net: thunderx: Add 81xx support to BGX driver

This patch adds support for BGX module on 81xx where a BGX
can be split and have different LMACs configured in
different modes.

Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
index 44974270093d34f7fae1f80be8320d0977f89f6d..9c3c273f45351555870b0d7eb50288e5784d8f45 100644 (file)
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
@@ -50,6 +50,7 @@ struct bgx {
        int                     lmac_count;
        void __iomem            *reg_base;
        struct pci_dev          *pdev;
+       bool                    is_81xx;
 };
 
 static struct bgx *bgx_vnic[MAX_BGX_THUNDER];
@@ -803,9 +804,17 @@ static void bgx_print_qlm_mode(struct bgx *bgx, u8 lmacid)
        struct device *dev = &bgx->pdev->dev;
        struct lmac *lmac;
        char str[20];
+       u8 dlm;
+
+       if (lmacid > MAX_LMAC_PER_BGX)
+               return;
 
        lmac = &bgx->lmac[lmacid];
-       sprintf(str, "BGX%d QLM mode", bgx->bgx_id);
+       dlm = (lmacid / 2) + (bgx->bgx_id * 2);
+       if (!bgx->is_81xx)
+               sprintf(str, "BGX%d QLM mode", bgx->bgx_id);
+       else
+               sprintf(str, "BGX%d DLM%d mode", bgx->bgx_id, dlm);
 
        switch (lmac->lmac_type) {
        case BGX_MODE_SGMII:
@@ -857,26 +866,81 @@ static void lmac_set_lane2sds(struct lmac *lmac)
 static void bgx_set_lmac_config(struct bgx *bgx, u8 idx)
 {
        struct lmac *lmac;
+       struct lmac *olmac;
        u64 cmr_cfg;
+       u8 lmac_type;
+       u8 lane_to_sds;
 
        lmac = &bgx->lmac[idx];
-       lmac->lmacid = idx;
 
-       /* Read LMAC0 type to figure out QLM mode
-        * This is configured by low level firmware
+       if (!bgx->is_81xx) {
+               /* Read LMAC0 type to figure out QLM mode
+                * This is configured by low level firmware
+                */
+               cmr_cfg = bgx_reg_read(bgx, 0, BGX_CMRX_CFG);
+               lmac->lmac_type = (cmr_cfg >> 8) & 0x07;
+               lmac->use_training =
+                       bgx_reg_read(bgx, 0, BGX_SPUX_BR_PMD_CRTL) &
+                               SPU_PMD_CRTL_TRAIN_EN;
+               lmac_set_lane2sds(lmac);
+               return;
+       }
+
+       /* On 81xx BGX can be split across 2 DLMs
+        * firmware programs lmac_type of LMAC0 and LMAC2
         */
-       cmr_cfg = bgx_reg_read(bgx, 0, BGX_CMRX_CFG);
-       lmac->lmac_type = (cmr_cfg >> 8) & 0x07;
-       lmac->use_training =
-               bgx_reg_read(bgx, 0, BGX_SPUX_BR_PMD_CRTL) &
+       if ((idx == 0) || (idx == 2)) {
+               cmr_cfg = bgx_reg_read(bgx, idx, BGX_CMRX_CFG);
+               lmac_type = (u8)((cmr_cfg >> 8) & 0x07);
+               lane_to_sds = (u8)(cmr_cfg & 0xFF);
+               /* Check if config is not reset value */
+               if ((lmac_type == 0) && (lane_to_sds == 0xE4))
+                       lmac->lmac_type = BGX_MODE_INVALID;
+               else
+                       lmac->lmac_type = lmac_type;
+               lmac->use_training =
+                       bgx_reg_read(bgx, idx, BGX_SPUX_BR_PMD_CRTL) &
+                               SPU_PMD_CRTL_TRAIN_EN;
+               lmac_set_lane2sds(lmac);
+
+               /* Set LMAC type of other lmac on same DLM i.e LMAC 1/3 */
+               olmac = &bgx->lmac[idx + 1];
+               olmac->lmac_type = lmac->lmac_type;
+               olmac->use_training =
+               bgx_reg_read(bgx, idx + 1, BGX_SPUX_BR_PMD_CRTL) &
                        SPU_PMD_CRTL_TRAIN_EN;
-       lmac_set_lane2sds(lmac);
+               lmac_set_lane2sds(olmac);
+       }
+}
+
+static bool is_dlm0_in_bgx_mode(struct bgx *bgx)
+{
+       struct lmac *lmac;
+
+       if (!bgx->is_81xx)
+               return true;
+
+       lmac = &bgx->lmac[1];
+       if (lmac->lmac_type == BGX_MODE_INVALID)
+               return false;
+
+       return true;
 }
 
 static void bgx_get_qlm_mode(struct bgx *bgx)
 {
+       struct lmac *lmac;
+       struct lmac *lmac01;
+       struct lmac *lmac23;
        u8  idx;
 
+       /* Init all LMAC's type to invalid */
+       for (idx = 0; idx < MAX_LMAC_PER_BGX; idx++) {
+               lmac = &bgx->lmac[idx];
+               lmac->lmac_type = BGX_MODE_INVALID;
+               lmac->lmacid = idx;
+       }
+
        /* It is assumed that low level firmware sets this value */
        bgx->lmac_count = bgx_reg_read(bgx, 0, BGX_CMR_RX_LMACS) & 0x7;
        if (bgx->lmac_count > MAX_LMAC_PER_BGX)
@@ -884,7 +948,28 @@ static void bgx_get_qlm_mode(struct bgx *bgx)
 
        for (idx = 0; idx < bgx->lmac_count; idx++)
                bgx_set_lmac_config(bgx, idx);
-       bgx_print_qlm_mode(bgx, 0);
+
+       if (!bgx->is_81xx) {
+               bgx_print_qlm_mode(bgx, 0);
+               return;
+       }
+
+       if (bgx->lmac_count) {
+               bgx_print_qlm_mode(bgx, 0);
+               bgx_print_qlm_mode(bgx, 2);
+       }
+
+       /* If DLM0 is not in BGX mode then LMAC0/1 have
+        * to be configured with serdes lanes of DLM1
+        */
+       if (is_dlm0_in_bgx_mode(bgx) || (bgx->lmac_count > 2))
+               return;
+       for (idx = 0; idx < bgx->lmac_count; idx++) {
+               lmac01 = &bgx->lmac[idx];
+               lmac23 = &bgx->lmac[idx + 2];
+               lmac01->lmac_type = lmac23->lmac_type;
+               lmac01->lane_to_sds = lmac23->lane_to_sds;
+       }
 }
 
 #ifdef CONFIG_ACPI
@@ -1059,6 +1144,7 @@ static int bgx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
        struct device *dev = &pdev->dev;
        struct bgx *bgx = NULL;
        u8 lmac;
+       u16 sdevid;
 
        bgx = devm_kzalloc(dev, sizeof(*bgx), GFP_KERNEL);
        if (!bgx)
@@ -1080,6 +1166,10 @@ static int bgx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
                goto err_disable_device;
        }
 
+       pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &sdevid);
+       if (sdevid == PCI_SUBSYS_DEVID_81XX_BGX)
+               bgx->is_81xx = true;
+
        /* MAP configuration registers */
        bgx->reg_base = pcim_iomap(pdev, PCI_CFG_REG_BAR_NUM, 0);
        if (!bgx->reg_base) {
@@ -1105,6 +1195,8 @@ static int bgx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
                if (err) {
                        dev_err(dev, "BGX%d failed to enable lmac%d\n",
                                bgx->bgx_id, lmac);
+                       while (lmac)
+                               bgx_lmac_disable(bgx, --lmac);
                        goto err_enable;
                }
        }

diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h
index b7b91c857dbabe05e1bfc10fa110d124200b2be6..38e9fb4ae8c4a61857bbedb6aeb49d9a773497ff 100644 (file)
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h
@@ -9,6 +9,14 @@
 #ifndef THUNDER_BGX_H
 #define THUNDER_BGX_H
 
+/* PCI device ID */
+#define        PCI_DEVICE_ID_THUNDER_BGX               0xA026
+
+/* Subsystem device IDs */
+#define PCI_SUBSYS_DEVID_88XX_BGX              0xA126
+#define PCI_SUBSYS_DEVID_81XX_BGX              0xA226
+#define PCI_SUBSYS_DEVID_83XX_BGX              0xA326
+
 #define    MAX_BGX_THUNDER                     8 /* Max 4 nodes, 2 per node */
 #define    MAX_BGX_PER_CN88XX                  2
 #define    MAX_BGX_PER_CN81XX                  2
@@ -215,6 +223,9 @@ enum LMAC_TYPE {
        BGX_MODE_XLAUI = 4, /* 4 lanes, 10.3125 Gbaud */
        BGX_MODE_10G_KR = 3,/* 1 lane, 10.3125 Gbaud */
        BGX_MODE_40G_KR = 4,/* 4 lanes, 10.3125 Gbaud */
+       BGX_MODE_RGMII = 5,
+       BGX_MODE_QSGMII = 6,
+       BGX_MODE_INVALID = 7,
 };
 
 #endif /* THUNDER_BGX_H */