Input: pmic8xxx-pwrkey - migrate to DT

The driver is only supported on DT enabled platforms. Convert the
driver to DT so that it can probe properly.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt
new file mode 100644 (file)
index 0000000..588536c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt
@@ -0,0 +1,46 @@
+Qualcomm PM8xxx PMIC Power Key
+
+PROPERTIES
+
+- compatible:
+       Usage: required
+       Value type: <string>
+       Definition: must be one of:
+                   "qcom,pm8058-pwrkey"
+                   "qcom,pm8921-pwrkey"
+
+- reg:
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: address of power key control register
+
+- interrupts:
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: the first interrupt specifies the key release interrupt
+                   and the second interrupt specifies the key press interrupt.
+                   The format of the specifier is defined by the binding
+                   document describing the node's interrupt parent.
+
+- debounce:
+       Usage: optional
+       Value type: <u32>
+       Definition: time in microseconds that key must be pressed or release
+                   for state change interrupt to trigger.
+
+- pull-up:
+       Usage: optional
+       Value type: <empty>
+       Definition: presence of this property indicates that the KPDPWR_N pin
+                   should be configured for pull up.
+
+EXAMPLE
+
+       pwrkey@1c {
+               compatible = "qcom,pm8921-pwrkey";
+               reg = <0x1c>;
+               interrupt-parent = <&pmicintc>;
+               interrupts = <50 1>, <51 1>;
+               debounce = <15625>;
+               pull-up;
+       };

diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c
index 0e1a05f9585804cf4a987dd0bd34d50deb68722a..1cb8fda7a166593ce1799a53e38595ef8e7bcfca 100644 (file)
--- a/drivers/input/misc/pmic8xxx-pwrkey.c
+++ b/drivers/input/misc/pmic8xxx-pwrkey.c
@@ -19,8 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/log2.h>
-
-#include <linux/input/pmic8xxx-pwrkey.h>
+#include <linux/of.h>
 
 #define PON_CNTL_1 0x1C
 #define PON_CNTL_PULL_UP BIT(7)
@@ -89,15 +88,15 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
        unsigned int pon_cntl;
        struct regmap *regmap;
        struct pmic8xxx_pwrkey *pwrkey;
-       const struct pm8xxx_pwrkey_platform_data *pdata =
-                                       dev_get_platdata(&pdev->dev);
+       u32 kpd_delay;
+       bool pull_up;
 
-       if (!pdata) {
-               dev_err(&pdev->dev, "power key platform data not supplied\n");
-               return -EINVAL;
-       }
+       if (of_property_read_u32(pdev->dev.of_node, "debounce", &kpd_delay))
+               kpd_delay = 0;
 
-       if (pdata->kpd_trigger_delay_us > 62500) {
+       pull_up = of_property_read_bool(pdev->dev.of_node, "pull-up");
+
+       if (kpd_delay > 62500) {
                dev_err(&pdev->dev, "invalid power key trigger delay\n");
                return -EINVAL;
        }
@@ -125,7 +124,7 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
        pwr->name = "pmic8xxx_pwrkey";
        pwr->phys = "pmic8xxx_pwrkey/input0";
 
-       delay = (pdata->kpd_trigger_delay_us << 10) / USEC_PER_SEC;
+       delay = (kpd_delay << 10) / USEC_PER_SEC;
        delay = 1 + ilog2(delay);
 
        err = regmap_read(regmap, PON_CNTL_1, &pon_cntl);
@@ -136,7 +135,7 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
 
        pon_cntl &= ~PON_CNTL_TRIG_DELAY_MASK;
        pon_cntl |= (delay & PON_CNTL_TRIG_DELAY_MASK);
-       if (pdata->pull_up)
+       if (pull_up)
                pon_cntl |= PON_CNTL_PULL_UP;
        else
                pon_cntl &= ~PON_CNTL_PULL_UP;
@@ -172,7 +171,7 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
        }
 
        platform_set_drvdata(pdev, pwrkey);
-       device_init_wakeup(&pdev->dev, pdata->wakeup);
+       device_init_wakeup(&pdev->dev, 1);
 
        return 0;
 }
@@ -184,13 +183,21 @@ static int pmic8xxx_pwrkey_remove(struct platform_device *pdev)
        return 0;
 }
 
+static const struct of_device_id pm8xxx_pwr_key_id_table[] = {
+       { .compatible = "qcom,pm8058-pwrkey" },
+       { .compatible = "qcom,pm8921-pwrkey" },
+       { }
+};
+MODULE_DEVICE_TABLE(of, pm8xxx_pwr_key_id_table);
+
 static struct platform_driver pmic8xxx_pwrkey_driver = {
        .probe          = pmic8xxx_pwrkey_probe,
        .remove         = pmic8xxx_pwrkey_remove,
        .driver         = {
-               .name   = PM8XXX_PWRKEY_DEV_NAME,
+               .name   = "pm8xxx-pwrkey",
                .owner  = THIS_MODULE,
                .pm     = &pm8xxx_pwr_key_pm_ops,
+               .of_match_table = pm8xxx_pwr_key_id_table,
        },
 };
 module_platform_driver(pmic8xxx_pwrkey_driver);

diff --git a/include/linux/input/pmic8xxx-pwrkey.h b/include/linux/input/pmic8xxx-pwrkey.h
deleted file mode 100644 (file)
index 6d2974e..0000000
--- a/include/linux/input/pmic8xxx-pwrkey.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __PMIC8XXX_PWRKEY_H__
-#define __PMIC8XXX_PWRKEY_H__
-
-#define PM8XXX_PWRKEY_DEV_NAME "pm8xxx-pwrkey"
-
-/**
- * struct pm8xxx_pwrkey_platform_data - platform data for pwrkey driver
- * @pull up:  power on register control for pull up/down configuration
- * @kpd_trigger_delay_us: time delay for power key state change interrupt
- *                  trigger.
- * @wakeup: configure power key as wakeup source
- */
-struct pm8xxx_pwrkey_platform_data  {
-       bool pull_up;
-       u32  kpd_trigger_delay_us;
-       u32  wakeup;
-};
-
-#endif /* __PMIC8XXX_PWRKEY_H__ */