ixgbe: Fix backplane flow control autoneg
authorPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Wed, 30 Sep 2009 12:07:38 +0000 (12:07 +0000)
committerDavid S. Miller <davem@davemloft.net>
Thu, 1 Oct 2009 03:02:55 +0000 (20:02 -0700)
Backplane flow control autonegotiation is currently broken for
ixgbe devices.  This patch fixes the flow control issues
with clause 37 autoneg.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ixgbe/ixgbe_82598.c
drivers/net/ixgbe/ixgbe_common.c
drivers/net/ixgbe/ixgbe_type.h

index 56b12f3192f1d5b18d72b77bb03aab9807708b5f..e2d5343f127553d7ad7c5d4b032bd087f66db990 100644 (file)
@@ -425,7 +425,7 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 #endif /* CONFIG_DCB */
        default:
                hw_dbg(hw, "Flow control param set incorrectly\n");
-               ret_val = -IXGBE_ERR_CONFIG;
+               ret_val = IXGBE_ERR_CONFIG;
                goto out;
                break;
        }
index 6621e172df3d79533e391777bb2cb0e78050e75a..143b0fcbe958198f2eae17dcdd43bbfeff7ce1fb 100644 (file)
@@ -1663,7 +1663,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
 #endif /* CONFIG_DCB */
        default:
                hw_dbg(hw, "Flow control param set incorrectly\n");
-               ret_val = -IXGBE_ERR_CONFIG;
+               ret_val = IXGBE_ERR_CONFIG;
                goto out;
                break;
        }
@@ -1734,75 +1734,140 @@ s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw)
        s32 ret_val = 0;
        ixgbe_link_speed speed;
        u32 pcs_anadv_reg, pcs_lpab_reg, linkstat;
+       u32 links2, anlp1_reg, autoc_reg, links;
        bool link_up;
 
        /*
         * AN should have completed when the cable was plugged in.
         * Look for reasons to bail out.  Bail out if:
         * - FC autoneg is disabled, or if
-        * - we don't have multispeed fiber, or if
-        * - we're not running at 1G, or if
-        * - link is not up, or if
-        * - link is up but AN did not complete, or if
-        * - link is up and AN completed but timed out
+        * - link is not up.
         *
-        * Since we're being called from an LSC, link is already know to be up.
+        * Since we're being called from an LSC, link is already known to be up.
         * So use link_up_wait_to_complete=false.
         */
        hw->mac.ops.check_link(hw, &speed, &link_up, false);
-       linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
-
-       if (hw->fc.disable_fc_autoneg ||
-           !hw->phy.multispeed_fiber ||
-           (speed != IXGBE_LINK_SPEED_1GB_FULL) ||
-           !link_up ||
-           ((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
-           ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
+
+       if (hw->fc.disable_fc_autoneg || (!link_up)) {
                hw->fc.fc_was_autonegged = false;
                hw->fc.current_mode = hw->fc.requested_mode;
-               hw_dbg(hw, "Autoneg FC was skipped.\n");
                goto out;
        }
 
+       /*
+        * On backplane, bail out if
+        * - backplane autoneg was not completed, or if
+        * - link partner is not AN enabled
+        */
+       if (hw->phy.media_type == ixgbe_media_type_backplane) {
+               links = IXGBE_READ_REG(hw, IXGBE_LINKS);
+               links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2);
+               if (((links & IXGBE_LINKS_KX_AN_COMP) == 0) ||
+                   ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0)) {
+                       hw->fc.fc_was_autonegged = false;
+                       hw->fc.current_mode = hw->fc.requested_mode;
+                       goto out;
+               }
+       }
+
+       /*
+        * On multispeed fiber at 1g, bail out if
+        * - link is up but AN did not complete, or if
+        * - link is up and AN completed but timed out
+        */
+       if (hw->phy.multispeed_fiber && (speed == IXGBE_LINK_SPEED_1GB_FULL)) {
+               linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
+               if (((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
+                   ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
+                       hw->fc.fc_was_autonegged = false;
+                       hw->fc.current_mode = hw->fc.requested_mode;
+                       goto out;
+               }
+       }
+
        /*
         * Read the AN advertisement and LP ability registers and resolve
         * local flow control settings accordingly
         */
-       pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
-       pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
-       if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-               (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE)) {
+       if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
+           (hw->phy.media_type != ixgbe_media_type_backplane)) {
+               pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+               pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
+               if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+                   (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE)) {
+                       /*
+                        * Now we need to check if the user selected Rx ONLY
+                        * of pause frames.  In this case, we had to advertise
+                        * FULL flow control because we could not advertise RX
+                        * ONLY. Hence, we must now check to see if we need to
+                        * turn OFF the TRANSMISSION of PAUSE frames.
+                        */
+                       if (hw->fc.requested_mode == ixgbe_fc_full) {
+                               hw->fc.current_mode = ixgbe_fc_full;
+                               hw_dbg(hw, "Flow Control = FULL.\n");
+                       } else {
+                               hw->fc.current_mode = ixgbe_fc_rx_pause;
+                               hw_dbg(hw, "Flow Control=RX PAUSE only\n");
+                       }
+               } else if (!(pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+                          (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
+                          (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+                          (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
+                       hw->fc.current_mode = ixgbe_fc_tx_pause;
+                       hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
+               } else if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+                          (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
+                          !(pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+                          (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
+                       hw->fc.current_mode = ixgbe_fc_rx_pause;
+                       hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
+               } else {
+                       hw->fc.current_mode = ixgbe_fc_none;
+                       hw_dbg(hw, "Flow Control = NONE.\n");
+               }
+       }
+
+       if (hw->phy.media_type == ixgbe_media_type_backplane) {
                /*
-                * Now we need to check if the user selected Rx ONLY
-                * of pause frames.  In this case, we had to advertise
-                * FULL flow control because we could not advertise RX
-                * ONLY. Hence, we must now check to see if we need to
-                * turn OFF the TRANSMISSION of PAUSE frames.
+                * Read the 10g AN autoc and LP ability registers and resolve
+                * local flow control settings accordingly
                 */
-               if (hw->fc.requested_mode == ixgbe_fc_full) {
-                       hw->fc.current_mode = ixgbe_fc_full;
-                       hw_dbg(hw, "Flow Control = FULL.\n");
-               } else {
+               autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+               anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+
+               if ((autoc_reg & IXGBE_AUTOC_SYM_PAUSE) &&
+                   (anlp1_reg & IXGBE_ANLP1_SYM_PAUSE)) {
+                       /*
+                        * Now we need to check if the user selected Rx ONLY
+                        * of pause frames.  In this case, we had to advertise
+                        * FULL flow control because we could not advertise RX
+                        * ONLY. Hence, we must now check to see if we need to
+                        * turn OFF the TRANSMISSION of PAUSE frames.
+                        */
+                       if (hw->fc.requested_mode == ixgbe_fc_full) {
+                               hw->fc.current_mode = ixgbe_fc_full;
+                               hw_dbg(hw, "Flow Control = FULL.\n");
+                       } else {
+                               hw->fc.current_mode = ixgbe_fc_rx_pause;
+                               hw_dbg(hw, "Flow Control=RX PAUSE only\n");
+                       }
+               } else if (!(autoc_reg & IXGBE_AUTOC_SYM_PAUSE) &&
+                          (autoc_reg & IXGBE_AUTOC_ASM_PAUSE) &&
+                          (anlp1_reg & IXGBE_ANLP1_SYM_PAUSE) &&
+                          (anlp1_reg & IXGBE_ANLP1_ASM_PAUSE)) {
+                       hw->fc.current_mode = ixgbe_fc_tx_pause;
+                       hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
+               } else if ((autoc_reg & IXGBE_AUTOC_SYM_PAUSE) &&
+                          (autoc_reg & IXGBE_AUTOC_ASM_PAUSE) &&
+                          !(anlp1_reg & IXGBE_ANLP1_SYM_PAUSE) &&
+                          (anlp1_reg & IXGBE_ANLP1_ASM_PAUSE)) {
                        hw->fc.current_mode = ixgbe_fc_rx_pause;
                        hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
+               } else {
+                       hw->fc.current_mode = ixgbe_fc_none;
+                       hw_dbg(hw, "Flow Control = NONE.\n");
                }
-       } else if (!(pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-                  (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
-                  (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-                  (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
-               hw->fc.current_mode = ixgbe_fc_tx_pause;
-               hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
-       } else if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-                  (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
-                  !(pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-                  (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
-               hw->fc.current_mode = ixgbe_fc_rx_pause;
-               hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
-       } else {
-               hw->fc.current_mode = ixgbe_fc_none;
-               hw_dbg(hw, "Flow Control = NONE.\n");
        }
-
        /* Record that current_mode is the result of a successful autoneg */
        hw->fc.fc_was_autonegged = true;
 
@@ -1919,7 +1984,7 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
 #endif /* CONFIG_DCB */
        default:
                hw_dbg(hw, "Flow control param set incorrectly\n");
-               ret_val = -IXGBE_ERR_CONFIG;
+               ret_val = IXGBE_ERR_CONFIG;
                goto out;
                break;
        }
@@ -1927,9 +1992,6 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
        IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg);
        reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
 
-       /* Enable and restart autoneg to inform the link partner */
-       reg |= IXGBE_PCS1GLCTL_AN_ENABLE | IXGBE_PCS1GLCTL_AN_RESTART;
-
        /* Disable AN timeout */
        if (hw->fc.strict_ieee)
                reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN;
@@ -1937,6 +1999,70 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
        IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg);
        hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg);
 
+       /*
+        * Set up the 10G flow control advertisement registers so the HW
+        * can do fc autoneg once the cable is plugged in.  If we end up
+        * using 1g instead, this is harmless.
+        */
+       reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+       /*
+        * The possible values of fc.requested_mode are:
+        * 0: Flow control is completely disabled
+        * 1: Rx flow control is enabled (we can receive pause frames,
+        *    but not send pause frames).
+        * 2: Tx flow control is enabled (we can send pause frames but
+        *    we do not support receiving pause frames).
+        * 3: Both Rx and Tx flow control (symmetric) are enabled.
+        * other: Invalid.
+        */
+       switch (hw->fc.requested_mode) {
+       case ixgbe_fc_none:
+               /* Flow control completely disabled by software override. */
+               reg &= ~(IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE);
+               break;
+       case ixgbe_fc_rx_pause:
+               /*
+                * Rx Flow control is enabled and Tx Flow control is
+                * disabled by software override. Since there really
+                * isn't a way to advertise that we are capable of RX
+                * Pause ONLY, we will advertise that we support both
+                * symmetric and asymmetric Rx PAUSE.  Later, we will
+                * disable the adapter's ability to send PAUSE frames.
+                */
+               reg |= (IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE);
+               break;
+       case ixgbe_fc_tx_pause:
+               /*
+                * Tx Flow control is enabled, and Rx Flow control is
+                * disabled by software override.
+                */
+               reg |= (IXGBE_AUTOC_ASM_PAUSE);
+               reg &= ~(IXGBE_AUTOC_SYM_PAUSE);
+               break;
+       case ixgbe_fc_full:
+               /* Flow control (both Rx and Tx) is enabled by SW override. */
+               reg |= (IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE);
+               break;
+#ifdef CONFIG_DCB
+       case ixgbe_fc_pfc:
+               goto out;
+               break;
+#endif /* CONFIG_DCB */
+       default:
+               hw_dbg(hw, "Flow control param set incorrectly\n");
+               ret_val = IXGBE_ERR_CONFIG;
+               goto out;
+               break;
+       }
+       /*
+        * AUTOC restart handles negotiation of 1G and 10G. There is
+        * no need to set the PCS1GCTL register.
+        */
+       reg |= IXGBE_AUTOC_AN_RESTART;
+       IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg);
+       hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg);
+
 out:
        return ret_val;
 }
@@ -2000,7 +2126,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
 
        while (timeout) {
                if (ixgbe_get_eeprom_semaphore(hw))
-                       return -IXGBE_ERR_SWFW_SYNC;
+                       return IXGBE_ERR_SWFW_SYNC;
 
                gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
                if (!(gssr & (fwmask | swmask)))
@@ -2017,7 +2143,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
 
        if (!timeout) {
                hw_dbg(hw, "Driver can't access resource, GSSR timeout.\n");
-               return -IXGBE_ERR_SWFW_SYNC;
+               return IXGBE_ERR_SWFW_SYNC;
        }
 
        gssr |= swmask;
index 8761d7899f7d0704440d4bb3766bc671e4043750..7c93e923bf2e1fd2346969eb9625b4867d6407a9 100644 (file)
 #define IXGBE_AUTOC_KX4_SUPP    0x80000000
 #define IXGBE_AUTOC_KX_SUPP     0x40000000
 #define IXGBE_AUTOC_PAUSE       0x30000000
+#define IXGBE_AUTOC_ASM_PAUSE   0x20000000
+#define IXGBE_AUTOC_SYM_PAUSE   0x10000000
 #define IXGBE_AUTOC_RF          0x08000000
 #define IXGBE_AUTOC_PD_TMR      0x06000000
 #define IXGBE_AUTOC_AN_RX_LOOSE 0x01000000
 #define IXGBE_LINK_UP_TIME      90 /* 9.0 Seconds */
 #define IXGBE_AUTO_NEG_TIME     45 /* 4.5 Seconds */
 
+#define IXGBE_LINKS2_AN_SUPPORTED   0x00000040
+
 /* PCS1GLSTA Bit Masks */
 #define IXGBE_PCS1GLSTA_LINK_OK         1
 #define IXGBE_PCS1GLSTA_SYNK_OK         0x10
 #define IXGBE_PCS1GLCTL_AN_ENABLE       0x10000
 #define IXGBE_PCS1GLCTL_AN_RESTART      0x20000
 
+/* ANLP1 Bit Masks */
+#define IXGBE_ANLP1_PAUSE               0x0C00
+#define IXGBE_ANLP1_SYM_PAUSE           0x0400
+#define IXGBE_ANLP1_ASM_PAUSE           0x0800
+
 /* SW Semaphore Register bitmasks */
 #define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
 #define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */