--- /dev/null
+/*
+ * MPC8572 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <24 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <24 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8572-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8572-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+ memory-controller@6000 {
+ compatible = "fsl,mpc8572-memory-controller";
+ reg = <0x6000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-dma-1.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+ gpio-controller@f000 {
+ compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8572-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x100000>; // L2,1M
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+ ptp_clock@24e00 {
+ interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
+ };
+
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-etsec1-3.dtsi"
+/include/ "pq3-sec3.0-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8572-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
--- /dev/null
+/*
+ * MPC8572 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8572";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8572@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,8572@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8572si-pre.dtsi"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8572@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,8572@1 {
- device_type = "cpu";
- reg = <0x1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ board_lbc: lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
0x1 0x0 0x0 0xe0000000 0x08000000
0x4 0x0 0x0 0xffa40000 0x00040000
0x5 0x0 0x0 0xffa80000 0x00040000
0x6 0x0 0x0 0xffac0000 0x00040000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
-
- ramdisk@0 {
- reg = <0x0 0x03000000>;
- read-only;
- };
-
- diagnostic@3000000 {
- reg = <0x03000000 0x00e00000>;
- read-only;
- };
-
- dink@3e00000 {
- reg = <0x03e00000 0x00200000>;
- read-only;
- };
-
- kernel@4000000 {
- reg = <0x04000000 0x00400000>;
- read-only;
- };
-
- jffs2@4400000 {
- reg = <0x04400000 0x03b00000>;
- };
-
- dtb@7f00000 {
- reg = <0x07f00000 0x00080000>;
- read-only;
- };
-
- u-boot@7f80000 {
- reg = <0x07f80000 0x00080000>;
- read-only;
- };
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- u-boot@0 {
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- jffs2@2000000 {
- reg = <0x02000000 0x10000000>;
- };
-
- ramdisk@12000000 {
- reg = <0x12000000 0x08000000>;
- read-only;
- };
-
- kernel@1a000000 {
- reg = <0x1a000000 0x04000000>;
- };
-
- dtb@1e000000 {
- reg = <0x1e000000 0x01000000>;
- read-only;
- };
-
- empty@1f000000 {
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- nand@4,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x4 0x0 0x40000>;
- };
-
- nand@5,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x5 0x0 0x40000>;
- };
-
- nand@6,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x6 0x0 0x40000>;
- };
};
- soc8572@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
+ board_soc: soc: soc8572@ffe00000 {
ranges = <0x0 0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8572-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- memory-controller@6000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x6000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x100000>; // L2, 1M
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- ptp_clock@24E00 {
- compatible = "fsl,etsec-ptp";
- reg = <0x24E00 0xB0>;
- interrupts = <68 2 69 2 70 2 71 2>;
- interrupt-parent = < &mpic >;
- fsl,tclk-period = <5>;
- fsl,tmr-prsc = <200>;
- fsl,tmr-add = <0xAAAAAAAB>;
- fsl,tmr-fiper1 = <0x3B9AC9FB>;
- fsl,tmr-fiper2 = <0x3B9AC9FB>;
- fsl,max-adj = <499999999>;
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x3>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi3>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8572-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
};
- pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
+ board_pci0: pci0: pcie@ffe08000 {
reg = <0 0xffe08000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
- >;
-
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
-
};
pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
};
pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
};
};
};
+
+/*
+ * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572ds.dtsi"
--- /dev/null
+/*
+ * MPC8572DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ ramdisk@0 {
+ reg = <0x0 0x03000000>;
+ read-only;
+ };
+
+ diagnostic@3000000 {
+ reg = <0x03000000 0x00e00000>;
+ read-only;
+ };
+
+ dink@3e00000 {
+ reg = <0x03e00000 0x00200000>;
+ read-only;
+ };
+
+ kernel@4000000 {
+ reg = <0x04000000 0x00400000>;
+ read-only;
+ };
+
+ jffs2@4400000 {
+ reg = <0x04400000 0x03b00000>;
+ };
+
+ dtb@7f00000 {
+ reg = <0x07f00000 0x00080000>;
+ read-only;
+ };
+
+ u-boot@7f80000 {
+ reg = <0x07f80000 0x00080000>;
+ read-only;
+ };
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x2 0x0 0x40000>;
+
+ u-boot@0 {
+ reg = <0x0 0x02000000>;
+ read-only;
+ };
+
+ jffs2@2000000 {
+ reg = <0x02000000 0x10000000>;
+ };
+
+ ramdisk@12000000 {
+ reg = <0x12000000 0x08000000>;
+ read-only;
+ };
+
+ kernel@1a000000 {
+ reg = <0x1a000000 0x04000000>;
+ };
+
+ dtb@1e000000 {
+ reg = <0x1e000000 0x01000000>;
+ read-only;
+ };
+
+ empty@1f000000 {
+ reg = <0x1f000000 0x21000000>;
+ };
+ };
+
+ nand@4,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x4 0x0 0x40000>;
+ };
+
+ nand@5,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x5 0x0 0x40000>;
+ };
+
+ nand@6,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x6 0x0 0x40000>;
+ };
+};
+
+&board_soc {
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 1 0 0>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <10 1 0 0>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <10 1 0 0>;
+ reg = <0x2>;
+ };
+ phy3: ethernet-phy@3 {
+ interrupts = <10 1 0 0>;
+ reg = <0x3>;
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ ptp_clock@24e00 {
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <200>;
+ fsl,tmr-add = <0xAAAAAAAB>;
+ fsl,tmr-fiper1 = <0x3B9AC9FB>;
+ fsl,tmr-fiper2 = <0x3B9AC9FB>;
+ fsl,max-adj = <499999999>;
+ };
+
+ enet1: ethernet@25000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+
+ };
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet3: ethernet@27000 {
+ tbi-handle = <&tbi3>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@27520 {
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+};
+
+&board_pci0 {
+ pcie@0 {
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x11 func 0 - PCI slot 1 */
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 1 - PCI slot 1 */
+ 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 2 - PCI slot 1 */
+ 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 3 - PCI slot 1 */
+ 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 4 - PCI slot 1 */
+ 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 5 - PCI slot 1 */
+ 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 6 - PCI slot 1 */
+ 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 7 - PCI slot 1 */
+ 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x12 func 0 - PCI slot 2 */
+ 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 1 - PCI slot 2 */
+ 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 2 - PCI slot 2 */
+ 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 3 - PCI slot 2 */
+ 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 4 - PCI slot 2 */
+ 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 5 - PCI slot 2 */
+ 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 6 - PCI slot 2 */
+ 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 7 - PCI slot 2 */
+ 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ // IDSEL 0x1c USB
+ 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+ 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+ 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+ 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+ >;
+
+
+ uli1575@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <9 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0x0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <0x1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+
+ gpio@400 {
+ reg = <0x1 0x400 0x80>;
+ };
+ };
+ };
+ };
+};
/*
- * MPC8572 DS Device Tree Source
+ * MPC8572DS Device Tree Source (36-bit address map)
*
* Copyright 2007-2009 Freescale Semiconductor Inc.
*
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8572si-pre.dtsi"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8572@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,8572@1 {
- device_type = "cpu";
- reg = <0x1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
- localbus@fffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ board_lbc: lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
0x4 0x0 0xf 0xffa40000 0x00040000
0x5 0x0 0xf 0xffa80000 0x00040000
0x6 0x0 0xf 0xffac0000 0x00040000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
-
- ramdisk@0 {
- reg = <0x0 0x03000000>;
- read-only;
- };
-
- diagnostic@3000000 {
- reg = <0x03000000 0x00e00000>;
- read-only;
- };
-
- dink@3e00000 {
- reg = <0x03e00000 0x00200000>;
- read-only;
- };
-
- kernel@4000000 {
- reg = <0x04000000 0x00400000>;
- read-only;
- };
-
- jffs2@4400000 {
- reg = <0x04400000 0x03b00000>;
- };
-
- dtb@7f00000 {
- reg = <0x07f00000 0x00080000>;
- read-only;
- };
-
- u-boot@7f80000 {
- reg = <0x07f80000 0x00080000>;
- read-only;
- };
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- u-boot@0 {
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- jffs2@2000000 {
- reg = <0x02000000 0x10000000>;
- };
-
- ramdisk@12000000 {
- reg = <0x12000000 0x08000000>;
- read-only;
- };
-
- kernel@1a000000 {
- reg = <0x1a000000 0x04000000>;
- };
-
- dtb@1e000000 {
- reg = <0x1e000000 0x01000000>;
- read-only;
- };
-
- empty@1f000000 {
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- nand@4,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x4 0x0 0x40000>;
- };
-
- nand@5,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x5 0x0 0x40000>;
- };
-
- nand@6,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x6 0x0 0x40000>;
- };
};
- soc8572@fffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
+ board_soc: soc: soc8572@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8572-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- memory-controller@6000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x6000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x100000>; // L2, 1M
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x3>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi3>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8572-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
};
- pci0: pcie@fffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
+ board_pci0: pci0: pcie@fffe08000 {
reg = <0xf 0xffe08000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
- >;
-
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0xe0000000
- 0x2000000 0x0 0xe0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
-
};
pci1: pcie@fffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
};
pci2: pcie@fffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
};
};
};
+
+/*
+ * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572ds.dtsi"
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc8572ds.dts"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- pci0 = &pci0;
- pci1 = &pci1;
- };
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
PowerPC,8572@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
};
-
+ PowerPC,8572@1 {
+ status = "disabled";
+ };
};
- memory {
- device_type = "memory";
- reg = <0x0 0x0>; // Filled by U-Boot
+ localbus@ffe05000 {
+ status = "disabled";
};
soc8572@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
+ serial@4600 {
+ status = "disabled";
};
-
- ecm@1000 {
- compatible = "fsl,mpc8572-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ dma@c300 {
+ status = "disabled";
};
-
- memory-controller@2000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ gpio-controller@f000 {
};
-
- memory-controller@6000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x6000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
+ l2-cache-controller@20000 {
cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
};
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
+ ethernet@26000 {
+ status = "disabled";
};
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
+ mdio@26520 {
+ status = "disabled";
};
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
+ ethernet@27000 {
+ status = "disabled";
};
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- };
+ mdio@27520 {
+ status = "disabled";
};
-
- enet1: ethernet@25000 {
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
+ pic@40000 {
+ protected-sources = <
+ 31 32 33 37 38 39 /* enet2 enet3 */
+ 76 77 78 79 26 42 /* dma2 pci2 serial*/
+ 0xe4 0xe5 0xe6 0xe7 /* msi */
+ >;
};
msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
msi-available-ranges = <0 0x80>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8572-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- protected-sources = <
- 31 32 33 37 38 39 /* enet2 enet3 */
- 76 77 78 79 26 42 /* dma2 pci2 serial*/
- 0xe4 0xe5 0xe6 0xe7 /* msi */
- >;
};
- };
-
- pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe08000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
- >;
-
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
+ timer@42100 {
+ status = "disabled";
};
-
};
-
- pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe09000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- };
+ pcie@ffe0a000 {
+ status = "disabled";
};
};
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc8572ds.dts"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- pci2 = &pci2;
- };
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
+ PowerPC,8572@0 {
+ status = "disabled";
+ };
PowerPC,8572@1 {
- device_type = "cpu";
- reg = <0x1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
};
};
- memory {
- device_type = "memory";
- reg = <0x0 0x0>; // Filled by U-Boot
+ localbus@ffe05000 {
+ status = "disabled";
};
soc8572@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
+ ecm-law@0 {
+ status = "disabled";
};
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
+ ecm@1000 {
+ status = "disabled";
+ };
+ memory-controller@2000 {
+ status = "disabled";
+ };
+ memory-controller@6000 {
+ status = "disabled";
+ };
+ i2c@3000 {
+ status = "disabled";
+ };
+ i2c@3100 {
+ status = "disabled";
+ };
+ serial@4500 {
+ status = "disabled";
+ };
+ gpio-controller@f000 {
+ status = "disabled";
+ };
+ l2-cache-controller@20000 {
+ cache-size = <0x80000>; // L2, 512K
+ };
+ dma@21300 {
+ status = "disabled";
+ };
+ ethernet@24000 {
+ status = "disabled";
};
-
mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- reg = <0x3>;
- };
+ status = "disabled";
};
-
- enet2: ethernet@26000 {
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
+ ptp_clock@24e00 {
+ status = "disabled";
};
-
- enet3: ethernet@27000 {
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
+ ethernet@25000 {
+ status = "disabled";
};
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0x80 0x80>;
- interrupts = <
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
+ mdio@25520 {
+ status = "disabled";
};
-
- serial0: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
+ crypto@30000 {
+ status = "disabled";
};
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
+ pic@40000 {
protected-sources = <
18 16 10 42 45 58 /* MEM L2 mdio serial crypto */
29 30 34 35 36 40 /* enet0 enet1 */
0xe0 0xe1 0xe2 0xe3 /* msi */
>;
};
- };
-
- pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe0a000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
+ timer@41100 {
+ status = "disabled";
};
+ msi@41600 {
+ msi-available-ranges = <0x80 0x80>;
+ interrupts = <
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ };
+ global-utilities@e0000 {
+ status = "disabled";
+ };
+ };
+ pcie@ffe08000 {
+ status = "disabled";
+ };
+ pcie@ffe09000 {
+ status = "disabled";
};
};
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff