ARM: OMAP2+: Add GPMC DT support for Ethernet child nodes
authorJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Thu, 14 Mar 2013 21:54:11 +0000 (22:54 +0100)
committerJon Hunter <jon-hunter@ti.com>
Thu, 4 Apr 2013 01:13:42 +0000 (20:13 -0500)
Besides being used to interface with external memory devices,
the General-Purpose Memory Controller can be used to connect
Pseudo-SRAM devices such as ethernet controllers to OMAP2+
processors using the TI GPMC as a data bus.

This patch allows an ethernet chip to be defined as an GPMC
child device node.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Documentation/devicetree/bindings/net/gpmc-eth.txt [new file with mode: 0644]
arch/arm/mach-omap2/gpmc.c

diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt
new file mode 100644 (file)
index 0000000..24cb4e4
--- /dev/null
@@ -0,0 +1,97 @@
+Device tree bindings for Ethernet chip connected to TI GPMC
+
+Besides being used to interface with external memory devices, the
+General-Purpose Memory Controller can be used to connect Pseudo-SRAM devices
+such as ethernet controllers to processors using the TI GPMC as a data bus.
+
+Ethernet controllers connected to TI GPMC are represented as child nodes of
+the GPMC controller with an "ethernet" name.
+
+All timing relevant properties as well as generic GPMC child properties are
+explained in a separate documents. Please refer to
+Documentation/devicetree/bindings/bus/ti-gpmc.txt
+
+For the properties relevant to the ethernet controller connected to the GPMC
+refer to the binding documentation of the device. For example, the documentation
+for the SMSC 911x is Documentation/devicetree/bindings/net/smsc911x.txt
+
+Child nodes need to specify the GPMC bus address width using the "bank-width"
+property but is possible that an ethernet controller also has a property to
+specify the I/O registers address width. Even when the GPMC has a maximum 16-bit
+address width, it supports devices with 32-bit word registers.
+For example with an SMSC LAN911x/912x controller connected to the TI GPMC on an
+OMAP2+ board, "bank-width = <2>;" and "reg-io-width = <4>;".
+
+Required properties:
+- bank-width:          Address width of the device in bytes. GPMC supports 8-bit
+                       and 16-bit devices and so must be either 1 or 2 bytes.
+- compatible:          Compatible string property for the ethernet child device.
+- gpmc,cs-on:          Chip-select assertion time
+- gpmc,cs-rd-off:      Chip-select de-assertion time for reads
+- gpmc,cs-wr-off:      Chip-select de-assertion time for writes
+- gpmc,oe-on:          Output-enable assertion time
+- gpmc,oe-off          Output-enable de-assertion time
+- gpmc,we-on:          Write-enable assertion time
+- gpmc,we-off:         Write-enable de-assertion time
+- gpmc,access:         Start cycle to first data capture (read access)
+- gpmc,rd-cycle:       Total read cycle time
+- gpmc,wr-cycle:       Total write cycle time
+- reg:                 Chip-select, base address (relative to chip-select)
+                       and size of the memory mapped for the device.
+                       Note that base address will be typically 0 as this
+                       is the start of the chip-select.
+
+Optional properties:
+- gpmc,XXX             Additional GPMC timings and settings parameters. See
+                       Documentation/devicetree/bindings/bus/ti-gpmc.txt
+
+Example:
+
+gpmc: gpmc@6e000000 {
+       compatible = "ti,omap3430-gpmc";
+       ti,hwmods = "gpmc";
+       reg = <0x6e000000 0x1000>;
+       interrupts = <20>;
+       gpmc,num-cs = <8>;
+       gpmc,num-waitpins = <4>;
+       #address-cells = <2>;
+       #size-cells = <1>;
+
+       ranges = <5 0 0x2c000000 0x1000000>;
+
+       ethernet@5,0 {
+               compatible = "smsc,lan9221", "smsc,lan9115";
+               reg = <5 0 0xff>;
+               bank-width = <2>;
+
+               gpmc,mux-add-data;
+               gpmc,cs-on = <0>;
+               gpmc,cs-rd-off = <186>;
+               gpmc,cs-wr-off = <186>;
+               gpmc,adv-on = <12>;
+               gpmc,adv-rd-off = <48>;
+               gpmc,adv-wr-off = <48>;
+               gpmc,oe-on = <54>;
+               gpmc,oe-off = <168>;
+               gpmc,we-on = <54>;
+               gpmc,we-off = <168>;
+               gpmc,rd-cycle = <186>;
+               gpmc,wr-cycle = <186>;
+               gpmc,access = <114>;
+               gpmc,page-burst-access = <6>;
+               gpmc,bus-turnaround = <12>;
+               gpmc,cycle2cycle-delay = <18>;
+               gpmc,wr-data-mux-bus = <90>;
+               gpmc,wr-access = <186>;
+               gpmc,cycle2cycle-samecsen;
+               gpmc,cycle2cycle-diffcsen;
+
+               interrupt-parent = <&gpio6>;
+               interrupts = <16>;
+               vmmc-supply = <&vddvario>;
+               vmmc_aux-supply = <&vdd33a>;
+               reg-io-width = <4>;
+
+               smsc,save-mac-address;
+       };
+};
index 8a1cafb2750ea96fe7d2716a50345ffcfb2da2e2..ed946df5ad8a6acd75bb9010843eac90b3d4480c 100644 (file)
@@ -1544,6 +1544,14 @@ static int gpmc_probe_dt(struct platform_device *pdev)
                }
        }
 
+       for_each_node_by_name(child, "ethernet") {
+               ret = gpmc_probe_generic_child(pdev, child);
+               if (ret < 0) {
+                       of_node_put(child);
+                       return ret;
+               }
+       }
+
        return 0;
 }
 #else