i2c: qup: add ACPI support

Add support to get the device parameters from ACPI. Assume
that the clocks are managed by firmware.

Signed-off-by: Naveen Kaje <nkaje@codeaurora.org>
Signed-off-by: Austin Christ <austinwc@codeaurora.org>
Reviewed-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index a8497cfdae6f40a4de6bd4c57cac4d8f3789967f..cef553fe270bd31f351fe3c4377084a962fc5537 100644 (file)
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -14,6 +14,7 @@
  *
  */
 
+#include <linux/acpi.h>
 #include <linux/atomic.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
@@ -132,6 +133,10 @@
 /* Max timeout in ms for 32k bytes */
 #define TOUT_MAX                       300
 
+/* Default values. Use these if FW query fails */
+#define DEFAULT_CLK_FREQ 100000
+#define DEFAULT_SRC_CLK 20000000
+
 struct qup_i2c_block {
        int     count;
        int     pos;
@@ -1358,14 +1363,13 @@ static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup)
 static int qup_i2c_probe(struct platform_device *pdev)
 {
        static const int blk_sizes[] = {4, 16, 32};
-       struct device_node *node = pdev->dev.of_node;
        struct qup_i2c_dev *qup;
        unsigned long one_bit_t;
        struct resource *res;
        u32 io_mode, hw_ver, size;
        int ret, fs_div, hs_div;
-       int src_clk_freq;
-       u32 clk_freq = 100000;
+       u32 src_clk_freq = DEFAULT_SRC_CLK;
+       u32 clk_freq = DEFAULT_CLK_FREQ;
        int blocks;
 
        qup = devm_kzalloc(&pdev->dev, sizeof(*qup), GFP_KERNEL);
@@ -1376,7 +1380,11 @@ static int qup_i2c_probe(struct platform_device *pdev)
        init_completion(&qup->xfer);
        platform_set_drvdata(pdev, qup);
 
-       of_property_read_u32(node, "clock-frequency", &clk_freq);
+       ret = device_property_read_u32(qup->dev, "clock-frequency", &clk_freq);
+       if (ret) {
+               dev_notice(qup->dev, "using default clock-frequency %d",
+                       DEFAULT_CLK_FREQ);
+       }
 
        if (of_device_is_compatible(pdev->dev.of_node, "qcom,i2c-qup-v1.1.1")) {
                qup->adap.algo = &qup_i2c_algo;
@@ -1452,20 +1460,30 @@ nodma:
                return qup->irq;
        }
 
-       qup->clk = devm_clk_get(qup->dev, "core");
-       if (IS_ERR(qup->clk)) {
-               dev_err(qup->dev, "Could not get core clock\n");
-               return PTR_ERR(qup->clk);
-       }
+       if (has_acpi_companion(qup->dev)) {
+               ret = device_property_read_u32(qup->dev,
+                               "src-clock-hz", &src_clk_freq);
+               if (ret) {
+                       dev_notice(qup->dev, "using default src-clock-hz %d",
+                               DEFAULT_SRC_CLK);
+               }
+               ACPI_COMPANION_SET(&qup->adap.dev, ACPI_COMPANION(qup->dev));
+       } else {
+               qup->clk = devm_clk_get(qup->dev, "core");
+               if (IS_ERR(qup->clk)) {
+                       dev_err(qup->dev, "Could not get core clock\n");
+                       return PTR_ERR(qup->clk);
+               }
 
-       qup->pclk = devm_clk_get(qup->dev, "iface");
-       if (IS_ERR(qup->pclk)) {
-               dev_err(qup->dev, "Could not get iface clock\n");
-               return PTR_ERR(qup->pclk);
+               qup->pclk = devm_clk_get(qup->dev, "iface");
+               if (IS_ERR(qup->pclk)) {
+                       dev_err(qup->dev, "Could not get iface clock\n");
+                       return PTR_ERR(qup->pclk);
+               }
+               qup_i2c_enable_clocks(qup);
+               src_clk_freq = clk_get_rate(qup->clk);
        }
 
-       qup_i2c_enable_clocks(qup);
-
        /*
         * Bootloaders might leave a pending interrupt on certain QUP's,
         * so we reset the core before registering for interrupts.
@@ -1512,7 +1530,6 @@ nodma:
        size = QUP_INPUT_FIFO_SIZE(io_mode);
        qup->in_fifo_sz = qup->in_blk_sz * (2 << size);
 
-       src_clk_freq = clk_get_rate(qup->clk);
        fs_div = ((src_clk_freq / clk_freq) / 2) - 3;
        hs_div = 3;
        qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff);
@@ -1631,6 +1648,14 @@ static const struct of_device_id qup_i2c_dt_match[] = {
 };
 MODULE_DEVICE_TABLE(of, qup_i2c_dt_match);
 
+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id qup_i2c_acpi_match[] = {
+       { "QCOM8010"},
+       { },
+};
+MODULE_DEVICE_TABLE(acpi, qup_i2c_acpi_match);
+#endif
+
 static struct platform_driver qup_i2c_driver = {
        .probe  = qup_i2c_probe,
        .remove = qup_i2c_remove,
@@ -1638,6 +1663,7 @@ static struct platform_driver qup_i2c_driver = {
                .name = "i2c_qup",
                .pm = &qup_i2c_qup_pm_ops,
                .of_match_table = qup_i2c_dt_match,
+               .acpi_match_table = ACPI_PTR(qup_i2c_acpi_match),
        },
 };