mtd: nand: omap: Update DT binding documentation

Add compatible id and interrupts. The NAND interrupts are
provided by the GPMC controller node.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>

diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index fb733c4e1c116e76bea05e690bbd968fd66c8395..ff3215d203431299fe279c96434d27acb0e19f96 100644 (file)
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -13,7 +13,11 @@ Documentation/devicetree/bindings/mtd/nand.txt
 
 Required properties:
 
- - reg:                The CS line the peripheral is connected to
+ - compatible: "ti,omap2-nand"
+ - reg:                range id (CS number), base offset and length of the
+               NAND I/O space
+ - interrupt-parent: must point to gpmc node
+ - interrupts: Two interrupt specifiers, one for fifoevent, one for termcount.
 
 Optional properties:
 
@@ -55,17 +59,22 @@ Example for an AM33xx board:
        gpmc: gpmc@50000000 {
                compatible = "ti,am3352-gpmc";
                ti,hwmods = "gpmc";
-               reg = <0x50000000 0x1000000>;
+               reg = <0x50000000 0x36c>;
                interrupts = <100>;
                gpmc,num-cs = <8>;
                gpmc,num-waitpins = <2>;
                #address-cells = <2>;
                #size-cells = <1>;
-               ranges = <0 0 0x08000000 0x2000>;       /* CS0: NAND */
+               ranges = <0 0 0x08000000 0x1000000>;    /* CS0 space, 16MB */
                elm_id = <&elm>;
+               interrupt-controller;
+               #interrupt-cells = <2>;
 
                nand@0,0 {
-                       reg = <0 0 0>; /* CS0, offset 0 */
+                       compatible = "ti,omap2-nand";
+                       reg = <0 0 4>;          /* CS0, offset 0, NAND I/O window 4 */
+                       interrupt-parent = <&gpmc>;
+                       interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE NONE>;
                        nand-bus-width = <16>;
                        ti,nand-ecc-opt = "bch8";
                        ti,nand-xfer-type = "polled";