[PATCH] ide: clean up pdc202xx_old so its more readable (done so I could work on...
authorAlan Cox <alan@lxorguk.ukuu.org.uk>
Wed, 28 Jun 2006 11:27:03 +0000 (04:27 -0700)
committerLinus Torvalds <torvalds@g5.osdl.org>
Wed, 28 Jun 2006 21:59:07 +0000 (14:59 -0700)
Also sets the new fifo flag so that we don't hang on some errors with this
chipset.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/ide/pci/pdc202xx_old.c

index 22d17548ecdbd273628c19c303cc914f8c5b25d3..26bc688a18212a748f2779de3ef64c0d962b3ce0 100644 (file)
@@ -101,31 +101,6 @@ static const char *pdc_quirk_drives[] = {
 #define        MC1             0x02    /* DMA"C" timing */
 #define        MC0             0x01    /* DMA"C" timing */
 
-#if 0
-       unsigned long bibma  = pci_resource_start(dev, 4);
-       u8 hi = 0, lo = 0;
-
-       u8 sc1c = inb_p((u16)bibma + 0x1c); 
-       u8 sc1e = inb_p((u16)bibma + 0x1e);
-       u8 sc1f = inb_p((u16)bibma + 0x1f);
-
-       p += sprintf(p, "Host Mode                            : %s\n",
-               (sc1f & 0x08) ? "Tri-Stated" : "Normal");
-       p += sprintf(p, "Bus Clocking                         : %s\n",
-               ((sc1f & 0xC0) == 0xC0) ? "100 External" :
-               ((sc1f & 0x80) == 0x80) ? "66 External" :
-               ((sc1f & 0x40) == 0x40) ? "33 External" : "33 PCI Internal");
-       p += sprintf(p, "IO pad select                        : %s mA\n",
-               ((sc1c & 0x03) == 0x03) ? "10" :
-               ((sc1c & 0x02) == 0x02) ? "8" :
-               ((sc1c & 0x01) == 0x01) ? "6" :
-               ((sc1c & 0x00) == 0x00) ? "4" : "??");
-       hi = sc1e >> 4;
-       lo = sc1e & 0xf;
-       p += sprintf(p, "Status Polling Period                : %d\n", hi);
-       p += sprintf(p, "Interrupt Check Status Polling Delay : %d\n", lo);
-#endif
-
 static u8 pdc202xx_ratemask (ide_drive_t *drive)
 {
        u8 mode;
@@ -505,42 +480,13 @@ static void pdc202xx_reset (ide_drive_t *drive)
        
        pdc202xx_reset_host(hwif);
        pdc202xx_reset_host(mate);
-#if 0
-       /*
-        * FIXME: Have to kick all the drives again :-/
-        * What a pain in the ACE!
-        */
-       if (hwif->present) {
-               u16 hunit = 0;
-               for (hunit = 0; hunit < MAX_DRIVES; ++hunit) {
-                       ide_drive_t *hdrive = &hwif->drives[hunit];
-                       if (hdrive->present) {
-                               if (hwif->ide_dma_check)
-                                       hwif->ide_dma_check(hdrive);
-                               else
-                                       hwif->tuneproc(hdrive, 5);
-                       }
-               }
-       }
-       if (mate->present) {
-               u16 munit = 0;
-               for (munit = 0; munit < MAX_DRIVES; ++munit) {
-                       ide_drive_t *mdrive = &mate->drives[munit];
-                       if (mdrive->present) {
-                               if (mate->ide_dma_check) 
-                                       mate->ide_dma_check(mdrive);
-                               else
-                                       mate->tuneproc(mdrive, 5);
-                       }
-               }
-       }
-#else
        hwif->tuneproc(drive, 5);
-#endif
 }
 
-static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev,
+                                                       const char *name)
 {
+       /* This doesn't appear needed */
        if (dev->resource[PCI_ROM_RESOURCE].start) {
                pci_write_config_dword(dev, PCI_ROM_ADDRESS,
                        dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
@@ -548,30 +494,6 @@ static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev, const c
                        name, dev->resource[PCI_ROM_RESOURCE].start);
        }
 
-       /*
-        * software reset -  this is required because the bios
-        * will set UDMA timing on if the hdd supports it. The
-        * user may want to turn udma off. A bug in the pdc20262
-        * is that it cannot handle a downgrade in timing from
-        * UDMA to DMA. Disk accesses after issuing a set
-        * feature command will result in errors. A software
-        * reset leaves the timing registers intact,
-        * but resets the drives.
-        */
-#if 0
-       if ((dev->device == PCI_DEVICE_ID_PROMISE_20267) ||
-           (dev->device == PCI_DEVICE_ID_PROMISE_20265) ||
-           (dev->device == PCI_DEVICE_ID_PROMISE_20263) ||
-           (dev->device == PCI_DEVICE_ID_PROMISE_20262)) {
-               unsigned long high_16   = pci_resource_start(dev, 4);
-               byte udma_speed_flag    = inb(high_16 + 0x001f);
-               outb(udma_speed_flag | 0x10, high_16 + 0x001f);
-               mdelay(100);
-               outb(udma_speed_flag & ~0x10, high_16 + 0x001f);
-               mdelay(2000);   /* 2 seconds ?! */
-       }
-
-#endif
        return dev->irq;
 }
 
@@ -599,6 +521,8 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
        hwif->mwdma_mask = 0x07;
        hwif->swdma_mask = 0x07;
 
+       hwif->err_stops_fifo = 1;
+
        hwif->ide_dma_check = &pdc202xx_config_drive_xfer_rate;
        hwif->ide_dma_lostirq = &pdc202xx_ide_dma_lostirq;
        hwif->ide_dma_timeout = &pdc202xx_ide_dma_timeout;
@@ -687,19 +611,6 @@ static int __devinit init_setup_pdc202ata4(struct pci_dev *dev,
                                "mirror fixed.\n", d->name);
                }
        }
-
-#if 0
-        if (dev->device == PCI_DEVICE_ID_PROMISE_20262)
-        if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) ||
-             (tmp & e->mask) != e->val))
-
-        if (d->enablebits[0].reg != d->enablebits[1].reg) {
-                d->enablebits[0].reg    = d->enablebits[1].reg;
-                d->enablebits[0].mask   = d->enablebits[1].mask;
-                d->enablebits[0].val    = d->enablebits[1].val;
-        }
-#endif
-
        return ide_setup_pci_device(dev, d);
 }
 
@@ -714,22 +625,6 @@ static int __devinit init_setup_pdc20265(struct pci_dev *dev,
                        "attached to I2O RAID controller.\n");
                return -ENODEV;
        }
-
-#if 0
-        {
-                u8 pri = 0, sec = 0;
-
-        if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) ||
-             (tmp & e->mask) != e->val))
-
-        if (d->enablebits[0].reg != d->enablebits[1].reg) {
-                d->enablebits[0].reg    = d->enablebits[1].reg;
-                d->enablebits[0].mask   = d->enablebits[1].mask;
-                d->enablebits[0].val    = d->enablebits[1].val;
-        }
-        }
-#endif
-
        return ide_setup_pci_device(dev, d);
 }