[media] V4L: mx3_camera: convert to the new mbus-config subdev operations
authorGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Wed, 27 Jul 2011 19:00:29 +0000 (16:00 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Thu, 3 Nov 2011 20:27:46 +0000 (18:27 -0200)
Switch from soc-camera specific .{query,set}_bus_param() to V4L2
subdevice .[gs]_mbus_config() operations.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/mx3_camera.c

index c8e958a07e91f6e4a4d22d10c8c29c86cfe05177..f4ef6b993ff14e006e5be026b87ccc4c8be23887 100644 (file)
@@ -109,6 +109,7 @@ struct mx3_camera_dev {
 
        unsigned long           platform_flags;
        unsigned long           mclk;
+       u16                     width_flags;    /* max 15 bits */
 
        struct list_head        capture;
        spinlock_t              lock;           /* Protects video buffer lists */
@@ -547,59 +548,28 @@ static void mx3_camera_remove_device(struct soc_camera_device *icd)
 static int test_platform_param(struct mx3_camera_dev *mx3_cam,
                               unsigned char buswidth, unsigned long *flags)
 {
+       /*
+        * If requested data width is supported by the platform, use it or any
+        * possible lower value - i.MX31 is smart enough to shift bits
+        */
+       if (buswidth > fls(mx3_cam->width_flags))
+               return -EINVAL;
+
        /*
         * Platform specified synchronization and pixel clock polarities are
         * only a recommendation and are only used during probing. MX3x
         * camera interface only works in master mode, i.e., uses HSYNC and
         * VSYNC signals from the sensor
         */
-       *flags = SOCAM_MASTER |
-               SOCAM_HSYNC_ACTIVE_HIGH |
-               SOCAM_HSYNC_ACTIVE_LOW |
-               SOCAM_VSYNC_ACTIVE_HIGH |
-               SOCAM_VSYNC_ACTIVE_LOW |
-               SOCAM_PCLK_SAMPLE_RISING |
-               SOCAM_PCLK_SAMPLE_FALLING |
-               SOCAM_DATA_ACTIVE_HIGH |
-               SOCAM_DATA_ACTIVE_LOW;
-
-       /*
-        * If requested data width is supported by the platform, use it or any
-        * possible lower value - i.MX31 is smart enough to schift bits
-        */
-       if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_15)
-               *flags |= SOCAM_DATAWIDTH_15 | SOCAM_DATAWIDTH_10 |
-                       SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_4;
-       else if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_10)
-               *flags |= SOCAM_DATAWIDTH_10 | SOCAM_DATAWIDTH_8 |
-                       SOCAM_DATAWIDTH_4;
-       else if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_8)
-               *flags |= SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_4;
-       else if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_4)
-               *flags |= SOCAM_DATAWIDTH_4;
-
-       switch (buswidth) {
-       case 15:
-               if (!(*flags & SOCAM_DATAWIDTH_15))
-                       return -EINVAL;
-               break;
-       case 10:
-               if (!(*flags & SOCAM_DATAWIDTH_10))
-                       return -EINVAL;
-               break;
-       case 8:
-               if (!(*flags & SOCAM_DATAWIDTH_8))
-                       return -EINVAL;
-               break;
-       case 4:
-               if (!(*flags & SOCAM_DATAWIDTH_4))
-                       return -EINVAL;
-               break;
-       default:
-               dev_warn(mx3_cam->soc_host.v4l2_dev.dev,
-                        "Unsupported bus width %d\n", buswidth);
-               return -EINVAL;
-       }
+       *flags = V4L2_MBUS_MASTER |
+               V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+               V4L2_MBUS_HSYNC_ACTIVE_LOW |
+               V4L2_MBUS_VSYNC_ACTIVE_HIGH |
+               V4L2_MBUS_VSYNC_ACTIVE_LOW |
+               V4L2_MBUS_PCLK_SAMPLE_RISING |
+               V4L2_MBUS_PCLK_SAMPLE_FALLING |
+               V4L2_MBUS_DATA_ACTIVE_HIGH |
+               V4L2_MBUS_DATA_ACTIVE_LOW;
 
        return 0;
 }
@@ -607,9 +577,11 @@ static int test_platform_param(struct mx3_camera_dev *mx3_cam,
 static int mx3_camera_try_bus_param(struct soc_camera_device *icd,
                                    const unsigned int depth)
 {
+       struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
        struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
        struct mx3_camera_dev *mx3_cam = ici->priv;
-       unsigned long bus_flags, camera_flags;
+       struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+       unsigned long bus_flags, common_flags;
        int ret = test_platform_param(mx3_cam, depth, &bus_flags);
 
        dev_dbg(icd->parent, "request bus width %d bit: %d\n", depth, ret);
@@ -617,15 +589,21 @@ static int mx3_camera_try_bus_param(struct soc_camera_device *icd,
        if (ret < 0)
                return ret;
 
-       camera_flags = icd->ops->query_bus_param(icd);
-
-       ret = soc_camera_bus_param_compatible(camera_flags, bus_flags);
-       if (ret < 0)
-               dev_warn(icd->parent,
-                        "Flags incompatible: camera %lx, host %lx\n",
-                        camera_flags, bus_flags);
+       ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+       if (!ret) {
+               common_flags = soc_mbus_config_compatible(&cfg,
+                                                         bus_flags);
+               if (!common_flags) {
+                       dev_warn(icd->parent,
+                                "Flags incompatible: camera 0x%x, host 0x%lx\n",
+                                cfg.flags, bus_flags);
+                       return -EINVAL;
+               }
+       } else if (ret != -ENOIOCTLCMD) {
+               return ret;
+       }
 
-       return ret;
+       return 0;
 }
 
 static bool chan_filter(struct dma_chan *chan, void *arg)
@@ -994,9 +972,11 @@ static int mx3_camera_querycap(struct soc_camera_host *ici,
 
 static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 {
+       struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
        struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
        struct mx3_camera_dev *mx3_cam = ici->priv;
-       unsigned long bus_flags, camera_flags, common_flags;
+       struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+       unsigned long bus_flags, common_flags;
        u32 dw, sens_conf;
        const struct soc_mbus_pixelfmt *fmt;
        int buswidth;
@@ -1008,83 +988,76 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
        if (!fmt)
                return -EINVAL;
 
-       buswidth = fmt->bits_per_sample;
-       ret = test_platform_param(mx3_cam, buswidth, &bus_flags);
-
        xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
        if (!xlate) {
                dev_warn(dev, "Format %x not found\n", pixfmt);
                return -EINVAL;
        }
 
+       buswidth = fmt->bits_per_sample;
+       ret = test_platform_param(mx3_cam, buswidth, &bus_flags);
+
        dev_dbg(dev, "requested bus width %d bit: %d\n", buswidth, ret);
 
        if (ret < 0)
                return ret;
 
-       camera_flags = icd->ops->query_bus_param(icd);
-
-       common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags);
-       dev_dbg(dev, "Flags cam: 0x%lx host: 0x%lx common: 0x%lx\n",
-               camera_flags, bus_flags, common_flags);
-       if (!common_flags) {
-               dev_dbg(dev, "no common flags");
-               return -EINVAL;
+       ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+       if (!ret) {
+               common_flags = soc_mbus_config_compatible(&cfg,
+                                                         bus_flags);
+               if (!common_flags) {
+                       dev_warn(icd->parent,
+                                "Flags incompatible: camera 0x%x, host 0x%lx\n",
+                                cfg.flags, bus_flags);
+                       return -EINVAL;
+               }
+       } else if (ret != -ENOIOCTLCMD) {
+               return ret;
+       } else {
+               common_flags = bus_flags;
        }
 
+       dev_dbg(dev, "Flags cam: 0x%x host: 0x%lx common: 0x%lx\n",
+               cfg.flags, bus_flags, common_flags);
+
        /* Make choices, based on platform preferences */
-       if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
-           (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
+       if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
+           (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
                if (mx3_cam->platform_flags & MX3_CAMERA_HSP)
-                       common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
+                       common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH;
                else
-                       common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
+                       common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW;
        }
 
-       if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
-           (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
+       if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
+           (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
                if (mx3_cam->platform_flags & MX3_CAMERA_VSP)
-                       common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
+                       common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
                else
-                       common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
+                       common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
        }
 
-       if ((common_flags & SOCAM_DATA_ACTIVE_HIGH) &&
-           (common_flags & SOCAM_DATA_ACTIVE_LOW)) {
+       if ((common_flags & V4L2_MBUS_DATA_ACTIVE_HIGH) &&
+           (common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)) {
                if (mx3_cam->platform_flags & MX3_CAMERA_DP)
-                       common_flags &= ~SOCAM_DATA_ACTIVE_HIGH;
+                       common_flags &= ~V4L2_MBUS_DATA_ACTIVE_HIGH;
                else
-                       common_flags &= ~SOCAM_DATA_ACTIVE_LOW;
+                       common_flags &= ~V4L2_MBUS_DATA_ACTIVE_LOW;
        }
 
-       if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
-           (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
+       if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
+           (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
                if (mx3_cam->platform_flags & MX3_CAMERA_PCP)
-                       common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+                       common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
                else
-                       common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
+                       common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
        }
 
-       /*
-        * Make the camera work in widest common mode, we'll take care of
-        * the rest
-        */
-       if (common_flags & SOCAM_DATAWIDTH_15)
-               common_flags = (common_flags & ~SOCAM_DATAWIDTH_MASK) |
-                       SOCAM_DATAWIDTH_15;
-       else if (common_flags & SOCAM_DATAWIDTH_10)
-               common_flags = (common_flags & ~SOCAM_DATAWIDTH_MASK) |
-                       SOCAM_DATAWIDTH_10;
-       else if (common_flags & SOCAM_DATAWIDTH_8)
-               common_flags = (common_flags & ~SOCAM_DATAWIDTH_MASK) |
-                       SOCAM_DATAWIDTH_8;
-       else
-               common_flags = (common_flags & ~SOCAM_DATAWIDTH_MASK) |
-                       SOCAM_DATAWIDTH_4;
-
-       ret = icd->ops->set_bus_param(icd, common_flags);
-       if (ret < 0) {
-               dev_dbg(dev, "camera set_bus_param(%lx) returned %d\n",
+       cfg.flags = common_flags;
+       ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
+       if (ret < 0 && ret != -ENOIOCTLCMD) {
+               dev_dbg(dev, "camera s_mbus_config(0x%lx) returned %d\n",
                        common_flags, ret);
                return ret;
        }
@@ -1108,13 +1081,13 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
        /* This has been set in mx3_camera_activate(), but we clear it above */
        sens_conf |= CSI_SENS_CONF_DATA_FMT_BAYER;
 
-       if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
+       if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
                sens_conf |= 1 << CSI_SENS_CONF_PIX_CLK_POL_SHIFT;
-       if (common_flags & SOCAM_HSYNC_ACTIVE_LOW)
+       if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
                sens_conf |= 1 << CSI_SENS_CONF_HSYNC_POL_SHIFT;
-       if (common_flags & SOCAM_VSYNC_ACTIVE_LOW)
+       if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
                sens_conf |= 1 << CSI_SENS_CONF_VSYNC_POL_SHIFT;
-       if (common_flags & SOCAM_DATA_ACTIVE_LOW)
+       if (common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)
                sens_conf |= 1 << CSI_SENS_CONF_DATA_POL_SHIFT;
 
        /* Just do what we're asked to do */
@@ -1199,6 +1172,14 @@ static int __devinit mx3_camera_probe(struct platform_device *pdev)
                         "data widths, using default 8 bit\n");
                mx3_cam->platform_flags |= MX3_CAMERA_DATAWIDTH_8;
        }
+       if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_4)
+               mx3_cam->width_flags = 1 << 3;
+       if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_8)
+               mx3_cam->width_flags |= 1 << 7;
+       if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_10)
+               mx3_cam->width_flags |= 1 << 9;
+       if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_15)
+               mx3_cam->width_flags |= 1 << 14;
 
        mx3_cam->mclk = mx3_cam->pdata->mclk_10khz * 10000;
        if (!mx3_cam->mclk) {