Use a more current logging style.
Make sure all output is prefixed appropriately.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "ath5k.h"
#include "reg.h"
#include "debug.h"
ath5k_ani_print_counters(struct ath5k_hw *ah)
{
/* clears too */
- printk(KERN_NOTICE "ACK fail\t%d\n",
- ath5k_hw_reg_read(ah, AR5K_ACK_FAIL));
- printk(KERN_NOTICE "RTS fail\t%d\n",
- ath5k_hw_reg_read(ah, AR5K_RTS_FAIL));
- printk(KERN_NOTICE "RTS success\t%d\n",
- ath5k_hw_reg_read(ah, AR5K_RTS_OK));
- printk(KERN_NOTICE "FCS error\t%d\n",
- ath5k_hw_reg_read(ah, AR5K_FCS_FAIL));
+ pr_notice("ACK fail\t%d\n", ath5k_hw_reg_read(ah, AR5K_ACK_FAIL));
+ pr_notice("RTS fail\t%d\n", ath5k_hw_reg_read(ah, AR5K_RTS_FAIL));
+ pr_notice("RTS success\t%d\n", ath5k_hw_reg_read(ah, AR5K_RTS_OK));
+ pr_notice("FCS error\t%d\n", ath5k_hw_reg_read(ah, AR5K_FCS_FAIL));
/* no clear */
- printk(KERN_NOTICE "tx\t%d\n",
- ath5k_hw_reg_read(ah, AR5K_PROFCNT_TX));
- printk(KERN_NOTICE "rx\t%d\n",
- ath5k_hw_reg_read(ah, AR5K_PROFCNT_RX));
- printk(KERN_NOTICE "busy\t%d\n",
- ath5k_hw_reg_read(ah, AR5K_PROFCNT_RXCLR));
- printk(KERN_NOTICE "cycles\t%d\n",
- ath5k_hw_reg_read(ah, AR5K_PROFCNT_CYCLE));
-
- printk(KERN_NOTICE "AR5K_PHYERR_CNT1\t%d\n",
- ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1));
- printk(KERN_NOTICE "AR5K_PHYERR_CNT2\t%d\n",
- ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2));
- printk(KERN_NOTICE "AR5K_OFDM_FIL_CNT\t%d\n",
- ath5k_hw_reg_read(ah, AR5K_OFDM_FIL_CNT));
- printk(KERN_NOTICE "AR5K_CCK_FIL_CNT\t%d\n",
- ath5k_hw_reg_read(ah, AR5K_CCK_FIL_CNT));
+ pr_notice("tx\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_TX));
+ pr_notice("rx\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_RX));
+ pr_notice("busy\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_RXCLR));
+ pr_notice("cycles\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_CYCLE));
+
+ pr_notice("AR5K_PHYERR_CNT1\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1));
+ pr_notice("AR5K_PHYERR_CNT2\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2));
+ pr_notice("AR5K_OFDM_FIL_CNT\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_OFDM_FIL_CNT));
+ pr_notice("AR5K_CCK_FIL_CNT\t%d\n",
+ ath5k_hw_reg_read(ah, AR5K_CCK_FIL_CNT));
}
#endif
GENERIC DRIVER DEFINITIONS
\****************************/
-#define ATH5K_PRINTF(fmt, ...) \
- printk(KERN_WARNING "%s: " fmt, __func__, ##__VA_ARGS__)
-
-#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \
- printk(_level "ath5k %s: " _fmt, \
- ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \
- ##__VA_ARGS__)
-
-#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \
- if (net_ratelimit()) \
- ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \
- } while (0)
+#define ATH5K_PRINTF(fmt, ...) \
+ pr_warn("%s: " fmt, __func__, ##__VA_ARGS__)
+
+#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \
+ printk(_level pr_fmt("%s%s" _fmt), \
+ ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \
+ ((_sc) && (_sc)->hw) ? ": " : "", \
+ ##__VA_ARGS__)
+
+#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) \
+do { \
+ if (net_ratelimit()) \
+ ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \
+} while (0)
-#define ATH5K_INFO(_sc, _fmt, ...) \
+#define ATH5K_INFO(_sc, _fmt, ...) \
ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__)
-#define ATH5K_WARN(_sc, _fmt, ...) \
+#define ATH5K_WARN(_sc, _fmt, ...) \
ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__)
-#define ATH5K_ERR(_sc, _fmt, ...) \
+#define ATH5K_ERR(_sc, _fmt, ...) \
ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
/*
* Attach/Detach Functions and helpers *
\*************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/pci.h>
#include <linux/slab.h>
#include "ath5k.h"
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/export.h>
#include <linux/moduleparam.h>
if (strncmp(buf, "disable", 7) == 0) {
AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE);
- printk(KERN_INFO "debugfs disable beacons\n");
+ pr_info("debugfs disable beacons\n");
} else if (strncmp(buf, "enable", 6) == 0) {
AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE);
- printk(KERN_INFO "debugfs enable beacons\n");
+ pr_info("debugfs enable beacons\n");
}
return count;
}
if (strncmp(buf, "diversity", 9) == 0) {
ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_DEFAULT);
- printk(KERN_INFO "ath5k debug: enable diversity\n");
+ pr_info("debug: enable diversity\n");
} else if (strncmp(buf, "fixed-a", 7) == 0) {
ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_FIXED_A);
- printk(KERN_INFO "ath5k debugfs: fixed antenna A\n");
+ pr_info("debug: fixed antenna A\n");
} else if (strncmp(buf, "fixed-b", 7) == 0) {
ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_FIXED_B);
- printk(KERN_INFO "ath5k debug: fixed antenna B\n");
+ pr_info("debug: fixed antenna B\n");
} else if (strncmp(buf, "clear", 5) == 0) {
for (i = 0; i < ARRAY_SIZE(ah->stats.antenna_rx); i++) {
ah->stats.antenna_rx[i] = 0;
ah->stats.antenna_tx[i] = 0;
}
- printk(KERN_INFO "ath5k debug: cleared antenna stats\n");
+ pr_info("debug: cleared antenna stats\n");
}
return count;
}
st->txerr_fifo = 0;
st->txerr_filt = 0;
st->tx_all_count = 0;
- printk(KERN_INFO "ath5k debug: cleared frameerrors stats\n");
+ pr_info("debug: cleared frameerrors stats\n");
}
return count;
}
Hardware Descriptor Functions
\******************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "ath5k.h"
#include "reg.h"
#include "debug.h"
* status registers (ISR).
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "ath5k.h"
#include "reg.h"
#include "debug.h"
* EEPROM access functions and helpers *
\*************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/slab.h>
#include "ath5k.h"
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "ath5k.h"
#include "reg.h"
#include "debug.h"
/* AR5K_MODE_11B */
if (mode > 2) {
- ATH5K_ERR(ah,
- "unsupported channel mode: %d\n", mode);
+ ATH5K_ERR(ah, "unsupported channel mode: %d\n", mode);
return -EINVAL;
}
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/pci.h>
#include "ath5k.h"
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <net/mac80211.h>
#include <asm/unaligned.h>
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/nl80211.h>
#include <linux/pci.h>
#include <linux/pci-aspm.h>
ret = pci_register_driver(&ath5k_pci_driver);
if (ret) {
- printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
+ pr_err("pci: can't register pci driver\n");
return ret;
}
* PHY related functions *
\***********************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/delay.h>
#include <linux/slab.h>
#include <asm/unaligned.h>
Queue Control Unit, DCF Control Unit Functions
\********************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "ath5k.h"
#include "reg.h"
#include "debug.h"
Reset function and helpers
\****************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <asm/unaligned.h>
#include <linux/pci.h> /* To determine if a card is pci-e */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/device.h>
#include <linux/pci.h>
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/moduleparam.h>
#include <linux/inetdevice.h>
#include <linux/export.h>
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/moduleparam.h>
#include <linux/errno.h>
#include <linux/export.h>
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "core.h"
#include "hif-ops.h"
#include "cfg80211.h"
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "core.h"
#include "debug.h"
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "htc.h"
MODULE_AUTHOR("Atheros Communications");
static int __init ath9k_htc_init(void)
{
if (ath9k_hif_usb_init() < 0) {
- printk(KERN_ERR
- "ath9k_htc: No USB devices found,"
- " driver not installed.\n");
+ pr_err("No USB devices found, driver not installed\n");
return -ENODEV;
}
static void __exit ath9k_htc_exit(void)
{
ath9k_hif_usb_exit();
- printk(KERN_INFO "ath9k_htc: Driver unloaded\n");
+ pr_info("Driver unloaded\n");
}
module_exit(ath9k_htc_exit);
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "htc.h"
static int htc_issue_send(struct htc_target *target, struct sk_buff* skb,
char *product, u32 drv_info)
{
if (ath9k_htc_probe_device(target, dev, devid, product, drv_info)) {
- printk(KERN_ERR "Failed to initialize the device\n");
+ pr_err("Failed to initialize the device\n");
return -ENODEV;
}
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/ath9k_platform.h>
/* Register rate control algorithm */
error = ath_rate_control_register();
if (error != 0) {
- printk(KERN_ERR
- "ath9k: Unable to register rate control "
- "algorithm: %d\n",
- error);
+ pr_err("Unable to register rate control algorithm: %d\n",
+ error);
goto err_out;
}
error = ath_pci_init();
if (error < 0) {
- printk(KERN_ERR
- "ath9k: No PCI devices found, driver not installed.\n");
+ pr_err("No PCI devices found, driver not installed\n");
error = -ENODEV;
goto err_rate_unregister;
}
ath_ahb_exit();
ath_pci_exit();
ath_rate_control_unregister();
- printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
+ pr_info("%s: Driver unloaded\n", dev_info);
}
module_exit(ath9k_exit);
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/nl80211.h>
#include <linux/pci.h>
#include <linux/pci-aspm.h>
ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (ret) {
- printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
+ pr_err("32-bit DMA not available\n");
goto err_dma;
}
ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (ret) {
- printk(KERN_ERR "ath9k: 32-bit DMA consistent "
- "DMA enable failed\n");
+ pr_err("32-bit DMA consistent DMA enable failed\n");
goto err_dma;
}
mem = pci_iomap(pdev, 0, 0);
if (!mem) {
- printk(KERN_ERR "PCI memory map error\n") ;
+ pr_err("PCI memory map error\n") ;
ret = -EIO;
goto err_iomap;
}
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
if (off != 0)
skb_reserve(skb, common->cachelsz - off);
} else {
- printk(KERN_ERR "skbuff alloc of size %u failed\n", len);
+ pr_err("skbuff alloc of size %u failed\n", len);
return NULL;
}
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/export.h>
#include <net/cfg80211.h>
printk(KERN_DEBUG "ath: EEPROM regdomain: 0x%0x\n", reg->current_rd);
if (!ath_regd_is_eeprom_valid(reg)) {
- printk(KERN_ERR "ath: Invalid EEPROM contents\n");
+ pr_err("Invalid EEPROM contents\n");
return -EINVAL;
}
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff