8250_pci: coding style
authorAlan Cox <alan@lxorguk.ukuu.org.uk>
Fri, 8 Feb 2008 12:18:51 +0000 (04:18 -0800)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Fri, 8 Feb 2008 17:22:25 +0000 (09:22 -0800)
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/serial/8250_pci.c

index 0a4ac2b6eb5a2a8d5c0a25da3a1a0bdf40c4f317..a8bec498cad6f8dddd323dd7a3df9b8e7b1a65ac 100644 (file)
@@ -140,7 +140,7 @@ afavlab_setup(struct serial_private *priv, struct pciserial_board *board,
              struct uart_port *port, int idx)
 {
        unsigned int bar, offset = board->first_offset;
-       
+
        bar = FL_GET_BASE(board->flags);
        if (idx < 4)
                bar += idx;
@@ -227,8 +227,8 @@ static int pci_inteli960ni_init(struct pci_dev *dev)
                return -ENODEV;
 
        /* is firmware started? */
-       pci_read_config_dword(dev, 0x44, (void*) &oldval); 
-       if (oldval == 0x00001000L) { /* RESET value */ 
+       pci_read_config_dword(dev, 0x44, (void *)&oldval);
+       if (oldval == 0x00001000L) { /* RESET value */
                printk(KERN_DEBUG "Local i960 firmware missing");
                return -ENODEV;
        }
@@ -253,11 +253,11 @@ static int pci_plx9050_init(struct pci_dev *dev)
 
        irq_config = 0x41;
        if (dev->vendor == PCI_VENDOR_ID_PANACOM ||
-           dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) {
+           dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS)
                irq_config = 0x43;
-       }
+
        if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
-           (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) {
+           (dev->device == PCI_DEVICE_ID_PLX_ROMULUS))
                /*
                 * As the megawolf cards have the int pins active
                 * high, and have 2 UART chips, both ints must be
@@ -267,8 +267,6 @@ static int pci_plx9050_init(struct pci_dev *dev)
                 * deep FIFOs
                 */
                irq_config = 0x5b;
-       }
-
        /*
         * enable/disable interrupts
         */
@@ -343,14 +341,14 @@ static int sbs_init(struct pci_dev *dev)
 {
        u8 __iomem *p;
 
-       p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0));
+       p = ioremap(pci_resource_start(dev, 0), pci_resource_len(dev, 0));
 
        if (p == NULL)
                return -ENOMEM;
        /* Set bit-4 Control Register (UART RESET) in to reset the uarts */
-       writeb(0x10,p + OCT_REG_CR_OFF);
+       writeb(0x10, p + OCT_REG_CR_OFF);
        udelay(50);
-       writeb(0x0,p + OCT_REG_CR_OFF);
+       writeb(0x0, p + OCT_REG_CR_OFF);
 
        /* Set bit-2 (INTENABLE) of Control Register */
        writeb(0x4, p + OCT_REG_CR_OFF);
@@ -367,10 +365,10 @@ static void __devexit sbs_exit(struct pci_dev *dev)
 {
        u8 __iomem *p;
 
-       p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0));
-       if (p != NULL) {
+       p = ioremap(pci_resource_start(dev, 0), pci_resource_len(dev, 0));
+       /* FIXME: What if resource_len < OCT_REG_CR_OFF */
+       if (p != NULL)
                writeb(0, p + OCT_REG_CR_OFF);
-       }
        iounmap(p);
 }
 
@@ -386,7 +384,7 @@ static void __devexit sbs_exit(struct pci_dev *dev)
  * with other OSes (like M$ DOS).
  *
  *  SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999
- * 
+ *
  * There is two family of SIIG serial cards with different PCI
  * interface chip and different configuration methods:
  *     - 10x cards have control registers in IO and/or memory space;
@@ -489,21 +487,21 @@ static const unsigned short timedia_single_port[] = {
 
 static const unsigned short timedia_dual_port[] = {
        0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
-       0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, 
-       0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, 
+       0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
+       0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
        0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
        0xD079, 0
 };
 
 static const unsigned short timedia_quad_port[] = {
-       0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, 
-       0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, 
+       0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
+       0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
        0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
        0xB157, 0
 };
 
 static const unsigned short timedia_eight_port[] = {
-       0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, 
+       0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
        0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
 };
 
@@ -656,7 +654,8 @@ static int pci_ite887x_init(struct pci_dev *dev)
                                ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
                                ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]);
                        /* write INTCBAR - ioport */
-                       pci_write_config_dword(dev, ITE_887x_INTCBAR, inta_addr[i]);
+                       pci_write_config_dword(dev, ITE_887x_INTCBAR,
+                                                               inta_addr[i]);
                        ret = inb(inta_addr[i]);
                        if (ret != 0xff) {
                                /* ioport connected */
@@ -755,7 +754,7 @@ pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
 
        if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
                return 1;
-                       
+
        return setup_port(priv, port, bar, offset, board->reg_shift);
 }
 
@@ -843,7 +842,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
                .init           = pci_plx9050_init,
                .setup          = pci_default_setup,
                .exit           = __devexit_p(pci_plx9050_exit),
-       },              
+       },
        {
                .vendor         = PCI_VENDOR_ID_PANACOM,
                .device         = PCI_DEVICE_ID_PANACOM_DUALMODEM,
@@ -1032,7 +1031,7 @@ static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
                    quirk_id_matches(quirk->device, dev->device) &&
                    quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
                    quirk_id_matches(quirk->subdevice, dev->subsystem_device))
-                       break;
+                       break;
        return quirk;
 }
 
@@ -1711,7 +1710,7 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 };
 
 static const struct pci_device_id softmodem_blacklist[] = {
-       { PCI_VDEVICE ( AL, 0x5457 ), }, /* ALi Corporation M5457 AC'97 Modem */
+       { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
 };
 
 /*
@@ -1724,13 +1723,13 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
 {
        const struct pci_device_id *blacklist;
        int num_iomem, num_port, first_port = -1, i;
-       
+
        /*
         * If it is not a communications device or the programming
         * interface is greater than 6, give up.
         *
         * (Should we try to make guesses for multiport serial devices
-        * later?) 
+        * later?)
         */
        if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
             ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
@@ -1863,25 +1862,23 @@ pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board)
                        break;
 
 #ifdef SERIAL_DEBUG_PCI
-               printk("Setup PCI port: port %x, irq %d, type %d\n",
+               printk(KERN_DEBUG "Setup PCI port: port %x, irq %d, type %d\n",
                       serial_port.iobase, serial_port.irq, serial_port.iotype);
 #endif
-               
+
                priv->line[i] = serial8250_register_port(&serial_port);
                if (priv->line[i] < 0) {
                        printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
                        break;
                }
        }
-
        priv->nr = i;
-
        return priv;
 
- err_deinit:
+err_deinit:
        if (quirk->exit)
                quirk->exit(dev);
- err_out:
+err_out:
        return priv;
 }
 EXPORT_SYMBOL_GPL(pciserial_init_ports);
@@ -2171,22 +2168,22 @@ static struct pci_device_id serial_pci_tbl[] = {
                pbn_b0_8_1843200_200 },
 
        {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
-               PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                pbn_b2_bt_1_115200 },
        {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
-               PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                pbn_b2_bt_2_115200 },
        {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
-               PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                pbn_b2_bt_4_115200 },
        {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
-               PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                pbn_b2_bt_2_115200 },
        {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
-               PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                pbn_b2_bt_4_115200 },
        {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
-               PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                pbn_b2_8_115200 },
        {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,
                PCI_ANY_ID, PCI_ANY_ID, 0, 0,
@@ -2201,11 +2198,11 @@ static struct pci_device_id serial_pci_tbl[] = {
        /*
         * VScom SPCOM800, from sl@s.pl
         */
-       {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, 
-               PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+       {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                pbn_b2_8_921600 },
        {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
-               PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                pbn_b2_4_921600 },
        {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
                PCI_SUBVENDOR_ID_KEYSPAN,
@@ -2223,27 +2220,27 @@ static struct pci_device_id serial_pci_tbl[] = {
                pbn_b2_4_115200 },
        {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
                PCI_SUBVENDOR_ID_CHASE_PCIFAST,
-               PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, 
+               PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
                pbn_b2_4_460800 },
        {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
                PCI_SUBVENDOR_ID_CHASE_PCIFAST,
-               PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, 
+               PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
                pbn_b2_8_460800 },
        {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
                PCI_SUBVENDOR_ID_CHASE_PCIFAST,
-               PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, 
+               PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
                pbn_b2_16_460800 },
        {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
                PCI_SUBVENDOR_ID_CHASE_PCIFAST,
-               PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, 
+               PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
                pbn_b2_16_460800 },
        {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
                PCI_SUBVENDOR_ID_CHASE_PCIRAS,
-               PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, 
+               PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
                pbn_b2_4_460800 },
        {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
                PCI_SUBVENDOR_ID_CHASE_PCIRAS,
-               PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, 
+               PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
                pbn_b2_8_460800 },
        {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
                PCI_SUBVENDOR_ID_EXSYS,
@@ -2269,10 +2266,12 @@ static struct pci_device_id serial_pci_tbl[] = {
                PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                pbn_b1_8_115200 },
        {       PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
-               PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0,
+               PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4,
+               0, 0,
                pbn_b0_4_921600 },
        {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
-               PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 0,
+               PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL,
+               0, 0,
                pbn_b0_4_1152000 },
 
                /*
@@ -2312,7 +2311,7 @@ static struct pci_device_id serial_pci_tbl[] = {
         * Digitan DS560-558, from jimd@esoft.com
         */
        {       PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
-               PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                pbn_b1_1_115200 },
 
        /*
@@ -2320,16 +2319,16 @@ static struct pci_device_id serial_pci_tbl[] = {
         *  The 400L and 800L have a custom setup quirk.
         */
        {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
-               PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                pbn_b0_1_921600 },
        {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
-               PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                pbn_b0_2_921600 },
        {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
-               PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                pbn_b0_4_921600 },
        {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
-               PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                pbn_b0_4_921600 },
        {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
                PCI_ANY_ID, PCI_ANY_ID, 0, 0,