* RNDIS is NDIS remoted over USB. It's a MSFT variant of CDC ACM ... of
* course ACM was intended for modems, not Ethernet links! USB's standard
* for Ethernet links is "CDC Ethernet", which is significantly simpler.
+ *
+ * NOTE that Microsoft's "RNDIS 1.0" specification is incomplete. Issues
+ * include:
+ * - Power management in particular relies on information that's scattered
+ * through other documentation, and which is incomplete or incorrect even
+ * there.
+ * - There are various undocumented protocol requirements, such as the
+ * need to send unused garbage in control-OUT messages.
+ * - In some cases, MS-Windows will emit undocumented requests; this
+ * matters more to peripheral implementations than host ones.
+ *
+ * For these reasons and others, ** USE OF RNDIS IS STRONGLY DISCOURAGED ** in
+ * favor of such non-proprietary alternatives as CDC Ethernet or the newer (and
+ * currently rare) "Ethernet Emulation Model" (EEM).
*/
/*
*/
#define RNDIS_MSG_PACKET ccpu2(0x00000001) /* 1-N packets */
#define RNDIS_MSG_INIT ccpu2(0x00000002)
-#define RNDIS_MSG_INIT_C (RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_INIT_C (RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION)
#define RNDIS_MSG_HALT ccpu2(0x00000003)
#define RNDIS_MSG_QUERY ccpu2(0x00000004)
-#define RNDIS_MSG_QUERY_C (RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_QUERY_C (RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION)
#define RNDIS_MSG_SET ccpu2(0x00000005)
-#define RNDIS_MSG_SET_C (RNDIS_MSG_SET|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_SET_C (RNDIS_MSG_SET|RNDIS_MSG_COMPLETION)
#define RNDIS_MSG_RESET ccpu2(0x00000006)
-#define RNDIS_MSG_RESET_C (RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_RESET_C (RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION)
#define RNDIS_MSG_INDICATE ccpu2(0x00000007)
#define RNDIS_MSG_KEEPALIVE ccpu2(0x00000008)
-#define RNDIS_MSG_KEEPALIVE_C (RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_KEEPALIVE_C (RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)
/* codes for "status" field of completion messages */
#define RNDIS_STATUS_SUCCESS ccpu2(0x00000000)
static int __init rndis_init(void)
{
- return usb_register(&rndis_driver);
+ return usb_register(&rndis_driver);
}
module_init(rndis_init);
static void __exit rndis_exit(void)
{
- usb_deregister(&rndis_driver);
+ usb_deregister(&rndis_driver);
}
module_exit(rndis_exit);