module_param(piothreshold, ushort, S_IRUGO);
MODULE_PARM_DESC(piothreshold, "size used to determine sdma vs. pio");
+#define COPY_CACHELESS 1
+#define COPY_ADAPTIVE 2
+static unsigned int sge_copy_mode;
+module_param(sge_copy_mode, uint, S_IRUGO);
+MODULE_PARM_DESC(sge_copy_mode,
+ "Verbs copy mode: 0 use memcpy, 1 use cacheless copy, 2 adapt based on WSS");
+
static void verbs_sdma_complete(
struct sdma_txreq *cookie,
int status);
/* Length of buffer to create verbs txreq cache name */
#define TXREQ_NAME_LEN 24
+static uint wss_threshold;
+module_param(wss_threshold, uint, S_IRUGO);
+MODULE_PARM_DESC(wss_threshold, "Percentage (1-100) of LLC to use as a threshold for a cacheless copy");
+static uint wss_clean_period = 256;
+module_param(wss_clean_period, uint, S_IRUGO);
+MODULE_PARM_DESC(wss_clean_period, "Count of verbs copies before an entry in the page copy table is cleaned");
+
+/* memory working set size */
+struct hfi1_wss {
+ unsigned long *entries;
+ atomic_t total_count;
+ atomic_t clean_counter;
+ atomic_t clean_entry;
+
+ int threshold;
+ int num_entries;
+ long pages_mask;
+};
+
+static struct hfi1_wss wss;
+
+int hfi1_wss_init(void)
+{
+ long llc_size;
+ long llc_bits;
+ long table_size;
+ long table_bits;
+
+ /* check for a valid percent range - default to 80 if none or invalid */
+ if (wss_threshold < 1 || wss_threshold > 100)
+ wss_threshold = 80;
+ /* reject a wildly large period */
+ if (wss_clean_period > 1000000)
+ wss_clean_period = 256;
+ /* reject a zero period */
+ if (wss_clean_period == 0)
+ wss_clean_period = 1;
+
+ /*
+ * Calculate the table size - the next power of 2 larger than the
+ * LLC size. LLC size is in KiB.
+ */
+ llc_size = wss_llc_size() * 1024;
+ table_size = roundup_pow_of_two(llc_size);
+
+ /* one bit per page in rounded up table */
+ llc_bits = llc_size / PAGE_SIZE;
+ table_bits = table_size / PAGE_SIZE;
+ wss.pages_mask = table_bits - 1;
+ wss.num_entries = table_bits / BITS_PER_LONG;
+
+ wss.threshold = (llc_bits * wss_threshold) / 100;
+ if (wss.threshold == 0)
+ wss.threshold = 1;
+
+ atomic_set(&wss.clean_counter, wss_clean_period);
+
+ wss.entries = kcalloc(wss.num_entries, sizeof(*wss.entries),
+ GFP_KERNEL);
+ if (!wss.entries) {
+ hfi1_wss_exit();
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+void hfi1_wss_exit(void)
+{
+ /* coded to handle partially initialized and repeat callers */
+ kfree(wss.entries);
+ wss.entries = NULL;
+}
+
+/*
+ * Advance the clean counter. When the clean period has expired,
+ * clean an entry.
+ *
+ * This is implemented in atomics to avoid locking. Because multiple
+ * variables are involved, it can be racy which can lead to slightly
+ * inaccurate information. Since this is only a heuristic, this is
+ * OK. Any innaccuracies will clean themselves out as the counter
+ * advances. That said, it is unlikely the entry clean operation will
+ * race - the next possible racer will not start until the next clean
+ * period.
+ *
+ * The clean counter is implemented as a decrement to zero. When zero
+ * is reached an entry is cleaned.
+ */
+static void wss_advance_clean_counter(void)
+{
+ int entry;
+ int weight;
+ unsigned long bits;
+
+ /* become the cleaner if we decrement the counter to zero */
+ if (atomic_dec_and_test(&wss.clean_counter)) {
+ /*
+ * Set, not add, the clean period. This avoids an issue
+ * where the counter could decrement below the clean period.
+ * Doing a set can result in lost decrements, slowing the
+ * clean advance. Since this a heuristic, this possible
+ * slowdown is OK.
+ *
+ * An alternative is to loop, advancing the counter by a
+ * clean period until the result is > 0. However, this could
+ * lead to several threads keeping another in the clean loop.
+ * This could be mitigated by limiting the number of times
+ * we stay in the loop.
+ */
+ atomic_set(&wss.clean_counter, wss_clean_period);
+
+ /*
+ * Uniquely grab the entry to clean and move to next.
+ * The current entry is always the lower bits of
+ * wss.clean_entry. The table size, wss.num_entries,
+ * is always a power-of-2.
+ */
+ entry = (atomic_inc_return(&wss.clean_entry) - 1)
+ & (wss.num_entries - 1);
+
+ /* clear the entry and count the bits */
+ bits = xchg(&wss.entries[entry], 0);
+ weight = hweight64((u64)bits);
+ /* only adjust the contended total count if needed */
+ if (weight)
+ atomic_sub(weight, &wss.total_count);
+ }
+}
+
+/*
+ * Insert the given address into the working set array.
+ */
+static void wss_insert(void *address)
+{
+ u32 page = ((unsigned long)address >> PAGE_SHIFT) & wss.pages_mask;
+ u32 entry = page / BITS_PER_LONG; /* assumes this ends up a shift */
+ u32 nr = page & (BITS_PER_LONG - 1);
+
+ if (!test_and_set_bit(nr, &wss.entries[entry]))
+ atomic_inc(&wss.total_count);
+
+ wss_advance_clean_counter();
+}
+
+/*
+ * Is the working set larger than the threshold?
+ */
+static inline int wss_exceeds_threshold(void)
+{
+ return atomic_read(&wss.total_count) >= wss.threshold;
+}
+
/*
* Translate ib_wr_opcode into ib_wc_opcode.
*/
struct rvt_sge *sge = &ss->sge;
int in_last = 0;
int i;
+ int cacheless_copy = 0;
+ if (sge_copy_mode == COPY_CACHELESS) {
+ cacheless_copy = length >= PAGE_SIZE;
+ } else if (sge_copy_mode == COPY_ADAPTIVE) {
+ if (length >= PAGE_SIZE) {
+ /*
+ * NOTE: this *assumes*:
+ * o The first vaddr is the dest.
+ * o If multiple pages, then vaddr is sequential.
+ */
+ wss_insert(sge->vaddr);
+ if (length >= (2 * PAGE_SIZE))
+ wss_insert(sge->vaddr + PAGE_SIZE);
+
+ cacheless_copy = wss_exceeds_threshold();
+ } else {
+ wss_advance_clean_counter();
+ }
+ }
if (copy_last) {
if (length > 8) {
length -= 8;
if (len > sge->sge_length)
len = sge->sge_length;
WARN_ON_ONCE(len == 0);
- if (in_last) {
- /* enforce byte transer ordering */
+ if (unlikely(in_last)) {
+ /* enforce byte transfer ordering */
for (i = 0; i < len; i++)
((u8 *)sge->vaddr)[i] = ((u8 *)data)[i];
+ } else if (cacheless_copy) {
+ cacheless_memcpy(sge->vaddr, data, len);
} else {
memcpy(sge->vaddr, data, len);
}
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff