ARM: PL08x: don't manipulate txd->srcbus or txd->dstbus during LLI fill

Don't alter any txd->srcbus or txd->dstbus values while building the
LLI list.  This allows us to see the original dma_addr_t values passed
in via the prep_memcpy() method.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index be7fa174d6c0460a3ce443bc7572c46469b45bc4..39970c5038d6c0995f926c59049c373bece1259d 100644 (file)
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -481,38 +481,45 @@ static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth,
        return retbits;
 }
 
+struct pl08x_lli_build_data {
+       struct pl08x_txd *txd;
+       struct pl08x_driver_data *pl08x;
+       struct pl08x_bus_data srcbus;
+       struct pl08x_bus_data dstbus;
+       size_t remainder;
+};
+
 /*
  * Autoselect a master bus to use for the transfer
  * this prefers the destination bus if both available
  * if fixed address on one bus the other will be chosen
  */
-static void pl08x_choose_master_bus(struct pl08x_bus_data *src_bus,
-       struct pl08x_bus_data *dst_bus, struct pl08x_bus_data **mbus,
-       struct pl08x_bus_data **sbus, u32 cctl)
+static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd,
+       struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl)
 {
        if (!(cctl & PL080_CONTROL_DST_INCR)) {
-               *mbus = src_bus;
-               *sbus = dst_bus;
+               *mbus = &bd->srcbus;
+               *sbus = &bd->dstbus;
        } else if (!(cctl & PL080_CONTROL_SRC_INCR)) {
-               *mbus = dst_bus;
-               *sbus = src_bus;
+               *mbus = &bd->dstbus;
+               *sbus = &bd->srcbus;
        } else {
-               if (dst_bus->buswidth == 4) {
-                       *mbus = dst_bus;
-                       *sbus = src_bus;
-               } else if (src_bus->buswidth == 4) {
-                       *mbus = src_bus;
-                       *sbus = dst_bus;
-               } else if (dst_bus->buswidth == 2) {
-                       *mbus = dst_bus;
-                       *sbus = src_bus;
-               } else if (src_bus->buswidth == 2) {
-                       *mbus = src_bus;
-                       *sbus = dst_bus;
+               if (bd->dstbus.buswidth == 4) {
+                       *mbus = &bd->dstbus;
+                       *sbus = &bd->srcbus;
+               } else if (bd->srcbus.buswidth == 4) {
+                       *mbus = &bd->srcbus;
+                       *sbus = &bd->dstbus;
+               } else if (bd->dstbus.buswidth == 2) {
+                       *mbus = &bd->dstbus;
+                       *sbus = &bd->srcbus;
+               } else if (bd->srcbus.buswidth == 2) {
+                       *mbus = &bd->srcbus;
+                       *sbus = &bd->dstbus;
                } else {
-                       /* src_bus->buswidth == 1 */
-                       *mbus = dst_bus;
-                       *sbus = src_bus;
+                       /* bd->srcbus.buswidth == 1 */
+                       *mbus = &bd->dstbus;
+                       *sbus = &bd->srcbus;
                }
        }
 }
@@ -521,29 +528,29 @@ static void pl08x_choose_master_bus(struct pl08x_bus_data *src_bus,
  * Fills in one LLI for a certain transfer descriptor
  * and advance the counter
  */
-static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x,
-       struct pl08x_txd *txd, int num_llis, int len, u32 cctl, u32 *remainder)
+static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd,
+       int num_llis, int len, u32 cctl)
 {
-       struct pl08x_lli *llis_va = txd->llis_va;
-       dma_addr_t llis_bus = txd->llis_bus;
+       struct pl08x_lli *llis_va = bd->txd->llis_va;
+       dma_addr_t llis_bus = bd->txd->llis_bus;
 
        BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS);
 
        llis_va[num_llis].cctl = cctl;
-       llis_va[num_llis].src = txd->srcbus.addr;
-       llis_va[num_llis].dst = txd->dstbus.addr;
+       llis_va[num_llis].src = bd->srcbus.addr;
+       llis_va[num_llis].dst = bd->dstbus.addr;
        llis_va[num_llis].lli = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli);
-       if (pl08x->lli_buses & PL08X_AHB2)
+       if (bd->pl08x->lli_buses & PL08X_AHB2)
                llis_va[num_llis].lli |= PL080_LLI_LM_AHB2;
 
        if (cctl & PL080_CONTROL_SRC_INCR)
-               txd->srcbus.addr += len;
+               bd->srcbus.addr += len;
        if (cctl & PL080_CONTROL_DST_INCR)
-               txd->dstbus.addr += len;
+               bd->dstbus.addr += len;
 
-       BUG_ON(*remainder < len);
+       BUG_ON(bd->remainder < len);
 
-       *remainder -= len;
+       bd->remainder -= len;
 }
 
 /*
@@ -567,7 +574,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
                              struct pl08x_txd *txd)
 {
        struct pl08x_bus_data *mbus, *sbus;
-       size_t remainder;
+       struct pl08x_lli_build_data bd;
        int num_llis = 0;
        u32 cctl;
        size_t max_bytes_per_lli;
@@ -586,38 +593,43 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
        /* Get the default CCTL */
        cctl = txd->cctl;
 
+       bd.txd = txd;
+       bd.pl08x = pl08x;
+       bd.srcbus.addr = txd->srcbus.addr;
+       bd.dstbus.addr = txd->dstbus.addr;
+
        /* Find maximum width of the source bus */
-       txd->srcbus.maxwidth =
+       bd.srcbus.maxwidth =
                pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_SWIDTH_MASK) >>
                                       PL080_CONTROL_SWIDTH_SHIFT);
 
        /* Find maximum width of the destination bus */
-       txd->dstbus.maxwidth =
+       bd.dstbus.maxwidth =
                pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_DWIDTH_MASK) >>
                                       PL080_CONTROL_DWIDTH_SHIFT);
 
        /* Set up the bus widths to the maximum */
-       txd->srcbus.buswidth = txd->srcbus.maxwidth;
-       txd->dstbus.buswidth = txd->dstbus.maxwidth;
+       bd.srcbus.buswidth = bd.srcbus.maxwidth;
+       bd.dstbus.buswidth = bd.dstbus.maxwidth;
        dev_vdbg(&pl08x->adev->dev,
                 "%s source bus is %d bytes wide, dest bus is %d bytes wide\n",
-                __func__, txd->srcbus.buswidth, txd->dstbus.buswidth);
+                __func__, bd.srcbus.buswidth, bd.dstbus.buswidth);
 
 
        /*
         * Bytes transferred == tsize * MIN(buswidths), not max(buswidths)
         */
-       max_bytes_per_lli = min(txd->srcbus.buswidth, txd->dstbus.buswidth) *
+       max_bytes_per_lli = min(bd.srcbus.buswidth, bd.dstbus.buswidth) *
                PL080_CONTROL_TRANSFER_SIZE_MASK;
        dev_vdbg(&pl08x->adev->dev,
                 "%s max bytes per lli = %zu\n",
                 __func__, max_bytes_per_lli);
 
        /* We need to count this down to zero */
-       remainder = txd->len;
+       bd.remainder = txd->len;
        dev_vdbg(&pl08x->adev->dev,
                 "%s remainder = %zu\n",
-                __func__, remainder);
+                __func__, bd.remainder);
 
        /*
         * Choose bus to align to
@@ -625,22 +637,20 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
         * - if fixed address on one bus chooses other
         * - modifies cctl to choose an appropriate master
         */
-       pl08x_choose_master_bus(&txd->srcbus, &txd->dstbus,
-                               &mbus, &sbus, cctl);
+       pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl);
 
        if (txd->len < mbus->buswidth) {
                /*
                 * Less than a bus width available
                 * - send as single bytes
                 */
-               while (remainder) {
+               while (bd.remainder) {
                        dev_vdbg(&pl08x->adev->dev,
                                 "%s single byte LLIs for a transfer of "
                                 "less than a bus width (remain 0x%08x)\n",
-                                __func__, remainder);
+                                __func__, bd.remainder);
                        cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
-                       pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, 1,
-                                       cctl, &remainder);
+                       pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
                        total_bytes++;
                }
        } else {
@@ -652,10 +662,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
                        dev_vdbg(&pl08x->adev->dev,
                                "%s adjustment lli for less than bus width "
                                 "(remain 0x%08x)\n",
-                                __func__, remainder);
+                                __func__, bd.remainder);
                        cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
-                       pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, 1,
-                                       cctl, &remainder);
+                       pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
                        total_bytes++;
                }
 
@@ -675,14 +684,14 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
                 * Make largest possible LLIs until less than one bus
                 * width left
                 */
-               while (remainder > (mbus->buswidth - 1)) {
+               while (bd.remainder > (mbus->buswidth - 1)) {
                        size_t lli_len, target_len, tsize, odd_bytes;
 
                        /*
                         * If enough left try to send max possible,
                         * otherwise try to send the remainder
                         */
-                       target_len = min(remainder, max_bytes_per_lli);
+                       target_len = min(bd.remainder, max_bytes_per_lli);
 
                        /*
                         * Set bus lengths for incrementing buses to the
@@ -690,24 +699,24 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
                         * limiting on the target length calculated above.
                         */
                        if (cctl & PL080_CONTROL_SRC_INCR)
-                               txd->srcbus.fill_bytes =
-                                       pl08x_pre_boundary(txd->srcbus.addr,
+                               bd.srcbus.fill_bytes =
+                                       pl08x_pre_boundary(bd.srcbus.addr,
                                                target_len);
                        else
-                               txd->srcbus.fill_bytes = target_len;
+                               bd.srcbus.fill_bytes = target_len;
 
                        if (cctl & PL080_CONTROL_DST_INCR)
-                               txd->dstbus.fill_bytes =
-                                       pl08x_pre_boundary(txd->dstbus.addr,
+                               bd.dstbus.fill_bytes =
+                                       pl08x_pre_boundary(bd.dstbus.addr,
                                                target_len);
                        else
-                               txd->dstbus.fill_bytes = target_len;
+                               bd.dstbus.fill_bytes = target_len;
 
                        /* Find the nearest */
-                       lli_len = min(txd->srcbus.fill_bytes,
-                               txd->dstbus.fill_bytes);
+                       lli_len = min(bd.srcbus.fill_bytes,
+                                     bd.dstbus.fill_bytes);
 
-                       BUG_ON(lli_len > remainder);
+                       BUG_ON(lli_len > bd.remainder);
 
                        if (lli_len <= 0) {
                                dev_err(&pl08x->adev->dev,
@@ -764,15 +773,15 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
                                }
 
                                cctl = pl08x_cctl_bits(cctl,
-                                                      txd->srcbus.buswidth,
-                                                      txd->dstbus.buswidth,
+                                                      bd.srcbus.buswidth,
+                                                      bd.dstbus.buswidth,
                                                       tsize);
 
                                dev_vdbg(&pl08x->adev->dev,
                                        "%s fill lli with single lli chunk of size 0x%08zx (remainder 0x%08zx)\n",
-                                       __func__, lli_len, remainder);
-                               pl08x_fill_lli_for_desc(pl08x, txd, num_llis++,
-                                               lli_len, cctl, &remainder);
+                                       __func__, lli_len, bd.remainder);
+                               pl08x_fill_lli_for_desc(&bd, num_llis++,
+                                       lli_len, cctl);
                                total_bytes += lli_len;
                        }
 
@@ -784,14 +793,13 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
                                 */
                                int j;
                                for (j = 0; (j < mbus->buswidth)
-                                               && (remainder); j++) {
+                                               && (bd.remainder); j++) {
                                        cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
                                        dev_vdbg(&pl08x->adev->dev,
                                                "%s align with boundary, single byte (remain 0x%08zx)\n",
-                                               __func__, remainder);
-                                       pl08x_fill_lli_for_desc(pl08x, txd,
-                                                       num_llis++, 1, cctl,
-                                                       &remainder);
+                                               __func__, bd.remainder);
+                                       pl08x_fill_lli_for_desc(&bd,
+                                               num_llis++, 1, cctl);
                                        total_bytes++;
                                }
                        }
@@ -800,13 +808,12 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
                /*
                 * Send any odd bytes
                 */
-               while (remainder) {
+               while (bd.remainder) {
                        cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
                        dev_vdbg(&pl08x->adev->dev,
                                "%s align with boundary, single odd byte (remain %zu)\n",
-                               __func__, remainder);
-                       pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, 1,
-                                       cctl, &remainder);
+                               __func__, bd.remainder);
+                       pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
                        total_bytes++;
                }
        }