}
}
+/**
+ * i40e_config_bridge_mode - Configure the HW bridge mode
+ * @veb: pointer to the bridge instance
+ *
+ * Configure the loop back mode for the LAN VSI that is downlink to the
+ * specified HW bridge instance. It is expected this function is called
+ * when a new HW bridge is instantiated.
+ **/
+static void i40e_config_bridge_mode(struct i40e_veb *veb)
+{
+ struct i40e_pf *pf = veb->pf;
+
+ dev_info(&pf->pdev->dev, "enabling bridge mode: %s\n",
+ veb->bridge_mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB");
+ if (veb->bridge_mode & BRIDGE_MODE_VEPA)
+ i40e_disable_pf_switch_lb(pf);
+ else
+ i40e_enable_pf_switch_lb(pf);
+}
+
/**
* i40e_reconstitute_veb - rebuild the VEB and anything connected to it
* @veb: pointer to the VEB instance
if (ret)
goto end_reconstitute;
- /* Enable LB mode for the main VSI now that it is on a VEB */
- i40e_enable_pf_switch_lb(pf);
+ i40e_config_bridge_mode(veb);
/* create the remaining VSIs attached to this VEB */
for (v = 0; v < pf->num_alloc_vsi; v++) {
return err;
}
+#ifdef HAVE_BRIDGE_ATTRIBS
+/**
+ * i40e_ndo_bridge_setlink - Set the hardware bridge mode
+ * @dev: the netdev being configured
+ * @nlh: RTNL message
+ *
+ * Inserts a new hardware bridge if not already created and
+ * enables the bridging mode requested (VEB or VEPA). If the
+ * hardware bridge has already been inserted and the request
+ * is to change the mode then that requires a PF reset to
+ * allow rebuild of the components with required hardware
+ * bridge mode enabled.
+ **/
+static int i40e_ndo_bridge_setlink(struct net_device *dev,
+ struct nlmsghdr *nlh)
+{
+ struct i40e_netdev_priv *np = netdev_priv(dev);
+ struct i40e_vsi *vsi = np->vsi;
+ struct i40e_pf *pf = vsi->back;
+ struct i40e_veb *veb = NULL;
+ struct nlattr *attr, *br_spec;
+ int i, rem;
+
+ /* Only for PF VSI for now */
+ if (vsi->seid != pf->vsi[pf->lan_vsi]->seid)
+ return -EOPNOTSUPP;
+
+ /* Find the HW bridge for PF VSI */
+ for (i = 0; i < I40E_MAX_VEB && !veb; i++) {
+ if (pf->veb[i] && pf->veb[i]->seid == vsi->uplink_seid)
+ veb = pf->veb[i];
+ }
+
+ br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC);
+
+ nla_for_each_nested(attr, br_spec, rem) {
+ __u16 mode;
+
+ if (nla_type(attr) != IFLA_BRIDGE_MODE)
+ continue;
+
+ mode = nla_get_u16(attr);
+ if ((mode != BRIDGE_MODE_VEPA) &&
+ (mode != BRIDGE_MODE_VEB))
+ return -EINVAL;
+
+ /* Insert a new HW bridge */
+ if (!veb) {
+ veb = i40e_veb_setup(pf, 0, vsi->uplink_seid, vsi->seid,
+ vsi->tc_config.enabled_tc);
+ if (veb) {
+ veb->bridge_mode = mode;
+ i40e_config_bridge_mode(veb);
+ } else {
+ /* No Bridge HW offload available */
+ return -ENOENT;
+ }
+ break;
+ } else if (mode != veb->bridge_mode) {
+ /* Existing HW bridge but different mode needs reset */
+ veb->bridge_mode = mode;
+ i40e_do_reset(pf, (1 << __I40E_PF_RESET_REQUESTED));
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * i40e_ndo_bridge_getlink - Get the hardware bridge mode
+ * @skb: skb buff
+ * @pid: process id
+ * @seq: RTNL message seq #
+ * @dev: the netdev being configured
+ * @filter_mask: unused
+ *
+ * Return the mode in which the hardware bridge is operating in
+ * i.e VEB or VEPA.
+ **/
+#ifdef HAVE_BRIDGE_FILTER
+static int i40e_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
+ struct net_device *dev,
+ u32 __always_unused filter_mask)
+#else
+static int i40e_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
+ struct net_device *dev)
+#endif /* HAVE_BRIDGE_FILTER */
+{
+ struct i40e_netdev_priv *np = netdev_priv(dev);
+ struct i40e_vsi *vsi = np->vsi;
+ struct i40e_pf *pf = vsi->back;
+ struct i40e_veb *veb = NULL;
+ int i;
+
+ /* Only for PF VSI for now */
+ if (vsi->seid != pf->vsi[pf->lan_vsi]->seid)
+ return -EOPNOTSUPP;
+
+ /* Find the HW bridge for the PF VSI */
+ for (i = 0; i < I40E_MAX_VEB && !veb; i++) {
+ if (pf->veb[i] && pf->veb[i]->seid == vsi->uplink_seid)
+ veb = pf->veb[i];
+ }
+
+ if (!veb)
+ return 0;
+
+ return ndo_dflt_bridge_getlink(skb, pid, seq, dev, veb->bridge_mode);
+}
+#endif /* HAVE_BRIDGE_ATTRIBS */
+
const struct net_device_ops i40e_netdev_ops = {
.ndo_open = i40e_open,
.ndo_stop = i40e_close,
#endif
.ndo_get_phys_port_id = i40e_get_phys_port_id,
.ndo_fdb_add = i40e_ndo_fdb_add,
+#ifdef HAVE_BRIDGE_ATTRIBS
+ .ndo_bridge_getlink = i40e_ndo_bridge_getlink,
+ .ndo_bridge_setlink = i40e_ndo_bridge_setlink,
+#endif /* HAVE_BRIDGE_ATTRIBS */
};
/**
i40e_aq_delete_element(&vsi->back->hw, vsi->seid, NULL);
}
+/**
+ * i40e_is_vsi_uplink_mode_veb - Check if the VSI's uplink bridge mode is VEB
+ * @vsi: the VSI being queried
+ *
+ * Returns 1 if HW bridge mode is VEB and return 0 in case of VEPA mode
+ **/
+int i40e_is_vsi_uplink_mode_veb(struct i40e_vsi *vsi)
+{
+ struct i40e_veb *veb;
+ struct i40e_pf *pf = vsi->back;
+
+ /* Uplink is not a bridge so default to VEB */
+ if (vsi->veb_idx == I40E_NO_VEB)
+ return 1;
+
+ veb = pf->veb[vsi->veb_idx];
+ /* Uplink is a bridge in VEPA mode */
+ if (veb && (veb->bridge_mode & BRIDGE_MODE_VEPA))
+ return 0;
+
+ /* Uplink is a bridge in VEB mode */
+ return 1;
+}
+
/**
* i40e_add_vsi - Add a VSI to the switch
* @vsi: the VSI being configured
ctxt.uplink_seid = vsi->uplink_seid;
ctxt.connection_type = I40E_AQ_VSI_CONN_TYPE_NORMAL;
ctxt.flags = I40E_AQ_VSI_TYPE_PF;
- ctxt.info.valid_sections |=
+ if (i40e_is_vsi_uplink_mode_veb(vsi)) {
+ ctxt.info.valid_sections |=
cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
- ctxt.info.switch_id =
+ ctxt.info.switch_id =
cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
+ }
i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
break;
ctxt.connection_type = I40E_AQ_VSI_CONN_TYPE_NORMAL;
ctxt.flags = I40E_AQ_VSI_TYPE_VMDQ2;
- ctxt.info.valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
-
/* This VSI is connected to VEB so the switch_id
* should be set to zero by default.
*/
- ctxt.info.switch_id = 0;
- ctxt.info.switch_id |= cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
+ if (i40e_is_vsi_uplink_mode_veb(vsi)) {
+ ctxt.info.valid_sections |=
+ cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
+ ctxt.info.switch_id =
+ cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
+ }
/* Setup the VSI tx/rx queue map for TC0 only for now */
i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
ctxt.connection_type = I40E_AQ_VSI_CONN_TYPE_NORMAL;
ctxt.flags = I40E_AQ_VSI_TYPE_VF;
- ctxt.info.valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
-
/* This VSI is connected to VEB so the switch_id
* should be set to zero by default.
*/
- ctxt.info.switch_id = cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
+ if (i40e_is_vsi_uplink_mode_veb(vsi)) {
+ ctxt.info.valid_sections |=
+ cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
+ ctxt.info.switch_id =
+ cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
+ }
ctxt.info.valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
ctxt.info.port_vlan_flags |= I40E_AQ_VSI_PVLAN_MODE_ALL;
__func__);
return NULL;
}
- i40e_enable_pf_switch_lb(pf);
+ i40e_config_bridge_mode(veb);
}
for (i = 0; i < I40E_MAX_VEB && !veb; i++) {
if (pf->veb[i] && pf->veb[i]->seid == vsi->uplink_seid)
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff