hwmon: (sht3x) add humidity heater element control

The enables control of the SHT31 sensors heating element that can turned
on to remove excess humidity.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: David Frey <david.frey@sensirion.com>
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/Documentation/hwmon/sht3x b/Documentation/hwmon/sht3x
index f5aa633ed3839b92d7a7f289f347b1ce99f64bf2..b0d88184f48ee16905b910dc4c3ee2f9086c3423 100644 (file)
--- a/Documentation/hwmon/sht3x
+++ b/Documentation/hwmon/sht3x
@@ -67,6 +67,10 @@ temp1_alarm:        alarm flag is set to 1 if the temperature is outside the
                     configured limits. Alarm only works in periodic measure mode
 humidity1_alarm:    alarm flag is set to 1 if the humidity is outside the
                     configured limits. Alarm only works in periodic measure mode
+heater_enable:      heater enable, heating element removes excess humidity from
+                    sensor
+                        0: turned off
+                        1: turned on
 update_interval:    update interval, 0 for single shot, interval in msec
                     for periodic measurement. If the interval is not supported
                     by the sensor, the next faster interval is chosen

diff --git a/drivers/hwmon/sht3x.c b/drivers/hwmon/sht3x.c
index 707a3f85385baf092d9f6c3c4d4b5b13dae8fc5a..b73a4883273230f770206d0b4458f3e0f41dc7f7 100644 (file)
--- a/drivers/hwmon/sht3x.c
+++ b/drivers/hwmon/sht3x.c
@@ -44,6 +44,10 @@ static const unsigned char sht3x_cmd_measure_nonblocking_lpm[] = { 0x24, 0x16 };
 static const unsigned char sht3x_cmd_measure_periodic_mode[]   = { 0xe0, 0x00 };
 static const unsigned char sht3x_cmd_break[]                   = { 0x30, 0x93 };
 
+/* commands for heater control */
+static const unsigned char sht3x_cmd_heater_on[]               = { 0x30, 0x6d };
+static const unsigned char sht3x_cmd_heater_off[]              = { 0x30, 0x66 };
+
 /* other commands */
 static const unsigned char sht3x_cmd_read_status_reg[]         = { 0xf3, 0x2d };
 static const unsigned char sht3x_cmd_clear_status_reg[]        = { 0x30, 0x41 };
@@ -507,6 +511,49 @@ static ssize_t humidity1_alarm_show(struct device *dev,
        return scnprintf(buf, PAGE_SIZE, "%d\n", !!(buffer[0] & 0x08));
 }
 
+static ssize_t heater_enable_show(struct device *dev,
+                                 struct device_attribute *attr,
+                                 char *buf)
+{
+       char buffer[SHT3X_WORD_LEN + SHT3X_CRC8_LEN];
+       int ret;
+
+       ret = status_register_read(dev, attr, buffer,
+                                  SHT3X_WORD_LEN + SHT3X_CRC8_LEN);
+       if (ret)
+               return ret;
+
+       return scnprintf(buf, PAGE_SIZE, "%d\n", !!(buffer[0] & 0x20));
+}
+
+static ssize_t heater_enable_store(struct device *dev,
+                                  struct device_attribute *attr,
+                                  const char *buf,
+                                  size_t count)
+{
+       struct sht3x_data *data = dev_get_drvdata(dev);
+       struct i2c_client *client = data->client;
+       int ret;
+       bool status;
+
+       ret = kstrtobool(buf, &status);
+       if (ret)
+               return ret;
+
+       mutex_lock(&data->i2c_lock);
+
+       if (status)
+               ret = i2c_master_send(client, (char *)&sht3x_cmd_heater_on,
+                                     SHT3X_CMD_LENGTH);
+       else
+               ret = i2c_master_send(client, (char *)&sht3x_cmd_heater_off,
+                                     SHT3X_CMD_LENGTH);
+
+       mutex_unlock(&data->i2c_lock);
+
+       return ret;
+}
+
 static ssize_t update_interval_show(struct device *dev,
                                    struct device_attribute *attr,
                                    char *buf)
@@ -612,6 +659,8 @@ static SENSOR_DEVICE_ATTR(humidity1_min_hyst, S_IRUGO | S_IWUSR,
 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, temp1_alarm_show, NULL, 0);
 static SENSOR_DEVICE_ATTR(humidity1_alarm, S_IRUGO, humidity1_alarm_show,
                          NULL, 0);
+static SENSOR_DEVICE_ATTR(heater_enable, S_IRUGO | S_IWUSR,
+                         heater_enable_show, heater_enable_store, 0);
 static SENSOR_DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR,
                          update_interval_show, update_interval_store, 0);
 
@@ -628,6 +677,7 @@ static struct attribute *sht3x_attrs[] = {
        &sensor_dev_attr_humidity1_min_hyst.dev_attr.attr,
        &sensor_dev_attr_temp1_alarm.dev_attr.attr,
        &sensor_dev_attr_humidity1_alarm.dev_attr.attr,
+       &sensor_dev_attr_heater_enable.dev_attr.attr,
        &sensor_dev_attr_update_interval.dev_attr.attr,
        NULL
 };