--- /dev/null
+/*
+ * Intel 3000/3010 Memory Controller kernel module
+ * Copyright (C) 2007 Akamai Technologies, Inc.
+ * Shamelessly copied from:
+ * Intel D82875P Memory Controller kernel module
+ * (C) 2003 Linux Networx (http://lnxi.com)
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include "edac_core.h"
+
+#define I3000_REVISION "1.1"
+
+#define EDAC_MOD_STR "i3000_edac"
+
+#define I3000_RANKS 8
+#define I3000_RANKS_PER_CHANNEL 4
+#define I3000_CHANNELS 2
+
+/* Intel 3000 register addresses - device 0 function 0 - DRAM Controller */
+
+#define I3000_MCHBAR 0x44 /* MCH Memory Mapped Register BAR */
+#define I3000_MCHBAR_MASK 0xffffc000
+#define I3000_MMR_WINDOW_SIZE 16384
+
+#define I3000_EDEAP 0x70 /* Extended DRAM Error Address Pointer (8b)
+ *
+ * 7:1 reserved
+ * 0 bit 32 of address
+ */
+#define I3000_DEAP 0x58 /* DRAM Error Address Pointer (32b)
+ *
+ * 31:7 address
+ * 6:1 reserved
+ * 0 Error channel 0/1
+ */
+#define I3000_DEAP_GRAIN (1 << 7)
+#define I3000_DEAP_PFN(edeap, deap) ((((edeap) & 1) << (32 - PAGE_SHIFT)) | \
+ ((deap) >> PAGE_SHIFT))
+#define I3000_DEAP_OFFSET(deap) ((deap) & ~(I3000_DEAP_GRAIN-1) & ~PAGE_MASK)
+#define I3000_DEAP_CHANNEL(deap) ((deap) & 1)
+
+#define I3000_DERRSYN 0x5c /* DRAM Error Syndrome (8b)
+ *
+ * 7:0 DRAM ECC Syndrome
+ */
+
+#define I3000_ERRSTS 0xc8 /* Error Status Register (16b)
+ *
+ * 15:12 reserved
+ * 11 MCH Thermal Sensor Event for SMI/SCI/SERR
+ * 10 reserved
+ * 9 LOCK to non-DRAM Memory Flag (LCKF)
+ * 8 Received Refresh Timeout Flag (RRTOF)
+ * 7:2 reserved
+ * 1 Multiple-bit DRAM ECC Error Flag (DMERR)
+ * 0 Single-bit DRAM ECC Error Flag (DSERR)
+ */
+#define I3000_ERRSTS_BITS 0x0b03 /* bits which indicate errors */
+#define I3000_ERRSTS_UE 0x0002
+#define I3000_ERRSTS_CE 0x0001
+
+#define I3000_ERRCMD 0xca /* Error Command (16b)
+ *
+ * 15:12 reserved
+ * 11 SERR on MCH Thermal Sensor Event (TSESERR)
+ * 10 reserved
+ * 9 SERR on LOCK to non-DRAM Memory (LCKERR)
+ * 8 SERR on DRAM Refresh Timeout (DRTOERR)
+ * 7:2 reserved
+ * 1 SERR Multiple-Bit DRAM ECC Error (DMERR)
+ * 0 SERR on Single-Bit ECC Error (DSERR)
+ */
+
+/* Intel MMIO register space - device 0 function 0 - MMR space */
+
+#define I3000_DRB_SHIFT 25 /* 32MiB grain */
+
+#define I3000_C0DRB 0x100 /* Channel 0 DRAM Rank Boundary (8b x 4)
+ *
+ * 7:0 Channel 0 DRAM Rank Boundary Address
+ */
+#define I3000_C1DRB 0x180 /* Channel 1 DRAM Rank Boundary (8b x 4)
+ *
+ * 7:0 Channel 1 DRAM Rank Boundary Address
+ */
+
+#define I3000_C0DRA 0x108 /* Channel 0 DRAM Rank Attribute (8b x 2)
+ *
+ * 7 reserved
+ * 6:4 DRAM odd Rank Attribute
+ * 3 reserved
+ * 2:0 DRAM even Rank Attribute
+ *
+ * Each attribute defines the page
+ * size of the corresponding rank:
+ * 000: unpopulated
+ * 001: reserved
+ * 010: 4 KB
+ * 011: 8 KB
+ * 100: 16 KB
+ * Others: reserved
+ */
+#define I3000_C1DRA 0x188 /* Channel 1 DRAM Rank Attribute (8b x 2) */
+#define ODD_RANK_ATTRIB(dra) (((dra) & 0x70) >> 4)
+#define EVEN_RANK_ATTRIB(dra) ((dra) & 0x07)
+
+#define I3000_C0DRC0 0x120 /* DRAM Controller Mode 0 (32b)
+ *
+ * 31:30 reserved
+ * 29 Initialization Complete (IC)
+ * 28:11 reserved
+ * 10:8 Refresh Mode Select (RMS)
+ * 7 reserved
+ * 6:4 Mode Select (SMS)
+ * 3:2 reserved
+ * 1:0 DRAM Type (DT)
+ */
+
+#define I3000_C0DRC1 0x124 /* DRAM Controller Mode 1 (32b)
+ *
+ * 31 Enhanced Addressing Enable (ENHADE)
+ * 30:0 reserved
+ */
+
+
+enum i3000p_chips {
+ I3000 = 0,
+};
+
+struct i3000_dev_info {
+ const char *ctl_name;
+};
+
+struct i3000_error_info {
+ u16 errsts;
+ u8 derrsyn;
+ u8 edeap;
+ u32 deap;
+ u16 errsts2;
+};
+
+static const struct i3000_dev_info i3000_devs[] = {
+ [I3000] = {
+ .ctl_name = "i3000"
+ },
+};
+
+static struct pci_dev *mci_pdev = NULL;
+static int i3000_registered = 1;
+
+static void i3000_get_error_info(struct mem_ctl_info *mci,
+ struct i3000_error_info *info)
+{
+ struct pci_dev *pdev;
+
+ pdev = to_pci_dev(mci->dev);
+
+ /*
+ * This is a mess because there is no atomic way to read all the
+ * registers at once and the registers can transition from CE being
+ * overwritten by UE.
+ */
+ pci_read_config_word(pdev, I3000_ERRSTS, &info->errsts);
+ if (!(info->errsts & I3000_ERRSTS_BITS))
+ return;
+ pci_read_config_byte(pdev, I3000_EDEAP, &info->edeap);
+ pci_read_config_dword(pdev, I3000_DEAP, &info->deap);
+ pci_read_config_byte(pdev, I3000_DERRSYN, &info->derrsyn);
+ pci_read_config_word(pdev, I3000_ERRSTS, &info->errsts2);
+
+ /*
+ * If the error is the same for both reads then the first set
+ * of reads is valid. If there is a change then there is a CE
+ * with no info and the second set of reads is valid and
+ * should be UE info.
+ */
+ if ((info->errsts ^ info->errsts2) & I3000_ERRSTS_BITS) {
+ pci_read_config_byte(pdev, I3000_EDEAP,
+ &info->edeap);
+ pci_read_config_dword(pdev, I3000_DEAP,
+ &info->deap);
+ pci_read_config_byte(pdev, I3000_DERRSYN,
+ &info->derrsyn);
+ }
+
+ /* Clear any error bits.
+ * (Yes, we really clear bits by writing 1 to them.)
+ */
+ pci_write_bits16(pdev, I3000_ERRSTS, I3000_ERRSTS_BITS, I3000_ERRSTS_BITS);
+}
+
+static int i3000_process_error_info(struct mem_ctl_info *mci,
+ struct i3000_error_info *info, int handle_errors)
+{
+ int row, multi_chan;
+ int pfn, offset, channel;
+
+ multi_chan = mci->csrows[0].nr_channels - 1;
+
+ if (!(info->errsts & I3000_ERRSTS_BITS))
+ return 0;
+
+ if (!handle_errors)
+ return 1;
+
+ if ((info->errsts ^ info->errsts2) & I3000_ERRSTS_BITS) {
+ edac_mc_handle_ce_no_info(mci, "UE overwrote CE");
+ info->errsts = info->errsts2;
+ }
+
+ pfn = I3000_DEAP_PFN(info->edeap, info->deap);
+ offset = I3000_DEAP_OFFSET(info->deap);
+ channel = I3000_DEAP_CHANNEL(info->deap);
+
+ row = edac_mc_find_csrow_by_page(mci, pfn);
+
+ if (info->errsts & I3000_ERRSTS_UE)
+ edac_mc_handle_ue(mci, pfn, offset, row, "i3000 UE");
+ else
+ edac_mc_handle_ce(mci, pfn, offset, info->derrsyn, row,
+ multi_chan ? channel : 0,
+ "i3000 CE");
+
+ return 1;
+}
+
+static void i3000_check(struct mem_ctl_info *mci)
+{
+ struct i3000_error_info info;
+
+ debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
+ i3000_get_error_info(mci, &info);
+ i3000_process_error_info(mci, &info, 1);
+}
+
+static int i3000_is_interleaved(const unsigned char *c0dra,
+ const unsigned char *c1dra,
+ const unsigned char *c0drb,
+ const unsigned char *c1drb)
+{
+ int i;
+
+ /* If the channels aren't populated identically then
+ * we're not interleaved.
+ */
+ for (i = 0; i < I3000_RANKS_PER_CHANNEL / 2; i++)
+ if (ODD_RANK_ATTRIB(c0dra[i]) != ODD_RANK_ATTRIB(c1dra[i]) ||
+ EVEN_RANK_ATTRIB(c0dra[i]) != EVEN_RANK_ATTRIB(c1dra[i]))
+ return 0;
+
+ /* If the rank boundaries for the two channels are different
+ * then we're not interleaved.
+ */
+ for (i = 0; i < I3000_RANKS_PER_CHANNEL; i++)
+ if (c0drb[i] != c1drb[i])
+ return 0;
+
+ return 1;
+}
+
+static int i3000_probe1(struct pci_dev *pdev, int dev_idx)
+{
+ int rc;
+ int i;
+ struct mem_ctl_info *mci = NULL;
+ unsigned long last_cumul_size;
+ int interleaved, nr_channels;
+ unsigned char dra[I3000_RANKS / 2], drb[I3000_RANKS];
+ unsigned char *c0dra = dra, *c1dra = &dra[I3000_RANKS_PER_CHANNEL / 2];
+ unsigned char *c0drb = drb, *c1drb = &drb[I3000_RANKS_PER_CHANNEL];
+ unsigned long mchbar;
+ void *window;
+
+ debugf0("MC: %s()\n", __func__);
+
+ pci_read_config_dword(pdev, I3000_MCHBAR, (u32 *)&mchbar);
+ mchbar &= I3000_MCHBAR_MASK;
+ window = ioremap_nocache(mchbar, I3000_MMR_WINDOW_SIZE);
+ if (!window) {
+ printk(KERN_ERR "i3000: cannot map mmio space at 0x%lx\n", mchbar);
+ return -ENODEV;
+ }
+
+ c0dra[0] = readb(window + I3000_C0DRA + 0); /* ranks 0,1 */
+ c0dra[1] = readb(window + I3000_C0DRA + 1); /* ranks 2,3 */
+ c1dra[0] = readb(window + I3000_C1DRA + 0); /* ranks 0,1 */
+ c1dra[1] = readb(window + I3000_C1DRA + 1); /* ranks 2,3 */
+
+ for (i = 0; i < I3000_RANKS_PER_CHANNEL; i++) {
+ c0drb[i] = readb(window + I3000_C0DRB + i);
+ c1drb[i] = readb(window + I3000_C1DRB + i);
+ }
+
+ iounmap(window);
+
+ /* Figure out how many channels we have.
+ *
+ * If we have what the datasheet calls "asymmetric channels"
+ * (essentially the same as what was called "virtual single
+ * channel mode" in the i82875) then it's a single channel as
+ * far as EDAC is concerned.
+ */
+ interleaved = i3000_is_interleaved(c0dra, c1dra, c0drb, c1drb);
+ nr_channels = interleaved ? 2 : 1;
+ mci = edac_mc_alloc(0, I3000_RANKS / nr_channels, nr_channels);
+ if (!mci)
+ return -ENOMEM;
+
+ debugf3("MC: %s(): init mci\n", __func__);
+
+ mci->dev = &pdev->dev;
+ mci->mtype_cap = MEM_FLAG_DDR2;
+
+ mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+ mci->edac_cap = EDAC_FLAG_SECDED;
+
+ mci->mod_name = EDAC_MOD_STR;
+ mci->mod_ver = I3000_REVISION;
+ mci->ctl_name = i3000_devs[dev_idx].ctl_name;
+ mci->dev_name = pci_name(pdev);
+ mci->edac_check = i3000_check;
+ mci->ctl_page_to_phys = NULL;
+
+ /*
+ * The dram rank boundary (DRB) reg values are boundary addresses
+ * for each DRAM rank with a granularity of 32MB. DRB regs are
+ * cumulative; the last one will contain the total memory
+ * contained in all ranks.
+ *
+ * If we're in interleaved mode then we're only walking through
+ * the ranks of controller 0, so we double all the values we see.
+ */
+ for (last_cumul_size = i = 0; i < mci->nr_csrows; i++) {
+ u8 value;
+ u32 cumul_size;
+ struct csrow_info *csrow = &mci->csrows[i];
+
+ value = drb[i];
+ cumul_size = value << (I3000_DRB_SHIFT - PAGE_SHIFT);
+ if (interleaved)
+ cumul_size <<= 1;
+ debugf3("MC: %s(): (%d) cumul_size 0x%x\n",
+ __func__, i, cumul_size);
+ if (cumul_size == last_cumul_size) {
+ csrow->mtype = MEM_EMPTY;
+ continue;
+ }
+
+ csrow->first_page = last_cumul_size;
+ csrow->last_page = cumul_size - 1;
+ csrow->nr_pages = cumul_size - last_cumul_size;
+ last_cumul_size = cumul_size;
+ csrow->grain = I3000_DEAP_GRAIN;
+ csrow->mtype = MEM_DDR2;
+ csrow->dtype = DEV_UNKNOWN;
+ csrow->edac_mode = EDAC_UNKNOWN;
+ }
+
+ /* Clear any error bits.
+ * (Yes, we really clear bits by writing 1 to them.)
+ */
+ pci_write_bits16(pdev, I3000_ERRSTS, I3000_ERRSTS_BITS, I3000_ERRSTS_BITS);
+
+ rc = -ENODEV;
+ if (edac_mc_add_mc(mci, 0)) {
+ debugf3("MC: %s(): failed edac_mc_add_mc()\n", __func__);
+ goto fail;
+ }
+
+ /* get this far and it's successful */
+ debugf3("MC: %s(): success\n", __func__);
+ return 0;
+
+ fail:
+ if (mci)
+ edac_mc_free(mci);
+
+ return rc;
+}
+
+/* returns count (>= 0), or negative on error */
+static int __devinit i3000_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int rc;
+
+ debugf0("MC: %s()\n", __func__);
+
+ if (pci_enable_device(pdev) < 0)
+ return -EIO;
+
+ rc = i3000_probe1(pdev, ent->driver_data);
+ if (mci_pdev == NULL)
+ mci_pdev = pci_dev_get(pdev);
+
+ return rc;
+}
+
+static void __devexit i3000_remove_one(struct pci_dev *pdev)
+{
+ struct mem_ctl_info *mci;
+
+ debugf0("%s()\n", __func__);
+
+ if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
+ return;
+
+ edac_mc_free(mci);
+}
+
+static const struct pci_device_id i3000_pci_tbl[] __devinitdata = {
+ {
+ PCI_VEND_DEV(INTEL, 3000_HB), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ I3000
+ },
+ {
+ 0,
+ } /* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i3000_pci_tbl);
+
+static struct pci_driver i3000_driver = {
+ .name = EDAC_MOD_STR,
+ .probe = i3000_init_one,
+ .remove = __devexit_p(i3000_remove_one),
+ .id_table = i3000_pci_tbl,
+};
+
+static int __init i3000_init(void)
+{
+ int pci_rc;
+
+ debugf3("MC: %s()\n", __func__);
+ pci_rc = pci_register_driver(&i3000_driver);
+ if (pci_rc < 0)
+ goto fail0;
+
+ if (mci_pdev == NULL) {
+ i3000_registered = 0;
+ mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_3000_HB, NULL);
+ if (!mci_pdev) {
+ debugf0("i3000 pci_get_device fail\n");
+ pci_rc = -ENODEV;
+ goto fail1;
+ }
+
+ pci_rc = i3000_init_one(mci_pdev, i3000_pci_tbl);
+ if (pci_rc < 0) {
+ debugf0("i3000 init fail\n");
+ pci_rc = -ENODEV;
+ goto fail1;
+ }
+ }
+
+ return 0;
+
+fail1:
+ pci_unregister_driver(&i3000_driver);
+
+fail0:
+ if (mci_pdev)
+ pci_dev_put(mci_pdev);
+
+ return pci_rc;
+}
+
+static void __exit i3000_exit(void)
+{
+ debugf3("MC: %s()\n", __func__);
+
+ pci_unregister_driver(&i3000_driver);
+ if (!i3000_registered) {
+ i3000_remove_one(mci_pdev);
+ pci_dev_put(mci_pdev);
+ }
+}
+
+module_init(i3000_init);
+module_exit(i3000_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Akamai Technologies Arthur Ulfeldt/Jason Uhlenkott");
+MODULE_DESCRIPTION("MC support for Intel 3000 memory hub controllers");
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff