ARM: dts: omap3-n9: Use OMAP3_CORE1_IOPAD pinmux macro

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index e9ee1df0e467291ca49757225d6dcd0b2a61705d..a2c2b8d8dd2c70a2ab5a8007b0cc2e24faeaafd0 100644 (file)
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -36,12 +36,12 @@
 &omap3_pmx_core {
        mmc2_pins: pinmux_mmc2_pins {
                pinctrl-single,pins = <
-                       0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
-                       0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
-                       0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
-                       0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
-                       0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
-                       0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+                       OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+                       OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+                       OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+                       OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+                       OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+                       OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
                >;
        };
 };