x86/ACPI/cstate: Allow ACPI C1 FFH MWAIT use on AMD systems

AMD systems support the Monitor/Mwait instructions and these can be used
for ACPI C1 in the same way as on Intel systems.

Three things are needed:
 1) This patch.
 2) BIOS that declares a C1 state in _CST to use FFH, with correct values.
 3) CPUID_Fn00000005_EDX is non-zero on the system.

The BIOS on AMD systems have historically not defined a C1 state in _CST,
so the acpi_idle driver uses HALT for ACPI C1.

Currently released systems have CPUID_Fn00000005_EDX as reserved/RAZ. If a
BIOS is released for these systems that requests a C1 state with FFH, the
FFH implementation in Linux will fail since CPUID_Fn00000005_EDX is 0. The
acpi_idle driver will then fallback to using HALT for ACPI C1.

Future systems are expected to have non-zero CPUID_Fn00000005_EDX and BIOS
support for using FFH for ACPI C1.

Allow ffh_cstate_init() to succeed on AMD systems.

Tested on Fam15h and Fam17h systems.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index 8233a630280f52052ffb9a5f7c89f273cedf0425..dde437f5d14ff828dccff19275033ff2330acc60 100644 (file)
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -167,7 +167,8 @@ static int __init ffh_cstate_init(void)
 {
        struct cpuinfo_x86 *c = &boot_cpu_data;
 
-       if (c->x86_vendor != X86_VENDOR_INTEL)
+       if (c->x86_vendor != X86_VENDOR_INTEL &&
+           c->x86_vendor != X86_VENDOR_AMD)
                return -1;
 
        cpu_cstate_entry = alloc_percpu(struct cstate_entry);