+++ /dev/null
-/*
- * AK09911 3-axis compass driver
- * Copyright (c) 2014, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/acpi.h>
-#include <linux/iio/iio.h>
-
-#define AK09911_REG_WIA1 0x00
-#define AK09911_REG_WIA2 0x01
-#define AK09911_WIA1_VALUE 0x48
-#define AK09911_WIA2_VALUE 0x05
-
-#define AK09911_REG_ST1 0x10
-#define AK09911_REG_HXL 0x11
-#define AK09911_REG_HXH 0x12
-#define AK09911_REG_HYL 0x13
-#define AK09911_REG_HYH 0x14
-#define AK09911_REG_HZL 0x15
-#define AK09911_REG_HZH 0x16
-
-#define AK09911_REG_ASAX 0x60
-#define AK09911_REG_ASAY 0x61
-#define AK09911_REG_ASAZ 0x62
-
-#define AK09911_REG_CNTL1 0x30
-#define AK09911_REG_CNTL2 0x31
-#define AK09911_REG_CNTL3 0x32
-
-#define AK09911_MODE_SNG_MEASURE 0x01
-#define AK09911_MODE_SELF_TEST 0x10
-#define AK09911_MODE_FUSE_ACCESS 0x1F
-#define AK09911_MODE_POWERDOWN 0x00
-#define AK09911_RESET_DATA 0x01
-
-#define AK09911_REG_CNTL1 0x30
-#define AK09911_REG_CNTL2 0x31
-#define AK09911_REG_CNTL3 0x32
-
-#define AK09911_RAW_TO_GAUSS(asa) ((((asa) + 128) * 6000) / 256)
-
-#define AK09911_MAX_CONVERSION_TIMEOUT_MS 500
-#define AK09911_CONVERSION_DONE_POLL_TIME_MS 10
-
-struct ak09911_data {
- struct i2c_client *client;
- struct mutex lock;
- u8 asa[3];
- long raw_to_gauss[3];
-};
-
-static const int ak09911_index_to_reg[] = {
- AK09911_REG_HXL, AK09911_REG_HYL, AK09911_REG_HZL,
-};
-
-static int ak09911_set_mode(struct i2c_client *client, u8 mode)
-{
- int ret;
-
- switch (mode) {
- case AK09911_MODE_SNG_MEASURE:
- case AK09911_MODE_SELF_TEST:
- case AK09911_MODE_FUSE_ACCESS:
- case AK09911_MODE_POWERDOWN:
- ret = i2c_smbus_write_byte_data(client,
- AK09911_REG_CNTL2, mode);
- if (ret < 0) {
- dev_err(&client->dev, "set_mode error\n");
- return ret;
- }
- /* After mode change wait atleast 100us */
- usleep_range(100, 500);
- break;
- default:
- dev_err(&client->dev,
- "%s: Unknown mode(%d).", __func__, mode);
- return -EINVAL;
- }
-
- return ret;
-}
-
-/* Get Sensitivity Adjustment value */
-static int ak09911_get_asa(struct i2c_client *client)
-{
- struct iio_dev *indio_dev = i2c_get_clientdata(client);
- struct ak09911_data *data = iio_priv(indio_dev);
- int ret;
-
- ret = ak09911_set_mode(client, AK09911_MODE_FUSE_ACCESS);
- if (ret < 0)
- return ret;
-
- /* Get asa data and store in the device data. */
- ret = i2c_smbus_read_i2c_block_data(client, AK09911_REG_ASAX,
- 3, data->asa);
- if (ret < 0) {
- dev_err(&client->dev, "Not able to read asa data\n");
- return ret;
- }
-
- ret = ak09911_set_mode(client, AK09911_MODE_POWERDOWN);
- if (ret < 0)
- return ret;
-
- data->raw_to_gauss[0] = AK09911_RAW_TO_GAUSS(data->asa[0]);
- data->raw_to_gauss[1] = AK09911_RAW_TO_GAUSS(data->asa[1]);
- data->raw_to_gauss[2] = AK09911_RAW_TO_GAUSS(data->asa[2]);
-
- return 0;
-}
-
-static int ak09911_verify_chip_id(struct i2c_client *client)
-{
- u8 wia_val[2];
- int ret;
-
- ret = i2c_smbus_read_i2c_block_data(client, AK09911_REG_WIA1,
- 2, wia_val);
- if (ret < 0) {
- dev_err(&client->dev, "Error reading WIA\n");
- return ret;
- }
-
- dev_dbg(&client->dev, "WIA %02x %02x\n", wia_val[0], wia_val[1]);
-
- if (wia_val[0] != AK09911_WIA1_VALUE ||
- wia_val[1] != AK09911_WIA2_VALUE) {
- dev_err(&client->dev, "Device ak09911 not found\n");
- return -ENODEV;
- }
-
- return 0;
-}
-
-static int wait_conversion_complete_polled(struct ak09911_data *data)
-{
- struct i2c_client *client = data->client;
- u8 read_status;
- u32 timeout_ms = AK09911_MAX_CONVERSION_TIMEOUT_MS;
- int ret;
-
- /* Wait for the conversion to complete. */
- while (timeout_ms) {
- msleep_interruptible(AK09911_CONVERSION_DONE_POLL_TIME_MS);
- ret = i2c_smbus_read_byte_data(client, AK09911_REG_ST1);
- if (ret < 0) {
- dev_err(&client->dev, "Error in reading ST1\n");
- return ret;
- }
- read_status = ret & 0x01;
- if (read_status)
- break;
- timeout_ms -= AK09911_CONVERSION_DONE_POLL_TIME_MS;
- }
- if (!timeout_ms) {
- dev_err(&client->dev, "Conversion timeout happened\n");
- return -EIO;
- }
-
- return read_status;
-}
-
-static int ak09911_read_axis(struct iio_dev *indio_dev, int index, int *val)
-{
- struct ak09911_data *data = iio_priv(indio_dev);
- struct i2c_client *client = data->client;
- int ret;
-
- mutex_lock(&data->lock);
-
- ret = ak09911_set_mode(client, AK09911_MODE_SNG_MEASURE);
- if (ret < 0)
- goto fn_exit;
-
- ret = wait_conversion_complete_polled(data);
- if (ret < 0)
- goto fn_exit;
-
- /* Read data */
- ret = i2c_smbus_read_word_data(client, ak09911_index_to_reg[index]);
- if (ret < 0) {
- dev_err(&client->dev, "Read axis data fails\n");
- goto fn_exit;
- }
-
- mutex_unlock(&data->lock);
-
- /* Clamp to valid range. */
- *val = sign_extend32(clamp_t(s16, ret, -8192, 8191), 13);
-
- return IIO_VAL_INT;
-
-fn_exit:
- mutex_unlock(&data->lock);
-
- return ret;
-}
-
-static int ak09911_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int *val, int *val2,
- long mask)
-{
- struct ak09911_data *data = iio_priv(indio_dev);
-
- switch (mask) {
- case IIO_CHAN_INFO_RAW:
- return ak09911_read_axis(indio_dev, chan->address, val);
- case IIO_CHAN_INFO_SCALE:
- *val = 0;
- *val2 = data->raw_to_gauss[chan->address];
- return IIO_VAL_INT_PLUS_MICRO;
- }
-
- return -EINVAL;
-}
-
-#define AK09911_CHANNEL(axis, index) \
- { \
- .type = IIO_MAGN, \
- .modified = 1, \
- .channel2 = IIO_MOD_##axis, \
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
- BIT(IIO_CHAN_INFO_SCALE), \
- .address = index, \
- }
-
-static const struct iio_chan_spec ak09911_channels[] = {
- AK09911_CHANNEL(X, 0), AK09911_CHANNEL(Y, 1), AK09911_CHANNEL(Z, 2),
-};
-
-static const struct iio_info ak09911_info = {
- .read_raw = &ak09911_read_raw,
- .driver_module = THIS_MODULE,
-};
-
-static const struct acpi_device_id ak_acpi_match[] = {
- {"AK009911", 0},
- { },
-};
-MODULE_DEVICE_TABLE(acpi, ak_acpi_match);
-
-static int ak09911_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct iio_dev *indio_dev;
- struct ak09911_data *data;
- const char *name;
- int ret;
-
- ret = ak09911_verify_chip_id(client);
- if (ret) {
- dev_err(&client->dev, "AK00911 not detected\n");
- return -ENODEV;
- }
-
- indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
- if (indio_dev == NULL)
- return -ENOMEM;
-
- data = iio_priv(indio_dev);
- i2c_set_clientdata(client, indio_dev);
-
- data->client = client;
- mutex_init(&data->lock);
-
- ret = ak09911_get_asa(client);
- if (ret)
- return ret;
-
- if (id)
- name = id->name;
- else if (ACPI_HANDLE(&client->dev))
- name = dev_name(&client->dev);
- else
- return -ENODEV;
-
- dev_dbg(&client->dev, "Asahi compass chip %s\n", name);
-
- indio_dev->dev.parent = &client->dev;
- indio_dev->channels = ak09911_channels;
- indio_dev->num_channels = ARRAY_SIZE(ak09911_channels);
- indio_dev->info = &ak09911_info;
- indio_dev->modes = INDIO_DIRECT_MODE;
- indio_dev->name = name;
-
- return devm_iio_device_register(&client->dev, indio_dev);
-}
-
-static const struct i2c_device_id ak09911_id[] = {
- {"ak09911", 0},
- {}
-};
-
-MODULE_DEVICE_TABLE(i2c, ak09911_id);
-
-static struct i2c_driver ak09911_driver = {
- .driver = {
- .name = "ak09911",
- .acpi_match_table = ACPI_PTR(ak_acpi_match),
- },
- .probe = ak09911_probe,
- .id_table = ak09911_id,
-};
-module_i2c_driver(ak09911_driver);
-
-MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("AK09911 Compass driver");
#define AK8975_MAX_REGS AK8975_REG_ASAZ
+/*
+ * AK09912 Register definitions
+ */
+#define AK09912_REG_WIA1 0x00
+#define AK09912_REG_WIA2 0x01
+#define AK09912_DEVICE_ID 0x04
+#define AK09911_DEVICE_ID 0x05
+
+#define AK09911_REG_INFO1 0x02
+#define AK09911_REG_INFO2 0x03
+
+#define AK09912_REG_ST1 0x10
+
+#define AK09912_REG_ST1_DRDY_SHIFT 0
+#define AK09912_REG_ST1_DRDY_MASK (1 << AK09912_REG_ST1_DRDY_SHIFT)
+
+#define AK09912_REG_HXL 0x11
+#define AK09912_REG_HXH 0x12
+#define AK09912_REG_HYL 0x13
+#define AK09912_REG_HYH 0x14
+#define AK09912_REG_HZL 0x15
+#define AK09912_REG_HZH 0x16
+#define AK09912_REG_TMPS 0x17
+
+#define AK09912_REG_ST2 0x18
+#define AK09912_REG_ST2_HOFL_SHIFT 3
+#define AK09912_REG_ST2_HOFL_MASK (1 << AK09912_REG_ST2_HOFL_SHIFT)
+
+#define AK09912_REG_CNTL1 0x30
+
+#define AK09912_REG_CNTL2 0x31
+#define AK09912_REG_CNTL_MODE_POWER_DOWN 0x00
+#define AK09912_REG_CNTL_MODE_ONCE 0x01
+#define AK09912_REG_CNTL_MODE_SELF_TEST 0x10
+#define AK09912_REG_CNTL_MODE_FUSE_ROM 0x1F
+#define AK09912_REG_CNTL2_MODE_SHIFT 0
+#define AK09912_REG_CNTL2_MODE_MASK (0x1F << AK09912_REG_CNTL2_MODE_SHIFT)
+
+#define AK09912_REG_CNTL3 0x32
+
+#define AK09912_REG_TS1 0x33
+#define AK09912_REG_TS2 0x34
+#define AK09912_REG_TS3 0x35
+#define AK09912_REG_I2CDIS 0x36
+#define AK09912_REG_TS4 0x37
+
+#define AK09912_REG_ASAX 0x60
+#define AK09912_REG_ASAY 0x61
+#define AK09912_REG_ASAZ 0x62
+
+#define AK09912_MAX_REGS AK09912_REG_ASAZ
+
/*
* Miscellaneous values.
*/
}
/*
- * For AK8963, same calculation, but the device is less sensitive:
+ * For AK8963 and AK09911, same calculation, but the device is less sensitive:
*
* H is in the range of +-8190. The magnetometer has a range of
* +-4912uT. To go from the raw value to uT is:
*
* HuT = H * 4912/8190, or roughly, 6/10, instead of 3/10.
*/
-static long ak8963_raw_to_gauss(u16 data)
+
+static long ak8963_09911_raw_to_gauss(u16 data)
{
return (((long)data + 128) * 6000) / 256;
}
+/*
+ * For AK09912, same calculation, except the device is more sensitive:
+ *
+ * H is in the range of -32752 to 32752. The magnetometer has a range of
+ * +-4912uT. To go from the raw value to uT is:
+ *
+ * HuT = H * 4912/32752, or roughly, 3/20, instead of 3/10.
+ */
+static long ak09912_raw_to_gauss(u16 data)
+{
+ return (((long)data + 128) * 1500) / 256;
+}
+
/* Compatible Asahi Kasei Compass parts */
enum asahi_compass_chipset {
AK8975,
AK8963,
+ AK09911,
+ AK09912,
AK_MAX_TYPE
};
},
{
.type = AK8963,
- .raw_to_gauss = ak8963_raw_to_gauss,
+ .raw_to_gauss = ak8963_09911_raw_to_gauss,
.range = 8190,
.ctrl_regs = {
AK8975_REG_ST1,
AK8975_REG_HYL,
AK8975_REG_HZL},
},
+ {
+ .type = AK09911,
+ .raw_to_gauss = ak8963_09911_raw_to_gauss,
+ .range = 8192,
+ .ctrl_regs = {
+ AK09912_REG_ST1,
+ AK09912_REG_ST2,
+ AK09912_REG_CNTL2,
+ AK09912_REG_ASAX,
+ AK09912_MAX_REGS},
+ .ctrl_masks = {
+ AK09912_REG_ST1_DRDY_MASK,
+ AK09912_REG_ST2_HOFL_MASK,
+ 0,
+ AK09912_REG_CNTL2_MODE_MASK},
+ .ctrl_modes = {
+ AK09912_REG_CNTL_MODE_POWER_DOWN,
+ AK09912_REG_CNTL_MODE_ONCE,
+ AK09912_REG_CNTL_MODE_SELF_TEST,
+ AK09912_REG_CNTL_MODE_FUSE_ROM},
+ .data_regs = {
+ AK09912_REG_HXL,
+ AK09912_REG_HYL,
+ AK09912_REG_HZL},
+ },
+ {
+ .type = AK09912,
+ .raw_to_gauss = ak09912_raw_to_gauss,
+ .range = 32752,
+ .ctrl_regs = {
+ AK09912_REG_ST1,
+ AK09912_REG_ST2,
+ AK09912_REG_CNTL2,
+ AK09912_REG_ASAX,
+ AK09912_MAX_REGS},
+ .ctrl_masks = {
+ AK09912_REG_ST1_DRDY_MASK,
+ AK09912_REG_ST2_HOFL_MASK,
+ 0,
+ AK09912_REG_CNTL2_MODE_MASK},
+ .ctrl_modes = {
+ AK09912_REG_CNTL_MODE_POWER_DOWN,
+ AK09912_REG_CNTL_MODE_ONCE,
+ AK09912_REG_CNTL_MODE_SELF_TEST,
+ AK09912_REG_CNTL_MODE_FUSE_ROM},
+ .data_regs = {
+ AK09912_REG_HXL,
+ AK09912_REG_HYL,
+ AK09912_REG_HZL},
+ }
};
/*
u8 cntl_cache;
};
+/*
+ * Return 0 if the i2c device is the one we expect.
+ * return a negative error number otherwise
+ */
+static int ak8975_who_i_am(struct i2c_client *client,
+ enum asahi_compass_chipset type)
+{
+ u8 wia_val[2];
+ int ret;
+
+ /*
+ * Signature for each device:
+ * Device | WIA1 | WIA2
+ * AK09912 | DEVICE_ID | AK09912_DEVICE_ID
+ * AK09911 | DEVICE_ID | AK09911_DEVICE_ID
+ * AK8975 | DEVICE_ID | NA
+ * AK8963 | DEVICE_ID | NA
+ */
+ ret = i2c_smbus_read_i2c_block_data(client, AK09912_REG_WIA1,
+ 2, wia_val);
+ if (ret < 0) {
+ dev_err(&client->dev, "Error reading WIA\n");
+ return ret;
+ }
+
+ if (wia_val[0] != AK8975_DEVICE_ID)
+ return -ENODEV;
+
+ switch (type) {
+ case AK8975:
+ case AK8963:
+ return 0;
+ case AK09911:
+ if (wia_val[1] == AK09911_DEVICE_ID)
+ return 0;
+ break;
+ case AK09912:
+ if (wia_val[1] == AK09912_DEVICE_ID)
+ return 0;
+ break;
+ default:
+ dev_err(&client->dev, "Type %d unknown\n", type);
+ }
+ return -ENODEV;
+}
+
/*
* Helper function to write to CNTL register.
*/
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct ak8975_data *data = iio_priv(indio_dev);
- u8 device_id;
int ret;
- /* Confirm that the device we're talking to is really an AK8975. */
- ret = i2c_smbus_read_byte_data(client, AK8975_REG_WIA);
- if (ret < 0) {
- dev_err(&client->dev, "Error reading WIA\n");
- return ret;
- }
- device_id = ret;
- if (device_id != AK8975_DEVICE_ID) {
- dev_err(&client->dev, "Device ak8975 not found\n");
- return -ENODEV;
- }
-
/* Write the fused rom access mode. */
ret = ak8975_set_mode(data, FUSE_ROM);
if (ret < 0) {
{"AK8975", AK8975},
{"AK8963", AK8963},
{"INVN6500", AK8963},
+ {"AK09911", AK09911},
+ {"AK09912", AK09912},
{ },
};
MODULE_DEVICE_TABLE(acpi, ak_acpi_match);
}
data->def = &ak_def_array[chipset];
+ err = ak8975_who_i_am(client, data->def->type);
+ if (err < 0) {
+ dev_err(&client->dev, "Unexpected device\n");
+ return err;
+ }
dev_dbg(&client->dev, "Asahi compass chip %s\n", name);
/* Perform some basic start-of-day setup of the device. */
static const struct i2c_device_id ak8975_id[] = {
{"ak8975", AK8975},
{"ak8963", AK8963},
+ {"ak09911", AK09911},
+ {"ak09912", AK09912},
{}
};
{ .compatible = "ak8975", },
{ .compatible = "asahi-kasei,ak8963", },
{ .compatible = "ak8963", },
+ { .compatible = "asahi-kasei,ak09911", },
+ { .compatible = "ak09911", },
+ { .compatible = "asahi-kasei,ak09912", },
+ { .compatible = "ak09912", },
{}
};
MODULE_DEVICE_TABLE(of, ak8975_of_match);
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff