Blackfin Serial Driver: updates kgdb over Blackfin serial driver with kgdb framework
authorSonic Zhang <sonic.zhang@analog.com>
Fri, 2 Jan 2009 13:40:14 +0000 (13:40 +0000)
committerLinus Torvalds <torvalds@linux-foundation.org>
Fri, 2 Jan 2009 18:19:34 +0000 (10:19 -0800)
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/serial/bfin_5xx.c

index 569f0e2476c690259e6234911db7c33c4998c4b9..d63fad7363b74a309cb67da29afa4782022879f4 100644 (file)
@@ -22,7 +22,8 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 
-#ifdef CONFIG_KGDB_UART
+#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
+       defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
 #include <linux/kgdb.h>
 #include <asm/irq_regs.h>
 #endif
 static struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
 static int nr_active_ports = ARRAY_SIZE(bfin_serial_resource);
 
+#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
+       defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
+
+# ifndef CONFIG_SERIAL_BFIN_PIO
+#  error KGDB only support UART in PIO mode.
+# endif
+
+static int kgdboc_port_line;
+static int kgdboc_break_enabled;
+#endif
 /*
  * Setup for console. Argument comes from the menuconfig
  */
@@ -110,9 +121,7 @@ static void bfin_serial_start_tx(struct uart_port *port)
 static void bfin_serial_stop_rx(struct uart_port *port)
 {
        struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
-#ifdef CONFIG_KGDB_UART
-       if (uart->port.line != CONFIG_KGDB_UART_PORT)
-#endif
+
        UART_CLEAR_IER(uart, ERBFI);
 }
 
@@ -123,49 +132,6 @@ static void bfin_serial_enable_ms(struct uart_port *port)
 {
 }
 
-#ifdef CONFIG_KGDB_UART
-static int kgdb_entry_state;
-
-void kgdb_put_debug_char(int chr)
-{
-       struct bfin_serial_port *uart;
-
-       if (CONFIG_KGDB_UART_PORT < 0
-               || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS)
-               uart = &bfin_serial_ports[0];
-       else
-               uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
-
-       while (!(UART_GET_LSR(uart) & THRE)) {
-               SSYNC();
-       }
-
-       UART_CLEAR_DLAB(uart);
-       UART_PUT_CHAR(uart, (unsigned char)chr);
-       SSYNC();
-}
-
-int kgdb_get_debug_char(void)
-{
-       struct bfin_serial_port *uart;
-       unsigned char chr;
-
-       if (CONFIG_KGDB_UART_PORT < 0
-               || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS)
-               uart = &bfin_serial_ports[0];
-       else
-               uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
-
-       while(!(UART_GET_LSR(uart) & DR)) {
-               SSYNC();
-       }
-       UART_CLEAR_DLAB(uart);
-       chr = UART_GET_CHAR(uart);
-       SSYNC();
-
-       return chr;
-}
-#endif
 
 #if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO)
 # define UART_GET_ANOMALY_THRESHOLD(uart)    ((uart)->anomaly_threshold)
@@ -178,7 +144,7 @@ int kgdb_get_debug_char(void)
 #ifdef CONFIG_SERIAL_BFIN_PIO
 static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
 {
-       struct tty_struct *tty = uart->port.info->port.tty;
+       struct tty_struct *tty = NULL;
        unsigned int status, ch, flg;
        static struct timeval anomaly_start = { .tv_sec = 0 };
 
@@ -188,27 +154,18 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
        ch = UART_GET_CHAR(uart);
        uart->port.icount.rx++;
 
-#ifdef CONFIG_KGDB_UART
-       if (uart->port.line == CONFIG_KGDB_UART_PORT) {
-               struct pt_regs *regs = get_irq_regs();
-               if (uart->port.cons->index == CONFIG_KGDB_UART_PORT && ch == 0x1) { /* Ctrl + A */
-                       kgdb_breakkey_pressed(regs);
-                       return;
-               } else if (kgdb_entry_state == 0 && ch == '$') {/* connection from KGDB */
-                       kgdb_entry_state = 1;
-               } else if (kgdb_entry_state == 1 && ch == 'q') {
-                       kgdb_entry_state = 0;
-                       kgdb_breakkey_pressed(regs);
+#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
+       defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
+       if (kgdb_connected && kgdboc_port_line == uart->port.line)
+               if (ch == 0x3) {/* Ctrl + C */
+                       kgdb_breakpoint();
                        return;
-               } else if (ch == 0x3) {/* Ctrl + C */
-                       kgdb_entry_state = 0;
-                       kgdb_breakkey_pressed(regs);
-                       return;
-               } else {
-                       kgdb_entry_state = 0;
                }
-       }
+
+       if (!uart->port.info || !uart->port.info->tty)
+               return;
 #endif
+       tty = uart->port.info->tty;
 
        if (ANOMALY_05000363) {
                /* The BF533 (and BF561) family of processors have a nice anomaly
@@ -630,16 +587,16 @@ static int bfin_serial_startup(struct uart_port *port)
        uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
        add_timer(&(uart->rx_dma_timer));
 #else
+#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
+       defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
+       if (kgdboc_port_line == uart->port.line && kgdboc_break_enabled)
+               kgdboc_break_enabled = 0;
+       else {
+# endif
        if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
             "BFIN_UART_RX", uart)) {
-# ifdef        CONFIG_KGDB_UART
-               if (uart->port.line != CONFIG_KGDB_UART_PORT) {
-# endif
                printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
                return -EBUSY;
-# ifdef        CONFIG_KGDB_UART
-               }
-# endif
        }
 
        if (request_irq
@@ -685,6 +642,10 @@ static int bfin_serial_startup(struct uart_port *port)
                }
        }
 # endif
+#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
+       defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
+       }
+# endif
 #endif
        UART_SET_IER(uart, ERBFI);
        return 0;
@@ -715,9 +676,6 @@ static void bfin_serial_shutdown(struct uart_port *port)
        default:
                break;
        };
-#endif
-#ifdef CONFIG_KGDB_UART
-       if (uart->port.line != CONFIG_KGDB_UART_PORT)
 #endif
        free_irq(uart->port.irq, uart);
        free_irq(uart->port.irq+1, uart);
@@ -887,6 +845,51 @@ static void bfin_serial_set_ldisc(struct uart_port *port)
        }
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr)
+{
+       struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+
+       while (!(UART_GET_LSR(uart) & THRE))
+               cpu_relax();
+
+       UART_CLEAR_DLAB(uart);
+       UART_PUT_CHAR(uart, (unsigned char)chr);
+}
+
+static int bfin_serial_poll_get_char(struct uart_port *port)
+{
+       struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+       unsigned char chr;
+
+       while (!(UART_GET_LSR(uart) & DR))
+               cpu_relax();
+
+       UART_CLEAR_DLAB(uart);
+       chr = UART_GET_CHAR(uart);
+
+       return chr;
+}
+#endif
+
+#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
+       defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
+static void bfin_kgdboc_port_shutdown(struct uart_port *port)
+{
+       if (kgdboc_break_enabled) {
+               kgdboc_break_enabled = 0;
+               bfin_serial_shutdown(port);
+       }
+}
+
+static int bfin_kgdboc_port_startup(struct uart_port *port)
+{
+       kgdboc_port_line = port->line;
+       kgdboc_break_enabled = !bfin_serial_startup(port);
+       return 0;
+}
+#endif
+
 static struct uart_ops bfin_serial_pops = {
        .tx_empty       = bfin_serial_tx_empty,
        .set_mctrl      = bfin_serial_set_mctrl,
@@ -905,6 +908,15 @@ static struct uart_ops bfin_serial_pops = {
        .request_port   = bfin_serial_request_port,
        .config_port    = bfin_serial_config_port,
        .verify_port    = bfin_serial_verify_port,
+#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
+       defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
+       .kgdboc_port_startup    = bfin_kgdboc_port_startup,
+       .kgdboc_port_shutdown   = bfin_kgdboc_port_shutdown,
+#endif
+#ifdef CONFIG_CONSOLE_POLL
+       .poll_put_char  = bfin_serial_poll_put_char,
+       .poll_get_char  = bfin_serial_poll_get_char,
+#endif
 };
 
 static void __init bfin_serial_init_ports(void)
@@ -1076,10 +1088,7 @@ static int __init bfin_serial_rs_console_init(void)
 {
        bfin_serial_init_ports();
        register_console(&bfin_serial_console);
-#ifdef CONFIG_KGDB_UART
-       kgdb_entry_state = 0;
-       init_kgdb_uart();
-#endif
+
        return 0;
 }
 console_initcall(bfin_serial_rs_console_init);
@@ -1235,10 +1244,6 @@ static struct platform_driver bfin_serial_driver = {
 static int __init bfin_serial_init(void)
 {
        int ret;
-#ifdef CONFIG_KGDB_UART
-       struct bfin_serial_port *uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
-       struct ktermios t;
-#endif
 
        pr_info("Serial: Blackfin serial driver\n");
 
@@ -1252,21 +1257,6 @@ static int __init bfin_serial_init(void)
                        uart_unregister_driver(&bfin_serial_reg);
                }
        }
-#ifdef CONFIG_KGDB_UART
-       if (uart->port.cons->index != CONFIG_KGDB_UART_PORT) {
-               request_irq(uart->port.irq, bfin_serial_rx_int,
-                       IRQF_DISABLED, "BFIN_UART_RX", uart);
-               pr_info("Request irq for kgdb uart port\n");
-               UART_SET_IER(uart, ERBFI);
-               SSYNC();
-               t.c_cflag = CS8|B57600;
-               t.c_iflag = 0;
-               t.c_oflag = 0;
-               t.c_lflag = ICANON;
-               t.c_line = CONFIG_KGDB_UART_PORT;
-               bfin_serial_set_termios(&uart->port, &t, &t);
-       }
-#endif
        return ret;
 }
 
@@ -1276,6 +1266,7 @@ static void __exit bfin_serial_exit(void)
        uart_unregister_driver(&bfin_serial_reg);
 }
 
+
 module_init(bfin_serial_init);
 module_exit(bfin_serial_exit);