[SCSI] gvp11: Use shost_priv() and kill ugly HDATA() macro

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c
index bd5d90328ee0e24788df6c02a31ba8b6f705b13b..18b7102bb80e87bf7315a125400350ec5d3e1eef 100644 (file)
--- a/drivers/scsi/gvp11.c
+++ b/drivers/scsi/gvp11.c
@@ -23,7 +23,6 @@
 
 
 #define DMA(ptr)       ((gvp11_scsiregs *)((ptr)->base))
-#define HDATA(ptr)     ((struct WD33C93_hostdata *)((ptr)->hostdata))
 
 static irqreturn_t gvp11_intr(int irq, void *_instance)
 {
@@ -50,70 +49,66 @@ void gvp11_setup(char *str, int *ints)
 
 static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
 {
+       struct Scsi_Host *instance = cmd->device->host;
+       struct WD33C93_hostdata *hdata = shost_priv(instance);
        unsigned short cntr = GVP11_DMAC_INT_ENABLE;
        unsigned long addr = virt_to_bus(cmd->SCp.ptr);
        int bank_mask;
        static int scsi_alloc_out_of_range = 0;
 
        /* use bounce buffer if the physical address is bad */
-       if (addr & HDATA(cmd->device->host)->dma_xfer_mask) {
-               HDATA(cmd->device->host)->dma_bounce_len =
-                       (cmd->SCp.this_residual + 511) & ~0x1ff;
+       if (addr & hdata->dma_xfer_mask) {
+               hdata->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
 
                if (!scsi_alloc_out_of_range) {
-                       HDATA(cmd->device->host)->dma_bounce_buffer =
-                               kmalloc(HDATA(cmd->device->host)->dma_bounce_len,
-                                       GFP_KERNEL);
-                       HDATA(cmd->device->host)->dma_buffer_pool =
-                               BUF_SCSI_ALLOCED;
+                       hdata->dma_bounce_buffer =
+                               kmalloc(hdata->dma_bounce_len, GFP_KERNEL);
+                       hdata->dma_buffer_pool = BUF_SCSI_ALLOCED;
                }
 
                if (scsi_alloc_out_of_range ||
-                   !HDATA(cmd->device->host)->dma_bounce_buffer) {
-                       HDATA(cmd->device->host)->dma_bounce_buffer =
-                               amiga_chip_alloc(HDATA(cmd->device->host)->dma_bounce_len,
+                   !hdata->dma_bounce_buffer) {
+                       hdata->dma_bounce_buffer =
+                               amiga_chip_alloc(hdata->dma_bounce_len,
                                                 "GVP II SCSI Bounce Buffer");
 
-                       if (!HDATA(cmd->device->host)->dma_bounce_buffer) {
-                               HDATA(cmd->device->host)->dma_bounce_len = 0;
+                       if (!hdata->dma_bounce_buffer) {
+                               hdata->dma_bounce_len = 0;
                                return 1;
                        }
 
-                       HDATA(cmd->device->host)->dma_buffer_pool =
-                               BUF_CHIP_ALLOCED;
+                       hdata->dma_buffer_pool = BUF_CHIP_ALLOCED;
                }
 
                /* check if the address of the bounce buffer is OK */
-               addr = virt_to_bus(HDATA(cmd->device->host)->dma_bounce_buffer);
+               addr = virt_to_bus(hdata->dma_bounce_buffer);
 
-               if (addr & HDATA(cmd->device->host)->dma_xfer_mask) {
+               if (addr & hdata->dma_xfer_mask) {
                        /* fall back to Chip RAM if address out of range */
-                       if (HDATA(cmd->device->host)->dma_buffer_pool ==
-                           BUF_SCSI_ALLOCED) {
-                               kfree(HDATA(cmd->device->host)->dma_bounce_buffer);
+                       if (hdata->dma_buffer_pool == BUF_SCSI_ALLOCED) {
+                               kfree(hdata->dma_bounce_buffer);
                                scsi_alloc_out_of_range = 1;
                        } else {
-                               amiga_chip_free(HDATA(cmd->device->host)->dma_bounce_buffer);
+                               amiga_chip_free(hdata->dma_bounce_buffer);
                        }
 
-                       HDATA(cmd->device->host)->dma_bounce_buffer =
-                               amiga_chip_alloc(HDATA(cmd->device->host)->dma_bounce_len,
+                       hdata->dma_bounce_buffer =
+                               amiga_chip_alloc(hdata->dma_bounce_len,
                                                 "GVP II SCSI Bounce Buffer");
 
-                       if (!HDATA(cmd->device->host)->dma_bounce_buffer) {
-                               HDATA(cmd->device->host)->dma_bounce_len = 0;
+                       if (!hdata->dma_bounce_buffer) {
+                               hdata->dma_bounce_len = 0;
                                return 1;
                        }
 
-                       addr = virt_to_bus(HDATA(cmd->device->host)->dma_bounce_buffer);
-                       HDATA(cmd->device->host)->dma_buffer_pool =
-                               BUF_CHIP_ALLOCED;
+                       addr = virt_to_bus(hdata->dma_bounce_buffer);
+                       hdata->dma_buffer_pool = BUF_CHIP_ALLOCED;
                }
 
                if (!dir_in) {
                        /* copy to bounce buffer for a write */
-                       memcpy(HDATA(cmd->device->host)->dma_bounce_buffer,
-                              cmd->SCp.ptr, cmd->SCp.this_residual);
+                       memcpy(hdata->dma_bounce_buffer, cmd->SCp.ptr,
+                              cmd->SCp.this_residual);
                }
        }
 
@@ -121,7 +116,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
        if (!dir_in)
                cntr |= GVP11_DMAC_DIR_WRITE;
 
-       HDATA(cmd->device->host)->dma_dir = dir_in;
+       hdata->dma_dir = dir_in;
        DMA(cmd->device->host)->CNTR = cntr;
 
        /* setup DMA *physical* address */
@@ -135,7 +130,8 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
                cache_push(addr, cmd->SCp.this_residual);
        }
 
-       if ((bank_mask = (~HDATA(cmd->device->host)->dma_xfer_mask >> 18) & 0x01c0))
+       bank_mask = (~hdata->dma_xfer_mask >> 18) & 0x01c0;
+       if (bank_mask)
                DMA(cmd->device->host)->BANK = bank_mask & (addr >> 18);
 
        /* start DMA */
@@ -148,25 +144,26 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
 static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
                     int status)
 {
+       struct WD33C93_hostdata *hdata = shost_priv(instance);
+
        /* stop DMA */
        DMA(instance)->SP_DMA = 1;
        /* remove write bit from CONTROL bits */
        DMA(instance)->CNTR = GVP11_DMAC_INT_ENABLE;
 
        /* copy from a bounce buffer, if necessary */
-       if (status && HDATA(instance)->dma_bounce_buffer) {
-               if (HDATA(instance)->dma_dir && SCpnt)
-                       memcpy(SCpnt->SCp.ptr,
-                              HDATA(instance)->dma_bounce_buffer,
+       if (status && hdata->dma_bounce_buffer) {
+               if (hdata->dma_dir && SCpnt)
+                       memcpy(SCpnt->SCp.ptr, hdata->dma_bounce_buffer,
                               SCpnt->SCp.this_residual);
 
-               if (HDATA(instance)->dma_buffer_pool == BUF_SCSI_ALLOCED)
-                       kfree(HDATA(instance)->dma_bounce_buffer);
+               if (hdata->dma_buffer_pool == BUF_SCSI_ALLOCED)
+                       kfree(hdata->dma_bounce_buffer);
                else
-                       amiga_chip_free(HDATA(instance)->dma_bounce_buffer);
+                       amiga_chip_free(hdata->dma_bounce_buffer);
 
-               HDATA(instance)->dma_bounce_buffer = NULL;
-               HDATA(instance)->dma_bounce_len = 0;
+               hdata->dma_bounce_buffer = NULL;
+               hdata->dma_bounce_len = 0;
        }
 }
 
@@ -180,6 +177,7 @@ int __init gvp11_detect(struct scsi_host_template *tpnt)
        unsigned int epc;
        struct zorro_dev *z = NULL;
        unsigned int default_dma_xfer_mask;
+       struct WD33C93_hostdata *hdata;
        wd33c93_regs regs;
        int num_gvp11 = 0;
 #ifdef CHECK_WD33C93
@@ -306,10 +304,11 @@ int __init gvp11_detect(struct scsi_host_template *tpnt)
                instance->irq = IRQ_AMIGA_PORTS;
                instance->unique_id = z->slotaddr;
 
+               hdata = shost_priv(instance);
                if (gvp11_xfer_mask)
-                       HDATA(instance)->dma_xfer_mask = gvp11_xfer_mask;
+                       hdata->dma_xfer_mask = gvp11_xfer_mask;
                else
-                       HDATA(instance)->dma_xfer_mask = default_dma_xfer_mask;
+                       hdata->dma_xfer_mask = default_dma_xfer_mask;
 
                DMA(instance)->secret2 = 1;
                DMA(instance)->secret1 = 0;
@@ -327,9 +326,9 @@ int __init gvp11_detect(struct scsi_host_template *tpnt)
                 */
                regs.SASR = &(DMA(instance)->SASR);
                regs.SCMD = &(DMA(instance)->SCMD);
-               HDATA(instance)->no_sync = 0xff;
-               HDATA(instance)->fast = 0;
-               HDATA(instance)->dma_mode = CTRL_DMA;
+               hdata->no_sync = 0xff;
+               hdata->fast = 0;
+               hdata->dma_mode = CTRL_DMA;
                wd33c93_init(instance, regs, dma_setup, dma_stop,
                             (epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10
                                                     : WD33C93_FS_12_15);