Save area 1 - current frame */
- uint sen_tbuf0rba; /* Internal */
- uint sen_tbuf0crc; /* Internal */
- ushort sen_tbuf0bcnt; /* Internal */
- ushort sen_paddrh; /* physical address (MSB) */
- ushort sen_paddrm;
- ushort sen_paddrl; /* physical address (LSB) */
- ushort sen_pper; /* persistence */
- ushort sen_rfbdptr; /* Rx first BD pointer */
- ushort sen_tfbdptr; /* Tx first BD pointer */
- ushort sen_tlbdptr; /* Tx last BD pointer */
- uint sen_tbuf1data0; /* Save area 0 - current frame */
- uint sen_tbuf1data1; /* Save area 1 - current frame */
- uint sen_tbuf1rba; /* Internal */
- uint sen_tbuf1crc; /* Internal */
- ushort sen_tbuf1bcnt; /* Internal */
- ushort sen_txlen; /* Tx Frame length counter */
- ushort sen_iaddr1; /* Individual address filter */
- ushort sen_iaddr2;
- ushort sen_iaddr3;
- ushort sen_iaddr4;
- ushort sen_boffcnt; /* Backoff counter */
-
- /* NOTE: Some versions of the manual have the following items
- * incorrectly documented. Below is the proper order.
- */
- ushort sen_taddrh; /* temp address (MSB) */
- ushort sen_taddrm;
- ushort sen_taddrl; /* temp address (LSB) */
-} scc_enet_t;
-
-
-
-#if defined (CONFIG_UCQUICC)
-/* uCquicc has the following signals connected to Ethernet:
- * 68360 - lxt905
- * PA0/RXD1 - rxd
- * PA1/TXD1 - txd
- * PA8/CLK1 - tclk
- * PA9/CLK2 - rclk
- * PC0/!RTS1 - t_en
- * PC1/!CTS1 - col
- * PC5/!CD1 - cd
- */
-#define PA_ENET_RXD PA_RXD1
-#define PA_ENET_TXD PA_TXD1
-#define PA_ENET_TCLK PA_CLK1
-#define PA_ENET_RCLK PA_CLK2
-#define PC_ENET_TENA PC_RTS1
-#define PC_ENET_CLSN PC_CTS1
-#define PC_ENET_RENA PC_CD1
-
-/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
- * SCC1.
- */
-#define SICR_ENET_MASK ((uint)0x000000ff)
-#define SICR_ENET_CLKRT ((uint)0x0000002c)
-
-#endif /* config_ucquicc */
-
-
-#ifdef MBX
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use. The TCLK and RCLK seem unique
- * to the MBX860 board. Any two of the four available clocks could be
- * used, and the MPC860 cookbook manual has an example using different
- * clock pins.
- */
-#define PA_ENET_RXD ((ushort)0x0001)
-#define PA_ENET_TXD ((ushort)0x0002)
-#define PA_ENET_TCLK ((ushort)0x0200)
-#define PA_ENET_RCLK ((ushort)0x0800)
-#define PC_ENET_TENA ((ushort)0x0001)
-#define PC_ENET_CLSN ((ushort)0x0010)
-#define PC_ENET_RENA ((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK ((uint)0x000000ff)
-#define SICR_ENET_CLKRT ((uint)0x0000003d)
-#endif
-
-#ifdef CONFIG_RPXLITE
-/* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of
- * this may be unique to the RPX-Lite configuration.
- * Note TENA is on Port B.
- */
-#define PA_ENET_RXD ((ushort)0x0004)
-#define PA_ENET_TXD ((ushort)0x0008)
-#define PA_ENET_TCLK ((ushort)0x0200)
-#define PA_ENET_RCLK ((ushort)0x0800)
-#define PB_ENET_TENA ((uint)0x00002000)
-#define PC_ENET_CLSN ((ushort)0x0040)
-#define PC_ENET_RENA ((ushort)0x0080)
-
-#define SICR_ENET_MASK ((uint)0x0000ff00)
-#define SICR_ENET_CLKRT ((uint)0x00003d00)
-#endif
-
-#ifdef CONFIG_BSEIP
-/* This ENET stuff is for the MPC823 with ethernet on SCC2.
- * This is unique to the BSE ip-Engine board.
- */
-#define PA_ENET_RXD ((ushort)0x0004)
-#define PA_ENET_TXD ((ushort)0x0008)
-#define PA_ENET_TCLK ((ushort)0x0100)
-#define PA_ENET_RCLK ((ushort)0x0200)
-#define PB_ENET_TENA ((uint)0x00002000)
-#define PC_ENET_CLSN ((ushort)0x0040)
-#define PC_ENET_RENA ((ushort)0x0080)
-
-/* BSE uses port B and C bits for PHY control also.
-*/
-#define PB_BSE_POWERUP ((uint)0x00000004)
-#define PB_BSE_FDXDIS ((uint)0x00008000)
-#define PC_BSE_LOOPBACK ((ushort)0x0800)
-
-#define SICR_ENET_MASK ((uint)0x0000ff00)
-#define SICR_ENET_CLKRT ((uint)0x00002c00)
-#endif
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
-#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
-#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
-#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
-#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
-#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
-
-/* SCC Mode Register (PMSR) as used by Ethernet.
-*/
-#define SCC_PMSR_HBC ((ushort)0x8000) /* Enable heartbeat */
-#define SCC_PMSR_FC ((ushort)0x4000) /* Force collision */
-#define SCC_PMSR_RSH ((ushort)0x2000) /* Receive short frames */
-#define SCC_PMSR_IAM ((ushort)0x1000) /* Check individual hash */
-#define SCC_PMSR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
-#define SCC_PMSR_PRO ((ushort)0x0200) /* Promiscuous mode */
-#define SCC_PMSR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
-#define SCC_PMSR_SBT ((ushort)0x0080) /* Special backoff timer */
-#define SCC_PMSR_LPB ((ushort)0x0040) /* Set Loopback mode */
-#define SCC_PMSR_SIP ((ushort)0x0020) /* Sample Input Pins */
-#define SCC_PMSR_LCW ((ushort)0x0010) /* Late collision window */
-#define SCC_PMSR_NIB22 ((ushort)0x000a) /* Start frame search */
-#define SCC_PMSR_FDE ((ushort)0x0001) /* Full duplex enable */
-
-/* Buffer descriptor control/status used by Ethernet receive.
-*/
-#define BD_ENET_RX_EMPTY ((ushort)0x8000)
-#define BD_ENET_RX_WRAP ((ushort)0x2000)
-#define BD_ENET_RX_INTR ((ushort)0x1000)
-#define BD_ENET_RX_LAST ((ushort)0x0800)
-#define BD_ENET_RX_FIRST ((ushort)0x0400)
-#define BD_ENET_RX_MISS ((ushort)0x0100)
-#define BD_ENET_RX_LG ((ushort)0x0020)
-#define BD_ENET_RX_NO ((ushort)0x0010)
-#define BD_ENET_RX_SH ((ushort)0x0008)
-#define BD_ENET_RX_CR ((ushort)0x0004)
-#define BD_ENET_RX_OV ((ushort)0x0002)
-#define BD_ENET_RX_CL ((ushort)0x0001)
-#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
-*/
-#define BD_ENET_TX_READY ((ushort)0x8000)
-#define BD_ENET_TX_PAD ((ushort)0x4000)
-#define BD_ENET_TX_WRAP ((ushort)0x2000)
-#define BD_ENET_TX_INTR ((ushort)0x1000)
-#define BD_ENET_TX_LAST ((ushort)0x0800)
-#define BD_ENET_TX_TC ((ushort)0x0400)
-#define BD_ENET_TX_DEF ((ushort)0x0200)
-#define BD_ENET_TX_HB ((ushort)0x0100)
-#define BD_ENET_TX_LC ((ushort)0x0080)
-#define BD_ENET_TX_RL ((ushort)0x0040)
-#define BD_ENET_TX_RCMASK ((ushort)0x003c)
-#define BD_ENET_TX_UN ((ushort)0x0002)
-#define BD_ENET_TX_CSL ((ushort)0x0001)
-#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
- sccp_t scc_genscc;
- uint scc_res1; /* Reserved */
- uint scc_res2; /* Reserved */
- ushort scc_maxidl; /* Maximum idle chars */
- ushort scc_idlc; /* temp idle counter */
- ushort scc_brkcr; /* Break count register */
- ushort scc_parec; /* receive parity error counter */
- ushort scc_frmec; /* receive framing error counter */
- ushort scc_nosec; /* receive noise counter */
- ushort scc_brkec; /* receive break condition counter */
- ushort scc_brkln; /* last received break length */
- ushort scc_uaddr1; /* UART address character 1 */
- ushort scc_uaddr2; /* UART address character 2 */
- ushort scc_rtemp; /* Temp storage */
- ushort scc_toseq; /* Transmit out of sequence char */
- ushort scc_char1; /* control character 1 */
- ushort scc_char2; /* control character 2 */
- ushort scc_char3; /* control character 3 */
- ushort scc_char4; /* control character 4 */
- ushort scc_char5; /* control character 5 */
- ushort scc_char6; /* control character 6 */
- ushort scc_char7; /* control character 7 */
- ushort scc_char8; /* control character 8 */
- ushort scc_rccm; /* receive control character mask */
- ushort scc_rccr; /* receive control character register */
- ushort scc_rlbc; /* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR ((ushort)0x1000)
-#define UART_SCCM_GLT ((ushort)0x0800)
-#define UART_SCCM_AB ((ushort)0x0200)
-#define UART_SCCM_IDL ((ushort)0x0100)
-#define UART_SCCM_GRA ((ushort)0x0080)
-#define UART_SCCM_BRKE ((ushort)0x0040)
-#define UART_SCCM_BRKS ((ushort)0x0020)
-#define UART_SCCM_CCR ((ushort)0x0008)
-#define UART_SCCM_BSY ((ushort)0x0004)
-#define UART_SCCM_TX ((ushort)0x0002)
-#define UART_SCCM_RX ((ushort)0x0001)
-
-/* The SCC PMSR when used as a UART.
-*/
-#define SCU_PMSR_FLC ((ushort)0x8000)
-#define SCU_PMSR_SL ((ushort)0x4000)
-#define SCU_PMSR_CL ((ushort)0x3000)
-#define SCU_PMSR_UM ((ushort)0x0c00)
-#define SCU_PMSR_FRZ ((ushort)0x0200)
-#define SCU_PMSR_RZS ((ushort)0x0100)
-#define SCU_PMSR_SYN ((ushort)0x0080)
-#define SCU_PMSR_DRT ((ushort)0x0040)
-#define SCU_PMSR_PEN ((ushort)0x0010)
-#define SCU_PMSR_RPM ((ushort)0x000c)
-#define SCU_PMSR_REVP ((ushort)0x0008)
-#define SCU_PMSR_TPM ((ushort)0x0003)
-#define SCU_PMSR_TEVP ((ushort)0x0003)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
- sccp_t st_genscc;
- uint st_cpres; /* Preset CRC */
- uint st_cmask; /* Constant mask for CRC */
-} scc_trans_t;
-
-#define BD_SCC_TX_LAST ((ushort)0x0800)
-
-
-
-/* CPM interrupts. There are nearly 32 interrupts generated by CPM
- * channels or devices. All of these are presented to the PPC core
- * as a single interrupt. The CPM interrupt handler dispatches its
- * own handlers, in a similar fashion to the PPC core handler. We
- * use the table as defined in the manuals (i.e. no special high
- * priority and SCC1 == SCCa, etc...).
- */
-/* #define CPMVEC_NR 32 */
-/* #define CPMVEC_PIO_PC15 ((ushort)0x1f) */
-/* #define CPMVEC_SCC1 ((ushort)0x1e) */
-/* #define CPMVEC_SCC2 ((ushort)0x1d) */
-/* #define CPMVEC_SCC3 ((ushort)0x1c) */
-/* #define CPMVEC_SCC4 ((ushort)0x1b) */
-/* #define CPMVEC_PIO_PC14 ((ushort)0x1a) */
-/* #define CPMVEC_TIMER1 ((ushort)0x19) */
-/* #define CPMVEC_PIO_PC13 ((ushort)0x18) */
-/* #define CPMVEC_PIO_PC12 ((ushort)0x17) */
-/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */
-/* #define CPMVEC_IDMA1 ((ushort)0x15) */
-/* #define CPMVEC_IDMA2 ((ushort)0x14) */
-/* #define CPMVEC_TIMER2 ((ushort)0x12) */
-/* #define CPMVEC_RISCTIMER ((ushort)0x11) */
-/* #define CPMVEC_I2C ((ushort)0x10) */
-/* #define CPMVEC_PIO_PC11 ((ushort)0x0f) */
-/* #define CPMVEC_PIO_PC10 ((ushort)0x0e) */
-/* #define CPMVEC_TIMER3 ((ushort)0x0c) */
-/* #define CPMVEC_PIO_PC9 ((ushort)0x0b) */
-/* #define CPMVEC_PIO_PC8 ((ushort)0x0a) */
-/* #define CPMVEC_PIO_PC7 ((ushort)0x09) */
-/* #define CPMVEC_TIMER4 ((ushort)0x07) */
-/* #define CPMVEC_PIO_PC6 ((ushort)0x06) */
-/* #define CPMVEC_SPI ((ushort)0x05) */
-/* #define CPMVEC_SMC1 ((ushort)0x04) */
-/* #define CPMVEC_SMC2 ((ushort)0x03) */
-/* #define CPMVEC_PIO_PC5 ((ushort)0x02) */
-/* #define CPMVEC_PIO_PC4 ((ushort)0x01) */
-/* #define CPMVEC_ERROR ((ushort)0x00) */
-
-extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
-
-/* CPM interrupt configuration vector.
-*/
-#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
-#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
-#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
-#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
-#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
-#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
-#define CICR_IEN ((uint)0x00000080) /* Int. enable */
-#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
-#endif /* __CPM_360__ */
+++ /dev/null
-#ifndef __M68KNOMMU_CPUTIME_H
-#define __M68KNOMMU_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __M68KNOMMU_CPUTIME_H */
+++ /dev/null
-#ifndef _M68KNOMMU_CURRENT_H
-#define _M68KNOMMU_CURRENT_H
-/*
- * current.h
- * (C) Copyright 2000, Lineo, David McCullough <davidm@uclinux.org>
- * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- *
- * rather than dedicate a register (as the m68k source does), we
- * just keep a global, we should probably just change it all to be
- * current and lose _current_task.
- */
-
-#include <linux/thread_info.h>
-
-struct task_struct;
-
-static inline struct task_struct *get_current(void)
-{
- return(current_thread_info()->task);
-}
-
-#define current get_current()
-
-#endif /* _M68KNOMMU_CURRENT_H */
+++ /dev/null
-#define DEBUG 1
-#ifdef CONFIG_COLDFIRE
-#define BREAK asm volatile ("halt")
-#else
-#define BREAK *(volatile unsigned char *)0xdeadbee0 = 0
-#endif
+++ /dev/null
-#ifndef _M68KNOMMU_DELAY_H
-#define _M68KNOMMU_DELAY_H
-
-/*
- * Copyright (C) 1994 Hamish Macdonald
- * Copyright (C) 2004 Greg Ungerer <gerg@snapgear.com>
- */
-
-#include <asm/param.h>
-
-static inline void __delay(unsigned long loops)
-{
-#if defined(CONFIG_COLDFIRE)
- /* The coldfire runs this loop at significantly different speeds
- * depending upon long word alignment or not. We'll pad it to
- * long word alignment which is the faster version.
- * The 0x4a8e is of course a 'tstl %fp' instruction. This is better
- * than using a NOP (0x4e71) instruction because it executes in one
- * cycle not three and doesn't allow for an arbitary delay waiting
- * for bus cycles to finish. Also fp/a6 isn't likely to cause a
- * stall waiting for the register to become valid if such is added
- * to the coldfire at some stage.
- */
- __asm__ __volatile__ ( ".balignw 4, 0x4a8e\n\t"
- "1: subql #1, %0\n\t"
- "jcc 1b"
- : "=d" (loops) : "0" (loops));
-#else
- __asm__ __volatile__ ( "1: subql #1, %0\n\t"
- "jcc 1b"
- : "=d" (loops) : "0" (loops));
-#endif
-}
-
-/*
- * Ideally we use a 32*32->64 multiply to calculate the number of
- * loop iterations, but the older standard 68k and ColdFire do not
- * have this instruction. So for them we have a clsoe approximation
- * loop using 32*32->32 multiplies only. This calculation based on
- * the ARM version of delay.
- *
- * We want to implement:
- *
- * loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32
- */
-
-#define HZSCALE (268435456 / (1000000/HZ))
-
-extern unsigned long loops_per_jiffy;
-
-static inline void _udelay(unsigned long usecs)
-{
-#if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \
- defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \
- defined(CONFIG_COLDFIRE)
- __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
-#else
- unsigned long tmp;
-
- usecs *= 4295; /* 2**32 / 1000000 */
- __asm__ ("mulul %2,%0:%1"
- : "=d" (usecs), "=d" (tmp)
- : "d" (usecs), "1" (loops_per_jiffy*HZ));
- __delay(usecs);
-#endif
-}
-
-/*
- * Moved the udelay() function into library code, no longer inlined.
- * I had to change the algorithm because we are overflowing now on
- * the faster ColdFire parts. The code is a little bigger, so it makes
- * sense to library it.
- */
-extern void udelay(unsigned long usecs);
-
-#endif /* defined(_M68KNOMMU_DELAY_H) */
+++ /dev/null
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
+++ /dev/null
-#include <asm-generic/div64.h>
+++ /dev/null
-#ifndef _M68KNOMMU_DMA_MAPPING_H
-#define _M68KNOMMU_DMA_MAPPING_H
-
-#ifdef CONFIG_PCI
-#include <asm-generic/dma-mapping.h>
-#else
-#include <asm-generic/dma-mapping-broken.h>
-#endif
-
-#endif /* _M68KNOMMU_DMA_MAPPING_H */
+++ /dev/null
-#ifndef _M68K_DMA_H
-#define _M68K_DMA_H 1
-
-//#define DMA_DEBUG 1
-
-
-#ifdef CONFIG_COLDFIRE
-/*
- * ColdFire DMA Model:
- * ColdFire DMA supports two forms of DMA: Single and Dual address. Single
- * address mode emits a source address, and expects that the device will either
- * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
- * the device will place data on the correct byte(s) of the data bus, as the
- * memory transactions are always 32 bits. This implies that only 32 bit
- * devices will find single mode transfers useful. Dual address DMA mode
- * performs two cycles: source read and destination write. ColdFire will
- * align the data so that the device will always get the correct bytes, thus
- * is useful for 8 and 16 bit devices. This is the mode that is supported
- * below.
- *
- * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000
- * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
- * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * APR/18/2002 : added proper support for MCF5272 DMA controller.
- * Arthur Shipkowski (art@videon-central.com)
- */
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
-
-/*
- * Set number of channels of DMA on ColdFire for different implementations.
- */
-#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
- defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-#define MAX_M68K_DMA_CHANNELS 4
-#elif defined(CONFIG_M5272)
-#define MAX_M68K_DMA_CHANNELS 1
-#elif defined(CONFIG_M532x)
-#define MAX_M68K_DMA_CHANNELS 0
-#else
-#define MAX_M68K_DMA_CHANNELS 2
-#endif
-
-extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
-extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
-
-#if !defined(CONFIG_M5272)
-#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */
-#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */
-#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */
-#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ 0
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE 1
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD 2
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD 3
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG 4
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG 5
-/* I/O to memory, 8 bits, single-address-mode */
-#define DMA_MODE_READ_SINGLE 8
-/* memory to I/O, 8 bits, single-address-mode */
-#define DMA_MODE_WRITE_SINGLE 9
-/* I/O to memory, 16 bits, single-address-mode */
-#define DMA_MODE_READ_WORD_SINGLE 10
-/* memory to I/O, 16 bits, single-address-mode */
-#define DMA_MODE_WRITE_WORD_SINGLE 11
-/* I/O to memory, 32 bits, single-address-mode */
-#define DMA_MODE_READ_LONG_SINGLE 12
-/* memory to I/O, 32 bits, single-address-mode */
-#define DMA_MODE_WRITE_LONG_SINGLE 13
-
-#else /* CONFIG_M5272 is defined */
-
-/* Source static-address mode */
-#define DMA_MODE_SRC_SA_BIT 0x01
-/* Two bits to select between all four modes */
-#define DMA_MODE_SSIZE_MASK 0x06
-/* Offset to shift bits in */
-#define DMA_MODE_SSIZE_OFF 0x01
-/* Destination static-address mode */
-#define DMA_MODE_DES_SA_BIT 0x10
-/* Two bits to select between all four modes */
-#define DMA_MODE_DSIZE_MASK 0x60
-/* Offset to shift bits in */
-#define DMA_MODE_DSIZE_OFF 0x05
-/* Size modifiers */
-#define DMA_MODE_SIZE_LONG 0x00
-#define DMA_MODE_SIZE_BYTE 0x01
-#define DMA_MODE_SIZE_WORD 0x02
-#define DMA_MODE_SIZE_LINE 0x03
-
-/*
- * Aliases to help speed quick ports; these may be suboptimal, however. They
- * do not include the SINGLE mode modifiers since the MCF5272 does not have a
- * mode where the device is in control of its addressing.
- */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-
-#endif /* !defined(CONFIG_M5272) */
-
-#if !defined(CONFIG_M5272)
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
- volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
- printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
- volatile unsigned short *dmawp;
- volatile unsigned char *dmapb;
-
-#ifdef DMA_DEBUG
- printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- dmapb = (unsigned char *) dma_base_addr[dmanr];
-
- /* Turn off external requests, and stop any DMA in progress */
- dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
- dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
- volatile unsigned char *dmabp;
- volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
-
- dmabp = (unsigned char *) dma_base_addr[dmanr];
- dmawp = (unsigned short *) dma_base_addr[dmanr];
-
- // Clear config errors
- dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE;
-
- // Set command register
- dmawp[MCFDMA_DCR] =
- MCFDMA_DCR_INT | // Enable completion irq
- MCFDMA_DCR_CS | // Force one xfer per request
- MCFDMA_DCR_AA | // Enable auto alignment
- // single-address-mode
- ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
- // sets s_rw (-> r/w) high if Memory to I/0
- ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
- // Memory to I/O or I/O to Memory
- ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
- // 32 bit, 16 bit or 8 bit transfers
- ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD :
- ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
- MCFDMA_DCR_SSIZE_BYTE)) |
- ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD :
- ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
- MCFDMA_DCR_DSIZE_BYTE));
-
-#ifdef DEBUG_DMA
- printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
- dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
- (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
- volatile unsigned short *dmawp;
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- dmalp = (unsigned int *) dma_base_addr[dmanr];
-
- // Determine which address registers are used for memory/device accesses
- if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
- // Source incrementing, must be memory
- dmalp[MCFDMA_SAR] = a;
- // Set dest address, must be device
- dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
- } else {
- // Destination incrementing, must be memory
- dmalp[MCFDMA_DAR] = a;
- // Set source address, must be device
- dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
- }
-
-#ifdef DEBUG_DMA
- printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
- __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
- (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
- (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
- printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
- dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
- volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- dmawp[MCFDMA_BCR] = (unsigned short)count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
- volatile unsigned short *dmawp;
- unsigned short count;
-
-#ifdef DMA_DEBUG
- printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- count = dmawp[MCFDMA_BCR];
- return((int) count);
-}
-#else /* CONFIG_M5272 is defined */
-
-/*
- * The MCF5272 DMA controller is very different than the controller defined above
- * in terms of register mapping. For instance, with the exception of the 16-bit
- * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
- *
- * The big difference, however, is the lack of device-requested DMA. All modes
- * are dual address transfer, and there is no 'device' setup or direction bit.
- * You can DMA between a device and memory, between memory and memory, or even between
- * two devices directly, with any combination of incrementing and non-incrementing
- * addresses you choose. This puts a crimp in distinguishing between the 'device
- * address' set up by set_dma_device_addr.
- *
- * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr,
- * which will act exactly as above in -- it will look to see if the source is set to
- * autoincrement, and if so it will make the source use the set_dma_addr value and the
- * destination the set_dma_device_addr value. Otherwise the source will be set to the
- * set_dma_device_addr value and the destination will get the set_dma_addr value.
- *
- * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
- * and make it explicit. Depending on what you're doing, one of these two should work
- * for you, but don't mix them in the same transfer setup.
- */
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
- dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
-
- /* Turn off external requests, and stop any DMA in progress */
- dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
- dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
- volatile unsigned int *dmalp;
- volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
- dmalp = (unsigned int *) dma_base_addr[dmanr];
- dmawp = (unsigned short *) dma_base_addr[dmanr];
-
- // Clear config errors
- dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
-
- // Set command register
- dmalp[MCFDMA_DMR] =
- MCFDMA_DMR_RQM_DUAL | // Mandatory Request Mode setting
- MCFDMA_DMR_DSTT_SD | // Set up addressing types; set to supervisor-data.
- MCFDMA_DMR_SRCT_SD | // Set up addressing types; set to supervisor-data.
- // source static-address-mode
- ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
- // dest static-address-mode
- ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
- // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272
- (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
- (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
-
- dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */
-
-#ifdef DEBUG_DMA
- printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
- dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
- (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
-
- // Determine which address registers are used for memory/device accesses
- if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
- // Source incrementing, must be memory
- dmalp[MCFDMA_DSAR] = a;
- // Set dest address, must be device
- dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
- } else {
- // Destination incrementing, must be memory
- dmalp[MCFDMA_DDAR] = a;
- // Set source address, must be device
- dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
- }
-
-#ifdef DEBUG_DMA
- printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
- __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
- (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
- (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
- printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
- dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- *
- * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
- dmalp[MCFDMA_DBCR] = count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
- volatile unsigned int *dmalp;
- unsigned int count;
-
-#ifdef DMA_DEBUG
- printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
- count = dmalp[MCFDMA_DBCR];
- return(count);
-}
-
-#endif /* !defined(CONFIG_M5272) */
-#endif /* CONFIG_COLDFIRE */
-
-#define MAX_DMA_CHANNELS 8
-
-/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any
- occurrence should be flagged as an error. */
-/* under 2.4 it is actually needed by the new bootmem allocator */
-#define MAX_DMA_ADDRESS PAGE_OFFSET
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char *device_id); /* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr); /* release it again */
-
-#endif /* _M68K_DMA_H */
+++ /dev/null
-#ifndef __ASMm68k_ELF_H
-#define __ASMm68k_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-/*
- * 68k ELF relocation types
- */
-#define R_68K_NONE 0
-#define R_68K_32 1
-#define R_68K_16 2
-#define R_68K_8 3
-#define R_68K_PC32 4
-#define R_68K_PC16 5
-#define R_68K_PC8 6
-#define R_68K_GOT32 7
-#define R_68K_GOT16 8
-#define R_68K_GOT8 9
-#define R_68K_GOT32O 10
-#define R_68K_GOT16O 11
-#define R_68K_GOT8O 12
-#define R_68K_PLT32 13
-#define R_68K_PLT16 14
-#define R_68K_PLT8 15
-#define R_68K_PLT32O 16
-#define R_68K_PLT16O 17
-#define R_68K_PLT8O 18
-#define R_68K_COPY 19
-#define R_68K_GLOB_DAT 20
-#define R_68K_JMP_SLOT 21
-#define R_68K_RELATIVE 22
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_m68kfp_struct elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_68K)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS ELFCLASS32
-#define ELF_DATA ELFDATA2MSB
-#define ELF_ARCH EM_68K
-
-/* For SVR4/m68k the function pointer to be registered with `atexit' is
- passed in %a1. Although my copy of the ABI has no such statement, it
- is actually used on ASV. */
-#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE 4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
- use of this is to invoke "./ld.so someprog" to test out a new version of
- the loader. We need to make sure that it is out of the way of the program
- that it will "exec", and that there is sufficient room for the brk. */
-
-#define ELF_ET_DYN_BASE 0xD0000000UL
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs) \
- /* Bleech. */ \
- pr_reg[0] = regs->d1; \
- pr_reg[1] = regs->d2; \
- pr_reg[2] = regs->d3; \
- pr_reg[3] = regs->d4; \
- pr_reg[4] = regs->d5; \
- pr_reg[7] = regs->a0; \
- pr_reg[8] = regs->a1; \
- pr_reg[14] = regs->d0; \
- pr_reg[15] = rdusp(); \
- pr_reg[16] = 0 /* regs->orig_d0 */; \
- pr_reg[17] = regs->sr; \
- pr_reg[18] = regs->pc; \
- /* pr_reg[19] = (regs->format << 12) | regs->vector; */ \
- { \
- struct switch_stack *sw = ((struct switch_stack *)regs) - 1; \
- pr_reg[5] = sw->d6; \
- pr_reg[6] = sw->d7; \
- pr_reg[10] = sw->a3; \
- pr_reg[11] = sw->a4; \
- pr_reg[12] = sw->a5; \
- pr_reg[13] = sw->a6; \
- }
-
-/* This yields a mask that user programs can use to figure out what
- instruction set this cpu supports. */
-
-#define ELF_HWCAP (0)
-
-/* This yields a string that ld.so will use to load implementation
- specific libraries for optimization. This is more specific in
- intent than poking at uname or /proc/cpuinfo. */
-
-#define ELF_PLATFORM (NULL)
-
-#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
-
-#endif
+++ /dev/null
-/****************************************************************************/
-
-/*
- * elia.h -- Lineo (formerly Moreton Bay) eLIA platform support.
- *
- * (C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au)
- * (C) Copyright 1999-2000, Lineo (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef elia_h
-#define elia_h
-/****************************************************************************/
-
-#include <asm/coldfire.h>
-
-#ifdef CONFIG_eLIA
-
-/*
- * The serial port DTR and DCD lines are also on the Parallel I/O
- * as well, so define those too.
- */
-
-#define eLIA_DCD1 0x0001
-#define eLIA_DCD0 0x0002
-#define eLIA_DTR1 0x0004
-#define eLIA_DTR0 0x0008
-
-#define eLIA_PCIRESET 0x0020
-
-/*
- * Kernel macros to set and unset the LEDs.
- */
-#ifndef __ASSEMBLY__
-extern unsigned short ppdata;
-#endif /* __ASSEMBLY__ */
-
-#endif /* CONFIG_eLIA */
-
-/****************************************************************************/
-#endif /* elia_h */
+++ /dev/null
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
+++ /dev/null
-#ifndef __M68KNOMMU_ENTRY_H
-#define __M68KNOMMU_ENTRY_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-/*
- * Stack layout in 'ret_from_exception':
- *
- * This allows access to the syscall arguments in registers d1-d5
- *
- * 0(sp) - d1
- * 4(sp) - d2
- * 8(sp) - d3
- * C(sp) - d4
- * 10(sp) - d5
- * 14(sp) - a0
- * 18(sp) - a1
- * 1C(sp) - a2
- * 20(sp) - d0
- * 24(sp) - orig_d0
- * 28(sp) - stack adjustment
- * 2C(sp) - [ sr ] [ format & vector ]
- * 2E(sp) - [ pc-hiword ] [ sr ]
- * 30(sp) - [ pc-loword ] [ pc-hiword ]
- * 32(sp) - [ format & vector ] [ pc-loword ]
- * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^
- * M68K COLDFIRE
- */
-
-#define ALLOWINT 0xf8ff
-
-#ifdef __ASSEMBLY__
-
-/* process bits for task_struct.flags */
-PF_TRACESYS_OFF = 3
-PF_TRACESYS_BIT = 5
-PF_PTRACED_OFF = 3
-PF_PTRACED_BIT = 4
-PF_DTRACE_OFF = 1
-PF_DTRACE_BIT = 5
-
-LENOSYS = 38
-
-#define SWITCH_STACK_SIZE (6*4+4) /* Includes return address */
-
-/*
- * This defines the normal kernel pt-regs layout.
- *
- * regs are a2-a6 and d6-d7 preserved by C code
- * the kernel doesn't mess with usp unless it needs to
- */
-
-#ifdef CONFIG_COLDFIRE
-/*
- * This is made a little more tricky on the ColdFire. There is no
- * separate kernel and user stack pointers. Need to artificially
- * construct a usp in software... When doing this we need to disable
- * interrupts, otherwise bad things could happen.
- */
-.macro SAVE_ALL
- move #0x2700,%sr /* disable intrs */
- btst #5,%sp@(2) /* from user? */
- bnes 6f /* no, skip */
- movel %sp,sw_usp /* save user sp */
- addql #8,sw_usp /* remove exception */
- movel sw_ksp,%sp /* kernel sp */
- subql #8,%sp /* room for exception */
- clrl %sp@- /* stkadj */
- movel %d0,%sp@- /* orig d0 */
- movel %d0,%sp@- /* d0 */
- lea %sp@(-32),%sp /* space for 8 regs */
- moveml %d1-%d5/%a0-%a2,%sp@
- movel sw_usp,%a0 /* get usp */
- movel %a0@-,%sp@(PT_PC) /* copy exception program counter */
- movel %a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */
- bra 7f
- 6:
- clrl %sp@- /* stkadj */
- movel %d0,%sp@- /* orig d0 */
- movel %d0,%sp@- /* d0 */
- lea %sp@(-32),%sp /* space for 8 regs */
- moveml %d1-%d5/%a0-%a2,%sp@
- 7:
-.endm
-
-.macro RESTORE_ALL
- btst #5,%sp@(PT_SR) /* going user? */
- bnes 8f /* no, skip */
- move #0x2700,%sr /* disable intrs */
- movel sw_usp,%a0 /* get usp */
- movel %sp@(PT_PC),%a0@- /* copy exception program counter */
- movel %sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */
- moveml %sp@,%d1-%d5/%a0-%a2
- lea %sp@(32),%sp /* space for 8 regs */
- movel %sp@+,%d0
- addql #4,%sp /* orig d0 */
- addl %sp@+,%sp /* stkadj */
- addql #8,%sp /* remove exception */
- movel %sp,sw_ksp /* save ksp */
- subql #8,sw_usp /* set exception */
- movel sw_usp,%sp /* restore usp */
- rte
- 8:
- moveml %sp@,%d1-%d5/%a0-%a2
- lea %sp@(32),%sp /* space for 8 regs */
- movel %sp@+,%d0
- addql #4,%sp /* orig d0 */
- addl %sp@+,%sp /* stkadj */
- rte
-.endm
-
-/*
- * Quick exception save, use current stack only.
- */
-.macro SAVE_LOCAL
- move #0x2700,%sr /* disable intrs */
- clrl %sp@- /* stkadj */
- movel %d0,%sp@- /* orig d0 */
- movel %d0,%sp@- /* d0 */
- lea %sp@(-32),%sp /* space for 8 regs */
- moveml %d1-%d5/%a0-%a2,%sp@
-.endm
-
-.macro RESTORE_LOCAL
- moveml %sp@,%d1-%d5/%a0-%a2
- lea %sp@(32),%sp /* space for 8 regs */
- movel %sp@+,%d0
- addql #4,%sp /* orig d0 */
- addl %sp@+,%sp /* stkadj */
- rte
-.endm
-
-.macro SAVE_SWITCH_STACK
- lea %sp@(-24),%sp /* 6 regs */
- moveml %a3-%a6/%d6-%d7,%sp@
-.endm
-
-.macro RESTORE_SWITCH_STACK
- moveml %sp@,%a3-%a6/%d6-%d7
- lea %sp@(24),%sp /* 6 regs */
-.endm
-
-/*
- * Software copy of the user and kernel stack pointers... Ugh...
- * Need these to get around ColdFire not having separate kernel
- * and user stack pointers.
- */
-.globl sw_usp
-.globl sw_ksp
-
-#else /* !CONFIG_COLDFIRE */
-
-/*
- * Standard 68k interrupt entry and exit macros.
- */
-.macro SAVE_ALL
- clrl %sp@- /* stkadj */
- movel %d0,%sp@- /* orig d0 */
- movel %d0,%sp@- /* d0 */
- moveml %d1-%d5/%a0-%a2,%sp@-
-.endm
-
-.macro RESTORE_ALL
- moveml %sp@+,%a0-%a2/%d1-%d5
- movel %sp@+,%d0
- addql #4,%sp /* orig d0 */
- addl %sp@+,%sp /* stkadj */
- rte
-.endm
-
-.macro SAVE_SWITCH_STACK
- moveml %a3-%a6/%d6-%d7,%sp@-
-.endm
-
-.macro RESTORE_SWITCH_STACK
- moveml %sp@+,%a3-%a6/%d6-%d7
-.endm
-
-#endif /* !CONFIG_COLDFIRE */
-#endif /* __ASSEMBLY__ */
-#endif /* __M68KNOMMU_ENTRY_H */
+++ /dev/null
-#include <asm-m68k/errno.h>
+++ /dev/null
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-#include <linux/fb.h>
-
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
- return 0;
-}
-
-#endif /* _ASM_FB_H_ */
+++ /dev/null
-#include <asm-m68k/fcntl.h>
+++ /dev/null
-/*
- * include/asm-m68knommu/flat.h -- uClinux flat-format executables
- */
-
-#ifndef __M68KNOMMU_FLAT_H__
-#define __M68KNOMMU_FLAT_H__
-
-#define flat_stack_align(sp) /* nothing needed */
-#define flat_argvp_envp_on_stack() 1
-#define flat_old_ram_flag(flags) (flags)
-#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp)
-#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp)
-#define flat_get_relocate_addr(rel) (rel)
-#define flat_set_persistent(relval, p) 0
-
-#endif /* __M68KNOMMU_FLAT_H__ */
+++ /dev/null
-#ifndef __M68KNOMMU_FPU_H
-#define __M68KNOMMU_FPU_H
-
-
-/*
- * MAX floating point unit state size (FSAVE/FRESTORE)
- */
-#if defined(CONFIG_M68020) || defined(CONFIG_M68030)
-#define FPSTATESIZE (216/sizeof(unsigned char))
-#elif defined(CONFIG_M68040)
-#define FPSTATESIZE (96/sizeof(unsigned char))
-#elif defined(CONFIG_M68KFPU_EMU)
-#define FPSTATESIZE (28/sizeof(unsigned char))
-#elif defined(CONFIG_M68060)
-#define FPSTATESIZE (12/sizeof(unsigned char))
-#else
-/* Assume no FP unit present then... */
-#define FPSTATESIZE (2) /* dummy size */
-#endif
-
-#endif /* __M68K_FPU_H */
+++ /dev/null
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
+++ /dev/null
-#ifndef __M68K_HARDIRQ_H
-#define __M68K_HARDIRQ_H
-
-#include <linux/cache.h>
-#include <linux/threads.h>
-#include <asm/irq.h>
-
-typedef struct {
- unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-#define HARDIRQ_BITS 8
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-void ack_bad_irq(unsigned int irq);
-
-#endif /* __M68K_HARDIRQ_H */
+++ /dev/null
-#ifndef __M68KNOMMU_HW_IRQ_H__
-#define __M68KNOMMU_HW_IRQ_H__
-
-#endif /* __M68KNOMMU_HW_IRQ_H__ */
+++ /dev/null
-#include <asm-m68k/hwtest.h>
+++ /dev/null
-#ifndef _M68KNOMMU_IO_H
-#define _M68KNOMMU_IO_H
-
-#ifdef __KERNEL__
-
-
-/*
- * These are for ISA/PCI shared memory _only_ and should never be used
- * on any other type of memory, including Zorro memory. They are meant to
- * access the bus in the bus byte order which is little-endian!.
- *
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the m68k architecture, we just read/write the
- * memory location directly.
- */
-/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesireable for some devices.
- */
-
-/*
- * swap functions are sometimes needed to interface little-endian hardware
- */
-static inline unsigned short _swapw(volatile unsigned short v)
-{
- return ((v << 8) | (v >> 8));
-}
-
-static inline unsigned int _swapl(volatile unsigned long v)
-{
- return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
-}
-
-#define readb(addr) \
- ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
-#define readw(addr) \
- ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
-#define readl(addr) \
- ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
-
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
-#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
-#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
-
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-static inline void io_outsb(unsigned int addr, void *buf, int len)
-{
- volatile unsigned char *ap = (volatile unsigned char *) addr;
- unsigned char *bp = (unsigned char *) buf;
- while (len--)
- *ap = *bp++;
-}
-
-static inline void io_outsw(unsigned int addr, void *buf, int len)
-{
- volatile unsigned short *ap = (volatile unsigned short *) addr;
- unsigned short *bp = (unsigned short *) buf;
- while (len--)
- *ap = _swapw(*bp++);
-}
-
-static inline void io_outsl(unsigned int addr, void *buf, int len)
-{
- volatile unsigned int *ap = (volatile unsigned int *) addr;
- unsigned int *bp = (unsigned int *) buf;
- while (len--)
- *ap = _swapl(*bp++);
-}
-
-static inline void io_insb(unsigned int addr, void *buf, int len)
-{
- volatile unsigned char *ap = (volatile unsigned char *) addr;
- unsigned char *bp = (unsigned char *) buf;
- while (len--)
- *bp++ = *ap;
-}
-
-static inline void io_insw(unsigned int addr, void *buf, int len)
-{
- volatile unsigned short *ap = (volatile unsigned short *) addr;
- unsigned short *bp = (unsigned short *) buf;
- while (len--)
- *bp++ = _swapw(*ap);
-}
-
-static inline void io_insl(unsigned int addr, void *buf, int len)
-{
- volatile unsigned int *ap = (volatile unsigned int *) addr;
- unsigned int *bp = (unsigned int *) buf;
- while (len--)
- *bp++ = _swapl(*ap);
-}
-
-#define mmiowb()
-
-/*
- * make the short names macros so specific devices
- * can override them as required
- */
-
-#define memset_io(a,b,c) memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
-
-#define inb(addr) readb(addr)
-#define inw(addr) readw(addr)
-#define inl(addr) readl(addr)
-#define outb(x,addr) ((void) writeb(x,addr))
-#define outw(x,addr) ((void) writew(x,addr))
-#define outl(x,addr) ((void) writel(x,addr))
-
-#define inb_p(addr) inb(addr)
-#define inw_p(addr) inw(addr)
-#define inl_p(addr) inl(addr)
-#define outb_p(x,addr) outb(x,addr)
-#define outw_p(x,addr) outw(x,addr)
-#define outl_p(x,addr) outl(x,addr)
-
-#define outsb(a,b,l) io_outsb(a,b,l)
-#define outsw(a,b,l) io_outsw(a,b,l)
-#define outsl(a,b,l) io_outsl(a,b,l)
-
-#define insb(a,b,l) io_insb(a,b,l)
-#define insw(a,b,l) io_insw(a,b,l)
-#define insl(a,b,l) io_insl(a,b,l)
-
-#define IO_SPACE_LIMIT 0xffff
-
-
-/* Values for nocacheflag and cmode */
-#define IOMAP_FULL_CACHING 0
-#define IOMAP_NOCACHE_SER 1
-#define IOMAP_NOCACHE_NONSER 2
-#define IOMAP_WRITETHROUGH 3
-
-extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
-extern void __iounmap(void *addr, unsigned long size);
-
-static inline void *ioremap(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-}
-static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-}
-
-extern void iounmap(void *addr);
-
-/* Pages to physical address... */
-#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
-#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT)
-
-/*
- * Macros used for converting between virtual and physical mappings.
- */
-#define phys_to_virt(vaddr) ((void *) (vaddr))
-#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
-
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p) p
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68KNOMMU_IO_H */
+++ /dev/null
-#include <asm-generic/ioctl.h>
+++ /dev/null
-#include <asm-m68k/ioctls.h>
+++ /dev/null
-#include <asm-m68k/ipcbuf.h>
+++ /dev/null
-#ifndef _M68KNOMMU_IRQ_H_
-#define _M68KNOMMU_IRQ_H_
-
-#ifdef CONFIG_COLDFIRE
-/*
- * On the ColdFire we keep track of all vectors. That way drivers
- * can register whatever vector number they wish, and we can deal
- * with it.
- */
-#define SYS_IRQS 256
-#define NR_IRQS SYS_IRQS
-
-#else
-
-/*
- * # of m68k interrupts
- */
-#define SYS_IRQS 8
-#define NR_IRQS (24 + SYS_IRQS)
-
-#endif /* CONFIG_COLDFIRE */
-
-
-#define irq_canonicalize(irq) (irq)
-
-#endif /* _M68KNOMMU_IRQ_H_ */
+++ /dev/null
-#include <asm-generic/irq_regs.h>
+++ /dev/null
-#include <asm-generic/kdebug.h>
+++ /dev/null
-#ifndef __ASM_M68K_KMAP_TYPES_H
-#define __ASM_M68K_KMAP_TYPES_H
-
-enum km_type {
- KM_BOUNCE_READ,
- KM_SKB_SUNRPC_DATA,
- KM_SKB_DATA_SOFTIRQ,
- KM_USER0,
- KM_USER1,
- KM_BIO_SRC_IRQ,
- KM_BIO_DST_IRQ,
- KM_PTE0,
- KM_PTE1,
- KM_IRQ0,
- KM_IRQ1,
- KM_SOFTIRQ0,
- KM_SOFTIRQ1,
- KM_TYPE_NR
-};
-
-#endif
+++ /dev/null
-#include <asm-m68k/linkage.h>
+++ /dev/null
-#ifndef __M68KNOMMU_LOCAL_H
-#define __M68KNOMMU_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __M68KNOMMU_LOCAL_H */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m5206sim.h -- ColdFire 5206 System Integration Module support.
- *
- * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef m5206sim_h
-#define m5206sim_h
-/****************************************************************************/
-
-
-/*
- * Define the 5206 SIM register set addresses.
- */
-#define MCFSIM_SIMR 0x03 /* SIM Config reg (r/w) */
-#define MCFSIM_ICR1 0x14 /* Intr Ctrl reg 1 (r/w) */
-#define MCFSIM_ICR2 0x15 /* Intr Ctrl reg 2 (r/w) */
-#define MCFSIM_ICR3 0x16 /* Intr Ctrl reg 3 (r/w) */
-#define MCFSIM_ICR4 0x17 /* Intr Ctrl reg 4 (r/w) */
-#define MCFSIM_ICR5 0x18 /* Intr Ctrl reg 5 (r/w) */
-#define MCFSIM_ICR6 0x19 /* Intr Ctrl reg 6 (r/w) */
-#define MCFSIM_ICR7 0x1a /* Intr Ctrl reg 7 (r/w) */
-#define MCFSIM_ICR8 0x1b /* Intr Ctrl reg 8 (r/w) */
-#define MCFSIM_ICR9 0x1c /* Intr Ctrl reg 9 (r/w) */
-#define MCFSIM_ICR10 0x1d /* Intr Ctrl reg 10 (r/w) */
-#define MCFSIM_ICR11 0x1e /* Intr Ctrl reg 11 (r/w) */
-#define MCFSIM_ICR12 0x1f /* Intr Ctrl reg 12 (r/w) */
-#define MCFSIM_ICR13 0x20 /* Intr Ctrl reg 13 (r/w) */
-#ifdef CONFIG_M5206e
-#define MCFSIM_ICR14 0x21 /* Intr Ctrl reg 14 (r/w) */
-#define MCFSIM_ICR15 0x22 /* Intr Ctrl reg 15 (r/w) */
-#endif
-
-#define MCFSIM_IMR 0x36 /* Interrupt Mask reg (r/w) */
-#define MCFSIM_IPR 0x3a /* Interrupt Pend reg (r/w) */
-
-#define MCFSIM_RSR 0x40 /* Reset Status reg (r/w) */
-#define MCFSIM_SYPCR 0x41 /* System Protection reg (r/w)*/
-
-#define MCFSIM_SWIVR 0x42 /* SW Watchdog intr reg (r/w) */
-#define MCFSIM_SWSR 0x43 /* SW Watchdog service (r/w) */
-
-#define MCFSIM_DCRR 0x46 /* DRAM Refresh reg (r/w) */
-#define MCFSIM_DCTR 0x4a /* DRAM Timing reg (r/w) */
-#define MCFSIM_DAR0 0x4c /* DRAM 0 Address reg(r/w) */
-#define MCFSIM_DMR0 0x50 /* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DCR0 0x57 /* DRAM 0 Control reg (r/w) */
-#define MCFSIM_DAR1 0x58 /* DRAM 1 Address reg (r/w) */
-#define MCFSIM_DMR1 0x5c /* DRAM 1 Mask reg (r/w) */
-#define MCFSIM_DCR1 0x63 /* DRAM 1 Control reg (r/w) */
-
-#define MCFSIM_CSAR0 0x64 /* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0 0x68 /* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0 0x6e /* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1 0x70 /* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1 0x74 /* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1 0x7a /* CS 1 Control reg (r/w) */
-#define MCFSIM_CSAR2 0x7c /* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2 0x80 /* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2 0x86 /* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3 0x88 /* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3 0x8c /* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3 0x92 /* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4 0x94 /* CS 4 Address reg (r/w) */
-#define MCFSIM_CSMR4 0x98 /* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4 0x9e /* CS 4 Control reg (r/w) */
-#define MCFSIM_CSAR5 0xa0 /* CS 5 Address reg (r/w) */
-#define MCFSIM_CSMR5 0xa4 /* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5 0xaa /* CS 5 Control reg (r/w) */
-#define MCFSIM_CSAR6 0xac /* CS 6 Address reg (r/w) */
-#define MCFSIM_CSMR6 0xb0 /* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6 0xb6 /* CS 6 Control reg (r/w) */
-#define MCFSIM_CSAR7 0xb8 /* CS 7 Address reg (r/w) */
-#define MCFSIM_CSMR7 0xbc /* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7 0xc2 /* CS 7 Control reg (r/w) */
-#define MCFSIM_DMCR 0xc6 /* Default control */
-
-#ifdef CONFIG_M5206e
-#define MCFSIM_PAR 0xca /* Pin Assignment reg (r/w) */
-#else
-#define MCFSIM_PAR 0xcb /* Pin Assignment reg (r/w) */
-#endif
-
-#define MCFSIM_PADDR 0x1c5 /* Parallel Direction (r/w) */
-#define MCFSIM_PADAT 0x1c9 /* Parallel Port Value (r/w) */
-
-/*
- * Some symbol defines for the Parallel Port Pin Assignment Register
- */
-#ifdef CONFIG_M5206e
-#define MCFSIM_PAR_DREQ0 0x100 /* Set to select DREQ0 input */
- /* Clear to select T0 input */
-#define MCFSIM_PAR_DREQ1 0x200 /* Select DREQ1 input */
- /* Clear to select T0 output */
-#endif
-
-/*
- * Some symbol defines for the Interrupt Control Register
- */
-#define MCFSIM_SWDICR MCFSIM_ICR8 /* Watchdog timer ICR */
-#define MCFSIM_TIMER1ICR MCFSIM_ICR9 /* Timer 1 ICR */
-#define MCFSIM_TIMER2ICR MCFSIM_ICR10 /* Timer 2 ICR */
-#define MCFSIM_UART1ICR MCFSIM_ICR12 /* UART 1 ICR */
-#define MCFSIM_UART2ICR MCFSIM_ICR13 /* UART 2 ICR */
-#ifdef CONFIG_M5206e
-#define MCFSIM_DMA1ICR MCFSIM_ICR14 /* DMA 1 ICR */
-#define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */
-#endif
-
-#if defined(CONFIG_M5206e)
-#define MCFSIM_IMR_MASKALL 0xfffe /* All SIM intr sources */
-#endif
-
-/*
- * Macro to get and set IMR register. It is 16 bits on the 5206.
- */
-#define mcf_getimr() \
- *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR))
-
-#define mcf_setimr(imr) \
- *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr)
-
-#define mcf_getipr() \
- *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR))
-
-/****************************************************************************/
-#endif /* m5206sim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m520xsim.h -- ColdFire 5207/5208 System Integration Module support.
- *
- * (C) Copyright 2005, Intec Automation (mike@steroidmicros.com)
- */
-
-/****************************************************************************/
-#ifndef m520xsim_h
-#define m520xsim_h
-/****************************************************************************/
-
-
-/*
- * Define the 5282 SIM register set addresses.
- */
-#define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */
-#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
-#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
-#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
-#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
-#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
-#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
-#define MCFINTC_ICR0 0x40 /* Base ICR register */
-
-#define MCFINT_VECBASE 64
-#define MCFINT_UART0 26 /* Interrupt number for UART0 */
-#define MCFINT_UART1 27 /* Interrupt number for UART1 */
-#define MCFINT_UART2 28 /* Interrupt number for UART2 */
-#define MCFINT_QSPI 31 /* Interrupt number for QSPI */
-#define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */
-
-/*
- * SDRAM configuration registers.
- */
-#define MCFSIM_SDMR 0x000a8000 /* SDRAM Mode/Extended Mode Register */
-#define MCFSIM_SDCR 0x000a8004 /* SDRAM Control Register */
-#define MCFSIM_SDCFG1 0x000a8008 /* SDRAM Configuration Register 1 */
-#define MCFSIM_SDCFG2 0x000a800c /* SDRAM Configuration Register 2 */
-#define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */
-#define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */
-
-
-#define MCF_GPIO_PAR_UART (0xA4036)
-#define MCF_GPIO_PAR_FECI2C (0xA4033)
-#define MCF_GPIO_PAR_FEC (0xA4038)
-
-#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001)
-#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0002)
-
-#define MCF_GPIO_PAR_UART_PAR_URXD1 (0x0040)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1 (0x0080)
-
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04)
-
-#define ICR_INTRCONF 0x05
-#define MCFPIT_IMR MCFINTC_IMRL
-#define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1)
-
-/****************************************************************************/
-#endif /* m520xsim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m523xsim.h -- ColdFire 523x System Integration Module support.
- *
- * (C) Copyright 2003-2005, Greg Ungerer <gerg@snapgear.com>
- */
-
-/****************************************************************************/
-#ifndef m523xsim_h
-#define m523xsim_h
-/****************************************************************************/
-
-
-/*
- * Define the 523x SIM register set addresses.
- */
-#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */
-#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */
-#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
-#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
-#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
-#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
-#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
-#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
-#define MCFINTC_IRLR 0x18 /* */
-#define MCFINTC_IACKL 0x19 /* */
-#define MCFINTC_ICR0 0x40 /* Base ICR register */
-
-#define MCFINT_VECBASE 64 /* Vector base number */
-#define MCFINT_UART0 13 /* Interrupt number for UART0 */
-#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
-#define MCFINT_QSPI 18 /* Interrupt number for QSPI */
-
-/*
- * SDRAM configuration registers.
- */
-#define MCFSIM_DCR 0x44 /* SDRAM control */
-#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */
-#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */
-#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
-#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
-
-/****************************************************************************/
-#endif /* m523xsim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m5249sim.h -- ColdFire 5249 System Integration Module support.
- *
- * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef m5249sim_h
-#define m5249sim_h
-/****************************************************************************/
-
-/*
- * Define the 5249 SIM register set addresses.
- */
-#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */
-#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/
-#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */
-#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */
-#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */
-#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */
-#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/
-#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */
-#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */
-#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */
-#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */
-#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */
-#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */
-#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */
-#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */
-#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */
-#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */
-#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */
-#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */
-#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */
-#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */
-#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
-#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
-
-#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */
-#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
-
-
-/*
- * Some symbol defines for the above...
- */
-#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
-#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
-#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
-#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
-#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
-#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
-#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
-#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
-#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
-
-/*
- * General purpose IO registers (in MBAR2).
- */
-#define MCFSIM2_GPIOREAD 0x0 /* GPIO read values */
-#define MCFSIM2_GPIOWRITE 0x4 /* GPIO write values */
-#define MCFSIM2_GPIOENABLE 0x8 /* GPIO enabled */
-#define MCFSIM2_GPIOFUNC 0xc /* GPIO function */
-#define MCFSIM2_GPIO1READ 0xb0 /* GPIO1 read values */
-#define MCFSIM2_GPIO1WRITE 0xb4 /* GPIO1 write values */
-#define MCFSIM2_GPIO1ENABLE 0xb8 /* GPIO1 enabled */
-#define MCFSIM2_GPIO1FUNC 0xbc /* GPIO1 function */
-
-#define MCFSIM2_GPIOINTSTAT 0xc0 /* GPIO interrupt status */
-#define MCFSIM2_GPIOINTCLEAR 0xc0 /* GPIO interrupt clear */
-#define MCFSIM2_GPIOINTENABLE 0xc4 /* GPIO interrupt enable */
-
-#define MCFSIM2_INTLEVEL1 0x140 /* Interrupt level reg 1 */
-#define MCFSIM2_INTLEVEL2 0x144 /* Interrupt level reg 2 */
-#define MCFSIM2_INTLEVEL3 0x148 /* Interrupt level reg 3 */
-#define MCFSIM2_INTLEVEL4 0x14c /* Interrupt level reg 4 */
-#define MCFSIM2_INTLEVEL5 0x150 /* Interrupt level reg 5 */
-#define MCFSIM2_INTLEVEL6 0x154 /* Interrupt level reg 6 */
-#define MCFSIM2_INTLEVEL7 0x158 /* Interrupt level reg 7 */
-#define MCFSIM2_INTLEVEL8 0x15c /* Interrupt level reg 8 */
-
-#define MCFSIM2_DMAROUTE 0x188 /* DMA routing */
-
-#define MCFSIM2_IDECONFIG1 0x18c /* IDEconfig1 */
-#define MCFSIM2_IDECONFIG2 0x190 /* IDEconfig2 */
-
-
-/*
- * Macro to set IMR register. It is 32 bits on the 5249.
- */
-#define MCFSIM_IMR_MASKALL 0x7fffe /* All SIM intr sources */
-
-#define mcf_getimr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define mcf_setimr(imr) \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define mcf_getipr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-/****************************************************************************/
-
-#ifdef __ASSEMBLER__
-
-/*
- * The M5249C3 board needs a little help getting all its SIM devices
- * initialized at kernel start time. dBUG doesn't set much up, so
- * we need to do it manually.
- */
-.macro m5249c3_setup
- /*
- * Set MBAR1 and MBAR2, just incase they are not set.
- */
- movel #0x10000001,%a0
- movec %a0,%MBAR /* map MBAR region */
- subql #1,%a0 /* get MBAR address in a0 */
-
- movel #0x80000001,%a1
- movec %a1,#3086 /* map MBAR2 region */
- subql #1,%a1 /* get MBAR2 address in a1 */
-
- /*
- * Move secondary interrupts to base at 128.
- */
- moveb #0x80,%d0
- moveb %d0,0x16b(%a1) /* interrupt base register */
-
- /*
- * Work around broken CSMR0/DRAM vector problem.
- */
- movel #0x001F0021,%d0 /* disable C/I bit */
- movel %d0,0x84(%a0) /* set CSMR0 */
-
- /*
- * Disable the PLL firstly. (Who knows what state it is
- * in here!).
- */
- movel 0x180(%a1),%d0 /* get current PLL value */
- andl #0xfffffffe,%d0 /* PLL bypass first */
- movel %d0,0x180(%a1) /* set PLL register */
- nop
-
-#if CONFIG_CLOCK_FREQ == 140000000
- /*
- * Set initial clock frequency. This assumes M5249C3 board
- * is fitted with 11.2896MHz crystal. It will program the
- * PLL for 140MHz. Lets go fast :-)
- */
- movel #0x125a40f0,%d0 /* set for 140MHz */
- movel %d0,0x180(%a1) /* set PLL register */
- orl #0x1,%d0
- movel %d0,0x180(%a1) /* set PLL register */
-#endif
-
- /*
- * Setup CS1 for ethernet controller.
- * (Setup as per M5249C3 doco).
- */
- movel #0xe0000000,%d0 /* CS1 mapped at 0xe0000000 */
- movel %d0,0x8c(%a0)
- movel #0x001f0021,%d0 /* CS1 size of 1Mb */
- movel %d0,0x90(%a0)
- movew #0x0080,%d0 /* CS1 = 16bit port, AA */
- movew %d0,0x96(%a0)
-
- /*
- * Setup CS2 for IDE interface.
- */
- movel #0x50000000,%d0 /* CS2 mapped at 0x50000000 */
- movel %d0,0x98(%a0)
- movel #0x001f0001,%d0 /* CS2 size of 1MB */
- movel %d0,0x9c(%a0)
- movew #0x0080,%d0 /* CS2 = 16bit, TA */
- movew %d0,0xa2(%a0)
-
- movel #0x00107000,%d0 /* IDEconfig1 */
- movel %d0,0x18c(%a1)
- movel #0x000c0400,%d0 /* IDEconfig2 */
- movel %d0,0x190(%a1)
-
- movel #0x00080000,%d0 /* GPIO19, IDE reset bit */
- orl %d0,0xc(%a1) /* function GPIO19 */
- orl %d0,0x8(%a1) /* enable GPIO19 as output */
- orl %d0,0x4(%a1) /* de-assert IDE reset */
-.endm
-
-#define PLATFORM_SETUP m5249c3_setup
-
-#endif /* __ASSEMBLER__ */
-
-/****************************************************************************/
-#endif /* m5249sim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m5272sim.h -- ColdFire 5272 System Integration Module support.
- *
- * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef m5272sim_h
-#define m5272sim_h
-/****************************************************************************/
-
-
-/*
- * Define the 5272 SIM register set addresses.
- */
-#define MCFSIM_SCR 0x04 /* SIM Config reg (r/w) */
-#define MCFSIM_SPR 0x06 /* System Protection reg (r/w)*/
-#define MCFSIM_PMR 0x08 /* Power Management reg (r/w) */
-#define MCFSIM_APMR 0x0e /* Active Low Power reg (r/w) */
-#define MCFSIM_DIR 0x10 /* Device Identity reg (r/w) */
-
-#define MCFSIM_ICR1 0x20 /* Intr Ctrl reg 1 (r/w) */
-#define MCFSIM_ICR2 0x24 /* Intr Ctrl reg 2 (r/w) */
-#define MCFSIM_ICR3 0x28 /* Intr Ctrl reg 3 (r/w) */
-#define MCFSIM_ICR4 0x2c /* Intr Ctrl reg 4 (r/w) */
-
-#define MCFSIM_ISR 0x30 /* Interrupt Source reg (r/w) */
-#define MCFSIM_PITR 0x34 /* Interrupt Transition (r/w) */
-#define MCFSIM_PIWR 0x38 /* Interrupt Wakeup reg (r/w) */
-#define MCFSIM_PIVR 0x3f /* Interrupt Vector reg (r/w( */
-
-#define MCFSIM_WRRR 0x280 /* Watchdog reference (r/w) */
-#define MCFSIM_WIRR 0x284 /* Watchdog interrupt (r/w) */
-#define MCFSIM_WCR 0x288 /* Watchdog counter (r/w) */
-#define MCFSIM_WER 0x28c /* Watchdog event (r/w) */
-
-#define MCFSIM_CSBR0 0x40 /* CS0 Base Address (r/w) */
-#define MCFSIM_CSOR0 0x44 /* CS0 Option (r/w) */
-#define MCFSIM_CSBR1 0x48 /* CS1 Base Address (r/w) */
-#define MCFSIM_CSOR1 0x4c /* CS1 Option (r/w) */
-#define MCFSIM_CSBR2 0x50 /* CS2 Base Address (r/w) */
-#define MCFSIM_CSOR2 0x54 /* CS2 Option (r/w) */
-#define MCFSIM_CSBR3 0x58 /* CS3 Base Address (r/w) */
-#define MCFSIM_CSOR3 0x5c /* CS3 Option (r/w) */
-#define MCFSIM_CSBR4 0x60 /* CS4 Base Address (r/w) */
-#define MCFSIM_CSOR4 0x64 /* CS4 Option (r/w) */
-#define MCFSIM_CSBR5 0x68 /* CS5 Base Address (r/w) */
-#define MCFSIM_CSOR5 0x6c /* CS5 Option (r/w) */
-#define MCFSIM_CSBR6 0x70 /* CS6 Base Address (r/w) */
-#define MCFSIM_CSOR6 0x74 /* CS6 Option (r/w) */
-#define MCFSIM_CSBR7 0x78 /* CS7 Base Address (r/w) */
-#define MCFSIM_CSOR7 0x7c /* CS7 Option (r/w) */
-
-#define MCFSIM_SDCR 0x180 /* SDRAM Configuration (r/w) */
-#define MCFSIM_SDTR 0x184 /* SDRAM Timing (r/w) */
-#define MCFSIM_DCAR0 0x4c /* DRAM 0 Address reg(r/w) */
-#define MCFSIM_DCMR0 0x50 /* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DCCR0 0x57 /* DRAM 0 Control reg (r/w) */
-#define MCFSIM_DCAR1 0x58 /* DRAM 1 Address reg (r/w) */
-#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */
-#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */
-
-#define MCFSIM_PACNT 0x80 /* Port A Control (r/w) */
-#define MCFSIM_PADDR 0x84 /* Port A Direction (r/w) */
-#define MCFSIM_PADAT 0x86 /* Port A Data (r/w) */
-#define MCFSIM_PBCNT 0x88 /* Port B Control (r/w) */
-#define MCFSIM_PBDDR 0x8c /* Port B Direction (r/w) */
-#define MCFSIM_PBDAT 0x8e /* Port B Data (r/w) */
-#define MCFSIM_PCDDR 0x94 /* Port C Direction (r/w) */
-#define MCFSIM_PCDAT 0x96 /* Port C Data (r/w) */
-#define MCFSIM_PDCNT 0x98 /* Port D Control (r/w) */
-
-
-/****************************************************************************/
-#endif /* m5272sim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m527xsim.h -- ColdFire 5270/5271 System Integration Module support.
- *
- * (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef m527xsim_h
-#define m527xsim_h
-/****************************************************************************/
-
-
-/*
- * Define the 5270/5271 SIM register set addresses.
- */
-#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */
-#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 1 */
-#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
-#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
-#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
-#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
-#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
-#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
-#define MCFINTC_IRLR 0x18 /* */
-#define MCFINTC_IACKL 0x19 /* */
-#define MCFINTC_ICR0 0x40 /* Base ICR register */
-
-#define MCFINT_VECBASE 64 /* Vector base number */
-#define MCFINT_UART0 13 /* Interrupt number for UART0 */
-#define MCFINT_UART1 14 /* Interrupt number for UART1 */
-#define MCFINT_UART2 15 /* Interrupt number for UART2 */
-#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
-
-/*
- * SDRAM configuration registers.
- */
-#ifdef CONFIG_M5271
-#define MCFSIM_DCR 0x40 /* SDRAM control */
-#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */
-#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */
-#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
-#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
-#endif
-#ifdef CONFIG_M5275
-#define MCFSIM_DMR 0x40 /* SDRAM mode */
-#define MCFSIM_DCR 0x44 /* SDRAM control */
-#define MCFSIM_DCFG1 0x48 /* SDRAM configuration 1 */
-#define MCFSIM_DCFG2 0x4c /* SDRAM configuration 2 */
-#define MCFSIM_DBAR0 0x50 /* SDRAM base address 0 */
-#define MCFSIM_DMR0 0x54 /* SDRAM address mask 0 */
-#define MCFSIM_DBAR1 0x58 /* SDRAM base address 1 */
-#define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */
-#endif
-
-/*
- * GPIO pins setups to enable the UARTs.
- */
-#ifdef CONFIG_M5271
-#define MCF_GPIO_PAR_UART 0x100048 /* PAR UART address */
-#define UART0_ENABLE_MASK 0x000f
-#define UART1_ENABLE_MASK 0x0ff0
-#define UART2_ENABLE_MASK 0x3000
-#endif
-#ifdef CONFIG_M5275
-#define MCF_GPIO_PAR_UART 0x10007c /* PAR UART address */
-#define UART0_ENABLE_MASK 0x000f
-#define UART1_ENABLE_MASK 0x00f0
-#define UART2_ENABLE_MASK 0x3f00
-#endif
-
-/****************************************************************************/
-#endif /* m527xsim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m528xsim.h -- ColdFire 5280/5282 System Integration Module support.
- *
- * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef m528xsim_h
-#define m528xsim_h
-/****************************************************************************/
-
-
-/*
- * Define the 5280/5282 SIM register set addresses.
- */
-#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */
-#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */
-#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
-#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
-#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
-#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
-#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
-#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
-#define MCFINTC_IRLR 0x18 /* */
-#define MCFINTC_IACKL 0x19 /* */
-#define MCFINTC_ICR0 0x40 /* Base ICR register */
-
-#define MCFINT_VECBASE 64 /* Vector base number */
-#define MCFINT_UART0 13 /* Interrupt number for UART0 */
-#define MCFINT_PIT1 55 /* Interrupt number for PIT1 */
-
-/*
- * SDRAM configuration registers.
- */
-#define MCFSIM_DCR 0x44 /* SDRAM control */
-#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */
-#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */
-#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
-#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
-
-/*
- * Derek Cheung - 6 Feb 2005
- * add I2C and QSPI register definition using Freescale's MCF5282
- */
-/* set Port AS pin for I2C or UART */
-#define MCF5282_GPIO_PASPAR (volatile u16 *) (MCF_IPSBAR + 0x00100056)
-
-/* Port UA Pin Assignment Register (8 Bit) */
-#define MCF5282_GPIO_PUAPAR 0x10005C
-
-/* Interrupt Mask Register Register Low */
-#define MCF5282_INTC0_IMRL (volatile u32 *) (MCF_IPSBAR + 0x0C0C)
-/* Interrupt Control Register 7 */
-#define MCF5282_INTC0_ICR17 (volatile u8 *) (MCF_IPSBAR + 0x0C51)
-
-
-
-/*********************************************************************
-*
-* Inter-IC (I2C) Module
-*
-*********************************************************************/
-/* Read/Write access macros for general use */
-#define MCF5282_I2C_I2ADR (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address
-#define MCF5282_I2C_I2FDR (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider
-#define MCF5282_I2C_I2CR (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control
-#define MCF5282_I2C_I2SR (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status
-#define MCF5282_I2C_I2DR (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O
-
-/* Bit level definitions and macros */
-#define MCF5282_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01)
-
-#define MCF5282_I2C_I2FDR_IC(x) (((x)&0x3F))
-
-#define MCF5282_I2C_I2CR_IEN (0x80) // I2C enable
-#define MCF5282_I2C_I2CR_IIEN (0x40) // interrupt enable
-#define MCF5282_I2C_I2CR_MSTA (0x20) // master/slave mode
-#define MCF5282_I2C_I2CR_MTX (0x10) // transmit/receive mode
-#define MCF5282_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable
-#define MCF5282_I2C_I2CR_RSTA (0x04) // repeat start
-
-#define MCF5282_I2C_I2SR_ICF (0x80) // data transfer bit
-#define MCF5282_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave
-#define MCF5282_I2C_I2SR_IBB (0x20) // I2C bus busy
-#define MCF5282_I2C_I2SR_IAL (0x10) // aribitration lost
-#define MCF5282_I2C_I2SR_SRW (0x04) // slave read/write
-#define MCF5282_I2C_I2SR_IIF (0x02) // I2C interrupt
-#define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge
-
-
-
-/*********************************************************************
-*
-* Queued Serial Peripheral Interface (QSPI) Module
-*
-*********************************************************************/
-/* Derek - 21 Feb 2005 */
-/* change to the format used in I2C */
-/* Read/Write access macros for general use */
-#define MCF5282_QSPI_QMR MCF_IPSBAR + 0x0340
-#define MCF5282_QSPI_QDLYR MCF_IPSBAR + 0x0344
-#define MCF5282_QSPI_QWR MCF_IPSBAR + 0x0348
-#define MCF5282_QSPI_QIR MCF_IPSBAR + 0x034C
-#define MCF5282_QSPI_QAR MCF_IPSBAR + 0x0350
-#define MCF5282_QSPI_QDR MCF_IPSBAR + 0x0354
-#define MCF5282_QSPI_QCR MCF_IPSBAR + 0x0354
-
-/* Bit level definitions and macros */
-#define MCF5282_QSPI_QMR_MSTR (0x8000)
-#define MCF5282_QSPI_QMR_DOHIE (0x4000)
-#define MCF5282_QSPI_QMR_BITS_16 (0x0000)
-#define MCF5282_QSPI_QMR_BITS_8 (0x2000)
-#define MCF5282_QSPI_QMR_BITS_9 (0x2400)
-#define MCF5282_QSPI_QMR_BITS_10 (0x2800)
-#define MCF5282_QSPI_QMR_BITS_11 (0x2C00)
-#define MCF5282_QSPI_QMR_BITS_12 (0x3000)
-#define MCF5282_QSPI_QMR_BITS_13 (0x3400)
-#define MCF5282_QSPI_QMR_BITS_14 (0x3800)
-#define MCF5282_QSPI_QMR_BITS_15 (0x3C00)
-#define MCF5282_QSPI_QMR_CPOL (0x0200)
-#define MCF5282_QSPI_QMR_CPHA (0x0100)
-#define MCF5282_QSPI_QMR_BAUD(x) (((x)&0x00FF))
-
-#define MCF5282_QSPI_QDLYR_SPE (0x80)
-#define MCF5282_QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8)
-#define MCF5282_QSPI_QDLYR_DTL(x) (((x)&0x00FF))
-
-#define MCF5282_QSPI_QWR_HALT (0x8000)
-#define MCF5282_QSPI_QWR_WREN (0x4000)
-#define MCF5282_QSPI_QWR_WRTO (0x2000)
-#define MCF5282_QSPI_QWR_CSIV (0x1000)
-#define MCF5282_QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8)
-#define MCF5282_QSPI_QWR_CPTQP(x) (((x)&0x000F)<<4)
-#define MCF5282_QSPI_QWR_NEWQP(x) (((x)&0x000F))
-
-#define MCF5282_QSPI_QIR_WCEFB (0x8000)
-#define MCF5282_QSPI_QIR_ABRTB (0x4000)
-#define MCF5282_QSPI_QIR_ABRTL (0x1000)
-#define MCF5282_QSPI_QIR_WCEFE (0x0800)
-#define MCF5282_QSPI_QIR_ABRTE (0x0400)
-#define MCF5282_QSPI_QIR_SPIFE (0x0100)
-#define MCF5282_QSPI_QIR_WCEF (0x0008)
-#define MCF5282_QSPI_QIR_ABRT (0x0004)
-#define MCF5282_QSPI_QIR_SPIF (0x0001)
-
-#define MCF5282_QSPI_QAR_ADDR(x) (((x)&0x003F))
-
-#define MCF5282_QSPI_QDR_COMMAND(x) (((x)&0xFF00))
-#define MCF5282_QSPI_QCR_DATA(x) (((x)&0x00FF)<<8)
-#define MCF5282_QSPI_QCR_CONT (0x8000)
-#define MCF5282_QSPI_QCR_BITSE (0x4000)
-#define MCF5282_QSPI_QCR_DT (0x2000)
-#define MCF5282_QSPI_QCR_DSCK (0x1000)
-#define MCF5282_QSPI_QCR_CS (((x)&0x000F)<<8)
-
-/****************************************************************************/
-#endif /* m528xsim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m5307sim.h -- ColdFire 5307 System Integration Module support.
- *
- * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd.
- * (C) Copyright 1999, Lineo (www.lineo.com)
- *
- * Modified by David W. Miller for the MCF5307 Eval Board.
- */
-
-/****************************************************************************/
-#ifndef m5307sim_h
-#define m5307sim_h
-/****************************************************************************/
-
-/*
- * Define the 5307 SIM register set addresses.
- */
-#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */
-#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/
-#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */
-#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */
-#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */
-#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */
-#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/
-#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/
-#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */
-#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */
-#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */
-#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */
-#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */
-#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */
-#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */
-#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */
-#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */
-#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */
-#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */
-#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */
-#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */
-#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */
-#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
-
-#ifdef CONFIG_OLDMASK
-#define MCFSIM_CSBAR 0x98 /* CS Base Address reg (r/w) */
-#define MCFSIM_CSBAMR 0x9c /* CS Base Mask reg (r/w) */
-#define MCFSIM_CSMR2 0x9e /* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
-#define MCFSIM_CSMR3 0xaa /* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
-#define MCFSIM_CSMR4 0xb6 /* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
-#define MCFSIM_CSMR5 0xc2 /* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */
-#define MCFSIM_CSMR6 0xce /* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */
-#define MCFSIM_CSMR7 0xda /* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
-#else
-#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */
-#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
-#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */
-#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */
-#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */
-#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */
-#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */
-#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
-#endif /* CONFIG_OLDMASK */
-
-#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */
-#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
-
-#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */
-#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */
-
-
-/* Definition offset address for CS2-7 -- old mask 5307 */
-
-#define MCF5307_CS2 (0x400000)
-#define MCF5307_CS3 (0x600000)
-#define MCF5307_CS4 (0x800000)
-#define MCF5307_CS5 (0xA00000)
-#define MCF5307_CS6 (0xC00000)
-#define MCF5307_CS7 (0xE00000)
-
-
-/*
- * Some symbol defines for the above...
- */
-#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
-#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
-#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
-#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
-#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
-#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
-#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
-#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
-#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
-
-#if defined(CONFIG_M5307)
-#define MCFSIM_IMR_MASKALL 0x3fffe /* All SIM intr sources */
-#endif
-
-/*
- * Macro to set IMR register. It is 32 bits on the 5307.
- */
-#define mcf_getimr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define mcf_setimr(imr) \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define mcf_getipr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-
-/*
- * Some symbol defines for the Parallel Port Pin Assignment Register
- */
-#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */
- /* Clear to select par I/O */
-#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */
- /* Clear to select par I/O */
-
-/*
- * Defines for the IRQPAR Register
- */
-#define IRQ5_LEVEL4 0x80
-#define IRQ3_LEVEL6 0x40
-#define IRQ1_LEVEL2 0x20
-
-
-/*
- * Define the Cache register flags.
- */
-#define CACR_EC (1<<31)
-#define CACR_ESB (1<<29)
-#define CACR_DPI (1<<28)
-#define CACR_HLCK (1<<27)
-#define CACR_CINVA (1<<24)
-#define CACR_DNFB (1<<10)
-#define CACR_DCM_WTHRU (0<<8)
-#define CACR_DCM_WBACK (1<<8)
-#define CACR_DCM_OFF_PRE (2<<8)
-#define CACR_DCM_OFF_IMP (3<<8)
-#define CACR_DW (1<<5)
-
-#define ACR_BASE_POS 24
-#define ACR_MASK_POS 16
-#define ACR_ENABLE (1<<15)
-#define ACR_USER (0<<13)
-#define ACR_SUPER (1<<13)
-#define ACR_ANY (2<<13)
-#define ACR_CM_WTHRU (0<<5)
-#define ACR_CM_WBACK (1<<5)
-#define ACR_CM_OFF_PRE (2<<5)
-#define ACR_CM_OFF_IMP (3<<5)
-#define ACR_WPROTECT (1<<2)
-
-/****************************************************************************/
-#endif /* m5307sim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m532xsim.h -- ColdFire 5329 registers
- */
-
-/****************************************************************************/
-#ifndef m532xsim_h
-#define m532xsim_h
-/****************************************************************************/
-
-#define MCF_REG32(x) (*(volatile unsigned long *)(x))
-#define MCF_REG16(x) (*(volatile unsigned short *)(x))
-#define MCF_REG08(x) (*(volatile unsigned char *)(x))
-
-#define MCFINT_VECBASE 64
-#define MCFINT_UART0 26 /* Interrupt number for UART0 */
-#define MCFINT_UART1 27 /* Interrupt number for UART1 */
-
-#define MCF_WTM_WCR MCF_REG16(0xFC098000)
-
-/*
- * Define the 532x SIM register set addresses.
- */
-#define MCFSIM_IPRL 0xFC048004
-#define MCFSIM_IPRH 0xFC048000
-#define MCFSIM_IPR MCFSIM_IPRL
-#define MCFSIM_IMRL 0xFC04800C
-#define MCFSIM_IMRH 0xFC048008
-#define MCFSIM_IMR MCFSIM_IMRL
-#define MCFSIM_ICR0 0xFC048040
-#define MCFSIM_ICR1 0xFC048041
-#define MCFSIM_ICR2 0xFC048042
-#define MCFSIM_ICR3 0xFC048043
-#define MCFSIM_ICR4 0xFC048044
-#define MCFSIM_ICR5 0xFC048045
-#define MCFSIM_ICR6 0xFC048046
-#define MCFSIM_ICR7 0xFC048047
-#define MCFSIM_ICR8 0xFC048048
-#define MCFSIM_ICR9 0xFC048049
-#define MCFSIM_ICR10 0xFC04804A
-#define MCFSIM_ICR11 0xFC04804B
-
-/*
- * Some symbol defines for the above...
- */
-#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
-#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
-#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
-#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
-#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
-#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
-#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
-#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
-#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
-
-
-#define MCFSIM_IMR_MASKALL 0xFFFFFFFF /* All SIM intr sources */
-
-#define MCFSIM_IMR_SIMR0 0xFC04801C
-#define MCFSIM_IMR_SIMR1 0xFC04C01C
-#define MCFSIM_IMR_CIMR0 0xFC04801D
-#define MCFSIM_IMR_CIMR1 0xFC04C01D
-
-#define MCFSIM_ICR_TIMER1 (0xFC048040+32)
-#define MCFSIM_ICR_TIMER2 (0xFC048040+33)
-
-
-/*
- * Macro to set IMR register. It is 32 bits on the 5307.
- */
-#define mcf_getimr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define mcf_setimr(imr) \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define mcf_getipr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-#define mcf_getiprl() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL))
-
-#define mcf_getiprh() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH))
-
-
-#define mcf_enable_irq0(irq) \
- *((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq);
-
-#define mcf_enable_irq1(irq) \
- *((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq);
-
-#define mcf_disable_irq0(irq) \
- *((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq);
-
-#define mcf_disable_irq1(irq) \
- *((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq);
-
-/*
- * Define the Cache register flags.
- */
-#define CACR_EC (1<<31)
-#define CACR_ESB (1<<29)
-#define CACR_DPI (1<<28)
-#define CACR_HLCK (1<<27)
-#define CACR_CINVA (1<<24)
-#define CACR_DNFB (1<<10)
-#define CACR_DCM_WTHRU (0<<8)
-#define CACR_DCM_WBACK (1<<8)
-#define CACR_DCM_OFF_PRE (2<<8)
-#define CACR_DCM_OFF_IMP (3<<8)
-#define CACR_DW (1<<5)
-
-#define ACR_BASE_POS 24
-#define ACR_MASK_POS 16
-#define ACR_ENABLE (1<<15)
-#define ACR_USER (0<<13)
-#define ACR_SUPER (1<<13)
-#define ACR_ANY (2<<13)
-#define ACR_CM_WTHRU (0<<5)
-#define ACR_CM_WBACK (1<<5)
-#define ACR_CM_OFF_PRE (2<<5)
-#define ACR_CM_OFF_IMP (3<<5)
-#define ACR_WPROTECT (1<<2)
-
-/*********************************************************************
- *
- * Inter-IC (I2C) Module
- *
- *********************************************************************/
-
-/* Read/Write access macros for general use */
-#define MCF532x_I2C_I2ADR (volatile u8 *) (0xFC058000) // Address
-#define MCF532x_I2C_I2FDR (volatile u8 *) (0xFC058004) // Freq Divider
-#define MCF532x_I2C_I2CR (volatile u8 *) (0xFC058008) // Control
-#define MCF532x_I2C_I2SR (volatile u8 *) (0xFC05800C) // Status
-#define MCF532x_I2C_I2DR (volatile u8 *) (0xFC058010) // Data I/O
-
-/* Bit level definitions and macros */
-#define MCF532x_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01)
-
-#define MCF532x_I2C_I2FDR_IC(x) (((x)&0x3F))
-
-#define MCF532x_I2C_I2CR_IEN (0x80) // I2C enable
-#define MCF532x_I2C_I2CR_IIEN (0x40) // interrupt enable
-#define MCF532x_I2C_I2CR_MSTA (0x20) // master/slave mode
-#define MCF532x_I2C_I2CR_MTX (0x10) // transmit/receive mode
-#define MCF532x_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable
-#define MCF532x_I2C_I2CR_RSTA (0x04) // repeat start
-
-#define MCF532x_I2C_I2SR_ICF (0x80) // data transfer bit
-#define MCF532x_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave
-#define MCF532x_I2C_I2SR_IBB (0x20) // I2C bus busy
-#define MCF532x_I2C_I2SR_IAL (0x10) // aribitration lost
-#define MCF532x_I2C_I2SR_SRW (0x04) // slave read/write
-#define MCF532x_I2C_I2SR_IIF (0x02) // I2C interrupt
-#define MCF532x_I2C_I2SR_RXAK (0x01) // received acknowledge
-
-#define MCF532x_PAR_FECI2C (volatile u8 *) (0xFC0A4053)
-
-
-/*
- * The M5329EVB board needs a help getting its devices initialized
- * at kernel start time if dBUG doesn't set it up (for example
- * it is not used), so we need to do it manually.
- */
-#ifdef __ASSEMBLER__
-.macro m5329EVB_setup
- movel #0xFC098000, %a7
- movel #0x0, (%a7)
-#define CORE_SRAM 0x80000000
-#define CORE_SRAM_SIZE 0x8000
- movel #CORE_SRAM, %d0
- addl #0x221, %d0
- movec %d0,%RAMBAR1
- movel #CORE_SRAM, %sp
- addl #CORE_SRAM_SIZE, %sp
- jsr sysinit
-.endm
-#define PLATFORM_SETUP m5329EVB_setup
-
-#endif /* __ASSEMBLER__ */
-
-/*********************************************************************
- *
- * Chip Configuration Module (CCM)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_CCM_CCR MCF_REG16(0xFC0A0004)
-#define MCF_CCM_RCON MCF_REG16(0xFC0A0008)
-#define MCF_CCM_CIR MCF_REG16(0xFC0A000A)
-#define MCF_CCM_MISCCR MCF_REG16(0xFC0A0010)
-#define MCF_CCM_CDR MCF_REG16(0xFC0A0012)
-#define MCF_CCM_UHCSR MCF_REG16(0xFC0A0014)
-#define MCF_CCM_UOCSR MCF_REG16(0xFC0A0016)
-
-/* Bit definitions and macros for MCF_CCM_CCR */
-#define MCF_CCM_CCR_RESERVED (0x0001)
-#define MCF_CCM_CCR_PLL_MODE (0x0003)
-#define MCF_CCM_CCR_OSC_MODE (0x0005)
-#define MCF_CCM_CCR_BOOTPS(x) (((x)&0x0003)<<3|0x0001)
-#define MCF_CCM_CCR_LOAD (0x0021)
-#define MCF_CCM_CCR_LIMP (0x0041)
-#define MCF_CCM_CCR_CSC(x) (((x)&0x0003)<<8|0x0001)
-
-/* Bit definitions and macros for MCF_CCM_RCON */
-#define MCF_CCM_RCON_RESERVED (0x0001)
-#define MCF_CCM_RCON_PLL_MODE (0x0003)
-#define MCF_CCM_RCON_OSC_MODE (0x0005)
-#define MCF_CCM_RCON_BOOTPS(x) (((x)&0x0003)<<3|0x0001)
-#define MCF_CCM_RCON_LOAD (0x0021)
-#define MCF_CCM_RCON_LIMP (0x0041)
-#define MCF_CCM_RCON_CSC(x) (((x)&0x0003)<<8|0x0001)
-
-/* Bit definitions and macros for MCF_CCM_CIR */
-#define MCF_CCM_CIR_PRN(x) (((x)&0x003F)<<0)
-#define MCF_CCM_CIR_PIN(x) (((x)&0x03FF)<<6)
-
-/* Bit definitions and macros for MCF_CCM_MISCCR */
-#define MCF_CCM_MISCCR_USBSRC (0x0001)
-#define MCF_CCM_MISCCR_USBDIV (0x0002)
-#define MCF_CCM_MISCCR_SSI_SRC (0x0010)
-#define MCF_CCM_MISCCR_TIM_DMA (0x0020)
-#define MCF_CCM_MISCCR_SSI_PUS (0x0040)
-#define MCF_CCM_MISCCR_SSI_PUE (0x0080)
-#define MCF_CCM_MISCCR_LCD_CHEN (0x0100)
-#define MCF_CCM_MISCCR_LIMP (0x1000)
-#define MCF_CCM_MISCCR_PLL_LOCK (0x2000)
-
-/* Bit definitions and macros for MCF_CCM_CDR */
-#define MCF_CCM_CDR_SSIDIV(x) (((x)&0x000F)<<0)
-#define MCF_CCM_CDR_LPDIV(x) (((x)&0x000F)<<8)
-
-/* Bit definitions and macros for MCF_CCM_UHCSR */
-#define MCF_CCM_UHCSR_XPDE (0x0001)
-#define MCF_CCM_UHCSR_UHMIE (0x0002)
-#define MCF_CCM_UHCSR_WKUP (0x0004)
-#define MCF_CCM_UHCSR_PORTIND(x) (((x)&0x0003)<<14)
-
-/* Bit definitions and macros for MCF_CCM_UOCSR */
-#define MCF_CCM_UOCSR_XPDE (0x0001)
-#define MCF_CCM_UOCSR_UOMIE (0x0002)
-#define MCF_CCM_UOCSR_WKUP (0x0004)
-#define MCF_CCM_UOCSR_PWRFLT (0x0008)
-#define MCF_CCM_UOCSR_SEND (0x0010)
-#define MCF_CCM_UOCSR_VVLD (0x0020)
-#define MCF_CCM_UOCSR_BVLD (0x0040)
-#define MCF_CCM_UOCSR_AVLD (0x0080)
-#define MCF_CCM_UOCSR_DPPU (0x0100)
-#define MCF_CCM_UOCSR_DCR_VBUS (0x0200)
-#define MCF_CCM_UOCSR_CRG_VBUS (0x0400)
-#define MCF_CCM_UOCSR_DRV_VBUS (0x0800)
-#define MCF_CCM_UOCSR_DMPD (0x1000)
-#define MCF_CCM_UOCSR_DPPD (0x2000)
-#define MCF_CCM_UOCSR_PORTIND(x) (((x)&0x0003)<<14)
-
-/*********************************************************************
- *
- * DMA Timers (DTIM)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_DTIM0_DTMR MCF_REG16(0xFC070000)
-#define MCF_DTIM0_DTXMR MCF_REG08(0xFC070002)
-#define MCF_DTIM0_DTER MCF_REG08(0xFC070003)
-#define MCF_DTIM0_DTRR MCF_REG32(0xFC070004)
-#define MCF_DTIM0_DTCR MCF_REG32(0xFC070008)
-#define MCF_DTIM0_DTCN MCF_REG32(0xFC07000C)
-#define MCF_DTIM1_DTMR MCF_REG16(0xFC074000)
-#define MCF_DTIM1_DTXMR MCF_REG08(0xFC074002)
-#define MCF_DTIM1_DTER MCF_REG08(0xFC074003)
-#define MCF_DTIM1_DTRR MCF_REG32(0xFC074004)
-#define MCF_DTIM1_DTCR MCF_REG32(0xFC074008)
-#define MCF_DTIM1_DTCN MCF_REG32(0xFC07400C)
-#define MCF_DTIM2_DTMR MCF_REG16(0xFC078000)
-#define MCF_DTIM2_DTXMR MCF_REG08(0xFC078002)
-#define MCF_DTIM2_DTER MCF_REG08(0xFC078003)
-#define MCF_DTIM2_DTRR MCF_REG32(0xFC078004)
-#define MCF_DTIM2_DTCR MCF_REG32(0xFC078008)
-#define MCF_DTIM2_DTCN MCF_REG32(0xFC07800C)
-#define MCF_DTIM3_DTMR MCF_REG16(0xFC07C000)
-#define MCF_DTIM3_DTXMR MCF_REG08(0xFC07C002)
-#define MCF_DTIM3_DTER MCF_REG08(0xFC07C003)
-#define MCF_DTIM3_DTRR MCF_REG32(0xFC07C004)
-#define MCF_DTIM3_DTCR MCF_REG32(0xFC07C008)
-#define MCF_DTIM3_DTCN MCF_REG32(0xFC07C00C)
-#define MCF_DTIM_DTMR(x) MCF_REG16(0xFC070000+((x)*0x4000))
-#define MCF_DTIM_DTXMR(x) MCF_REG08(0xFC070002+((x)*0x4000))
-#define MCF_DTIM_DTER(x) MCF_REG08(0xFC070003+((x)*0x4000))
-#define MCF_DTIM_DTRR(x) MCF_REG32(0xFC070004+((x)*0x4000))
-#define MCF_DTIM_DTCR(x) MCF_REG32(0xFC070008+((x)*0x4000))
-#define MCF_DTIM_DTCN(x) MCF_REG32(0xFC07000C+((x)*0x4000))
-
-/* Bit definitions and macros for MCF_DTIM_DTMR */
-#define MCF_DTIM_DTMR_RST (0x0001)
-#define MCF_DTIM_DTMR_CLK(x) (((x)&0x0003)<<1)
-#define MCF_DTIM_DTMR_FRR (0x0008)
-#define MCF_DTIM_DTMR_ORRI (0x0010)
-#define MCF_DTIM_DTMR_OM (0x0020)
-#define MCF_DTIM_DTMR_CE(x) (((x)&0x0003)<<6)
-#define MCF_DTIM_DTMR_PS(x) (((x)&0x00FF)<<8)
-#define MCF_DTIM_DTMR_CE_ANY (0x00C0)
-#define MCF_DTIM_DTMR_CE_FALL (0x0080)
-#define MCF_DTIM_DTMR_CE_RISE (0x0040)
-#define MCF_DTIM_DTMR_CE_NONE (0x0000)
-#define MCF_DTIM_DTMR_CLK_DTIN (0x0006)
-#define MCF_DTIM_DTMR_CLK_DIV16 (0x0004)
-#define MCF_DTIM_DTMR_CLK_DIV1 (0x0002)
-#define MCF_DTIM_DTMR_CLK_STOP (0x0000)
-
-/* Bit definitions and macros for MCF_DTIM_DTXMR */
-#define MCF_DTIM_DTXMR_MODE16 (0x01)
-#define MCF_DTIM_DTXMR_DMAEN (0x80)
-
-/* Bit definitions and macros for MCF_DTIM_DTER */
-#define MCF_DTIM_DTER_CAP (0x01)
-#define MCF_DTIM_DTER_REF (0x02)
-
-/* Bit definitions and macros for MCF_DTIM_DTRR */
-#define MCF_DTIM_DTRR_REF(x) (((x)&0xFFFFFFFF)<<0)
-
-/* Bit definitions and macros for MCF_DTIM_DTCR */
-#define MCF_DTIM_DTCR_CAP(x) (((x)&0xFFFFFFFF)<<0)
-
-/* Bit definitions and macros for MCF_DTIM_DTCN */
-#define MCF_DTIM_DTCN_CNT(x) (((x)&0xFFFFFFFF)<<0)
-
-/*********************************************************************
- *
- * FlexBus Chip Selects (FBCS)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_FBCS0_CSAR MCF_REG32(0xFC008000)
-#define MCF_FBCS0_CSMR MCF_REG32(0xFC008004)
-#define MCF_FBCS0_CSCR MCF_REG32(0xFC008008)
-#define MCF_FBCS1_CSAR MCF_REG32(0xFC00800C)
-#define MCF_FBCS1_CSMR MCF_REG32(0xFC008010)
-#define MCF_FBCS1_CSCR MCF_REG32(0xFC008014)
-#define MCF_FBCS2_CSAR MCF_REG32(0xFC008018)
-#define MCF_FBCS2_CSMR MCF_REG32(0xFC00801C)
-#define MCF_FBCS2_CSCR MCF_REG32(0xFC008020)
-#define MCF_FBCS3_CSAR MCF_REG32(0xFC008024)
-#define MCF_FBCS3_CSMR MCF_REG32(0xFC008028)
-#define MCF_FBCS3_CSCR MCF_REG32(0xFC00802C)
-#define MCF_FBCS4_CSAR MCF_REG32(0xFC008030)
-#define MCF_FBCS4_CSMR MCF_REG32(0xFC008034)
-#define MCF_FBCS4_CSCR MCF_REG32(0xFC008038)
-#define MCF_FBCS5_CSAR MCF_REG32(0xFC00803C)
-#define MCF_FBCS5_CSMR MCF_REG32(0xFC008040)
-#define MCF_FBCS5_CSCR MCF_REG32(0xFC008044)
-#define MCF_FBCS_CSAR(x) MCF_REG32(0xFC008000+((x)*0x00C))
-#define MCF_FBCS_CSMR(x) MCF_REG32(0xFC008004+((x)*0x00C))
-#define MCF_FBCS_CSCR(x) MCF_REG32(0xFC008008+((x)*0x00C))
-
-/* Bit definitions and macros for MCF_FBCS_CSAR */
-#define MCF_FBCS_CSAR_BA(x) ((x)&0xFFFF0000)
-
-/* Bit definitions and macros for MCF_FBCS_CSMR */
-#define MCF_FBCS_CSMR_V (0x00000001)
-#define MCF_FBCS_CSMR_WP (0x00000100)
-#define MCF_FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16)
-#define MCF_FBCS_CSMR_BAM_4G (0xFFFF0000)
-#define MCF_FBCS_CSMR_BAM_2G (0x7FFF0000)
-#define MCF_FBCS_CSMR_BAM_1G (0x3FFF0000)
-#define MCF_FBCS_CSMR_BAM_1024M (0x3FFF0000)
-#define MCF_FBCS_CSMR_BAM_512M (0x1FFF0000)
-#define MCF_FBCS_CSMR_BAM_256M (0x0FFF0000)
-#define MCF_FBCS_CSMR_BAM_128M (0x07FF0000)
-#define MCF_FBCS_CSMR_BAM_64M (0x03FF0000)
-#define MCF_FBCS_CSMR_BAM_32M (0x01FF0000)
-#define MCF_FBCS_CSMR_BAM_16M (0x00FF0000)
-#define MCF_FBCS_CSMR_BAM_8M (0x007F0000)
-#define MCF_FBCS_CSMR_BAM_4M (0x003F0000)
-#define MCF_FBCS_CSMR_BAM_2M (0x001F0000)
-#define MCF_FBCS_CSMR_BAM_1M (0x000F0000)
-#define MCF_FBCS_CSMR_BAM_1024K (0x000F0000)
-#define MCF_FBCS_CSMR_BAM_512K (0x00070000)
-#define MCF_FBCS_CSMR_BAM_256K (0x00030000)
-#define MCF_FBCS_CSMR_BAM_128K (0x00010000)
-#define MCF_FBCS_CSMR_BAM_64K (0x00000000)
-
-/* Bit definitions and macros for MCF_FBCS_CSCR */
-#define MCF_FBCS_CSCR_BSTW (0x00000008)
-#define MCF_FBCS_CSCR_BSTR (0x00000010)
-#define MCF_FBCS_CSCR_BEM (0x00000020)
-#define MCF_FBCS_CSCR_PS(x) (((x)&0x00000003)<<6)
-#define MCF_FBCS_CSCR_AA (0x00000100)
-#define MCF_FBCS_CSCR_SBM (0x00000200)
-#define MCF_FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10)
-#define MCF_FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16)
-#define MCF_FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18)
-#define MCF_FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20)
-#define MCF_FBCS_CSCR_SWSEN (0x00800000)
-#define MCF_FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26)
-#define MCF_FBCS_CSCR_PS_8 (0x0040)
-#define MCF_FBCS_CSCR_PS_16 (0x0080)
-#define MCF_FBCS_CSCR_PS_32 (0x0000)
-
-/*********************************************************************
- *
- * General Purpose I/O (GPIO)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_GPIO_PODR_FECH MCF_REG08(0xFC0A4000)
-#define MCF_GPIO_PODR_FECL MCF_REG08(0xFC0A4001)
-#define MCF_GPIO_PODR_SSI MCF_REG08(0xFC0A4002)
-#define MCF_GPIO_PODR_BUSCTL MCF_REG08(0xFC0A4003)
-#define MCF_GPIO_PODR_BE MCF_REG08(0xFC0A4004)
-#define MCF_GPIO_PODR_CS MCF_REG08(0xFC0A4005)
-#define MCF_GPIO_PODR_PWM MCF_REG08(0xFC0A4006)
-#define MCF_GPIO_PODR_FECI2C MCF_REG08(0xFC0A4007)
-#define MCF_GPIO_PODR_UART MCF_REG08(0xFC0A4009)
-#define MCF_GPIO_PODR_QSPI MCF_REG08(0xFC0A400A)
-#define MCF_GPIO_PODR_TIMER MCF_REG08(0xFC0A400B)
-#define MCF_GPIO_PODR_LCDDATAH MCF_REG08(0xFC0A400D)
-#define MCF_GPIO_PODR_LCDDATAM MCF_REG08(0xFC0A400E)
-#define MCF_GPIO_PODR_LCDDATAL MCF_REG08(0xFC0A400F)
-#define MCF_GPIO_PODR_LCDCTLH MCF_REG08(0xFC0A4010)
-#define MCF_GPIO_PODR_LCDCTLL MCF_REG08(0xFC0A4011)
-#define MCF_GPIO_PDDR_FECH MCF_REG08(0xFC0A4014)
-#define MCF_GPIO_PDDR_FECL MCF_REG08(0xFC0A4015)
-#define MCF_GPIO_PDDR_SSI MCF_REG08(0xFC0A4016)
-#define MCF_GPIO_PDDR_BUSCTL MCF_REG08(0xFC0A4017)
-#define MCF_GPIO_PDDR_BE MCF_REG08(0xFC0A4018)
-#define MCF_GPIO_PDDR_CS MCF_REG08(0xFC0A4019)
-#define MCF_GPIO_PDDR_PWM MCF_REG08(0xFC0A401A)
-#define MCF_GPIO_PDDR_FECI2C MCF_REG08(0xFC0A401B)
-#define MCF_GPIO_PDDR_UART MCF_REG08(0xFC0A401C)
-#define MCF_GPIO_PDDR_QSPI MCF_REG08(0xFC0A401E)
-#define MCF_GPIO_PDDR_TIMER MCF_REG08(0xFC0A401F)
-#define MCF_GPIO_PDDR_LCDDATAH MCF_REG08(0xFC0A4021)
-#define MCF_GPIO_PDDR_LCDDATAM MCF_REG08(0xFC0A4022)
-#define MCF_GPIO_PDDR_LCDDATAL MCF_REG08(0xFC0A4023)
-#define MCF_GPIO_PDDR_LCDCTLH MCF_REG08(0xFC0A4024)
-#define MCF_GPIO_PDDR_LCDCTLL MCF_REG08(0xFC0A4025)
-#define MCF_GPIO_PPDSDR_FECH MCF_REG08(0xFC0A4028)
-#define MCF_GPIO_PPDSDR_FECL MCF_REG08(0xFC0A4029)
-#define MCF_GPIO_PPDSDR_SSI MCF_REG08(0xFC0A402A)
-#define MCF_GPIO_PPDSDR_BUSCTL MCF_REG08(0xFC0A402B)
-#define MCF_GPIO_PPDSDR_BE MCF_REG08(0xFC0A402C)
-#define MCF_GPIO_PPDSDR_CS MCF_REG08(0xFC0A402D)
-#define MCF_GPIO_PPDSDR_PWM MCF_REG08(0xFC0A402E)
-#define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0xFC0A402F)
-#define MCF_GPIO_PPDSDR_UART MCF_REG08(0xFC0A4031)
-#define MCF_GPIO_PPDSDR_QSPI MCF_REG08(0xFC0A4032)
-#define MCF_GPIO_PPDSDR_TIMER MCF_REG08(0xFC0A4033)
-#define MCF_GPIO_PPDSDR_LCDDATAH MCF_REG08(0xFC0A4035)
-#define MCF_GPIO_PPDSDR_LCDDATAM MCF_REG08(0xFC0A4036)
-#define MCF_GPIO_PPDSDR_LCDDATAL MCF_REG08(0xFC0A4037)
-#define MCF_GPIO_PPDSDR_LCDCTLH MCF_REG08(0xFC0A4038)
-#define MCF_GPIO_PPDSDR_LCDCTLL MCF_REG08(0xFC0A4039)
-#define MCF_GPIO_PCLRR_FECH MCF_REG08(0xFC0A403C)
-#define MCF_GPIO_PCLRR_FECL MCF_REG08(0xFC0A403D)
-#define MCF_GPIO_PCLRR_SSI MCF_REG08(0xFC0A403E)
-#define MCF_GPIO_PCLRR_BUSCTL MCF_REG08(0xFC0A403F)
-#define MCF_GPIO_PCLRR_BE MCF_REG08(0xFC0A4040)
-#define MCF_GPIO_PCLRR_CS MCF_REG08(0xFC0A4041)
-#define MCF_GPIO_PCLRR_PWM MCF_REG08(0xFC0A4042)
-#define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0xFC0A4043)
-#define MCF_GPIO_PCLRR_UART MCF_REG08(0xFC0A4045)
-#define MCF_GPIO_PCLRR_QSPI MCF_REG08(0xFC0A4046)
-#define MCF_GPIO_PCLRR_TIMER MCF_REG08(0xFC0A4047)
-#define MCF_GPIO_PCLRR_LCDDATAH MCF_REG08(0xFC0A4049)
-#define MCF_GPIO_PCLRR_LCDDATAM MCF_REG08(0xFC0A404A)
-#define MCF_GPIO_PCLRR_LCDDATAL MCF_REG08(0xFC0A404B)
-#define MCF_GPIO_PCLRR_LCDCTLH MCF_REG08(0xFC0A404C)
-#define MCF_GPIO_PCLRR_LCDCTLL MCF_REG08(0xFC0A404D)
-#define MCF_GPIO_PAR_FEC MCF_REG08(0xFC0A4050)
-#define MCF_GPIO_PAR_PWM MCF_REG08(0xFC0A4051)
-#define MCF_GPIO_PAR_BUSCTL MCF_REG08(0xFC0A4052)
-#define MCF_GPIO_PAR_FECI2C MCF_REG08(0xFC0A4053)
-#define MCF_GPIO_PAR_BE MCF_REG08(0xFC0A4054)
-#define MCF_GPIO_PAR_CS MCF_REG08(0xFC0A4055)
-#define MCF_GPIO_PAR_SSI MCF_REG16(0xFC0A4056)
-#define MCF_GPIO_PAR_UART MCF_REG16(0xFC0A4058)
-#define MCF_GPIO_PAR_QSPI MCF_REG16(0xFC0A405A)
-#define MCF_GPIO_PAR_TIMER MCF_REG08(0xFC0A405C)
-#define MCF_GPIO_PAR_LCDDATA MCF_REG08(0xFC0A405D)
-#define MCF_GPIO_PAR_LCDCTL MCF_REG16(0xFC0A405E)
-#define MCF_GPIO_PAR_IRQ MCF_REG16(0xFC0A4060)
-#define MCF_GPIO_MSCR_FLEXBUS MCF_REG08(0xFC0A4064)
-#define MCF_GPIO_MSCR_SDRAM MCF_REG08(0xFC0A4065)
-#define MCF_GPIO_DSCR_I2C MCF_REG08(0xFC0A4068)
-#define MCF_GPIO_DSCR_PWM MCF_REG08(0xFC0A4069)
-#define MCF_GPIO_DSCR_FEC MCF_REG08(0xFC0A406A)
-#define MCF_GPIO_DSCR_UART MCF_REG08(0xFC0A406B)
-#define MCF_GPIO_DSCR_QSPI MCF_REG08(0xFC0A406C)
-#define MCF_GPIO_DSCR_TIMER MCF_REG08(0xFC0A406D)
-#define MCF_GPIO_DSCR_SSI MCF_REG08(0xFC0A406E)
-#define MCF_GPIO_DSCR_LCD MCF_REG08(0xFC0A406F)
-#define MCF_GPIO_DSCR_DEBUG MCF_REG08(0xFC0A4070)
-#define MCF_GPIO_DSCR_CLKRST MCF_REG08(0xFC0A4071)
-#define MCF_GPIO_DSCR_IRQ MCF_REG08(0xFC0A4072)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_FECH */
-#define MCF_GPIO_PODR_FECH_PODR_FECH0 (0x01)
-#define MCF_GPIO_PODR_FECH_PODR_FECH1 (0x02)
-#define MCF_GPIO_PODR_FECH_PODR_FECH2 (0x04)
-#define MCF_GPIO_PODR_FECH_PODR_FECH3 (0x08)
-#define MCF_GPIO_PODR_FECH_PODR_FECH4 (0x10)
-#define MCF_GPIO_PODR_FECH_PODR_FECH5 (0x20)
-#define MCF_GPIO_PODR_FECH_PODR_FECH6 (0x40)
-#define MCF_GPIO_PODR_FECH_PODR_FECH7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_FECL */
-#define MCF_GPIO_PODR_FECL_PODR_FECL0 (0x01)
-#define MCF_GPIO_PODR_FECL_PODR_FECL1 (0x02)
-#define MCF_GPIO_PODR_FECL_PODR_FECL2 (0x04)
-#define MCF_GPIO_PODR_FECL_PODR_FECL3 (0x08)
-#define MCF_GPIO_PODR_FECL_PODR_FECL4 (0x10)
-#define MCF_GPIO_PODR_FECL_PODR_FECL5 (0x20)
-#define MCF_GPIO_PODR_FECL_PODR_FECL6 (0x40)
-#define MCF_GPIO_PODR_FECL_PODR_FECL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_SSI */
-#define MCF_GPIO_PODR_SSI_PODR_SSI0 (0x01)
-#define MCF_GPIO_PODR_SSI_PODR_SSI1 (0x02)
-#define MCF_GPIO_PODR_SSI_PODR_SSI2 (0x04)
-#define MCF_GPIO_PODR_SSI_PODR_SSI3 (0x08)
-#define MCF_GPIO_PODR_SSI_PODR_SSI4 (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_BUSCTL */
-#define MCF_GPIO_PODR_BUSCTL_POSDR_BUSCTL0 (0x01)
-#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL1 (0x02)
-#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL2 (0x04)
-#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_BE */
-#define MCF_GPIO_PODR_BE_PODR_BE0 (0x01)
-#define MCF_GPIO_PODR_BE_PODR_BE1 (0x02)
-#define MCF_GPIO_PODR_BE_PODR_BE2 (0x04)
-#define MCF_GPIO_PODR_BE_PODR_BE3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_CS */
-#define MCF_GPIO_PODR_CS_PODR_CS1 (0x02)
-#define MCF_GPIO_PODR_CS_PODR_CS2 (0x04)
-#define MCF_GPIO_PODR_CS_PODR_CS3 (0x08)
-#define MCF_GPIO_PODR_CS_PODR_CS4 (0x10)
-#define MCF_GPIO_PODR_CS_PODR_CS5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_PWM */
-#define MCF_GPIO_PODR_PWM_PODR_PWM2 (0x04)
-#define MCF_GPIO_PODR_PWM_PODR_PWM3 (0x08)
-#define MCF_GPIO_PODR_PWM_PODR_PWM4 (0x10)
-#define MCF_GPIO_PODR_PWM_PODR_PWM5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C0 (0x01)
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C1 (0x02)
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C2 (0x04)
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_UART */
-#define MCF_GPIO_PODR_UART_PODR_UART0 (0x01)
-#define MCF_GPIO_PODR_UART_PODR_UART1 (0x02)
-#define MCF_GPIO_PODR_UART_PODR_UART2 (0x04)
-#define MCF_GPIO_PODR_UART_PODR_UART3 (0x08)
-#define MCF_GPIO_PODR_UART_PODR_UART4 (0x10)
-#define MCF_GPIO_PODR_UART_PODR_UART5 (0x20)
-#define MCF_GPIO_PODR_UART_PODR_UART6 (0x40)
-#define MCF_GPIO_PODR_UART_PODR_UART7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_QSPI */
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI0 (0x01)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI1 (0x02)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI2 (0x04)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI3 (0x08)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI4 (0x10)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_TIMER */
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER0 (0x01)
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER1 (0x02)
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER2 (0x04)
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAH */
-#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH0 (0x01)
-#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH1 (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAM */
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM0 (0x01)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM1 (0x02)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM2 (0x04)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM3 (0x08)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM4 (0x10)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM5 (0x20)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM6 (0x40)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAL */
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL0 (0x01)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL1 (0x02)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL2 (0x04)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL3 (0x08)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL4 (0x10)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL5 (0x20)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL6 (0x40)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLH */
-#define MCF_GPIO_PODR_LCDCTLH_PODR_LCDCTLH0 (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLL */
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL0 (0x01)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL1 (0x02)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL2 (0x04)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL3 (0x08)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL4 (0x10)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL5 (0x20)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL6 (0x40)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_FECH */
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH0 (0x01)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH1 (0x02)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH2 (0x04)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH3 (0x08)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH4 (0x10)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH5 (0x20)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH6 (0x40)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_FECL */
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL0 (0x01)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL1 (0x02)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL2 (0x04)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL3 (0x08)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL4 (0x10)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL5 (0x20)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL6 (0x40)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_SSI */
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI0 (0x01)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI1 (0x02)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI2 (0x04)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI3 (0x08)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI4 (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_BUSCTL */
-#define MCF_GPIO_PDDR_BUSCTL_POSDR_BUSCTL0 (0x01)
-#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL1 (0x02)
-#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL2 (0x04)
-#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_BE */
-#define MCF_GPIO_PDDR_BE_PDDR_BE0 (0x01)
-#define MCF_GPIO_PDDR_BE_PDDR_BE1 (0x02)
-#define MCF_GPIO_PDDR_BE_PDDR_BE2 (0x04)
-#define MCF_GPIO_PDDR_BE_PDDR_BE3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_CS */
-#define MCF_GPIO_PDDR_CS_PDDR_CS1 (0x02)
-#define MCF_GPIO_PDDR_CS_PDDR_CS2 (0x04)
-#define MCF_GPIO_PDDR_CS_PDDR_CS3 (0x08)
-#define MCF_GPIO_PDDR_CS_PDDR_CS4 (0x10)
-#define MCF_GPIO_PDDR_CS_PDDR_CS5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_PWM */
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM2 (0x04)
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM3 (0x08)
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM4 (0x10)
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C0 (0x01)
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C1 (0x02)
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C2 (0x04)
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_UART */
-#define MCF_GPIO_PDDR_UART_PDDR_UART0 (0x01)
-#define MCF_GPIO_PDDR_UART_PDDR_UART1 (0x02)
-#define MCF_GPIO_PDDR_UART_PDDR_UART2 (0x04)
-#define MCF_GPIO_PDDR_UART_PDDR_UART3 (0x08)
-#define MCF_GPIO_PDDR_UART_PDDR_UART4 (0x10)
-#define MCF_GPIO_PDDR_UART_PDDR_UART5 (0x20)
-#define MCF_GPIO_PDDR_UART_PDDR_UART6 (0x40)
-#define MCF_GPIO_PDDR_UART_PDDR_UART7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_QSPI */
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI0 (0x01)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI1 (0x02)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI2 (0x04)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI3 (0x08)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI4 (0x10)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_TIMER */
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER0 (0x01)
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER1 (0x02)
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER2 (0x04)
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAH */
-#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH0 (0x01)
-#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH1 (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAM */
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM0 (0x01)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM1 (0x02)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM2 (0x04)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM3 (0x08)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM4 (0x10)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM5 (0x20)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM6 (0x40)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAL */
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL0 (0x01)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL1 (0x02)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL2 (0x04)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL3 (0x08)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL4 (0x10)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL5 (0x20)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL6 (0x40)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLH */
-#define MCF_GPIO_PDDR_LCDCTLH_PDDR_LCDCTLH0 (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLL */
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL0 (0x01)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL1 (0x02)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL2 (0x04)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL3 (0x08)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL4 (0x10)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL5 (0x20)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL6 (0x40)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECH */
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH0 (0x01)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH1 (0x02)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH2 (0x04)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH3 (0x08)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH4 (0x10)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH5 (0x20)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH6 (0x40)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECL */
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL0 (0x01)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL1 (0x02)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL2 (0x04)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL3 (0x08)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL4 (0x10)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL5 (0x20)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL6 (0x40)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_SSI */
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI0 (0x01)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI1 (0x02)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI2 (0x04)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI3 (0x08)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI4 (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_BUSCTL */
-#define MCF_GPIO_PPDSDR_BUSCTL_POSDR_BUSCTL0 (0x01)
-#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL1 (0x02)
-#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL2 (0x04)
-#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_BE */
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE0 (0x01)
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE1 (0x02)
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE2 (0x04)
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_CS */
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS1 (0x02)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS2 (0x04)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS3 (0x08)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS4 (0x10)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_PWM */
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM2 (0x04)
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM3 (0x08)
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM4 (0x10)
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C0 (0x01)
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C1 (0x02)
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C2 (0x04)
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_UART */
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART0 (0x01)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART1 (0x02)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART2 (0x04)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART3 (0x08)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART4 (0x10)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART5 (0x20)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART6 (0x40)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_QSPI */
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI0 (0x01)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI1 (0x02)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI2 (0x04)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI3 (0x08)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI4 (0x10)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_TIMER */
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER0 (0x01)
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER1 (0x02)
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER2 (0x04)
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAH */
-#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH0 (0x01)
-#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH1 (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAM */
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM0 (0x01)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM1 (0x02)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM2 (0x04)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM3 (0x08)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM4 (0x10)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM5 (0x20)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM6 (0x40)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAL */
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL0 (0x01)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL1 (0x02)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL2 (0x04)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL3 (0x08)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL4 (0x10)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL5 (0x20)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL6 (0x40)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLH */
-#define MCF_GPIO_PPDSDR_LCDCTLH_PPDSDR_LCDCTLH0 (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLL */
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL0 (0x01)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL1 (0x02)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL2 (0x04)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL3 (0x08)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL4 (0x10)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL5 (0x20)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL6 (0x40)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_FECH */
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH0 (0x01)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH1 (0x02)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH2 (0x04)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH3 (0x08)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH4 (0x10)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH5 (0x20)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH6 (0x40)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_FECL */
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL0 (0x01)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL1 (0x02)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL2 (0x04)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL3 (0x08)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL4 (0x10)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL5 (0x20)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL6 (0x40)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_SSI */
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI0 (0x01)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI1 (0x02)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI2 (0x04)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI3 (0x08)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI4 (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_BUSCTL */
-#define MCF_GPIO_PCLRR_BUSCTL_POSDR_BUSCTL0 (0x01)
-#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL1 (0x02)
-#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL2 (0x04)
-#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_BE */
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE0 (0x01)
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE1 (0x02)
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE2 (0x04)
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_CS */
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS1 (0x02)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS2 (0x04)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS3 (0x08)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS4 (0x10)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_PWM */
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM2 (0x04)
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM3 (0x08)
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM4 (0x10)
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C0 (0x01)
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C1 (0x02)
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C2 (0x04)
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_UART */
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART0 (0x01)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART1 (0x02)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART2 (0x04)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART3 (0x08)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART4 (0x10)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART5 (0x20)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART6 (0x40)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_QSPI */
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI0 (0x01)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI1 (0x02)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI2 (0x04)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI3 (0x08)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI4 (0x10)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI5 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_TIMER */
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER0 (0x01)
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER1 (0x02)
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER2 (0x04)
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAH */
-#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH0 (0x01)
-#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH1 (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAM */
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM0 (0x01)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM1 (0x02)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM2 (0x04)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM3 (0x08)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM4 (0x10)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM5 (0x20)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM6 (0x40)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAL */
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL0 (0x01)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL1 (0x02)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL2 (0x04)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL3 (0x08)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL4 (0x10)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL5 (0x20)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL6 (0x40)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLH */
-#define MCF_GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0 (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLL */
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL0 (0x01)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL1 (0x02)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL2 (0x04)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL3 (0x08)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL4 (0x10)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL5 (0x20)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL6 (0x40)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL7 (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_FEC */
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII(x) (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W(x) (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_GPIO (0x00)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_URTS1 (0x04)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC (0x0C)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_GPIO (0x00)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_UART (0x01)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_PWM */
-#define MCF_GPIO_PAR_PWM_PAR_PWM1(x) (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_PWM_PAR_PWM3(x) (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_PWM_PAR_PWM5 (0x10)
-#define MCF_GPIO_PAR_PWM_PAR_PWM7 (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_BUSCTL */
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS(x) (((x)&0x03)<<3)
-#define MCF_GPIO_PAR_BUSCTL_PAR_RWB (0x20)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TA (0x40)
-#define MCF_GPIO_PAR_BUSCTL_PAR_OE (0x80)
-#define MCF_GPIO_PAR_BUSCTL_PAR_OE_GPIO (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_OE_OE (0x80)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TA_GPIO (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TA_TA (0x40)
-#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_GPIO (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_RWB (0x20)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS_GPIO (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS_DACK0 (0x10)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS_TS (0x18)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_FECI2C */
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x) (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x) (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO(x) (((x)&0x03)<<4)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC(x) (((x)&0x03)<<6)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_GPIO (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_UTXD2 (0x40)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_SCL (0x80)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC (0xC0)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_GPIO (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_URXD2 (0x10)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_SDA (0x20)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO (0x30)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_GPIO (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_SCL (0x0C)
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_GPIO (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02)
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_SDA (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_BE */
-#define MCF_GPIO_PAR_BE_PAR_BE0 (0x01)
-#define MCF_GPIO_PAR_BE_PAR_BE1 (0x02)
-#define MCF_GPIO_PAR_BE_PAR_BE2 (0x04)
-#define MCF_GPIO_PAR_BE_PAR_BE3 (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_CS */
-#define MCF_GPIO_PAR_CS_PAR_CS1 (0x02)
-#define MCF_GPIO_PAR_CS_PAR_CS2 (0x04)
-#define MCF_GPIO_PAR_CS_PAR_CS3 (0x08)
-#define MCF_GPIO_PAR_CS_PAR_CS4 (0x10)
-#define MCF_GPIO_PAR_CS_PAR_CS5 (0x20)
-#define MCF_GPIO_PAR_CS_PAR_CS_CS1_GPIO (0x00)
-#define MCF_GPIO_PAR_CS_PAR_CS_CS1_SDCS1 (0x01)
-#define MCF_GPIO_PAR_CS_PAR_CS_CS1_CS1 (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_SSI */
-#define MCF_GPIO_PAR_SSI_PAR_MCLK (0x0080)
-#define MCF_GPIO_PAR_SSI_PAR_TXD(x) (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_SSI_PAR_RXD(x) (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_SSI_PAR_FS(x) (((x)&0x0003)<<12)
-#define MCF_GPIO_PAR_SSI_PAR_BCLK(x) (((x)&0x0003)<<14)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_UART */
-#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0001)
-#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0002)
-#define MCF_GPIO_PAR_UART_PAR_URTS0 (0x0004)
-#define MCF_GPIO_PAR_UART_PAR_UCTS0 (0x0008)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1(x) (((x)&0x0003)<<4)
-#define MCF_GPIO_PAR_UART_PAR_URXD1(x) (((x)&0x0003)<<6)
-#define MCF_GPIO_PAR_UART_PAR_URTS1(x) (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1(x) (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_GPIO (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_SSI_BCLK (0x0800)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_ULPI_D7 (0x0400)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_UCTS1 (0x0C00)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_GPIO (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_SSI_FS (0x0200)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_ULPI_D6 (0x0100)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_URTS1 (0x0300)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_GPIO (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_SSI_RXD (0x0080)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_ULPI_D5 (0x0040)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_URXD1 (0x00C0)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_GPIO (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_SSI_TXD (0x0020)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_ULPI_D4 (0x0010)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_UTXD1 (0x0030)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_QSPI */
-#define MCF_GPIO_PAR_QSPI_PAR_SCK(x) (((x)&0x0003)<<4)
-#define MCF_GPIO_PAR_QSPI_PAR_DOUT(x) (((x)&0x0003)<<6)
-#define MCF_GPIO_PAR_QSPI_PAR_DIN(x) (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_QSPI_PAR_PCS0(x) (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_QSPI_PAR_PCS1(x) (((x)&0x0003)<<12)
-#define MCF_GPIO_PAR_QSPI_PAR_PCS2(x) (((x)&0x0003)<<14)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0(x) (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1(x) (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x) (((x)&0x03)<<4)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x) (((x)&0x03)<<6)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_GPIO (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TOUT3 (0x80)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_URXD2 (0x40)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN3 (0xC0)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_GPIO (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TOUT2 (0x20)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_UTXD2 (0x10)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN2 (0x30)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_GPIO (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TOUT1 (0x08)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_DACK1 (0x04)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TIN1 (0x0C)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_GPIO (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TOUT0 (0x02)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_DREQ0 (0x01)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TIN0 (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_LCDDATA */
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD7_0(x) (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD15_8(x) (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD16(x) (((x)&0x03)<<4)
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD17(x) (((x)&0x03)<<6)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_LCDCTL */
-#define MCF_GPIO_PAR_LCDCTL_PAR_CLS (0x0001)
-#define MCF_GPIO_PAR_LCDCTL_PAR_PS (0x0002)
-#define MCF_GPIO_PAR_LCDCTL_PAR_REV (0x0004)
-#define MCF_GPIO_PAR_LCDCTL_PAR_SPL_SPR (0x0008)
-#define MCF_GPIO_PAR_LCDCTL_PAR_CONTRAST (0x0010)
-#define MCF_GPIO_PAR_LCDCTL_PAR_LSCLK (0x0020)
-#define MCF_GPIO_PAR_LCDCTL_PAR_LP_HSYNC (0x0040)
-#define MCF_GPIO_PAR_LCDCTL_PAR_FLM_VSYNC (0x0080)
-#define MCF_GPIO_PAR_LCDCTL_PAR_ACD_OE (0x0100)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_IRQ */
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ1(x) (((x)&0x0003)<<4)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ2(x) (((x)&0x0003)<<6)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ4(x) (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ5(x) (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ6(x) (((x)&0x0003)<<12)
-
-/* Bit definitions and macros for MCF_GPIO_MSCR_FLEXBUS */
-#define MCF_GPIO_MSCR_FLEXBUS_MSCR_ADDRCTL(x) (((x)&0x03)<<0)
-#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DLOWER(x) (((x)&0x03)<<2)
-#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DUPPER(x) (((x)&0x03)<<4)
-
-/* Bit definitions and macros for MCF_GPIO_MSCR_SDRAM */
-#define MCF_GPIO_MSCR_SDRAM_MSCR_SDRAM(x) (((x)&0x03)<<0)
-#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLK(x) (((x)&0x03)<<2)
-#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLKB(x) (((x)&0x03)<<4)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_I2C */
-#define MCF_GPIO_DSCR_I2C_I2C_DSE(x) (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_PWM */
-#define MCF_GPIO_DSCR_PWM_PWM_DSE(x) (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_FEC */
-#define MCF_GPIO_DSCR_FEC_FEC_DSE(x) (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_UART */
-#define MCF_GPIO_DSCR_UART_UART0_DSE(x) (((x)&0x03)<<0)
-#define MCF_GPIO_DSCR_UART_UART1_DSE(x) (((x)&0x03)<<2)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_QSPI */
-#define MCF_GPIO_DSCR_QSPI_QSPI_DSE(x) (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_TIMER */
-#define MCF_GPIO_DSCR_TIMER_TIMER_DSE(x) (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_SSI */
-#define MCF_GPIO_DSCR_SSI_SSI_DSE(x) (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_LCD */
-#define MCF_GPIO_DSCR_LCD_LCD_DSE(x) (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_DEBUG */
-#define MCF_GPIO_DSCR_DEBUG_DEBUG_DSE(x) (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_CLKRST */
-#define MCF_GPIO_DSCR_CLKRST_CLKRST_DSE(x) (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */
-#define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x) (((x)&0x03)<<0)
-
-/*********************************************************************
- *
- * Interrupt Controller (INTC)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_INTC0_IPRH MCF_REG32(0xFC048000)
-#define MCF_INTC0_IPRL MCF_REG32(0xFC048004)
-#define MCF_INTC0_IMRH MCF_REG32(0xFC048008)
-#define MCF_INTC0_IMRL MCF_REG32(0xFC04800C)
-#define MCF_INTC0_INTFRCH MCF_REG32(0xFC048010)
-#define MCF_INTC0_INTFRCL MCF_REG32(0xFC048014)
-#define MCF_INTC0_ICONFIG MCF_REG16(0xFC04801A)
-#define MCF_INTC0_SIMR MCF_REG08(0xFC04801C)
-#define MCF_INTC0_CIMR MCF_REG08(0xFC04801D)
-#define MCF_INTC0_CLMASK MCF_REG08(0xFC04801E)
-#define MCF_INTC0_SLMASK MCF_REG08(0xFC04801F)
-#define MCF_INTC0_ICR0 MCF_REG08(0xFC048040)
-#define MCF_INTC0_ICR1 MCF_REG08(0xFC048041)
-#define MCF_INTC0_ICR2 MCF_REG08(0xFC048042)
-#define MCF_INTC0_ICR3 MCF_REG08(0xFC048043)
-#define MCF_INTC0_ICR4 MCF_REG08(0xFC048044)
-#define MCF_INTC0_ICR5 MCF_REG08(0xFC048045)
-#define MCF_INTC0_ICR6 MCF_REG08(0xFC048046)
-#define MCF_INTC0_ICR7 MCF_REG08(0xFC048047)
-#define MCF_INTC0_ICR8 MCF_REG08(0xFC048048)
-#define MCF_INTC0_ICR9 MCF_REG08(0xFC048049)
-#define MCF_INTC0_ICR10 MCF_REG08(0xFC04804A)
-#define MCF_INTC0_ICR11 MCF_REG08(0xFC04804B)
-#define MCF_INTC0_ICR12 MCF_REG08(0xFC04804C)
-#define MCF_INTC0_ICR13 MCF_REG08(0xFC04804D)
-#define MCF_INTC0_ICR14 MCF_REG08(0xFC04804E)
-#define MCF_INTC0_ICR15 MCF_REG08(0xFC04804F)
-#define MCF_INTC0_ICR16 MCF_REG08(0xFC048050)
-#define MCF_INTC0_ICR17 MCF_REG08(0xFC048051)
-#define MCF_INTC0_ICR18 MCF_REG08(0xFC048052)
-#define MCF_INTC0_ICR19 MCF_REG08(0xFC048053)
-#define MCF_INTC0_ICR20 MCF_REG08(0xFC048054)
-#define MCF_INTC0_ICR21 MCF_REG08(0xFC048055)
-#define MCF_INTC0_ICR22 MCF_REG08(0xFC048056)
-#define MCF_INTC0_ICR23 MCF_REG08(0xFC048057)
-#define MCF_INTC0_ICR24 MCF_REG08(0xFC048058)
-#define MCF_INTC0_ICR25 MCF_REG08(0xFC048059)
-#define MCF_INTC0_ICR26 MCF_REG08(0xFC04805A)
-#define MCF_INTC0_ICR27 MCF_REG08(0xFC04805B)
-#define MCF_INTC0_ICR28 MCF_REG08(0xFC04805C)
-#define MCF_INTC0_ICR29 MCF_REG08(0xFC04805D)
-#define MCF_INTC0_ICR30 MCF_REG08(0xFC04805E)
-#define MCF_INTC0_ICR31 MCF_REG08(0xFC04805F)
-#define MCF_INTC0_ICR32 MCF_REG08(0xFC048060)
-#define MCF_INTC0_ICR33 MCF_REG08(0xFC048061)
-#define MCF_INTC0_ICR34 MCF_REG08(0xFC048062)
-#define MCF_INTC0_ICR35 MCF_REG08(0xFC048063)
-#define MCF_INTC0_ICR36 MCF_REG08(0xFC048064)
-#define MCF_INTC0_ICR37 MCF_REG08(0xFC048065)
-#define MCF_INTC0_ICR38 MCF_REG08(0xFC048066)
-#define MCF_INTC0_ICR39 MCF_REG08(0xFC048067)
-#define MCF_INTC0_ICR40 MCF_REG08(0xFC048068)
-#define MCF_INTC0_ICR41 MCF_REG08(0xFC048069)
-#define MCF_INTC0_ICR42 MCF_REG08(0xFC04806A)
-#define MCF_INTC0_ICR43 MCF_REG08(0xFC04806B)
-#define MCF_INTC0_ICR44 MCF_REG08(0xFC04806C)
-#define MCF_INTC0_ICR45 MCF_REG08(0xFC04806D)
-#define MCF_INTC0_ICR46 MCF_REG08(0xFC04806E)
-#define MCF_INTC0_ICR47 MCF_REG08(0xFC04806F)
-#define MCF_INTC0_ICR48 MCF_REG08(0xFC048070)
-#define MCF_INTC0_ICR49 MCF_REG08(0xFC048071)
-#define MCF_INTC0_ICR50 MCF_REG08(0xFC048072)
-#define MCF_INTC0_ICR51 MCF_REG08(0xFC048073)
-#define MCF_INTC0_ICR52 MCF_REG08(0xFC048074)
-#define MCF_INTC0_ICR53 MCF_REG08(0xFC048075)
-#define MCF_INTC0_ICR54 MCF_REG08(0xFC048076)
-#define MCF_INTC0_ICR55 MCF_REG08(0xFC048077)
-#define MCF_INTC0_ICR56 MCF_REG08(0xFC048078)
-#define MCF_INTC0_ICR57 MCF_REG08(0xFC048079)
-#define MCF_INTC0_ICR58 MCF_REG08(0xFC04807A)
-#define MCF_INTC0_ICR59 MCF_REG08(0xFC04807B)
-#define MCF_INTC0_ICR60 MCF_REG08(0xFC04807C)
-#define MCF_INTC0_ICR61 MCF_REG08(0xFC04807D)
-#define MCF_INTC0_ICR62 MCF_REG08(0xFC04807E)
-#define MCF_INTC0_ICR63 MCF_REG08(0xFC04807F)
-#define MCF_INTC0_ICR(x) MCF_REG08(0xFC048040+((x)*0x001))
-#define MCF_INTC0_SWIACK MCF_REG08(0xFC0480E0)
-#define MCF_INTC0_L1IACK MCF_REG08(0xFC0480E4)
-#define MCF_INTC0_L2IACK MCF_REG08(0xFC0480E8)
-#define MCF_INTC0_L3IACK MCF_REG08(0xFC0480EC)
-#define MCF_INTC0_L4IACK MCF_REG08(0xFC0480F0)
-#define MCF_INTC0_L5IACK MCF_REG08(0xFC0480F4)
-#define MCF_INTC0_L6IACK MCF_REG08(0xFC0480F8)
-#define MCF_INTC0_L7IACK MCF_REG08(0xFC0480FC)
-#define MCF_INTC0_LIACK(x) MCF_REG08(0xFC0480E4+((x)*0x004))
-#define MCF_INTC1_IPRH MCF_REG32(0xFC04C000)
-#define MCF_INTC1_IPRL MCF_REG32(0xFC04C004)
-#define MCF_INTC1_IMRH MCF_REG32(0xFC04C008)
-#define MCF_INTC1_IMRL MCF_REG32(0xFC04C00C)
-#define MCF_INTC1_INTFRCH MCF_REG32(0xFC04C010)
-#define MCF_INTC1_INTFRCL MCF_REG32(0xFC04C014)
-#define MCF_INTC1_ICONFIG MCF_REG16(0xFC04C01A)
-#define MCF_INTC1_SIMR MCF_REG08(0xFC04C01C)
-#define MCF_INTC1_CIMR MCF_REG08(0xFC04C01D)
-#define MCF_INTC1_CLMASK MCF_REG08(0xFC04C01E)
-#define MCF_INTC1_SLMASK MCF_REG08(0xFC04C01F)
-#define MCF_INTC1_ICR0 MCF_REG08(0xFC04C040)
-#define MCF_INTC1_ICR1 MCF_REG08(0xFC04C041)
-#define MCF_INTC1_ICR2 MCF_REG08(0xFC04C042)
-#define MCF_INTC1_ICR3 MCF_REG08(0xFC04C043)
-#define MCF_INTC1_ICR4 MCF_REG08(0xFC04C044)
-#define MCF_INTC1_ICR5 MCF_REG08(0xFC04C045)
-#define MCF_INTC1_ICR6 MCF_REG08(0xFC04C046)
-#define MCF_INTC1_ICR7 MCF_REG08(0xFC04C047)
-#define MCF_INTC1_ICR8 MCF_REG08(0xFC04C048)
-#define MCF_INTC1_ICR9 MCF_REG08(0xFC04C049)
-#define MCF_INTC1_ICR10 MCF_REG08(0xFC04C04A)
-#define MCF_INTC1_ICR11 MCF_REG08(0xFC04C04B)
-#define MCF_INTC1_ICR12 MCF_REG08(0xFC04C04C)
-#define MCF_INTC1_ICR13 MCF_REG08(0xFC04C04D)
-#define MCF_INTC1_ICR14 MCF_REG08(0xFC04C04E)
-#define MCF_INTC1_ICR15 MCF_REG08(0xFC04C04F)
-#define MCF_INTC1_ICR16 MCF_REG08(0xFC04C050)
-#define MCF_INTC1_ICR17 MCF_REG08(0xFC04C051)
-#define MCF_INTC1_ICR18 MCF_REG08(0xFC04C052)
-#define MCF_INTC1_ICR19 MCF_REG08(0xFC04C053)
-#define MCF_INTC1_ICR20 MCF_REG08(0xFC04C054)
-#define MCF_INTC1_ICR21 MCF_REG08(0xFC04C055)
-#define MCF_INTC1_ICR22 MCF_REG08(0xFC04C056)
-#define MCF_INTC1_ICR23 MCF_REG08(0xFC04C057)
-#define MCF_INTC1_ICR24 MCF_REG08(0xFC04C058)
-#define MCF_INTC1_ICR25 MCF_REG08(0xFC04C059)
-#define MCF_INTC1_ICR26 MCF_REG08(0xFC04C05A)
-#define MCF_INTC1_ICR27 MCF_REG08(0xFC04C05B)
-#define MCF_INTC1_ICR28 MCF_REG08(0xFC04C05C)
-#define MCF_INTC1_ICR29 MCF_REG08(0xFC04C05D)
-#define MCF_INTC1_ICR30 MCF_REG08(0xFC04C05E)
-#define MCF_INTC1_ICR31 MCF_REG08(0xFC04C05F)
-#define MCF_INTC1_ICR32 MCF_REG08(0xFC04C060)
-#define MCF_INTC1_ICR33 MCF_REG08(0xFC04C061)
-#define MCF_INTC1_ICR34 MCF_REG08(0xFC04C062)
-#define MCF_INTC1_ICR35 MCF_REG08(0xFC04C063)
-#define MCF_INTC1_ICR36 MCF_REG08(0xFC04C064)
-#define MCF_INTC1_ICR37 MCF_REG08(0xFC04C065)
-#define MCF_INTC1_ICR38 MCF_REG08(0xFC04C066)
-#define MCF_INTC1_ICR39 MCF_REG08(0xFC04C067)
-#define MCF_INTC1_ICR40 MCF_REG08(0xFC04C068)
-#define MCF_INTC1_ICR41 MCF_REG08(0xFC04C069)
-#define MCF_INTC1_ICR42 MCF_REG08(0xFC04C06A)
-#define MCF_INTC1_ICR43 MCF_REG08(0xFC04C06B)
-#define MCF_INTC1_ICR44 MCF_REG08(0xFC04C06C)
-#define MCF_INTC1_ICR45 MCF_REG08(0xFC04C06D)
-#define MCF_INTC1_ICR46 MCF_REG08(0xFC04C06E)
-#define MCF_INTC1_ICR47 MCF_REG08(0xFC04C06F)
-#define MCF_INTC1_ICR48 MCF_REG08(0xFC04C070)
-#define MCF_INTC1_ICR49 MCF_REG08(0xFC04C071)
-#define MCF_INTC1_ICR50 MCF_REG08(0xFC04C072)
-#define MCF_INTC1_ICR51 MCF_REG08(0xFC04C073)
-#define MCF_INTC1_ICR52 MCF_REG08(0xFC04C074)
-#define MCF_INTC1_ICR53 MCF_REG08(0xFC04C075)
-#define MCF_INTC1_ICR54 MCF_REG08(0xFC04C076)
-#define MCF_INTC1_ICR55 MCF_REG08(0xFC04C077)
-#define MCF_INTC1_ICR56 MCF_REG08(0xFC04C078)
-#define MCF_INTC1_ICR57 MCF_REG08(0xFC04C079)
-#define MCF_INTC1_ICR58 MCF_REG08(0xFC04C07A)
-#define MCF_INTC1_ICR59 MCF_REG08(0xFC04C07B)
-#define MCF_INTC1_ICR60 MCF_REG08(0xFC04C07C)
-#define MCF_INTC1_ICR61 MCF_REG08(0xFC04C07D)
-#define MCF_INTC1_ICR62 MCF_REG08(0xFC04C07E)
-#define MCF_INTC1_ICR63 MCF_REG08(0xFC04C07F)
-#define MCF_INTC1_ICR(x) MCF_REG08(0xFC04C040+((x)*0x001))
-#define MCF_INTC1_SWIACK MCF_REG08(0xFC04C0E0)
-#define MCF_INTC1_L1IACK MCF_REG08(0xFC04C0E4)
-#define MCF_INTC1_L2IACK MCF_REG08(0xFC04C0E8)
-#define MCF_INTC1_L3IACK MCF_REG08(0xFC04C0EC)
-#define MCF_INTC1_L4IACK MCF_REG08(0xFC04C0F0)
-#define MCF_INTC1_L5IACK MCF_REG08(0xFC04C0F4)
-#define MCF_INTC1_L6IACK MCF_REG08(0xFC04C0F8)
-#define MCF_INTC1_L7IACK MCF_REG08(0xFC04C0FC)
-#define MCF_INTC1_LIACK(x) MCF_REG08(0xFC04C0E4+((x)*0x004))
-#define MCF_INTC_IPRH(x) MCF_REG32(0xFC048000+((x)*0x4000))
-#define MCF_INTC_IPRL(x) MCF_REG32(0xFC048004+((x)*0x4000))
-#define MCF_INTC_IMRH(x) MCF_REG32(0xFC048008+((x)*0x4000))
-#define MCF_INTC_IMRL(x) MCF_REG32(0xFC04800C+((x)*0x4000))
-#define MCF_INTC_INTFRCH(x) MCF_REG32(0xFC048010+((x)*0x4000))
-#define MCF_INTC_INTFRCL(x) MCF_REG32(0xFC048014+((x)*0x4000))
-#define MCF_INTC_ICONFIG(x) MCF_REG16(0xFC04801A+((x)*0x4000))
-#define MCF_INTC_SIMR(x) MCF_REG08(0xFC04801C+((x)*0x4000))
-#define MCF_INTC_CIMR(x) MCF_REG08(0xFC04801D+((x)*0x4000))
-#define MCF_INTC_CLMASK(x) MCF_REG08(0xFC04801E+((x)*0x4000))
-#define MCF_INTC_SLMASK(x) MCF_REG08(0xFC04801F+((x)*0x4000))
-#define MCF_INTC_ICR0(x) MCF_REG08(0xFC048040+((x)*0x4000))
-#define MCF_INTC_ICR1(x) MCF_REG08(0xFC048041+((x)*0x4000))
-#define MCF_INTC_ICR2(x) MCF_REG08(0xFC048042+((x)*0x4000))
-#define MCF_INTC_ICR3(x) MCF_REG08(0xFC048043+((x)*0x4000))
-#define MCF_INTC_ICR4(x) MCF_REG08(0xFC048044+((x)*0x4000))
-#define MCF_INTC_ICR5(x) MCF_REG08(0xFC048045+((x)*0x4000))
-#define MCF_INTC_ICR6(x) MCF_REG08(0xFC048046+((x)*0x4000))
-#define MCF_INTC_ICR7(x) MCF_REG08(0xFC048047+((x)*0x4000))
-#define MCF_INTC_ICR8(x) MCF_REG08(0xFC048048+((x)*0x4000))
-#define MCF_INTC_ICR9(x) MCF_REG08(0xFC048049+((x)*0x4000))
-#define MCF_INTC_ICR10(x) MCF_REG08(0xFC04804A+((x)*0x4000))
-#define MCF_INTC_ICR11(x) MCF_REG08(0xFC04804B+((x)*0x4000))
-#define MCF_INTC_ICR12(x) MCF_REG08(0xFC04804C+((x)*0x4000))
-#define MCF_INTC_ICR13(x) MCF_REG08(0xFC04804D+((x)*0x4000))
-#define MCF_INTC_ICR14(x) MCF_REG08(0xFC04804E+((x)*0x4000))
-#define MCF_INTC_ICR15(x) MCF_REG08(0xFC04804F+((x)*0x4000))
-#define MCF_INTC_ICR16(x) MCF_REG08(0xFC048050+((x)*0x4000))
-#define MCF_INTC_ICR17(x) MCF_REG08(0xFC048051+((x)*0x4000))
-#define MCF_INTC_ICR18(x) MCF_REG08(0xFC048052+((x)*0x4000))
-#define MCF_INTC_ICR19(x) MCF_REG08(0xFC048053+((x)*0x4000))
-#define MCF_INTC_ICR20(x) MCF_REG08(0xFC048054+((x)*0x4000))
-#define MCF_INTC_ICR21(x) MCF_REG08(0xFC048055+((x)*0x4000))
-#define MCF_INTC_ICR22(x) MCF_REG08(0xFC048056+((x)*0x4000))
-#define MCF_INTC_ICR23(x) MCF_REG08(0xFC048057+((x)*0x4000))
-#define MCF_INTC_ICR24(x) MCF_REG08(0xFC048058+((x)*0x4000))
-#define MCF_INTC_ICR25(x) MCF_REG08(0xFC048059+((x)*0x4000))
-#define MCF_INTC_ICR26(x) MCF_REG08(0xFC04805A+((x)*0x4000))
-#define MCF_INTC_ICR27(x) MCF_REG08(0xFC04805B+((x)*0x4000))
-#define MCF_INTC_ICR28(x) MCF_REG08(0xFC04805C+((x)*0x4000))
-#define MCF_INTC_ICR29(x) MCF_REG08(0xFC04805D+((x)*0x4000))
-#define MCF_INTC_ICR30(x) MCF_REG08(0xFC04805E+((x)*0x4000))
-#define MCF_INTC_ICR31(x) MCF_REG08(0xFC04805F+((x)*0x4000))
-#define MCF_INTC_ICR32(x) MCF_REG08(0xFC048060+((x)*0x4000))
-#define MCF_INTC_ICR33(x) MCF_REG08(0xFC048061+((x)*0x4000))
-#define MCF_INTC_ICR34(x) MCF_REG08(0xFC048062+((x)*0x4000))
-#define MCF_INTC_ICR35(x) MCF_REG08(0xFC048063+((x)*0x4000))
-#define MCF_INTC_ICR36(x) MCF_REG08(0xFC048064+((x)*0x4000))
-#define MCF_INTC_ICR37(x) MCF_REG08(0xFC048065+((x)*0x4000))
-#define MCF_INTC_ICR38(x) MCF_REG08(0xFC048066+((x)*0x4000))
-#define MCF_INTC_ICR39(x) MCF_REG08(0xFC048067+((x)*0x4000))
-#define MCF_INTC_ICR40(x) MCF_REG08(0xFC048068+((x)*0x4000))
-#define MCF_INTC_ICR41(x) MCF_REG08(0xFC048069+((x)*0x4000))
-#define MCF_INTC_ICR42(x) MCF_REG08(0xFC04806A+((x)*0x4000))
-#define MCF_INTC_ICR43(x) MCF_REG08(0xFC04806B+((x)*0x4000))
-#define MCF_INTC_ICR44(x) MCF_REG08(0xFC04806C+((x)*0x4000))
-#define MCF_INTC_ICR45(x) MCF_REG08(0xFC04806D+((x)*0x4000))
-#define MCF_INTC_ICR46(x) MCF_REG08(0xFC04806E+((x)*0x4000))
-#define MCF_INTC_ICR47(x) MCF_REG08(0xFC04806F+((x)*0x4000))
-#define MCF_INTC_ICR48(x) MCF_REG08(0xFC048070+((x)*0x4000))
-#define MCF_INTC_ICR49(x) MCF_REG08(0xFC048071+((x)*0x4000))
-#define MCF_INTC_ICR50(x) MCF_REG08(0xFC048072+((x)*0x4000))
-#define MCF_INTC_ICR51(x) MCF_REG08(0xFC048073+((x)*0x4000))
-#define MCF_INTC_ICR52(x) MCF_REG08(0xFC048074+((x)*0x4000))
-#define MCF_INTC_ICR53(x) MCF_REG08(0xFC048075+((x)*0x4000))
-#define MCF_INTC_ICR54(x) MCF_REG08(0xFC048076+((x)*0x4000))
-#define MCF_INTC_ICR55(x) MCF_REG08(0xFC048077+((x)*0x4000))
-#define MCF_INTC_ICR56(x) MCF_REG08(0xFC048078+((x)*0x4000))
-#define MCF_INTC_ICR57(x) MCF_REG08(0xFC048079+((x)*0x4000))
-#define MCF_INTC_ICR58(x) MCF_REG08(0xFC04807A+((x)*0x4000))
-#define MCF_INTC_ICR59(x) MCF_REG08(0xFC04807B+((x)*0x4000))
-#define MCF_INTC_ICR60(x) MCF_REG08(0xFC04807C+((x)*0x4000))
-#define MCF_INTC_ICR61(x) MCF_REG08(0xFC04807D+((x)*0x4000))
-#define MCF_INTC_ICR62(x) MCF_REG08(0xFC04807E+((x)*0x4000))
-#define MCF_INTC_ICR63(x) MCF_REG08(0xFC04807F+((x)*0x4000))
-#define MCF_INTC_SWIACK(x) MCF_REG08(0xFC0480E0+((x)*0x4000))
-#define MCF_INTC_L1IACK(x) MCF_REG08(0xFC0480E4+((x)*0x4000))
-#define MCF_INTC_L2IACK(x) MCF_REG08(0xFC0480E8+((x)*0x4000))
-#define MCF_INTC_L3IACK(x) MCF_REG08(0xFC0480EC+((x)*0x4000))
-#define MCF_INTC_L4IACK(x) MCF_REG08(0xFC0480F0+((x)*0x4000))
-#define MCF_INTC_L5IACK(x) MCF_REG08(0xFC0480F4+((x)*0x4000))
-#define MCF_INTC_L6IACK(x) MCF_REG08(0xFC0480F8+((x)*0x4000))
-#define MCF_INTC_L7IACK(x) MCF_REG08(0xFC0480FC+((x)*0x4000))
-
-/* Bit definitions and macros for MCF_INTC_IPRH */
-#define MCF_INTC_IPRH_INT32 (0x00000001)
-#define MCF_INTC_IPRH_INT33 (0x00000002)
-#define MCF_INTC_IPRH_INT34 (0x00000004)
-#define MCF_INTC_IPRH_INT35 (0x00000008)
-#define MCF_INTC_IPRH_INT36 (0x00000010)
-#define MCF_INTC_IPRH_INT37 (0x00000020)
-#define MCF_INTC_IPRH_INT38 (0x00000040)
-#define MCF_INTC_IPRH_INT39 (0x00000080)
-#define MCF_INTC_IPRH_INT40 (0x00000100)
-#define MCF_INTC_IPRH_INT41 (0x00000200)
-#define MCF_INTC_IPRH_INT42 (0x00000400)
-#define MCF_INTC_IPRH_INT43 (0x00000800)
-#define MCF_INTC_IPRH_INT44 (0x00001000)
-#define MCF_INTC_IPRH_INT45 (0x00002000)
-#define MCF_INTC_IPRH_INT46 (0x00004000)
-#define MCF_INTC_IPRH_INT47 (0x00008000)
-#define MCF_INTC_IPRH_INT48 (0x00010000)
-#define MCF_INTC_IPRH_INT49 (0x00020000)
-#define MCF_INTC_IPRH_INT50 (0x00040000)
-#define MCF_INTC_IPRH_INT51 (0x00080000)
-#define MCF_INTC_IPRH_INT52 (0x00100000)
-#define MCF_INTC_IPRH_INT53 (0x00200000)
-#define MCF_INTC_IPRH_INT54 (0x00400000)
-#define MCF_INTC_IPRH_INT55 (0x00800000)
-#define MCF_INTC_IPRH_INT56 (0x01000000)
-#define MCF_INTC_IPRH_INT57 (0x02000000)
-#define MCF_INTC_IPRH_INT58 (0x04000000)
-#define MCF_INTC_IPRH_INT59 (0x08000000)
-#define MCF_INTC_IPRH_INT60 (0x10000000)
-#define MCF_INTC_IPRH_INT61 (0x20000000)
-#define MCF_INTC_IPRH_INT62 (0x40000000)
-#define MCF_INTC_IPRH_INT63 (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_IPRL */
-#define MCF_INTC_IPRL_INT0 (0x00000001)
-#define MCF_INTC_IPRL_INT1 (0x00000002)
-#define MCF_INTC_IPRL_INT2 (0x00000004)
-#define MCF_INTC_IPRL_INT3 (0x00000008)
-#define MCF_INTC_IPRL_INT4 (0x00000010)
-#define MCF_INTC_IPRL_INT5 (0x00000020)
-#define MCF_INTC_IPRL_INT6 (0x00000040)
-#define MCF_INTC_IPRL_INT7 (0x00000080)
-#define MCF_INTC_IPRL_INT8 (0x00000100)
-#define MCF_INTC_IPRL_INT9 (0x00000200)
-#define MCF_INTC_IPRL_INT10 (0x00000400)
-#define MCF_INTC_IPRL_INT11 (0x00000800)
-#define MCF_INTC_IPRL_INT12 (0x00001000)
-#define MCF_INTC_IPRL_INT13 (0x00002000)
-#define MCF_INTC_IPRL_INT14 (0x00004000)
-#define MCF_INTC_IPRL_INT15 (0x00008000)
-#define MCF_INTC_IPRL_INT16 (0x00010000)
-#define MCF_INTC_IPRL_INT17 (0x00020000)
-#define MCF_INTC_IPRL_INT18 (0x00040000)
-#define MCF_INTC_IPRL_INT19 (0x00080000)
-#define MCF_INTC_IPRL_INT20 (0x00100000)
-#define MCF_INTC_IPRL_INT21 (0x00200000)
-#define MCF_INTC_IPRL_INT22 (0x00400000)
-#define MCF_INTC_IPRL_INT23 (0x00800000)
-#define MCF_INTC_IPRL_INT24 (0x01000000)
-#define MCF_INTC_IPRL_INT25 (0x02000000)
-#define MCF_INTC_IPRL_INT26 (0x04000000)
-#define MCF_INTC_IPRL_INT27 (0x08000000)
-#define MCF_INTC_IPRL_INT28 (0x10000000)
-#define MCF_INTC_IPRL_INT29 (0x20000000)
-#define MCF_INTC_IPRL_INT30 (0x40000000)
-#define MCF_INTC_IPRL_INT31 (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_IMRH */
-#define MCF_INTC_IMRH_INT_MASK32 (0x00000001)
-#define MCF_INTC_IMRH_INT_MASK33 (0x00000002)
-#define MCF_INTC_IMRH_INT_MASK34 (0x00000004)
-#define MCF_INTC_IMRH_INT_MASK35 (0x00000008)
-#define MCF_INTC_IMRH_INT_MASK36 (0x00000010)
-#define MCF_INTC_IMRH_INT_MASK37 (0x00000020)
-#define MCF_INTC_IMRH_INT_MASK38 (0x00000040)
-#define MCF_INTC_IMRH_INT_MASK39 (0x00000080)
-#define MCF_INTC_IMRH_INT_MASK40 (0x00000100)
-#define MCF_INTC_IMRH_INT_MASK41 (0x00000200)
-#define MCF_INTC_IMRH_INT_MASK42 (0x00000400)
-#define MCF_INTC_IMRH_INT_MASK43 (0x00000800)
-#define MCF_INTC_IMRH_INT_MASK44 (0x00001000)
-#define MCF_INTC_IMRH_INT_MASK45 (0x00002000)
-#define MCF_INTC_IMRH_INT_MASK46 (0x00004000)
-#define MCF_INTC_IMRH_INT_MASK47 (0x00008000)
-#define MCF_INTC_IMRH_INT_MASK48 (0x00010000)
-#define MCF_INTC_IMRH_INT_MASK49 (0x00020000)
-#define MCF_INTC_IMRH_INT_MASK50 (0x00040000)
-#define MCF_INTC_IMRH_INT_MASK51 (0x00080000)
-#define MCF_INTC_IMRH_INT_MASK52 (0x00100000)
-#define MCF_INTC_IMRH_INT_MASK53 (0x00200000)
-#define MCF_INTC_IMRH_INT_MASK54 (0x00400000)
-#define MCF_INTC_IMRH_INT_MASK55 (0x00800000)
-#define MCF_INTC_IMRH_INT_MASK56 (0x01000000)
-#define MCF_INTC_IMRH_INT_MASK57 (0x02000000)
-#define MCF_INTC_IMRH_INT_MASK58 (0x04000000)
-#define MCF_INTC_IMRH_INT_MASK59 (0x08000000)
-#define MCF_INTC_IMRH_INT_MASK60 (0x10000000)
-#define MCF_INTC_IMRH_INT_MASK61 (0x20000000)
-#define MCF_INTC_IMRH_INT_MASK62 (0x40000000)
-#define MCF_INTC_IMRH_INT_MASK63 (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_IMRL */
-#define MCF_INTC_IMRL_INT_MASK0 (0x00000001)
-#define MCF_INTC_IMRL_INT_MASK1 (0x00000002)
-#define MCF_INTC_IMRL_INT_MASK2 (0x00000004)
-#define MCF_INTC_IMRL_INT_MASK3 (0x00000008)
-#define MCF_INTC_IMRL_INT_MASK4 (0x00000010)
-#define MCF_INTC_IMRL_INT_MASK5 (0x00000020)
-#define MCF_INTC_IMRL_INT_MASK6 (0x00000040)
-#define MCF_INTC_IMRL_INT_MASK7 (0x00000080)
-#define MCF_INTC_IMRL_INT_MASK8 (0x00000100)
-#define MCF_INTC_IMRL_INT_MASK9 (0x00000200)
-#define MCF_INTC_IMRL_INT_MASK10 (0x00000400)
-#define MCF_INTC_IMRL_INT_MASK11 (0x00000800)
-#define MCF_INTC_IMRL_INT_MASK12 (0x00001000)
-#define MCF_INTC_IMRL_INT_MASK13 (0x00002000)
-#define MCF_INTC_IMRL_INT_MASK14 (0x00004000)
-#define MCF_INTC_IMRL_INT_MASK15 (0x00008000)
-#define MCF_INTC_IMRL_INT_MASK16 (0x00010000)
-#define MCF_INTC_IMRL_INT_MASK17 (0x00020000)
-#define MCF_INTC_IMRL_INT_MASK18 (0x00040000)
-#define MCF_INTC_IMRL_INT_MASK19 (0x00080000)
-#define MCF_INTC_IMRL_INT_MASK20 (0x00100000)
-#define MCF_INTC_IMRL_INT_MASK21 (0x00200000)
-#define MCF_INTC_IMRL_INT_MASK22 (0x00400000)
-#define MCF_INTC_IMRL_INT_MASK23 (0x00800000)
-#define MCF_INTC_IMRL_INT_MASK24 (0x01000000)
-#define MCF_INTC_IMRL_INT_MASK25 (0x02000000)
-#define MCF_INTC_IMRL_INT_MASK26 (0x04000000)
-#define MCF_INTC_IMRL_INT_MASK27 (0x08000000)
-#define MCF_INTC_IMRL_INT_MASK28 (0x10000000)
-#define MCF_INTC_IMRL_INT_MASK29 (0x20000000)
-#define MCF_INTC_IMRL_INT_MASK30 (0x40000000)
-#define MCF_INTC_IMRL_INT_MASK31 (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_INTFRCH */
-#define MCF_INTC_INTFRCH_INTFRC32 (0x00000001)
-#define MCF_INTC_INTFRCH_INTFRC33 (0x00000002)
-#define MCF_INTC_INTFRCH_INTFRC34 (0x00000004)
-#define MCF_INTC_INTFRCH_INTFRC35 (0x00000008)
-#define MCF_INTC_INTFRCH_INTFRC36 (0x00000010)
-#define MCF_INTC_INTFRCH_INTFRC37 (0x00000020)
-#define MCF_INTC_INTFRCH_INTFRC38 (0x00000040)
-#define MCF_INTC_INTFRCH_INTFRC39 (0x00000080)
-#define MCF_INTC_INTFRCH_INTFRC40 (0x00000100)
-#define MCF_INTC_INTFRCH_INTFRC41 (0x00000200)
-#define MCF_INTC_INTFRCH_INTFRC42 (0x00000400)
-#define MCF_INTC_INTFRCH_INTFRC43 (0x00000800)
-#define MCF_INTC_INTFRCH_INTFRC44 (0x00001000)
-#define MCF_INTC_INTFRCH_INTFRC45 (0x00002000)
-#define MCF_INTC_INTFRCH_INTFRC46 (0x00004000)
-#define MCF_INTC_INTFRCH_INTFRC47 (0x00008000)
-#define MCF_INTC_INTFRCH_INTFRC48 (0x00010000)
-#define MCF_INTC_INTFRCH_INTFRC49 (0x00020000)
-#define MCF_INTC_INTFRCH_INTFRC50 (0x00040000)
-#define MCF_INTC_INTFRCH_INTFRC51 (0x00080000)
-#define MCF_INTC_INTFRCH_INTFRC52 (0x00100000)
-#define MCF_INTC_INTFRCH_INTFRC53 (0x00200000)
-#define MCF_INTC_INTFRCH_INTFRC54 (0x00400000)
-#define MCF_INTC_INTFRCH_INTFRC55 (0x00800000)
-#define MCF_INTC_INTFRCH_INTFRC56 (0x01000000)
-#define MCF_INTC_INTFRCH_INTFRC57 (0x02000000)
-#define MCF_INTC_INTFRCH_INTFRC58 (0x04000000)
-#define MCF_INTC_INTFRCH_INTFRC59 (0x08000000)
-#define MCF_INTC_INTFRCH_INTFRC60 (0x10000000)
-#define MCF_INTC_INTFRCH_INTFRC61 (0x20000000)
-#define MCF_INTC_INTFRCH_INTFRC62 (0x40000000)
-#define MCF_INTC_INTFRCH_INTFRC63 (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_INTFRCL */
-#define MCF_INTC_INTFRCL_INTFRC0 (0x00000001)
-#define MCF_INTC_INTFRCL_INTFRC1 (0x00000002)
-#define MCF_INTC_INTFRCL_INTFRC2 (0x00000004)
-#define MCF_INTC_INTFRCL_INTFRC3 (0x00000008)
-#define MCF_INTC_INTFRCL_INTFRC4 (0x00000010)
-#define MCF_INTC_INTFRCL_INTFRC5 (0x00000020)
-#define MCF_INTC_INTFRCL_INTFRC6 (0x00000040)
-#define MCF_INTC_INTFRCL_INTFRC7 (0x00000080)
-#define MCF_INTC_INTFRCL_INTFRC8 (0x00000100)
-#define MCF_INTC_INTFRCL_INTFRC9 (0x00000200)
-#define MCF_INTC_INTFRCL_INTFRC10 (0x00000400)
-#define MCF_INTC_INTFRCL_INTFRC11 (0x00000800)
-#define MCF_INTC_INTFRCL_INTFRC12 (0x00001000)
-#define MCF_INTC_INTFRCL_INTFRC13 (0x00002000)
-#define MCF_INTC_INTFRCL_INTFRC14 (0x00004000)
-#define MCF_INTC_INTFRCL_INTFRC15 (0x00008000)
-#define MCF_INTC_INTFRCL_INTFRC16 (0x00010000)
-#define MCF_INTC_INTFRCL_INTFRC17 (0x00020000)
-#define MCF_INTC_INTFRCL_INTFRC18 (0x00040000)
-#define MCF_INTC_INTFRCL_INTFRC19 (0x00080000)
-#define MCF_INTC_INTFRCL_INTFRC20 (0x00100000)
-#define MCF_INTC_INTFRCL_INTFRC21 (0x00200000)
-#define MCF_INTC_INTFRCL_INTFRC22 (0x00400000)
-#define MCF_INTC_INTFRCL_INTFRC23 (0x00800000)
-#define MCF_INTC_INTFRCL_INTFRC24 (0x01000000)
-#define MCF_INTC_INTFRCL_INTFRC25 (0x02000000)
-#define MCF_INTC_INTFRCL_INTFRC26 (0x04000000)
-#define MCF_INTC_INTFRCL_INTFRC27 (0x08000000)
-#define MCF_INTC_INTFRCL_INTFRC28 (0x10000000)
-#define MCF_INTC_INTFRCL_INTFRC29 (0x20000000)
-#define MCF_INTC_INTFRCL_INTFRC30 (0x40000000)
-#define MCF_INTC_INTFRCL_INTFRC31 (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_ICONFIG */
-#define MCF_INTC_ICONFIG_EMASK (0x0020)
-#define MCF_INTC_ICONFIG_ELVLPRI1 (0x0200)
-#define MCF_INTC_ICONFIG_ELVLPRI2 (0x0400)
-#define MCF_INTC_ICONFIG_ELVLPRI3 (0x0800)
-#define MCF_INTC_ICONFIG_ELVLPRI4 (0x1000)
-#define MCF_INTC_ICONFIG_ELVLPRI5 (0x2000)
-#define MCF_INTC_ICONFIG_ELVLPRI6 (0x4000)
-#define MCF_INTC_ICONFIG_ELVLPRI7 (0x8000)
-
-/* Bit definitions and macros for MCF_INTC_SIMR */
-#define MCF_INTC_SIMR_SIMR(x) (((x)&0x7F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_CIMR */
-#define MCF_INTC_CIMR_CIMR(x) (((x)&0x7F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_CLMASK */
-#define MCF_INTC_CLMASK_CLMASK(x) (((x)&0x0F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_SLMASK */
-#define MCF_INTC_SLMASK_SLMASK(x) (((x)&0x0F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_ICR */
-#define MCF_INTC_ICR_IL(x) (((x)&0x07)<<0)
-
-/* Bit definitions and macros for MCF_INTC_SWIACK */
-#define MCF_INTC_SWIACK_VECTOR(x) (((x)&0xFF)<<0)
-
-/* Bit definitions and macros for MCF_INTC_LIACK */
-#define MCF_INTC_LIACK_VECTOR(x) (((x)&0xFF)<<0)
-
-/********************************************************************/
-/*********************************************************************
-*
-* LCD Controller (LCDC)
-*
-*********************************************************************/
-
-/* Register read/write macros */
-#define MCF_LCDC_LSSAR MCF_REG32(0xFC0AC000)
-#define MCF_LCDC_LSR MCF_REG32(0xFC0AC004)
-#define MCF_LCDC_LVPWR MCF_REG32(0xFC0AC008)
-#define MCF_LCDC_LCPR MCF_REG32(0xFC0AC00C)
-#define MCF_LCDC_LCWHBR MCF_REG32(0xFC0AC010)
-#define MCF_LCDC_LCCMR MCF_REG32(0xFC0AC014)
-#define MCF_LCDC_LPCR MCF_REG32(0xFC0AC018)
-#define MCF_LCDC_LHCR MCF_REG32(0xFC0AC01C)
-#define MCF_LCDC_LVCR MCF_REG32(0xFC0AC020)
-#define MCF_LCDC_LPOR MCF_REG32(0xFC0AC024)
-#define MCF_LCDC_LSCR MCF_REG32(0xFC0AC028)
-#define MCF_LCDC_LPCCR MCF_REG32(0xFC0AC02C)
-#define MCF_LCDC_LDCR MCF_REG32(0xFC0AC030)
-#define MCF_LCDC_LRMCR MCF_REG32(0xFC0AC034)
-#define MCF_LCDC_LICR MCF_REG32(0xFC0AC038)
-#define MCF_LCDC_LIER MCF_REG32(0xFC0AC03C)
-#define MCF_LCDC_LISR MCF_REG32(0xFC0AC040)
-#define MCF_LCDC_LGWSAR MCF_REG32(0xFC0AC050)
-#define MCF_LCDC_LGWSR MCF_REG32(0xFC0AC054)
-#define MCF_LCDC_LGWVPWR MCF_REG32(0xFC0AC058)
-#define MCF_LCDC_LGWPOR MCF_REG32(0xFC0AC05C)
-#define MCF_LCDC_LGWPR MCF_REG32(0xFC0AC060)
-#define MCF_LCDC_LGWCR MCF_REG32(0xFC0AC064)
-#define MCF_LCDC_LGWDCR MCF_REG32(0xFC0AC068)
-#define MCF_LCDC_BPLUT_BASE MCF_REG32(0xFC0AC800)
-#define MCF_LCDC_GWLUT_BASE MCF_REG32(0xFC0ACC00)
-
-/* Bit definitions and macros for MCF_LCDC_LSSAR */
-#define MCF_LCDC_LSSAR_SSA(x) (((x)&0x3FFFFFFF)<<2)
-
-/* Bit definitions and macros for MCF_LCDC_LSR */
-#define MCF_LCDC_LSR_YMAX(x) (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LSR_XMAX(x) (((x)&0x0000003F)<<20)
-
-/* Bit definitions and macros for MCF_LCDC_LVPWR */
-#define MCF_LCDC_LVPWR_VPW(x) (((x)&0x000003FF)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LCPR */
-#define MCF_LCDC_LCPR_CYP(x) (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LCPR_CXP(x) (((x)&0x000003FF)<<16)
-#define MCF_LCDC_LCPR_OP (0x10000000)
-#define MCF_LCDC_LCPR_CC(x) (((x)&0x00000003)<<30)
-#define MCF_LCDC_LCPR_CC_TRANSPARENT (0x00000000)
-#define MCF_LCDC_LCPR_CC_OR (0x40000000)
-#define MCF_LCDC_LCPR_CC_XOR (0x80000000)
-#define MCF_LCDC_LCPR_CC_AND (0xC0000000)
-#define MCF_LCDC_LCPR_OP_ON (0x10000000)
-#define MCF_LCDC_LCPR_OP_OFF (0x00000000)
-
-/* Bit definitions and macros for MCF_LCDC_LCWHBR */
-#define MCF_LCDC_LCWHBR_BD(x) (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LCWHBR_CH(x) (((x)&0x0000001F)<<16)
-#define MCF_LCDC_LCWHBR_CW(x) (((x)&0x0000001F)<<24)
-#define MCF_LCDC_LCWHBR_BK_EN (0x80000000)
-#define MCF_LCDC_LCWHBR_BK_EN_ON (0x80000000)
-#define MCF_LCDC_LCWHBR_BK_EN_OFF (0x00000000)
-
-/* Bit definitions and macros for MCF_LCDC_LCCMR */
-#define MCF_LCDC_LCCMR_CUR_COL_B(x) (((x)&0x0000003F)<<0)
-#define MCF_LCDC_LCCMR_CUR_COL_G(x) (((x)&0x0000003F)<<6)
-#define MCF_LCDC_LCCMR_CUR_COL_R(x) (((x)&0x0000003F)<<12)
-
-/* Bit definitions and macros for MCF_LCDC_LPCR */
-#define MCF_LCDC_LPCR_PCD(x) (((x)&0x0000003F)<<0)
-#define MCF_LCDC_LPCR_SHARP (0x00000040)
-#define MCF_LCDC_LPCR_SCLKSEL (0x00000080)
-#define MCF_LCDC_LPCR_ACD(x) (((x)&0x0000007F)<<8)
-#define MCF_LCDC_LPCR_ACDSEL (0x00008000)
-#define MCF_LCDC_LPCR_REV_VS (0x00010000)
-#define MCF_LCDC_LPCR_SWAP_SEL (0x00020000)
-#define MCF_LCDC_LPCR_ENDSEL (0x00040000)
-#define MCF_LCDC_LPCR_SCLKIDLE (0x00080000)
-#define MCF_LCDC_LPCR_OEPOL (0x00100000)
-#define MCF_LCDC_LPCR_CLKPOL (0x00200000)
-#define MCF_LCDC_LPCR_LPPOL (0x00400000)
-#define MCF_LCDC_LPCR_FLM (0x00800000)
-#define MCF_LCDC_LPCR_PIXPOL (0x01000000)
-#define MCF_LCDC_LPCR_BPIX(x) (((x)&0x00000007)<<25)
-#define MCF_LCDC_LPCR_PBSIZ(x) (((x)&0x00000003)<<28)
-#define MCF_LCDC_LPCR_COLOR (0x40000000)
-#define MCF_LCDC_LPCR_TFT (0x80000000)
-#define MCF_LCDC_LPCR_MODE_MONOCGROME (0x00000000)
-#define MCF_LCDC_LPCR_MODE_CSTN (0x40000000)
-#define MCF_LCDC_LPCR_MODE_TFT (0xC0000000)
-#define MCF_LCDC_LPCR_PBSIZ_1 (0x00000000)
-#define MCF_LCDC_LPCR_PBSIZ_2 (0x10000000)
-#define MCF_LCDC_LPCR_PBSIZ_4 (0x20000000)
-#define MCF_LCDC_LPCR_PBSIZ_8 (0x30000000)
-#define MCF_LCDC_LPCR_BPIX_1bpp (0x00000000)
-#define MCF_LCDC_LPCR_BPIX_2bpp (0x02000000)
-#define MCF_LCDC_LPCR_BPIX_4bpp (0x04000000)
-#define MCF_LCDC_LPCR_BPIX_8bpp (0x06000000)
-#define MCF_LCDC_LPCR_BPIX_12bpp (0x08000000)
-#define MCF_LCDC_LPCR_BPIX_16bpp (0x0A000000)
-#define MCF_LCDC_LPCR_BPIX_18bpp (0x0C000000)
-
-#define MCF_LCDC_LPCR_PANEL_TYPE(x) (((x)&0x00000003)<<30)
-
-/* Bit definitions and macros for MCF_LCDC_LHCR */
-#define MCF_LCDC_LHCR_H_WAIT_2(x) (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LHCR_H_WAIT_1(x) (((x)&0x000000FF)<<8)
-#define MCF_LCDC_LHCR_H_WIDTH(x) (((x)&0x0000003F)<<26)
-
-/* Bit definitions and macros for MCF_LCDC_LVCR */
-#define MCF_LCDC_LVCR_V_WAIT_2(x) (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LVCR_V_WAIT_1(x) (((x)&0x000000FF)<<8)
-#define MCF_LCDC_LVCR_V_WIDTH(x) (((x)&0x0000003F)<<26)
-
-/* Bit definitions and macros for MCF_LCDC_LPOR */
-#define MCF_LCDC_LPOR_POS(x) (((x)&0x0000001F)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LPCCR */
-#define MCF_LCDC_LPCCR_PW(x) (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LPCCR_CC_EN (0x00000100)
-#define MCF_LCDC_LPCCR_SCR(x) (((x)&0x00000003)<<9)
-#define MCF_LCDC_LPCCR_LDMSK (0x00008000)
-#define MCF_LCDC_LPCCR_CLS_HI_WIDTH(x) (((x)&0x000001FF)<<16)
-#define MCF_LCDC_LPCCR_SCR_LINEPULSE (0x00000000)
-#define MCF_LCDC_LPCCR_SCR_PIXELCLK (0x00002000)
-#define MCF_LCDC_LPCCR_SCR_LCDCLOCK (0x00004000)
-
-/* Bit definitions and macros for MCF_LCDC_LDCR */
-#define MCF_LCDC_LDCR_TM(x) (((x)&0x0000001F)<<0)
-#define MCF_LCDC_LDCR_HM(x) (((x)&0x0000001F)<<16)
-#define MCF_LCDC_LDCR_BURST (0x80000000)
-
-/* Bit definitions and macros for MCF_LCDC_LRMCR */
-#define MCF_LCDC_LRMCR_SEL_REF (0x00000001)
-
-/* Bit definitions and macros for MCF_LCDC_LICR */
-#define MCF_LCDC_LICR_INTCON (0x00000001)
-#define MCF_LCDC_LICR_INTSYN (0x00000004)
-#define MCF_LCDC_LICR_GW_INT_CON (0x00000010)
-
-/* Bit definitions and macros for MCF_LCDC_LIER */
-#define MCF_LCDC_LIER_BOF_EN (0x00000001)
-#define MCF_LCDC_LIER_EOF_EN (0x00000002)
-#define MCF_LCDC_LIER_ERR_RES_EN (0x00000004)
-#define MCF_LCDC_LIER_UDR_ERR_EN (0x00000008)
-#define MCF_LCDC_LIER_GW_BOF_EN (0x00000010)
-#define MCF_LCDC_LIER_GW_EOF_EN (0x00000020)
-#define MCF_LCDC_LIER_GW_ERR_RES_EN (0x00000040)
-#define MCF_LCDC_LIER_GW_UDR_ERR_EN (0x00000080)
-
-/* Bit definitions and macros for MCF_LCDC_LISR */
-#define MCF_LCDC_LISR_BOF (0x00000001)
-#define MCF_LCDC_LISR_EOF (0x00000002)
-#define MCF_LCDC_LISR_ERR_RES (0x00000004)
-#define MCF_LCDC_LISR_UDR_ERR (0x00000008)
-#define MCF_LCDC_LISR_GW_BOF (0x00000010)
-#define MCF_LCDC_LISR_GW_EOF (0x00000020)
-#define MCF_LCDC_LISR_GW_ERR_RES (0x00000040)
-#define MCF_LCDC_LISR_GW_UDR_ERR (0x00000080)
-
-/* Bit definitions and macros for MCF_LCDC_LGWSAR */
-#define MCF_LCDC_LGWSAR_GWSA(x) (((x)&0x3FFFFFFF)<<2)
-
-/* Bit definitions and macros for MCF_LCDC_LGWSR */
-#define MCF_LCDC_LGWSR_GWH(x) (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LGWSR_GWW(x) (((x)&0x0000003F)<<20)
-
-/* Bit definitions and macros for MCF_LCDC_LGWVPWR */
-#define MCF_LCDC_LGWVPWR_GWVPW(x) (((x)&0x000003FF)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LGWPOR */
-#define MCF_LCDC_LGWPOR_GWPO(x) (((x)&0x0000001F)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LGWPR */
-#define MCF_LCDC_LGWPR_GWYP(x) (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LGWPR_GWXP(x) (((x)&0x000003FF)<<16)
-
-/* Bit definitions and macros for MCF_LCDC_LGWCR */
-#define MCF_LCDC_LGWCR_GWCKB(x) (((x)&0x0000003F)<<0)
-#define MCF_LCDC_LGWCR_GWCKG(x) (((x)&0x0000003F)<<6)
-#define MCF_LCDC_LGWCR_GWCKR(x) (((x)&0x0000003F)<<12)
-#define MCF_LCDC_LGWCR_GW_RVS (0x00200000)
-#define MCF_LCDC_LGWCR_GWE (0x00400000)
-#define MCF_LCDC_LGWCR_GWCKE (0x00800000)
-#define MCF_LCDC_LGWCR_GWAV(x) (((x)&0x000000FF)<<24)
-
-/* Bit definitions and macros for MCF_LCDC_LGWDCR */
-#define MCF_LCDC_LGWDCR_GWTM(x) (((x)&0x0000001F)<<0)
-#define MCF_LCDC_LGWDCR_GWHM(x) (((x)&0x0000001F)<<16)
-#define MCF_LCDC_LGWDCR_GWBT (0x80000000)
-
-/* Bit definitions and macros for MCF_LCDC_LSCR */
-#define MCF_LCDC_LSCR_PS_RISE_DELAY(x) (((x)&0x0000003F)<<26)
-#define MCF_LCDC_LSCR_CLS_RISE_DELAY(x) (((x)&0x000000FF)<<16)
-#define MCF_LCDC_LSCR_REV_TOGGLE_DELAY(x) (((x)&0x0000000F)<<8)
-#define MCF_LCDC_LSCR_GRAY_2(x) (((x)&0x0000000F)<<4)
-#define MCF_LCDC_LSCR_GRAY_1(x) (((x)&0x0000000F)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_BPLUT_BASE */
-#define MCF_LCDC_BPLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_GWLUT_BASE */
-#define MCF_LCDC_GWLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0)
-
-/*********************************************************************
- *
- * Phase Locked Loop (PLL)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_PLL_PODR MCF_REG08(0xFC0C0000)
-#define MCF_PLL_PLLCR MCF_REG08(0xFC0C0004)
-#define MCF_PLL_PMDR MCF_REG08(0xFC0C0008)
-#define MCF_PLL_PFDR MCF_REG08(0xFC0C000C)
-
-/* Bit definitions and macros for MCF_PLL_PODR */
-#define MCF_PLL_PODR_BUSDIV(x) (((x)&0x0F)<<0)
-#define MCF_PLL_PODR_CPUDIV(x) (((x)&0x0F)<<4)
-
-/* Bit definitions and macros for MCF_PLL_PLLCR */
-#define MCF_PLL_PLLCR_DITHDEV(x) (((x)&0x07)<<0)
-#define MCF_PLL_PLLCR_DITHEN (0x80)
-
-/* Bit definitions and macros for MCF_PLL_PMDR */
-#define MCF_PLL_PMDR_MODDIV(x) (((x)&0xFF)<<0)
-
-/* Bit definitions and macros for MCF_PLL_PFDR */
-#define MCF_PLL_PFDR_MFD(x) (((x)&0xFF)<<0)
-
-/*********************************************************************
- *
- * System Control Module Registers (SCM)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_SCM_MPR MCF_REG32(0xFC000000)
-#define MCF_SCM_PACRA MCF_REG32(0xFC000020)
-#define MCF_SCM_PACRB MCF_REG32(0xFC000024)
-#define MCF_SCM_PACRC MCF_REG32(0xFC000028)
-#define MCF_SCM_PACRD MCF_REG32(0xFC00002C)
-#define MCF_SCM_PACRE MCF_REG32(0xFC000040)
-#define MCF_SCM_PACRF MCF_REG32(0xFC000044)
-
-#define MCF_SCM_BCR MCF_REG32(0xFC040024)
-
-/*********************************************************************
- *
- * SDRAM Controller (SDRAMC)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_SDRAMC_SDMR MCF_REG32(0xFC0B8000)
-#define MCF_SDRAMC_SDCR MCF_REG32(0xFC0B8004)
-#define MCF_SDRAMC_SDCFG1 MCF_REG32(0xFC0B8008)
-#define MCF_SDRAMC_SDCFG2 MCF_REG32(0xFC0B800C)
-#define MCF_SDRAMC_LIMP_FIX MCF_REG32(0xFC0B8080)
-#define MCF_SDRAMC_SDDS MCF_REG32(0xFC0B8100)
-#define MCF_SDRAMC_SDCS0 MCF_REG32(0xFC0B8110)
-#define MCF_SDRAMC_SDCS1 MCF_REG32(0xFC0B8114)
-#define MCF_SDRAMC_SDCS2 MCF_REG32(0xFC0B8118)
-#define MCF_SDRAMC_SDCS3 MCF_REG32(0xFC0B811C)
-#define MCF_SDRAMC_SDCS(x) MCF_REG32(0xFC0B8110+((x)*0x004))
-
-/* Bit definitions and macros for MCF_SDRAMC_SDMR */
-#define MCF_SDRAMC_SDMR_CMD (0x00010000)
-#define MCF_SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18)
-#define MCF_SDRAMC_SDMR_BNKAD(x) (((x)&0x00000003)<<30)
-#define MCF_SDRAMC_SDMR_BNKAD_LMR (0x00000000)
-#define MCF_SDRAMC_SDMR_BNKAD_LEMR (0x40000000)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCR */
-#define MCF_SDRAMC_SDCR_IPALL (0x00000002)
-#define MCF_SDRAMC_SDCR_IREF (0x00000004)
-#define MCF_SDRAMC_SDCR_DQS_OE(x) (((x)&0x0000000F)<<8)
-#define MCF_SDRAMC_SDCR_PS(x) (((x)&0x00000003)<<12)
-#define MCF_SDRAMC_SDCR_RCNT(x) (((x)&0x0000003F)<<16)
-#define MCF_SDRAMC_SDCR_OE_RULE (0x00400000)
-#define MCF_SDRAMC_SDCR_MUX(x) (((x)&0x00000003)<<24)
-#define MCF_SDRAMC_SDCR_REF (0x10000000)
-#define MCF_SDRAMC_SDCR_DDR (0x20000000)
-#define MCF_SDRAMC_SDCR_CKE (0x40000000)
-#define MCF_SDRAMC_SDCR_MODE_EN (0x80000000)
-#define MCF_SDRAMC_SDCR_PS_16 (0x00002000)
-#define MCF_SDRAMC_SDCR_PS_32 (0x00000000)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCFG1 */
-#define MCF_SDRAMC_SDCFG1_WTLAT(x) (((x)&0x00000007)<<4)
-#define MCF_SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8)
-#define MCF_SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12)
-#define MCF_SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16)
-#define MCF_SDRAMC_SDCFG1_RDLAT(x) (((x)&0x0000000F)<<20)
-#define MCF_SDRAMC_SDCFG1_SWT2RD(x) (((x)&0x00000007)<<24)
-#define MCF_SDRAMC_SDCFG1_SRD2RW(x) (((x)&0x0000000F)<<28)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCFG2 */
-#define MCF_SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16)
-#define MCF_SDRAMC_SDCFG2_BRD2WT(x) (((x)&0x0000000F)<<20)
-#define MCF_SDRAMC_SDCFG2_BWT2RW(x) (((x)&0x0000000F)<<24)
-#define MCF_SDRAMC_SDCFG2_BRD2PRE(x) (((x)&0x0000000F)<<28)
-
-/* Device Errata - LIMP mode work around */
-#define MCF_SDRAMC_REFRESH (0x40000000)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDDS */
-#define MCF_SDRAMC_SDDS_SB_D(x) (((x)&0x00000003)<<0)
-#define MCF_SDRAMC_SDDS_SB_S(x) (((x)&0x00000003)<<2)
-#define MCF_SDRAMC_SDDS_SB_A(x) (((x)&0x00000003)<<4)
-#define MCF_SDRAMC_SDDS_SB_C(x) (((x)&0x00000003)<<6)
-#define MCF_SDRAMC_SDDS_SB_E(x) (((x)&0x00000003)<<8)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCS */
-#define MCF_SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)<<0)
-#define MCF_SDRAMC_SDCS_BASE(x) (((x)&0x00000FFF)<<20)
-#define MCF_SDRAMC_SDCS_BA(x) ((x)&0xFFF00000)
-#define MCF_SDRAMC_SDCS_CSSZ_DIABLE (0x00000000)
-#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013)
-#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014)
-#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015)
-#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016)
-#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017)
-#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018)
-#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019)
-#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A)
-#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B)
-#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C)
-#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D)
-#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E)
-#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F)
-
-/*********************************************************************
- *
- * FlexCAN module registers
- *
- *********************************************************************/
-#define MCF_FLEXCAN_BASEADDR(x) (0xFC020000+(x)*0x0800)
-#define MCF_FLEXCAN_CANMCR(x) MCF_REG32(0xFC020000+(x)*0x0800+0x00)
-#define MCF_FLEXCAN_CANCTRL(x) MCF_REG32(0xFC020000+(x)*0x0800+0x04)
-#define MCF_FLEXCAN_TIMER(x) MCF_REG32(0xFC020000+(x)*0x0800+0x08)
-#define MCF_FLEXCAN_RXGMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x10)
-#define MCF_FLEXCAN_RX14MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x14)
-#define MCF_FLEXCAN_RX15MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x18)
-#define MCF_FLEXCAN_ERRCNT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x1C)
-#define MCF_FLEXCAN_ERRSTAT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x20)
-#define MCF_FLEXCAN_IMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x28)
-#define MCF_FLEXCAN_IFLAG(x) MCF_REG32(0xFC020000+(x)*0x0800+0x30)
-
-#define MCF_FLEXCAN_MB_CNT(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x0)
-#define MCF_FLEXCAN_MB_ID(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x4)
-#define MCF_FLEXCAN_MB_DB(x,y,z) MCF_REG08(0xFC020080+(x)*0x0800+(y)*0x10+0x8+(z)*0x1)
-
-/*
- * FlexCAN Module Configuration Register
- */
-#define CANMCR_MDIS (0x80000000)
-#define CANMCR_FRZ (0x40000000)
-#define CANMCR_HALT (0x10000000)
-#define CANMCR_SOFTRST (0x02000000)
-#define CANMCR_FRZACK (0x01000000)
-#define CANMCR_SUPV (0x00800000)
-#define CANMCR_MAXMB(x) ((x)&0x0F)
-
-/*
- * FlexCAN Control Register
- */
-#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24)
-#define CANCTRL_RJW(x) (((x)&0x03)<<22)
-#define CANCTRL_PSEG1(x) (((x)&0x07)<<19)
-#define CANCTRL_PSEG2(x) (((x)&0x07)<<16)
-#define CANCTRL_BOFFMSK (0x00008000)
-#define CANCTRL_ERRMSK (0x00004000)
-#define CANCTRL_CLKSRC (0x00002000)
-#define CANCTRL_LPB (0x00001000)
-#define CANCTRL_SAMP (0x00000080)
-#define CANCTRL_BOFFREC (0x00000040)
-#define CANCTRL_TSYNC (0x00000020)
-#define CANCTRL_LBUF (0x00000010)
-#define CANCTRL_LOM (0x00000008)
-#define CANCTRL_PROPSEG(x) ((x)&0x07)
-
-/*
- * FlexCAN Error Counter Register
- */
-#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8)
-#define ERRCNT_TXECTR(x) ((x)&0xFF)
-
-/*
- * FlexCAN Error and Status Register
- */
-#define ERRSTAT_BITERR(x) (((x)&0x03)<<14)
-#define ERRSTAT_ACKERR (0x00002000)
-#define ERRSTAT_CRCERR (0x00001000)
-#define ERRSTAT_FRMERR (0x00000800)
-#define ERRSTAT_STFERR (0x00000400)
-#define ERRSTAT_TXWRN (0x00000200)
-#define ERRSTAT_RXWRN (0x00000100)
-#define ERRSTAT_IDLE (0x00000080)
-#define ERRSTAT_TXRX (0x00000040)
-#define ERRSTAT_FLTCONF(x) (((x)&0x03)<<4)
-#define ERRSTAT_BOFFINT (0x00000004)
-#define ERRSTAT_ERRINT (0x00000002)
-
-/*
- * Interrupt Mask Register
- */
-#define IMASK_BUF15M (0x8000)
-#define IMASK_BUF14M (0x4000)
-#define IMASK_BUF13M (0x2000)
-#define IMASK_BUF12M (0x1000)
-#define IMASK_BUF11M (0x0800)
-#define IMASK_BUF10M (0x0400)
-#define IMASK_BUF9M (0x0200)
-#define IMASK_BUF8M (0x0100)
-#define IMASK_BUF7M (0x0080)
-#define IMASK_BUF6M (0x0040)
-#define IMASK_BUF5M (0x0020)
-#define IMASK_BUF4M (0x0010)
-#define IMASK_BUF3M (0x0008)
-#define IMASK_BUF2M (0x0004)
-#define IMASK_BUF1M (0x0002)
-#define IMASK_BUF0M (0x0001)
-#define IMASK_BUFnM(x) (0x1<<(x))
-#define IMASK_BUFF_ENABLE_ALL (0x1111)
-#define IMASK_BUFF_DISABLE_ALL (0x0000)
-
-/*
- * Interrupt Flag Register
- */
-#define IFLAG_BUF15M (0x8000)
-#define IFLAG_BUF14M (0x4000)
-#define IFLAG_BUF13M (0x2000)
-#define IFLAG_BUF12M (0x1000)
-#define IFLAG_BUF11M (0x0800)
-#define IFLAG_BUF10M (0x0400)
-#define IFLAG_BUF9M (0x0200)
-#define IFLAG_BUF8M (0x0100)
-#define IFLAG_BUF7M (0x0080)
-#define IFLAG_BUF6M (0x0040)
-#define IFLAG_BUF5M (0x0020)
-#define IFLAG_BUF4M (0x0010)
-#define IFLAG_BUF3M (0x0008)
-#define IFLAG_BUF2M (0x0004)
-#define IFLAG_BUF1M (0x0002)
-#define IFLAG_BUF0M (0x0001)
-#define IFLAG_BUFF_SET_ALL (0xFFFF)
-#define IFLAG_BUFF_CLEAR_ALL (0x0000)
-#define IFLAG_BUFnM(x) (0x1<<(x))
-
-/*
- * Message Buffers
- */
-#define MB_CNT_CODE(x) (((x)&0x0F)<<24)
-#define MB_CNT_SRR (0x00400000)
-#define MB_CNT_IDE (0x00200000)
-#define MB_CNT_RTR (0x00100000)
-#define MB_CNT_LENGTH(x) (((x)&0x0F)<<16)
-#define MB_CNT_TIMESTAMP(x) ((x)&0xFFFF)
-#define MB_ID_STD(x) (((x)&0x07FF)<<18)
-#define MB_ID_EXT(x) ((x)&0x3FFFF)
-
-/*********************************************************************
- *
- * Edge Port Module (EPORT)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_EPORT_EPPAR MCF_REG16(0xFC094000)
-#define MCF_EPORT_EPDDR MCF_REG08(0xFC094002)
-#define MCF_EPORT_EPIER MCF_REG08(0xFC094003)
-#define MCF_EPORT_EPDR MCF_REG08(0xFC094004)
-#define MCF_EPORT_EPPDR MCF_REG08(0xFC094005)
-#define MCF_EPORT_EPFR MCF_REG08(0xFC094006)
-
-/* Bit definitions and macros for MCF_EPORT_EPPAR */
-#define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2)
-#define MCF_EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4)
-#define MCF_EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6)
-#define MCF_EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8)
-#define MCF_EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10)
-#define MCF_EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12)
-#define MCF_EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14)
-#define MCF_EPORT_EPPAR_LEVEL (0)
-#define MCF_EPORT_EPPAR_RISING (1)
-#define MCF_EPORT_EPPAR_FALLING (2)
-#define MCF_EPORT_EPPAR_BOTH (3)
-#define MCF_EPORT_EPPAR_EPPA7_LEVEL (0x0000)
-#define MCF_EPORT_EPPAR_EPPA7_RISING (0x4000)
-#define MCF_EPORT_EPPAR_EPPA7_FALLING (0x8000)
-#define MCF_EPORT_EPPAR_EPPA7_BOTH (0xC000)
-#define MCF_EPORT_EPPAR_EPPA6_LEVEL (0x0000)
-#define MCF_EPORT_EPPAR_EPPA6_RISING (0x1000)
-#define MCF_EPORT_EPPAR_EPPA6_FALLING (0x2000)
-#define MCF_EPORT_EPPAR_EPPA6_BOTH (0x3000)
-#define MCF_EPORT_EPPAR_EPPA5_LEVEL (0x0000)
-#define MCF_EPORT_EPPAR_EPPA5_RISING (0x0400)
-#define MCF_EPORT_EPPAR_EPPA5_FALLING (0x0800)
-#define MCF_EPORT_EPPAR_EPPA5_BOTH (0x0C00)
-#define MCF_EPORT_EPPAR_EPPA4_LEVEL (0x0000)
-#define MCF_EPORT_EPPAR_EPPA4_RISING (0x0100)
-#define MCF_EPORT_EPPAR_EPPA4_FALLING (0x0200)
-#define MCF_EPORT_EPPAR_EPPA4_BOTH (0x0300)
-#define MCF_EPORT_EPPAR_EPPA3_LEVEL (0x0000)
-#define MCF_EPORT_EPPAR_EPPA3_RISING (0x0040)
-#define MCF_EPORT_EPPAR_EPPA3_FALLING (0x0080)
-#define MCF_EPORT_EPPAR_EPPA3_BOTH (0x00C0)
-#define MCF_EPORT_EPPAR_EPPA2_LEVEL (0x0000)
-#define MCF_EPORT_EPPAR_EPPA2_RISING (0x0010)
-#define MCF_EPORT_EPPAR_EPPA2_FALLING (0x0020)
-#define MCF_EPORT_EPPAR_EPPA2_BOTH (0x0030)
-#define MCF_EPORT_EPPAR_EPPA1_LEVEL (0x0000)
-#define MCF_EPORT_EPPAR_EPPA1_RISING (0x0004)
-#define MCF_EPORT_EPPAR_EPPA1_FALLING (0x0008)
-#define MCF_EPORT_EPPAR_EPPA1_BOTH (0x000C)
-
-/* Bit definitions and macros for MCF_EPORT_EPDDR */
-#define MCF_EPORT_EPDDR_EPDD1 (0x02)
-#define MCF_EPORT_EPDDR_EPDD2 (0x04)
-#define MCF_EPORT_EPDDR_EPDD3 (0x08)
-#define MCF_EPORT_EPDDR_EPDD4 (0x10)
-#define MCF_EPORT_EPDDR_EPDD5 (0x20)
-#define MCF_EPORT_EPDDR_EPDD6 (0x40)
-#define MCF_EPORT_EPDDR_EPDD7 (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPIER */
-#define MCF_EPORT_EPIER_EPIE1 (0x02)
-#define MCF_EPORT_EPIER_EPIE2 (0x04)
-#define MCF_EPORT_EPIER_EPIE3 (0x08)
-#define MCF_EPORT_EPIER_EPIE4 (0x10)
-#define MCF_EPORT_EPIER_EPIE5 (0x20)
-#define MCF_EPORT_EPIER_EPIE6 (0x40)
-#define MCF_EPORT_EPIER_EPIE7 (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPDR */
-#define MCF_EPORT_EPDR_EPD1 (0x02)
-#define MCF_EPORT_EPDR_EPD2 (0x04)
-#define MCF_EPORT_EPDR_EPD3 (0x08)
-#define MCF_EPORT_EPDR_EPD4 (0x10)
-#define MCF_EPORT_EPDR_EPD5 (0x20)
-#define MCF_EPORT_EPDR_EPD6 (0x40)
-#define MCF_EPORT_EPDR_EPD7 (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPPDR */
-#define MCF_EPORT_EPPDR_EPPD1 (0x02)
-#define MCF_EPORT_EPPDR_EPPD2 (0x04)
-#define MCF_EPORT_EPPDR_EPPD3 (0x08)
-#define MCF_EPORT_EPPDR_EPPD4 (0x10)
-#define MCF_EPORT_EPPDR_EPPD5 (0x20)
-#define MCF_EPORT_EPPDR_EPPD6 (0x40)
-#define MCF_EPORT_EPPDR_EPPD7 (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPFR */
-#define MCF_EPORT_EPFR_EPF1 (0x02)
-#define MCF_EPORT_EPFR_EPF2 (0x04)
-#define MCF_EPORT_EPFR_EPF3 (0x08)
-#define MCF_EPORT_EPFR_EPF4 (0x10)
-#define MCF_EPORT_EPFR_EPF5 (0x20)
-#define MCF_EPORT_EPFR_EPF6 (0x40)
-#define MCF_EPORT_EPFR_EPF7 (0x80)
-
-/********************************************************************/
-#endif /* m532xsim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * m5407sim.h -- ColdFire 5407 System Integration Module support.
- *
- * (C) Copyright 2000, Lineo (www.lineo.com)
- * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd.
- *
- * Modified by David W. Miller for the MCF5307 Eval Board.
- */
-
-/****************************************************************************/
-#ifndef m5407sim_h
-#define m5407sim_h
-/****************************************************************************/
-
-/*
- * Define the 5407 SIM register set addresses.
- */
-#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */
-#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/
-#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */
-#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */
-#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */
-#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */
-#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/
-#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/
-#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */
-#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */
-#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */
-#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */
-#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */
-#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */
-#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */
-#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */
-#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */
-#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */
-#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */
-#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */
-#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */
-#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */
-#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
-
-#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */
-#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
-#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */
-#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */
-#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */
-#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */
-#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */
-#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
-
-#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */
-#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
-
-#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */
-#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */
-
-
-/*
- * Some symbol defines for the above...
- */
-#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
-#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
-#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
-#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
-#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
-#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
-#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
-#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
-#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
-
-/*
- * Macro to set IMR register. It is 32 bits on the 5407.
- */
-#define mcf_getimr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define mcf_setimr(imr) \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define mcf_getipr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-
-/*
- * Some symbol defines for the Parallel Port Pin Assignment Register
- */
-#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */
- /* Clear to select par I/O */
-#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */
- /* Clear to select par I/O */
-
-/*
- * Defines for the IRQPAR Register
- */
-#define IRQ5_LEVEL4 0x80
-#define IRQ3_LEVEL6 0x40
-#define IRQ1_LEVEL2 0x20
-
-
-/*
- * Define the Cache register flags.
- */
-#define CACR_DEC 0x80000000 /* Enable data cache */
-#define CACR_DWP 0x40000000 /* Data write protection */
-#define CACR_DESB 0x20000000 /* Enable data store buffer */
-#define CACR_DDPI 0x10000000 /* Disable CPUSHL */
-#define CACR_DHCLK 0x08000000 /* Half data cache lock mode */
-#define CACR_DDCM_WT 0x00000000 /* Write through cache*/
-#define CACR_DDCM_CP 0x02000000 /* Copyback cache */
-#define CACR_DDCM_P 0x04000000 /* No cache, precise */
-#define CACR_DDCM_IMP 0x06000000 /* No cache, imprecise */
-#define CACR_DCINVA 0x01000000 /* Invalidate data cache */
-#define CACR_BEC 0x00080000 /* Enable branch cache */
-#define CACR_BCINVA 0x00040000 /* Invalidate branch cache */
-#define CACR_IEC 0x00008000 /* Enable instruction cache */
-#define CACR_DNFB 0x00002000 /* Inhibited fill buffer */
-#define CACR_IDPI 0x00001000 /* Disable CPUSHL */
-#define CACR_IHLCK 0x00000800 /* Intruction cache half lock */
-#define CACR_IDCM 0x00000400 /* Intruction cache inhibit */
-#define CACR_ICINVA 0x00000100 /* Invalidate instr cache */
-
-#define ACR_BASE_POS 24 /* Address Base */
-#define ACR_MASK_POS 16 /* Address Mask */
-#define ACR_ENABLE 0x00008000 /* Enable address */
-#define ACR_USER 0x00000000 /* User mode access only */
-#define ACR_SUPER 0x00002000 /* Supervisor mode only */
-#define ACR_ANY 0x00004000 /* Match any access mode */
-#define ACR_CM_WT 0x00000000 /* Write through mode */
-#define ACR_CM_CP 0x00000020 /* Copyback mode */
-#define ACR_CM_OFF_PRE 0x00000040 /* No cache, precise */
-#define ACR_CM_OFF_IMP 0x00000060 /* No cache, imprecise */
-#define ACR_WPROTECT 0x00000004 /* Write protect */
-
-/****************************************************************************/
-#endif /* m5407sim_h */
+++ /dev/null
-#include "m68360_regs.h"
-#include "m68360_pram.h"
-#include "m68360_quicc.h"
-#include "m68360_enet.h"
-
-#ifdef CONFIG_M68360
-
-#define CPM_INTERRUPT 4
-
-/* see MC68360 User's Manual, p. 7-377 */
-#define CPM_VECTOR_BASE 0x04 /* 3 MSbits of CPM vector */
-
-#endif /* CONFIG_M68360 */
+++ /dev/null
-/***********************************
- * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions for the ETHERNET controllers
- ***************************************
- */
-
-#ifndef __ETHER_H
-#define __ETHER_H
-
-#include "quicc_simple.h"
-
-/*
- * transmit BD's
- */
-#define T_R 0x8000 /* ready bit */
-#define E_T_PAD 0x4000 /* short frame padding */
-#define T_W 0x2000 /* wrap bit */
-#define T_I 0x1000 /* interrupt on completion */
-#define T_L 0x0800 /* last in frame */
-#define T_TC 0x0400 /* transmit CRC (when last) */
-
-#define T_DEF 0x0200 /* defer indication */
-#define T_HB 0x0100 /* heartbeat */
-#define T_LC 0x0080 /* error: late collision */
-#define T_RL 0x0040 /* error: retransmission limit */
-#define T_RC 0x003c /* retry count */
-#define T_UN 0x0002 /* error: underrun */
-#define T_CSL 0x0001 /* carier sense lost */
-#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL)
-
-/*
- * receive BD's
- */
-#define R_E 0x8000 /* buffer empty */
-#define R_W 0x2000 /* wrap bit */
-#define R_I 0x1000 /* interrupt on reception */
-#define R_L 0x0800 /* last BD in frame */
-#define R_F 0x0400 /* first BD in frame */
-#define R_M 0x0100 /* received because of promisc. mode */
-
-#define R_LG 0x0020 /* frame too long */
-#define R_NO 0x0010 /* non-octet aligned */
-#define R_SH 0x0008 /* short frame */
-#define R_CR 0x0004 /* receive CRC error */
-#define R_OV 0x0002 /* receive overrun */
-#define R_CL 0x0001 /* collision */
-#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL)
-
-
-/*
- * ethernet interrupts
- */
-#define ETHERNET_GRA 0x0080 /* graceful stop complete */
-#define ETHERNET_TXE 0x0010 /* transmit error */
-#define ETHERNET_RXF 0x0008 /* receive frame */
-#define ETHERNET_BSY 0x0004 /* busy condition */
-#define ETHERNET_TXB 0x0002 /* transmit buffer */
-#define ETHERNET_RXB 0x0001 /* receive buffer */
-
-/*
- * ethernet protocol specific mode register (PSMR)
- */
-#define ETHER_HBC 0x8000 /* heartbeat checking */
-#define ETHER_FC 0x4000 /* force collision */
-#define ETHER_RSH 0x2000 /* receive short frames */
-#define ETHER_IAM 0x1000 /* individual address mode */
-#define ETHER_CRC_32 (0x2<<10) /* Enable CRC */
-#define ETHER_PRO 0x0200 /* promiscuous */
-#define ETHER_BRO 0x0100 /* broadcast address */
-#define ETHER_SBT 0x0080 /* stop backoff timer */
-#define ETHER_LPB 0x0040 /* Loop Back Mode */
-#define ETHER_SIP 0x0020 /* sample input pins */
-#define ETHER_LCW 0x0010 /* late collision window */
-#define ETHER_NIB_13 (0x0<<1) /* # of ignored bits 13 */
-#define ETHER_NIB_14 (0x1<<1) /* # of ignored bits 14 */
-#define ETHER_NIB_15 (0x2<<1) /* # of ignored bits 15 */
-#define ETHER_NIB_16 (0x3<<1) /* # of ignored bits 16 */
-#define ETHER_NIB_21 (0x4<<1) /* # of ignored bits 21 */
-#define ETHER_NIB_22 (0x5<<1) /* # of ignored bits 22 */
-#define ETHER_NIB_23 (0x6<<1) /* # of ignored bits 23 */
-#define ETHER_NIB_24 (0x7<<1) /* # of ignored bits 24 */
-
-/*
- * ethernet specific parameters
- */
-#define CRC_WORD 4 /* Length in bytes of CRC */
-#define C_PRES 0xffffffff /* preform 32 bit CRC */
-#define C_MASK 0xdebb20e3 /* comply with 32 bit CRC */
-#define CRCEC 0x00000000
-#define ALEC 0x00000000
-#define DISFC 0x00000000
-#define PADS 0x00000000
-#define RET_LIM 0x000f /* retry 15 times to send a frame before interrupt */
-#define ETH_MFLR 0x05ee /* 1518 max frame size */
-#define MINFLR 0x0040 /* Minimum frame size 64 */
-#define MAXD1 0x05ee /* Max dma count 1518 */
-#define MAXD2 0x05ee
-#define GADDR1 0x00000000 /* Clear group address */
-#define GADDR2 0x00000000
-#define GADDR3 0x00000000
-#define GADDR4 0x00000000
-#define P_PER 0x00000000 /*not used */
-#define IADDR1 0x00000000 /* Individual hash table not used */
-#define IADDR2 0x00000000
-#define IADDR3 0x00000000
-#define IADDR4 0x00000000
-#define TADDR_H 0x00000000 /* clear this regs */
-#define TADDR_M 0x00000000
-#define TADDR_L 0x00000000
-
-/* SCC Parameter Ram */
-#define RFCR 0x18 /* normal operation */
-#define TFCR 0x18 /* normal operation */
-#define E_MRBLR 1518 /* Max ethernet frame length */
-
-/*
- * ethernet specific structure
- */
-typedef union {
- unsigned char b[6];
- struct {
- unsigned short high;
- unsigned short middl;
- unsigned short low;
- } w;
-} ETHER_ADDR;
-
-typedef struct {
- int max_frame_length;
- int promisc_mode;
- int reject_broadcast;
- ETHER_ADDR phys_adr;
-} ETHER_SPECIFIC;
-
-typedef struct {
- ETHER_ADDR dst_addr;
- ETHER_ADDR src_addr;
- unsigned short type_or_len;
- unsigned char data[1];
-} ETHER_FRAME;
-
-#define MAX_DATALEN 1500
-typedef struct {
- ETHER_ADDR dst_addr;
- ETHER_ADDR src_addr;
- unsigned short type_or_len;
- unsigned char data[MAX_DATALEN];
- unsigned char fcs[CRC_WORD];
-} ETHER_MAX_FRAME;
-
-
-/*
- * Internal ethernet function prototypes
- */
-void ether_interrupt(int scc_num);
-/* mleslie: debug */
-/* static void ethernet_rx_internal(int scc_num); */
-/* static void ethernet_tx_internal(int scc_num); */
-
-/*
- * User callable routines prototypes (ethernet specific)
- */
-void ethernet_init(int scc_number,
- alloc_routine *alloc_buffer,
- free_routine *free_buffer,
- store_rx_buffer_routine *store_rx_buffer,
- handle_tx_error_routine *handle_tx_error,
- handle_rx_error_routine *handle_rx_error,
- handle_lost_error_routine *handle_lost_error,
- ETHER_SPECIFIC *ether_spec);
-int ethernet_tx(int scc_number, void *buf, int length);
-
-#endif
-
+++ /dev/null
-/***********************************
- * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of the parameter area RAM.
- * Note that different structures are overlaid
- * at the same offsets for the different modes
- * of operation.
- ***************************************
- */
-
-#ifndef __PRAM_H
-#define __PRAM_H
-
-/* Time slot assignment table */
-#define VALID_SLOT 0x8000
-#define WRAP_SLOT 0x4000
-
-/*****************************************************************
- Global Multichannel parameter RAM
-*****************************************************************/
-struct global_multi_pram {
- /*
- * Global Multichannel parameter RAM
- */
- unsigned long mcbase; /* Multichannel Base pointer */
- unsigned short qmcstate; /* Multichannel Controller state */
- unsigned short mrblr; /* Maximum Receive Buffer Length */
- unsigned short tx_s_ptr; /* TSTATx Pointer */
- unsigned short rxptr; /* Current Time slot entry in TSATRx */
- unsigned short grfthr; /* Global Receive frame threshold */
- unsigned short grfcnt; /* Global Receive Frame Count */
- unsigned long intbase; /* Multichannel Base address */
- unsigned long iintptr; /* Pointer to interrupt queue */
- unsigned short rx_s_ptr; /* TSTARx Pointer */
-
- unsigned short txptr; /* Current Time slot entry in TSATTx */
- unsigned long c_mask32; /* CRC Constant (debb20e3) */
- unsigned short tsatrx[32]; /* Time Slot Assignment Table Rx */
- unsigned short tsattx[32]; /* Time Slot Assignment Table Tx */
- unsigned short c_mask16; /* CRC Constant (f0b8) */
-};
-
-/*****************************************************************
- Quicc32 HDLC parameter RAM
-*****************************************************************/
-struct quicc32_pram {
-
- unsigned short tbase; /* Tx Buffer Descriptors Base Address */
- unsigned short chamr; /* Channel Mode Register */
- unsigned long tstate; /* Tx Internal State */
- unsigned long txintr; /* Tx Internal Data Pointer */
- unsigned short tbptr; /* Tx Buffer Descriptor Pointer */
- unsigned short txcntr; /* Tx Internal Byte Count */
- unsigned long tupack; /* (Tx Temp) */
- unsigned long zistate; /* Zero Insertion machine state */
- unsigned long tcrc; /* Temp Transmit CRC */
- unsigned short intmask; /* Channel's interrupt mask flags */
- unsigned short bdflags;
- unsigned short rbase; /* Rx Buffer Descriptors Base Address */
- unsigned short mflr; /* Max Frame Length Register */
- unsigned long rstate; /* Rx Internal State */
- unsigned long rxintr; /* Rx Internal Data Pointer */
- unsigned short rbptr; /* Rx Buffer Descriptor Pointer */
- unsigned short rxbyc; /* Rx Internal Byte Count */
- unsigned long rpack; /* (Rx Temp) */
- unsigned long zdstate; /* Zero Deletion machine state */
- unsigned long rcrc; /* Temp Transmit CRC */
- unsigned short maxc; /* Max_length counter */
- unsigned short tmp_mb; /* Temp */
-};
-
-
-/*****************************************************************
- HDLC parameter RAM
-*****************************************************************/
-
-struct hdlc_pram {
- /*
- * SCC parameter RAM
- */
- unsigned short rbase; /* RX BD base address */
- unsigned short tbase; /* TX BD base address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned long rcrc; /* temp receive CRC */
- unsigned long tcrc; /* temp transmit CRC */
-
- /*
- * HDLC specific parameter RAM
- */
- unsigned char RESERVED1[4]; /* Reserved area */
- unsigned long c_mask; /* CRC constant */
- unsigned long c_pres; /* CRC preset */
- unsigned short disfc; /* discarded frame counter */
- unsigned short crcec; /* CRC error counter */
- unsigned short abtsc; /* abort sequence counter */
- unsigned short nmarc; /* nonmatching address rx cnt */
- unsigned short retrc; /* frame retransmission cnt */
- unsigned short mflr; /* maximum frame length reg */
- unsigned short max_cnt; /* maximum length counter */
- unsigned short rfthr; /* received frames threshold */
- unsigned short rfcnt; /* received frames count */
- unsigned short hmask; /* user defined frm addr mask */
- unsigned short haddr1; /* user defined frm address 1 */
- unsigned short haddr2; /* user defined frm address 2 */
- unsigned short haddr3; /* user defined frm address 3 */
- unsigned short haddr4; /* user defined frm address 4 */
- unsigned short tmp; /* temp */
- unsigned short tmp_mb; /* temp */
-};
-
-
-
-/*****************************************************************
- UART parameter RAM
-*****************************************************************/
-
-/*
- * bits in uart control characters table
- */
-#define CC_INVALID 0x8000 /* control character is valid */
-#define CC_REJ 0x4000 /* don't store char in buffer */
-#define CC_CHAR 0x00ff /* control character */
-
-/* UART */
-struct uart_pram {
- /*
- * SCC parameter RAM
- */
- unsigned short rbase; /* RX BD base address */
- unsigned short tbase; /* TX BD base address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rx_temp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned long rcrc; /* temp receive CRC */
- unsigned long tcrc; /* temp transmit CRC */
-
- /*
- * UART specific parameter RAM
- */
- unsigned char RESERVED1[8]; /* Reserved area */
- unsigned short max_idl; /* maximum idle characters */
- unsigned short idlc; /* rx idle counter (internal) */
- unsigned short brkcr; /* break count register */
-
- unsigned short parec; /* Rx parity error counter */
- unsigned short frmer; /* Rx framing error counter */
- unsigned short nosec; /* Rx noise counter */
- unsigned short brkec; /* Rx break character counter */
- unsigned short brkln; /* Reaceive break length */
-
- unsigned short uaddr1; /* address character 1 */
- unsigned short uaddr2; /* address character 2 */
- unsigned short rtemp; /* temp storage */
- unsigned short toseq; /* Tx out of sequence char */
- unsigned short cc[8]; /* Rx control characters */
- unsigned short rccm; /* Rx control char mask */
- unsigned short rccr; /* Rx control char register */
- unsigned short rlbc; /* Receive last break char */
-};
-
-
-
-/*****************************************************************
- BISYNC parameter RAM
-*****************************************************************/
-
-struct bisync_pram {
- /*
- * SCC parameter RAM
- */
- unsigned short rbase; /* RX BD base address */
- unsigned short tbase; /* TX BD base address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned long rcrc; /* temp receive CRC */
- unsigned long tcrc; /* temp transmit CRC */
-
- /*
- * BISYNC specific parameter RAM
- */
- unsigned char RESERVED1[4]; /* Reserved area */
- unsigned long crcc; /* CRC Constant Temp Value */
- unsigned short prcrc; /* Preset Receiver CRC-16/LRC */
- unsigned short ptcrc; /* Preset Transmitter CRC-16/LRC */
- unsigned short parec; /* Receive Parity Error Counter */
- unsigned short bsync; /* BISYNC SYNC Character */
- unsigned short bdle; /* BISYNC DLE Character */
- unsigned short cc[8]; /* Rx control characters */
- unsigned short rccm; /* Receive Control Character Mask */
-};
-
-/*****************************************************************
- IOM2 parameter RAM
- (overlaid on tx bd[5] of SCC channel[2])
-*****************************************************************/
-struct iom2_pram {
- unsigned short ci_data; /* ci data */
- unsigned short monitor_data; /* monitor data */
- unsigned short tstate; /* transmitter state */
- unsigned short rstate; /* receiver state */
-};
-
-/*****************************************************************
- SPI/SMC parameter RAM
- (overlaid on tx bd[6,7] of SCC channel[2])
-*****************************************************************/
-
-#define SPI_R 0x8000 /* Ready bit in BD */
-
-struct spi_pram {
- unsigned short rbase; /* Rx BD Base Address */
- unsigned short tbase; /* Tx BD Base Address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
-};
-
-struct smc_uart_pram {
- unsigned short rbase; /* Rx BD Base Address */
- unsigned short tbase; /* Tx BD Base Address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned short max_idl; /* Maximum IDLE Characters */
- unsigned short idlc; /* Temporary IDLE Counter */
- unsigned short brkln; /* Last Rx Break Length */
- unsigned short brkec; /* Rx Break Condition Counter */
- unsigned short brkcr; /* Break Count Register (Tx) */
- unsigned short r_mask; /* Temporary bit mask */
-};
-
-struct smc_trnsp_pram {
- unsigned short rbase; /* rx BD Base Address */
- unsigned short tbase; /* Tx BD Base Address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned short reserved[5]; /* Reserved */
-};
-
-struct idma_pram {
- unsigned short ibase; /* IDMA BD Base Address */
- unsigned short ibptr; /* IDMA buffer descriptor pointer */
- unsigned long istate; /* IDMA internal state */
- unsigned long itemp; /* IDMA temp */
-};
-
-struct ethernet_pram {
- /*
- * SCC parameter RAM
- */
- unsigned short rbase; /* RX BD base address */
- unsigned short tbase; /* TX BD base address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned long rcrc; /* temp receive CRC */
- unsigned long tcrc; /* temp transmit CRC */
-
- /*
- * ETHERNET specific parameter RAM
- */
- unsigned long c_pres; /* preset CRC */
- unsigned long c_mask; /* constant mask for CRC */
- unsigned long crcec; /* CRC error counter */
- unsigned long alec; /* alighnment error counter */
- unsigned long disfc; /* discard frame counter */
- unsigned short pads; /* short frame PAD characters */
- unsigned short ret_lim; /* retry limit threshold */
- unsigned short ret_cnt; /* retry limit counter */
- unsigned short mflr; /* maximum frame length reg */
- unsigned short minflr; /* minimum frame length reg */
- unsigned short maxd1; /* maximum DMA1 length reg */
- unsigned short maxd2; /* maximum DMA2 length reg */
- unsigned short maxd; /* rx max DMA */
- unsigned short dma_cnt; /* rx dma counter */
- unsigned short max_b; /* max bd byte count */
- unsigned short gaddr1; /* group address filter 1 */
- unsigned short gaddr2; /* group address filter 2 */
- unsigned short gaddr3; /* group address filter 3 */
- unsigned short gaddr4; /* group address filter 4 */
- unsigned long tbuf0_data0; /* save area 0 - current frm */
- unsigned long tbuf0_data1; /* save area 1 - current frm */
- unsigned long tbuf0_rba0;
- unsigned long tbuf0_crc;
- unsigned short tbuf0_bcnt;
- union {
- unsigned char b[6];
- struct {
- unsigned short high;
- unsigned short middl;
- unsigned short low;
- } w;
- } paddr;
- unsigned short p_per; /* persistence */
- unsigned short rfbd_ptr; /* rx first bd pointer */
- unsigned short tfbd_ptr; /* tx first bd pointer */
- unsigned short tlbd_ptr; /* tx last bd pointer */
- unsigned long tbuf1_data0; /* save area 0 - next frame */
- unsigned long tbuf1_data1; /* save area 1 - next frame */
- unsigned long tbuf1_rba0;
- unsigned long tbuf1_crc;
- unsigned short tbuf1_bcnt;
- unsigned short tx_len; /* tx frame length counter */
- unsigned short iaddr1; /* individual address filter 1*/
- unsigned short iaddr2; /* individual address filter 2*/
- unsigned short iaddr3; /* individual address filter 3*/
- unsigned short iaddr4; /* individual address filter 4*/
- unsigned short boff_cnt; /* back-off counter */
- unsigned short taddr_h; /* temp address (MSB) */
- unsigned short taddr_m; /* temp address */
- unsigned short taddr_l; /* temp address (LSB) */
-};
-
-struct transparent_pram {
- /*
- * SCC parameter RAM
- */
- unsigned short rbase; /* RX BD base address */
- unsigned short tbase; /* TX BD base address */
- unsigned char rfcr; /* Rx function code */
- unsigned char tfcr; /* Tx function code */
- unsigned short mrblr; /* Rx buffer length */
- unsigned long rstate; /* Rx internal state */
- unsigned long rptr; /* Rx internal data pointer */
- unsigned short rbptr; /* rb BD Pointer */
- unsigned short rcount; /* Rx internal byte count */
- unsigned long rtemp; /* Rx temp */
- unsigned long tstate; /* Tx internal state */
- unsigned long tptr; /* Tx internal data pointer */
- unsigned short tbptr; /* Tx BD pointer */
- unsigned short tcount; /* Tx byte count */
- unsigned long ttemp; /* Tx temp */
- unsigned long rcrc; /* temp receive CRC */
- unsigned long tcrc; /* temp transmit CRC */
-
- /*
- * TRANSPARENT specific parameter RAM
- */
- unsigned long crc_p; /* CRC Preset */
- unsigned long crc_c; /* CRC constant */
-};
-
-struct timer_pram {
- /*
- * RISC timers parameter RAM
- */
- unsigned short tm_base; /* RISC timer table base adr */
- unsigned short tm_ptr; /* RISC timer table pointer */
- unsigned short r_tmr; /* RISC timer mode register */
- unsigned short r_tmv; /* RISC timer valid register */
- unsigned long tm_cmd; /* RISC timer cmd register */
- unsigned long tm_cnt; /* RISC timer internal cnt */
-};
-
-#endif
+++ /dev/null
-/***********************************
- * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of QUICC memory structures
- ***************************************
- */
-
-#ifndef __M68360_QUICC_H
-#define __M68360_QUICC_H
-
-/*
- * include registers and
- * parameter ram definitions files
- */
-#include <asm/m68360_regs.h>
-#include <asm/m68360_pram.h>
-
-
-
-/* Buffer Descriptors */
-typedef struct quicc_bd {
- volatile unsigned short status;
- volatile unsigned short length;
- volatile unsigned char *buf; /* WARNING: This is only true if *char is 32 bits */
-} QUICC_BD;
-
-
-#ifdef MOTOROLA_ORIGINAL
-struct user_data {
- /* BASE + 0x000: user data memory */
- volatile unsigned char udata_bd_ucode[0x400]; /*user data bd's Ucode*/
- volatile unsigned char udata_bd[0x200]; /*user data Ucode */
- volatile unsigned char ucode_ext[0x100]; /*Ucode Extention ram */
- volatile unsigned char RESERVED1[0x500]; /* Reserved area */
-};
-#else
-struct user_data {
- /* BASE + 0x000: user data memory */
- volatile unsigned char udata_bd_ucode[0x400]; /* user data, bds, Ucode*/
- volatile unsigned char udata_bd1[0x200]; /* user, bds */
- volatile unsigned char ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */
- volatile unsigned char udata_bd2[0x100]; /* user, bds */
- volatile unsigned char RESERVED1[0x400]; /* Reserved area */
-};
-#endif
-
-
-/*
- * internal ram
- */
-typedef struct quicc {
- union {
- struct quicc32_pram ch_pram_tbl[32]; /* 32*64(bytes) per channel */
- struct user_data u;
- }ch_or_u; /* multipul or user space */
-
- /* BASE + 0xc00: PARAMETER RAM */
- union {
- struct scc_pram {
- union {
- struct hdlc_pram h;
- struct uart_pram u;
- struct bisync_pram b;
- struct transparent_pram t;
- unsigned char RESERVED66[0x70];
- } pscc; /* scc parameter area (protocol dependent) */
- union {
- struct {
- unsigned char RESERVED70[0x10];
- struct spi_pram spi;
- unsigned char RESERVED72[0x8];
- struct timer_pram timer;
- } timer_spi;
- struct {
- struct idma_pram idma;
- unsigned char RESERVED67[0x4];
- union {
- struct smc_uart_pram u;
- struct smc_trnsp_pram t;
- } psmc;
- } idma_smc;
- } pothers;
- } scc;
- struct ethernet_pram enet_scc;
- struct global_multi_pram m;
- unsigned char pr[0x100];
- } pram[4];
-
- /* reserved */
-
- /* BASE + 0x1000: INTERNAL REGISTERS */
- /* SIM */
- volatile unsigned long sim_mcr; /* module configuration reg */
- volatile unsigned short sim_simtr; /* module test register */
- volatile unsigned char RESERVED2[0x2]; /* Reserved area */
- volatile unsigned char sim_avr; /* auto vector reg */
- volatile unsigned char sim_rsr; /* reset status reg */
- volatile unsigned char RESERVED3[0x2]; /* Reserved area */
- volatile unsigned char sim_clkocr; /* CLCO control register */
- volatile unsigned char RESERVED62[0x3]; /* Reserved area */
- volatile unsigned short sim_pllcr; /* PLL control register */
- volatile unsigned char RESERVED63[0x2]; /* Reserved area */
- volatile unsigned short sim_cdvcr; /* Clock devider control register */
- volatile unsigned short sim_pepar; /* Port E pin assignment register */
- volatile unsigned char RESERVED64[0xa]; /* Reserved area */
- volatile unsigned char sim_sypcr; /* system protection control*/
- volatile unsigned char sim_swiv; /* software interrupt vector*/
- volatile unsigned char RESERVED6[0x2]; /* Reserved area */
- volatile unsigned short sim_picr; /* periodic interrupt control reg */
- volatile unsigned char RESERVED7[0x2]; /* Reserved area */
- volatile unsigned short sim_pitr; /* periodic interrupt timing reg */
- volatile unsigned char RESERVED8[0x3]; /* Reserved area */
- volatile unsigned char sim_swsr; /* software service */
- volatile unsigned long sim_bkar; /* breakpoint address register*/
- volatile unsigned long sim_bkcr; /* breakpoint control register*/
- volatile unsigned char RESERVED10[0x8]; /* Reserved area */
- /* MEMC */
- volatile unsigned long memc_gmr; /* Global memory register */
- volatile unsigned short memc_mstat; /* MEMC status register */
- volatile unsigned char RESERVED11[0xa]; /* Reserved area */
- volatile unsigned long memc_br0; /* base register 0 */
- volatile unsigned long memc_or0; /* option register 0 */
- volatile unsigned char RESERVED12[0x8]; /* Reserved area */
- volatile unsigned long memc_br1; /* base register 1 */
- volatile unsigned long memc_or1; /* option register 1 */
- volatile unsigned char RESERVED13[0x8]; /* Reserved area */
- volatile unsigned long memc_br2; /* base register 2 */
- volatile unsigned long memc_or2; /* option register 2 */
- volatile unsigned char RESERVED14[0x8]; /* Reserved area */
- volatile unsigned long memc_br3; /* base register 3 */
- volatile unsigned long memc_or3; /* option register 3 */
- volatile unsigned char RESERVED15[0x8]; /* Reserved area */
- volatile unsigned long memc_br4; /* base register 3 */
- volatile unsigned long memc_or4; /* option register 3 */
- volatile unsigned char RESERVED16[0x8]; /* Reserved area */
- volatile unsigned long memc_br5; /* base register 3 */
- volatile unsigned long memc_or5; /* option register 3 */
- volatile unsigned char RESERVED17[0x8]; /* Reserved area */
- volatile unsigned long memc_br6; /* base register 3 */
- volatile unsigned long memc_or6; /* option register 3 */
- volatile unsigned char RESERVED18[0x8]; /* Reserved area */
- volatile unsigned long memc_br7; /* base register 3 */
- volatile unsigned long memc_or7; /* option register 3 */
- volatile unsigned char RESERVED9[0x28]; /* Reserved area */
- /* TEST */
- volatile unsigned short test_tstmra; /* master shift a */
- volatile unsigned short test_tstmrb; /* master shift b */
- volatile unsigned short test_tstsc; /* shift count */
- volatile unsigned short test_tstrc; /* repetition counter */
- volatile unsigned short test_creg; /* control */
- volatile unsigned short test_dreg; /* destributed register */
- volatile unsigned char RESERVED58[0x404]; /* Reserved area */
- /* IDMA1 */
- volatile unsigned short idma_iccr; /* channel configuration reg*/
- volatile unsigned char RESERVED19[0x2]; /* Reserved area */
- volatile unsigned short idma1_cmr; /* dma mode reg */
- volatile unsigned char RESERVED68[0x2]; /* Reserved area */
- volatile unsigned long idma1_sapr; /* dma source addr ptr */
- volatile unsigned long idma1_dapr; /* dma destination addr ptr */
- volatile unsigned long idma1_bcr; /* dma byte count reg */
- volatile unsigned char idma1_fcr; /* function code reg */
- volatile unsigned char RESERVED20; /* Reserved area */
- volatile unsigned char idma1_cmar; /* channel mask reg */
- volatile unsigned char RESERVED21; /* Reserved area */
- volatile unsigned char idma1_csr; /* channel status reg */
- volatile unsigned char RESERVED22[0x3]; /* Reserved area */
- /* SDMA */
- volatile unsigned char sdma_sdsr; /* status reg */
- volatile unsigned char RESERVED23; /* Reserved area */
- volatile unsigned short sdma_sdcr; /* configuration reg */
- volatile unsigned long sdma_sdar; /* address reg */
- /* IDMA2 */
- volatile unsigned char RESERVED69[0x2]; /* Reserved area */
- volatile unsigned short idma2_cmr; /* dma mode reg */
- volatile unsigned long idma2_sapr; /* dma source addr ptr */
- volatile unsigned long idma2_dapr; /* dma destination addr ptr */
- volatile unsigned long idma2_bcr; /* dma byte count reg */
- volatile unsigned char idma2_fcr; /* function code reg */
- volatile unsigned char RESERVED24; /* Reserved area */
- volatile unsigned char idma2_cmar; /* channel mask reg */
- volatile unsigned char RESERVED25; /* Reserved area */
- volatile unsigned char idma2_csr; /* channel status reg */
- volatile unsigned char RESERVED26[0x7]; /* Reserved area */
- /* Interrupt Controller */
- volatile unsigned long intr_cicr; /* CP interrupt configuration reg*/
- volatile unsigned long intr_cipr; /* CP interrupt pending reg */
- volatile unsigned long intr_cimr; /* CP interrupt mask reg */
- volatile unsigned long intr_cisr; /* CP interrupt in service reg*/
- /* Parallel I/O */
- volatile unsigned short pio_padir; /* port A data direction reg */
- volatile unsigned short pio_papar; /* port A pin assignment reg */
- volatile unsigned short pio_paodr; /* port A open drain reg */
- volatile unsigned short pio_padat; /* port A data register */
- volatile unsigned char RESERVED28[0x8]; /* Reserved area */
- volatile unsigned short pio_pcdir; /* port C data direction reg*/
- volatile unsigned short pio_pcpar; /* port C pin assignment reg*/
- volatile unsigned short pio_pcso; /* port C special options */
- volatile unsigned short pio_pcdat; /* port C data register */
- volatile unsigned short pio_pcint; /* port C interrupt cntrl reg */
- volatile unsigned char RESERVED29[0x16]; /* Reserved area */
- /* Timer */
- volatile unsigned short timer_tgcr; /* timer global configuration reg */
- volatile unsigned char RESERVED30[0xe]; /* Reserved area */
- volatile unsigned short timer_tmr1; /* timer 1 mode reg */
- volatile unsigned short timer_tmr2; /* timer 2 mode reg */
- volatile unsigned short timer_trr1; /* timer 1 referance reg */
- volatile unsigned short timer_trr2; /* timer 2 referance reg */
- volatile unsigned short timer_tcr1; /* timer 1 capture reg */
- volatile unsigned short timer_tcr2; /* timer 2 capture reg */
- volatile unsigned short timer_tcn1; /* timer 1 counter reg */
- volatile unsigned short timer_tcn2; /* timer 2 counter reg */
- volatile unsigned short timer_tmr3; /* timer 3 mode reg */
- volatile unsigned short timer_tmr4; /* timer 4 mode reg */
- volatile unsigned short timer_trr3; /* timer 3 referance reg */
- volatile unsigned short timer_trr4; /* timer 4 referance reg */
- volatile unsigned short timer_tcr3; /* timer 3 capture reg */
- volatile unsigned short timer_tcr4; /* timer 4 capture reg */
- volatile unsigned short timer_tcn3; /* timer 3 counter reg */
- volatile unsigned short timer_tcn4; /* timer 4 counter reg */
- volatile unsigned short timer_ter1; /* timer 1 event reg */
- volatile unsigned short timer_ter2; /* timer 2 event reg */
- volatile unsigned short timer_ter3; /* timer 3 event reg */
- volatile unsigned short timer_ter4; /* timer 4 event reg */
- volatile unsigned char RESERVED34[0x8]; /* Reserved area */
- /* CP */
- volatile unsigned short cp_cr; /* command register */
- volatile unsigned char RESERVED35[0x2]; /* Reserved area */
- volatile unsigned short cp_rccr; /* main configuration reg */
- volatile unsigned char RESERVED37; /* Reserved area */
- volatile unsigned char cp_rmds; /* development support status reg */
- volatile unsigned long cp_rmdr; /* development support control reg */
- volatile unsigned short cp_rctr1; /* ram break register 1 */
- volatile unsigned short cp_rctr2; /* ram break register 2 */
- volatile unsigned short cp_rctr3; /* ram break register 3 */
- volatile unsigned short cp_rctr4; /* ram break register 4 */
- volatile unsigned char RESERVED59[0x2]; /* Reserved area */
- volatile unsigned short cp_rter; /* RISC timers event reg */
- volatile unsigned char RESERVED38[0x2]; /* Reserved area */
- volatile unsigned short cp_rtmr; /* RISC timers mask reg */
- volatile unsigned char RESERVED39[0x14]; /* Reserved area */
- /* BRG */
- union {
- volatile unsigned long l;
- struct {
- volatile unsigned short BRGC_RESERV:14;
- volatile unsigned short rst:1;
- volatile unsigned short en:1;
- volatile unsigned short extc:2;
- volatile unsigned short atb:1;
- volatile unsigned short cd:12;
- volatile unsigned short div16:1;
- } b;
- } brgc[4]; /* BRG1-BRG4 configuration regs*/
- /* SCC registers */
- struct scc_regs {
- union {
- struct {
- /* Low word. */
- volatile unsigned short GSMR_RESERV2:1;
- volatile unsigned short edge:2;
- volatile unsigned short tci:1;
- volatile unsigned short tsnc:2;
- volatile unsigned short rinv:1;
- volatile unsigned short tinv:1;
- volatile unsigned short tpl:3;
- volatile unsigned short tpp:2;
- volatile unsigned short tend:1;
- volatile unsigned short tdcr:2;
- volatile unsigned short rdcr:2;
- volatile unsigned short renc:3;
- volatile unsigned short tenc:3;
- volatile unsigned short diag:2;
- volatile unsigned short enr:1;
- volatile unsigned short ent:1;
- volatile unsigned short mode:4;
- /* High word. */
- volatile unsigned short GSMR_RESERV1:14;
- volatile unsigned short pri:1;
- volatile unsigned short gde:1;
- volatile unsigned short tcrc:2;
- volatile unsigned short revd:1;
- volatile unsigned short trx:1;
- volatile unsigned short ttx:1;
- volatile unsigned short cdp:1;
- volatile unsigned short ctsp:1;
- volatile unsigned short cds:1;
- volatile unsigned short ctss:1;
- volatile unsigned short tfl:1;
- volatile unsigned short rfw:1;
- volatile unsigned short txsy:1;
- volatile unsigned short synl:2;
- volatile unsigned short rtsm:1;
- volatile unsigned short rsyn:1;
- } b;
- struct {
- volatile unsigned long low;
- volatile unsigned long high;
- } w;
- } scc_gsmr; /* SCC general mode reg */
- volatile unsigned short scc_psmr; /* protocol specific mode reg */
- volatile unsigned char RESERVED42[0x2]; /* Reserved area */
- volatile unsigned short scc_todr; /* SCC transmit on demand */
- volatile unsigned short scc_dsr; /* SCC data sync reg */
- volatile unsigned short scc_scce; /* SCC event reg */
- volatile unsigned char RESERVED43[0x2];/* Reserved area */
- volatile unsigned short scc_sccm; /* SCC mask reg */
- volatile unsigned char RESERVED44[0x1];/* Reserved area */
- volatile unsigned char scc_sccs; /* SCC status reg */
- volatile unsigned char RESERVED45[0x8]; /* Reserved area */
- } scc_regs[4];
- /* SMC */
- struct smc_regs {
- volatile unsigned char RESERVED46[0x2]; /* Reserved area */
- volatile unsigned short smc_smcmr; /* SMC mode reg */
- volatile unsigned char RESERVED60[0x2]; /* Reserved area */
- volatile unsigned char smc_smce; /* SMC event reg */
- volatile unsigned char RESERVED47[0x3]; /* Reserved area */
- volatile unsigned char smc_smcm; /* SMC mask reg */
- volatile unsigned char RESERVED48[0x5]; /* Reserved area */
- } smc_regs[2];
- /* SPI */
- volatile unsigned short spi_spmode; /* SPI mode reg */
- volatile unsigned char RESERVED51[0x4]; /* Reserved area */
- volatile unsigned char spi_spie; /* SPI event reg */
- volatile unsigned char RESERVED52[0x3]; /* Reserved area */
- volatile unsigned char spi_spim; /* SPI mask reg */
- volatile unsigned char RESERVED53[0x2]; /* Reserved area */
- volatile unsigned char spi_spcom; /* SPI command reg */
- volatile unsigned char RESERVED54[0x4]; /* Reserved area */
- /* PIP */
- volatile unsigned short pip_pipc; /* pip configuration reg */
- volatile unsigned char RESERVED65[0x2]; /* Reserved area */
- volatile unsigned short pip_ptpr; /* pip timing parameters reg */
- volatile unsigned long pip_pbdir; /* port b data direction reg */
- volatile unsigned long pip_pbpar; /* port b pin assignment reg */
- volatile unsigned long pip_pbodr; /* port b open drain reg */
- volatile unsigned long pip_pbdat; /* port b data reg */
- volatile unsigned char RESERVED71[0x18]; /* Reserved area */
- /* Serial Interface */
- volatile unsigned long si_simode; /* SI mode register */
- volatile unsigned char si_sigmr; /* SI global mode register */
- volatile unsigned char RESERVED55; /* Reserved area */
- volatile unsigned char si_sistr; /* SI status register */
- volatile unsigned char si_sicmr; /* SI command register */
- volatile unsigned char RESERVED56[0x4]; /* Reserved area */
- volatile unsigned long si_sicr; /* SI clock routing */
- volatile unsigned long si_sirp; /* SI ram pointers */
- volatile unsigned char RESERVED57[0xc]; /* Reserved area */
- volatile unsigned short si_siram[0x80]; /* SI routing ram */
-} QUICC;
-
-#endif
-
-/*
- * Local variables:
- * c-indent-level: 4
- * c-basic-offset: 4
- * tab-width: 4
- * End:
- */
+++ /dev/null
-/***********************************
- * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of the QUICC registers
- ***************************************
- */
-
-#ifndef __REGISTERS_H
-#define __REGISTERS_H
-
-#define CLEAR_BIT(x, bit) x =bit
-
-/*****************************************************************
- Command Register
-*****************************************************************/
-
-/* bit fields within command register */
-#define SOFTWARE_RESET 0x8000
-#define CMD_OPCODE 0x0f00
-#define CMD_CHANNEL 0x00f0
-#define CMD_FLAG 0x0001
-
-/* general command opcodes */
-#define INIT_RXTX_PARAMS 0x0000
-#define INIT_RX_PARAMS 0x0100
-#define INIT_TX_PARAMS 0x0200
-#define ENTER_HUNT_MODE 0x0300
-#define STOP_TX 0x0400
-#define GR_STOP_TX 0x0500
-#define RESTART_TX 0x0600
-#define CLOSE_RX_BD 0x0700
-#define SET_ENET_GROUP 0x0800
-#define RESET_ENET_GROUP 0x0900
-
-/* quicc32 CP commands */
-#define STOP_TX_32 0x0e00 /*add chan# bits 2-6 */
-#define ENTER_HUNT_MODE_32 0x1e00
-
-/* quicc32 mask/event SCC register */
-#define GOV 0x01
-#define GUN 0x02
-#define GINT 0x04
-#define IQOV 0x08
-
-
-/* Timer commands */
-#define SET_TIMER 0x0800
-
-/* Multi channel Interrupt structure */
-#define INTR_VALID 0x8000 /* Valid interrupt entry */
-#define INTR_WRAP 0x4000 /* Wrap bit in the interrupt entry table */
-#define INTR_CH_NU 0x07c0 /* Channel Num in interrupt table */
-#define INTR_MASK_BITS 0x383f
-
-/*
- * General SCC mode register (GSMR)
- */
-
-#define MODE_HDLC 0x0
-#define MODE_APPLE_TALK 0x2
-#define MODE_SS7 0x3
-#define MODE_UART 0x4
-#define MODE_PROFIBUS 0x5
-#define MODE_ASYNC_HDLC 0x6
-#define MODE_V14 0x7
-#define MODE_BISYNC 0x8
-#define MODE_DDCMP 0x9
-#define MODE_MULTI_CHANNEL 0xa
-#define MODE_ETHERNET 0xc
-
-#define DIAG_NORMAL 0x0
-#define DIAG_LOCAL_LPB 0x1
-#define DIAG_AUTO_ECHO 0x2
-#define DIAG_LBP_ECHO 0x3
-
-/* For RENC and TENC fields in GSMR */
-#define ENC_NRZ 0x0
-#define ENC_NRZI 0x1
-#define ENC_FM0 0x2
-#define ENC_MANCH 0x4
-#define ENC_DIFF_MANC 0x6
-
-/* For TDCR and RDCR fields in GSMR */
-#define CLOCK_RATE_1 0x0
-#define CLOCK_RATE_8 0x1
-#define CLOCK_RATE_16 0x2
-#define CLOCK_RATE_32 0x3
-
-#define TPP_00 0x0
-#define TPP_10 0x1
-#define TPP_01 0x2
-#define TPP_11 0x3
-
-#define TPL_NO 0x0
-#define TPL_8 0x1
-#define TPL_16 0x2
-#define TPL_32 0x3
-#define TPL_48 0x4
-#define TPL_64 0x5
-#define TPL_128 0x6
-
-#define TSNC_INFINITE 0x0
-#define TSNC_14_65 0x1
-#define TSNC_4_15 0x2
-#define TSNC_3_1 0x3
-
-#define EDGE_BOTH 0x0
-#define EDGE_POS 0x1
-#define EDGE_NEG 0x2
-#define EDGE_NO 0x3
-
-#define SYNL_NO 0x0
-#define SYNL_4 0x1
-#define SYNL_8 0x2
-#define SYNL_16 0x3
-
-#define TCRC_CCITT16 0x0
-#define TCRC_CRC16 0x1
-#define TCRC_CCITT32 0x2
-
-
-/*****************************************************************
- TODR (Transmit on demand) Register
-*****************************************************************/
-#define TODR_TOD 0x8000 /* Transmit on demand */
-
-
-/*****************************************************************
- CICR register settings
-*****************************************************************/
-
-/* note that relative irq priorities of the SCCs can be reordered
- * if desired - see p. 7-377 of the MC68360UM */
-#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
-#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
-#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
-#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
-
-#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
-#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
-#define CICR_VBA_MASK ((uint)0x000000e0) /* Vector Base Address */
-#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
-
-
-/*****************************************************************
- Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379)
-*****************************************************************/
-
-#define INTR_PIO_PC0 0x80000000 /* parallel I/O C bit 0 */
-#define INTR_SCC1 0x40000000 /* SCC port 1 */
-#define INTR_SCC2 0x20000000 /* SCC port 2 */
-#define INTR_SCC3 0x10000000 /* SCC port 3 */
-#define INTR_SCC4 0x08000000 /* SCC port 4 */
-#define INTR_PIO_PC1 0x04000000 /* parallel i/o C bit 1 */
-#define INTR_TIMER1 0x02000000 /* timer 1 */
-#define INTR_PIO_PC2 0x01000000 /* parallel i/o C bit 2 */
-#define INTR_PIO_PC3 0x00800000 /* parallel i/o C bit 3 */
-#define INTR_SDMA_BERR 0x00400000 /* SDMA channel bus error */
-#define INTR_DMA1 0x00200000 /* idma 1 */
-#define INTR_DMA2 0x00100000 /* idma 2 */
-#define INTR_TIMER2 0x00040000 /* timer 2 */
-#define INTR_CP_TIMER 0x00020000 /* CP timer */
-#define INTR_PIP_STATUS 0x00010000 /* PIP status */
-#define INTR_PIO_PC4 0x00008000 /* parallel i/o C bit 4 */
-#define INTR_PIO_PC5 0x00004000 /* parallel i/o C bit 5 */
-#define INTR_TIMER3 0x00001000 /* timer 3 */
-#define INTR_PIO_PC6 0x00000800 /* parallel i/o C bit 6 */
-#define INTR_PIO_PC7 0x00000400 /* parallel i/o C bit 7 */
-#define INTR_PIO_PC8 0x00000200 /* parallel i/o C bit 8 */
-#define INTR_TIMER4 0x00000080 /* timer 4 */
-#define INTR_PIO_PC9 0x00000040 /* parallel i/o C bit 9 */
-#define INTR_SCP 0x00000020 /* SCP */
-#define INTR_SMC1 0x00000010 /* SMC 1 */
-#define INTR_SMC2 0x00000008 /* SMC 2 */
-#define INTR_PIO_PC10 0x00000004 /* parallel i/o C bit 10 */
-#define INTR_PIO_PC11 0x00000002 /* parallel i/o C bit 11 */
-#define INTR_ERR 0x00000001 /* error */
-
-
-/*****************************************************************
- CPM Interrupt vector encodings (MC68360UM p. 7-376)
-*****************************************************************/
-
-#define CPMVEC_NR 32
-#define CPMVEC_PIO_PC0 0x1f
-#define CPMVEC_SCC1 0x1e
-#define CPMVEC_SCC2 0x1d
-#define CPMVEC_SCC3 0x1c
-#define CPMVEC_SCC4 0x1b
-#define CPMVEC_PIO_PC1 0x1a
-#define CPMVEC_TIMER1 0x19
-#define CPMVEC_PIO_PC2 0x18
-#define CPMVEC_PIO_PC3 0x17
-#define CPMVEC_SDMA_CB_ERR 0x16
-#define CPMVEC_IDMA1 0x15
-#define CPMVEC_IDMA2 0x14
-#define CPMVEC_RESERVED3 0x13
-#define CPMVEC_TIMER2 0x12
-#define CPMVEC_RISCTIMER 0x11
-#define CPMVEC_RESERVED2 0x10
-#define CPMVEC_PIO_PC4 0x0f
-#define CPMVEC_PIO_PC5 0x0e
-#define CPMVEC_TIMER3 0x0c
-#define CPMVEC_PIO_PC6 0x0b
-#define CPMVEC_PIO_PC7 0x0a
-#define CPMVEC_PIO_PC8 0x09
-#define CPMVEC_RESERVED1 0x08
-#define CPMVEC_TIMER4 0x07
-#define CPMVEC_PIO_PC9 0x06
-#define CPMVEC_SPI 0x05
-#define CPMVEC_SMC1 0x04
-#define CPMVEC_SMC2 0x03
-#define CPMVEC_PIO_PC10 0x02
-#define CPMVEC_PIO_PC11 0x01
-#define CPMVEC_ERROR 0x00
-
-/* #define CPMVEC_PIO_PC0 ((ushort)0x1f) */
-/* #define CPMVEC_SCC1 ((ushort)0x1e) */
-/* #define CPMVEC_SCC2 ((ushort)0x1d) */
-/* #define CPMVEC_SCC3 ((ushort)0x1c) */
-/* #define CPMVEC_SCC4 ((ushort)0x1b) */
-/* #define CPMVEC_PIO_PC1 ((ushort)0x1a) */
-/* #define CPMVEC_TIMER1 ((ushort)0x19) */
-/* #define CPMVEC_PIO_PC2 ((ushort)0x18) */
-/* #define CPMVEC_PIO_PC3 ((ushort)0x17) */
-/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */
-/* #define CPMVEC_IDMA1 ((ushort)0x15) */
-/* #define CPMVEC_IDMA2 ((ushort)0x14) */
-/* #define CPMVEC_RESERVED3 ((ushort)0x13) */
-/* #define CPMVEC_TIMER2 ((ushort)0x12) */
-/* #define CPMVEC_RISCTIMER ((ushort)0x11) */
-/* #define CPMVEC_RESERVED2 ((ushort)0x10) */
-/* #define CPMVEC_PIO_PC4 ((ushort)0x0f) */
-/* #define CPMVEC_PIO_PC5 ((ushort)0x0e) */
-/* #define CPMVEC_TIMER3 ((ushort)0x0c) */
-/* #define CPMVEC_PIO_PC6 ((ushort)0x0b) */
-/* #define CPMVEC_PIO_PC7 ((ushort)0x0a) */
-/* #define CPMVEC_PIO_PC8 ((ushort)0x09) */
-/* #define CPMVEC_RESERVED1 ((ushort)0x08) */
-/* #define CPMVEC_TIMER4 ((ushort)0x07) */
-/* #define CPMVEC_PIO_PC9 ((ushort)0x06) */
-/* #define CPMVEC_SPI ((ushort)0x05) */
-/* #define CPMVEC_SMC1 ((ushort)0x04) */
-/* #define CPMVEC_SMC2 ((ushort)0x03) */
-/* #define CPMVEC_PIO_PC10 ((ushort)0x02) */
-/* #define CPMVEC_PIO_PC11 ((ushort)0x01) */
-/* #define CPMVEC_ERROR ((ushort)0x00) */
-
-
-/*****************************************************************
- * PIO control registers
- *****************************************************************/
-
-/* Port A - See 360UM p. 7-358
- *
- * Note that most of these pins have alternate functions
- */
-
-
-/* The macros are nice, but there are all sorts of references to 1-indexed
- * facilities on the 68360... */
-/* #define PA_RXD(n) ((ushort)(0x01<<(2*n))) */
-/* #define PA_TXD(n) ((ushort)(0x02<<(2*n))) */
-
-#define PA_RXD1 ((ushort)0x0001)
-#define PA_TXD1 ((ushort)0x0002)
-#define PA_RXD2 ((ushort)0x0004)
-#define PA_TXD2 ((ushort)0x0008)
-#define PA_RXD3 ((ushort)0x0010)
-#define PA_TXD3 ((ushort)0x0020)
-#define PA_RXD4 ((ushort)0x0040)
-#define PA_TXD4 ((ushort)0x0080)
-
-#define PA_CLK1 ((ushort)0x0100)
-#define PA_CLK2 ((ushort)0x0200)
-#define PA_CLK3 ((ushort)0x0400)
-#define PA_CLK4 ((ushort)0x0800)
-#define PA_CLK5 ((ushort)0x1000)
-#define PA_CLK6 ((ushort)0x2000)
-#define PA_CLK7 ((ushort)0x4000)
-#define PA_CLK8 ((ushort)0x8000)
-
-
-/* Port B - See 360UM p. 7-362
- */
-
-
-/* Port C - See 360UM p. 7-365
- */
-
-#define PC_RTS1 ((ushort)0x0001)
-#define PC_RTS2 ((ushort)0x0002)
-#define PC__RTS3 ((ushort)0x0004) /* !RTS3 */
-#define PC__RTS4 ((ushort)0x0008) /* !RTS4 */
-
-#define PC_CTS1 ((ushort)0x0010)
-#define PC_CD1 ((ushort)0x0020)
-#define PC_CTS2 ((ushort)0x0040)
-#define PC_CD2 ((ushort)0x0080)
-#define PC_CTS3 ((ushort)0x0100)
-#define PC_CD3 ((ushort)0x0200)
-#define PC_CTS4 ((ushort)0x0400)
-#define PC_CD4 ((ushort)0x0800)
-
-
-
-/*****************************************************************
- chip select option register
-*****************************************************************/
-#define DTACK 0xe000
-#define ADR_MASK 0x1ffc
-#define RDWR_MASK 0x0002
-#define FC_MASK 0x0001
-
-/*****************************************************************
- tbase and rbase registers
-*****************************************************************/
-#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \
- (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase))
-#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \
- (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase))
-#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
- (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr))
-#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
- (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr))
-#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \
- ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
-#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \
- ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
-#define INCREASE_TBD(bd,quicc,pram) { \
- if((bd)->status & T_W) \
- (bd) = TBD_ADDR(quicc,pram); \
- else \
- (bd)++; \
-}
-#define DECREASE_TBD(bd,quicc,pram) { \
- if ((bd) == TBD_ADDR(quicc, pram)) \
- while (!((bd)->status & T_W)) \
- (bd)++; \
- else \
- (bd)--; \
-}
-#define INCREASE_RBD(bd,quicc,pram) { \
- if((bd)->status & R_W) \
- (bd) = RBD_ADDR(quicc,pram); \
- else \
- (bd)++; \
-}
-#define DECREASE_RBD(bd,quicc,pram) { \
- if ((bd) == RBD_ADDR(quicc, pram)) \
- while (!((bd)->status & T_W)) \
- (bd)++; \
- else \
- (bd)--; \
-}
-
-/*****************************************************************
- Macros for Multi channel
-*****************************************************************/
-#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page])
-#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase)
-#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \
- (&(quicc->ch_or_u.ch_pram_tbl[channel])))
-#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
- (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase)))
-#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
- (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase)))
-#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
- (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr)))
-#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
- (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr)))
-#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
- CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \
- ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
-#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
- CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \
- ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
-
-#define INCREASE_TBD_32(bd,quicc,page,channel) { \
- if((bd)->status & T_W) \
- (bd) = TBD_32_ADDR(quicc,page,channel); \
- else \
- (bd)++; \
-}
-#define DECREASE_TBD_32(bd,quicc,page,channel) { \
- if ((bd) == TBD_32_ADDR(quicc, page,channel)) \
- while (!((bd)->status & T_W)) \
- (bd)++; \
- else \
- (bd)--; \
-}
-#define INCREASE_RBD_32(bd,quicc,page,channel) { \
- if((bd)->status & R_W) \
- (bd) = RBD_32_ADDR(quicc,page,channel); \
- else \
- (bd)++; \
-}
-#define DECREASE_RBD_32(bd,quicc,page,channel) { \
- if ((bd) == RBD_32_ADDR(quicc, page,channel)) \
- while (!((bd)->status & T_W)) \
- (bd)++; \
- else \
- (bd)--; \
-}
-
-#endif
+++ /dev/null
-#ifndef _M68KNOMMU_MACHDEP_H
-#define _M68KNOMMU_MACHDEP_H
-
-#include <linux/interrupt.h>
-
-/* Hardware clock functions */
-extern void hw_timer_init(void);
-extern unsigned long hw_timer_offset(void);
-
-extern irqreturn_t arch_timer_interrupt(int irq, void *dummy);
-
-/* Machine dependent time handling */
-extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour,
- int *min, int *sec);
-extern int (*mach_set_clock_mmss)(unsigned long);
-
-/* machine dependent power off functions */
-extern void (*mach_reset)( void );
-extern void (*mach_halt)( void );
-extern void (*mach_power_off)( void );
-
-extern void config_BSP(char *command, int len);
-
-extern void do_IRQ(int irq, struct pt_regs *fp);
-
-#endif /* _M68KNOMMU_MACHDEP_H */
+++ /dev/null
-#include <asm-m68k/math-emu.h>
+++ /dev/null
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _M68KNOMMU_MC146818RTC_H
-#define _M68KNOMMU_MC146818RTC_H
-
-/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
-
-#endif /* _M68KNOMMU_MC146818RTC_H */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfcache.h -- ColdFire CPU cache support code
- *
- * (C) Copyright 2004, Greg Ungerer <gerg@snapgear.com>
- */
-
-/****************************************************************************/
-#ifndef __M68KNOMMU_MCFCACHE_H
-#define __M68KNOMMU_MCFCACHE_H
-/****************************************************************************/
-
-
-/*
- * The different ColdFire families have different cache arrangments.
- * Everything from a small instruction only cache, to configurable
- * data and/or instruction cache, to unified instruction/data, to
- * harvard style separate instruction and data caches.
- */
-
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
-/*
- * Simple version 2 core cache. These have instruction cache only,
- * we just need to invalidate it and enable it.
- */
-.macro CACHE_ENABLE
- movel #0x01000000,%d0 /* invalidate cache cmd */
- movec %d0,%CACR /* do invalidate cache */
- movel #0x80000100,%d0 /* setup cache mask */
- movec %d0,%CACR /* enable cache */
-.endm
-#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
-
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
-/*
- * New version 2 cores have a configurable split cache arrangement.
- * For now I am just enabling instruction cache - but ultimately I
- * think a split instruction/data cache would be better.
- */
-.macro CACHE_ENABLE
- movel #0x01400000,%d0
- movec %d0,%CACR /* invalidate cache */
- nop
- movel #0x0000c000,%d0 /* set SDRAM cached only */
- movec %d0,%ACR0
- movel #0x00000000,%d0 /* no other regions cached */
- movec %d0,%ACR1
- movel #0x80400100,%d0 /* configure cache */
- movec %d0,%CACR /* enable cache */
- nop
-.endm
-#endif /* CONFIG_M523x || CONFIG_M527x */
-
-#if defined(CONFIG_M528x)
-.macro CACHE_ENABLE
- nop
- movel #0x01000000, %d0
- movec %d0, %CACR /* Invalidate cache */
- nop
- movel #0x0000c020, %d0 /* Set SDRAM cached only */
- movec %d0, %ACR0
- movel #0x00000000, %d0 /* No other regions cached */
- movec %d0, %ACR1
- movel #0x80000200, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
- nop
-.endm
-#endif /* CONFIG_M528x */
-
-#if defined(CONFIG_M5249) || defined(CONFIG_M5307)
-/*
- * The version 3 core cache. Oddly enough the version 2 core 5249
- * has the same SDRAM and cache setup as the version 3 cores.
- * This is a single unified instruction/data cache.
- */
-.macro CACHE_ENABLE
- movel #0x01000000,%d0 /* invalidate whole cache */
- movec %d0,%CACR
- nop
-#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3)
- movel #0x0000c000,%d0 /* set SDRAM cached (write-thru) */
-#else
- movel #0x0000c020,%d0 /* set SDRAM cached (copyback) */
-#endif
- movec %d0,%ACR0
- movel #0x00000000,%d0 /* no other regions cached */
- movec %d0,%ACR1
- movel #0xa0000200,%d0 /* enable cache */
- movec %d0,%CACR
- nop
-.endm
-#endif /* CONFIG_M5249 || CONFIG_M5307 */
-
-#if defined(CONFIG_M532x)
-.macro CACHE_ENABLE
- movel #0x01000000,%d0 /* invalidate cache cmd */
- movec %d0,%CACR /* do invalidate cache */
- nop
- movel #0x4001C000,%d0 /* set SDRAM cached (write-thru) */
- movec %d0,%ACR0
- movel #0x00000000,%d0 /* no other regions cached */
- movec %d0,%ACR1
- movel #0x80000200,%d0 /* setup cache mask */
- movec %d0,%CACR /* enable cache */
- nop
-.endm
-#endif /* CONFIG_M532x */
-
-#if defined(CONFIG_M5407)
-/*
- * Version 4 cores have a true harvard style separate instruction
- * and data cache. Invalidate and enable cache, also enable write
- * buffers and branch accelerator.
- */
-.macro CACHE_ENABLE
- movel #0x01040100,%d0 /* invalidate whole cache */
- movec %d0,%CACR
- nop
- movel #0x000fc000,%d0 /* set SDRAM cached only */
- movec %d0, %ACR0
- movel #0x00000000,%d0 /* no other regions cached */
- movec %d0, %ACR1
- movel #0x000fc000,%d0 /* set SDRAM cached only */
- movec %d0, %ACR2
- movel #0x00000000,%d0 /* no other regions cached */
- movec %d0, %ACR3
- movel #0xb6088400,%d0 /* enable caches */
- movec %d0,%CACR
- nop
-.endm
-#endif /* CONFIG_M5407 */
-
-#if defined(CONFIG_M520x)
-.macro CACHE_ENABLE
- move.l #0x01000000,%d0 /* invalidate whole cache */
- movec %d0,%CACR
- nop
- move.l #0x0000c000,%d0 /* set SDRAM cached (write-thru) */
- movec %d0,%ACR0
- move.l #0x00000000,%d0 /* no other regions cached */
- movec %d0,%ACR1
- move.l #0x80400000,%d0 /* enable 8K instruction cache */
- movec %d0,%CACR
- nop
-.endm
-#endif /* CONFIG_M520x */
-
-/****************************************************************************/
-#endif /* __M68KNOMMU_MCFCACHE_H */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfdma.h -- Coldfire internal DMA support defines.
- *
- * (C) Copyright 1999, Rob Scott (rscott@mtrob.ml.org)
- */
-
-/****************************************************************************/
-#ifndef mcfdma_h
-#define mcfdma_h
-/****************************************************************************/
-
-
-/*
- * Get address specific defines for this Coldfire member.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#define MCFDMA_BASE0 0x200 /* Base address of DMA 0 */
-#define MCFDMA_BASE1 0x240 /* Base address of DMA 1 */
-#elif defined(CONFIG_M5272)
-#define MCFDMA_BASE0 0x0e0 /* Base address of DMA 0 */
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-/* These are relative to the IPSBAR, not MBAR */
-#define MCFDMA_BASE0 0x100 /* Base address of DMA 0 */
-#define MCFDMA_BASE1 0x140 /* Base address of DMA 1 */
-#define MCFDMA_BASE2 0x180 /* Base address of DMA 2 */
-#define MCFDMA_BASE3 0x1C0 /* Base address of DMA 3 */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#define MCFDMA_BASE0 0x300 /* Base address of DMA 0 */
-#define MCFDMA_BASE1 0x340 /* Base address of DMA 1 */
-#define MCFDMA_BASE2 0x380 /* Base address of DMA 2 */
-#define MCFDMA_BASE3 0x3C0 /* Base address of DMA 3 */
-#endif
-
-
-#if !defined(CONFIG_M5272)
-
-/*
- * Define the DMA register set addresses.
- * Note: these are longword registers, use unsigned long as data type
- */
-#define MCFDMA_SAR 0x00 /* DMA source address (r/w) */
-#define MCFDMA_DAR 0x01 /* DMA destination adr (r/w) */
-/* these are word registers, use unsigned short data type */
-#define MCFDMA_DCR 0x04 /* DMA control reg (r/w) */
-#define MCFDMA_BCR 0x06 /* DMA byte count reg (r/w) */
-/* these are byte registers, use unsiged char data type */
-#define MCFDMA_DSR 0x10 /* DMA status reg (r/w) */
-#define MCFDMA_DIVR 0x14 /* DMA interrupt vec (r/w) */
-
-/*
- * Bit definitions for the DMA Control Register (DCR).
- */
-#define MCFDMA_DCR_INT 0x8000 /* Enable completion irq */
-#define MCFDMA_DCR_EEXT 0x4000 /* Enable external DMA req */
-#define MCFDMA_DCR_CS 0x2000 /* Enable cycle steal */
-#define MCFDMA_DCR_AA 0x1000 /* Enable auto alignment */
-#define MCFDMA_DCR_BWC_MASK 0x0E00 /* Bandwidth ctl mask */
-#define MCFDMA_DCR_BWC_512 0x0200 /* Bandwidth: 512 Bytes */
-#define MCFDMA_DCR_BWC_1024 0x0400 /* Bandwidth: 1024 Bytes */
-#define MCFDMA_DCR_BWC_2048 0x0600 /* Bandwidth: 2048 Bytes */
-#define MCFDMA_DCR_BWC_4096 0x0800 /* Bandwidth: 4096 Bytes */
-#define MCFDMA_DCR_BWC_8192 0x0a00 /* Bandwidth: 8192 Bytes */
-#define MCFDMA_DCR_BWC_16384 0x0c00 /* Bandwidth: 16384 Bytes */
-#define MCFDMA_DCR_BWC_32768 0x0e00 /* Bandwidth: 32768 Bytes */
-#define MCFDMA_DCR_SAA 0x0100 /* Single Address Access */
-#define MCFDMA_DCR_S_RW 0x0080 /* SAA read/write value */
-#define MCFDMA_DCR_SINC 0x0040 /* Source addr inc enable */
-#define MCFDMA_DCR_SSIZE_MASK 0x0030 /* Src xfer size */
-#define MCFDMA_DCR_SSIZE_LONG 0x0000 /* Src xfer size, 00 = longw */
-#define MCFDMA_DCR_SSIZE_BYTE 0x0010 /* Src xfer size, 01 = byte */
-#define MCFDMA_DCR_SSIZE_WORD 0x0020 /* Src xfer size, 10 = word */
-#define MCFDMA_DCR_SSIZE_LINE 0x0030 /* Src xfer size, 11 = line */
-#define MCFDMA_DCR_DINC 0x0008 /* Dest addr inc enable */
-#define MCFDMA_DCR_DSIZE_MASK 0x0006 /* Dest xfer size */
-#define MCFDMA_DCR_DSIZE_LONG 0x0000 /* Dest xfer size, 00 = long */
-#define MCFDMA_DCR_DSIZE_BYTE 0x0002 /* Dest xfer size, 01 = byte */
-#define MCFDMA_DCR_DSIZE_WORD 0x0004 /* Dest xfer size, 10 = word */
-#define MCFDMA_DCR_DSIZE_LINE 0x0006 /* Dest xfer size, 11 = line */
-#define MCFDMA_DCR_START 0x0001 /* Start transfer */
-
-/*
- * Bit definitions for the DMA Status Register (DSR).
- */
-#define MCFDMA_DSR_CE 0x40 /* Config error */
-#define MCFDMA_DSR_BES 0x20 /* Bus Error on source */
-#define MCFDMA_DSR_BED 0x10 /* Bus Error on dest */
-#define MCFDMA_DSR_REQ 0x04 /* Requests remaining */
-#define MCFDMA_DSR_BSY 0x02 /* Busy */
-#define MCFDMA_DSR_DONE 0x01 /* DMA transfer complete */
-
-#else /* This is an MCF5272 */
-
-#define MCFDMA_DMR 0x00 /* Mode Register (r/w) */
-#define MCFDMA_DIR 0x03 /* Interrupt trigger register (r/w) */
-#define MCFDMA_DSAR 0x03 /* Source Address register (r/w) */
-#define MCFDMA_DDAR 0x04 /* Destination Address register (r/w) */
-#define MCFDMA_DBCR 0x02 /* Byte Count Register (r/w) */
-
-/* Bit definitions for the DMA Mode Register (DMR) */
-#define MCFDMA_DMR_RESET 0x80000000L /* Reset bit */
-#define MCFDMA_DMR_EN 0x40000000L /* DMA enable */
-#define MCFDMA_DMR_RQM 0x000C0000L /* Request Mode Mask */
-#define MCFDMA_DMR_RQM_DUAL 0x000C0000L /* Dual address mode, the only valid mode */
-#define MCFDMA_DMR_DSTM 0x00002000L /* Destination addressing mask */
-#define MCFDMA_DMR_DSTM_SA 0x00000000L /* Destination uses static addressing */
-#define MCFDMA_DMR_DSTM_IA 0x00002000L /* Destination uses incremental addressing */
-#define MCFDMA_DMR_DSTT_UD 0x00000400L /* Destination is user data */
-#define MCFDMA_DMR_DSTT_UC 0x00000800L /* Destination is user code */
-#define MCFDMA_DMR_DSTT_SD 0x00001400L /* Destination is supervisor data */
-#define MCFDMA_DMR_DSTT_SC 0x00001800L /* Destination is supervisor code */
-#define MCFDMA_DMR_DSTS_OFF 0x8 /* offset to the destination size bits */
-#define MCFDMA_DMR_DSTS_LONG 0x00000000L /* Long destination size */
-#define MCFDMA_DMR_DSTS_BYTE 0x00000100L /* Byte destination size */
-#define MCFDMA_DMR_DSTS_WORD 0x00000200L /* Word destination size */
-#define MCFDMA_DMR_DSTS_LINE 0x00000300L /* Line destination size */
-#define MCFDMA_DMR_SRCM 0x00000020L /* Source addressing mask */
-#define MCFDMA_DMR_SRCM_SA 0x00000000L /* Source uses static addressing */
-#define MCFDMA_DMR_SRCM_IA 0x00000020L /* Source uses incremental addressing */
-#define MCFDMA_DMR_SRCT_UD 0x00000004L /* Source is user data */
-#define MCFDMA_DMR_SRCT_UC 0x00000008L /* Source is user code */
-#define MCFDMA_DMR_SRCT_SD 0x00000014L /* Source is supervisor data */
-#define MCFDMA_DMR_SRCT_SC 0x00000018L /* Source is supervisor code */
-#define MCFDMA_DMR_SRCS_OFF 0x0 /* Offset to the source size bits */
-#define MCFDMA_DMR_SRCS_LONG 0x00000000L /* Long source size */
-#define MCFDMA_DMR_SRCS_BYTE 0x00000001L /* Byte source size */
-#define MCFDMA_DMR_SRCS_WORD 0x00000002L /* Word source size */
-#define MCFDMA_DMR_SRCS_LINE 0x00000003L /* Line source size */
-
-/* Bit definitions for the DMA interrupt register (DIR) */
-#define MCFDMA_DIR_INVEN 0x1000 /* Invalid Combination interrupt enable */
-#define MCFDMA_DIR_ASCEN 0x0800 /* Address Sequence Complete (Completion) interrupt enable */
-#define MCFDMA_DIR_TEEN 0x0200 /* Transfer Error interrupt enable */
-#define MCFDMA_DIR_TCEN 0x0100 /* Transfer Complete (a bus transfer, that is) interrupt enable */
-#define MCFDMA_DIR_INV 0x0010 /* Invalid Combination */
-#define MCFDMA_DIR_ASC 0x0008 /* Address Sequence Complete (DMA Completion) */
-#define MCFDMA_DIR_TE 0x0002 /* Transfer Error */
-#define MCFDMA_DIR_TC 0x0001 /* Transfer Complete */
-
-#endif /* !defined(CONFIG_M5272) */
-
-/****************************************************************************/
-#endif /* mcfdma_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfmbus.h -- Coldfire MBUS support defines.
- *
- * (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de)
- */
-
-/****************************************************************************/
-
-
-#ifndef mcfmbus_h
-#define mcfmbus_h
-
-
-#define MCFMBUS_BASE 0x280
-#define MCFMBUS_IRQ_VECTOR 0x19
-#define MCFMBUS_IRQ 0x1
-#define MCFMBUS_CLK 0x3f
-#define MCFMBUS_IRQ_LEVEL 0x07 /*IRQ Level 1*/
-#define MCFMBUS_ADDRESS 0x01
-
-
-/*
-* Define the 5307 MBUS register set addresses
-*/
-
-#define MCFMBUS_MADR 0x00
-#define MCFMBUS_MFDR 0x04
-#define MCFMBUS_MBCR 0x08
-#define MCFMBUS_MBSR 0x0C
-#define MCFMBUS_MBDR 0x10
-
-
-#define MCFMBUS_MADR_ADDR(a) (((a)&0x7F)<<0x01) /*Slave Address*/
-
-#define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/
-
-/*
-* Define bit flags in Control Register
-*/
-
-#define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */
-#define MCFMBUS_MBCR_MIEN (0x40) /* M-Bus Interrupt Enable */
-#define MCFMBUS_MBCR_MSTA (0x20) /* Master/Slave Mode Select Bit */
-#define MCFMBUS_MBCR_MTX (0x10) /* Transmit/Rcv Mode Select Bit */
-#define MCFMBUS_MBCR_TXAK (0x08) /* Transmit Acknowledge Enable */
-#define MCFMBUS_MBCR_RSTA (0x04) /* Repeat Start */
-
-/*
-* Define bit flags in Status Register
-*/
-
-#define MCFMBUS_MBSR_MCF (0x80) /* Data Transfer Complete */
-#define MCFMBUS_MBSR_MAAS (0x40) /* Addressed as a Slave */
-#define MCFMBUS_MBSR_MBB (0x20) /* Bus Busy */
-#define MCFMBUS_MBSR_MAL (0x10) /* Arbitration Lost */
-#define MCFMBUS_MBSR_SRW (0x04) /* Slave Transmit */
-#define MCFMBUS_MBSR_MIF (0x02) /* M-Bus Interrupt */
-#define MCFMBUS_MBSR_RXAK (0x01) /* No Acknowledge Received */
-
-/*
-* Define bit flags in DATA I/O Register
-*/
-
-#define MCFMBUS_MBDR_READ (0x01) /* 1=read 0=write MBUS */
-
-#define MBUSIOCSCLOCK 1
-#define MBUSIOCGCLOCK 2
-#define MBUSIOCSADDR 3
-#define MBUSIOCGADDR 4
-#define MBUSIOCSSLADDR 5
-#define MBUSIOCGSLADDR 6
-#define MBUSIOCSSUBADDR 7
-#define MBUSIOCGSUBADDR 8
-
-#endif
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfne.h -- NE2000 in ColdFire eval boards.
- *
- * (C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo (www.lineo.com)
- * (C) Copyright 2001, SnapGear (www.snapgear.com)
- *
- * 19990409 David W. Miller Converted from m5206ne.h for 5307 eval board
- *
- * Hacked support for m5206e Cadre III evaluation board
- * Fred Stevens (fred.stevens@pemstar.com) 13 April 1999
- */
-
-/****************************************************************************/
-#ifndef mcfne_h
-#define mcfne_h
-/****************************************************************************/
-
-
-/*
- * Support for NE2000 clones devices in ColdFire based boards.
- * Not all boards address these parts the same way, some use a
- * direct addressing method, others use a side-band address space
- * to access odd address registers, some require byte swapping
- * others do not.
- */
-#define BSWAP(w) (((w) << 8) | ((w) >> 8))
-#define RSWAP(w) (w)
-
-
-/*
- * Define the basic hardware resources of NE2000 boards.
- */
-
-#if defined(CONFIG_ARN5206)
-#define NE2000_ADDR 0x40000300
-#define NE2000_ODDOFFSET 0x00010000
-#define NE2000_IRQ_VECTOR 0xf0
-#define NE2000_IRQ_PRIORITY 2
-#define NE2000_IRQ_LEVEL 4
-#define NE2000_BYTE volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5206eC3)
-#define NE2000_ADDR 0x40000300
-#define NE2000_ODDOFFSET 0x00010000
-#define NE2000_IRQ_VECTOR 0x1c
-#define NE2000_IRQ_PRIORITY 2
-#define NE2000_IRQ_LEVEL 4
-#define NE2000_BYTE volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
-#define NE2000_ADDR 0x30000300
-#define NE2000_IRQ_VECTOR 25
-#define NE2000_IRQ_PRIORITY 1
-#define NE2000_IRQ_LEVEL 3
-#define NE2000_BYTE volatile unsigned char
-#endif
-
-#if defined(CONFIG_M5307C3)
-#define NE2000_ADDR 0x40000300
-#define NE2000_ODDOFFSET 0x00010000
-#define NE2000_IRQ_VECTOR 0x1b
-#define NE2000_BYTE volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-#define NE2000_ADDR 0x30600300
-#define NE2000_ODDOFFSET 0x00008000
-#define NE2000_IRQ_VECTOR 67
-#undef BSWAP
-#define BSWAP(w) (w)
-#define NE2000_BYTE volatile unsigned short
-#undef RSWAP
-#define RSWAP(w) (((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_M5307) && defined(CONFIG_NETtel)
-#define NE2000_ADDR0 0x30600300
-#define NE2000_ADDR1 0x30800300
-#define NE2000_ODDOFFSET 0x00008000
-#define NE2000_IRQ_VECTOR0 27
-#define NE2000_IRQ_VECTOR1 29
-#undef BSWAP
-#define BSWAP(w) (w)
-#define NE2000_BYTE volatile unsigned short
-#undef RSWAP
-#define RSWAP(w) (((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
-#define NE2000_ADDR 0x30600300
-#define NE2000_ODDOFFSET 0x00008000
-#define NE2000_IRQ_VECTOR 27
-#undef BSWAP
-#define BSWAP(w) (w)
-#define NE2000_BYTE volatile unsigned short
-#undef RSWAP
-#define RSWAP(w) (((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_ARN5307)
-#define NE2000_ADDR 0xfe600300
-#define NE2000_ODDOFFSET 0x00010000
-#define NE2000_IRQ_VECTOR 0x1b
-#define NE2000_IRQ_PRIORITY 2
-#define NE2000_IRQ_LEVEL 3
-#define NE2000_BYTE volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5407C3)
-#define NE2000_ADDR 0x40000300
-#define NE2000_ODDOFFSET 0x00010000
-#define NE2000_IRQ_VECTOR 0x1b
-#define NE2000_BYTE volatile unsigned short
-#endif
-
-/****************************************************************************/
-
-/*
- * Side-band address space for odd address requires re-mapping
- * many of the standard ISA access functions.
- */
-#ifdef NE2000_ODDOFFSET
-
-#undef outb
-#undef outb_p
-#undef inb
-#undef inb_p
-#undef outsb
-#undef outsw
-#undef insb
-#undef insw
-
-#define outb ne2000_outb
-#define inb ne2000_inb
-#define outb_p ne2000_outb
-#define inb_p ne2000_inb
-#define outsb ne2000_outsb
-#define outsw ne2000_outsw
-#define insb ne2000_insb
-#define insw ne2000_insw
-
-
-#ifndef COLDFIRE_NE2000_FUNCS
-
-void ne2000_outb(unsigned int val, unsigned int addr);
-int ne2000_inb(unsigned int addr);
-void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len);
-void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len);
-void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len);
-void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
-
-#else
-
-/*
- * This macro converts a conventional register address into the
- * real memory pointer of the mapped NE2000 device.
- * On most NE2000 implementations on ColdFire boards the chip is
- * mapped in kinda funny, due to its ISA heritage.
- */
-#define NE2000_PTR(addr) ((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
-#define NE2000_DATA_PTR(addr) (addr)
-
-
-void ne2000_outb(unsigned int val, unsigned int addr)
-{
- NE2000_BYTE *rp;
-
- rp = (NE2000_BYTE *) NE2000_PTR(addr);
- *rp = RSWAP(val);
-}
-
-int ne2000_inb(unsigned int addr)
-{
- NE2000_BYTE *rp, val;
-
- rp = (NE2000_BYTE *) NE2000_PTR(addr);
- val = *rp;
- return((int) ((NE2000_BYTE) RSWAP(val)));
-}
-
-void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len)
-{
- NE2000_BYTE *rp, val;
- unsigned char *buf;
-
- buf = (unsigned char *) vbuf;
- rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
- for (; (len > 0); len--) {
- val = *rp;
- *buf++ = RSWAP(val);
- }
-}
-
-void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len)
-{
- volatile unsigned short *rp;
- unsigned short w, *buf;
-
- buf = (unsigned short *) vbuf;
- rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
- for (; (len > 0); len--) {
- w = *rp;
- *buf++ = BSWAP(w);
- }
-}
-
-void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len)
-{
- NE2000_BYTE *rp, val;
- unsigned char *buf;
-
- buf = (unsigned char *) vbuf;
- rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
- for (; (len > 0); len--) {
- val = *buf++;
- *rp = RSWAP(val);
- }
-}
-
-void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
-{
- volatile unsigned short *rp;
- unsigned short w, *buf;
-
- buf = (unsigned short *) vbuf;
- rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
- for (; (len > 0); len--) {
- w = *buf++;
- *rp = BSWAP(w);
- }
-}
-
-#endif /* COLDFIRE_NE2000_FUNCS */
-#endif /* NE2000_OFFOFFSET */
-
-/****************************************************************************/
-
-#ifdef COLDFIRE_NE2000_FUNCS
-
-/*
- * Lastly the interrupt set up code...
- * Minor differences between the different board types.
- */
-
-#if defined(CONFIG_ARN5206)
-void ne2000_irqsetup(int irq)
-{
- volatile unsigned char *icrp;
-
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
- *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2;
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
-}
-#endif
-
-#if defined(CONFIG_M5206eC3)
-void ne2000_irqsetup(int irq)
-{
- volatile unsigned char *icrp;
-
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
- *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
-}
-#endif
-
-#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
-void ne2000_irqsetup(int irq)
-{
- mcf_autovector(irq);
-}
-#endif
-
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-void ne2000_irqsetup(int irq)
-{
- volatile unsigned long *icrp;
- volatile unsigned long *pitr;
-
- /* The NE2000 device uses external IRQ3 */
- icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
- *icrp = (*icrp & 0x77077777) | 0x00d00000;
-
- pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR);
- *pitr = *pitr | 0x20000000;
-}
-
-void ne2000_irqack(int irq)
-{
- volatile unsigned long *icrp;
-
- /* The NE2000 device uses external IRQ3 */
- icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
- *icrp = (*icrp & 0x77777777) | 0x00800000;
-}
-#endif
-
-#if defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-
-void ne2000_irqsetup(int irq)
-{
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
- mcf_autovector(irq);
-}
-
-#else
-
-void ne2000_irqsetup(int irq)
-{
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
-}
-
-#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */
-#endif /* CONFIG_M5307 || CONFIG_M5407 */
-
-#endif /* COLDFIRE_NE2000_FUNCS */
-
-/****************************************************************************/
-#endif /* mcfne_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfpci.h -- PCI bridge on ColdFire eval boards.
- *
- * (C) Copyright 2000, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef mcfpci_h
-#define mcfpci_h
-/****************************************************************************/
-
-
-#ifdef CONFIG_PCI
-
-/*
- * Address regions in the PCI address space are not mapped into the
- * normal memory space of the ColdFire. They must be accessed via
- * handler routines. This is easy for I/O space (inb/outb/etc) but
- * needs some code changes to support ordinary memory. Interrupts
- * also need to be vectored through the PCI handler first, then it
- * will call the actual driver sub-handlers.
- */
-
-/*
- * Un-define all the standard I/O access routines.
- */
-#undef inb
-#undef inw
-#undef inl
-#undef inb_p
-#undef inw_p
-#undef insb
-#undef insw
-#undef insl
-#undef outb
-#undef outw
-#undef outl
-#undef outb_p
-#undef outw_p
-#undef outsb
-#undef outsw
-#undef outsl
-
-#undef request_irq
-#undef free_irq
-
-#undef bus_to_virt
-#undef virt_to_bus
-
-
-/*
- * Re-direct all I/O memory accesses functions to PCI specific ones.
- */
-#define inb pci_inb
-#define inw pci_inw
-#define inl pci_inl
-#define inb_p pci_inb
-#define inw_p pci_inw
-#define insb pci_insb
-#define insw pci_insw
-#define insl pci_insl
-
-#define outb pci_outb
-#define outw pci_outw
-#define outl pci_outl
-#define outb_p pci_outb
-#define outw_p pci_outw
-#define outsb pci_outsb
-#define outsw pci_outsw
-#define outsl pci_outsl
-
-#define request_irq pci_request_irq
-#define free_irq pci_free_irq
-
-#define virt_to_bus pci_virt_to_bus
-#define bus_to_virt pci_bus_to_virt
-
-#define CONFIG_COMEMPCI 1
-
-
-/*
- * Prototypes of the real PCI functions (defined in bios32.c).
- */
-unsigned char pci_inb(unsigned int addr);
-unsigned short pci_inw(unsigned int addr);
-unsigned int pci_inl(unsigned int addr);
-void pci_insb(void *addr, void *buf, int len);
-void pci_insw(void *addr, void *buf, int len);
-void pci_insl(void *addr, void *buf, int len);
-
-void pci_outb(unsigned char val, unsigned int addr);
-void pci_outw(unsigned short val, unsigned int addr);
-void pci_outl(unsigned int val, unsigned int addr);
-void pci_outsb(void *addr, void *buf, int len);
-void pci_outsw(void *addr, void *buf, int len);
-void pci_outsl(void *addr, void *buf, int len);
-
-int pci_request_irq(unsigned int irq,
- void (*handler)(int, void *, struct pt_regs *),
- unsigned long flags,
- const char *device,
- void *dev_id);
-void pci_free_irq(unsigned int irq, void *dev_id);
-
-void *pci_bmalloc(int size);
-void pci_bmfree(void *bmp, int len);
-void pci_copytoshmem(unsigned long bmp, void *src, int size);
-void pci_copyfromshmem(void *dst, unsigned long bmp, int size);
-unsigned long pci_virt_to_bus(volatile void *address);
-void *pci_bus_to_virt(unsigned long address);
-void pci_bmcpyto(void *dst, void *src, int len);
-void pci_bmcpyfrom(void *dst, void *src, int len);
-
-#endif /* CONFIG_PCI */
-/****************************************************************************/
-#endif /* mcfpci_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfpit.h -- ColdFire internal PIT timer support defines.
- *
- * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef mcfpit_h
-#define mcfpit_h
-/****************************************************************************/
-
-
-/*
- * Get address specific defines for the 5270/5271, 5280/5282, and 5208.
- */
-#if defined(CONFIG_M520x)
-#define MCFPIT_BASE1 0x00080000 /* Base address of TIMER1 */
-#define MCFPIT_BASE2 0x00084000 /* Base address of TIMER2 */
-#else
-#define MCFPIT_BASE1 0x00150000 /* Base address of TIMER1 */
-#define MCFPIT_BASE2 0x00160000 /* Base address of TIMER2 */
-#define MCFPIT_BASE3 0x00170000 /* Base address of TIMER3 */
-#define MCFPIT_BASE4 0x00180000 /* Base address of TIMER4 */
-#endif
-
-/*
- * Define the PIT timer register set addresses.
- */
-#define MCFPIT_PCSR 0x0 /* PIT control register */
-#define MCFPIT_PMR 0x2 /* PIT modulus register */
-#define MCFPIT_PCNTR 0x4 /* PIT count register */
-
-/*
- * Bit definitions for the PIT Control and Status register.
- */
-#define MCFPIT_PCSR_CLK1 0x0000 /* System clock divisor */
-#define MCFPIT_PCSR_CLK2 0x0100 /* System clock divisor */
-#define MCFPIT_PCSR_CLK4 0x0200 /* System clock divisor */
-#define MCFPIT_PCSR_CLK8 0x0300 /* System clock divisor */
-#define MCFPIT_PCSR_CLK16 0x0400 /* System clock divisor */
-#define MCFPIT_PCSR_CLK32 0x0500 /* System clock divisor */
-#define MCFPIT_PCSR_CLK64 0x0600 /* System clock divisor */
-#define MCFPIT_PCSR_CLK128 0x0700 /* System clock divisor */
-#define MCFPIT_PCSR_CLK256 0x0800 /* System clock divisor */
-#define MCFPIT_PCSR_CLK512 0x0900 /* System clock divisor */
-#define MCFPIT_PCSR_CLK1024 0x0a00 /* System clock divisor */
-#define MCFPIT_PCSR_CLK2048 0x0b00 /* System clock divisor */
-#define MCFPIT_PCSR_CLK4096 0x0c00 /* System clock divisor */
-#define MCFPIT_PCSR_CLK8192 0x0d00 /* System clock divisor */
-#define MCFPIT_PCSR_CLK16384 0x0e00 /* System clock divisor */
-#define MCFPIT_PCSR_CLK32768 0x0f00 /* System clock divisor */
-#define MCFPIT_PCSR_DOZE 0x0040 /* Clock run in doze mode */
-#define MCFPIT_PCSR_HALTED 0x0020 /* Clock run in halt mode */
-#define MCFPIT_PCSR_OVW 0x0010 /* Overwrite PIT counter now */
-#define MCFPIT_PCSR_PIE 0x0008 /* Enable PIT interrupt */
-#define MCFPIT_PCSR_PIF 0x0004 /* PIT interrupt flag */
-#define MCFPIT_PCSR_RLD 0x0002 /* Reload counter */
-#define MCFPIT_PCSR_EN 0x0001 /* Enable PIT */
-#define MCFPIT_PCSR_DISABLE 0x0000 /* Disable PIT */
-
-/****************************************************************************/
-#endif /* mcfpit_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfsim.h -- ColdFire System Integration Module support.
- *
- * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef mcfsim_h
-#define mcfsim_h
-/****************************************************************************/
-
-
-/*
- * Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282,
- * 5307 or 5407 specific addresses.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#include <asm/m5206sim.h>
-#elif defined(CONFIG_M520x)
-#include <asm/m520xsim.h>
-#elif defined(CONFIG_M523x)
-#include <asm/m523xsim.h>
-#elif defined(CONFIG_M5249)
-#include <asm/m5249sim.h>
-#elif defined(CONFIG_M527x)
-#include <asm/m527xsim.h>
-#elif defined(CONFIG_M5272)
-#include <asm/m5272sim.h>
-#elif defined(CONFIG_M528x)
-#include <asm/m528xsim.h>
-#elif defined(CONFIG_M5307)
-#include <asm/m5307sim.h>
-#elif defined(CONFIG_M532x)
-#include <asm/m532xsim.h>
-#elif defined(CONFIG_M5407)
-#include <asm/m5407sim.h>
-#endif
-
-
-/*
- * Define the base address of the SIM within the MBAR address space.
- */
-#define MCFSIM_BASE 0x0 /* Base address of SIM */
-
-
-/*
- * Bit definitions for the ICR family of registers.
- */
-#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */
-#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */
-#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */
-#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */
-#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */
-#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */
-#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */
-#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */
-#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */
-
-#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */
-#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */
-#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */
-#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */
-
-/*
- * Bit definitions for the Interrupt Mask register (IMR).
- */
-#define MCFSIM_IMR_EINT1 0x0002 /* External intr # 1 */
-#define MCFSIM_IMR_EINT2 0x0004 /* External intr # 2 */
-#define MCFSIM_IMR_EINT3 0x0008 /* External intr # 3 */
-#define MCFSIM_IMR_EINT4 0x0010 /* External intr # 4 */
-#define MCFSIM_IMR_EINT5 0x0020 /* External intr # 5 */
-#define MCFSIM_IMR_EINT6 0x0040 /* External intr # 6 */
-#define MCFSIM_IMR_EINT7 0x0080 /* External intr # 7 */
-
-#define MCFSIM_IMR_SWD 0x0100 /* Software Watchdog intr */
-#define MCFSIM_IMR_TIMER1 0x0200 /* TIMER 1 intr */
-#define MCFSIM_IMR_TIMER2 0x0400 /* TIMER 2 intr */
-#define MCFSIM_IMR_MBUS 0x0800 /* MBUS intr */
-#define MCFSIM_IMR_UART1 0x1000 /* UART 1 intr */
-#define MCFSIM_IMR_UART2 0x2000 /* UART 2 intr */
-
-#if defined(CONFIG_M5206e)
-#define MCFSIM_IMR_DMA1 0x4000 /* DMA 1 intr */
-#define MCFSIM_IMR_DMA2 0x8000 /* DMA 2 intr */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307)
-#define MCFSIM_IMR_DMA0 0x4000 /* DMA 0 intr */
-#define MCFSIM_IMR_DMA1 0x8000 /* DMA 1 intr */
-#define MCFSIM_IMR_DMA2 0x10000 /* DMA 2 intr */
-#define MCFSIM_IMR_DMA3 0x20000 /* DMA 3 intr */
-#endif
-
-/*
- * Mask for all of the SIM devices. Some parts have more or less
- * SIM devices. This is a catchall for the sandard set.
- */
-#ifndef MCFSIM_IMR_MASKALL
-#define MCFSIM_IMR_MASKALL 0x3ffe /* All intr sources */
-#endif
-
-
-/*
- * PIT interrupt settings, if not found in mXXXXsim.h file.
- */
-#ifndef ICR_INTRCONF
-#define ICR_INTRCONF 0x2b /* PIT1 level 5, priority 3 */
-#endif
-#ifndef MCFPIT_IMR
-#define MCFPIT_IMR MCFINTC_IMRH
-#endif
-#ifndef MCFPIT_IMR_IBIT
-#define MCFPIT_IMR_IBIT (1 << (MCFINT_PIT1 - 32))
-#endif
-
-
-#ifndef __ASSEMBLY__
-/*
- * Definition for the interrupt auto-vectoring support.
- */
-extern void mcf_autovector(unsigned int vec);
-#endif /* __ASSEMBLY__ */
-
-/****************************************************************************/
-#endif /* mcfsim_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfsmc.h -- SMC ethernet support for ColdFire environments.
- *
- * (C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef mcfsmc_h
-#define mcfsmc_h
-/****************************************************************************/
-
-/*
- * None of the current ColdFire targets that use the SMC91x111
- * allow 8 bit accesses. So this code is 16bit access only.
- */
-
-
-#undef outb
-#undef inb
-#undef outw
-#undef outwd
-#undef inw
-#undef outl
-#undef inl
-
-#undef outsb
-#undef outsw
-#undef outsl
-#undef insb
-#undef insw
-#undef insl
-
-/*
- * Re-defines for ColdFire environment... The SMC part is
- * mapped into memory space, so remap the PC-style in/out
- * routines to handle that.
- */
-#define outb smc_outb
-#define inb smc_inb
-#define outw smc_outw
-#define outwd smc_outwd
-#define inw smc_inw
-#define outl smc_outl
-#define inl smc_inl
-
-#define outsb smc_outsb
-#define outsw smc_outsw
-#define outsl smc_outsl
-#define insb smc_insb
-#define insw smc_insw
-#define insl smc_insl
-
-
-static inline int smc_inb(unsigned int addr)
-{
- register unsigned short w;
- w = *((volatile unsigned short *) (addr & ~0x1));
- return(((addr & 0x1) ? w : (w >> 8)) & 0xff);
-}
-
-static inline void smc_outw(unsigned int val, unsigned int addr)
-{
- *((volatile unsigned short *) addr) = (val << 8) | (val >> 8);
-}
-
-static inline int smc_inw(unsigned int addr)
-{
- register unsigned short w;
- w = *((volatile unsigned short *) addr);
- return(((w << 8) | (w >> 8)) & 0xffff);
-}
-
-static inline void smc_outl(unsigned long val, unsigned int addr)
-{
- *((volatile unsigned long *) addr) =
- ((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) |
- ((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff);
-}
-
-static inline void smc_outwd(unsigned int val, unsigned int addr)
-{
- *((volatile unsigned short *) addr) = val;
-}
-
-
-/*
- * The rep* functions are used to feed the data port with
- * raw data. So we do not byte swap them when copying.
- */
-
-static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len)
-{
- volatile unsigned short *rp;
- unsigned short *buf, *ebuf;
-
- buf = (unsigned short *) vbuf;
- rp = (volatile unsigned short *) addr;
-
- /* Copy as words for as long as possible */
- for (ebuf = buf + (len >> 1); (buf < ebuf); )
- *buf++ = *rp;
-
- /* Lastly, handle left over byte */
- if (len & 0x1)
- *((unsigned char *) buf) = (*rp >> 8) & 0xff;
-}
-
-static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len)
-{
- volatile unsigned short *rp;
- unsigned short *buf, *ebuf;
-
- buf = (unsigned short *) vbuf;
- rp = (volatile unsigned short *) addr;
- for (ebuf = buf + len; (buf < ebuf); )
- *buf++ = *rp;
-}
-
-static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len)
-{
- volatile unsigned long *rp;
- unsigned long *buf, *ebuf;
-
- buf = (unsigned long *) vbuf;
- rp = (volatile unsigned long *) addr;
- for (ebuf = buf + len; (buf < ebuf); )
- *buf++ = *rp;
-}
-
-static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len)
-{
- volatile unsigned short *rp;
- unsigned short *buf, *ebuf;
-
- buf = (unsigned short *) vbuf;
- rp = (volatile unsigned short *) addr;
- for (ebuf = buf + len; (buf < ebuf); )
- *rp = *buf++;
-}
-
-static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len)
-{
- volatile unsigned long *rp;
- unsigned long *buf, *ebuf;
-
- buf = (unsigned long *) vbuf;
- rp = (volatile unsigned long *) addr;
- for (ebuf = buf + len; (buf < ebuf); )
- *rp = *buf++;
-}
-
-
-#ifdef CONFIG_NETtel
-/*
- * Re-map the address space of at least one of the SMC ethernet
- * parts. Both parts power up decoding the same address, so we
- * need to move one of them first, before doing enything else.
- *
- * We also increase the number of wait states for this part by one.
- */
-
-void smc_remap(unsigned int ioaddr)
-{
- static int once = 0;
- extern unsigned short ppdata;
- if (once++ == 0) {
- *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec;
- ppdata |= 0x0080;
- *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
- outw(0x0001, ioaddr + BANK_SELECT);
- outw(0x0001, ioaddr + BANK_SELECT);
- outw(0x0067, ioaddr + BASE);
-
- ppdata &= ~0x0080;
- *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
- }
-
- *((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180;
-}
-
-#endif
-
-/****************************************************************************/
-#endif /* mcfsmc_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcftimer.h -- ColdFire internal TIMER support defines.
- *
- * (C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com>
- * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef mcftimer_h
-#define mcftimer_h
-/****************************************************************************/
-
-
-/*
- * Get address specific defines for this ColdFire member.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */
-#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */
-#elif defined(CONFIG_M5272)
-#define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */
-#define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */
-#define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */
-#define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */
-#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */
-#elif defined(CONFIG_M532x)
-#define MCFTIMER_BASE1 0xfc070000 /* Base address of TIMER1 */
-#define MCFTIMER_BASE2 0xfc074000 /* Base address of TIMER2 */
-#define MCFTIMER_BASE3 0xfc078000 /* Base address of TIMER3 */
-#define MCFTIMER_BASE4 0xfc07c000 /* Base address of TIMER4 */
-#endif
-
-
-/*
- * Define the TIMER register set addresses.
- */
-#define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */
-#define MCFTIMER_TRR 0x04 /* Timer Reference (r/w) */
-#define MCFTIMER_TCR 0x08 /* Timer Capture reg (r/w) */
-#define MCFTIMER_TCN 0x0C /* Timer Counter reg (r/w) */
-#if defined(CONFIG_M532x)
-#define MCFTIMER_TER 0x03 /* Timer Event reg (r/w) */
-#else
-#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */
-#endif
-
-/*
- * Bit definitions for the Timer Mode Register (TMR).
- * Register bit flags are common accross ColdFires.
- */
-#define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */
-#define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */
-#define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */
-#define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */
-#define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */
-#define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */
-#define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */
-#define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */
-#define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */
-#define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */
-#define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */
-#define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */
-#define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */
-#define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */
-#define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */
-#define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */
-#define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */
-
-/*
- * Bit definitions for the Timer Event Registers (TER).
- */
-#define MCFTIMER_TER_CAP 0x01 /* Capture event */
-#define MCFTIMER_TER_REF 0x02 /* Refernece event */
-
-/****************************************************************************/
-#endif /* mcftimer_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfuart.h -- ColdFire internal UART support defines.
- *
- * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef mcfuart_h
-#define mcfuart_h
-/****************************************************************************/
-
-/*
- * Define the base address of the UARTS within the MBAR address
- * space.
- */
-#if defined(CONFIG_M5272)
-#define MCFUART_BASE1 0x100 /* Base address of UART1 */
-#define MCFUART_BASE2 0x140 /* Base address of UART2 */
-#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#if defined(CONFIG_NETtel)
-#define MCFUART_BASE1 0x180 /* Base address of UART1 */
-#define MCFUART_BASE2 0x140 /* Base address of UART2 */
-#else
-#define MCFUART_BASE1 0x140 /* Base address of UART1 */
-#define MCFUART_BASE2 0x180 /* Base address of UART2 */
-#endif
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-#define MCFUART_BASE1 0x200 /* Base address of UART1 */
-#define MCFUART_BASE2 0x240 /* Base address of UART2 */
-#define MCFUART_BASE3 0x280 /* Base address of UART3 */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-#define MCFUART_BASE1 0x200 /* Base address of UART1 */
-#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */
-#else
-#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
-#define MCFUART_BASE2 0x200 /* Base address of UART2 */
-#endif
-#elif defined(CONFIG_M520x)
-#define MCFUART_BASE1 0x60000 /* Base address of UART1 */
-#define MCFUART_BASE2 0x64000 /* Base address of UART2 */
-#define MCFUART_BASE3 0x68000 /* Base address of UART2 */
-#elif defined(CONFIG_M532x)
-#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */
-#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */
-#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */
-#endif
-
-
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-struct mcf_platform_uart {
- unsigned long mapbase; /* Physical address base */
- void __iomem *membase; /* Virtual address if mapped */
- unsigned int irq; /* Interrupt vector */
- unsigned int uartclk; /* UART clock rate */
-};
-
-/*
- * Define the ColdFire UART register set addresses.
- */
-#define MCFUART_UMR 0x00 /* Mode register (r/w) */
-#define MCFUART_USR 0x04 /* Status register (r) */
-#define MCFUART_UCSR 0x04 /* Clock Select (w) */
-#define MCFUART_UCR 0x08 /* Command register (w) */
-#define MCFUART_URB 0x0c /* Receiver Buffer (r) */
-#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */
-#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */
-#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */
-#define MCFUART_UISR 0x14 /* Interrupt Status (r) */
-#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */
-#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */
-#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */
-#ifdef CONFIG_M5272
-#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */
-#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */
-#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */
-#else
-#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */
-#endif
-#define MCFUART_UIPR 0x34 /* Input Port (r) */
-#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */
-#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */
-
-
-/*
- * Define bit flags in Mode Register 1 (MR1).
- */
-#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */
-#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */
-#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */
-#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */
-#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */
-
-#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */
-#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */
-#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */
-#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */
-#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */
-
-#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */
-#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */
-#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */
-#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */
-
-/*
- * Define bit flags in Mode Register 2 (MR2).
- */
-#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */
-#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */
-#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */
-#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */
-#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */
-
-#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */
-#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */
-#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */
-
-/*
- * Define bit flags in Status Register (USR).
- */
-#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */
-#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */
-#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */
-#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */
-#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */
-#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */
-#define MCFUART_USR_RXFULL 0x02 /* Receiver full */
-#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */
-
-#define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
- MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
-
-/*
- * Define bit flags in Clock Select Register (UCSR).
- */
-#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */
-#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */
-#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */
-
-#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */
-#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */
-#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */
-
-/*
- * Define bit flags in Command Register (UCR).
- */
-#define MCFUART_UCR_CMDNULL 0x00 /* No command */
-#define MCFUART_UCR_CMDRESETMRPTR 0x10 /* Reset MR pointer */
-#define MCFUART_UCR_CMDRESETRX 0x20 /* Reset receiver */
-#define MCFUART_UCR_CMDRESETTX 0x30 /* Reset transmitter */
-#define MCFUART_UCR_CMDRESETERR 0x40 /* Reset error status */
-#define MCFUART_UCR_CMDRESETBREAK 0x50 /* Reset BREAK change */
-#define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */
-#define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */
-
-#define MCFUART_UCR_TXNULL 0x00 /* No TX command */
-#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */
-#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */
-#define MCFUART_UCR_RXNULL 0x00 /* No RX command */
-#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */
-#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */
-
-/*
- * Define bit flags in Input Port Change Register (UIPCR).
- */
-#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */
-#define MCFUART_UIPCR_CTS 0x01 /* CTS value */
-
-/*
- * Define bit flags in Input Port Register (UIP).
- */
-#define MCFUART_UIPR_CTS 0x01 /* CTS value */
-
-/*
- * Define bit flags in Output Port Registers (UOP).
- * Clear bit by writing to UOP0, set by writing to UOP1.
- */
-#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */
-
-/*
- * Define bit flags in the Auxiliary Control Register (UACR).
- */
-#define MCFUART_UACR_IEC 0x01 /* Input enable control */
-
-/*
- * Define bit flags in Interrupt Status Register (UISR).
- * These same bits are used for the Interrupt Mask Register (UIMR).
- */
-#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */
-#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */
-#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */
-#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */
-
-#ifdef CONFIG_M5272
-/*
- * Define bit flags in the Transmitter FIFO Register (UTF).
- */
-#define MCFUART_UTF_TXB 0x1f /* Transmitter data level */
-#define MCFUART_UTF_FULL 0x20 /* Transmitter fifo full */
-#define MCFUART_UTF_TXS 0xc0 /* Transmitter status */
-
-/*
- * Define bit flags in the Receiver FIFO Register (URF).
- */
-#define MCFUART_URF_RXB 0x1f /* Receiver data level */
-#define MCFUART_URF_FULL 0x20 /* Receiver fifo full */
-#define MCFUART_URF_RXS 0xc0 /* Receiver status */
-#endif
-
-/****************************************************************************/
-#endif /* mcfuart_h */
+++ /dev/null
-/****************************************************************************/
-
-/*
- * mcfdebug.h -- ColdFire Debug Module support.
- *
- * (C) Copyright 2001, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef mcfdebug_h
-#define mcfdebug_h
-/****************************************************************************/
-
-/* Define the debug module registers */
-#define MCFDEBUG_CSR 0x0 /* Configuration status */
-#define MCFDEBUG_BAAR 0x5 /* BDM address attribute */
-#define MCFDEBUG_AATR 0x6 /* Address attribute trigger */
-#define MCFDEBUG_TDR 0x7 /* Trigger definition */
-#define MCFDEBUG_PBR 0x8 /* PC breakpoint */
-#define MCFDEBUG_PBMR 0x9 /* PC breakpoint mask */
-#define MCFDEBUG_ABHR 0xc /* High address breakpoint */
-#define MCFDEBUG_ABLR 0xd /* Low address breakpoint */
-#define MCFDEBUG_DBR 0xe /* Data breakpoint */
-#define MCFDEBUG_DBMR 0xf /* Data breakpoint mask */
-
-/* Define some handy constants for the trigger definition register */
-#define MCFDEBUG_TDR_TRC_DISP 0x00000000 /* display on DDATA only */
-#define MCFDEBUG_TDR_TRC_HALT 0x40000000 /* Processor halt on BP */
-#define MCFDEBUG_TDR_TRC_INTR 0x80000000 /* Debug intr on BP */
-#define MCFDEBUG_TDR_LXT1 0x00004000 /* TDR level 1 */
-#define MCFDEBUG_TDR_LXT2 0x00008000 /* TDR level 2 */
-#define MCFDEBUG_TDR_EBL1 0x00002000 /* Enable breakpoint level 1 */
-#define MCFDEBUG_TDR_EBL2 0x20000000 /* Enable breakpoint level 2 */
-#define MCFDEBUG_TDR_EDLW1 0x00001000 /* Enable data BP longword */
-#define MCFDEBUG_TDR_EDLW2 0x10000000
-#define MCFDEBUG_TDR_EDWL1 0x00000800 /* Enable data BP lower word */
-#define MCFDEBUG_TDR_EDWL2 0x08000000
-#define MCFDEBUG_TDR_EDWU1 0x00000400 /* Enable data BP upper word */
-#define MCFDEBUG_TDR_EDWU2 0x04000000
-#define MCFDEBUG_TDR_EDLL1 0x00000200 /* Enable data BP low low byte */
-#define MCFDEBUG_TDR_EDLL2 0x02000000
-#define MCFDEBUG_TDR_EDLM1 0x00000100 /* Enable data BP low mid byte */
-#define MCFDEBUG_TDR_EDLM2 0x01000000
-#define MCFDEBUG_TDR_EDUM1 0x00000080 /* Enable data BP up mid byte */
-#define MCFDEBUG_TDR_EDUM2 0x00800000
-#define MCFDEBUG_TDR_EDUU1 0x00000040 /* Enable data BP up up byte */
-#define MCFDEBUG_TDR_EDUU2 0x00400000
-#define MCFDEBUG_TDR_DI1 0x00000020 /* Data BP invert */
-#define MCFDEBUG_TDR_DI2 0x00200000
-#define MCFDEBUG_TDR_EAI1 0x00000010 /* Enable address BP inverted */
-#define MCFDEBUG_TDR_EAI2 0x00100000
-#define MCFDEBUG_TDR_EAR1 0x00000008 /* Enable address BP range */
-#define MCFDEBUG_TDR_EAR2 0x00080000
-#define MCFDEBUG_TDR_EAL1 0x00000004 /* Enable address BP low */
-#define MCFDEBUG_TDR_EAL2 0x00040000
-#define MCFDEBUG_TDR_EPC1 0x00000002 /* Enable PC BP */
-#define MCFDEBUG_TDR_EPC2 0x00020000
-#define MCFDEBUG_TDR_PCI1 0x00000001 /* PC BP invert */
-#define MCFDEBUG_TDR_PCI2 0x00010000
-
-/* Constants for the address attribute trigger register */
-#define MCFDEBUG_AAR_RESET 0x00000005
-/* Fields not yet implemented */
-
-/* And some definitions for the writable sections of the CSR */
-#define MCFDEBUG_CSR_RESET 0x00100000
-#define MCFDEBUG_CSR_PSTCLK 0x00020000 /* PSTCLK disable */
-#define MCFDEBUG_CSR_IPW 0x00010000 /* Inhibit processor writes */
-#define MCFDEBUG_CSR_MAP 0x00008000 /* Processor refs in emul mode */
-#define MCFDEBUG_CSR_TRC 0x00004000 /* Emul mode on trace exception */
-#define MCFDEBUG_CSR_EMU 0x00002000 /* Force emulation mode */
-#define MCFDEBUG_CSR_DDC_READ 0x00000800 /* Debug data control */
-#define MCFDEBUG_CSR_DDC_WRITE 0x00001000
-#define MCFDEBUG_CSR_UHE 0x00000400 /* User mode halt enable */
-#define MCFDEBUG_CSR_BTB0 0x00000000 /* Branch target 0 bytes */
-#define MCFDEBUG_CSR_BTB2 0x00000100 /* Branch target 2 bytes */
-#define MCFDEBUG_CSR_BTB3 0x00000200 /* Branch target 3 bytes */
-#define MCFDEBUG_CSR_BTB4 0x00000300 /* Branch target 4 bytes */
-#define MCFDEBUG_CSR_NPL 0x00000040 /* Non-pipelined mode */
-#define MCFDEBUG_CSR_SSM 0x00000010 /* Single step mode */
-
-/* Constants for the BDM address attribute register */
-#define MCFDEBUG_BAAR_RESET 0x00000005
-/* Fields not yet implemented */
-
-
-/* This routine wrappers up the wdebug asm instruction so that the register
- * and value can be relatively easily specified. The biggest hassle here is
- * that the debug module instructions (2 longs) must be long word aligned and
- * some pointer fiddling is performed to ensure this.
- */
-static inline void wdebug(int reg, unsigned long data) {
- unsigned short dbg_spc[6];
- unsigned short *dbg;
-
- // Force alignment to long word boundary
- dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc);
-
- // Build up the debug instruction
- dbg[0] = 0x2c80 | (reg & 0xf);
- dbg[1] = (data >> 16) & 0xffff;
- dbg[2] = data & 0xffff;
- dbg[3] = 0;
-
- // Perform the wdebug instruction
-#if 0
- // This strain is for gas which doesn't have the wdebug instructions defined
- asm( "move.l %0, %%a0\n\t"
- ".word 0xfbd0\n\t"
- ".word 0x0003\n\t"
- :: "g" (dbg) : "a0");
-#else
- // And this is for when it does
- asm( "wdebug (%0)" :: "a" (dbg));
-#endif
-}
-
-#endif
+++ /dev/null
-#include <asm-m68k/md.h>
+++ /dev/null
-#include <asm-m68k/mman.h>
+++ /dev/null
-#ifndef __M68KNOMMU_MMU_H
-#define __M68KNOMMU_MMU_H
-
-/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
-
-typedef struct {
- struct vm_list_struct *vmlist;
- unsigned long end_brk;
-} mm_context_t;
-
-#endif /* __M68KNOMMU_MMU_H */
+++ /dev/null
-#ifndef __M68KNOMMU_MMU_CONTEXT_H
-#define __M68KNOMMU_MMU_CONTEXT_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm-generic/mm_hooks.h>
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-static inline int
-init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
- // mm->context = virt_to_phys(mm->pgd);
- return(0);
-}
-
-#define destroy_context(mm) do { } while(0)
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
-{
-}
-
-#define deactivate_mm(tsk,mm) do { } while (0)
-
-static inline void activate_mm(struct mm_struct *prev_mm,
- struct mm_struct *next_mm)
-{
-}
-
-#endif
+++ /dev/null
-#ifndef ASM_M68KNOMMU_MODULE_H
-#define ASM_M68KNOMMU_MODULE_H
-
-struct mod_arch_specific {
-};
-
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-
-#endif /* ASM_M68KNOMMU_MODULE_H */
+++ /dev/null
-#include <asm-m68k/movs.h>
+++ /dev/null
-#include <asm-m68k/msgbuf.h>
+++ /dev/null
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
+++ /dev/null
-/****************************************************************************/
-
-/*
- * nettel.h -- Lineo (formerly Moreton Bay) NETtel support.
- *
- * (C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com)
- * (C) Copyright 2000-2001, Lineo Inc. (www.lineo.com)
- * (C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef nettel_h
-#define nettel_h
-/****************************************************************************/
-
-
-/****************************************************************************/
-#ifdef CONFIG_NETtel
-/****************************************************************************/
-
-#ifdef CONFIG_COLDFIRE
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#endif
-
-/*---------------------------------------------------------------------------*/
-#if defined(CONFIG_M5307)
-/*
- * NETtel/5307 based hardware first. DTR/DCD lines are wired to
- * GPIO lines. Most of the LED's are driver through a latch
- * connected to CS2.
- */
-#define MCFPP_DCD1 0x0001
-#define MCFPP_DCD0 0x0002
-#define MCFPP_DTR1 0x0004
-#define MCFPP_DTR0 0x0008
-
-#define NETtel_LEDADDR 0x30400000
-
-#ifndef __ASSEMBLY__
-
-extern volatile unsigned short ppdata;
-
-/*
- * These functions defined to give quasi generic access to the
- * PPIO bits used for DTR/DCD.
- */
-static __inline__ unsigned int mcf_getppdata(void)
-{
- volatile unsigned short *pp;
- pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
- return((unsigned int) *pp);
-}
-
-static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
-{
- volatile unsigned short *pp;
- pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
- ppdata = (ppdata & ~mask) | bits;
- *pp = ppdata;
-}
-#endif
-
-/*---------------------------------------------------------------------------*/
-#elif defined(CONFIG_M5206e)
-/*
- * NETtel/5206e based hardware has leds on latch on CS3.
- * No support modem for lines??
- */
-#define NETtel_LEDADDR 0x50000000
-
-/*---------------------------------------------------------------------------*/
-#elif defined(CONFIG_M5272)
-/*
- * NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines.
- */
-#define MCFPP_DCD0 0x0080
-#define MCFPP_DCD1 0x0000 /* Port 1 no DCD support */
-#define MCFPP_DTR0 0x0040
-#define MCFPP_DTR1 0x0000 /* Port 1 no DTR support */
-
-#ifndef __ASSEMBLY__
-/*
- * These functions defined to give quasi generic access to the
- * PPIO bits used for DTR/DCD.
- */
-static __inline__ unsigned int mcf_getppdata(void)
-{
- volatile unsigned short *pp;
- pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
- return((unsigned int) *pp);
-}
-
-static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
-{
- volatile unsigned short *pp;
- pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
- *pp = (*pp & ~mask) | bits;
-}
-#endif
-
-#endif
-/*---------------------------------------------------------------------------*/
-
-/****************************************************************************/
-#endif /* CONFIG_NETtel */
-/****************************************************************************/
-#endif /* nettel_h */
+++ /dev/null
-#include <asm-m68k/openprom.h>
+++ /dev/null
-#include <asm-m68k/oplib.h>
+++ /dev/null
-#ifndef _M68KNOMMU_PAGE_H
-#define _M68KNOMMU_PAGE_H
-
-/* PAGE_SHIFT determines the page size */
-
-#define PAGE_SHIFT (12)
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
-#define PAGE_MASK (~(PAGE_SIZE-1))
-
-#include <asm/setup.h>
-
-#ifndef __ASSEMBLY__
-
-#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr) free_page(addr)
-
-#define clear_page(page) memset((page), 0, PAGE_SIZE)
-#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
-
-#define clear_user_page(page, vaddr, pg) clear_page(page)
-#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
-
-#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
- alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
-#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd[16]; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct page *pgtable_t;
-
-#define pte_val(x) ((x).pte)
-#define pmd_val(x) ((&x)->pmd[0])
-#define pgd_val(x) ((x).pgd)
-#define pgprot_val(x) ((x).pgprot)
-
-#define __pte(x) ((pte_t) { (x) } )
-#define __pmd(x) ((pmd_t) { (x) } )
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x) ((pgprot_t) { (x) } )
-
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
-#endif /* !__ASSEMBLY__ */
-
-#include <asm/page_offset.h>
-
-#define PAGE_OFFSET (PAGE_OFFSET_RAW)
-
-#ifndef __ASSEMBLY__
-
-#define __pa(vaddr) virt_to_phys((void *)(vaddr))
-#define __va(paddr) phys_to_virt((unsigned long)(paddr))
-
-#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT)
-
-#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
-#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
-
-#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn))
-#define page_to_pfn(page) virt_to_pfn(page_to_virt(page))
-#define pfn_valid(pfn) ((pfn) < max_mapnr)
-
-#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
- ((void *)(kaddr) < (void *)memory_end))
-
-#endif /* __ASSEMBLY__ */
-
-#include <asm-generic/page.h>
-
-#endif /* _M68KNOMMU_PAGE_H */
+++ /dev/null
-
-
-/* This handles the memory map.. */
-#define PAGE_OFFSET_RAW CONFIG_RAMBASE
-
+++ /dev/null
-#ifndef _M68KNOMMU_PARAM_H
-#define _M68KNOMMU_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ CONFIG_HZ
-#define USER_HZ HZ
-#define CLOCKS_PER_SEC (USER_HZ)
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE 4096
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#endif /* _M68KNOMMU_PARAM_H */
+++ /dev/null
-#ifndef M68KNOMMU_PCI_H
-#define M68KNOMMU_PCI_H
-
-#include <asm-m68k/pci.h>
-
-#ifdef CONFIG_COMEMPCI
-/*
- * These are pretty much arbitary with the CoMEM implementation.
- * We have the whole address space to ourselves.
- */
-#define PCIBIOS_MIN_IO 0x100
-#define PCIBIOS_MIN_MEM 0x00010000
-
-#define pcibios_scan_all_fns(a, b) 0
-
-/*
- * Return whether the given PCI device DMA address mask can
- * be supported properly. For example, if your device can
- * only drive the low 24-bits during PCI bus mastering, then
- * you would pass 0x00ffffff as the mask to this function.
- */
-static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
-{
- return 1;
-}
-
-#endif /* CONFIG_COMEMPCI */
-
-#endif /* M68KNOMMU_PCI_H */
+++ /dev/null
-#ifndef __ARCH_M68KNOMMU_PERCPU__
-#define __ARCH_M68KNOMMU_PERCPU__
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_M68KNOMMU_PERCPU__ */
+++ /dev/null
-#ifndef _M68KNOMMU_PGALLOC_H
-#define _M68KNOMMU_PGALLOC_H
-
-#include <asm/setup.h>
-
-#define check_pgt_cache() do { } while (0)
-
-#endif /* _M68KNOMMU_PGALLOC_H */
+++ /dev/null
-#ifndef _M68KNOMMU_PGTABLE_H
-#define _M68KNOMMU_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-
-/*
- * (C) Copyright 2000-2002, Greg Ungerer <gerg@snapgear.com>
- */
-
-#include <linux/slab.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/io.h>
-
-/*
- * Trivial page table functions.
- */
-#define pgd_present(pgd) (1)
-#define pgd_none(pgd) (0)
-#define pgd_bad(pgd) (0)
-#define pgd_clear(pgdp)
-#define kern_addr_valid(addr) (1)
-#define pmd_offset(a, b) ((void *)0)
-
-#define PAGE_NONE __pgprot(0)
-#define PAGE_SHARED __pgprot(0)
-#define PAGE_COPY __pgprot(0)
-#define PAGE_READONLY __pgprot(0)
-#define PAGE_KERNEL __pgprot(0)
-
-extern void paging_init(void);
-#define swapper_pg_dir ((pgd_t *) 0)
-
-#define __swp_type(x) (0)
-#define __swp_offset(x) (0)
-#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
-
-static inline int pte_file(pte_t pte) { return 0; }
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr) (virt_to_page(0))
-
-/*
- * These would be in other places but having them here reduces the diffs.
- */
-extern unsigned int kobjsize(const void *objp);
-
-/*
- * No page table caches to initialise.
- */
-#define pgtable_cache_init() do { } while (0)
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-/*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
- */
-#define VMALLOC_START 0
-#define VMALLOC_END 0xffffffff
-
-#include <asm-generic/pgtable.h>
-
-#endif /* _M68KNOMMU_PGTABLE_H */
+++ /dev/null
-#include <asm-m68k/poll.h>
+++ /dev/null
-#include <asm-m68k/posix_types.h>
+++ /dev/null
-/*
- * include/asm-m68knommu/processor.h
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#ifndef __ASM_M68K_PROCESSOR_H
-#define __ASM_M68K_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <linux/compiler.h>
-#include <linux/threads.h>
-#include <asm/types.h>
-#include <asm/segment.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-#include <asm/current.h>
-
-static inline unsigned long rdusp(void)
-{
-#ifdef CONFIG_COLDFIRE
- extern unsigned int sw_usp;
- return(sw_usp);
-#else
- unsigned long usp;
- __asm__ __volatile__("move %/usp,%0" : "=a" (usp));
- return usp;
-#endif
-}
-
-static inline void wrusp(unsigned long usp)
-{
-#ifdef CONFIG_COLDFIRE
- extern unsigned int sw_usp;
- sw_usp = usp;
-#else
- __asm__ __volatile__("move %0,%/usp" : : "a" (usp));
-#endif
-}
-
-/*
- * User space process size: 3.75GB. This is hardcoded into a few places,
- * so don't change it unless you know what you are doing.
- */
-#define TASK_SIZE (0xF0000000UL)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's. We won't be using it
- */
-#define TASK_UNMAPPED_BASE 0
-
-/*
- * if you change this structure, you must change the code and offsets
- * in m68k/machasm.S
- */
-
-struct thread_struct {
- unsigned long ksp; /* kernel stack pointer */
- unsigned long usp; /* user stack pointer */
- unsigned short sr; /* saved status register */
- unsigned short fs; /* saved fs (sfc, dfc) */
- unsigned long crp[2]; /* cpu root pointer */
- unsigned long esp0; /* points to SR of stack frame */
- unsigned long fp[8*3];
- unsigned long fpcntl[3]; /* fp control regs */
- unsigned char fpstate[FPSTATESIZE]; /* floating point state */
-};
-
-#define INIT_THREAD { \
- sizeof(init_stack) + (unsigned long) init_stack, 0, \
- PS_S, __KERNEL_DS, \
- {0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \
-}
-
-/*
- * Coldfire stacks need to be re-aligned on trap exit, conventional
- * 68k can handle this case cleanly.
- */
-#if defined(CONFIG_COLDFIRE)
-#define reformat(_regs) do { (_regs)->format = 0x4; } while(0)
-#else
-#define reformat(_regs) do { } while (0)
-#endif
-
-/*
- * Do necessary setup to start up a newly executed thread.
- *
- * pass the data segment into user programs if it exists,
- * it can't hurt anything as far as I can tell
- */
-#define start_thread(_regs, _pc, _usp) \
-do { \
- set_fs(USER_DS); /* reads from user space */ \
- (_regs)->pc = (_pc); \
- ((struct switch_stack *)(_regs))[-1].a6 = 0; \
- reformat(_regs); \
- if (current->mm) \
- (_regs)->d5 = current->mm->start_data; \
- (_regs)->sr &= ~0x2000; \
- wrusp(_usp); \
-} while(0)
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk) do { } while (0)
-
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/*
- * Free current thread data structures etc..
- */
-static inline void exit_thread(void)
-{
-}
-
-unsigned long thread_saved_pc(struct task_struct *tsk);
-unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk) \
- ({ \
- unsigned long eip = 0; \
- if ((tsk)->thread.esp0 > PAGE_SIZE && \
- (virt_addr_valid((tsk)->thread.esp0))) \
- eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
- eip; })
-#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
-
-#define cpu_relax() barrier()
-
-#endif
+++ /dev/null
-#ifndef _M68K_PTRACE_H
-#define _M68K_PTRACE_H
-
-#define PT_D1 0
-#define PT_D2 1
-#define PT_D3 2
-#define PT_D4 3
-#define PT_D5 4
-#define PT_D6 5
-#define PT_D7 6
-#define PT_A0 7
-#define PT_A1 8
-#define PT_A2 9
-#define PT_A3 10
-#define PT_A4 11
-#define PT_A5 12
-#define PT_A6 13
-#define PT_D0 14
-#define PT_USP 15
-#define PT_ORIG_D0 16
-#define PT_SR 17
-#define PT_PC 18
-
-#ifndef __ASSEMBLY__
-
-/* this struct defines the way the registers are stored on the
- stack during a system call. */
-
-struct pt_regs {
- long d1;
- long d2;
- long d3;
- long d4;
- long d5;
- long a0;
- long a1;
- long a2;
- long d0;
- long orig_d0;
- long stkadj;
-#ifdef CONFIG_COLDFIRE
- unsigned format : 4; /* frame format specifier */
- unsigned vector : 12; /* vector offset */
- unsigned short sr;
- unsigned long pc;
-#else
- unsigned short sr;
- unsigned long pc;
- unsigned format : 4; /* frame format specifier */
- unsigned vector : 12; /* vector offset */
-#endif
-};
-
-/*
- * This is the extended stack used by signal handlers and the context
- * switcher: it's pushed after the normal "struct pt_regs".
- */
-struct switch_stack {
- unsigned long d6;
- unsigned long d7;
- unsigned long a3;
- unsigned long a4;
- unsigned long a5;
- unsigned long a6;
- unsigned long retpc;
-};
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS 12
-#define PTRACE_SETREGS 13
-#define PTRACE_GETFPREGS 14
-#define PTRACE_SETFPREGS 15
-
-#ifdef __KERNEL__
-
-#ifndef PS_S
-#define PS_S (0x2000)
-#define PS_M (0x1000)
-#endif
-
-#define user_mode(regs) (!((regs)->sr & PS_S))
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-extern void show_regs(struct pt_regs *);
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-#endif /* _M68K_PTRACE_H */
+++ /dev/null
-/***********************************
- * $Id: quicc_simple.h,v 1.1 2002/03/02 15:01:10 gerg Exp $
- ***********************************
- *
- ***************************************
- * Simple drivers common header
- ***************************************
- */
-
-#ifndef __SIMPLE_H
-#define __SIMPLE_H
-
-/* #include "quicc.h" */
-
-#define GLB_SCC_0 0
-#define GLB_SCC_1 1
-#define GLB_SCC_2 2
-#define GLB_SCC_3 3
-
-typedef void (int_routine)(unsigned short interrupt_event);
-typedef int_routine *int_routine_ptr;
-typedef void *(alloc_routine)(int length);
-typedef void (free_routine)(int scc_num, int channel_num, void *buf);
-typedef void (store_rx_buffer_routine)(int scc_num, int channel_num, void *buff, int length);
-typedef int (handle_tx_error_routine)(int scc_num, int channel_num, QUICC_BD *tbd);
-typedef void (handle_rx_error_routine)(int scc_num, int channel_num, QUICC_BD *rbd);
-typedef void (handle_lost_error_routine)(int scc_num, int channel_num);
-
-/* user defined functions for global errors */
-typedef void (handle_glob_overrun_routine)(int scc_number);
-typedef void (handle_glob_underrun_routine)(int scc_number);
-typedef void (glob_intr_q_overflow_routine)(int scc_number);
-
-/*
- * General initialization and command routines
- */
-void quicc_issue_cmd (unsigned short cmd, int scc_num);
-void quicc_init(void);
-void quicc_scc_init(int scc_number, int number_of_rx_buf, int number_of_tx_buf);
-void quicc_smc_init(int smc_number, int number_of_rx_buf, int number_of_tx_buf);
-void quicc_scc_start(int scc_num);
-void quicc_scc_loopback(int scc_num);
-
-/* Interrupt enable/disable routines for critical pieces of code*/
-unsigned short IntrDis(void);
-void IntrEna(unsigned short old_sr);
-
-/* For debugging */
-void print_rbd(int scc_num);
-void print_tbd(int scc_num);
-
-#endif
+++ /dev/null
-#include <asm-m68k/resource.h>
+++ /dev/null
-#include <asm-m68k/rtc.h>
+++ /dev/null
-#ifndef _M68KNOMMU_SCATTERLIST_H
-#define _M68KNOMMU_SCATTERLIST_H
-
-#include <linux/mm.h>
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset;
- dma_addr_t dma_address;
- unsigned int length;
-};
-
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
-
-#define ISA_DMA_THRESHOLD (0xffffffff)
-
-#endif /* !(_M68KNOMMU_SCATTERLIST_H) */
+++ /dev/null
-#ifndef _M68KNOMMU_SECTIONS_H
-#define _M68KNOMMU_SECTIONS_H
-
-/* nothing to see, move along */
-#include <asm-generic/sections.h>
-
-#endif
+++ /dev/null
-#ifndef _M68K_SEGMENT_H
-#define _M68K_SEGMENT_H
-
-/* define constants */
-/* Address spaces (FC0-FC2) */
-#define USER_DATA (1)
-#ifndef __USER_DS
-#define __USER_DS (USER_DATA)
-#endif
-#define USER_PROGRAM (2)
-#define SUPER_DATA (5)
-#ifndef __KERNEL_DS
-#define __KERNEL_DS (SUPER_DATA)
-#endif
-#define SUPER_PROGRAM (6)
-#define CPU_SPACE (7)
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
- unsigned long seg;
-} mm_segment_t;
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-#define USER_DS MAKE_MM_SEG(__USER_DS)
-#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS)
-
-/*
- * Get/set the SFC/DFC registers for MOVES instructions
- */
-
-static inline mm_segment_t get_fs(void)
-{
- return USER_DS;
-}
-
-static inline mm_segment_t get_ds(void)
-{
- /* return the supervisor data space code */
- return KERNEL_DS;
-}
-
-static inline void set_fs(mm_segment_t val)
-{
-}
-
-#define segment_eq(a,b) ((a).seg == (b).seg)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _M68K_SEGMENT_H */
+++ /dev/null
-#include <asm-m68k/sembuf.h>
+++ /dev/null
-#ifdef __KERNEL__
-
-#include <asm-m68k/setup.h>
-
-/* We have a bigger command line buffer. */
-#undef COMMAND_LINE_SIZE
-
-#endif /* __KERNEL__ */
-
-#define COMMAND_LINE_SIZE 512
+++ /dev/null
-#include <asm-m68k/shm.h>
+++ /dev/null
-#include <asm-m68k/shmbuf.h>
+++ /dev/null
-#include <asm-m68k/shmparam.h>
+++ /dev/null
-#ifndef _ASM_M68KNOMMU_SIGCONTEXT_H
-#define _ASM_M68KNOMMU_SIGCONTEXT_H
-
-struct sigcontext {
- unsigned long sc_mask; /* old sigmask */
- unsigned long sc_usp; /* old user stack pointer */
- unsigned long sc_d0;
- unsigned long sc_d1;
- unsigned long sc_a0;
- unsigned long sc_a1;
- unsigned long sc_a5;
- unsigned short sc_sr;
- unsigned long sc_pc;
- unsigned short sc_formatvec;
-};
-
-#endif
+++ /dev/null
-#ifndef _M68KNOMMU_SIGINFO_H
-#define _M68KNOMMU_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif
+++ /dev/null
-#ifndef _M68KNOMMU_SIGNAL_H
-#define _M68KNOMMU_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
- is taken to make libc match. */
-
-#define _NSIG 64
-#define _NSIG_BPW 32
-#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-#define NSIG 32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX _NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001
-#define SA_NOCLDWAIT 0x00000002
-#define SA_SIGINFO 0x00000004
-#define SA_ONSTACK 0x08000000
-#define SA_RESTART 0x10000000
-#define SA_NODEFER 0x40000000
-#define SA_RESETHAND 0x80000000
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
- __sighandler_t sa_handler;
- old_sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-struct sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
- sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
- struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-#define sa_handler _u._sa_handler
-#define sa_sigaction _u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
- void *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68KNOMMU_SIGNAL_H */
+++ /dev/null
-/* nothing required here yet */
+++ /dev/null
-#include <asm-m68k/socket.h>
+++ /dev/null
-#include <asm-m68k/sockios.h>
+++ /dev/null
-#include <asm-m68k/spinlock.h>
+++ /dev/null
-#include <asm-m68k/stat.h>
+++ /dev/null
-#include <asm-m68k/statfs.h>
+++ /dev/null
-#ifndef _M68KNOMMU_STRING_H_
-#define _M68KNOMMU_STRING_H_
-
-#ifdef __KERNEL__ /* only set these up for kernel code */
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#define __HAVE_ARCH_STRCPY
-static inline char * strcpy(char * dest,const char *src)
-{
- char *xdest = dest;
-
- __asm__ __volatile__
- ("1:\tmoveb %1@+,%0@+\n\t"
- "jne 1b"
- : "=a" (dest), "=a" (src)
- : "0" (dest), "1" (src) : "memory");
- return xdest;
-}
-
-#define __HAVE_ARCH_STRNCPY
-static inline char * strncpy(char *dest, const char *src, size_t n)
-{
- char *xdest = dest;
-
- if (n == 0)
- return xdest;
-
- __asm__ __volatile__
- ("1:\tmoveb %1@+,%0@+\n\t"
- "jeq 2f\n\t"
- "subql #1,%2\n\t"
- "jne 1b\n\t"
- "2:"
- : "=a" (dest), "=a" (src), "=d" (n)
- : "0" (dest), "1" (src), "2" (n)
- : "memory");
- return xdest;
-}
-
-
-#ifndef CONFIG_COLDFIRE
-
-#define __HAVE_ARCH_STRCMP
-static inline int strcmp(const char * cs,const char * ct)
-{
- char __res;
-
- __asm__
- ("1:\tmoveb %0@+,%2\n\t" /* get *cs */
- "cmpb %1@+,%2\n\t" /* compare a byte */
- "jne 2f\n\t" /* not equal, break out */
- "tstb %2\n\t" /* at end of cs? */
- "jne 1b\n\t" /* no, keep going */
- "jra 3f\n\t" /* strings are equal */
- "2:\tsubb %1@-,%2\n\t" /* *cs - *ct */
- "3:"
- : "=a" (cs), "=a" (ct), "=d" (__res)
- : "0" (cs), "1" (ct));
-
- return __res;
-}
-
-#define __HAVE_ARCH_STRNCMP
-static inline int strncmp(const char * cs,const char * ct,size_t count)
-{
- char __res;
-
- if (!count)
- return 0;
- __asm__
- ("1:\tmovb %0@+,%3\n\t" /* get *cs */
- "cmpb %1@+,%3\n\t" /* compare a byte */
- "jne 3f\n\t" /* not equal, break out */
- "tstb %3\n\t" /* at end of cs? */
- "jeq 4f\n\t" /* yes, all done */
- "subql #1,%2\n\t" /* no, adjust count */
- "jne 1b\n\t" /* more to do, keep going */
- "2:\tmoveq #0,%3\n\t" /* strings are equal */
- "jra 4f\n\t"
- "3:\tsubb %1@-,%3\n\t" /* *cs - *ct */
- "4:"
- : "=a" (cs), "=a" (ct), "=d" (count), "=d" (__res)
- : "0" (cs), "1" (ct), "2" (count));
- return __res;
-}
-
-#endif /* CONFIG_COLDFIRE */
-
-#define __HAVE_ARCH_MEMSET
-extern void * memset(void * s, int c, size_t count);
-
-#define __HAVE_ARCH_MEMCPY
-extern void * memcpy(void *d, const void *s, size_t count);
-
-#else /* KERNEL */
-
-/*
- * let user libraries deal with these,
- * IMHO the kernel has no place defining these functions for user apps
- */
-
-#define __HAVE_ARCH_STRCPY 1
-#define __HAVE_ARCH_STRNCPY 1
-#define __HAVE_ARCH_STRCAT 1
-#define __HAVE_ARCH_STRNCAT 1
-#define __HAVE_ARCH_STRCMP 1
-#define __HAVE_ARCH_STRNCMP 1
-#define __HAVE_ARCH_STRNICMP 1
-#define __HAVE_ARCH_STRCHR 1
-#define __HAVE_ARCH_STRRCHR 1
-#define __HAVE_ARCH_STRSTR 1
-#define __HAVE_ARCH_STRLEN 1
-#define __HAVE_ARCH_STRNLEN 1
-#define __HAVE_ARCH_MEMSET 1
-#define __HAVE_ARCH_MEMCPY 1
-#define __HAVE_ARCH_MEMMOVE 1
-#define __HAVE_ARCH_MEMSCAN 1
-#define __HAVE_ARCH_MEMCMP 1
-#define __HAVE_ARCH_MEMCHR 1
-#define __HAVE_ARCH_STRTOK 1
-
-#endif /* KERNEL */
-
-#endif /* _M68K_STRING_H_ */
+++ /dev/null
-#ifndef _M68KNOMMU_SYSTEM_H
-#define _M68KNOMMU_SYSTEM_H
-
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/entry.h>
-
-/*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing. This
- * also clears the TS-flag if the task we switched to has used the
- * math co-processor latest.
- */
-/*
- * switch_to() saves the extra registers, that are not saved
- * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
- * a0-a1. Some of these are used by schedule() and its predecessors
- * and so we might get see unexpected behaviors when a task returns
- * with unexpected register values.
- *
- * syscall stores these registers itself and none of them are used
- * by syscall after the function in the syscall has been called.
- *
- * Beware that resume now expects *next to be in d1 and the offset of
- * tss to be in a1. This saves a few instructions as we no longer have
- * to push them onto the stack and read them back right after.
- *
- * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
- *
- * Changed 96/09/19 by Andreas Schwab
- * pass prev in a0, next in a1, offset of tss in d1, and whether
- * the mm structures are shared in d2 (to avoid atc flushing).
- */
-asmlinkage void resume(void);
-#define switch_to(prev,next,last) \
-{ \
- void *_last; \
- __asm__ __volatile__( \
- "movel %1, %%a0\n\t" \
- "movel %2, %%a1\n\t" \
- "jbsr resume\n\t" \
- "movel %%d1, %0\n\t" \
- : "=d" (_last) \
- : "d" (prev), "d" (next) \
- : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1"); \
- (last) = _last; \
-}
-
-#ifdef CONFIG_COLDFIRE
-#define local_irq_enable() __asm__ __volatile__ ( \
- "move %/sr,%%d0\n\t" \
- "andi.l #0xf8ff,%%d0\n\t" \
- "move %%d0,%/sr\n" \
- : /* no outputs */ \
- : \
- : "cc", "%d0", "memory")
-#define local_irq_disable() __asm__ __volatile__ ( \
- "move %/sr,%%d0\n\t" \
- "ori.l #0x0700,%%d0\n\t" \
- "move %%d0,%/sr\n" \
- : /* no outputs */ \
- : \
- : "cc", "%d0", "memory")
-/* For spinlocks etc */
-#define local_irq_save(x) __asm__ __volatile__ ( \
- "movew %%sr,%0\n\t" \
- "movew #0x0700,%%d0\n\t" \
- "or.l %0,%%d0\n\t" \
- "movew %%d0,%/sr" \
- : "=d" (x) \
- : \
- : "cc", "%d0", "memory")
-#else
-
-/* portable version */ /* FIXME - see entry.h*/
-#define ALLOWINT 0xf8ff
-
-#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory")
-#define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory")
-#endif
-
-#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory")
-#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory")
-
-/* For spinlocks etc */
-#ifndef local_irq_save
-#define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0)
-#endif
-
-#define irqs_disabled() \
-({ \
- unsigned long flags; \
- local_save_flags(flags); \
- ((flags & 0x0700) == 0x0700); \
-})
-
-#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc")
-
-/*
- * Force strict CPU ordering.
- * Not really required on m68k...
- */
-#define nop() asm volatile ("nop"::)
-#define mb() asm volatile ("" : : :"memory")
-#define rmb() asm volatile ("" : : :"memory")
-#define wmb() asm volatile ("" : : :"memory")
-#define set_mb(var, value) ({ (var) = (value); wmb(); })
-
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-#define smp_read_barrier_depends() read_barrier_depends()
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while(0)
-#endif
-
-#define read_barrier_depends() ((void)0)
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-struct __xchg_dummy { unsigned long a[100]; };
-#define __xg(x) ((volatile struct __xchg_dummy *)(x))
-
-#ifndef CONFIG_RMW_INSNS
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
- unsigned long tmp, flags;
-
- local_irq_save(flags);
-
- switch (size) {
- case 1:
- __asm__ __volatile__
- ("moveb %2,%0\n\t"
- "moveb %1,%2"
- : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 2:
- __asm__ __volatile__
- ("movew %2,%0\n\t"
- "movew %1,%2"
- : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 4:
- __asm__ __volatile__
- ("movel %2,%0\n\t"
- "movel %1,%2"
- : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- }
- local_irq_restore(flags);
- return tmp;
-}
-#else
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
- switch (size) {
- case 1:
- __asm__ __volatile__
- ("moveb %2,%0\n\t"
- "1:\n\t"
- "casb %0,%1,%2\n\t"
- "jne 1b"
- : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 2:
- __asm__ __volatile__
- ("movew %2,%0\n\t"
- "1:\n\t"
- "casw %0,%1,%2\n\t"
- "jne 1b"
- : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 4:
- __asm__ __volatile__
- ("movel %2,%0\n\t"
- "1:\n\t"
- "casl %0,%1,%2\n\t"
- "jne 1b"
- : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
- break;
- }
- return x;
-}
-#endif
-
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
- (unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#ifndef CONFIG_SMP
-#include <asm-generic/cmpxchg.h>
-#endif
-
-#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \
- defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 )
-#define HARD_RESET_NOW() ({ \
- local_irq_disable(); \
- asm(" \
- moveal #0x10c00000, %a0; \
- moveb #0, 0xFFFFF300; \
- moveal 0(%a0), %sp; \
- moveal 4(%a0), %a0; \
- jmp (%a0); \
- "); \
-})
-#endif
-
-#ifdef CONFIG_COLDFIRE
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-/*
- * Need to account for broken early mask of 5272 silicon. So don't
- * jump through the original start address. Jump strait into the
- * known start of the FLASH code.
- */
-#define HARD_RESET_NOW() ({ \
- asm(" \
- movew #0x2700, %sr; \
- jmp 0xf0000400; \
- "); \
-})
-#elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
- defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
-#define HARD_RESET_NOW() ({ \
- asm(" \
- movew #0x2700, %sr; \
- moveal #0x10000044, %a0; \
- movel #0xffffffff, (%a0); \
- moveal #0x10000001, %a0; \
- moveb #0x00, (%a0); \
- moveal #0xf0000004, %a0; \
- moveal (%a0), %a0; \
- jmp (%a0); \
- "); \
-})
-#elif defined(CONFIG_M5272)
-/*
- * Retrieve the boot address in flash using CSBR0 and CSOR0
- * find the reset vector at flash_address + 4 (e.g. 0x400)
- * remap it in the flash's current location (e.g. 0xf0000400)
- * and jump there.
- */
-#define HARD_RESET_NOW() ({ \
- asm(" \
- movew #0x2700, %%sr; \
- move.l %0+0x40,%%d0; \
- and.l %0+0x44,%%d0; \
- andi.l #0xfffff000,%%d0; \
- mov.l %%d0,%%a0; \
- or.l 4(%%a0),%%d0; \
- mov.l %%d0,%%a0; \
- jmp (%%a0);" \
- : /* No output */ \
- : "o" (*(char *)MCF_MBAR) ); \
-})
-#elif defined(CONFIG_M528x)
-/*
- * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR),
- * that when set, resets the MCF528x.
- */
-#define HARD_RESET_NOW() \
-({ \
- unsigned char volatile *reset; \
- asm("move.w #0x2700, %sr"); \
- reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000)); \
- while(1) \
- *reset |= (0x01 << 7);\
-})
-#elif defined(CONFIG_M523x)
-#define HARD_RESET_NOW() ({ \
- asm(" \
- movew #0x2700, %sr; \
- movel #0x01000000, %sp; \
- moveal #0x40110000, %a0; \
- moveb #0x80, (%a0); \
- "); \
-})
-#elif defined(CONFIG_M520x)
- /*
- * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register
- * RCR), that when set, resets the MCF5208.
- */
-#define HARD_RESET_NOW() \
-({ \
- unsigned char volatile *reset; \
- asm("move.w #0x2700, %sr"); \
- reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000)); \
- while(1) \
- *reset |= 0x80; \
-})
-#else
-#define HARD_RESET_NOW() ({ \
- asm(" \
- movew #0x2700, %sr; \
- moveal #0x4, %a0; \
- moveal (%a0), %a0; \
- jmp (%a0); \
- "); \
-})
-#endif
-#endif
-#define arch_align_stack(x) (x)
-
-
-static inline int irqs_disabled_flags(unsigned long flags)
-{
- if (flags & 0x0700)
- return 0;
- else
- return 1;
-}
-
-#endif /* _M68KNOMMU_SYSTEM_H */
+++ /dev/null
-#include <asm-m68k/termbits.h>
+++ /dev/null
-#include <asm-m68k/termios.h>
+++ /dev/null
-/* thread_info.h: m68knommu low-level thread information
- * adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com)
- *
- * Copyright (C) 2002 David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#include <asm/page.h>
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-/*
- * Size of kernel stack for each process. This must be a power of 2...
- */
-#ifdef CONFIG_4KSTACKS
-#define THREAD_SIZE_ORDER (0)
-#else
-#define THREAD_SIZE_ORDER (1)
-#endif
-
-/*
- * for asm files, THREAD_SIZE is now generated by asm-offsets.c
- */
-#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
-
-/*
- * low level task data.
- */
-struct thread_info {
- struct task_struct *task; /* main task structure */
- struct exec_domain *exec_domain; /* execution domain */
- unsigned long flags; /* low level flags */
- int cpu; /* cpu we're on */
- int preempt_count; /* 0 => preemptable, <0 => BUG */
- struct restart_block restart_block;
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#define INIT_THREAD_INFO(tsk) \
-{ \
- .task = &tsk, \
- .exec_domain = &default_exec_domain, \
- .flags = 0, \
- .cpu = 0, \
- .restart_block = { \
- .fn = do_no_restart_syscall, \
- }, \
-}
-
-#define init_thread_info (init_thread_union.thread_info)
-#define init_stack (init_thread_union.stack)
-
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
- struct thread_info *ti;
- __asm__(
- "move.l %%sp, %0 \n\t"
- "and.l %1, %0"
- : "=&d"(ti)
- : "di" (~(THREAD_SIZE-1))
- );
- return ti;
-}
-
-#endif /* __ASSEMBLY__ */
-
-#define PREEMPT_ACTIVE 0x4000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_SIGPENDING 1 /* signal pending */
-#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
-#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling
- TIF_NEED_RESCHED */
-#define TIF_MEMDIE 4
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
-
-#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_THREAD_INFO_H */
+++ /dev/null
-/*
- * linux/include/asm-m68knommu/timex.h
- *
- * m68knommu architecture timex specifications
- */
-#ifndef _ASM_M68KNOMMU_TIMEX_H
-#define _ASM_M68KNOMMU_TIMEX_H
-
-#ifdef CONFIG_COLDFIRE
-#include <asm/coldfire.h>
-#define CLOCK_TICK_RATE MCF_CLK
-#else
-#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
-#endif
-
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles(void)
-{
- return 0;
-}
-
-#endif
+++ /dev/null
-#include <asm-m68k/tlb.h>
+++ /dev/null
-#ifndef _M68KNOMMU_TLBFLUSH_H
-#define _M68KNOMMU_TLBFLUSH_H
-
-/*
- * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
- * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
- */
-
-#include <asm/setup.h>
-
-/*
- * flush all user-space atc entries.
- */
-static inline void __flush_tlb(void)
-{
- BUG();
-}
-
-static inline void __flush_tlb_one(unsigned long addr)
-{
- BUG();
-}
-
-#define flush_tlb() __flush_tlb()
-
-/*
- * flush all atc entries (both kernel and user-space entries).
- */
-static inline void flush_tlb_all(void)
-{
- BUG();
-}
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
- BUG();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
-{
- BUG();
-}
-
-static inline void flush_tlb_range(struct mm_struct *mm,
- unsigned long start, unsigned long end)
-{
- BUG();
-}
-
-static inline void flush_tlb_kernel_page(unsigned long addr)
-{
- BUG();
-}
-
-#endif /* _M68KNOMMU_TLBFLUSH_H */
+++ /dev/null
-#ifndef _ASM_M68K_TOPOLOGY_H
-#define _ASM_M68K_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_M68K_TOPOLOGY_H */
+++ /dev/null
-/*
- * linux/include/asm/traps.h
- *
- * Copyright (C) 1993 Hamish Macdonald
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifndef _M68KNOMMU_TRAPS_H
-#define _M68KNOMMU_TRAPS_H
-
-#ifndef __ASSEMBLY__
-
-typedef void (*e_vector)(void);
-
-extern e_vector vectors[];
-extern void init_vectors(void);
-extern void enable_vector(unsigned int irq);
-extern void disable_vector(unsigned int irq);
-extern void ack_vector(unsigned int irq);
-
-#endif
-
-#define VEC_BUSERR (2)
-#define VEC_ADDRERR (3)
-#define VEC_ILLEGAL (4)
-#define VEC_ZERODIV (5)
-#define VEC_CHK (6)
-#define VEC_TRAP (7)
-#define VEC_PRIV (8)
-#define VEC_TRACE (9)
-#define VEC_LINE10 (10)
-#define VEC_LINE11 (11)
-#define VEC_RESV1 (12)
-#define VEC_COPROC (13)
-#define VEC_FORMAT (14)
-#define VEC_UNINT (15)
-#define VEC_SPUR (24)
-#define VEC_INT1 (25)
-#define VEC_INT2 (26)
-#define VEC_INT3 (27)
-#define VEC_INT4 (28)
-#define VEC_INT5 (29)
-#define VEC_INT6 (30)
-#define VEC_INT7 (31)
-#define VEC_SYS (32)
-#define VEC_TRAP1 (33)
-#define VEC_TRAP2 (34)
-#define VEC_TRAP3 (35)
-#define VEC_TRAP4 (36)
-#define VEC_TRAP5 (37)
-#define VEC_TRAP6 (38)
-#define VEC_TRAP7 (39)
-#define VEC_TRAP8 (40)
-#define VEC_TRAP9 (41)
-#define VEC_TRAP10 (42)
-#define VEC_TRAP11 (43)
-#define VEC_TRAP12 (44)
-#define VEC_TRAP13 (45)
-#define VEC_TRAP14 (46)
-#define VEC_TRAP15 (47)
-#define VEC_FPBRUC (48)
-#define VEC_FPIR (49)
-#define VEC_FPDIVZ (50)
-#define VEC_FPUNDER (51)
-#define VEC_FPOE (52)
-#define VEC_FPOVER (53)
-#define VEC_FPNAN (54)
-#define VEC_FPUNSUP (55)
-#define VEC_UNIMPEA (60)
-#define VEC_UNIMPII (61)
-#define VEC_USER (64)
-
-#define VECOFF(vec) ((vec)<<2)
-
-#ifndef __ASSEMBLY__
-
-/* Status register bits */
-#define PS_T (0x8000)
-#define PS_S (0x2000)
-#define PS_M (0x1000)
-#define PS_C (0x0001)
-
-/* structure for stack frames */
-
-struct frame {
- struct pt_regs ptregs;
- union {
- struct {
- unsigned long iaddr; /* instruction address */
- } fmt2;
- struct {
- unsigned long effaddr; /* effective address */
- } fmt3;
- struct {
- unsigned long effaddr; /* effective address */
- unsigned long pc; /* pc of faulted instr */
- } fmt4;
- struct {
- unsigned long effaddr; /* effective address */
- unsigned short ssw; /* special status word */
- unsigned short wb3s; /* write back 3 status */
- unsigned short wb2s; /* write back 2 status */
- unsigned short wb1s; /* write back 1 status */
- unsigned long faddr; /* fault address */
- unsigned long wb3a; /* write back 3 address */
- unsigned long wb3d; /* write back 3 data */
- unsigned long wb2a; /* write back 2 address */
- unsigned long wb2d; /* write back 2 data */
- unsigned long wb1a; /* write back 1 address */
- unsigned long wb1dpd0; /* write back 1 data/push data 0*/
- unsigned long pd1; /* push data 1*/
- unsigned long pd2; /* push data 2*/
- unsigned long pd3; /* push data 3*/
- } fmt7;
- struct {
- unsigned long iaddr; /* instruction address */
- unsigned short int1[4]; /* internal registers */
- } fmt9;
- struct {
- unsigned short int1;
- unsigned short ssw; /* special status word */
- unsigned short isc; /* instruction stage c */
- unsigned short isb; /* instruction stage b */
- unsigned long daddr; /* data cycle fault address */
- unsigned short int2[2];
- unsigned long dobuf; /* data cycle output buffer */
- unsigned short int3[2];
- } fmta;
- struct {
- unsigned short int1;
- unsigned short ssw; /* special status word */
- unsigned short isc; /* instruction stage c */
- unsigned short isb; /* instruction stage b */
- unsigned long daddr; /* data cycle fault address */
- unsigned short int2[2];
- unsigned long dobuf; /* data cycle output buffer */
- unsigned short int3[4];
- unsigned long baddr; /* stage B address */
- unsigned short int4[2];
- unsigned long dibuf; /* data cycle input buffer */
- unsigned short int5[3];
- unsigned ver : 4; /* stack frame version # */
- unsigned int6:12;
- unsigned short int7[18];
- } fmtb;
- } un;
-};
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _M68KNOMMU_TRAPS_H */
+++ /dev/null
-#include <asm-m68k/types.h>
+++ /dev/null
-#ifndef __M68KNOMMU_UACCESS_H
-#define __M68KNOMMU_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-
-#include <asm/segment.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-#define access_ok(type,addr,size) _access_ok((unsigned long)(addr),(size))
-
-/*
- * It is not enough to just have access_ok check for a real RAM address.
- * This would disallow the case of code/ro-data running XIP in flash/rom.
- * Ideally we would check the possible flash ranges too, but that is
- * currently not so easy.
- */
-static inline int _access_ok(unsigned long addr, unsigned long size)
-{
- return 1;
-}
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
- unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-
-/*
- * These are the main single-value transfer routines. They automatically
- * use the right size if we just have the right pointer type.
- */
-
-#define put_user(x, ptr) \
-({ \
- int __pu_err = 0; \
- typeof(*(ptr)) __pu_val = (x); \
- switch (sizeof (*(ptr))) { \
- case 1: \
- __put_user_asm(__pu_err, __pu_val, ptr, b); \
- break; \
- case 2: \
- __put_user_asm(__pu_err, __pu_val, ptr, w); \
- break; \
- case 4: \
- __put_user_asm(__pu_err, __pu_val, ptr, l); \
- break; \
- case 8: \
- memcpy(ptr, &__pu_val, sizeof (*(ptr))); \
- break; \
- default: \
- __pu_err = __put_user_bad(); \
- break; \
- } \
- __pu_err; \
-})
-#define __put_user(x, ptr) put_user(x, ptr)
-
-extern int __put_user_bad(void);
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-
-#define __ptr(x) ((unsigned long *)(x))
-
-#define __put_user_asm(err,x,ptr,bwl) \
- __asm__ ("move" #bwl " %0,%1" \
- : /* no outputs */ \
- :"d" (x),"m" (*__ptr(ptr)) : "memory")
-
-#define get_user(x, ptr) \
-({ \
- int __gu_err = 0; \
- typeof(x) __gu_val = 0; \
- switch (sizeof(*(ptr))) { \
- case 1: \
- __get_user_asm(__gu_err, __gu_val, ptr, b, "=d"); \
- break; \
- case 2: \
- __get_user_asm(__gu_err, __gu_val, ptr, w, "=r"); \
- break; \
- case 4: \
- __get_user_asm(__gu_err, __gu_val, ptr, l, "=r"); \
- break; \
- case 8: \
- memcpy((void *) &__gu_val, ptr, sizeof (*(ptr))); \
- break; \
- default: \
- __gu_val = 0; \
- __gu_err = __get_user_bad(); \
- break; \
- } \
- (x) = (typeof(*(ptr))) __gu_val; \
- __gu_err; \
-})
-#define __get_user(x, ptr) get_user(x, ptr)
-
-extern int __get_user_bad(void);
-
-#define __get_user_asm(err,x,ptr,bwl,reg) \
- __asm__ ("move" #bwl " %1,%0" \
- : "=d" (x) \
- : "m" (*__ptr(ptr)))
-
-#define copy_from_user(to, from, n) (memcpy(to, from, n), 0)
-#define copy_to_user(to, from, n) (memcpy(to, from, n), 0)
-
-#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
-#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; })
-
-#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; })
-
-/*
- * Copy a null terminated string from userspace.
- */
-
-static inline long
-strncpy_from_user(char *dst, const char *src, long count)
-{
- char *tmp;
- strncpy(dst, src, count);
- for (tmp = dst; *tmp && count > 0; tmp++, count--)
- ;
- return(tmp - dst); /* DAVIDM should we count a NUL ? check getname */
-}
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-static inline long strnlen_user(const char *src, long n)
-{
- return(strlen(src) + 1); /* DAVIDM make safer */
-}
-
-#define strlen_user(str) strnlen_user(str, 32767)
-
-/*
- * Zero Userspace
- */
-
-static inline unsigned long
-__clear_user(void *to, unsigned long n)
-{
- memset(to, 0, n);
- return 0;
-}
-
-#define clear_user(to,n) __clear_user(to,n)
-
-#endif /* _M68KNOMMU_UACCESS_H */
+++ /dev/null
-#ifndef _M68KNOMMU_UCONTEXT_H
-#define _M68KNOMMU_UCONTEXT_H
-
-typedef int greg_t;
-#define NGREG 18
-typedef greg_t gregset_t[NGREG];
-
-typedef struct fpregset {
- int f_pcr;
- int f_psr;
- int f_fpiaddr;
- int f_fpregs[8][3];
-} fpregset_t;
-
-struct mcontext {
- int version;
- gregset_t gregs;
- fpregset_t fpregs;
-};
-
-#define MCONTEXT_VERSION 2
-
-struct ucontext {
- unsigned long uc_flags;
- struct ucontext *uc_link;
- stack_t uc_stack;
- struct mcontext uc_mcontext;
- unsigned long uc_filler[80];
- sigset_t uc_sigmask; /* mask last for extensibility */
-};
-
-#endif
+++ /dev/null
-#ifndef _ASM_M68KNOMMU_UNALIGNED_H
-#define _ASM_M68KNOMMU_UNALIGNED_H
-
-
-#ifdef CONFIG_COLDFIRE
-#include <linux/unaligned/be_struct.h>
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned __get_unaligned_be
-#define put_unaligned __put_unaligned_be
-
-#else
-/*
- * The m68k can do unaligned accesses itself.
- */
-#include <linux/unaligned/access_ok.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned __get_unaligned_be
-#define put_unaligned __put_unaligned_be
-
-#endif
-
-#endif /* _ASM_M68KNOMMU_UNALIGNED_H */
+++ /dev/null
-#ifndef _ASM_M68K_UNISTD_H_
-#define _ASM_M68K_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall 0
-#define __NR_exit 1
-#define __NR_fork 2
-#define __NR_read 3
-#define __NR_write 4
-#define __NR_open 5
-#define __NR_close 6
-#define __NR_waitpid 7
-#define __NR_creat 8
-#define __NR_link 9
-#define __NR_unlink 10
-#define __NR_execve 11
-#define __NR_chdir 12
-#define __NR_time 13
-#define __NR_mknod 14
-#define __NR_chmod 15
-#define __NR_chown 16
-#define __NR_break 17
-#define __NR_oldstat 18
-#define __NR_lseek 19
-#define __NR_getpid 20
-#define __NR_mount 21
-#define __NR_umount 22
-#define __NR_setuid 23
-#define __NR_getuid 24
-#define __NR_stime 25
-#define __NR_ptrace 26
-#define __NR_alarm 27
-#define __NR_oldfstat 28
-#define __NR_pause 29
-#define __NR_utime 30
-#define __NR_stty 31
-#define __NR_gtty 32
-#define __NR_access 33
-#define __NR_nice 34
-#define __NR_ftime 35
-#define __NR_sync 36
-#define __NR_kill 37
-#define __NR_rename 38
-#define __NR_mkdir 39
-#define __NR_rmdir 40
-#define __NR_dup 41
-#define __NR_pipe 42
-#define __NR_times 43
-#define __NR_prof 44
-#define __NR_brk 45
-#define __NR_setgid 46
-#define __NR_getgid 47
-#define __NR_signal 48
-#define __NR_geteuid 49
-#define __NR_getegid 50
-#define __NR_acct 51
-#define __NR_umount2 52
-#define __NR_lock 53
-#define __NR_ioctl 54
-#define __NR_fcntl 55
-#define __NR_mpx 56
-#define __NR_setpgid 57
-#define __NR_ulimit 58
-#define __NR_oldolduname 59
-#define __NR_umask 60
-#define __NR_chroot 61
-#define __NR_ustat 62
-#define __NR_dup2 63
-#define __NR_getppid 64
-#define __NR_getpgrp 65
-#define __NR_setsid 66
-#define __NR_sigaction 67
-#define __NR_sgetmask 68
-#define __NR_ssetmask 69
-#define __NR_setreuid 70
-#define __NR_setregid 71
-#define __NR_sigsuspend 72
-#define __NR_sigpending 73
-#define __NR_sethostname 74
-#define __NR_setrlimit 75
-#define __NR_getrlimit 76
-#define __NR_getrusage 77
-#define __NR_gettimeofday 78
-#define __NR_settimeofday 79
-#define __NR_getgroups 80
-#define __NR_setgroups 81
-#define __NR_select 82
-#define __NR_symlink 83
-#define __NR_oldlstat 84
-#define __NR_readlink 85
-#define __NR_uselib 86
-#define __NR_swapon 87
-#define __NR_reboot 88
-#define __NR_readdir 89
-#define __NR_mmap 90
-#define __NR_munmap 91
-#define __NR_truncate 92
-#define __NR_ftruncate 93
-#define __NR_fchmod 94
-#define __NR_fchown 95
-#define __NR_getpriority 96
-#define __NR_setpriority 97
-#define __NR_profil 98
-#define __NR_statfs 99
-#define __NR_fstatfs 100
-#define __NR_ioperm 101
-#define __NR_socketcall 102
-#define __NR_syslog 103
-#define __NR_setitimer 104
-#define __NR_getitimer 105
-#define __NR_stat 106
-#define __NR_lstat 107
-#define __NR_fstat 108
-#define __NR_olduname 109
-#define __NR_iopl /* 110 */ not supported
-#define __NR_vhangup 111
-#define __NR_idle /* 112 */ Obsolete
-#define __NR_vm86 /* 113 */ not supported
-#define __NR_wait4 114
-#define __NR_swapoff 115
-#define __NR_sysinfo 116
-#define __NR_ipc 117
-#define __NR_fsync 118
-#define __NR_sigreturn 119
-#define __NR_clone 120
-#define __NR_setdomainname 121
-#define __NR_uname 122
-#define __NR_cacheflush 123
-#define __NR_adjtimex 124
-#define __NR_mprotect 125
-#define __NR_sigprocmask 126
-#define __NR_create_module 127
-#define __NR_init_module 128
-#define __NR_delete_module 129
-#define __NR_get_kernel_syms 130
-#define __NR_quotactl 131
-#define __NR_getpgid 132
-#define __NR_fchdir 133
-#define __NR_bdflush 134
-#define __NR_sysfs 135
-#define __NR_personality 136
-#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
-#define __NR_setfsuid 138
-#define __NR_setfsgid 139
-#define __NR__llseek 140
-#define __NR_getdents 141
-#define __NR__newselect 142
-#define __NR_flock 143
-#define __NR_msync 144
-#define __NR_readv 145
-#define __NR_writev 146
-#define __NR_getsid 147
-#define __NR_fdatasync 148
-#define __NR__sysctl 149
-#define __NR_mlock 150
-#define __NR_munlock 151
-#define __NR_mlockall 152
-#define __NR_munlockall 153
-#define __NR_sched_setparam 154
-#define __NR_sched_getparam 155
-#define __NR_sched_setscheduler 156
-#define __NR_sched_getscheduler 157
-#define __NR_sched_yield 158
-#define __NR_sched_get_priority_max 159
-#define __NR_sched_get_priority_min 160
-#define __NR_sched_rr_get_interval 161
-#define __NR_nanosleep 162
-#define __NR_mremap 163
-#define __NR_setresuid 164
-#define __NR_getresuid 165
-#define __NR_getpagesize 166
-#define __NR_query_module 167
-#define __NR_poll 168
-#define __NR_nfsservctl 169
-#define __NR_setresgid 170
-#define __NR_getresgid 171
-#define __NR_prctl 172
-#define __NR_rt_sigreturn 173
-#define __NR_rt_sigaction 174
-#define __NR_rt_sigprocmask 175
-#define __NR_rt_sigpending 176
-#define __NR_rt_sigtimedwait 177
-#define __NR_rt_sigqueueinfo 178
-#define __NR_rt_sigsuspend 179
-#define __NR_pread64 180
-#define __NR_pwrite64 181
-#define __NR_lchown 182
-#define __NR_getcwd 183
-#define __NR_capget 184
-#define __NR_capset 185
-#define __NR_sigaltstack 186
-#define __NR_sendfile 187
-#define __NR_getpmsg 188 /* some people actually want streams */
-#define __NR_putpmsg 189 /* some people actually want streams */
-#define __NR_vfork 190
-#define __NR_ugetrlimit 191
-#define __NR_mmap2 192
-#define __NR_truncate64 193
-#define __NR_ftruncate64 194
-#define __NR_stat64 195
-#define __NR_lstat64 196
-#define __NR_fstat64 197
-#define __NR_chown32 198
-#define __NR_getuid32 199
-#define __NR_getgid32 200
-#define __NR_geteuid32 201
-#define __NR_getegid32 202
-#define __NR_setreuid32 203
-#define __NR_setregid32 204
-#define __NR_getgroups32 205
-#define __NR_setgroups32 206
-#define __NR_fchown32 207
-#define __NR_setresuid32 208
-#define __NR_getresuid32 209
-#define __NR_setresgid32 210
-#define __NR_getresgid32 211
-#define __NR_lchown32 212
-#define __NR_setuid32 213
-#define __NR_setgid32 214
-#define __NR_setfsuid32 215
-#define __NR_setfsgid32 216
-#define __NR_pivot_root 217
-#define __NR_getdents64 220
-#define __NR_gettid 221
-#define __NR_tkill 222
-#define __NR_setxattr 223
-#define __NR_lsetxattr 224
-#define __NR_fsetxattr 225
-#define __NR_getxattr 226
-#define __NR_lgetxattr 227
-#define __NR_fgetxattr 228
-#define __NR_listxattr 229
-#define __NR_llistxattr 230
-#define __NR_flistxattr 231
-#define __NR_removexattr 232
-#define __NR_lremovexattr 233
-#define __NR_fremovexattr 234
-#define __NR_futex 235
-#define __NR_sendfile64 236
-#define __NR_mincore 237
-#define __NR_madvise 238
-#define __NR_fcntl64 239
-#define __NR_readahead 240
-#define __NR_io_setup 241
-#define __NR_io_destroy 242
-#define __NR_io_getevents 243
-#define __NR_io_submit 244
-#define __NR_io_cancel 245
-#define __NR_fadvise64 246
-#define __NR_exit_group 247
-#define __NR_lookup_dcookie 248
-#define __NR_epoll_create 249
-#define __NR_epoll_ctl 250
-#define __NR_epoll_wait 251
-#define __NR_remap_file_pages 252
-#define __NR_set_tid_address 253
-#define __NR_timer_create 254
-#define __NR_timer_settime 255
-#define __NR_timer_gettime 256
-#define __NR_timer_getoverrun 257
-#define __NR_timer_delete 258
-#define __NR_clock_settime 259
-#define __NR_clock_gettime 260
-#define __NR_clock_getres 261
-#define __NR_clock_nanosleep 262
-#define __NR_statfs64 263
-#define __NR_fstatfs64 264
-#define __NR_tgkill 265
-#define __NR_utimes 266
-#define __NR_fadvise64_64 267
-#define __NR_mbind 268
-#define __NR_get_mempolicy 269
-#define __NR_set_mempolicy 270
-#define __NR_mq_open 271
-#define __NR_mq_unlink 272
-#define __NR_mq_timedsend 273
-#define __NR_mq_timedreceive 274
-#define __NR_mq_notify 275
-#define __NR_mq_getsetattr 276
-#define __NR_waitid 277
-#define __NR_vserver 278
-#define __NR_add_key 279
-#define __NR_request_key 280
-#define __NR_keyctl 281
-#define __NR_ioprio_set 282
-#define __NR_ioprio_get 283
-#define __NR_inotify_init 284
-#define __NR_inotify_add_watch 285
-#define __NR_inotify_rm_watch 286
-#define __NR_migrate_pages 287
-#define __NR_openat 288
-#define __NR_mkdirat 289
-#define __NR_mknodat 290
-#define __NR_fchownat 291
-#define __NR_futimesat 292
-#define __NR_fstatat64 293
-#define __NR_unlinkat 294
-#define __NR_renameat 295
-#define __NR_linkat 296
-#define __NR_symlinkat 297
-#define __NR_readlinkat 298
-#define __NR_fchmodat 299
-#define __NR_faccessat 300
-#define __NR_pselect6 301
-#define __NR_ppoll 302
-#define __NR_unshare 303
-#define __NR_set_robust_list 304
-#define __NR_get_robust_list 305
-#define __NR_splice 306
-#define __NR_sync_file_range 307
-#define __NR_tee 308
-#define __NR_vmsplice 309
-#define __NR_move_pages 310
-#define __NR_sched_setaffinity 311
-#define __NR_sched_getaffinity 312
-#define __NR_kexec_load 313
-#define __NR_getcpu 314
-#define __NR_epoll_pwait 315
-#define __NR_utimensat 316
-#define __NR_signalfd 317
-#define __NR_timerfd_create 318
-#define __NR_eventfd 319
-#define __NR_fallocate 320
-#define __NR_timerfd_settime 321
-#define __NR_timerfd_gettime 322
-
-#ifdef __KERNEL__
-
-#define NR_syscalls 323
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_M68K_UNISTD_H_ */
+++ /dev/null
-#include <asm-m68k/user.h>
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff