usb: dwc3: add basic PHY support

this will let us control PHYs on platforms which
need them.

Signed-off-by: Felipe Balbi <balbi@ti.com>

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index c34452a7304f9dec269ba64706ab999559e67eff..79a24fab13d142fd7da020c2ba794f33b82263a4 100644 (file)
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -50,6 +50,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
 
+#include <linux/usb/otg.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
@@ -136,6 +137,8 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
        reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
        dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
 
+       usb_phy_init(dwc->usb2_phy);
+       usb_phy_init(dwc->usb3_phy);
        mdelay(100);
 
        /* Clear USB3 PHY reset */
@@ -465,6 +468,18 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
                return -ENOMEM;
        }
 
+       dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+       if (IS_ERR_OR_NULL(dwc->usb2_phy)) {
+               dev_err(dev, "no usb2 phy configured\n");
+               return -EPROBE_DEFER;
+       }
+
+       dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
+       if (IS_ERR_OR_NULL(dwc->usb3_phy)) {
+               dev_err(dev, "no usb3 phy configured\n");
+               return -EPROBE_DEFER;
+       }
+
        spin_lock_init(&dwc->lock);
        platform_set_drvdata(pdev, dwc);
 

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 151eca876dfd17845b071a7f1528105250d47aaa..dbc5713d84fbdfbdb398a2d164bd08f01c96f028 100644 (file)
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -624,6 +624,8 @@ struct dwc3_scratchpad_array {
  * @maximum_speed: maximum speed requested (mainly for testing purposes)
  * @revision: revision register contents
  * @mode: mode of operation
+ * @usb2_phy: pointer to USB2 PHY
+ * @usb3_phy: pointer to USB3 PHY
  * @is_selfpowered: true when we are selfpowered
  * @three_stage_setup: set if we perform a three phase setup
  * @ep0_bounced: true when we used bounce buffer
@@ -667,6 +669,9 @@ struct dwc3 {
        struct usb_gadget       gadget;
        struct usb_gadget_driver *gadget_driver;
 
+       struct usb_phy          *usb2_phy;
+       struct usb_phy          *usb3_phy;
+
        void __iomem            *regs;
        size_t                  regs_size;