#include <asm/cache.h>
+/*
+ * We can't do CPP stringification and concatination directly into the section
+ * name for some reason, so these macros can do it for us.
+ */
+.macro define_ftsec name
+ .section ".head.text.\name\()","ax",@progbits
+.endm
+.macro define_data_ftsec name
+ .section ".head.data.\name\()","a",@progbits
+.endm
+.macro use_ftsec name
+ .section ".head.text.\name\()"
+.endm
+
+/*
+ * Fixed (location) sections are used by opening fixed sections and emitting
+ * fixed section entries into them before closing them. Multiple fixed sections
+ * can be open at any time.
+ *
+ * Each fixed section created in a .S file must have corresponding linkage
+ * directives including location, added to arch/powerpc/kernel/vmlinux.lds.S
+ *
+ * For each fixed section, code is generated into it in the order which it
+ * appears in the source. Fixed section entries can be placed at a fixed
+ * location within the section using _LOCATION postifx variants. These must
+ * be ordered according to their relative placements within the section.
+ *
+ * OPEN_FIXED_SECTION(section_name, start_address, end_address)
+ * FIXED_SECTION_ENTRY_BEGIN(section_name, label1)
+ *
+ * USE_FIXED_SECTION(section_name)
+ * label3:
+ * li r10,128
+ * mv r11,r10
+
+ * FIXED_SECTION_ENTRY_BEGIN_LOCATION(section_name, label2, start_address)
+ * FIXED_SECTION_ENTRY_END_LOCATION(section_name, label2, end_address)
+ * CLOSE_FIXED_SECTION(section_name)
+ *
+ * ZERO_FIXED_SECTION can be used to emit zeroed data.
+ *
+ * Troubleshooting:
+ * - If the build dies with "Error: attempt to move .org backwards" at
+ * CLOSE_FIXED_SECTION() or elsewhere, there may be something
+ * unexpected being added there. Remove the '. = x_len' line, rebuild, and
+ * check what is pushing the section down.
+ * - If the build dies in linking, check arch/powerpc/kernel/vmlinux.lds.S
+ * for instructions.
+ * - If the kernel crashes or hangs in very early boot, it could be linker
+ * stubs at the start of the main text.
+ */
+
+#define OPEN_FIXED_SECTION(sname, start, end) \
+ sname##_start = (start); \
+ sname##_end = (end); \
+ sname##_len = (end) - (start); \
+ define_ftsec sname; \
+ . = 0x0; \
+start_##sname:
+
+#define OPEN_TEXT_SECTION(start) \
+ text_start = (start); \
+ .section ".text","ax",@progbits; \
+ . = 0x0; \
+start_text:
+
+#define ZERO_FIXED_SECTION(sname, start, end) \
+ sname##_start = (start); \
+ sname##_end = (end); \
+ sname##_len = (end) - (start); \
+ define_data_ftsec sname; \
+ . = 0x0; \
+ . = sname##_len;
+
+#define USE_FIXED_SECTION(sname) \
+ fs_label = start_##sname; \
+ fs_start = sname##_start; \
+ use_ftsec sname;
+
+#define USE_TEXT_SECTION() \
+ fs_label = start_text; \
+ fs_start = text_start; \
+ .text
+
+#define CLOSE_FIXED_SECTION(sname) \
+ USE_FIXED_SECTION(sname); \
+ . = sname##_len; \
+end_##sname:
+
+
+#define __FIXED_SECTION_ENTRY_BEGIN(sname, name, __align) \
+ USE_FIXED_SECTION(sname); \
+ .align __align; \
+ .global name; \
+name:
+
+#define FIXED_SECTION_ENTRY_BEGIN(sname, name) \
+ __FIXED_SECTION_ENTRY_BEGIN(sname, name, 0)
+
+#define FIXED_SECTION_ENTRY_BEGIN_LOCATION(sname, name, start) \
+ USE_FIXED_SECTION(sname); \
+ name##_start = (start); \
+ .if (start) < sname##_start; \
+ .error "Fixed section underflow"; \
+ .abort; \
+ .endif; \
+ . = (start) - sname##_start; \
+ .global name; \
+name:
+
+#define FIXED_SECTION_ENTRY_END_LOCATION(sname, name, end) \
+ .if (end) > sname##_end; \
+ .error "Fixed section overflow"; \
+ .abort; \
+ .endif; \
+ .if (. - name > end - name##_start); \
+ .error "Fixed entry overflow"; \
+ .abort; \
+ .endif; \
+ . = ((end) - sname##_start); \
+
+
+/*
+ * These macros are used to change symbols in other fixed sections to be
+ * absolute or related to our current fixed section.
+ *
+ * - DEFINE_FIXED_SYMBOL / FIXED_SYMBOL_ABS_ADDR is used to find the
+ * absolute address of a symbol within a fixed section, from any section.
+ *
+ * - ABS_ADDR is used to find the absolute address of any symbol, from within
+ * a fixed section.
+ */
+#define DEFINE_FIXED_SYMBOL(label) \
+ label##_absolute = (label - fs_label + fs_start)
+
+#define FIXED_SYMBOL_ABS_ADDR(label) \
+ (label##_absolute)
+
+#define ABS_ADDR(label) (label - fs_label + fs_start)
+
+/*
+ * Following are the BOOK3S exception handler helper macros.
+ * Handlers come in a number of types, and each type has a number of varieties.
+ *
+ * EXC_REAL_* - real, unrelocated exception vectors
+ * EXC_VIRT_* - virt (AIL), unrelocated exception vectors
+ * TRAMP_REAL_* - real, unrelocated helpers (virt can call these)
+ * TRAMP_VIRT_* - virt, unreloc helpers (in practice, real can use)
+ * TRAMP_KVM - KVM handlers that get put into real, unrelocated
+ * EXC_COMMON_* - virt, relocated common handlers
+ *
+ * The EXC handlers are given a name, and branch to name_common, or the
+ * appropriate KVM or masking function. Vector handler verieties are as
+ * follows:
+ *
+ * EXC_{REAL|VIRT}_BEGIN/END - used to open-code the exception
+ *
+ * EXC_{REAL|VIRT} - standard exception
+ *
+ * EXC_{REAL|VIRT}_suffix
+ * where _suffix is:
+ * - _MASKABLE - maskable exception
+ * - _OOL - out of line with trampoline to common handler
+ * - _HV - HV exception
+ *
+ * There can be combinations, e.g., EXC_VIRT_OOL_MASKABLE_HV
+ *
+ * The one unusual case is __EXC_REAL_OOL_HV_DIRECT, which is
+ * an OOL vector that branches to a specified handler rather than the usual
+ * trampoline that goes to common. It, and other underscore macros, should
+ * be used with care.
+ *
+ * KVM handlers come in the following verieties:
+ * TRAMP_KVM
+ * TRAMP_KVM_SKIP
+ * TRAMP_KVM_HV
+ * TRAMP_KVM_HV_SKIP
+ *
+ * COMMON handlers come in the following verieties:
+ * EXC_COMMON_BEGIN/END - used to open-code the handler
+ * EXC_COMMON
+ * EXC_COMMON_ASYNC
+ * EXC_COMMON_HV
+ *
+ * TRAMP_REAL and TRAMP_VIRT can be used with BEGIN/END. KVM
+ * and OOL handlers are implemented as types of TRAMP and TRAMP_VIRT handlers.
+ */
+
#define EXC_REAL_BEGIN(name, start, end) \
- . = start ; \
- .global exc_real_##start##_##name ; \
-exc_real_##start##_##name:
+ FIXED_SECTION_ENTRY_BEGIN_LOCATION(real_vectors, exc_real_##start##_##name, start)
-#define EXC_REAL_END(name, start, end)
+#define EXC_REAL_END(name, start, end) \
+ FIXED_SECTION_ENTRY_END_LOCATION(real_vectors, exc_real_##start##_##name, end)
#define EXC_VIRT_BEGIN(name, start, end) \
- . = start ; \
- .global exc_virt_##start##_##name ; \
-exc_virt_##start##_##name:
+ FIXED_SECTION_ENTRY_BEGIN_LOCATION(virt_vectors, exc_virt_##start##_##name, start)
-#define EXC_VIRT_END(name, start, end)
+#define EXC_VIRT_END(name, start, end) \
+ FIXED_SECTION_ENTRY_END_LOCATION(virt_vectors, exc_virt_##start##_##name, end)
#define EXC_COMMON_BEGIN(name) \
+ USE_TEXT_SECTION(); \
.align 7; \
.global name; \
+ DEFINE_FIXED_SYMBOL(name); \
name:
#define TRAMP_REAL_BEGIN(name) \
- .global name ; \
-name:
+ FIXED_SECTION_ENTRY_BEGIN(real_trampolines, name)
+
+#define TRAMP_VIRT_BEGIN(name) \
+ FIXED_SECTION_ENTRY_BEGIN(virt_trampolines, name)
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
#define TRAMP_KVM_BEGIN(name) \
#define TRAMP_KVM_BEGIN(name)
#endif
-#define EXC_REAL_NONE(start, end)
+#define EXC_REAL_NONE(start, end) \
+ FIXED_SECTION_ENTRY_BEGIN_LOCATION(real_vectors, exc_real_##start##_##unused, start); \
+ FIXED_SECTION_ENTRY_END_LOCATION(real_vectors, exc_real_##start##_##unused, end)
-#define EXC_VIRT_NONE(start, end)
+#define EXC_VIRT_NONE(start, end) \
+ FIXED_SECTION_ENTRY_BEGIN_LOCATION(virt_vectors, exc_virt_##start##_##unused, start); \
+ FIXED_SECTION_ENTRY_END_LOCATION(virt_vectors, exc_virt_##start##_##unused, end);
#define EXC_REAL(name, start, end) \
TRAMP_REAL_BEGIN(tramp_real_##name); \
STD_EXCEPTION_PSERIES_OOL(vec, name##_common); \
+#define EXC_REAL_OOL(name, start, end) \
+ __EXC_REAL_OOL(name, start, end); \
+ __TRAMP_REAL_REAL_OOL(name, start);
+
#define __EXC_REAL_OOL_MASKABLE(name, start, end) \
__EXC_REAL_OOL(name, start, end);
TRAMP_REAL_BEGIN(tramp_real_##name); \
MASKABLE_EXCEPTION_PSERIES_OOL(vec, name##_common); \
+#define EXC_REAL_OOL_MASKABLE(name, start, end) \
+ __EXC_REAL_OOL_MASKABLE(name, start, end); \
+ __TRAMP_REAL_REAL_OOL_MASKABLE(name, start);
+
#define __EXC_REAL_OOL_HV_DIRECT(name, start, end, handler) \
EXC_REAL_BEGIN(name, start, end); \
__OOL_EXCEPTION(start, label, handler); \
TRAMP_REAL_BEGIN(tramp_real_##name); \
STD_EXCEPTION_HV_OOL(vec, name##_common); \
+#define EXC_REAL_OOL_HV(name, start, end) \
+ __EXC_REAL_OOL_HV(name, start, end); \
+ __TRAMP_REAL_REAL_OOL_HV(name, start);
+
#define __EXC_REAL_OOL_MASKABLE_HV(name, start, end) \
__EXC_REAL_OOL(name, start, end);
TRAMP_REAL_BEGIN(tramp_real_##name); \
MASKABLE_EXCEPTION_HV_OOL(vec, name##_common); \
+#define EXC_REAL_OOL_MASKABLE_HV(name, start, end) \
+ __EXC_REAL_OOL_MASKABLE_HV(name, start, end); \
+ __TRAMP_REAL_REAL_OOL_MASKABLE_HV(name, start);
+
#define __EXC_VIRT_OOL(name, start, end) \
EXC_VIRT_BEGIN(name, start, end); \
__OOL_EXCEPTION(start, label, tramp_virt_##name); \
EXC_VIRT_END(name, start, end);
#define __TRAMP_REAL_VIRT_OOL(name, realvec) \
- TRAMP_REAL_BEGIN(tramp_virt_##name); \
+ TRAMP_VIRT_BEGIN(tramp_virt_##name); \
STD_RELON_EXCEPTION_PSERIES_OOL(realvec, name##_common); \
+#define EXC_VIRT_OOL(name, start, end, realvec) \
+ __EXC_VIRT_OOL(name, start, end); \
+ __TRAMP_REAL_VIRT_OOL(name, realvec);
+
#define __EXC_VIRT_OOL_MASKABLE(name, start, end) \
__EXC_VIRT_OOL(name, start, end);
#define __TRAMP_REAL_VIRT_OOL_MASKABLE(name, realvec) \
- TRAMP_REAL_BEGIN(tramp_virt_##name); \
+ TRAMP_VIRT_BEGIN(tramp_virt_##name); \
MASKABLE_RELON_EXCEPTION_PSERIES_OOL(realvec, name##_common); \
+#define EXC_VIRT_OOL_MASKABLE(name, start, end, realvec) \
+ __EXC_VIRT_OOL_MASKABLE(name, start, end); \
+ __TRAMP_REAL_VIRT_OOL_MASKABLE(name, realvec);
+
#define __EXC_VIRT_OOL_HV(name, start, end) \
__EXC_VIRT_OOL(name, start, end);
#define __TRAMP_REAL_VIRT_OOL_HV(name, realvec) \
- TRAMP_REAL_BEGIN(tramp_virt_##name); \
+ TRAMP_VIRT_BEGIN(tramp_virt_##name); \
STD_RELON_EXCEPTION_HV_OOL(realvec, name##_common); \
+#define EXC_VIRT_OOL_HV(name, start, end, realvec) \
+ __EXC_VIRT_OOL_HV(name, start, end); \
+ __TRAMP_REAL_VIRT_OOL_HV(name, realvec);
+
#define __EXC_VIRT_OOL_MASKABLE_HV(name, start, end) \
__EXC_VIRT_OOL(name, start, end);
#define __TRAMP_REAL_VIRT_OOL_MASKABLE_HV(name, realvec) \
- TRAMP_REAL_BEGIN(tramp_virt_##name); \
+ TRAMP_VIRT_BEGIN(tramp_virt_##name); \
MASKABLE_RELON_EXCEPTION_HV_OOL(realvec, name##_common); \
+#define EXC_VIRT_OOL_MASKABLE_HV(name, start, end, realvec) \
+ __EXC_VIRT_OOL_MASKABLE_HV(name, start, end); \
+ __TRAMP_REAL_VIRT_OOL_MASKABLE_HV(name, realvec);
+
#define TRAMP_KVM(area, n) \
TRAMP_KVM_BEGIN(do_kvm_##n); \
KVM_HANDLER(area, EXC_STD, n); \
TRAMP_KVM_BEGIN(do_kvm_##n); \
KVM_HANDLER_SKIP(area, EXC_STD, n); \
+/*
+ * HV variant exceptions get the 0x2 bit added to their trap number.
+ */
#define TRAMP_KVM_HV(area, n) \
TRAMP_KVM_BEGIN(do_kvm_H##n); \
KVM_HANDLER(area, EXC_HV, n + 0x2); \
#include <asm/head-64.h>
/*
+ * There are a few constraints to be concerned with.
+ * - Real mode exceptions code/data must be located at their physical location.
+ * - Virtual mode exceptions must be mapped at their 0xc000... location.
+ * - Fixed location code must not call directly beyond the __end_interrupts
+ * area when built with CONFIG_RELOCATABLE. LOAD_HANDLER / bctr sequence
+ * must be used.
+ * - LOAD_HANDLER targets must be within first 64K of physical 0 /
+ * virtual 0xc00...
+ * - Conditional branch targets must be within +/-32K of caller.
+ *
+ * "Virtual exceptions" run with relocation on (MSR_IR=1, MSR_DR=1), and
+ * therefore don't have to run in physically located code or rfid to
+ * virtual mode kernel code. However on relocatable kernels they do have
+ * to branch to KERNELBASE offset because the rest of the kernel (outside
+ * the exception vectors) may be located elsewhere.
+ *
+ * Virtual exceptions correspond with physical, except their entry points
+ * are offset by 0xc000000000000000 and also tend to get an added 0x4000
+ * offset applied. Virtual exceptions are enabled with the Alternate
+ * Interrupt Location (AIL) bit set in the LPCR. However this does not
+ * guarantee they will be delivered virtually. Some conditions (see the ISA)
+ * cause exceptions to be delivered in real mode.
+ *
+ * It's impossible to receive interrupts below 0x300 via AIL.
+ *
+ * KVM: None of the virtual exceptions are from the guest. Anything that
+ * escalated to HV=1 from HV=0 is delivered via real mode handlers.
+ *
+ *
* We layout physical memory as follows:
* 0x0000 - 0x00ff : Secondary processor spin code
- * 0x0100 - 0x17ff : pSeries Interrupt prologs
- * 0x1800 - 0x4000 : interrupt support common interrupt prologs
- * 0x4000 - 0x5fff : pSeries interrupts with IR=1,DR=1
- * 0x6000 - 0x6fff : more interrupt support including for IR=1,DR=1
+ * 0x0100 - 0x18ff : Real mode pSeries interrupt vectors
+ * 0x1900 - 0x3fff : Real mode trampolines
+ * 0x4000 - 0x58ff : Relon (IR=1,DR=1) mode pSeries interrupt vectors
+ * 0x5900 - 0x6fff : Relon mode trampolines
* 0x7000 - 0x7fff : FWNMI data area
- * 0x8000 - 0x8fff : Initial (CPU0) segment table
- * 0x9000 - : Early init and support code
+ * 0x8000 - .... : Common interrupt handlers, remaining early
+ * setup code, rest of kernel.
+ */
+OPEN_FIXED_SECTION(real_vectors, 0x0100, 0x1900)
+OPEN_FIXED_SECTION(real_trampolines, 0x1900, 0x4000)
+OPEN_FIXED_SECTION(virt_vectors, 0x4000, 0x5900)
+OPEN_FIXED_SECTION(virt_trampolines, 0x5900, 0x7000)
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
+/*
+ * Data area reserved for FWNMI option.
+ * This address (0x7000) is fixed by the RPA.
+ * pseries and powernv need to keep the whole page from
+ * 0x7000 to 0x8000 free for use by the firmware
*/
+ZERO_FIXED_SECTION(fwnmi_page, 0x7000, 0x8000)
+OPEN_TEXT_SECTION(0x8000)
+#else
+OPEN_TEXT_SECTION(0x7000)
+#endif
+
+USE_FIXED_SECTION(real_vectors)
+
+#define LOAD_SYSCALL_HANDLER(reg) \
+ ld reg,PACAKBASE(r13); \
+ ori reg,reg,(ABS_ADDR(system_call_common))@l;
+
/* Syscall routine is used twice, in reloc-off and reloc-on paths */
#define SYSCALL_PSERIES_1 \
BEGIN_FTR_SECTION \
#define SYSCALL_PSERIES_2_RFID \
mfspr r12,SPRN_SRR1 ; \
- LOAD_HANDLER(r10, system_call_common) ; \
+ LOAD_SYSCALL_HANDLER(r10) ; \
mtspr SPRN_SRR0,r10 ; \
ld r10,PACAKMSR(r13) ; \
mtspr SPRN_SRR1,r10 ; \
* is volatile across system calls.
*/
#define SYSCALL_PSERIES_2_DIRECT \
- LOAD_HANDLER(r12, system_call_common) ; \
+ LOAD_SYSCALL_HANDLER(r12) ; \
mtctr r12 ; \
mfspr r12,SPRN_SRR1 ; \
li r10,MSR_RI ; \
* Therefore any relative branches in this section must only
* branch to labels in this section.
*/
- . = 0x100
.globl __start_interrupts
__start_interrupts:
#endif
EXC_REAL_END(instruction_access_slb, 0x480, 0x500)
- /* We open code these as we can't have a ". = x" (even with
- * x = "." within a feature section
- */
EXC_REAL_BEGIN(hardware_interrupt, 0x500, 0x600)
.globl hardware_interrupt_hv;
hardware_interrupt_hv:
EXC_REAL_NONE(0xfa0, 0x1200)
-
#ifdef CONFIG_CBE_RAS
EXC_REAL_HV(cbe_system_error, 0x1200, 0x1300)
#else /* CONFIG_CBE_RAS */
EXC_REAL_NONE(0x1800, 0x1900)
- . = 0x1800
#endif
GET_SCRATCH0(r13); \
##_H##rfid; \
b .
-
+
+/*
+ * Real mode exceptions actually use this too, but alternate
+ * instruction code patches (which end up in the common .text area)
+ * cannot reach these if they are put there.
+ */
+USE_FIXED_SECTION(virt_trampolines)
MASKED_INTERRUPT()
MASKED_INTERRUPT(H)
* in the generated frame has EE set to 1 or the exception
* handler will not properly re-enable them.
*/
+USE_TEXT_SECTION()
_GLOBAL(__replay_interrupt)
/* We are going to jump to the exception common code which
* will retrieve various register values from the PACA which
EXC_VIRT_NONE(0x5800, 0x5900)
-TRAMP_REAL_BEGIN(ppc64_runlatch_on_trampoline)
+EXC_COMMON_BEGIN(ppc64_runlatch_on_trampoline)
b __ppc64_runlatch_on
/*
__TRAMP_REAL_VIRT_OOL(facility_unavailable, 0xf60)
__TRAMP_REAL_VIRT_OOL_HV(h_facility_unavailable, 0xf80)
+USE_FIXED_SECTION(virt_trampolines)
/*
* The __end_interrupts marker must be past the out-of-line (OOL)
* handlers, so that they are copied to real address 0x100 when running
.align 7
.globl __end_interrupts
__end_interrupts:
-
-#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
-/*
- * Data area reserved for FWNMI option.
- * This address (0x7000) is fixed by the RPA.
- */
- .= 0x7000
- .globl fwnmi_data_area
-fwnmi_data_area:
-
- /* pseries and powernv need to keep the whole page from
- * 0x7000 to 0x8000 free for use by the firmware
- */
- . = 0x8000
-#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
+DEFINE_FIXED_SYMBOL(__end_interrupts)
EXC_COMMON(facility_unavailable_common, 0xf60, facility_unavailable_exception)
EXC_COMMON(h_facility_unavailable_common, 0xf80, facility_unavailable_exception)
#endif /* CONFIG_CBE_RAS */
-EXC_COMMON_BEGIN(hmi_exception_early)
+TRAMP_REAL_BEGIN(hmi_exception_early)
EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST_HV, 0xe60)
mr r10,r1 /* Save r1 */
ld r1,PACAEMERGSP(r13) /* Use emergency stack */
blr
#endif
+CLOSE_FIXED_SECTION(real_vectors);
+CLOSE_FIXED_SECTION(real_trampolines);
+CLOSE_FIXED_SECTION(virt_vectors);
+CLOSE_FIXED_SECTION(virt_trampolines);
+
+USE_TEXT_SECTION()
+
/*
* Hash table stuff
*/
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/ppc_asm.h>
+#include <asm/head-64.h>
#include <asm/asm-offsets.h>
#include <asm/bug.h>
#include <asm/cputable.h>
* 2. The kernel is entered at __start
*/
- .text
- .globl _stext
-_stext:
+OPEN_FIXED_SECTION(first_256B, 0x0, 0x100)
+USE_FIXED_SECTION(first_256B)
+ /*
+ * Offsets are relative from the start of fixed section, and
+ * first_256B starts at 0. Offsets are a bit easier to use here
+ * than the fixed section entry macros.
+ */
+ . = 0x0
_GLOBAL(__start)
/* NOP this out unconditionally */
BEGIN_FTR_SECTION
. = 0x5c
.globl __run_at_load
__run_at_load:
+DEFINE_FIXED_SYMBOL(__run_at_load)
.long 0x72756e30 /* "run0" -- relocate to 0 by default */
#endif
/* Tell the master cpu we're here */
/* Relocation is off & we are located at an address less */
/* than 0x100, so only need to grab low order offset. */
- std r24,__secondary_hold_acknowledge-_stext(0)
+ std r24,(ABS_ADDR(__secondary_hold_acknowledge))(0)
sync
li r26,0
tovirt(r26,r26)
#endif
/* All secondary cpus wait here until told to start. */
-100: ld r12,__secondary_hold_spinloop-_stext(r26)
+100: ld r12,(ABS_ADDR(__secondary_hold_spinloop))(r26)
cmpdi 0,r12,0
beq 100b
#else
BUG_OPCODE
#endif
+CLOSE_FIXED_SECTION(first_256B)
/* This value is used to mark exception frames on the stack. */
.section ".toc","aw"
exception_marker:
.tc ID_72656773_68657265[TC],0x7265677368657265
- .text
+ .previous
/*
* On server, we include the exception vectors code here as it
*/
#ifdef CONFIG_PPC_BOOK3S
#include "exceptions-64s.S"
+#else
+OPEN_TEXT_SECTION(0x100)
#endif
+USE_TEXT_SECTION()
+
#ifdef CONFIG_PPC_BOOK3E
/*
* The booting_thread_hwid holds the thread id we want to boot in cpu
#if defined(CONFIG_PPC_BOOK3E)
tovirt(r26,r26) /* on booke, we already run at PAGE_OFFSET */
#endif
- lwz r7,__run_at_load-_stext(r26)
+ lwz r7,(FIXED_SYMBOL_ABS_ADDR(__run_at_load))(r26)
#if defined(CONFIG_PPC_BOOK3E)
tophys(r26,r26)
#endif
#if defined(CONFIG_PPC_BOOK3E)
tovirt(r26,r26) /* on booke, we already run at PAGE_OFFSET */
#endif
- lwz r7,__run_at_load-_stext(r26)
+ lwz r7,(FIXED_SYMBOL_ABS_ADDR(__run_at_load))(r26)
cmplwi cr0,r7,1
bne 3f
sub r5,r5,r11
#else
/* just copy interrupts */
- LOAD_REG_IMMEDIATE(r5, __end_interrupts - _stext)
+ LOAD_REG_IMMEDIATE(r5, FIXED_SYMBOL_ABS_ADDR(__end_interrupts))
#endif
b 5f
3:
#endif
- lis r5,(copy_to_here - _stext)@ha
- addi r5,r5,(copy_to_here - _stext)@l /* # bytes of memory to copy */
+ /* # bytes of memory to copy */
+ lis r5,(ABS_ADDR(copy_to_here))@ha
+ addi r5,r5,(ABS_ADDR(copy_to_here))@l
bl copy_and_flush /* copy the first n bytes */
/* this includes the code being */
/* executed here. */
- addis r8,r3,(4f - _stext)@ha /* Jump to the copy of this code */
- addi r12,r8,(4f - _stext)@l /* that we just made */
+ /* Jump to the copy of this code that we just made */
+ addis r8,r3,(ABS_ADDR(4f))@ha
+ addi r12,r8,(ABS_ADDR(4f))@l
mtctr r12
bctr
* Now copy the rest of the kernel up to _end, add
* _end - copy_to_here to the copy limit and run again.
*/
- addis r8,r26,(p_end - _stext)@ha
- ld r8,(p_end - _stext)@l(r8)
+ addis r8,r26,(ABS_ADDR(p_end))@ha
+ ld r8,(ABS_ADDR(p_end))@l(r8)
add r5,r5,r8
5: bl copy_and_flush /* copy the rest */
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff