[MIPS] Au1xx0 code sets incorrect mips_hpt_frequency
authorSergei Shtylyov <sshtylyov@ru.mvista.com>
Sun, 3 Sep 2006 18:17:10 +0000 (22:17 +0400)
committerRalf Baechle <ralf@linux-mips.org>
Mon, 30 Oct 2006 21:41:26 +0000 (21:41 +0000)
Alchemy CPU counter ticks at the full CPU clock speed.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/au1000/common/time.c

index 94f09194d63d636381cba295f41a031e3c4ac9d6..7313ef234d8c4decb8da26c41b45553729c1e20c 100644 (file)
@@ -231,7 +231,6 @@ wakeup_counter0_set(int ticks)
  */
 unsigned long cal_r4koff(void)
 {
-       unsigned long count;
        unsigned long cpu_speed;
        unsigned long flags;
        unsigned long counter;
@@ -258,7 +257,7 @@ unsigned long cal_r4koff(void)
 
 #if defined(CONFIG_AU1000_USE32K)
                {
-                       unsigned long start, end;
+                       unsigned long start, end, count;
 
                        start = au_readl(SYS_RTCREAD);
                        start += 2;
@@ -282,7 +281,6 @@ unsigned long cal_r4koff(void)
 #else
                cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) *
                        AU1000_SRC_CLK;
-               count = cpu_speed / 2;
 #endif
        }
        else {
@@ -291,10 +289,9 @@ unsigned long cal_r4koff(void)
                 * NOTE: some old silicon doesn't allow reading the PLL.
                 */
                cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
-               count = cpu_speed / 2;
                no_au1xxx_32khz = 1;
        }
-       mips_hpt_frequency = count;
+       mips_hpt_frequency = cpu_speed;
        // Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16)
        set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
        spin_unlock_irqrestore(&time_lock, flags);