pDot11dInfo->State = DOT11D_STATE_NONE;
pDot11dInfo->CountryIeLen = 0;
RESET_CIE_WATCHDOG(ieee);
-
- //printk("Dot11d_Reset()\n");
}
//
pTriple = (PCHNL_TXPOWER_TRIPLE)((u8*)pTriple + 3);
}
#if 1
- //printk("Dot11d_UpdateCountryIe(): Channel List:\n");
printk("Channel List:");
for(i=1; i<= MAX_CHANNEL_NUMBER; i++)
if(pDot11dInfo->channel_map[i] > 0)
pos += 8;
if (memcmp(pn, key->rx_pn, CCMP_PN_LEN) <= 0) {
- if (net_ratelimit()) {
- //printk(KERN_DEBUG "CCMP: replay detected: STA=%pM"
- // " previous PN %pm received PN %pm\n",
- // hdr->addr2, key->rx_pn, pn);
- }
key->dot11RSNAStatsCCMPReplays++;
return -4;
}
void ieee80211_ccmp_null(void)
{
-// printk("============>%s()\n", __FUNCTION__);
return;
}
void ieee80211_tkip_null(void)
{
-// printk("============>%s()\n", __FUNCTION__);
return;
}
return 0;
}
-// if(tid != 0) {
-// printk(KERN_WARNING ":)))))))))))%x %x %x, fc(%x)\n", tid, *last_seq, seq, header->frame_ctl);
-// }
if ((*last_seq == seq) &&
time_after(*last_time + IEEE_PACKET_RETRY_TIME, jiffies)) {
if (*last_frag == frag){
- //printk(KERN_WARNING "[1] go drop!\n");
goto drop;
}
if (*last_frag + 1 != frag)
/* out-of-order fragment */
- //printk(KERN_WARNING "[2] go drop!\n");
goto drop;
} else
*last_seq = seq;
return 0;
drop:
-// BUG_ON(!(fc & IEEE80211_FCTL_RETRY));
-// printk("DUP\n");
-
return 1;
}
bool
/* Indicat the packets to upper layer */
if (sub_skb) {
- //printk("0skb_len(%d)\n", skb->len);
sub_skb->protocol = eth_type_trans(sub_skb, ieee->dev);
memset(sub_skb->cb, 0, sizeof(sub_skb->cb));
sub_skb->dev = ieee->dev;
sub_skb->ip_summed = CHECKSUM_NONE; /* 802.11 crc not sufficient */
//skb->ip_summed = CHECKSUM_UNNECESSARY; /* 802.11 crc not sufficient */
ieee->last_rx_ps_time = jiffies;
- //printk("1skb_len(%d)\n", skb->len);
netif_rx(sub_skb);
}
}
IEEE80211_DEBUG(IEEE80211_DL_REORDER, "Packets indication!! IndicateSeq: %d, NewSeq: %d\n",\
pTS->RxIndicateSeq, SeqNum);
prxbIndicateArray[0] = prxb;
-// printk("========================>%s(): SeqNum is %d\n",__FUNCTION__,SeqNum);
index = 1;
} else {
/* Current packet is going to be inserted into pending list.*/
IEEE80211_DEBUG(IEEE80211_DL_REORDER,"Packets indication!! IndicateSeq: %d, NewSeq: %d\n",pTS->RxIndicateSeq, SeqNum);
prxbIndicateArray[index] = pReorderEntry->prxb;
- // printk("========================>%s(): pReorderEntry->SeqNum is %d\n",__FUNCTION__,pReorderEntry->SeqNum);
index++;
list_add_tail(&pReorderEntry->List,&ieee->RxReorder_Unused_List);
if(rx_stats->bContainHTC) {
LLCOffset += sHTCLng;
}
- //printk("ChkLength = %d\n", LLCOffset);
// Null packet, don't indicate it to upper layer
ChkLength = LLCOffset;/* + (Frame_WEP(frame)!=0 ?Adapter->MgntInfo.SecurityInfo.EncryptionHeadOverhead:0);*/
#ifdef JOHN_NOCPY
dev_kfree_skb(skb);
#endif
- //{just for debug added by david
- //printk("AMSDU::rxb->nr_subframes = %d\n",rxb->nr_subframes);
- //}
return rxb->nr_subframes;
}
}
}
/* Indicat the packets to upper layer */
- //printk("0skb_len(%d)\n", skb->len);
sub_skb->protocol = eth_type_trans(sub_skb, dev);
memset(sub_skb->cb, 0, sizeof(sub_skb->cb));
sub_skb->dev = dev;
sub_skb->ip_summed = CHECKSUM_NONE; /* 802.11 crc not sufficient */
//skb->ip_summed = CHECKSUM_UNNECESSARY; /* 802.11 crc not sufficient */
- //printk("1skb_len(%d)\n", skb->len);
netif_rx(sub_skb);
}
}
offset = (info_element->data[2] >> 1)*2;
- //printk("offset1:%x aid:%x\n",offset, ieee->assoc_id);
-
if(ieee->assoc_id < 8*offset ||
ieee->assoc_id > 8*(offset + info_element->len -3))
if(info_element->data[3+offset] & (1<<(ieee->assoc_id%8)))
network->dtim_data |= IEEE80211_DTIM_UCAST;
- //IEEE80211_DEBUG_MGMT("MFIE_TYPE_TIM: partially ignored\n");
break;
case MFIE_TYPE_ERP:
info_element->data[1] == 0x13 &&
info_element->data[2] == 0x74))
{
- //printk("========>%s(): athros AP is exist\n",__FUNCTION__);
network->atheros_cap_exist = true;
}
else
info_element->data[2] == 0x43) )
{
network->marvell_cap_exist = true;
- //printk("========>%s(): marvel AP is exist\n",__FUNCTION__);
}
case MFIE_TYPE_COUNTRY:
IEEE80211_DEBUG_SCAN("MFIE_TYPE_COUNTRY: %d bytes\n",
info_element->len);
- //printk("=====>Receive <%s> Country IE\n",network->ssid);
ieee80211_extract_country_ie(ieee, info_element, network, network->bssid);//addr2 is same as addr3 when from an AP
break;
#endif
old_param = dst->qos_data.param_count;
if(dst->flags & NETWORK_HAS_QOS_MASK){
//not update QOS paramter in beacon, as most AP will set all these parameter to 0.//WB
- // printk("====>%s(), aifs:%x, %x\n", __FUNCTION__, dst->qos_data.parameters.aifs[0], src->qos_data.parameters.aifs[0]);
- // memcpy(&dst->qos_data, &src->qos_data,
- // sizeof(struct ieee80211_qos_data));
}
else {
dst->qos_data.supported = src->qos_data.supported;
//YJ,add,080819,for hidden ap
if(is_beacon(beacon->header.frame_ctl) == 0)
network.flags = (~NETWORK_EMPTY_ESSID & network.flags)|(NETWORK_EMPTY_ESSID & target->flags);
- //if(strncmp(network.ssid, "linksys-c",9) == 0)
- // printk("====>2 network.ssid=%s FLAG=%d target.ssid=%s FLAG=%d\n", network.ssid, network.flags, target->ssid, target->flags);
if(((network.flags & NETWORK_EMPTY_ESSID) == NETWORK_EMPTY_ESSID) \
&& (((network.ssid_len > 0) && (strncmp(target->ssid, network.ssid, network.ssid_len)))\
||((ieee->current_network.ssid_len == network.ssid_len)&&(strncmp(ieee->current_network.ssid, network.ssid, network.ssid_len) == 0)&&(ieee->state == IEEE80211_NOLINK))))
ieee80211_process_probe_response(
ieee, (struct ieee80211_probe_response *)header, stats);
- //printk("----------->%s()\n", __func__);
if(ieee->sta_sleep || (ieee->ps != IEEE80211_PS_DISABLED &&
ieee->iw_mode == IW_MODE_INFRA &&
ieee->state == IEEE80211_LINKED))
/* as for the completion function, it does not need
* to check it any more.
* */
- //printk("%s():insert to waitqueue!\n",__FUNCTION__);
skb_queue_tail(&ieee->skb_waitQ[tcb_desc->queue_index], skb);
} else {
- //printk("TX packet!\n");
ieee->softmac_hard_start_xmit(skb,ieee->dev);
//dev_kfree_skb_any(skb);//edit by thomas
}
tcb_desc->RATRIndex = 7;
tcb_desc->bTxDisableRateFallBack = 1;
tcb_desc->bTxUseDriverAssingedRate = 1;
- //printk("=============>%s()\n", __FUNCTION__);
if(single){
header->seq_ctl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
tmp_generic_ie_len = sizeof(ieee->pHTInfo->szRT2RTAggBuffer);
HTConstructRT2RTAggElement(ieee, tmp_generic_ie_buf, &tmp_generic_ie_len);
}
-// printk("===============>tmp_ht_cap_len is %d,tmp_ht_info_len is %d, tmp_generic_ie_len is %d\n",tmp_ht_cap_len,tmp_ht_info_len,tmp_generic_ie_len);
#endif
beacon_size = sizeof(struct ieee80211_probe_response)+2+
ssid_len
memcpy(tag, realtek_ie_buf,realtek_ie_len -2 );
}
}
-// printk("<=====%s(), %p, %p\n", __FUNCTION__, ieee->dev, ieee->dev->dev_addr);
-// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
return skb;
}
else{
ieee->state = IEEE80211_ASSOCIATING_AUTHENTICATING ;
IEEE80211_DEBUG_MGMT("Sending authentication request\n");
- //printk(KERN_WARNING "Sending authentication request\n");
softmac_mgmt_xmit(skb, ieee);
//BUGON when you try to add_timer twice, using mod_timer may be better, john0709
if(!timer_pending(&ieee->associate_timer)){
if(ieee->LPSDelayCnt)
{
- //printk("===============>Delay enter LPS for DHCP and ARP packets...\n");
ieee->LPSDelayCnt --;
return 0;
}
dtim = ieee->current_network.dtim_data;
-// printk("%s():DTIM:%d\n",__FUNCTION__,dtim);
if(!(dtim & IEEE80211_DTIM_VALID))
return 0;
timeout = ieee->current_network.beacon_interval; //should we use ps_timeout value or beacon_interval
- //printk("VALID\n");
ieee->current_network.dtim_data = IEEE80211_DTIM_INVALID;
/* there's no need to nofity AP that I find you buffered with broadcast packet */
if(dtim & (IEEE80211_DTIM_UCAST & ieee->ps))
return 2;
if(!time_after(jiffies, ieee->dev->trans_start + MSECS(timeout))){
-// printk("%s():111Oh Oh ,it is not time out return 0\n",__FUNCTION__);
return 0;
}
if(!time_after(jiffies, ieee->last_rx_ps_time + MSECS(timeout))){
-// printk("%s():222Oh Oh ,it is not time out return 0\n",__FUNCTION__);
return 0;
}
if((ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE ) &&
else
LPSAwakeIntvl_tmp = pPSC->LPSAwakeIntvl;//ieee->current_network.tim.tim_count;//pPSC->LPSAwakeIntvl;
}
- //printk("=========>%s()assoc_id:%d(%#x),bAwakePktSent:%d,DTIM:%d, sleep interval:%d, LPSAwakeIntvl_tmp:%d, count:%d\n",__func__,ieee->assoc_id,cpu_to_le16(ieee->assoc_id),ieee->bAwakePktSent,ieee->current_network.dtim_period,pPSC->LPSAwakeIntvl,LPSAwakeIntvl_tmp,count);
*time_l = ieee->current_network.last_dtim_sta_time[0]
+ MSECS(ieee->current_network.beacon_interval * LPSAwakeIntvl_tmp);
/* 2 wake, 1 sleep, 0 do nothing */
if(sleep == 0)//it is not time out or dtim is not valid
{
- //printk("===========>sleep is 0,do nothing\n");
goto out;
}
if(sleep == 1){
- //printk("===========>sleep is 1,to sleep\n");
if(ieee->sta_sleep == 1){
- //printk("%s(1): sta_sleep = 1, sleep again ++++++++++ \n", __func__);
ieee->enter_sleep_state(ieee->dev,th,tl);
}
else if(ieee->sta_sleep == 0){
- // printk("send null 1\n");
spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
if(ieee->ps_is_queue_empty(ieee->dev)){
ieee->sta_sleep = 2;
ieee->ack_tx_to_ieee = 1;
- //printk("%s(2): sta_sleep = 0, notify AP we will sleeped ++++++++++ SendNullFunctionData\n", __func__);
ieee80211_sta_ps_send_null_frame(ieee,1);
ieee->ps_th = th;
ieee->ps_tl = tl;
ieee->bAwakePktSent = false;//after null to power save we set it to false. not listen every beacon.
}else if(sleep == 2){
- //printk("==========>sleep is 2,to wakeup\n");
spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
- //printk("%s(3): pkt buffered in ap will awake ++++++++++ ieee80211_sta_wakeup\n", __func__);
ieee80211_sta_wakeup(ieee,1);
spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags2);
if(nl){
if(ieee->pHTInfo->IOTAction & HT_IOT_ACT_NULL_DATA_POWER_SAVING)
{
- //printk("%s(1): notify AP we are awaked ++++++++++ SendNullFunctionData\n", __func__);
- //printk("Warning: driver is probably failing to report TX ps error\n");
ieee->ack_tx_to_ieee = 1;
ieee80211_sta_ps_send_null_frame(ieee, 0);
}
else
{
ieee->ack_tx_to_ieee = 1;
- //printk("%s(2): notify AP we are awaked ++++++++++ Send PS-Poll\n", __func__);
ieee80211_sta_ps_send_pspoll_frame(ieee);
}
}
if(ieee->pHTInfo->IOTAction & HT_IOT_ACT_NULL_DATA_POWER_SAVING)
{
- //printk("%s(3): notify AP we are awaked ++++++++++ SendNullFunctionData\n", __func__);
- //printk("Warning: driver is probably failing to report TX ps error\n");
ieee->ack_tx_to_ieee = 1;
ieee80211_sta_ps_send_null_frame(ieee, 0);
}
{
ieee->ack_tx_to_ieee = 1;
ieee->polling = true;
- //printk("%s(4): notify AP we are awaked ++++++++++ Send PS-Poll\n", __func__);
//ieee80211_sta_ps_send_null_frame(ieee, 0);
ieee80211_sta_ps_send_pspoll_frame(ieee);
}
/* Null frame with PS bit set */
if(success){
ieee->sta_sleep = 1;
- //printk("notify AP we will sleep and send null ok, so sleep now++++++++++ enter_sleep_state\n");
ieee->enter_sleep_state(ieee->dev,ieee->ps_th,ieee->ps_tl);
}
} else {/* 21112005 - tx again null without PS bit if lost */
//ieee80211_sta_ps_send_null_frame(ieee, 0);
if(ieee->pHTInfo->IOTAction & HT_IOT_ACT_NULL_DATA_POWER_SAVING)
{
- //printk("notify AP we will sleep but send bull failed, so resend++++++++++ SendNullFunctionData\n");
ieee80211_sta_ps_send_null_frame(ieee, 0);
}
else
{
- //printk("notify AP we are awaked but send pspoll failed, so resend++++++++++ Send PS-Poll\n");
ieee80211_sta_ps_send_pspoll_frame(ieee);
}
spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags2);
/* as for the completion function, it does not need
* to check it any more.
* */
- //printk("error:no descriptor left@queue_index %d\n", queue_index);
//ieee80211_rtl_stop_queue(ieee);
#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
skb_queue_tail(&ieee->skb_drv_aggQ[queue_index], txb->fragments[i]);
if (ieee->current_network.beacon_interval == 0)
ieee->current_network.beacon_interval = 100;
-// printk("===>%s(), chan:%d\n", __FUNCTION__, ieee->current_network.channel);
-// ieee->set_chan(ieee->dev,ieee->current_network.channel);
for(i = 0; i < 17; i++) {
ieee->last_rxseq_num[i] = -1;
(!ieee->enter_sleep_state) ||
(!ieee->ps_is_queue_empty)){
- // printk("ERROR. PS mode is tryied to be use but driver missed a callback\n\n");
-
return -1;
}
#endif
#if (WIRELESS_EXT < 18)
if (ieee->wpa_enabled && network->wpa_ie_len){
char buf[MAX_WPA_IE_LEN * 2 + 30];
- // printk("WPA IE\n");
u8 *p = buf;
p += sprintf(p, "wpa_ie=");
for (i = 0; i < network->wpa_ie_len; i++) {
struct ieee80211_security sec = {
.flags = 0,
};
- //printk("======>encoding flag:%x,ext flag:%x, ext alg:%d\n", encoding->flags,ext->ext_flags, ext->alg);
idx = encoding->flags & IW_ENCODE_INDEX;
if (idx) {
if (idx < 1 || idx > WEP_KEYS)
group_key = 1;
} else {
/* some Cisco APs use idx>0 for unicast in dynamic WEP */
- //printk("not group key, flags:%x, ext->alg:%d\n", ext->ext_flags, ext->alg);
if (idx != 0 && ext->alg != IW_ENCODE_ALG_WEP)
return -EINVAL;
if (ieee->iw_mode == IW_MODE_INFRA)
sec.level = SEC_LEVEL_0;
sec.flags |= SEC_LEVEL;
}
- //printk("disabled: flag:%x\n", encoding->flags);
goto done;
}
goto done;
}
#if 1
- //skip_host_crypt:
- //printk("skip_host_crypt:ext_flags:%x\n", ext->ext_flags);
if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
ieee->tx_keyidx = idx;
sec.active_key = idx;
switch (data->flags & IW_AUTH_INDEX) {
case IW_AUTH_WPA_VERSION:
/*need to support wpa2 here*/
- //printk("wpa version:%x\n", data->value);
break;
case IW_AUTH_CIPHER_PAIRWISE:
case IW_AUTH_CIPHER_GROUP:
break;
case IW_AUTH_80211_AUTH_ALG:
- //printk("======>%s():data->value is %d\n",__FUNCTION__,data->value);
- // ieee->open_wep = (data->value&IW_AUTH_ALG_OPEN_SYSTEM)?1:0;
if(data->value & IW_AUTH_ALG_SHARED_KEY){
ieee->open_wep = 0;
ieee->auth_mode = 1;
else if(data->value & IW_AUTH_ALG_LEAP){
ieee->open_wep = 1;
ieee->auth_mode = 2;
- //printk("hahahaa:LEAP\n");
}
else
return -EINVAL;
- //printk("open_wep:%d\n", ieee->open_wep);
break;
#if 1
case IW_AUTH_WPA_ENABLED:
ieee->wpa_enabled = (data->value)?1:0;
- //printk("enable wpa:%d\n", ieee->wpa_enabled);
break;
#endif
if (len>MAX_WPA_IE_LEN || (len && ie == NULL))
{
- // printk("return error out, len:%d\n", len);
return -EINVAL;
}
void HTUpdateDefaultSetting(struct ieee80211_device* ieee)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
- //const typeof( ((struct ieee80211_device *)0)->pHTInfo ) *__mptr = &pHTInfo;
- //printk("pHTinfo:%p, &pHTinfo:%p, mptr:%p, offsetof:%x\n", pHTInfo, &pHTInfo, __mptr, offsetof(struct ieee80211_device, pHTInfo));
- //printk("===>ieee:%p,\n", ieee);
// ShortGI support
pHTInfo->bRegShortGI20MHz= 1;
pHTInfo->bRegShortGI40MHz= 1;
if (pRet->TSpec.f.TSInfo.field.ucTSID == TID)
if(pRet->TSpec.f.TSInfo.field.ucDirection == dir)
{
- // printk("Bingo! got it\n");
break;
}
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff