micrel phy driver - updated(1)

Hello all:

This patch fixes what Ben mentioned, namely duplicated ids.

From: David J. Choi <david.choi@micrel.com>

Body of the explanation: This patch has changes as followings;
 -support the interrupt from phy devices from Micrel Inc.
 -support more phy devices, ks8737, ks8721, ks8041, ks8051 from Micrel.
 -remove vsc8201 because this device was used only internal test at Micrel.

Signed-off-by: David J. Choi <david.choi@micrel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 0692f750c404d6e78e101cad5f445f6f19f8d0fe..8bb7db676a5cc13b0651a8970fd25a27d7a79d48 100644 (file)
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -12,7 +12,8 @@
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  *
- * Support : ksz9021 , vsc8201, ks8001
+ * Support : ksz9021 1000/100/10 phy from Micrel
+ *             ks8001, ks8737, ks8721, ks8041, ks8051 100/10 phy
  */
 
 #include <linux/kernel.h>
@@ -20,37 +21,146 @@
 #include <linux/phy.h>
 
 #define        PHY_ID_KSZ9021                  0x00221611
-#define        PHY_ID_VSC8201                  0x000FC413
+#define        PHY_ID_KS8737                   0x00221720
+#define        PHY_ID_KS8041                   0x00221510
+#define        PHY_ID_KS8051                   0x00221550
+/* both for ks8001 Rev. A/B, and for ks8721 Rev 3. */
 #define        PHY_ID_KS8001                   0x0022161A
 
+/* general Interrupt control/status reg in vendor specific block. */
+#define MII_KSZPHY_INTCS                       0x1B
+#define        KSZPHY_INTCS_JABBER                     (1 << 15)
+#define        KSZPHY_INTCS_RECEIVE_ERR                (1 << 14)
+#define        KSZPHY_INTCS_PAGE_RECEIVE               (1 << 13)
+#define        KSZPHY_INTCS_PARELLEL                   (1 << 12)
+#define        KSZPHY_INTCS_LINK_PARTNER_ACK           (1 << 11)
+#define        KSZPHY_INTCS_LINK_DOWN                  (1 << 10)
+#define        KSZPHY_INTCS_REMOTE_FAULT               (1 << 9)
+#define        KSZPHY_INTCS_LINK_UP                    (1 << 8)
+#define        KSZPHY_INTCS_ALL                        (KSZPHY_INTCS_LINK_UP |\
+                                               KSZPHY_INTCS_LINK_DOWN)
+
+/* general PHY control reg in vendor specific block. */
+#define        MII_KSZPHY_CTRL                 0x1F
+/* bitmap of PHY register to set interrupt mode */
+#define KSZPHY_CTRL_INT_ACTIVE_HIGH            (1 << 9)
+#define KSZ9021_CTRL_INT_ACTIVE_HIGH           (1 << 14)
+#define KS8737_CTRL_INT_ACTIVE_HIGH            (1 << 14)
+
+static int kszphy_ack_interrupt(struct phy_device *phydev)
+{
+       /* bit[7..0] int status, which is a read and clear register. */
+       int rc;
+
+       rc = phy_read(phydev, MII_KSZPHY_INTCS);
+
+       return (rc < 0) ? rc : 0;
+}
+
+static int kszphy_set_interrupt(struct phy_device *phydev)
+{
+       int temp;
+       temp = (PHY_INTERRUPT_ENABLED == phydev->interrupts) ?
+               KSZPHY_INTCS_ALL : 0;
+       return phy_write(phydev, MII_KSZPHY_INTCS, temp);
+}
+
+static int kszphy_config_intr(struct phy_device *phydev)
+{
+       int temp, rc;
+
+       /* set the interrupt pin active low */
+       temp = phy_read(phydev, MII_KSZPHY_CTRL);
+       temp &= ~KSZPHY_CTRL_INT_ACTIVE_HIGH;
+       phy_write(phydev, MII_KSZPHY_CTRL, temp);
+       rc = kszphy_set_interrupt(phydev);
+       return rc < 0 ? rc : 0;
+}
+
+static int ksz9021_config_intr(struct phy_device *phydev)
+{
+       int temp, rc;
+
+       /* set the interrupt pin active low */
+       temp = phy_read(phydev, MII_KSZPHY_CTRL);
+       temp &= ~KSZ9021_CTRL_INT_ACTIVE_HIGH;
+       phy_write(phydev, MII_KSZPHY_CTRL, temp);
+       rc = kszphy_set_interrupt(phydev);
+       return rc < 0 ? rc : 0;
+}
+
+static int ks8737_config_intr(struct phy_device *phydev)
+{
+       int temp, rc;
+
+       /* set the interrupt pin active low */
+       temp = phy_read(phydev, MII_KSZPHY_CTRL);
+       temp &= ~KS8737_CTRL_INT_ACTIVE_HIGH;
+       phy_write(phydev, MII_KSZPHY_CTRL, temp);
+       rc = kszphy_set_interrupt(phydev);
+       return rc < 0 ? rc : 0;
+}
 
 static int kszphy_config_init(struct phy_device *phydev)
 {
        return 0;
 }
 
+static struct phy_driver ks8737_driver = {
+       .phy_id         = PHY_ID_KS8737,
+       .phy_id_mask    = 0x00fffff0,
+       .name           = "Micrel KS8737",
+       .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+       .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+       .config_init    = kszphy_config_init,
+       .config_aneg    = genphy_config_aneg,
+       .read_status    = genphy_read_status,
+       .ack_interrupt  = kszphy_ack_interrupt,
+       .config_intr    = ks8737_config_intr,
+       .driver         = { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver ks8041_driver = {
+       .phy_id         = PHY_ID_KS8041,
+       .phy_id_mask    = 0x00fffff0,
+       .name           = "Micrel KS8041",
+       .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause
+                               | SUPPORTED_Asym_Pause),
+       .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+       .config_init    = kszphy_config_init,
+       .config_aneg    = genphy_config_aneg,
+       .read_status    = genphy_read_status,
+       .ack_interrupt  = kszphy_ack_interrupt,
+       .config_intr    = kszphy_config_intr,
+       .driver         = { .owner = THIS_MODULE,},
+};
 
-static struct phy_driver ks8001_driver = {
-       .phy_id         = PHY_ID_KS8001,
-       .name           = "Micrel KS8001",
+static struct phy_driver ks8051_driver = {
+       .phy_id         = PHY_ID_KS8051,
        .phy_id_mask    = 0x00fffff0,
-       .features       = PHY_BASIC_FEATURES,
-       .flags          = PHY_POLL,
+       .name           = "Micrel KS8051",
+       .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause
+                               | SUPPORTED_Asym_Pause),
+       .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
        .config_init    = kszphy_config_init,
        .config_aneg    = genphy_config_aneg,
        .read_status    = genphy_read_status,
+       .ack_interrupt  = kszphy_ack_interrupt,
+       .config_intr    = kszphy_config_intr,
        .driver         = { .owner = THIS_MODULE,},
 };
 
-static struct phy_driver vsc8201_driver = {
-       .phy_id         = PHY_ID_VSC8201,
-       .name           = "Micrel VSC8201",
+static struct phy_driver ks8001_driver = {
+       .phy_id         = PHY_ID_KS8001,
+       .name           = "Micrel KS8001 or KS8721",
        .phy_id_mask    = 0x00fffff0,
-       .features       = PHY_BASIC_FEATURES,
-       .flags          = PHY_POLL,
+       .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+       .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
        .config_init    = kszphy_config_init,
        .config_aneg    = genphy_config_aneg,
        .read_status    = genphy_read_status,
+       .ack_interrupt  = kszphy_ack_interrupt,
+       .config_intr    = kszphy_config_intr,
        .driver         = { .owner = THIS_MODULE,},
 };
 
@@ -58,11 +168,14 @@ static struct phy_driver ksz9021_driver = {
        .phy_id         = PHY_ID_KSZ9021,
        .phy_id_mask    = 0x000fff10,
        .name           = "Micrel KSZ9021 Gigabit PHY",
-       .features       = PHY_GBIT_FEATURES | SUPPORTED_Pause,
-       .flags          = PHY_POLL,
+       .features       = (PHY_GBIT_FEATURES | SUPPORTED_Pause
+                               | SUPPORTED_Asym_Pause),
+       .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
        .config_init    = kszphy_config_init,
        .config_aneg    = genphy_config_aneg,
        .read_status    = genphy_read_status,
+       .ack_interrupt  = kszphy_ack_interrupt,
+       .config_intr    = ksz9021_config_intr,
        .driver         = { .owner = THIS_MODULE, },
 };
 
@@ -73,17 +186,29 @@ static int __init ksphy_init(void)
        ret = phy_driver_register(&ks8001_driver);
        if (ret)
                goto err1;
-       ret = phy_driver_register(&vsc8201_driver);
+
+       ret = phy_driver_register(&ksz9021_driver);
        if (ret)
                goto err2;
 
-       ret = phy_driver_register(&ksz9021_driver);
+       ret = phy_driver_register(&ks8737_driver);
        if (ret)
                goto err3;
+       ret = phy_driver_register(&ks8041_driver);
+       if (ret)
+               goto err4;
+       ret = phy_driver_register(&ks8051_driver);
+       if (ret)
+               goto err5;
+
        return 0;
 
+err5:
+       phy_driver_unregister(&ks8041_driver);
+err4:
+       phy_driver_unregister(&ks8737_driver);
 err3:
-       phy_driver_unregister(&vsc8201_driver);
+       phy_driver_unregister(&ksz9021_driver);
 err2:
        phy_driver_unregister(&ks8001_driver);
 err1:
@@ -93,8 +218,10 @@ err1:
 static void __exit ksphy_exit(void)
 {
        phy_driver_unregister(&ks8001_driver);
-       phy_driver_unregister(&vsc8201_driver);
+       phy_driver_unregister(&ks8737_driver);
        phy_driver_unregister(&ksz9021_driver);
+       phy_driver_unregister(&ks8041_driver);
+       phy_driver_unregister(&ks8051_driver);
 }
 
 module_init(ksphy_init);
@@ -106,8 +233,10 @@ MODULE_LICENSE("GPL");
 
 static struct mdio_device_id micrel_tbl[] = {
        { PHY_ID_KSZ9021, 0x000fff10 },
-       { PHY_ID_VSC8201, 0x00fffff0 },
        { PHY_ID_KS8001, 0x00fffff0 },
+       { PHY_ID_KS8737, 0x00fffff0 },
+       { PHY_ID_KS8041, 0x00fffff0 },
+       { PHY_ID_KS8051, 0x00fffff0 },
        { }
 };