net: phy: Use tab for indentation in Kconfig

Using tabs instead of space for indentation.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 8c919203291a8fa81c534c6cadd81ff4e5a32a31..5afe6fdcc968ee73a974613ae11ce2485cc65eb0 100644 (file)
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -5,7 +5,7 @@
 menuconfig MDIO_DEVICE
        tristate "MDIO bus device drivers"
        help
-          MDIO devices and driver infrastructure code.
+         MDIO devices and driver infrastructure code.
 
 config MDIO_BUS
        tristate
@@ -117,11 +117,11 @@ config MDIO_I2C
          This is library mode.
 
 config MDIO_MOXART
-        tristate "MOXA ART MDIO interface support"
-        depends on ARCH_MOXART
-        help
-          This driver supports the MDIO interface found in the network
-          interface units of the MOXA ART SoC
+       tristate "MOXA ART MDIO interface support"
+       depends on ARCH_MOXART
+       help
+         This driver supports the MDIO interface found in the network
+         interface units of the MOXA ART SoC
 
 config MDIO_OCTEON
        tristate "Octeon and some ThunderX SOCs MDIO buses"
@@ -192,7 +192,7 @@ config LED_TRIGGER_PHY
          state change will trigger the events, for consumption by an
          LED class driver.  There are triggers for each link speed currently
          supported by the phy, and are of the form:
-              <mii bus id>:<phy>:<speed>
+             <mii bus id>:<phy>:<speed>
 
          Where speed is in the form:
                <Speed in megabits>Mbps or <Speed in gigabits>Gbps
@@ -211,9 +211,9 @@ config AMD_PHY
          Currently supports the am79c874
 
 config AQUANTIA_PHY
-        tristate "Aquantia PHYs"
-        ---help---
-          Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
+       tristate "Aquantia PHYs"
+       ---help---
+         Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
 
 config AT803X_PHY
        tristate "AT803X PHYs"
@@ -382,21 +382,21 @@ config STE10XP
          This is the driver for the STe100p and STe101p PHYs.
 
 config TERANETICS_PHY
-        tristate "Teranetics PHYs"
-        ---help---
-          Currently supports the Teranetics TN2020
+       tristate "Teranetics PHYs"
+       ---help---
+         Currently supports the Teranetics TN2020
 
 config VITESSE_PHY
-        tristate "Vitesse PHYs"
-        ---help---
-          Currently supports the vsc8244
+       tristate "Vitesse PHYs"
+       ---help---
+         Currently supports the vsc8244
 
 config XILINX_GMII2RGMII
-       tristate "Xilinx GMII2RGMII converter driver"
-       ---help---
-         This driver support xilinx GMII to RGMII IP core it provides
-         the Reduced Gigabit Media Independent Interface(RGMII) between
-         Ethernet physical media devices and the Gigabit Ethernet controller.
+       tristate "Xilinx GMII2RGMII converter driver"
+       ---help---
+         This driver support xilinx GMII to RGMII IP core it provides
+         the Reduced Gigabit Media Independent Interface(RGMII) between
+         Ethernet physical media devices and the Gigabit Ethernet controller.
 
 endif # PHYLIB