net: phy: bcm7xxx: Fix shadow mode 2 disabling

The clear and set masks in the call to phy_set_clr_bits() called from
bcm7xxx_config_init() are inverted. We need to fix this by swapping the two
arguments, that is, set 0 bits, but clear the shade mode 2 enable bit.

Fixes: b560a58c45c66 ("net: phy: add Broadcom BCM7xxx internal PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index bf241a3ec5e56ceb9d9f85aed73bab90f1559781..234a28502793ceabc0dc80a90be9219c8283bc39 100644 (file)
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -270,7 +270,7 @@ static int bcm7xxx_config_init(struct phy_device *phydev)
        phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555);
 
        /* reset shadow mode 2 */
-       ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0);
+       ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, MII_BCM7XXX_SHD_MODE_2);
        if (ret < 0)
                return ret;