--- /dev/null
+Pinctrl-based I2C Bus DeMux
+
+This binding describes an I2C bus demultiplexer that uses pin multiplexing to
+route the I2C signals, and represents the pin multiplexing configuration using
+the pinctrl device tree bindings. This may be used to select one I2C IP core at
+runtime which may have a better feature set for a given task than another I2C
+IP core on the SoC. The most simple example is to fall back to GPIO bitbanging
+if your current runtime configuration hits an errata of the internal IP core.
+
+ +-------------------------------+
+ | SoC |
+ | | +-----+ +-----+
+ | +------------+ | | dev | | dev |
+ | |I2C IP Core1|--\ | +-----+ +-----+
+ | +------------+ \-------+ | | |
+ | |Pinctrl|--|------+--------+
+ | +------------+ +-------+ |
+ | |I2C IP Core2|--/ |
+ | +------------+ |
+ | |
+ +-------------------------------+
+
+Required properties:
+- compatible: "i2c-demux-pinctrl"
+- i2c-parent: List of phandles of I2C masters available for selection. The first
+ one will be used as default.
+- i2c-bus-name: The name of this bus. Also needed as pinctrl-name for the I2C
+ parents.
+
+Furthermore, I2C mux properties and child nodes. See mux.txt in this directory.
+
+Example:
+
+Here is a snipplet for a bus to be demuxed. It contains various i2c clients for
+HDMI, so the bus is named "i2c-hdmi":
+
+ i2chdmi: i2c@8 {
+
+ compatible = "i2c-demux-pinctrl";
+ i2c-parent = <&gpioi2c>, <&iic2>, <&i2c2>;
+ i2c-bus-name = "i2c-hdmi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ak4643: sound-codec@12 {
+ compatible = "asahi-kasei,ak4643";
+
+ #sound-dai-cells = <0>;
+ reg = <0x12>;
+ };
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin1>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin1ep0>;
+ };
+ };
+ };
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+ };
+
+And for clarification, here are the snipplets for the i2c-parents:
+
+ gpioi2c: i2c@9 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "i2c-gpio";
+ status = "disabled";
+ gpios = <&gpio5 6 GPIO_ACTIVE_HIGH /* sda */
+ &gpio5 5 GPIO_ACTIVE_HIGH /* scl */
+ >;
+ i2c-gpio,delay-us = <5>;
+ };
+
+...
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "i2c-hdmi";
+
+ clock-frequency = <100000>;
+};
+
+...
+
+&iic2 {
+ pinctrl-0 = <&iic2_pins>;
+ pinctrl-names = "i2c-hdmi";
+
+ clock-frequency = <100000>;
+};
+
+Please note:
+
+- pinctrl properties for the parent I2C controllers need a pinctrl state
+ with the same name as i2c-bus-name, not "default"!
+
+- the i2c masters must have their status "disabled". This driver will
+ enable them at runtime when needed.
--- /dev/null
+/*
+ * Pinctrl based I2C DeMultiplexer
+ *
+ * Copyright (C) 2015-16 by Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ * Copyright (C) 2015-16 by Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ *
+ * See the bindings doc for DTS setup and the sysfs doc for usage information.
+ * (look for filenames containing 'i2c-demux-pinctrl' in Documentation/)
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+struct i2c_demux_pinctrl_chan {
+ struct device_node *parent_np;
+ struct i2c_adapter *parent_adap;
+ struct of_changeset chgset;
+};
+
+struct i2c_demux_pinctrl_priv {
+ int cur_chan;
+ int num_chan;
+ struct device *dev;
+ const char *bus_name;
+ struct i2c_adapter cur_adap;
+ struct i2c_algorithm algo;
+ struct i2c_demux_pinctrl_chan chan[];
+};
+
+static struct property status_okay = { .name = "status", .length = 3, .value = "ok" };
+
+static int i2c_demux_master_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+ struct i2c_demux_pinctrl_priv *priv = adap->algo_data;
+ struct i2c_adapter *parent = priv->chan[priv->cur_chan].parent_adap;
+
+ return __i2c_transfer(parent, msgs, num);
+}
+
+static u32 i2c_demux_functionality(struct i2c_adapter *adap)
+{
+ struct i2c_demux_pinctrl_priv *priv = adap->algo_data;
+ struct i2c_adapter *parent = priv->chan[priv->cur_chan].parent_adap;
+
+ return parent->algo->functionality(parent);
+}
+
+static int i2c_demux_activate_master(struct i2c_demux_pinctrl_priv *priv, u32 new_chan)
+{
+ struct i2c_adapter *adap;
+ struct pinctrl *p;
+ int ret;
+
+ ret = of_changeset_apply(&priv->chan[new_chan].chgset);
+ if (ret)
+ goto err;
+
+ adap = of_find_i2c_adapter_by_node(priv->chan[new_chan].parent_np);
+ if (!adap) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ p = devm_pinctrl_get_select(adap->dev.parent, priv->bus_name);
+ if (IS_ERR(p)) {
+ ret = PTR_ERR(p);
+ goto err_with_put;
+ }
+
+ priv->chan[new_chan].parent_adap = adap;
+ priv->cur_chan = new_chan;
+
+ /* Now fill out current adapter structure. cur_chan must be up to date */
+ priv->algo.master_xfer = i2c_demux_master_xfer;
+ priv->algo.functionality = i2c_demux_functionality;
+
+ snprintf(priv->cur_adap.name, sizeof(priv->cur_adap.name),
+ "i2c-demux (master i2c-%d)", i2c_adapter_id(adap));
+ priv->cur_adap.owner = THIS_MODULE;
+ priv->cur_adap.algo = &priv->algo;
+ priv->cur_adap.algo_data = priv;
+ priv->cur_adap.dev.parent = priv->dev;
+ priv->cur_adap.class = adap->class;
+ priv->cur_adap.retries = adap->retries;
+ priv->cur_adap.timeout = adap->timeout;
+ priv->cur_adap.quirks = adap->quirks;
+ priv->cur_adap.dev.of_node = priv->dev->of_node;
+ ret = i2c_add_adapter(&priv->cur_adap);
+ if (ret < 0)
+ goto err_with_put;
+
+ return 0;
+
+ err_with_put:
+ i2c_put_adapter(adap);
+ err:
+ dev_err(priv->dev, "failed to setup demux-adapter %d (%d)\n", new_chan, ret);
+ return ret;
+}
+
+static int i2c_demux_deactivate_master(struct i2c_demux_pinctrl_priv *priv)
+{
+ int ret, cur = priv->cur_chan;
+
+ if (cur < 0)
+ return 0;
+
+ i2c_del_adapter(&priv->cur_adap);
+ i2c_put_adapter(priv->chan[cur].parent_adap);
+
+ ret = of_changeset_revert(&priv->chan[cur].chgset);
+
+ priv->chan[cur].parent_adap = NULL;
+ priv->cur_chan = -EINVAL;
+
+ return ret;
+}
+
+static int i2c_demux_change_master(struct i2c_demux_pinctrl_priv *priv, u32 new_chan)
+{
+ int ret;
+
+ if (new_chan == priv->cur_chan)
+ return 0;
+
+ ret = i2c_demux_deactivate_master(priv);
+ if (ret)
+ return ret;
+
+ return i2c_demux_activate_master(priv, new_chan);
+}
+
+static ssize_t cur_master_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_demux_pinctrl_priv *priv = dev_get_drvdata(dev);
+ int count = 0, i;
+
+ for (i = 0; i < priv->num_chan && count < PAGE_SIZE; i++)
+ count += scnprintf(buf + count, PAGE_SIZE - count, "%c %d - %s\n",
+ i == priv->cur_chan ? '*' : ' ', i,
+ priv->chan[i].parent_np->full_name);
+
+ return count;
+}
+
+static ssize_t cur_master_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_demux_pinctrl_priv *priv = dev_get_drvdata(dev);
+ unsigned int val;
+ int ret;
+
+ ret = kstrtouint(buf, 0, &val);
+ if (ret < 0)
+ return ret;
+
+ if (val >= priv->num_chan)
+ return -EINVAL;
+
+ ret = i2c_demux_change_master(priv, val);
+
+ return ret < 0 ? ret : count;
+}
+static DEVICE_ATTR_RW(cur_master);
+
+static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct i2c_demux_pinctrl_priv *priv;
+ int num_chan, i, j, err;
+
+ num_chan = of_count_phandle_with_args(np, "i2c-parent", NULL);
+ if (num_chan < 2) {
+ dev_err(&pdev->dev, "Need at least two I2C masters to switch\n");
+ return -EINVAL;
+ }
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv)
+ + num_chan * sizeof(struct i2c_demux_pinctrl_chan), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ err = of_property_read_string(np, "i2c-bus-name", &priv->bus_name);
+ if (err)
+ return err;
+
+ for (i = 0; i < num_chan; i++) {
+ struct device_node *adap_np;
+
+ adap_np = of_parse_phandle(np, "i2c-parent", i);
+ if (!adap_np) {
+ dev_err(&pdev->dev, "can't get phandle for parent %d\n", i);
+ err = -ENOENT;
+ goto err_rollback;
+ }
+ priv->chan[i].parent_np = adap_np;
+
+ of_changeset_init(&priv->chan[i].chgset);
+ of_changeset_update_property(&priv->chan[i].chgset, adap_np, &status_okay);
+ }
+
+ priv->num_chan = num_chan;
+ priv->dev = &pdev->dev;
+
+ platform_set_drvdata(pdev, priv);
+
+ /* switch to first parent as active master */
+ i2c_demux_activate_master(priv, 0);
+
+ err = device_create_file(&pdev->dev, &dev_attr_cur_master);
+ if (err)
+ goto err_rollback;
+
+ return 0;
+
+err_rollback:
+ for (j = 0; j < i; j++) {
+ of_node_put(priv->chan[j].parent_np);
+ of_changeset_destroy(&priv->chan[j].chgset);
+ }
+
+ return err;
+}
+
+static int i2c_demux_pinctrl_remove(struct platform_device *pdev)
+{
+ struct i2c_demux_pinctrl_priv *priv = platform_get_drvdata(pdev);
+ int i;
+
+ device_remove_file(&pdev->dev, &dev_attr_cur_master);
+
+ i2c_demux_deactivate_master(priv);
+
+ for (i = 0; i < priv->num_chan; i++) {
+ of_node_put(priv->chan[i].parent_np);
+ of_changeset_destroy(&priv->chan[i].chgset);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id i2c_demux_pinctrl_of_match[] = {
+ { .compatible = "i2c-demux-pinctrl", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, i2c_demux_pinctrl_of_match);
+
+static struct platform_driver i2c_demux_pinctrl_driver = {
+ .driver = {
+ .name = "i2c-demux-pinctrl",
+ .of_match_table = i2c_demux_pinctrl_of_match,
+ },
+ .probe = i2c_demux_pinctrl_probe,
+ .remove = i2c_demux_pinctrl_remove,
+};
+module_platform_driver(i2c_demux_pinctrl_driver);
+
+MODULE_DESCRIPTION("pinctrl-based I2C demux driver");
+MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c-demux-pinctrl");
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff