staging: cxt1e1: fix checkpatch errors with open brace '{'
authorDaeseok Youn <daeseok.youn@gmail.com>
Mon, 3 Mar 2014 00:00:57 +0000 (09:00 +0900)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 5 Mar 2014 00:30:43 +0000 (16:30 -0800)
clean up checkpatch.pl error:
 ERROR: that open brace { should be on the previous line

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/cxt1e1/hwprobe.c

index 5f0e05dc587b4d00a37b7e6b890334bcdd4cac26..d87a011360bddc3faed1c50fd160a910e55ba628 100644 (file)
@@ -58,8 +58,7 @@ show_two(hdw_info_t *hi, int brdno)
 
        ci = (ci_t *)(netdev_priv(hi->ndev));
        bid = sbeid_get_bdname(ci);
-       switch (hi->promfmt)
-       {
+       switch (hi->promfmt) {
        case PROM_FORMAT_TYPE1:
                memcpy(sn, (FLD_TYPE1 *)(hi->mfg_info.pft1.Serial), 6);
                break;
@@ -159,8 +158,7 @@ prep_hdw_info(void)
        hdw_info_t *hi;
        int         i;
 
-       for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
-       {
+       for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++) {
                hi->pci_busno = 0xff;
                hi->pci_slot = 0xff;
                hi->pci_pin[0] = 0;
@@ -179,18 +177,15 @@ cleanup_ioremap(void)
        hdw_info_t *hi;
        int         i;
 
-       for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
-       {
+       for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++) {
                if (hi->pci_slot == 0xff)
                        break;
-               if (hi->addr_mapped[0])
-               {
+               if (hi->addr_mapped[0]) {
                        iounmap((void *)(hi->addr_mapped[0]));
                        release_mem_region((long) hi->addr[0], hi->len[0]);
                        hi->addr_mapped[0] = 0;
                }
-               if (hi->addr_mapped[1])
-               {
+               if (hi->addr_mapped[1]) {
                        iounmap((void *)(hi->addr_mapped[1]));
                        release_mem_region((long) hi->addr[1], hi->len[1]);
                        hi->addr_mapped[1] = 0;
@@ -205,8 +200,7 @@ cleanup_devs(void)
        hdw_info_t *hi;
        int         i;
 
-       for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
-       {
+       for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++) {
                if (hi->pci_slot == 0xff || !hi->ndev)
                        break;
                c4_stopwd(netdev_priv(hi->ndev));
@@ -252,8 +246,7 @@ c4_hdw_init(struct pci_dev *pdev, int found)
         * element, identified by "slot==(0xff)".  The second part of a board's
         * functionality will match the previously loaded slot/busno.
         */
-       for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
-       {
+       for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++) {
                /*
                 * match with board's first found interface, otherwise this is
                 * fisrt found
@@ -262,17 +255,19 @@ c4_hdw_init(struct pci_dev *pdev, int found)
                    ((hi->pci_slot == slot) && (hi->bus == pdev->bus)))
                        break;                  /* found for-loop exit */
        }
-       if (i == MAX_BOARDS)            /* no match in above loop means MAX
-                                        * exceeded */
-       {
+
+       /* no match in above loop means MAX exceeded */
+       if (i == MAX_BOARDS) {
                pr_warning("exceeded number of allowed devices (>%d)?\n",
                           MAX_BOARDS);
                return 0;
        }
+
        if (pdev->bus)
                hi->pci_busno = pdev->bus->number;
        else
                hi->pci_busno = 0; /* default for system PCI inconsistency */
+
        hi->pci_slot = slot;
        pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &hi->pci_pin[fun]);
        pci_read_config_byte(pdev, PCI_REVISION_ID, &hi->revid[fun]);
@@ -311,43 +306,38 @@ c4hw_attach_all(void)
        /*** scan PCI bus for all possible boards */
        while ((pdev = pci_get_device(PCI_VENDOR_ID_CONEXANT,
                                      PCI_DEVICE_ID_CN8474,
-                                     pdev)))
-       {
+                                     pdev))) {
                if (c4_hdw_init(pdev, found))
                        found++;
        }
-       if (!found)
-       {
+
+       if (!found) {
                pr_warning("No boards found\n");
                return -ENODEV;
        }
+
        /* sanity check for consistent hardware found */
-       for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
-       {
-               if (hi->pci_slot != 0xff && (!hi->addr[0] || !hi->addr[1]))
-               {
+       for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++) {
+               if (hi->pci_slot != 0xff && (!hi->addr[0] || !hi->addr[1])) {
                        pr_warning("%s: something very wrong with pci_get_device\n",
                                   hi->devname);
                        return -EIO;
                }
        }
        /* bring board's memory regions on/line */
-       for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
-       {
+       for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++) {
                if (hi->pci_slot == 0xff)
                        break;
-               for (j = 0; j < 2; j++)
-               {
-                       if (!request_mem_region(hi->addr[j], hi->len[j], hi->devname))
-                       {
+               for (j = 0; j < 2; j++) {
+                       if (!request_mem_region(hi->addr[j], hi->len[j], hi->devname)) {
                                pr_warning("%s: memory in use, addr=0x%lx, len=0x%lx ?\n",
                                           hi->devname, hi->addr[j], hi->len[j]);
                                cleanup_ioremap();
                                return -ENOMEM;
                        }
+
                        hi->addr_mapped[j] = (unsigned long)ioremap(hi->addr[j], hi->len[j]);
-                       if (!hi->addr_mapped[j])
-                       {
+                       if (!hi->addr_mapped[j]) {
                                pr_warning("%s: ioremap fails, addr=0x%lx, len=0x%lx ?\n",
                                           hi->devname, hi->addr[j], hi->len[j]);
                                cleanup_ioremap();
@@ -364,13 +354,11 @@ c4hw_attach_all(void)
        drvr_state = SBE_DRVR_AVAILABLE;
 
        /* Have now memory mapped all boards.  Now allow board's access to system */
-       for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
-       {
+       for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++) {
                if (hi->pci_slot == 0xff)
                        break;
                if (pci_enable_device(hi->pdev[0]) ||
-                   pci_enable_device(hi->pdev[1]))
-               {
+                   pci_enable_device(hi->pdev[1])) {
                        drvr_state = SBE_DRVR_DOWN;
                        pr_warning("%s: failed to enable card %d slot %d\n",
                                   hi->devname, i, hi->pci_slot);