#define AD7291_VOLTAGE_ALERT_STATUS 0x1F
#define AD7291_T_ALERT_STATUS 0x20
+#define AD7291_BITS 12
#define AD7291_VOLTAGE_LIMIT_COUNT 8
/*
* AD7291 command
*/
-#define AD7291_AUTOCYCLE (1 << 0)
-#define AD7291_RESET (1 << 1)
-#define AD7291_ALERT_CLEAR (1 << 2)
-#define AD7291_ALERT_POLARITY (1 << 3)
-#define AD7291_EXT_REF (1 << 4)
-#define AD7291_NOISE_DELAY (1 << 5)
-#define AD7291_T_SENSE_MASK (1 << 7)
-#define AD7291_VOLTAGE_MASK 0xFF00
-#define AD7291_VOLTAGE_OFFSET 0x8
+#define AD7291_AUTOCYCLE BIT(0)
+#define AD7291_RESET BIT(1)
+#define AD7291_ALERT_CLEAR BIT(2)
+#define AD7291_ALERT_POLARITY BIT(3)
+#define AD7291_EXT_REF BIT(4)
+#define AD7291_NOISE_DELAY BIT(5)
+#define AD7291_T_SENSE_MASK BIT(7)
+#define AD7291_VOLTAGE_MASK GENMASK(15, 8)
+#define AD7291_VOLTAGE_OFFSET 8
/*
* AD7291 value masks
*/
-#define AD7291_CHANNEL_MASK 0xF000
-#define AD7291_BITS 12
-#define AD7291_VALUE_MASK 0xFFF
-#define AD7291_T_VALUE_SIGN 0x400
-#define AD7291_T_VALUE_FLOAT_OFFSET 2
-#define AD7291_T_VALUE_FLOAT_MASK 0x2
+#define AD7291_VALUE_MASK GENMASK(11, 0)
struct ad7291_chip_info {
struct i2c_client *client;
offset = chan->channel;
break;
case IIO_TEMP:
- offset = 8;
+ offset = AD7291_VOLTAGE_OFFSET;
break;
default:
return 0;
switch (chan->type) {
case IIO_VOLTAGE:
- if (chip->c_mask & (1 << (15 - chan->channel)))
+ if (chip->c_mask & BIT(15 - chan->channel))
return 1;
else
return 0;
}
/* Enable this channel alone */
regval = chip->command & (~AD7291_VOLTAGE_MASK);
- regval |= 1 << (15 - chan->channel);
+ regval |= BIT(15 - chan->channel);
ret = ad7291_i2c_write(chip, AD7291_COMMAND, regval);
if (ret < 0) {
mutex_unlock(&chip->state_lock);