};
#define DS4_FEATURE_REPORT_0x02_SIZE 37
+#define DS4_FEATURE_REPORT_0x05_SIZE 41
#define DS4_FEATURE_REPORT_0x81_SIZE 7
#define DS4_INPUT_REPORT_0x11_SIZE 78
#define DS4_OUTPUT_REPORT_0x05_SIZE 32
#define DS4_SENSOR_SUFFIX " Motion Sensors"
#define DS4_TOUCHPAD_SUFFIX " Touchpad"
+#define DS4_GYRO_RES_PER_DEG_S 1024
+#define DS4_ACC_RES_PER_G 8192
+
static DEFINE_SPINLOCK(sony_dev_list_lock);
static LIST_HEAD(sony_device_list);
static DEFINE_IDA(sony_device_id_allocator);
+/* Used for calibration of DS4 accelerometer and gyro. */
+struct ds4_calibration_data {
+ int abs_code;
+ short bias;
+ /* Calibration requires scaling against a sensitivity value, which is a
+ * float. Store sensitivity as a fraction to limit floating point
+ * calculations until final calibration.
+ */
+ int sens_numer;
+ int sens_denom;
+};
+
struct sony_sc {
spinlock_t lock;
struct list_head list_node;
u8 led_delay_off[MAX_LEDS];
u8 led_count;
bool ds4_dongle_connected;
+ /* DS4 calibration data */
+ struct ds4_calibration_data ds4_calib_data[6];
};
static void sony_set_leds(struct sony_sc *sc);
int n, m, offset, num_touch_data, max_touch_data;
u8 cable_state, battery_capacity, battery_charging;
- /* Order of hw axes is gyro first, then accelerometer. */
- int axes[6] = {ABS_RX, ABS_RY, ABS_RZ, ABS_X, ABS_Y, ABS_Z};
-
/* When using Bluetooth the header is 2 bytes longer, so skip these. */
int data_offset = (sc->quirks & DUALSHOCK4_CONTROLLER_USB) ? 0 : 2;
input_report_key(sc->touchpad, BTN_LEFT, rd[offset+2] & 0x2);
offset = data_offset + DS4_INPUT_REPORT_GYRO_X_OFFSET;
- for (n = 0; n < 6; n++, offset += 2) {
- short value = get_unaligned_le16(&rd[offset]);
+ for (n = 0; n < 6; n++) {
+ /* Store data in int for more precision during mult_frac. */
+ int raw_data = (short)((rd[offset+1] << 8) | rd[offset]);
+ struct ds4_calibration_data *calib = &sc->ds4_calib_data[n];
+
+ /* High precision is needed during calibration, but the
+ * calibrated values are within 32-bit.
+ * Note: we swap numerator 'x' and 'numer' in mult_frac for
+ * precision reasons so we don't need 64-bit.
+ */
+ int calib_data = mult_frac(calib->sens_numer,
+ raw_data - calib->bias,
+ calib->sens_denom);
- input_report_abs(sc->sensor_dev, axes[n], value);
+ input_report_abs(sc->sensor_dev, calib->abs_code, calib_data);
+ offset += 2;
}
input_sync(sc->sensor_dev);
size_t name_sz;
char *name;
int ret;
+ int range;
sc->sensor_dev = input_allocate_device();
if (!sc->sensor_dev)
snprintf(name, name_sz, "%s" DS4_SENSOR_SUFFIX, sc->hdev->name);
sc->sensor_dev->name = name;
- input_set_abs_params(sc->sensor_dev, ABS_X, -32768, 32767, 0, 0);
- input_set_abs_params(sc->sensor_dev, ABS_Y, -32768, 32767, 0, 0);
- input_set_abs_params(sc->sensor_dev, ABS_Z, -32768, 32767, 0, 0);
-
- input_set_abs_params(sc->sensor_dev, ABS_RX, -32768, 32767, 0, 0);
- input_set_abs_params(sc->sensor_dev, ABS_RY, -32768, 32767, 0, 0);
- input_set_abs_params(sc->sensor_dev, ABS_RZ, -32768, 32767, 0, 0);
+ range = DS4_ACC_RES_PER_G*4;
+ input_set_abs_params(sc->sensor_dev, ABS_X, -range, range, 16, 0);
+ input_set_abs_params(sc->sensor_dev, ABS_Y, -range, range, 16, 0);
+ input_set_abs_params(sc->sensor_dev, ABS_Z, -range, range, 16, 0);
+ input_abs_set_res(sc->sensor_dev, ABS_X, DS4_ACC_RES_PER_G);
+ input_abs_set_res(sc->sensor_dev, ABS_Y, DS4_ACC_RES_PER_G);
+ input_abs_set_res(sc->sensor_dev, ABS_Z, DS4_ACC_RES_PER_G);
+
+ range = DS4_GYRO_RES_PER_DEG_S*2048;
+ input_set_abs_params(sc->sensor_dev, ABS_RX, -range, range, 16, 0);
+ input_set_abs_params(sc->sensor_dev, ABS_RY, -range, range, 16, 0);
+ input_set_abs_params(sc->sensor_dev, ABS_RZ, -range, range, 16, 0);
+ input_abs_set_res(sc->sensor_dev, ABS_RX, DS4_GYRO_RES_PER_DEG_S);
+ input_abs_set_res(sc->sensor_dev, ABS_RY, DS4_GYRO_RES_PER_DEG_S);
+ input_abs_set_res(sc->sensor_dev, ABS_RZ, DS4_GYRO_RES_PER_DEG_S);
__set_bit(INPUT_PROP_ACCELEROMETER, sc->sensor_dev->propbit);
}
/*
- * Requesting feature report 0x02 in Bluetooth mode changes the state of the
- * controller so that it sends full input reports of type 0x11.
+ * Request DS4 calibration data for the motion sensors.
+ * For Bluetooth this also affects the operating mode (see below).
*/
-static int dualshock4_set_operational_bt(struct hid_device *hdev)
+static int dualshock4_get_calibration_data(struct sony_sc *sc)
{
u8 *buf;
int ret;
+ short gyro_pitch_bias, gyro_pitch_plus, gyro_pitch_minus;
+ short gyro_yaw_bias, gyro_yaw_plus, gyro_yaw_minus;
+ short gyro_roll_bias, gyro_roll_plus, gyro_roll_minus;
+ short gyro_speed_plus, gyro_speed_minus;
+ short acc_x_plus, acc_x_minus;
+ short acc_y_plus, acc_y_minus;
+ short acc_z_plus, acc_z_minus;
+ int speed_2x;
+ int range_2g;
+
+ /* For Bluetooth we use a different request, which supports CRC.
+ * Note: in Bluetooth mode feature report 0x02 also changes the state
+ * of the controller, so that it sends input reports of type 0x11.
+ */
+ if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) {
+ buf = kmalloc(DS4_FEATURE_REPORT_0x02_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
- buf = kmalloc(DS4_FEATURE_REPORT_0x02_SIZE, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
+ ret = hid_hw_raw_request(sc->hdev, 0x02, buf,
+ DS4_FEATURE_REPORT_0x02_SIZE,
+ HID_FEATURE_REPORT,
+ HID_REQ_GET_REPORT);
+ if (ret < 0)
+ goto err_stop;
+ } else {
+ u8 bthdr = 0xA3;
+ u32 crc;
+ u32 report_crc;
+ int retries;
- ret = hid_hw_raw_request(hdev, 0x02, buf, DS4_FEATURE_REPORT_0x02_SIZE,
- HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+ buf = kmalloc(DS4_FEATURE_REPORT_0x05_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
- kfree(buf);
+ for (retries = 0; retries < 3; retries++) {
+ ret = hid_hw_raw_request(sc->hdev, 0x05, buf,
+ DS4_FEATURE_REPORT_0x05_SIZE,
+ HID_FEATURE_REPORT,
+ HID_REQ_GET_REPORT);
+ if (ret < 0)
+ goto err_stop;
+ /* CRC check */
+ crc = crc32_le(0xFFFFFFFF, &bthdr, 1);
+ crc = ~crc32_le(crc, buf, DS4_FEATURE_REPORT_0x05_SIZE-4);
+ report_crc = get_unaligned_le32(&buf[DS4_FEATURE_REPORT_0x05_SIZE-4]);
+ if (crc != report_crc) {
+ hid_warn(sc->hdev, "DualShock 4 calibration report's CRC check failed, received crc 0x%0x != 0x%0x\n",
+ report_crc, crc);
+ if (retries < 2) {
+ hid_warn(sc->hdev, "Retrying DualShock 4 get calibration report request\n");
+ continue;
+ } else {
+ ret = -EILSEQ;
+ goto err_stop;
+ }
+ } else {
+ break;
+ }
+ }
+ }
+
+ gyro_pitch_bias = get_unaligned_le16(&buf[1]);
+ gyro_yaw_bias = get_unaligned_le16(&buf[3]);
+ gyro_roll_bias = get_unaligned_le16(&buf[5]);
+ if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) {
+ gyro_pitch_plus = get_unaligned_le16(&buf[7]);
+ gyro_pitch_minus = get_unaligned_le16(&buf[9]);
+ gyro_yaw_plus = get_unaligned_le16(&buf[11]);
+ gyro_yaw_minus = get_unaligned_le16(&buf[13]);
+ gyro_roll_plus = get_unaligned_le16(&buf[15]);
+ gyro_roll_minus = get_unaligned_le16(&buf[17]);
+ } else {
+ gyro_pitch_plus = get_unaligned_le16(&buf[7]);
+ gyro_yaw_plus = get_unaligned_le16(&buf[9]);
+ gyro_roll_plus = get_unaligned_le16(&buf[11]);
+ gyro_pitch_minus = get_unaligned_le16(&buf[13]);
+ gyro_yaw_minus = get_unaligned_le16(&buf[15]);
+ gyro_roll_minus = get_unaligned_le16(&buf[17]);
+ }
+ gyro_speed_plus = get_unaligned_le16(&buf[19]);
+ gyro_speed_minus = get_unaligned_le16(&buf[21]);
+ acc_x_plus = get_unaligned_le16(&buf[23]);
+ acc_x_minus = get_unaligned_le16(&buf[25]);
+ acc_y_plus = get_unaligned_le16(&buf[27]);
+ acc_y_minus = get_unaligned_le16(&buf[29]);
+ acc_z_plus = get_unaligned_le16(&buf[31]);
+ acc_z_minus = get_unaligned_le16(&buf[33]);
+
+ /* Set gyroscope calibration and normalization parameters.
+ * Data values will be normalized to 1/DS4_GYRO_RES_PER_DEG_S degree/s.
+ */
+ speed_2x = (gyro_speed_plus + gyro_speed_minus);
+ sc->ds4_calib_data[0].abs_code = ABS_RX;
+ sc->ds4_calib_data[0].bias = gyro_pitch_bias;
+ sc->ds4_calib_data[0].sens_numer = speed_2x*DS4_GYRO_RES_PER_DEG_S;
+ sc->ds4_calib_data[0].sens_denom = gyro_pitch_plus - gyro_pitch_minus;
+
+ sc->ds4_calib_data[1].abs_code = ABS_RY;
+ sc->ds4_calib_data[1].bias = gyro_yaw_bias;
+ sc->ds4_calib_data[1].sens_numer = speed_2x*DS4_GYRO_RES_PER_DEG_S;
+ sc->ds4_calib_data[1].sens_denom = gyro_yaw_plus - gyro_yaw_minus;
+
+ sc->ds4_calib_data[2].abs_code = ABS_RZ;
+ sc->ds4_calib_data[2].bias = gyro_roll_bias;
+ sc->ds4_calib_data[2].sens_numer = speed_2x*DS4_GYRO_RES_PER_DEG_S;
+ sc->ds4_calib_data[2].sens_denom = gyro_roll_plus - gyro_roll_minus;
+
+ /* Set accelerometer calibration and normalization parameters.
+ * Data values will be normalized to 1/DS4_ACC_RES_PER_G G.
+ */
+ range_2g = acc_x_plus - acc_x_minus;
+ sc->ds4_calib_data[3].abs_code = ABS_X;
+ sc->ds4_calib_data[3].bias = acc_x_plus - range_2g / 2;
+ sc->ds4_calib_data[3].sens_numer = 2*DS4_ACC_RES_PER_G;
+ sc->ds4_calib_data[3].sens_denom = range_2g;
+
+ range_2g = acc_y_plus - acc_y_minus;
+ sc->ds4_calib_data[4].abs_code = ABS_Y;
+ sc->ds4_calib_data[4].bias = acc_y_plus - range_2g / 2;
+ sc->ds4_calib_data[4].sens_numer = 2*DS4_ACC_RES_PER_G;
+ sc->ds4_calib_data[4].sens_denom = range_2g;
+
+ range_2g = acc_z_plus - acc_z_minus;
+ sc->ds4_calib_data[5].abs_code = ABS_Z;
+ sc->ds4_calib_data[5].bias = acc_z_plus - range_2g / 2;
+ sc->ds4_calib_data[5].sens_numer = 2*DS4_ACC_RES_PER_G;
+ sc->ds4_calib_data[5].sens_denom = range_2g;
+
+err_stop:
+ kfree(buf);
return ret;
}
ret = sixaxis_set_operational_bt(hdev);
sony_init_output_report(sc, sixaxis_send_output_report);
} else if (sc->quirks & DUALSHOCK4_CONTROLLER) {
- if (sc->quirks & DUALSHOCK4_CONTROLLER_BT) {
- ret = dualshock4_set_operational_bt(hdev);
- if (ret < 0) {
- hid_err(hdev, "failed to set the Dualshock 4 operational mode\n");
- goto err_stop;
- }
+ ret = dualshock4_get_calibration_data(sc);
+ if (ret < 0) {
+ hid_err(hdev, "Failed to get calibration data from Dualshock 4\n");
+ goto err_stop;
}
/*
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff