firmware: qcom: scm: Add function stubs for ARM64

This patch adds stubs for the SCM functions exposed in the QCOM SCM API.

Signed-off-by: Andy Gross <agross@codeaurora.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index d8de6a8dd4de156e395cd36e6f25690bb347b613..665efca59487a3eb4d341570002794e09f7bd11a 100644 (file)
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -139,6 +139,14 @@ config QCOM_SCM
        bool
        depends on ARM || ARM64
 
+config QCOM_SCM_32
+       def_bool y
+       depends on QCOM_SCM && ARM
+
+config QCOM_SCM_64
+       def_bool y
+       depends on QCOM_SCM && ARM64
+
 source "drivers/firmware/broadcom/Kconfig"
 source "drivers/firmware/google/Kconfig"
 source "drivers/firmware/efi/Kconfig"

diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 000830fc6707e88c8ae59961616e4e84468f1fb3..2ee83474a3c1fec73d8e587465c9b5fb71b333b3 100644 (file)
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -13,7 +13,8 @@ obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_ibft_find.o
 obj-$(CONFIG_ISCSI_IBFT)       += iscsi_ibft.o
 obj-$(CONFIG_FIRMWARE_MEMMAP)  += memmap.o
 obj-$(CONFIG_QCOM_SCM)         += qcom_scm.o
-obj-$(CONFIG_QCOM_SCM)         += qcom_scm-32.o
+obj-$(CONFIG_QCOM_SCM_64)      += qcom_scm-64.o
+obj-$(CONFIG_QCOM_SCM_32)      += qcom_scm-32.o
 CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
 
 obj-y                          += broadcom/

diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
new file mode 100644 (file)
index 0000000..bb6555f
--- /dev/null
+++ b/drivers/firmware/qcom_scm-64.c
@@ -0,0 +1,63 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/qcom_scm.h>
+
+/**
+ * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
+ *
+ * Set the cold boot address of the cpus. Any cpu outside the supported
+ * range would be removed from the cpu present mask.
+ */
+int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
+{
+       return -ENOTSUPP;
+}
+
+/**
+ * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
+ *
+ * Set the Linux entry point for the SCM to transfer control to when coming
+ * out of a power down. CPU power down may be executed on cpuidle or hotplug.
+ */
+int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
+{
+       return -ENOTSUPP;
+}
+
+/**
+ * qcom_scm_cpu_power_down() - Power down the cpu
+ * @flags - Flags to flush cache
+ *
+ * This is an end point to power down cpu. If there was a pending interrupt,
+ * the control would return from this function, otherwise, the cpu jumps to the
+ * warm boot entry point set for this cpu upon reset.
+ */
+void __qcom_scm_cpu_power_down(u32 flags)
+{
+}
+
+int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id)
+{
+       return -ENOTSUPP;
+}
+
+int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+{
+       return -ENOTSUPP;
+}