brcmfmac: Fix OOB interrupt not working for BCM43362
authorHans de Goede <hdegoede@redhat.com>
Tue, 29 Jul 2014 12:23:23 +0000 (14:23 +0200)
committerJohn W. Linville <linville@tuxdriver.com>
Tue, 29 Jul 2014 14:32:57 +0000 (10:32 -0400)
It has taken me a long long time to get the OOB interrupt working on the
AP6210 sdio wifi/bt module found on various Allwinner A20 boards. In the
end I found these magic register pokes in the cubietruck kernel tree:
https://github.com/cubieboard2/linux-sunxi/commit/7f08ba395617d17e7a711507503d89a50406fe7a

This is also done for the bcm43362 in broadcom's internal/proprietary driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
[arend@broadcom.com: rebased changing BCM43362 chip id to fix compilation]
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c

index dc2db47a1c73a970522e3c7afe6cdfa268731db3..8dbd5dbb78fd14c8b697c04379e88bdf7442784f 100644 (file)
@@ -38,7 +38,9 @@
 #include <brcm_hw_ids.h>
 #include <brcmu_utils.h>
 #include <brcmu_wifi.h>
+#include <chipcommon.h>
 #include <soc.h>
+#include "chip.h"
 #include "dhd_bus.h"
 #include "dhd_dbg.h"
 #include "sdio_host.h"
@@ -118,6 +120,7 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
 {
        int ret = 0;
        u8 data;
+       u32 addr, gpiocontrol;
        unsigned long flags;
 
        if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) {
@@ -147,6 +150,19 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
 
                sdio_claim_host(sdiodev->func[1]);
 
+               if (sdiodev->bus_if->chip == BRCM_CC_43362_CHIP_ID) {
+                       /* assign GPIO to SDIO core */
+                       addr = CORE_CC_REG(SI_ENUM_BASE, gpiocontrol);
+                       gpiocontrol = brcmf_sdiod_regrl(sdiodev, addr, &ret);
+                       gpiocontrol |= 0x2;
+                       brcmf_sdiod_regwl(sdiodev, addr, gpiocontrol, &ret);
+
+                       brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_SELECT, 0xf,
+                                         &ret);
+                       brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_OUT, 0, &ret);
+                       brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_EN, 0x2, &ret);
+               }
+
                /* must configure SDIO_CCCR_IENx to enable irq */
                data = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_IENx, &ret);
                data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;