#define HAS_128_BYTE_Y_TILING(dev_priv) (!IS_GEN2(dev_priv) && \
!(IS_I915G(dev_priv) || \
IS_I915GM(dev_priv)))
-#define SUPPORTS_TV(dev) (INTEL_INFO(dev)->supports_tv)
-#define I915_HAS_HOTPLUG(dev) (INTEL_INFO(dev)->has_hotplug)
+#define SUPPORTS_TV(dev_priv) ((dev_priv)->info.supports_tv)
+#define I915_HAS_HOTPLUG(dev_priv) ((dev_priv)->info.has_hotplug)
-#define HAS_FW_BLC(dev_priv) (INTEL_GEN(dev_priv) > 2)
-#define HAS_PIPE_CXSR(dev) (INTEL_INFO(dev)->has_pipe_cxsr)
-#define HAS_FBC(dev) (INTEL_INFO(dev)->has_fbc)
+#define HAS_FW_BLC(dev_priv) (INTEL_GEN(dev_priv) > 2)
+#define HAS_PIPE_CXSR(dev_priv) ((dev_priv)->info.has_pipe_cxsr)
+#define HAS_FBC(dev_priv) ((dev_priv)->info.has_fbc)
#define HAS_IPS(dev_priv) (IS_HSW_ULT(dev_priv) || IS_BROADWELL(dev_priv))
-#define HAS_DP_MST(dev) (INTEL_INFO(dev)->has_dp_mst)
+#define HAS_DP_MST(dev_priv) ((dev_priv)->info.has_dp_mst)
-#define HAS_DDI(dev_priv) ((dev_priv)->info.has_ddi)
-#define HAS_FPGA_DBG_UNCLAIMED(dev) (INTEL_INFO(dev)->has_fpga_dbg)
-#define HAS_PSR(dev) (INTEL_INFO(dev)->has_psr)
-#define HAS_RC6(dev) (INTEL_INFO(dev)->has_rc6)
-#define HAS_RC6p(dev) (INTEL_INFO(dev)->has_rc6p)
+#define HAS_DDI(dev_priv) ((dev_priv)->info.has_ddi)
+#define HAS_FPGA_DBG_UNCLAIMED(dev_priv) ((dev_priv)->info.has_fpga_dbg)
+#define HAS_PSR(dev_priv) ((dev_priv)->info.has_psr)
+#define HAS_RC6(dev_priv) ((dev_priv)->info.has_rc6)
+#define HAS_RC6p(dev_priv) ((dev_priv)->info.has_rc6p)
-#define HAS_CSR(dev) (INTEL_INFO(dev)->has_csr)
+#define HAS_CSR(dev_priv) ((dev_priv)->info.has_csr)
#define HAS_RUNTIME_PM(dev_priv) ((dev_priv)->info.has_runtime_pm)
#define HAS_64BIT_RELOC(dev_priv) ((dev_priv)->info.has_64bit_reloc)
pdev->subsystem_device);
err_printf(m, "IOMMU enabled?: %d\n", error->iommu);
- if (HAS_CSR(dev)) {
+ if (HAS_CSR(dev_priv)) {
struct intel_csr *csr = &dev_priv->csr;
err_printf(m, "DMC loaded: %s\n",
struct drm_i915_private *dev_priv = to_i915(dev);
int pipe;
- if (I915_HAS_HOTPLUG(dev)) {
+ if (I915_HAS_HOTPLUG(dev_priv)) {
i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
}
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_USER_INTERRUPT;
- if (I915_HAS_HOTPLUG(dev)) {
+ if (I915_HAS_HOTPLUG(dev_priv)) {
i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0);
POSTING_READ(PORT_HOTPLUG_EN);
struct drm_i915_private *dev_priv = to_i915(dev);
int pipe;
- if (I915_HAS_HOTPLUG(dev)) {
+ if (I915_HAS_HOTPLUG(dev_priv)) {
i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
}
power_domain = intel_display_port_power_domain(intel_encoder);
intel_display_power_get(dev_priv, power_domain);
- if (I915_HAS_HOTPLUG(dev)) {
+ if (I915_HAS_HOTPLUG(dev_priv)) {
/* We can not rely on the HPD pin always being correctly wired
* up, for example many KVM do not pass it through, and so
* only trust an assertion that the monitor is connected.
* broken monitor (without edid) to work behind a broken kvm (that fails
* to have the right resistors for HP detection) needs to fix this up.
* For now just bail out. */
- if (I915_HAS_HOTPLUG(dev) && !i915.load_detect_test) {
+ if (I915_HAS_HOTPLUG(dev_priv) && !i915.load_detect_test) {
status = connector_status_disconnected;
goto out;
}
crt->base.disable = intel_disable_crt;
}
crt->base.enable = intel_enable_crt;
- if (I915_HAS_HOTPLUG(dev) &&
+ if (I915_HAS_HOTPLUG(dev_priv) &&
!dmi_check_system(intel_spurious_crt_detect))
crt->base.hpd_pin = HPD_CRT;
if (HAS_DDI(dev_priv)) {
drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
- if (!I915_HAS_HOTPLUG(dev))
+ if (!I915_HAS_HOTPLUG(dev_priv))
intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
/*
}
}
- if (HAS_PIPE_CXSR(dev)) {
+ if (HAS_PIPE_CXSR(dev_priv)) {
if (intel_crtc->lowfreq_avail) {
DRM_DEBUG_KMS("enabling CxSR downclocking\n");
pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
} else if (IS_GEN2(dev_priv))
intel_dvo_init(dev);
- if (SUPPORTS_TV(dev))
+ if (SUPPORTS_TV(dev_priv))
intel_tv_init(dev);
intel_psr_init(dev);
}
/* init MST on ports that can support it */
- if (HAS_DP_MST(dev) && !is_edp(intel_dp) &&
+ if (HAS_DP_MST(dev_priv) && !is_edp(intel_dp) &&
(port == PORT_B || port == PORT_C || port == PORT_D))
intel_dp_mst_encoder_init(intel_dig_port,
intel_connector->base.base.id);
if (intel_connector->mst_port)
continue;
- if (!connector->polled && I915_HAS_HOTPLUG(dev) &&
+ if (!connector->polled && I915_HAS_HOTPLUG(dev_priv) &&
intel_connector->encoder->hpd_pin > HPD_NONE) {
connector->polled = enabled ?
DRM_CONNECTOR_POLL_CONNECT |
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
- if (!HAS_PSR(dev)) {
+ if (!HAS_PSR(dev_priv)) {
DRM_DEBUG_KMS("PSR not supported on this platform\n");
return;
}