usb: gadget: remove langwell_udc
authorAlexander Shishkin <alexander.shishkin@linux.intel.com>
Fri, 11 May 2012 14:25:58 +0000 (17:25 +0300)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Sat, 12 May 2012 00:01:06 +0000 (17:01 -0700)
We have the chipidea driver now that supports both langwell and penwell,
so there is no need for this one any more.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/gadget/Kconfig
drivers/usb/gadget/Makefile
drivers/usb/gadget/langwell_udc.c [deleted file]
drivers/usb/gadget/langwell_udc.h [deleted file]
include/linux/usb/langwell_udc.h [deleted file]

index 1d7405c180d53340d013d6e4a2895ccb374b1c8e..11c2b21862ebe9af1ea8ffb6f76851a0c53bfe1c 100644 (file)
@@ -431,22 +431,6 @@ config USB_GOKU
           dynamically linked module called "goku_udc" and to force all
           gadget drivers to also be dynamically linked.
 
-config USB_LANGWELL
-       tristate "Intel Langwell USB Device Controller"
-       depends on PCI
-       depends on !PHYS_ADDR_T_64BIT
-       select USB_GADGET_DUALSPEED
-       help
-          Intel Langwell USB Device Controller is a High-Speed USB
-          On-The-Go device controller.
-
-          The number of programmable endpoints is different through
-          controller revision.
-
-          Say "y" to link the driver statically, or "m" to build a
-          dynamically linked module called "langwell_udc" and force all
-          gadget drivers to also be dynamically linked.
-
 config USB_EG20T
        tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
        depends on PCI
index 6ddfd26e8f38c3647215e9469dfbf6151c7abcf1..51019aa9a26855dc9b3b2e37dac2172e793df690 100644 (file)
@@ -24,7 +24,6 @@ obj-$(CONFIG_USB_R8A66597)    += r8a66597-udc.o
 obj-$(CONFIG_USB_FSL_QE)       += fsl_qe_udc.o
 obj-$(CONFIG_USB_S3C_HSOTG)    += s3c-hsotg.o
 obj-$(CONFIG_USB_S3C_HSUDC)    += s3c-hsudc.o
-obj-$(CONFIG_USB_LANGWELL)     += langwell_udc.o
 obj-$(CONFIG_USB_LPC32XX)      += lpc32xx_udc.o
 obj-$(CONFIG_USB_EG20T)                += pch_udc.o
 obj-$(CONFIG_USB_MV_UDC)       += mv_udc.o
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
deleted file mode 100644 (file)
index e119519..0000000
+++ /dev/null
@@ -1,3419 +0,0 @@
-/*
- * Intel Langwell USB Device Controller driver
- * Copyright (C) 2008-2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- */
-
-
-/* #undef      DEBUG */
-/* #undef      VERBOSE_DEBUG */
-
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
-#include <linux/device.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb/otg.h>
-#include <linux/pm.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <asm/unaligned.h>
-
-#include "langwell_udc.h"
-
-
-#define        DRIVER_DESC             "Intel Langwell USB Device Controller driver"
-#define        DRIVER_VERSION          "16 May 2009"
-
-static const char driver_name[] = "langwell_udc";
-static const char driver_desc[] = DRIVER_DESC;
-
-
-/* for endpoint 0 operations */
-static const struct usb_endpoint_descriptor
-langwell_ep0_desc = {
-       .bLength =              USB_DT_ENDPOINT_SIZE,
-       .bDescriptorType =      USB_DT_ENDPOINT,
-       .bEndpointAddress =     0,
-       .bmAttributes =         USB_ENDPOINT_XFER_CONTROL,
-       .wMaxPacketSize =       EP0_MAX_PKT_SIZE,
-};
-
-
-/*-------------------------------------------------------------------------*/
-/* debugging */
-
-#ifdef VERBOSE_DEBUG
-static inline void print_all_registers(struct langwell_udc *dev)
-{
-       int     i;
-
-       /* Capability Registers */
-       dev_dbg(&dev->pdev->dev,
-               "Capability Registers (offset: 0x%04x, length: 0x%08x)\n",
-               CAP_REG_OFFSET, (u32)sizeof(struct langwell_cap_regs));
-       dev_dbg(&dev->pdev->dev, "caplength=0x%02x\n",
-                       readb(&dev->cap_regs->caplength));
-       dev_dbg(&dev->pdev->dev, "hciversion=0x%04x\n",
-                       readw(&dev->cap_regs->hciversion));
-       dev_dbg(&dev->pdev->dev, "hcsparams=0x%08x\n",
-                       readl(&dev->cap_regs->hcsparams));
-       dev_dbg(&dev->pdev->dev, "hccparams=0x%08x\n",
-                       readl(&dev->cap_regs->hccparams));
-       dev_dbg(&dev->pdev->dev, "dciversion=0x%04x\n",
-                       readw(&dev->cap_regs->dciversion));
-       dev_dbg(&dev->pdev->dev, "dccparams=0x%08x\n",
-                       readl(&dev->cap_regs->dccparams));
-
-       /* Operational Registers */
-       dev_dbg(&dev->pdev->dev,
-               "Operational Registers (offset: 0x%04x, length: 0x%08x)\n",
-               OP_REG_OFFSET, (u32)sizeof(struct langwell_op_regs));
-       dev_dbg(&dev->pdev->dev, "extsts=0x%08x\n",
-                       readl(&dev->op_regs->extsts));
-       dev_dbg(&dev->pdev->dev, "extintr=0x%08x\n",
-                       readl(&dev->op_regs->extintr));
-       dev_dbg(&dev->pdev->dev, "usbcmd=0x%08x\n",
-                       readl(&dev->op_regs->usbcmd));
-       dev_dbg(&dev->pdev->dev, "usbsts=0x%08x\n",
-                       readl(&dev->op_regs->usbsts));
-       dev_dbg(&dev->pdev->dev, "usbintr=0x%08x\n",
-                       readl(&dev->op_regs->usbintr));
-       dev_dbg(&dev->pdev->dev, "frindex=0x%08x\n",
-                       readl(&dev->op_regs->frindex));
-       dev_dbg(&dev->pdev->dev, "ctrldssegment=0x%08x\n",
-                       readl(&dev->op_regs->ctrldssegment));
-       dev_dbg(&dev->pdev->dev, "deviceaddr=0x%08x\n",
-                       readl(&dev->op_regs->deviceaddr));
-       dev_dbg(&dev->pdev->dev, "endpointlistaddr=0x%08x\n",
-                       readl(&dev->op_regs->endpointlistaddr));
-       dev_dbg(&dev->pdev->dev, "ttctrl=0x%08x\n",
-                       readl(&dev->op_regs->ttctrl));
-       dev_dbg(&dev->pdev->dev, "burstsize=0x%08x\n",
-                       readl(&dev->op_regs->burstsize));
-       dev_dbg(&dev->pdev->dev, "txfilltuning=0x%08x\n",
-                       readl(&dev->op_regs->txfilltuning));
-       dev_dbg(&dev->pdev->dev, "txttfilltuning=0x%08x\n",
-                       readl(&dev->op_regs->txttfilltuning));
-       dev_dbg(&dev->pdev->dev, "ic_usb=0x%08x\n",
-                       readl(&dev->op_regs->ic_usb));
-       dev_dbg(&dev->pdev->dev, "ulpi_viewport=0x%08x\n",
-                       readl(&dev->op_regs->ulpi_viewport));
-       dev_dbg(&dev->pdev->dev, "configflag=0x%08x\n",
-                       readl(&dev->op_regs->configflag));
-       dev_dbg(&dev->pdev->dev, "portsc1=0x%08x\n",
-                       readl(&dev->op_regs->portsc1));
-       dev_dbg(&dev->pdev->dev, "devlc=0x%08x\n",
-                       readl(&dev->op_regs->devlc));
-       dev_dbg(&dev->pdev->dev, "otgsc=0x%08x\n",
-                       readl(&dev->op_regs->otgsc));
-       dev_dbg(&dev->pdev->dev, "usbmode=0x%08x\n",
-                       readl(&dev->op_regs->usbmode));
-       dev_dbg(&dev->pdev->dev, "endptnak=0x%08x\n",
-                       readl(&dev->op_regs->endptnak));
-       dev_dbg(&dev->pdev->dev, "endptnaken=0x%08x\n",
-                       readl(&dev->op_regs->endptnaken));
-       dev_dbg(&dev->pdev->dev, "endptsetupstat=0x%08x\n",
-                       readl(&dev->op_regs->endptsetupstat));
-       dev_dbg(&dev->pdev->dev, "endptprime=0x%08x\n",
-                       readl(&dev->op_regs->endptprime));
-       dev_dbg(&dev->pdev->dev, "endptflush=0x%08x\n",
-                       readl(&dev->op_regs->endptflush));
-       dev_dbg(&dev->pdev->dev, "endptstat=0x%08x\n",
-                       readl(&dev->op_regs->endptstat));
-       dev_dbg(&dev->pdev->dev, "endptcomplete=0x%08x\n",
-                       readl(&dev->op_regs->endptcomplete));
-
-       for (i = 0; i < dev->ep_max / 2; i++) {
-               dev_dbg(&dev->pdev->dev, "endptctrl[%d]=0x%08x\n",
-                               i, readl(&dev->op_regs->endptctrl[i]));
-       }
-}
-#else
-
-#define        print_all_registers(dev)        do { } while (0)
-
-#endif /* VERBOSE_DEBUG */
-
-
-/*-------------------------------------------------------------------------*/
-
-#define        is_in(ep)       (((ep)->ep_num == 0) ? ((ep)->dev->ep0_dir ==   \
-                       USB_DIR_IN) : (usb_endpoint_dir_in((ep)->ep.desc)))
-
-#define        DIR_STRING(ep)  (is_in(ep) ? "in" : "out")
-
-
-static char *type_string(const struct usb_endpoint_descriptor *desc)
-{
-       switch (usb_endpoint_type(desc)) {
-       case USB_ENDPOINT_XFER_BULK:
-               return "bulk";
-       case USB_ENDPOINT_XFER_ISOC:
-               return "iso";
-       case USB_ENDPOINT_XFER_INT:
-               return "int";
-       };
-
-       return "control";
-}
-
-
-/* configure endpoint control registers */
-static void ep_reset(struct langwell_ep *ep, unsigned char ep_num,
-               unsigned char is_in, unsigned char ep_type)
-{
-       struct langwell_udc     *dev;
-       u32                     endptctrl;
-
-       dev = ep->dev;
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
-       if (is_in) {    /* TX */
-               if (ep_num)
-                       endptctrl |= EPCTRL_TXR;
-               endptctrl |= EPCTRL_TXE;
-               endptctrl |= ep_type << EPCTRL_TXT_SHIFT;
-       } else {        /* RX */
-               if (ep_num)
-                       endptctrl |= EPCTRL_RXR;
-               endptctrl |= EPCTRL_RXE;
-               endptctrl |= ep_type << EPCTRL_RXT_SHIFT;
-       }
-
-       writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* reset ep0 dQH and endptctrl */
-static void ep0_reset(struct langwell_udc *dev)
-{
-       struct langwell_ep      *ep;
-       int                     i;
-
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       /* ep0 in and out */
-       for (i = 0; i < 2; i++) {
-               ep = &dev->ep[i];
-               ep->dev = dev;
-
-               /* ep0 dQH */
-               ep->dqh = &dev->ep_dqh[i];
-
-               /* configure ep0 endpoint capabilities in dQH */
-               ep->dqh->dqh_ios = 1;
-               ep->dqh->dqh_mpl = EP0_MAX_PKT_SIZE;
-
-               /* enable ep0-in HW zero length termination select */
-               if (is_in(ep))
-                       ep->dqh->dqh_zlt = 0;
-               ep->dqh->dqh_mult = 0;
-
-               ep->dqh->dtd_next = DTD_TERM;
-
-               /* configure ep0 control registers */
-               ep_reset(&dev->ep[0], 0, i, USB_ENDPOINT_XFER_CONTROL);
-       }
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* endpoints operations */
-
-/* configure endpoint, making it usable */
-static int langwell_ep_enable(struct usb_ep *_ep,
-               const struct usb_endpoint_descriptor *desc)
-{
-       struct langwell_udc     *dev;
-       struct langwell_ep      *ep;
-       u16                     max = 0;
-       unsigned long           flags;
-       int                     i, retval = 0;
-       unsigned char           zlt, ios = 0, mult = 0;
-
-       ep = container_of(_ep, struct langwell_ep, ep);
-       dev = ep->dev;
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       if (!_ep || !desc || ep->ep.desc
-                       || desc->bDescriptorType != USB_DT_ENDPOINT)
-               return -EINVAL;
-
-       if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
-               return -ESHUTDOWN;
-
-       max = usb_endpoint_maxp(desc);
-
-       /*
-        * disable HW zero length termination select
-        * driver handles zero length packet through req->req.zero
-        */
-       zlt = 1;
-
-       /*
-        * sanity check type, direction, address, and then
-        * initialize the endpoint capabilities fields in dQH
-        */
-       switch (usb_endpoint_type(desc)) {
-       case USB_ENDPOINT_XFER_CONTROL:
-               ios = 1;
-               break;
-       case USB_ENDPOINT_XFER_BULK:
-               if ((dev->gadget.speed == USB_SPEED_HIGH
-                                       && max != 512)
-                               || (dev->gadget.speed == USB_SPEED_FULL
-                                       && max > 64)) {
-                       goto done;
-               }
-               break;
-       case USB_ENDPOINT_XFER_INT:
-               if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
-                       goto done;
-
-               switch (dev->gadget.speed) {
-               case USB_SPEED_HIGH:
-                       if (max <= 1024)
-                               break;
-               case USB_SPEED_FULL:
-                       if (max <= 64)
-                               break;
-               default:
-                       if (max <= 8)
-                               break;
-                       goto done;
-               }
-               break;
-       case USB_ENDPOINT_XFER_ISOC:
-               if (strstr(ep->ep.name, "-bulk")
-                               || strstr(ep->ep.name, "-int"))
-                       goto done;
-
-               switch (dev->gadget.speed) {
-               case USB_SPEED_HIGH:
-                       if (max <= 1024)
-                               break;
-               case USB_SPEED_FULL:
-                       if (max <= 1023)
-                               break;
-               default:
-                       goto done;
-               }
-               /*
-                * FIXME:
-                * calculate transactions needed for high bandwidth iso
-                */
-               mult = (unsigned char)(1 + ((max >> 11) & 0x03));
-               max = max & 0x8ff;      /* bit 0~10 */
-               /* 3 transactions at most */
-               if (mult > 3)
-                       goto done;
-               break;
-       default:
-               goto done;
-       }
-
-       spin_lock_irqsave(&dev->lock, flags);
-
-       ep->ep.maxpacket = max;
-       ep->ep.desc = desc;
-       ep->stopped = 0;
-       ep->ep_num = usb_endpoint_num(desc);
-
-       /* ep_type */
-       ep->ep_type = usb_endpoint_type(desc);
-
-       /* configure endpoint control registers */
-       ep_reset(ep, ep->ep_num, is_in(ep), ep->ep_type);
-
-       /* configure endpoint capabilities in dQH */
-       i = ep->ep_num * 2 + is_in(ep);
-       ep->dqh = &dev->ep_dqh[i];
-       ep->dqh->dqh_ios = ios;
-       ep->dqh->dqh_mpl = cpu_to_le16(max);
-       ep->dqh->dqh_zlt = zlt;
-       ep->dqh->dqh_mult = mult;
-       ep->dqh->dtd_next = DTD_TERM;
-
-       dev_dbg(&dev->pdev->dev, "enabled %s (ep%d%s-%s), max %04x\n",
-                       _ep->name,
-                       ep->ep_num,
-                       DIR_STRING(ep),
-                       type_string(desc),
-                       max);
-
-       spin_unlock_irqrestore(&dev->lock, flags);
-done:
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return retval;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* retire a request */
-static void done(struct langwell_ep *ep, struct langwell_request *req,
-               int status)
-{
-       struct langwell_udc     *dev = ep->dev;
-       unsigned                stopped = ep->stopped;
-       struct langwell_dtd     *curr_dtd, *next_dtd;
-       int                     i;
-
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       /* remove the req from ep->queue */
-       list_del_init(&req->queue);
-
-       if (req->req.status == -EINPROGRESS)
-               req->req.status = status;
-       else
-               status = req->req.status;
-
-       /* free dTD for the request */
-       next_dtd = req->head;
-       for (i = 0; i < req->dtd_count; i++) {
-               curr_dtd = next_dtd;
-               if (i != req->dtd_count - 1)
-                       next_dtd = curr_dtd->next_dtd_virt;
-               dma_pool_free(dev->dtd_pool, curr_dtd, curr_dtd->dtd_dma);
-       }
-
-       usb_gadget_unmap_request(&dev->gadget, &req->req, is_in(ep));
-
-       if (status != -ESHUTDOWN)
-               dev_dbg(&dev->pdev->dev,
-                               "complete %s, req %p, stat %d, len %u/%u\n",
-                               ep->ep.name, &req->req, status,
-                               req->req.actual, req->req.length);
-
-       /* don't modify queue heads during completion callback */
-       ep->stopped = 1;
-
-       spin_unlock(&dev->lock);
-       /* complete routine from gadget driver */
-       if (req->req.complete)
-               req->req.complete(&ep->ep, &req->req);
-
-       spin_lock(&dev->lock);
-       ep->stopped = stopped;
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-static void langwell_ep_fifo_flush(struct usb_ep *_ep);
-
-/* delete all endpoint requests, called with spinlock held */
-static void nuke(struct langwell_ep *ep, int status)
-{
-       /* called with spinlock held */
-       ep->stopped = 1;
-
-       /* endpoint fifo flush */
-       if (&ep->ep && ep->ep.desc)
-               langwell_ep_fifo_flush(&ep->ep);
-
-       while (!list_empty(&ep->queue)) {
-               struct langwell_request *req = NULL;
-               req = list_entry(ep->queue.next, struct langwell_request,
-                               queue);
-               done(ep, req, status);
-       }
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* endpoint is no longer usable */
-static int langwell_ep_disable(struct usb_ep *_ep)
-{
-       struct langwell_ep      *ep;
-       unsigned long           flags;
-       struct langwell_udc     *dev;
-       int                     ep_num;
-       u32                     endptctrl;
-
-       ep = container_of(_ep, struct langwell_ep, ep);
-       dev = ep->dev;
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       if (!_ep || !ep->ep.desc)
-               return -EINVAL;
-
-       spin_lock_irqsave(&dev->lock, flags);
-
-       /* disable endpoint control register */
-       ep_num = ep->ep_num;
-       endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
-       if (is_in(ep))
-               endptctrl &= ~EPCTRL_TXE;
-       else
-               endptctrl &= ~EPCTRL_RXE;
-       writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
-       /* nuke all pending requests (does flush) */
-       nuke(ep, -ESHUTDOWN);
-
-       ep->ep.desc = NULL;
-       ep->stopped = 1;
-
-       spin_unlock_irqrestore(&dev->lock, flags);
-
-       dev_dbg(&dev->pdev->dev, "disabled %s\n", _ep->name);
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
-       return 0;
-}
-
-
-/* allocate a request object to use with this endpoint */
-static struct usb_request *langwell_alloc_request(struct usb_ep *_ep,
-               gfp_t gfp_flags)
-{
-       struct langwell_ep      *ep;
-       struct langwell_udc     *dev;
-       struct langwell_request *req = NULL;
-
-       if (!_ep)
-               return NULL;
-
-       ep = container_of(_ep, struct langwell_ep, ep);
-       dev = ep->dev;
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       req = kzalloc(sizeof(*req), gfp_flags);
-       if (!req)
-               return NULL;
-
-       req->req.dma = DMA_ADDR_INVALID;
-       INIT_LIST_HEAD(&req->queue);
-
-       dev_vdbg(&dev->pdev->dev, "alloc request for %s\n", _ep->name);
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return &req->req;
-}
-
-
-/* free a request object */
-static void langwell_free_request(struct usb_ep *_ep,
-               struct usb_request *_req)
-{
-       struct langwell_ep      *ep;
-       struct langwell_udc     *dev;
-       struct langwell_request *req = NULL;
-
-       ep = container_of(_ep, struct langwell_ep, ep);
-       dev = ep->dev;
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       if (!_ep || !_req)
-               return;
-
-       req = container_of(_req, struct langwell_request, req);
-       WARN_ON(!list_empty(&req->queue));
-
-       if (_req)
-               kfree(req);
-
-       dev_vdbg(&dev->pdev->dev, "free request for %s\n", _ep->name);
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* queue dTD and PRIME endpoint */
-static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
-{
-       u32                     bit_mask, usbcmd, endptstat, dtd_dma;
-       u8                      dtd_status;
-       int                     i;
-       struct langwell_dqh     *dqh;
-       struct langwell_udc     *dev;
-
-       dev = ep->dev;
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       i = ep->ep_num * 2 + is_in(ep);
-       dqh = &dev->ep_dqh[i];
-
-       if (ep->ep_num)
-               dev_vdbg(&dev->pdev->dev, "%s\n", ep->name);
-       else
-               /* ep0 */
-               dev_vdbg(&dev->pdev->dev, "%s-%s\n", ep->name, DIR_STRING(ep));
-
-       dev_vdbg(&dev->pdev->dev, "ep_dqh[%d] addr: 0x%p\n",
-                       i, &(dev->ep_dqh[i]));
-
-       bit_mask = is_in(ep) ?
-               (1 << (ep->ep_num + 16)) : (1 << (ep->ep_num));
-
-       dev_vdbg(&dev->pdev->dev, "bit_mask = 0x%08x\n", bit_mask);
-
-       /* check if the pipe is empty */
-       if (!(list_empty(&ep->queue))) {
-               /* add dTD to the end of linked list */
-               struct langwell_request *lastreq;
-               lastreq = list_entry(ep->queue.prev,
-                               struct langwell_request, queue);
-
-               lastreq->tail->dtd_next =
-                       cpu_to_le32(req->head->dtd_dma & DTD_NEXT_MASK);
-
-               /* read prime bit, if 1 goto out */
-               if (readl(&dev->op_regs->endptprime) & bit_mask)
-                       goto out;
-
-               do {
-                       /* set ATDTW bit in USBCMD */
-                       usbcmd = readl(&dev->op_regs->usbcmd);
-                       writel(usbcmd | CMD_ATDTW, &dev->op_regs->usbcmd);
-
-                       /* read correct status bit */
-                       endptstat = readl(&dev->op_regs->endptstat) & bit_mask;
-
-               } while (!(readl(&dev->op_regs->usbcmd) & CMD_ATDTW));
-
-               /* write ATDTW bit to 0 */
-               usbcmd = readl(&dev->op_regs->usbcmd);
-               writel(usbcmd & ~CMD_ATDTW, &dev->op_regs->usbcmd);
-
-               if (endptstat)
-                       goto out;
-       }
-
-       /* write dQH next pointer and terminate bit to 0 */
-       dtd_dma = req->head->dtd_dma & DTD_NEXT_MASK;
-       dqh->dtd_next = cpu_to_le32(dtd_dma);
-
-       /* clear active and halt bit */
-       dtd_status = (u8) ~(DTD_STS_ACTIVE | DTD_STS_HALTED);
-       dqh->dtd_status &= dtd_status;
-       dev_vdbg(&dev->pdev->dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status);
-
-       /* ensure that updates to the dQH will occur before priming */
-       wmb();
-
-       /* write 1 to endptprime register to PRIME endpoint */
-       bit_mask = is_in(ep) ? (1 << (ep->ep_num + 16)) : (1 << ep->ep_num);
-       dev_vdbg(&dev->pdev->dev, "endprime bit_mask = 0x%08x\n", bit_mask);
-       writel(bit_mask, &dev->op_regs->endptprime);
-out:
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return 0;
-}
-
-
-/* fill in the dTD structure to build a transfer descriptor */
-static struct langwell_dtd *build_dtd(struct langwell_request *req,
-               unsigned *length, dma_addr_t *dma, int *is_last)
-{
-       u32                      buf_ptr;
-       struct langwell_dtd     *dtd;
-       struct langwell_udc     *dev;
-       int                     i;
-
-       dev = req->ep->dev;
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       /* the maximum transfer length, up to 16k bytes */
-       *length = min(req->req.length - req->req.actual,
-                       (unsigned)DTD_MAX_TRANSFER_LENGTH);
-
-       /* create dTD dma_pool resource */
-       dtd = dma_pool_alloc(dev->dtd_pool, GFP_KERNEL, dma);
-       if (dtd == NULL)
-               return dtd;
-       dtd->dtd_dma = *dma;
-
-       /* initialize buffer page pointers */
-       buf_ptr = (u32)(req->req.dma + req->req.actual);
-       for (i = 0; i < 5; i++)
-               dtd->dtd_buf[i] = cpu_to_le32(buf_ptr + i * PAGE_SIZE);
-
-       req->req.actual += *length;
-
-       /* fill in total bytes with transfer size */
-       dtd->dtd_total = cpu_to_le16(*length);
-       dev_vdbg(&dev->pdev->dev, "dtd->dtd_total = %d\n", dtd->dtd_total);
-
-       /* set is_last flag if req->req.zero is set or not */
-       if (req->req.zero) {
-               if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
-                       *is_last = 1;
-               else
-                       *is_last = 0;
-       } else if (req->req.length == req->req.actual) {
-               *is_last = 1;
-       } else
-               *is_last = 0;
-
-       if (*is_last == 0)
-               dev_vdbg(&dev->pdev->dev, "multi-dtd request!\n");
-
-       /* set interrupt on complete bit for the last dTD */
-       if (*is_last && !req->req.no_interrupt)
-               dtd->dtd_ioc = 1;
-
-       /* set multiplier override 0 for non-ISO and non-TX endpoint */
-       dtd->dtd_multo = 0;
-
-       /* set the active bit of status field to 1 */
-       dtd->dtd_status = DTD_STS_ACTIVE;
-       dev_vdbg(&dev->pdev->dev, "dtd->dtd_status = 0x%02x\n",
-                       dtd->dtd_status);
-
-       dev_vdbg(&dev->pdev->dev, "length = %d, dma addr= 0x%08x\n",
-                       *length, (int)*dma);
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return dtd;
-}
-
-
-/* generate dTD linked list for a request */
-static int req_to_dtd(struct langwell_request *req)
-{
-       unsigned                count;
-       int                     is_last, is_first = 1;
-       struct langwell_dtd     *dtd, *last_dtd = NULL;
-       struct langwell_udc     *dev;
-       dma_addr_t              dma;
-
-       dev = req->ep->dev;
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-       do {
-               dtd = build_dtd(req, &count, &dma, &is_last);
-               if (dtd == NULL)
-                       return -ENOMEM;
-
-               if (is_first) {
-                       is_first = 0;
-                       req->head = dtd;
-               } else {
-                       last_dtd->dtd_next = cpu_to_le32(dma);
-                       last_dtd->next_dtd_virt = dtd;
-               }
-               last_dtd = dtd;
-               req->dtd_count++;
-       } while (!is_last);
-
-       /* set terminate bit to 1 for the last dTD */
-       dtd->dtd_next = DTD_TERM;
-
-       req->tail = dtd;
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* queue (submits) an I/O requests to an endpoint */
-static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
-               gfp_t gfp_flags)
-{
-       struct langwell_request *req;
-       struct langwell_ep      *ep;
-       struct langwell_udc     *dev;
-       unsigned long           flags;
-       int                     is_iso = 0;
-       int                     ret;
-
-       /* always require a cpu-view buffer */
-       req = container_of(_req, struct langwell_request, req);
-       ep = container_of(_ep, struct langwell_ep, ep);
-
-       if (!_req || !_req->complete || !_req->buf
-                       || !list_empty(&req->queue)) {
-               return -EINVAL;
-       }
-
-       if (unlikely(!_ep || !ep->ep.desc))
-               return -EINVAL;
-
-       dev = ep->dev;
-       req->ep = ep;
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       if (usb_endpoint_xfer_isoc(ep->ep.desc)) {
-               if (req->req.length > ep->ep.maxpacket)
-                       return -EMSGSIZE;
-               is_iso = 1;
-       }
-
-       if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
-               return -ESHUTDOWN;
-
-       /* set up dma mapping */
-       ret = usb_gadget_map_request(&dev->gadget, &req->req, is_in(ep));
-       if (ret)
-               return ret;
-
-       dev_dbg(&dev->pdev->dev,
-                       "%s queue req %p, len %u, buf %p, dma 0x%08x\n",
-                       _ep->name,
-                       _req, _req->length, _req->buf, (int)_req->dma);
-
-       _req->status = -EINPROGRESS;
-       _req->actual = 0;
-       req->dtd_count = 0;
-
-       spin_lock_irqsave(&dev->lock, flags);
-
-       /* build and put dTDs to endpoint queue */
-       if (!req_to_dtd(req)) {
-               queue_dtd(ep, req);
-       } else {
-               spin_unlock_irqrestore(&dev->lock, flags);
-               return -ENOMEM;
-       }
-
-       /* update ep0 state */
-       if (ep->ep_num == 0)
-               dev->ep0_state = DATA_STATE_XMIT;
-
-       if (likely(req != NULL)) {
-               list_add_tail(&req->queue, &ep->queue);
-               dev_vdbg(&dev->pdev->dev, "list_add_tail()\n");
-       }
-
-       spin_unlock_irqrestore(&dev->lock, flags);
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return 0;
-}
-
-
-/* dequeue (cancels, unlinks) an I/O request from an endpoint */
-static int langwell_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-{
-       struct langwell_ep      *ep;
-       struct langwell_udc     *dev;
-       struct langwell_request *req;
-       unsigned long           flags;
-       int                     stopped, ep_num, retval = 0;
-       u32                     endptctrl;
-
-       ep = container_of(_ep, struct langwell_ep, ep);
-       dev = ep->dev;
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       if (!_ep || !ep->ep.desc || !_req)
-               return -EINVAL;
-
-       if (!dev->driver)
-               return -ESHUTDOWN;
-
-       spin_lock_irqsave(&dev->lock, flags);
-       stopped = ep->stopped;
-
-       /* quiesce dma while we patch the queue */
-       ep->stopped = 1;
-       ep_num = ep->ep_num;
-
-       /* disable endpoint control register */
-       endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
-       if (is_in(ep))
-               endptctrl &= ~EPCTRL_TXE;
-       else
-               endptctrl &= ~EPCTRL_RXE;
-       writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
-       /* make sure it's still queued on this endpoint */
-       list_for_each_entry(req, &ep->queue, queue) {
-               if (&req->req == _req)
-                       break;
-       }
-
-       if (&req->req != _req) {
-               retval = -EINVAL;
-               goto done;
-       }
-
-       /* queue head may be partially complete. */
-       if (ep->queue.next == &req->queue) {
-               dev_dbg(&dev->pdev->dev, "unlink (%s) dma\n", _ep->name);
-               _req->status = -ECONNRESET;
-               langwell_ep_fifo_flush(&ep->ep);
-
-               /* not the last request in endpoint queue */
-               if (likely(ep->queue.next == &req->queue)) {
-                       struct langwell_dqh     *dqh;
-                       struct langwell_request *next_req;
-
-                       dqh = ep->dqh;
-                       next_req = list_entry(req->queue.next,
-                                       struct langwell_request, queue);
-
-                       /* point the dQH to the first dTD of next request */
-                       writel((u32) next_req->head, &dqh->dqh_current);
-               }
-       } else {
-               struct langwell_request *prev_req;
-
-               prev_req = list_entry(req->queue.prev,
-                               struct langwell_request, queue);
-               writel(readl(&req->tail->dtd_next),
-                               &prev_req->tail->dtd_next);
-       }
-
-       done(ep, req, -ECONNRESET);
-
-done:
-       /* enable endpoint again */
-       endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
-       if (is_in(ep))
-               endptctrl |= EPCTRL_TXE;
-       else
-               endptctrl |= EPCTRL_RXE;
-       writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
-       ep->stopped = stopped;
-       spin_unlock_irqrestore(&dev->lock, flags);
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return retval;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* endpoint set/clear halt */
-static void ep_set_halt(struct langwell_ep *ep, int value)
-{
-       u32                     endptctrl = 0;
-       int                     ep_num;
-       struct langwell_udc     *dev = ep->dev;
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       ep_num = ep->ep_num;
-       endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
-
-       /* value: 1 - set halt, 0 - clear halt */
-       if (value) {
-               /* set the stall bit */
-               if (is_in(ep))
-                       endptctrl |= EPCTRL_TXS;
-               else
-                       endptctrl |= EPCTRL_RXS;
-       } else {
-               /* clear the stall bit and reset data toggle */
-               if (is_in(ep)) {
-                       endptctrl &= ~EPCTRL_TXS;
-                       endptctrl |= EPCTRL_TXR;
-               } else {
-                       endptctrl &= ~EPCTRL_RXS;
-                       endptctrl |= EPCTRL_RXR;
-               }
-       }
-
-       writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* set the endpoint halt feature */
-static int langwell_ep_set_halt(struct usb_ep *_ep, int value)
-{
-       struct langwell_ep      *ep;
-       struct langwell_udc     *dev;
-       unsigned long           flags;
-       int                     retval = 0;
-
-       ep = container_of(_ep, struct langwell_ep, ep);
-       dev = ep->dev;
-
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       if (!_ep || !ep->ep.desc)
-               return -EINVAL;
-
-       if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
-               return -ESHUTDOWN;
-
-       if (usb_endpoint_xfer_isoc(ep->ep.desc))
-               return  -EOPNOTSUPP;
-
-       spin_lock_irqsave(&dev->lock, flags);
-
-       /*
-        * attempt to halt IN ep will fail if any transfer requests
-        * are still queue
-        */
-       if (!list_empty(&ep->queue) && is_in(ep) && value) {
-               /* IN endpoint FIFO holds bytes */
-               dev_dbg(&dev->pdev->dev, "%s FIFO holds bytes\n", _ep->name);
-               retval = -EAGAIN;
-               goto done;
-       }
-
-       /* endpoint set/clear halt */
-       if (ep->ep_num) {
-               ep_set_halt(ep, value);
-       } else { /* endpoint 0 */
-               dev->ep0_state = WAIT_FOR_SETUP;
-               dev->ep0_dir = USB_DIR_OUT;
-       }
-done:
-       spin_unlock_irqrestore(&dev->lock, flags);
-       dev_dbg(&dev->pdev->dev, "%s %s halt\n",
-                       _ep->name, value ? "set" : "clear");
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return retval;
-}
-
-
-/* set the halt feature and ignores clear requests */
-static int langwell_ep_set_wedge(struct usb_ep *_ep)
-{
-       struct langwell_ep      *ep;
-       struct langwell_udc     *dev;
-
-       ep = container_of(_ep, struct langwell_ep, ep);
-       dev = ep->dev;
-
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       if (!_ep || !ep->ep.desc)
-               return -EINVAL;
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return usb_ep_set_halt(_ep);
-}
-
-
-/* flush contents of a fifo */
-static void langwell_ep_fifo_flush(struct usb_ep *_ep)
-{
-       struct langwell_ep      *ep;
-       struct langwell_udc     *dev;
-       u32                     flush_bit;
-       unsigned long           timeout;
-
-       ep = container_of(_ep, struct langwell_ep, ep);
-       dev = ep->dev;
-
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       if (!_ep || !ep->ep.desc) {
-               dev_vdbg(&dev->pdev->dev, "ep or ep->ep.desc is NULL\n");
-               dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-               return;
-       }
-
-       dev_vdbg(&dev->pdev->dev, "%s-%s fifo flush\n",
-                       _ep->name, DIR_STRING(ep));
-
-       /* flush endpoint buffer */
-       if (ep->ep_num == 0)
-               flush_bit = (1 << 16) | 1;
-       else if (is_in(ep))
-               flush_bit = 1 << (ep->ep_num + 16);     /* TX */
-       else
-               flush_bit = 1 << ep->ep_num;            /* RX */
-
-       /* wait until flush complete */
-       timeout = jiffies + FLUSH_TIMEOUT;
-       do {
-               writel(flush_bit, &dev->op_regs->endptflush);
-               while (readl(&dev->op_regs->endptflush)) {
-                       if (time_after(jiffies, timeout)) {
-                               dev_err(&dev->pdev->dev, "ep flush timeout\n");
-                               goto done;
-                       }
-                       cpu_relax();
-               }
-       } while (readl(&dev->op_regs->endptstat) & flush_bit);
-done:
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* endpoints operations structure */
-static const struct usb_ep_ops langwell_ep_ops = {
-
-       /* configure endpoint, making it usable */
-       .enable         = langwell_ep_enable,
-
-       /* endpoint is no longer usable */
-       .disable        = langwell_ep_disable,
-
-       /* allocate a request object to use with this endpoint */
-       .alloc_request  = langwell_alloc_request,
-
-       /* free a request object */
-       .free_request   = langwell_free_request,
-
-       /* queue (submits) an I/O requests to an endpoint */
-       .queue          = langwell_ep_queue,
-
-       /* dequeue (cancels, unlinks) an I/O request from an endpoint */
-       .dequeue        = langwell_ep_dequeue,
-
-       /* set the endpoint halt feature */
-       .set_halt       = langwell_ep_set_halt,
-
-       /* set the halt feature and ignores clear requests */
-       .set_wedge      = langwell_ep_set_wedge,
-
-       /* flush contents of a fifo */
-       .fifo_flush     = langwell_ep_fifo_flush,
-};
-
-
-/*-------------------------------------------------------------------------*/
-
-/* device controller usb_gadget_ops structure */
-
-/* returns the current frame number */
-static int langwell_get_frame(struct usb_gadget *_gadget)
-{
-       struct langwell_udc     *dev;
-       u16                     retval;
-
-       if (!_gadget)
-               return -ENODEV;
-
-       dev = container_of(_gadget, struct langwell_udc, gadget);
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       retval = readl(&dev->op_regs->frindex) & FRINDEX_MASK;
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return retval;
-}
-
-
-/* enter or exit PHY low power state */
-static void langwell_phy_low_power(struct langwell_udc *dev, bool flag)
-{
-       u32             devlc;
-       u8              devlc_byte2;
-       dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       devlc = readl(&dev->op_regs->devlc);
-       dev_vdbg(&dev->pdev->dev, "devlc = 0x%08x\n", devlc);
-
-       if (flag)
-               devlc |= LPM_PHCD;
-       else
-               devlc &= ~LPM_PHCD;
-
-       /* FIXME: workaround for Langwell A1/A2/A3 sighting */
-       devlc_byte2 = (devlc >> 16) & 0xff;
-       writeb(devlc_byte2, (u8 *)&dev->op_regs->devlc + 2);
-
-       devlc = readl(&dev->op_regs->devlc);
-       dev_vdbg(&dev->pdev->dev,
-                       "%s PHY low power suspend, devlc = 0x%08x\n",
-                       flag ? "enter" : "exit", devlc);
-}
-
-
-/* tries to wake up the host connected to this gadget */
-static int langwell_wakeup(struct usb_gadget *_gadget)
-{
-       struct langwell_udc     *dev;
-       u32                     portsc1;
-       unsigned long           flags;
-
-       if (!_gadget)
-               return 0;
-
-       dev = container_of(_gadget, struct langwell_udc, gadget);
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       /* remote wakeup feature not enabled by host */
-       if (!dev->remote_wakeup) {
-               dev_info(&dev->pdev->dev, "remote wakeup is disabled\n");
-               return -ENOTSUPP;
-       }
-
-       spin_lock_irqsave(&dev->lock, flags);
-
-       portsc1 = readl(&dev->op_regs->portsc1);
-       if (!(portsc1 & PORTS_SUSP)) {
-               spin_unlock_irqrestore(&dev->lock, flags);
-               return 0;
-       }
-
-       /* LPM L1 to L0 or legacy remote wakeup */
-       if (dev->lpm && dev->lpm_state == LPM_L1)
-               dev_info(&dev->pdev->dev, "LPM L1 to L0 remote wakeup\n");
-       else
-               dev_info(&dev->pdev->dev, "device remote wakeup\n");
-
-       /* exit PHY low power suspend */
-       if (dev->pdev->device != 0x0829)
-               langwell_phy_low_power(dev, 0);
-
-       /* force port resume */
-       portsc1 |= PORTS_FPR;
-       writel(portsc1, &dev->op_regs->portsc1);
-
-       spin_unlock_irqrestore(&dev->lock, flags);
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return 0;
-}
-
-
-/* notify controller that VBUS is powered or not */
-static int langwell_vbus_session(struct usb_gadget *_gadget, int is_active)
-{
-       struct langwell_udc     *dev;
-       unsigned long           flags;
-       u32                     usbcmd;
-
-       if (!_gadget)
-               return -ENODEV;
-
-       dev = container_of(_gadget, struct langwell_udc, gadget);
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       spin_lock_irqsave(&dev->lock, flags);
-       dev_vdbg(&dev->pdev->dev, "VBUS status: %s\n",
-                       is_active ? "on" : "off");
-
-       dev->vbus_active = (is_active != 0);
-       if (dev->driver && dev->softconnected && dev->vbus_active) {
-               usbcmd = readl(&dev->op_regs->usbcmd);
-               usbcmd |= CMD_RUNSTOP;
-               writel(usbcmd, &dev->op_regs->usbcmd);
-       } else {
-               usbcmd = readl(&dev->op_regs->usbcmd);
-               usbcmd &= ~CMD_RUNSTOP;
-               writel(usbcmd, &dev->op_regs->usbcmd);
-       }
-
-       spin_unlock_irqrestore(&dev->lock, flags);
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return 0;
-}
-
-
-/* constrain controller's VBUS power usage */
-static int langwell_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
-{
-       struct langwell_udc     *dev;
-
-       if (!_gadget)
-               return -ENODEV;
-
-       dev = container_of(_gadget, struct langwell_udc, gadget);
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       if (dev->transceiver) {
-               dev_vdbg(&dev->pdev->dev, "usb_phy_set_power\n");
-               dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-               return usb_phy_set_power(dev->transceiver, mA);
-       }
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return -ENOTSUPP;
-}
-
-
-/* D+ pullup, software-controlled connect/disconnect to USB host */
-static int langwell_pullup(struct usb_gadget *_gadget, int is_on)
-{
-       struct langwell_udc     *dev;
-       u32                     usbcmd;
-       unsigned long           flags;
-
-       if (!_gadget)
-               return -ENODEV;
-
-       dev = container_of(_gadget, struct langwell_udc, gadget);
-
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       spin_lock_irqsave(&dev->lock, flags);
-       dev->softconnected = (is_on != 0);
-
-       if (dev->driver && dev->softconnected && dev->vbus_active) {
-               usbcmd = readl(&dev->op_regs->usbcmd);
-               usbcmd |= CMD_RUNSTOP;
-               writel(usbcmd, &dev->op_regs->usbcmd);
-       } else {
-               usbcmd = readl(&dev->op_regs->usbcmd);
-               usbcmd &= ~CMD_RUNSTOP;
-               writel(usbcmd, &dev->op_regs->usbcmd);
-       }
-       spin_unlock_irqrestore(&dev->lock, flags);
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return 0;
-}
-
-static int langwell_start(struct usb_gadget *g,
-               struct usb_gadget_driver *driver);
-
-static int langwell_stop(struct usb_gadget *g,
-               struct usb_gadget_driver *driver);
-
-/* device controller usb_gadget_ops structure */
-static const struct usb_gadget_ops langwell_ops = {
-
-       /* returns the current frame number */
-       .get_frame      = langwell_get_frame,
-
-       /* tries to wake up the host connected to this gadget */
-       .wakeup         = langwell_wakeup,
-
-       /* set the device selfpowered feature, always selfpowered */
-       /* .set_selfpowered = langwell_set_selfpowered, */
-
-       /* notify controller that VBUS is powered or not */
-       .vbus_session   = langwell_vbus_session,
-
-       /* constrain controller's VBUS power usage */
-       .vbus_draw      = langwell_vbus_draw,
-
-       /* D+ pullup, software-controlled connect/disconnect to USB host */
-       .pullup         = langwell_pullup,
-
-       .udc_start      = langwell_start,
-       .udc_stop       = langwell_stop,
-};
-
-
-/*-------------------------------------------------------------------------*/
-
-/* device controller operations */
-
-/* reset device controller */
-static int langwell_udc_reset(struct langwell_udc *dev)
-{
-       u32             usbcmd, usbmode, devlc, endpointlistaddr;
-       u8              devlc_byte0, devlc_byte2;
-       unsigned long   timeout;
-
-       if (!dev)
-               return -EINVAL;
-
-       dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       /* set controller to stop state */
-       usbcmd = readl(&dev->op_regs->usbcmd);
-       usbcmd &= ~CMD_RUNSTOP;
-       writel(usbcmd, &dev->op_regs->usbcmd);
-
-       /* reset device controller */
-       usbcmd = readl(&dev->op_regs->usbcmd);
-       usbcmd |= CMD_RST;
-       writel(usbcmd, &dev->op_regs->usbcmd);
-
-       /* wait for reset to complete */
-       timeout = jiffies + RESET_TIMEOUT;
-       while (readl(&dev->op_regs->usbcmd) & CMD_RST) {
-               if (time_after(jiffies, timeout)) {
-                       dev_err(&dev->pdev->dev, "device reset timeout\n");
-                       return -ETIMEDOUT;
-               }
-               cpu_relax();
-       }
-
-       /* set controller to device mode */
-       usbmode = readl(&dev->op_regs->usbmode);
-       usbmode |= MODE_DEVICE;
-
-       /* turn setup lockout off, require setup tripwire in usbcmd */
-       usbmode |= MODE_SLOM;
-
-       writel(usbmode, &dev->op_regs->usbmode);
-       usbmode = readl(&dev->op_regs->usbmode);
-       dev_vdbg(&dev->pdev->dev, "usbmode=0x%08x\n", usbmode);
-
-       /* Write-Clear setup status */
-       writel(0, &dev->op_regs->usbsts);
-
-       /* if support USB LPM, ACK all LPM token */
-       if (dev->lpm) {
-               devlc = readl(&dev->op_regs->devlc);
-               dev_vdbg(&dev->pdev->dev, "devlc = 0x%08x\n", devlc);
-               /* FIXME: workaround for Langwell A1/A2/A3 sighting */
-               devlc &= ~LPM_STL;      /* don't STALL LPM token */
-               devlc &= ~LPM_NYT_ACK;  /* ACK LPM token */
-               devlc_byte0 = devlc & 0xff;
-               devlc_byte2 = (devlc >> 16) & 0xff;
-               writeb(devlc_byte0, (u8 *)&dev->op_regs->devlc);
-               writeb(devlc_byte2, (u8 *)&dev->op_regs->devlc + 2);
-               devlc = readl(&dev->op_regs->devlc);
-               dev_vdbg(&dev->pdev->dev,
-                               "ACK LPM token, devlc = 0x%08x\n", devlc);
-       }
-
-       /* fill endpointlistaddr register */
-       endpointlistaddr = dev->ep_dqh_dma;
-       endpointlistaddr &= ENDPOINTLISTADDR_MASK;
-       writel(endpointlistaddr, &dev->op_regs->endpointlistaddr);
-
-       dev_vdbg(&dev->pdev->dev,
-               "dQH base (vir: %p, phy: 0x%08x), endpointlistaddr=0x%08x\n",
-               dev->ep_dqh, endpointlistaddr,
-               readl(&dev->op_regs->endpointlistaddr));
-       dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return 0;
-}
-
-
-/* reinitialize device controller endpoints */
-static int eps_reinit(struct langwell_udc *dev)
-{
-       struct langwell_ep      *ep;
-       char                    name[14];
-       int                     i;
-
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       /* initialize ep0 */
-       ep = &dev->ep[0];
-       ep->dev = dev;
-       strncpy(ep->name, "ep0", sizeof(ep->name));
-       ep->ep.name = ep->name;
-       ep->ep.ops = &langwell_ep_ops;
-       ep->stopped = 0;
-       ep->ep.maxpacket = EP0_MAX_PKT_SIZE;
-       ep->ep_num = 0;
-       ep->ep.desc = &langwell_ep0_desc;
-       INIT_LIST_HEAD(&ep->queue);
-
-       ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
-
-       /* initialize other endpoints */
-       for (i = 2; i < dev->ep_max; i++) {
-               ep = &dev->ep[i];
-               if (i % 2)
-                       snprintf(name, sizeof(name), "ep%din", i / 2);
-               else
-                       snprintf(name, sizeof(name), "ep%dout", i / 2);
-               ep->dev = dev;
-               strncpy(ep->name, name, sizeof(ep->name));
-               ep->ep.name = ep->name;
-
-               ep->ep.ops = &langwell_ep_ops;
-               ep->stopped = 0;
-               ep->ep.maxpacket = (unsigned short) ~0;
-               ep->ep_num = i / 2;
-
-               INIT_LIST_HEAD(&ep->queue);
-               list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
-       }
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return 0;
-}
-
-
-/* enable interrupt and set controller to run state */
-static void langwell_udc_start(struct langwell_udc *dev)
-{
-       u32     usbintr, usbcmd;
-       dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       /* enable interrupts */
-       usbintr = INTR_ULPIE    /* ULPI */
-               | INTR_SLE      /* suspend */
-               /* | INTR_SRE   SOF received */
-               | INTR_URE      /* USB reset */
-               | INTR_AAE      /* async advance */
-               | INTR_SEE      /* system error */
-               | INTR_FRE      /* frame list rollover */
-               | INTR_PCE      /* port change detect */
-               | INTR_UEE      /* USB error interrupt */
-               | INTR_UE;      /* USB interrupt */
-       writel(usbintr, &dev->op_regs->usbintr);
-
-       /* clear stopped bit */
-       dev->stopped = 0;
-
-       /* set controller to run */
-       usbcmd = readl(&dev->op_regs->usbcmd);
-       usbcmd |= CMD_RUNSTOP;
-       writel(usbcmd, &dev->op_regs->usbcmd);
-
-       dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* disable interrupt and set controller to stop state */
-static void langwell_udc_stop(struct langwell_udc *dev)
-{
-       u32     usbcmd;
-
-       dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       /* disable all interrupts */
-       writel(0, &dev->op_regs->usbintr);
-
-       /* set stopped bit */
-       dev->stopped = 1;
-
-       /* set controller to stop state */
-       usbcmd = readl(&dev->op_regs->usbcmd);
-       usbcmd &= ~CMD_RUNSTOP;
-       writel(usbcmd, &dev->op_regs->usbcmd);
-
-       dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* stop all USB activities */
-static void stop_activity(struct langwell_udc *dev)
-{
-       struct langwell_ep      *ep;
-       dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       nuke(&dev->ep[0], -ESHUTDOWN);
-
-       list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
-               nuke(ep, -ESHUTDOWN);
-       }
-
-       /* report disconnect; the driver is already quiesced */
-       if (dev->driver) {
-               spin_unlock(&dev->lock);
-               dev->driver->disconnect(&dev->gadget);
-               spin_lock(&dev->lock);
-       }
-
-       dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* device "function" sysfs attribute file */
-static ssize_t show_function(struct device *_dev,
-               struct device_attribute *attr, char *buf)
-{
-       struct langwell_udc     *dev = dev_get_drvdata(_dev);
-
-       if (!dev->driver || !dev->driver->function
-                       || strlen(dev->driver->function) > PAGE_SIZE)
-               return 0;
-
-       return scnprintf(buf, PAGE_SIZE, "%s\n", dev->driver->function);
-}
-static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
-
-
-static inline enum usb_device_speed lpm_device_speed(u32 reg)
-{
-       switch (LPM_PSPD(reg)) {
-       case LPM_SPEED_HIGH:
-               return USB_SPEED_HIGH;
-       case LPM_SPEED_FULL:
-               return USB_SPEED_FULL;
-       case LPM_SPEED_LOW:
-               return USB_SPEED_LOW;
-       default:
-               return USB_SPEED_UNKNOWN;
-       }
-}
-
-/* device "langwell_udc" sysfs attribute file */
-static ssize_t show_langwell_udc(struct device *_dev,
-               struct device_attribute *attr, char *buf)
-{
-       struct langwell_udc     *dev = dev_get_drvdata(_dev);
-       struct langwell_request *req;
-       struct langwell_ep      *ep = NULL;
-       char                    *next;
-       unsigned                size;
-       unsigned                t;
-       unsigned                i;
-       unsigned long           flags;
-       u32                     tmp_reg;
-
-       next = buf;
-       size = PAGE_SIZE;
-       spin_lock_irqsave(&dev->lock, flags);
-
-       /* driver basic information */
-       t = scnprintf(next, size,
-                       DRIVER_DESC "\n"
-                       "%s version: %s\n"
-                       "Gadget driver: %s\n\n",
-                       driver_name, DRIVER_VERSION,
-                       dev->driver ? dev->driver->driver.name : "(none)");
-       size -= t;
-       next += t;
-
-       /* device registers */
-       tmp_reg = readl(&dev->op_regs->usbcmd);
-       t = scnprintf(next, size,
-                       "USBCMD reg:\n"
-                       "SetupTW: %d\n"
-                       "Run/Stop: %s\n\n",
-                       (tmp_reg & CMD_SUTW) ? 1 : 0,
-                       (tmp_reg & CMD_RUNSTOP) ? "Run" : "Stop");
-       size -= t;
-       next += t;
-
-       tmp_reg = readl(&dev->op_regs->usbsts);
-       t = scnprintf(next, size,
-                       "USB Status Reg:\n"
-                       "Device Suspend: %d\n"
-                       "Reset Received: %d\n"
-                       "System Error: %s\n"
-                       "USB Error Interrupt: %s\n\n",
-                       (tmp_reg & STS_SLI) ? 1 : 0,
-                       (tmp_reg & STS_URI) ? 1 : 0,
-                       (tmp_reg & STS_SEI) ? "Error" : "No error",
-                       (tmp_reg & STS_UEI) ? "Error detected" : "No error");
-       size -= t;
-       next += t;
-
-       tmp_reg = readl(&dev->op_regs->usbintr);
-       t = scnprintf(next, size,
-                       "USB Intrrupt Enable Reg:\n"
-                       "Sleep Enable: %d\n"
-                       "SOF Received Enable: %d\n"
-                       "Reset Enable: %d\n"
-                       "System Error Enable: %d\n"
-                       "Port Change Dectected Enable: %d\n"
-                       "USB Error Intr Enable: %d\n"
-                       "USB Intr Enable: %d\n\n",
-                       (tmp_reg & INTR_SLE) ? 1 : 0,
-                       (tmp_reg & INTR_SRE) ? 1 : 0,
-                       (tmp_reg & INTR_URE) ? 1 : 0,
-                       (tmp_reg & INTR_SEE) ? 1 : 0,
-                       (tmp_reg & INTR_PCE) ? 1 : 0,
-                       (tmp_reg & INTR_UEE) ? 1 : 0,
-                       (tmp_reg & INTR_UE) ? 1 : 0);
-       size -= t;
-       next += t;
-
-       tmp_reg = readl(&dev->op_regs->frindex);
-       t = scnprintf(next, size,
-                       "USB Frame Index Reg:\n"
-                       "Frame Number is 0x%08x\n\n",
-                       (tmp_reg & FRINDEX_MASK));
-       size -= t;
-       next += t;
-
-       tmp_reg = readl(&dev->op_regs->deviceaddr);
-       t = scnprintf(next, size,
-                       "USB Device Address Reg:\n"
-                       "Device Addr is 0x%x\n\n",
-                       USBADR(tmp_reg));
-       size -= t;
-       next += t;
-
-       tmp_reg = readl(&dev->op_regs->endpointlistaddr);
-       t = scnprintf(next, size,
-                       "USB Endpoint List Address Reg:\n"
-                       "Endpoint List Pointer is 0x%x\n\n",
-                       EPBASE(tmp_reg));
-       size -= t;
-       next += t;
-
-       tmp_reg = readl(&dev->op_regs->portsc1);
-       t = scnprintf(next, size,
-               "USB Port Status & Control Reg:\n"
-               "Port Reset: %s\n"
-               "Port Suspend Mode: %s\n"
-               "Over-current Change: %s\n"
-               "Port Enable/Disable Change: %s\n"
-               "Port Enabled/Disabled: %s\n"
-               "Current Connect Status: %s\n"
-               "LPM Suspend Status: %s\n\n",
-               (tmp_reg & PORTS_PR) ? "Reset" : "Not Reset",
-               (tmp_reg & PORTS_SUSP) ? "Suspend " : "Not Suspend",
-               (tmp_reg & PORTS_OCC) ? "Detected" : "No",
-               (tmp_reg & PORTS_PEC) ? "Changed" : "Not Changed",
-               (tmp_reg & PORTS_PE) ? "Enable" : "Not Correct",
-               (tmp_reg & PORTS_CCS) ?  "Attached" : "Not Attached",
-               (tmp_reg & PORTS_SLP) ? "LPM L1" : "LPM L0");
-       size -= t;
-       next += t;
-
-       tmp_reg = readl(&dev->op_regs->devlc);
-       t = scnprintf(next, size,
-               "Device LPM Control Reg:\n"
-               "Parallel Transceiver : %d\n"
-               "Serial Transceiver : %d\n"
-               "Port Speed: %s\n"
-               "Port Force Full Speed Connenct: %s\n"
-               "PHY Low Power Suspend Clock: %s\n"
-               "BmAttributes: %d\n\n",
-               LPM_PTS(tmp_reg),
-               (tmp_reg & LPM_STS) ? 1 : 0,
-               usb_speed_string(lpm_device_speed(tmp_reg)),
-               (tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force",
-               (tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled",
-               LPM_BA(tmp_reg));
-       size -= t;
-       next += t;
-
-       tmp_reg = readl(&dev->op_regs->usbmode);
-       t = scnprintf(next, size,
-                       "USB Mode Reg:\n"
-                       "Controller Mode is : %s\n\n", ({
-                               char *s;
-                               switch (MODE_CM(tmp_reg)) {
-                               case MODE_IDLE:
-                                       s = "Idle"; break;
-                               case MODE_DEVICE:
-                                       s = "Device Controller"; break;
-                               case MODE_HOST:
-                                       s = "Host Controller"; break;
-                               default:
-                                       s = "None"; break;
-                               }
-                               s;
-                       }));
-       size -= t;
-       next += t;
-
-       tmp_reg = readl(&dev->op_regs->endptsetupstat);
-       t = scnprintf(next, size,
-                       "Endpoint Setup Status Reg:\n"
-                       "SETUP on ep 0x%04x\n\n",
-                       tmp_reg & SETUPSTAT_MASK);
-       size -= t;
-       next += t;
-
-       for (i = 0; i < dev->ep_max / 2; i++) {
-               tmp_reg = readl(&dev->op_regs->endptctrl[i]);
-               t = scnprintf(next, size, "EP Ctrl Reg [%d]: 0x%08x\n",
-                               i, tmp_reg);
-               size -= t;
-               next += t;
-       }
-       tmp_reg = readl(&dev->op_regs->endptprime);
-       t = scnprintf(next, size, "EP Prime Reg: 0x%08x\n\n", tmp_reg);
-       size -= t;
-       next += t;
-
-       /* langwell_udc, langwell_ep, langwell_request structure information */
-       ep = &dev->ep[0];
-       t = scnprintf(next, size, "%s MaxPacketSize: 0x%x, ep_num: %d\n",
-                       ep->ep.name, ep->ep.maxpacket, ep->ep_num);
-       size -= t;
-       next += t;
-
-       if (list_empty(&ep->queue)) {
-               t = scnprintf(next, size, "its req queue is empty\n\n");
-               size -= t;
-               next += t;
-       } else {
-               list_for_each_entry(req, &ep->queue, queue) {
-                       t = scnprintf(next, size,
-                               "req %p actual 0x%x length 0x%x  buf %p\n",
-                               &req->req, req->req.actual,
-                               req->req.length, req->req.buf);
-                       size -= t;
-                       next += t;
-               }
-       }
-       /* other gadget->eplist ep */
-       list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
-               if (ep->ep.desc) {
-                       t = scnprintf(next, size,
-                                       "\n%s MaxPacketSize: 0x%x, "
-                                       "ep_num: %d\n",
-                                       ep->ep.name, ep->ep.maxpacket,
-                                       ep->ep_num);
-                       size -= t;
-                       next += t;
-
-                       if (list_empty(&ep->queue)) {
-                               t = scnprintf(next, size,
-                                               "its req queue is empty\n\n");
-                               size -= t;
-                               next += t;
-                       } else {
-                               list_for_each_entry(req, &ep->queue, queue) {
-                                       t = scnprintf(next, size,
-                                               "req %p actual 0x%x length "
-                                               "0x%x  buf %p\n",
-                                               &req->req, req->req.actual,
-                                               req->req.length, req->req.buf);
-                                       size -= t;
-                                       next += t;
-                               }
-                       }
-               }
-       }
-
-       spin_unlock_irqrestore(&dev->lock, flags);
-       return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(langwell_udc, S_IRUGO, show_langwell_udc, NULL);
-
-
-/* device "remote_wakeup" sysfs attribute file */
-static ssize_t store_remote_wakeup(struct device *_dev,
-               struct device_attribute *attr, const char *buf, size_t count)
-{
-       struct langwell_udc     *dev = dev_get_drvdata(_dev);
-       unsigned long           flags;
-       ssize_t                 rc = count;
-
-       if (count > 2)
-               return -EINVAL;
-
-       if (count > 0 && buf[count-1] == '\n')
-               ((char *) buf)[count-1] = 0;
-
-       if (buf[0] != '1')
-               return -EINVAL;
-
-       /* force remote wakeup enabled in case gadget driver doesn't support */
-       spin_lock_irqsave(&dev->lock, flags);
-       dev->remote_wakeup = 1;
-       dev->dev_status |= (1 << USB_DEVICE_REMOTE_WAKEUP);
-       spin_unlock_irqrestore(&dev->lock, flags);
-
-       langwell_wakeup(&dev->gadget);
-
-       return rc;
-}
-static DEVICE_ATTR(remote_wakeup, S_IWUSR, NULL, store_remote_wakeup);
-
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * when a driver is successfully registered, it will receive
- * control requests including set_configuration(), which enables
- * non-control requests.  then usb traffic follows until a
- * disconnect is reported.  then a host may connect again, or
- * the driver might get unbound.
- */
-
-static int langwell_start(struct usb_gadget *g,
-               struct usb_gadget_driver *driver)
-{
-       struct langwell_udc     *dev = gadget_to_langwell(g);
-       unsigned long           flags;
-       int                     retval;
-
-       dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       spin_lock_irqsave(&dev->lock, flags);
-
-       /* hook up the driver ... */
-       driver->driver.bus = NULL;
-       dev->driver = driver;
-       dev->gadget.dev.driver = &driver->driver;
-
-       spin_unlock_irqrestore(&dev->lock, flags);
-
-       retval = device_create_file(&dev->pdev->dev, &dev_attr_function);
-       if (retval)
-               goto err;
-
-       dev->usb_state = USB_STATE_ATTACHED;
-       dev->ep0_state = WAIT_FOR_SETUP;
-       dev->ep0_dir = USB_DIR_OUT;
-
-       /* enable interrupt and set controller to run state */
-       if (dev->got_irq)
-               langwell_udc_start(dev);
-
-       dev_vdbg(&dev->pdev->dev,
-                       "After langwell_udc_start(), print all registers:\n");
-       print_all_registers(dev);
-
-       dev_info(&dev->pdev->dev, "register driver: %s\n",
-                       driver->driver.name);
-       dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
-       return 0;
-
-err:
-       dev->gadget.dev.driver = NULL;
-       dev->driver = NULL;
-
-       dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
-       return retval;
-}
-
-/* unregister gadget driver */
-static int langwell_stop(struct usb_gadget *g,
-               struct usb_gadget_driver *driver)
-{
-       struct langwell_udc     *dev = gadget_to_langwell(g);
-       unsigned long           flags;
-
-       dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       /* exit PHY low power suspend */
-       if (dev->pdev->device != 0x0829)
-               langwell_phy_low_power(dev, 0);
-
-       /* unbind OTG transceiver */
-       if (dev->transceiver)
-               (void)otg_set_peripheral(dev->transceiver->otg, 0);
-
-       /* disable interrupt and set controller to stop state */
-       langwell_udc_stop(dev);
-
-       dev->usb_state = USB_STATE_ATTACHED;
-       dev->ep0_state = WAIT_FOR_SETUP;
-       dev->ep0_dir = USB_DIR_OUT;
-
-       spin_lock_irqsave(&dev->lock, flags);
-
-       /* stop all usb activities */
-       dev->gadget.speed = USB_SPEED_UNKNOWN;
-       dev->gadget.dev.driver = NULL;
-       dev->driver = NULL;
-       stop_activity(dev);
-       spin_unlock_irqrestore(&dev->lock, flags);
-
-       device_remove_file(&dev->pdev->dev, &dev_attr_function);
-
-       dev_info(&dev->pdev->dev, "unregistered driver '%s'\n",
-                       driver->driver.name);
-       dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
-       return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * setup tripwire is used as a semaphore to ensure that the setup data
- * payload is extracted from a dQH without being corrupted
- */
-static void setup_tripwire(struct langwell_udc *dev)
-{
-       u32                     usbcmd,
-                               endptsetupstat;
-       unsigned long           timeout;
-       struct langwell_dqh     *dqh;
-
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       /* ep0 OUT dQH */
-       dqh = &dev->ep_dqh[EP_DIR_OUT];
-
-       /* Write-Clear endptsetupstat */
-       endptsetupstat = readl(&dev->op_regs->endptsetupstat);
-       writel(endptsetupstat, &dev->op_regs->endptsetupstat);
-
-       /* wait until endptsetupstat is cleared */
-       timeout = jiffies + SETUPSTAT_TIMEOUT;
-       while (readl(&dev->op_regs->endptsetupstat)) {
-               if (time_after(jiffies, timeout)) {
-                       dev_err(&dev->pdev->dev, "setup_tripwire timeout\n");
-                       break;
-               }
-               cpu_relax();
-       }
-
-       /* while a hazard exists when setup packet arrives */
-       do {
-               /* set setup tripwire bit */
-               usbcmd = readl(&dev->op_regs->usbcmd);
-               writel(usbcmd | CMD_SUTW, &dev->op_regs->usbcmd);
-
-               /* copy the setup packet to local buffer */
-               memcpy(&dev->local_setup_buff, &dqh->dqh_setup, 8);
-       } while (!(readl(&dev->op_regs->usbcmd) & CMD_SUTW));
-
-       /* Write-Clear setup tripwire bit */
-       usbcmd = readl(&dev->op_regs->usbcmd);
-       writel(usbcmd & ~CMD_SUTW, &dev->op_regs->usbcmd);
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* protocol ep0 stall, will automatically be cleared on new transaction */
-static void ep0_stall(struct langwell_udc *dev)
-{
-       u32     endptctrl;
-
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       /* set TX and RX to stall */
-       endptctrl = readl(&dev->op_regs->endptctrl[0]);
-       endptctrl |= EPCTRL_TXS | EPCTRL_RXS;
-       writel(endptctrl, &dev->op_regs->endptctrl[0]);
-
-       /* update ep0 state */
-       dev->ep0_state = WAIT_FOR_SETUP;
-       dev->ep0_dir = USB_DIR_OUT;
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* PRIME a status phase for ep0 */
-static int prime_status_phase(struct langwell_udc *dev, int dir)
-{
-       struct langwell_request *req;
-       struct langwell_ep      *ep;
-       int                     status = 0;
-
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       if (dir == EP_DIR_IN)
-               dev->ep0_dir = USB_DIR_IN;
-       else
-               dev->ep0_dir = USB_DIR_OUT;
-
-       ep = &dev->ep[0];
-       dev->ep0_state = WAIT_FOR_OUT_STATUS;
-
-       req = dev->status_req;
-
-       req->ep = ep;
-       req->req.length = 0;
-       req->req.status = -EINPROGRESS;
-       req->req.actual = 0;
-       req->req.complete = NULL;
-       req->dtd_count = 0;
-
-       if (!req_to_dtd(req))
-               status = queue_dtd(ep, req);
-       else
-               return -ENOMEM;
-
-       if (status)
-               dev_err(&dev->pdev->dev, "can't queue ep0 status request\n");
-
-       list_add_tail(&req->queue, &ep->queue);
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return status;
-}
-
-
-/* SET_ADDRESS request routine */
-static void set_address(struct langwell_udc *dev, u16 value,
-               u16 index, u16 length)
-{
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       /* save the new address to device struct */
-       dev->dev_addr = (u8) value;
-       dev_vdbg(&dev->pdev->dev, "dev->dev_addr = %d\n", dev->dev_addr);
-
-       /* update usb state */
-       dev->usb_state = USB_STATE_ADDRESS;
-
-       /* STATUS phase */
-       if (prime_status_phase(dev, EP_DIR_IN))
-               ep0_stall(dev);
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* return endpoint by windex */
-static struct langwell_ep *get_ep_by_windex(struct langwell_udc *dev,
-               u16 wIndex)
-{
-       struct langwell_ep              *ep;
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
-               return &dev->ep[0];
-
-       list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
-               u8      bEndpointAddress;
-               if (!ep->ep.desc)
-                       continue;
-
-               bEndpointAddress = ep->ep.desc->bEndpointAddress;
-               if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
-                       continue;
-
-               if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
-                       == (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
-                       return ep;
-       }
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return NULL;
-}
-
-
-/* return whether endpoint is stalled, 0: not stalled; 1: stalled */
-static int ep_is_stall(struct langwell_ep *ep)
-{
-       struct langwell_udc     *dev = ep->dev;
-       u32                     endptctrl;
-       int                     retval;
-
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       endptctrl = readl(&dev->op_regs->endptctrl[ep->ep_num]);
-       if (is_in(ep))
-               retval = endptctrl & EPCTRL_TXS ? 1 : 0;
-       else
-               retval = endptctrl & EPCTRL_RXS ? 1 : 0;
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return retval;
-}
-
-
-/* GET_STATUS request routine */
-static void get_status(struct langwell_udc *dev, u8 request_type, u16 value,
-               u16 index, u16 length)
-{
-       struct langwell_request *req;
-       struct langwell_ep      *ep;
-       u16     status_data = 0;        /* 16 bits cpu view status data */
-       int     status = 0;
-
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       ep = &dev->ep[0];
-
-       if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
-               /* get device status */
-               status_data = dev->dev_status;
-       } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
-               /* get interface status */
-               status_data = 0;
-       } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
-               /* get endpoint status */
-               struct langwell_ep      *epn;
-               epn = get_ep_by_windex(dev, index);
-               /* stall if endpoint doesn't exist */
-               if (!epn)
-                       goto stall;
-
-               status_data = ep_is_stall(epn) << USB_ENDPOINT_HALT;
-       }
-
-       dev_dbg(&dev->pdev->dev, "get status data: 0x%04x\n", status_data);
-
-       dev->ep0_dir = USB_DIR_IN;
-
-       /* borrow the per device status_req */
-       req = dev->status_req;
-
-       /* fill in the reqest structure */
-       *((u16 *) req->req.buf) = cpu_to_le16(status_data);
-       req->ep = ep;
-       req->req.length = 2;
-       req->req.status = -EINPROGRESS;
-       req->req.actual = 0;
-       req->req.complete = NULL;
-       req->dtd_count = 0;
-
-       /* prime the data phase */
-       if (!req_to_dtd(req))
-               status = queue_dtd(ep, req);
-       else                    /* no mem */
-               goto stall;
-
-       if (status) {
-               dev_err(&dev->pdev->dev,
-                               "response error on GET_STATUS request\n");
-               goto stall;
-       }
-
-       list_add_tail(&req->queue, &ep->queue);
-       dev->ep0_state = DATA_STATE_XMIT;
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return;
-stall:
-       ep0_stall(dev);
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* setup packet interrupt handler */
-static void handle_setup_packet(struct langwell_udc *dev,
-               struct usb_ctrlrequest *setup)
-{
-       u16     wValue = le16_to_cpu(setup->wValue);
-       u16     wIndex = le16_to_cpu(setup->wIndex);
-       u16     wLength = le16_to_cpu(setup->wLength);
-       u32     portsc1;
-
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       /* ep0 fifo flush */
-       nuke(&dev->ep[0], -ESHUTDOWN);
-
-       dev_dbg(&dev->pdev->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
-                       setup->bRequestType, setup->bRequest,
-                       wValue, wIndex, wLength);
-
-       /* RNDIS gadget delegate */
-       if ((setup->bRequestType == 0x21) && (setup->bRequest == 0x00)) {
-               /* USB_CDC_SEND_ENCAPSULATED_COMMAND */
-               goto delegate;
-       }
-
-       /* USB_CDC_GET_ENCAPSULATED_RESPONSE */
-       if ((setup->bRequestType == 0xa1) && (setup->bRequest == 0x01)) {
-               /* USB_CDC_GET_ENCAPSULATED_RESPONSE */
-               goto delegate;
-       }
-
-       /* We process some stardard setup requests here */
-       switch (setup->bRequest) {
-       case USB_REQ_GET_STATUS:
-               dev_dbg(&dev->pdev->dev, "SETUP: USB_REQ_GET_STATUS\n");
-               /* get status, DATA and STATUS phase */
-               if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
-                                       != (USB_DIR_IN | USB_TYPE_STANDARD))
-                       break;
-               get_status(dev, setup->bRequestType, wValue, wIndex, wLength);
-               goto end;
-
-       case USB_REQ_SET_ADDRESS:
-               dev_dbg(&dev->pdev->dev, "SETUP: USB_REQ_SET_ADDRESS\n");
-               /* STATUS phase */
-               if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD
-                                               | USB_RECIP_DEVICE))
-                       break;
-               set_address(dev, wValue, wIndex, wLength);
-               goto end;
-
-       case USB_REQ_CLEAR_FEATURE:
-       case USB_REQ_SET_FEATURE:
-               /* STATUS phase */
-       {
-               int rc = -EOPNOTSUPP;
-               if (setup->bRequest == USB_REQ_SET_FEATURE)
-                       dev_dbg(&dev->pdev->dev,
-                                       "SETUP: USB_REQ_SET_FEATURE\n");
-               else if (setup->bRequest == USB_REQ_CLEAR_FEATURE)
-                       dev_dbg(&dev->pdev->dev,
-                                       "SETUP: USB_REQ_CLEAR_FEATURE\n");
-
-               if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK))
-                               == (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) {
-                       struct langwell_ep      *epn;
-                       epn = get_ep_by_windex(dev, wIndex);
-                       /* stall if endpoint doesn't exist */
-                       if (!epn) {
-                               ep0_stall(dev);
-                               goto end;
-                       }
-
-                       if (wValue != 0 || wLength != 0
-                                       || epn->ep_num > dev->ep_max)
-                               break;
-
-                       spin_unlock(&dev->lock);
-                       rc = langwell_ep_set_halt(&epn->ep,
-                               (setup->bRequest == USB_REQ_SET_FEATURE)
-                               ? 1 : 0);
-                       spin_lock(&dev->lock);
-
-               } else if ((setup->bRequestType & (USB_RECIP_MASK
-                               | USB_TYPE_MASK)) == (USB_RECIP_DEVICE
-                               | USB_TYPE_STANDARD)) {
-                       rc = 0;
-                       switch (wValue) {
-                       case USB_DEVICE_REMOTE_WAKEUP:
-                               if (setup->bRequest == USB_REQ_SET_FEATURE) {
-                                       dev->remote_wakeup = 1;
-                                       dev->dev_status |= (1 << wValue);
-                               } else {
-                                       dev->remote_wakeup = 0;
-                                       dev->dev_status &= ~(1 << wValue);
-                               }
-                               break;
-                       case USB_DEVICE_TEST_MODE:
-                               dev_dbg(&dev->pdev->dev, "SETUP: TEST MODE\n");
-                               if ((wIndex & 0xff) ||
-                                       (dev->gadget.speed != USB_SPEED_HIGH))
-                                       ep0_stall(dev);
-
-                               switch (wIndex >> 8) {
-                               case TEST_J:
-                               case TEST_K:
-                               case TEST_SE0_NAK:
-                               case TEST_PACKET:
-                               case TEST_FORCE_EN:
-                                       if (prime_status_phase(dev, EP_DIR_IN))
-                                               ep0_stall(dev);
-                                       portsc1 = readl(&dev->op_regs->portsc1);
-                                       portsc1 |= (wIndex & 0xf00) << 8;
-                                       writel(portsc1, &dev->op_regs->portsc1);
-                                       goto end;
-                               default:
-                                       rc = -EOPNOTSUPP;
-                               }
-                               break;
-                       default:
-                               rc = -EOPNOTSUPP;
-                               break;
-                       }
-
-                       if (!gadget_is_otg(&dev->gadget))
-                               break;
-                       else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE)
-                               dev->gadget.b_hnp_enable = 1;
-                       else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
-                               dev->gadget.a_hnp_support = 1;
-                       else if (setup->bRequest ==
-                                       USB_DEVICE_A_ALT_HNP_SUPPORT)
-                               dev->gadget.a_alt_hnp_support = 1;
-                       else
-                               break;
-               } else
-                       break;
-
-               if (rc == 0) {
-                       if (prime_status_phase(dev, EP_DIR_IN))
-                               ep0_stall(dev);
-               }
-               goto end;
-       }
-
-       case USB_REQ_GET_DESCRIPTOR:
-               dev_dbg(&dev->pdev->dev,
-                               "SETUP: USB_REQ_GET_DESCRIPTOR\n");
-               goto delegate;
-
-       case USB_REQ_SET_DESCRIPTOR:
-               dev_dbg(&dev->pdev->dev,
-                               "SETUP: USB_REQ_SET_DESCRIPTOR unsupported\n");
-               goto delegate;
-
-       case USB_REQ_GET_CONFIGURATION:
-               dev_dbg(&dev->pdev->dev,
-                               "SETUP: USB_REQ_GET_CONFIGURATION\n");
-               goto delegate;
-
-       case USB_REQ_SET_CONFIGURATION:
-               dev_dbg(&dev->pdev->dev,
-                               "SETUP: USB_REQ_SET_CONFIGURATION\n");
-               goto delegate;
-
-       case USB_REQ_GET_INTERFACE:
-               dev_dbg(&dev->pdev->dev,
-                               "SETUP: USB_REQ_GET_INTERFACE\n");
-               goto delegate;
-
-       case USB_REQ_SET_INTERFACE:
-               dev_dbg(&dev->pdev->dev,
-                               "SETUP: USB_REQ_SET_INTERFACE\n");
-               goto delegate;
-
-       case USB_REQ_SYNCH_FRAME:
-               dev_dbg(&dev->pdev->dev,
-                               "SETUP: USB_REQ_SYNCH_FRAME unsupported\n");
-               goto delegate;
-
-       default:
-               /* delegate USB standard requests to the gadget driver */
-               goto delegate;
-delegate:
-               /* USB requests handled by gadget */
-               if (wLength) {
-                       /* DATA phase from gadget, STATUS phase from udc */
-                       dev->ep0_dir = (setup->bRequestType & USB_DIR_IN)
-                                       ?  USB_DIR_IN : USB_DIR_OUT;
-                       dev_vdbg(&dev->pdev->dev,
-                                       "dev->ep0_dir = 0x%x, wLength = %d\n",
-                                       dev->ep0_dir, wLength);
-                       spin_unlock(&dev->lock);
-                       if (dev->driver->setup(&dev->gadget,
-                                       &dev->local_setup_buff) < 0)
-                               ep0_stall(dev);
-                       spin_lock(&dev->lock);
-                       dev->ep0_state = (setup->bRequestType & USB_DIR_IN)
-                                       ?  DATA_STATE_XMIT : DATA_STATE_RECV;
-               } else {
-                       /* no DATA phase, IN STATUS phase from gadget */
-                       dev->ep0_dir = USB_DIR_IN;
-                       dev_vdbg(&dev->pdev->dev,
-                                       "dev->ep0_dir = 0x%x, wLength = %d\n",
-                                       dev->ep0_dir, wLength);
-                       spin_unlock(&dev->lock);
-                       if (dev->driver->setup(&dev->gadget,
-                                       &dev->local_setup_buff) < 0)
-                               ep0_stall(dev);
-                       spin_lock(&dev->lock);
-                       dev->ep0_state = WAIT_FOR_OUT_STATUS;
-               }
-               break;
-       }
-end:
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* transfer completion, process endpoint request and free the completed dTDs
- * for this request
- */
-static int process_ep_req(struct langwell_udc *dev, int index,
-               struct langwell_request *curr_req)
-{
-       struct langwell_dtd     *curr_dtd;
-       struct langwell_dqh     *curr_dqh;
-       int                     td_complete, actual, remaining_length;
-       int                     i, dir;
-       u8                      dtd_status = 0;
-       int                     retval = 0;
-
-       curr_dqh = &dev->ep_dqh[index];
-       dir = index % 2;
-
-       curr_dtd = curr_req->head;
-       td_complete = 0;
-       actual = curr_req->req.length;
-
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       for (i = 0; i < curr_req->dtd_count; i++) {
-
-               /* command execution states by dTD */
-               dtd_status = curr_dtd->dtd_status;
-
-               barrier();
-               remaining_length = le16_to_cpu(curr_dtd->dtd_total);
-               actual -= remaining_length;
-
-               if (!dtd_status) {
-                       /* transfers completed successfully */
-                       if (!remaining_length) {
-                               td_complete++;
-                               dev_vdbg(&dev->pdev->dev,
-                                       "dTD transmitted successfully\n");
-                       } else {
-                               if (dir) {
-                                       dev_vdbg(&dev->pdev->dev,
-                                               "TX dTD remains data\n");
-                                       retval = -EPROTO;
-                                       break;
-
-                               } else {
-                                       td_complete++;
-                                       break;
-                               }
-                       }
-               } else {
-                       /* transfers completed with errors */
-                       if (dtd_status & DTD_STS_ACTIVE) {
-                               dev_dbg(&dev->pdev->dev,
-                                       "dTD status ACTIVE dQH[%d]\n", index);
-                               retval = 1;
-                               return retval;
-                       } else if (dtd_status & DTD_STS_HALTED) {
-                               dev_err(&dev->pdev->dev,
-                                       "dTD error %08x dQH[%d]\n",
-                                       dtd_status, index);
-                               /* clear the errors and halt condition */
-                               curr_dqh->dtd_status = 0;
-                               retval = -EPIPE;
-                               break;
-                       } else if (dtd_status & DTD_STS_DBE) {
-                               dev_dbg(&dev->pdev->dev,
-                                       "data buffer (overflow) error\n");
-                               retval = -EPROTO;
-                               break;
-                       } else if (dtd_status & DTD_STS_TRE) {
-                               dev_dbg(&dev->pdev->dev,
-                                       "transaction(ISO) error\n");
-                               retval = -EILSEQ;
-                               break;
-                       } else
-                               dev_err(&dev->pdev->dev,
-                                       "unknown error (0x%x)!\n",
-                                       dtd_status);
-               }
-
-               if (i != curr_req->dtd_count - 1)
-                       curr_dtd = (struct langwell_dtd *)
-                               curr_dtd->next_dtd_virt;
-       }
-
-       if (retval)
-               return retval;
-
-       curr_req->req.actual = actual;
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return 0;
-}
-
-
-/* complete DATA or STATUS phase of ep0 prime status phase if needed */
-static void ep0_req_complete(struct langwell_udc *dev,
-               struct langwell_ep *ep0, struct langwell_request *req)
-{
-       u32     new_addr;
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       if (dev->usb_state == USB_STATE_ADDRESS) {
-               /* set the new address */
-               new_addr = (u32)dev->dev_addr;
-               writel(new_addr << USBADR_SHIFT, &dev->op_regs->deviceaddr);
-
-               new_addr = USBADR(readl(&dev->op_regs->deviceaddr));
-               dev_vdbg(&dev->pdev->dev, "new_addr = %d\n", new_addr);
-       }
-
-       done(ep0, req, 0);
-
-       switch (dev->ep0_state) {
-       case DATA_STATE_XMIT:
-               /* receive status phase */
-               if (prime_status_phase(dev, EP_DIR_OUT))
-                       ep0_stall(dev);
-               break;
-       case DATA_STATE_RECV:
-               /* send status phase */
-               if (prime_status_phase(dev, EP_DIR_IN))
-                       ep0_stall(dev);
-               break;
-       case WAIT_FOR_OUT_STATUS:
-               dev->ep0_state = WAIT_FOR_SETUP;
-               break;
-       case WAIT_FOR_SETUP:
-               dev_err(&dev->pdev->dev, "unexpect ep0 packets\n");
-               break;
-       default:
-               ep0_stall(dev);
-               break;
-       }
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* USB transfer completion interrupt */
-static void handle_trans_complete(struct langwell_udc *dev)
-{
-       u32                     complete_bits;
-       int                     i, ep_num, dir, bit_mask, status;
-       struct langwell_ep      *epn;
-       struct langwell_request *curr_req, *temp_req;
-
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       complete_bits = readl(&dev->op_regs->endptcomplete);
-       dev_vdbg(&dev->pdev->dev, "endptcomplete register: 0x%08x\n",
-                       complete_bits);
-
-       /* Write-Clear the bits in endptcomplete register */
-       writel(complete_bits, &dev->op_regs->endptcomplete);
-
-       if (!complete_bits) {
-               dev_dbg(&dev->pdev->dev, "complete_bits = 0\n");
-               goto done;
-       }
-
-       for (i = 0; i < dev->ep_max; i++) {
-               ep_num = i / 2;
-               dir = i % 2;
-
-               bit_mask = 1 << (ep_num + 16 * dir);
-
-               if (!(complete_bits & bit_mask))
-                       continue;
-
-               /* ep0 */
-               if (i == 1)
-                       epn = &dev->ep[0];
-               else
-                       epn = &dev->ep[i];
-
-               if (epn->name == NULL) {
-                       dev_warn(&dev->pdev->dev, "invalid endpoint\n");
-                       continue;
-               }
-
-               if (i < 2)
-                       /* ep0 in and out */
-                       dev_dbg(&dev->pdev->dev, "%s-%s transfer completed\n",
-                                       epn->name,
-                                       is_in(epn) ? "in" : "out");
-               else
-                       dev_dbg(&dev->pdev->dev, "%s transfer completed\n",
-                                       epn->name);
-
-               /* process the req queue until an uncomplete request */
-               list_for_each_entry_safe(curr_req, temp_req,
-                               &epn->queue, queue) {
-                       status = process_ep_req(dev, i, curr_req);
-                       dev_vdbg(&dev->pdev->dev, "%s req status: %d\n",
-                                       epn->name, status);
-
-                       if (status)
-                               break;
-
-                       /* write back status to req */
-                       curr_req->req.status = status;
-
-                       /* ep0 request completion */
-                       if (ep_num == 0) {
-                               ep0_req_complete(dev, epn, curr_req);
-                               break;
-                       } else {
-                               done(epn, curr_req, status);
-                       }
-               }
-       }
-done:
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-/* port change detect interrupt handler */
-static void handle_port_change(struct langwell_udc *dev)
-{
-       u32     portsc1, devlc;
-
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       if (dev->bus_reset)
-               dev->bus_reset = 0;
-
-       portsc1 = readl(&dev->op_regs->portsc1);
-       devlc = readl(&dev->op_regs->devlc);
-       dev_vdbg(&dev->pdev->dev, "portsc1 = 0x%08x, devlc = 0x%08x\n",
-                       portsc1, devlc);
-
-       /* bus reset is finished */
-       if (!(portsc1 & PORTS_PR)) {
-               /* get the speed */
-               dev->gadget.speed = lpm_device_speed(devlc);
-               dev_vdbg(&dev->pdev->dev, "dev->gadget.speed = %d\n",
-                       dev->gadget.speed);
-       }
-
-       /* LPM L0 to L1 */
-       if (dev->lpm && dev->lpm_state == LPM_L0)
-               if (portsc1 & PORTS_SUSP && portsc1 & PORTS_SLP) {
-                       dev_info(&dev->pdev->dev, "LPM L0 to L1\n");
-                       dev->lpm_state = LPM_L1;
-               }
-
-       /* LPM L1 to L0, force resume or remote wakeup finished */
-       if (dev->lpm && dev->lpm_state == LPM_L1)
-               if (!(portsc1 & PORTS_SUSP)) {
-                       dev_info(&dev->pdev->dev, "LPM L1 to L0\n");
-                       dev->lpm_state = LPM_L0;
-               }
-
-       /* update USB state */
-       if (!dev->resume_state)
-               dev->usb_state = USB_STATE_DEFAULT;
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* USB reset interrupt handler */
-static void handle_usb_reset(struct langwell_udc *dev)
-{
-       u32             deviceaddr,
-                       endptsetupstat,
-                       endptcomplete;
-       unsigned long   timeout;
-
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       /* Write-Clear the device address */
-       deviceaddr = readl(&dev->op_regs->deviceaddr);
-       writel(deviceaddr & ~USBADR_MASK, &dev->op_regs->deviceaddr);
-
-       dev->dev_addr = 0;
-
-       /* clear usb state */
-       dev->resume_state = 0;
-
-       /* LPM L1 to L0, reset */
-       if (dev->lpm)
-               dev->lpm_state = LPM_L0;
-
-       dev->ep0_dir = USB_DIR_OUT;
-       dev->ep0_state = WAIT_FOR_SETUP;
-
-       /* remote wakeup reset to 0 when the device is reset */
-       dev->remote_wakeup = 0;
-       dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
-       dev->gadget.b_hnp_enable = 0;
-       dev->gadget.a_hnp_support = 0;
-       dev->gadget.a_alt_hnp_support = 0;
-
-       /* Write-Clear all the setup token semaphores */
-       endptsetupstat = readl(&dev->op_regs->endptsetupstat);
-       writel(endptsetupstat, &dev->op_regs->endptsetupstat);
-
-       /* Write-Clear all the endpoint complete status bits */
-       endptcomplete = readl(&dev->op_regs->endptcomplete);
-       writel(endptcomplete, &dev->op_regs->endptcomplete);
-
-       /* wait until all endptprime bits cleared */
-       timeout = jiffies + PRIME_TIMEOUT;
-       while (readl(&dev->op_regs->endptprime)) {
-               if (time_after(jiffies, timeout)) {
-                       dev_err(&dev->pdev->dev, "USB reset timeout\n");
-                       break;
-               }
-               cpu_relax();
-       }
-
-       /* write 1s to endptflush register to clear any primed buffers */
-       writel((u32) ~0, &dev->op_regs->endptflush);
-
-       if (readl(&dev->op_regs->portsc1) & PORTS_PR) {
-               dev_vdbg(&dev->pdev->dev, "USB bus reset\n");
-               /* bus is reseting */
-               dev->bus_reset = 1;
-
-               /* reset all the queues, stop all USB activities */
-               stop_activity(dev);
-               dev->usb_state = USB_STATE_DEFAULT;
-       } else {
-               dev_vdbg(&dev->pdev->dev, "device controller reset\n");
-               /* controller reset */
-               langwell_udc_reset(dev);
-
-               /* reset all the queues, stop all USB activities */
-               stop_activity(dev);
-
-               /* reset ep0 dQH and endptctrl */
-               ep0_reset(dev);
-
-               /* enable interrupt and set controller to run state */
-               langwell_udc_start(dev);
-
-               dev->usb_state = USB_STATE_ATTACHED;
-       }
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* USB bus suspend/resume interrupt */
-static void handle_bus_suspend(struct langwell_udc *dev)
-{
-       dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       dev->resume_state = dev->usb_state;
-       dev->usb_state = USB_STATE_SUSPENDED;
-
-       /* report suspend to the driver */
-       if (dev->driver) {
-               if (dev->driver->suspend) {
-                       spin_unlock(&dev->lock);
-                       dev->driver->suspend(&dev->gadget);
-                       spin_lock(&dev->lock);
-                       dev_dbg(&dev->pdev->dev, "suspend %s\n",
-                                       dev->driver->driver.name);
-               }
-       }
-
-       /* enter PHY low power suspend */
-       if (dev->pdev->device != 0x0829)
-               langwell_phy_low_power(dev, 0);
-
-       dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-static void handle_bus_resume(struct langwell_udc *dev)
-{
-       dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       dev->usb_state = dev->resume_state;
-       dev->resume_state = 0;
-
-       /* exit PHY low power suspend */
-       if (dev->pdev->device != 0x0829)
-               langwell_phy_low_power(dev, 0);
-
-       /* report resume to the driver */
-       if (dev->driver) {
-               if (dev->driver->resume) {
-                       spin_unlock(&dev->lock);
-                       dev->driver->resume(&dev->gadget);
-                       spin_lock(&dev->lock);
-                       dev_dbg(&dev->pdev->dev, "resume %s\n",
-                                       dev->driver->driver.name);
-               }
-       }
-
-       dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* USB device controller interrupt handler */
-static irqreturn_t langwell_irq(int irq, void *_dev)
-{
-       struct langwell_udc     *dev = _dev;
-       u32                     usbsts,
-                               usbintr,
-                               irq_sts,
-                               portsc1;
-
-       dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       if (dev->stopped) {
-               dev_vdbg(&dev->pdev->dev, "handle IRQ_NONE\n");
-               dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-               return IRQ_NONE;
-       }
-
-       spin_lock(&dev->lock);
-
-       /* USB status */
-       usbsts = readl(&dev->op_regs->usbsts);
-
-       /* USB interrupt enable */
-       usbintr = readl(&dev->op_regs->usbintr);
-
-       irq_sts = usbsts & usbintr;
-       dev_vdbg(&dev->pdev->dev,
-                       "usbsts = 0x%08x, usbintr = 0x%08x, irq_sts = 0x%08x\n",
-                       usbsts, usbintr, irq_sts);
-
-       if (!irq_sts) {
-               dev_vdbg(&dev->pdev->dev, "handle IRQ_NONE\n");
-               dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-               spin_unlock(&dev->lock);
-               return IRQ_NONE;
-       }
-
-       /* Write-Clear interrupt status bits */
-       writel(irq_sts, &dev->op_regs->usbsts);
-
-       /* resume from suspend */
-       portsc1 = readl(&dev->op_regs->portsc1);
-       if (dev->usb_state == USB_STATE_SUSPENDED)
-               if (!(portsc1 & PORTS_SUSP))
-                       handle_bus_resume(dev);
-
-       /* USB interrupt */
-       if (irq_sts & STS_UI) {
-               dev_vdbg(&dev->pdev->dev, "USB interrupt\n");
-
-               /* setup packet received from ep0 */
-               if (readl(&dev->op_regs->endptsetupstat)
-                               & EP0SETUPSTAT_MASK) {
-                       dev_vdbg(&dev->pdev->dev,
-                               "USB SETUP packet received interrupt\n");
-                       /* setup tripwire semaphone */
-                       setup_tripwire(dev);
-                       handle_setup_packet(dev, &dev->local_setup_buff);
-               }
-
-               /* USB transfer completion */
-               if (readl(&dev->op_regs->endptcomplete)) {
-                       dev_vdbg(&dev->pdev->dev,
-                               "USB transfer completion interrupt\n");
-                       handle_trans_complete(dev);
-               }
-       }
-
-       /* SOF received interrupt (for ISO transfer) */
-       if (irq_sts & STS_SRI) {
-               /* FIXME */
-               /* dev_vdbg(&dev->pdev->dev, "SOF received interrupt\n"); */
-       }
-
-       /* port change detect interrupt */
-       if (irq_sts & STS_PCI) {
-               dev_vdbg(&dev->pdev->dev, "port change detect interrupt\n");
-               handle_port_change(dev);
-       }
-
-       /* suspend interrupt */
-       if (irq_sts & STS_SLI) {
-               dev_vdbg(&dev->pdev->dev, "suspend interrupt\n");
-               handle_bus_suspend(dev);
-       }
-
-       /* USB reset interrupt */
-       if (irq_sts & STS_URI) {
-               dev_vdbg(&dev->pdev->dev, "USB reset interrupt\n");
-               handle_usb_reset(dev);
-       }
-
-       /* USB error or system error interrupt */
-       if (irq_sts & (STS_UEI | STS_SEI)) {
-               /* FIXME */
-               dev_warn(&dev->pdev->dev, "error IRQ, irq_sts: %x\n", irq_sts);
-       }
-
-       spin_unlock(&dev->lock);
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return IRQ_HANDLED;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* release device structure */
-static void gadget_release(struct device *_dev)
-{
-       struct langwell_udc     *dev = dev_get_drvdata(_dev);
-
-       dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       complete(dev->done);
-
-       dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       kfree(dev);
-}
-
-
-/* enable SRAM caching if SRAM detected */
-static void sram_init(struct langwell_udc *dev)
-{
-       struct pci_dev          *pdev = dev->pdev;
-
-       dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       dev->sram_addr = pci_resource_start(pdev, 1);
-       dev->sram_size = pci_resource_len(pdev, 1);
-       dev_info(&dev->pdev->dev, "Found private SRAM at %x size:%x\n",
-                       dev->sram_addr, dev->sram_size);
-       dev->got_sram = 1;
-
-       if (pci_request_region(pdev, 1, kobject_name(&pdev->dev.kobj))) {
-               dev_warn(&dev->pdev->dev, "SRAM request failed\n");
-               dev->got_sram = 0;
-       } else if (!dma_declare_coherent_memory(&pdev->dev, dev->sram_addr,
-                       dev->sram_addr, dev->sram_size, DMA_MEMORY_MAP)) {
-               dev_warn(&dev->pdev->dev, "SRAM DMA declare failed\n");
-               pci_release_region(pdev, 1);
-               dev->got_sram = 0;
-       }
-
-       dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* release SRAM caching */
-static void sram_deinit(struct langwell_udc *dev)
-{
-       struct pci_dev *pdev = dev->pdev;
-
-       dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       dma_release_declared_memory(&pdev->dev);
-       pci_release_region(pdev, 1);
-
-       dev->got_sram = 0;
-
-       dev_info(&dev->pdev->dev, "release SRAM caching\n");
-       dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* tear down the binding between this driver and the pci device */
-static void langwell_udc_remove(struct pci_dev *pdev)
-{
-       struct langwell_udc     *dev = pci_get_drvdata(pdev);
-
-       DECLARE_COMPLETION(done);
-
-       BUG_ON(dev->driver);
-       dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       dev->done = &done;
-
-       /* free dTD dma_pool and dQH */
-       if (dev->dtd_pool)
-               dma_pool_destroy(dev->dtd_pool);
-
-       if (dev->ep_dqh)
-               dma_free_coherent(&pdev->dev, dev->ep_dqh_size,
-                       dev->ep_dqh, dev->ep_dqh_dma);
-
-       /* release SRAM caching */
-       if (dev->has_sram && dev->got_sram)
-               sram_deinit(dev);
-
-       if (dev->status_req) {
-               kfree(dev->status_req->req.buf);
-               kfree(dev->status_req);
-       }
-
-       kfree(dev->ep);
-
-       /* disable IRQ handler */
-       if (dev->got_irq)
-               free_irq(pdev->irq, dev);
-
-       if (dev->cap_regs)
-               iounmap(dev->cap_regs);
-
-       if (dev->region)
-               release_mem_region(pci_resource_start(pdev, 0),
-                               pci_resource_len(pdev, 0));
-
-       if (dev->enabled)
-               pci_disable_device(pdev);
-
-       dev->cap_regs = NULL;
-
-       dev_info(&dev->pdev->dev, "unbind\n");
-       dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
-       device_unregister(&dev->gadget.dev);
-       device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
-       device_remove_file(&pdev->dev, &dev_attr_remote_wakeup);
-
-       pci_set_drvdata(pdev, NULL);
-
-       /* free dev, wait for the release() finished */
-       wait_for_completion(&done);
-}
-
-
-/*
- * wrap this driver around the specified device, but
- * don't respond over USB until a gadget driver binds to us.
- */
-static int langwell_udc_probe(struct pci_dev *pdev,
-               const struct pci_device_id *id)
-{
-       struct langwell_udc     *dev;
-       unsigned long           resource, len;
-       void                    __iomem *base = NULL;
-       size_t                  size;
-       int                     retval;
-
-       /* alloc, and start init */
-       dev = kzalloc(sizeof *dev, GFP_KERNEL);
-       if (dev == NULL) {
-               retval = -ENOMEM;
-               goto error;
-       }
-
-       /* initialize device spinlock */
-       spin_lock_init(&dev->lock);
-
-       dev->pdev = pdev;
-       dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       pci_set_drvdata(pdev, dev);
-
-       /* now all the pci goodies ... */
-       if (pci_enable_device(pdev) < 0) {
-               retval = -ENODEV;
-               goto error;
-       }
-       dev->enabled = 1;
-
-       /* control register: BAR 0 */
-       resource = pci_resource_start(pdev, 0);
-       len = pci_resource_len(pdev, 0);
-       if (!request_mem_region(resource, len, driver_name)) {
-               dev_err(&dev->pdev->dev, "controller already in use\n");
-               retval = -EBUSY;
-               goto error;
-       }
-       dev->region = 1;
-
-       base = ioremap_nocache(resource, len);
-       if (base == NULL) {
-               dev_err(&dev->pdev->dev, "can't map memory\n");
-               retval = -EFAULT;
-               goto error;
-       }
-
-       dev->cap_regs = (struct langwell_cap_regs __iomem *) base;
-       dev_vdbg(&dev->pdev->dev, "dev->cap_regs: %p\n", dev->cap_regs);
-       dev->op_regs = (struct langwell_op_regs __iomem *)
-               (base + OP_REG_OFFSET);
-       dev_vdbg(&dev->pdev->dev, "dev->op_regs: %p\n", dev->op_regs);
-
-       /* irq setup after old hardware is cleaned up */
-       if (!pdev->irq) {
-               dev_err(&dev->pdev->dev, "No IRQ. Check PCI setup!\n");
-               retval = -ENODEV;
-               goto error;
-       }
-
-       dev->has_sram = 1;
-       dev->got_sram = 0;
-       dev_vdbg(&dev->pdev->dev, "dev->has_sram: %d\n", dev->has_sram);
-
-       /* enable SRAM caching if detected */
-       if (dev->has_sram && !dev->got_sram)
-               sram_init(dev);
-
-       dev_info(&dev->pdev->dev,
-                       "irq %d, io mem: 0x%08lx, len: 0x%08lx, pci mem 0x%p\n",
-                       pdev->irq, resource, len, base);
-       /* enables bus-mastering for device dev */
-       pci_set_master(pdev);
-
-       if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED,
-                               driver_name, dev) != 0) {
-               dev_err(&dev->pdev->dev,
-                               "request interrupt %d failed\n", pdev->irq);
-               retval = -EBUSY;
-               goto error;
-       }
-       dev->got_irq = 1;
-
-       /* set stopped bit */
-       dev->stopped = 1;
-
-       /* capabilities and endpoint number */
-       dev->lpm = (readl(&dev->cap_regs->hccparams) & HCC_LEN) ? 1 : 0;
-       dev->dciversion = readw(&dev->cap_regs->dciversion);
-       dev->devcap = (readl(&dev->cap_regs->dccparams) & DEVCAP) ? 1 : 0;
-       dev_vdbg(&dev->pdev->dev, "dev->lpm: %d\n", dev->lpm);
-       dev_vdbg(&dev->pdev->dev, "dev->dciversion: 0x%04x\n",
-                       dev->dciversion);
-       dev_vdbg(&dev->pdev->dev, "dccparams: 0x%08x\n",
-                       readl(&dev->cap_regs->dccparams));
-       dev_vdbg(&dev->pdev->dev, "dev->devcap: %d\n", dev->devcap);
-       if (!dev->devcap) {
-               dev_err(&dev->pdev->dev, "can't support device mode\n");
-               retval = -ENODEV;
-               goto error;
-       }
-
-       /* a pair of endpoints (out/in) for each address */
-       dev->ep_max = DEN(readl(&dev->cap_regs->dccparams)) * 2;
-       dev_vdbg(&dev->pdev->dev, "dev->ep_max: %d\n", dev->ep_max);
-
-       /* allocate endpoints memory */
-       dev->ep = kzalloc(sizeof(struct langwell_ep) * dev->ep_max,
-                       GFP_KERNEL);
-       if (!dev->ep) {
-               dev_err(&dev->pdev->dev, "allocate endpoints memory failed\n");
-               retval = -ENOMEM;
-               goto error;
-       }
-
-       /* allocate device dQH memory */
-       size = dev->ep_max * sizeof(struct langwell_dqh);
-       dev_vdbg(&dev->pdev->dev, "orig size = %zd\n", size);
-       if (size < DQH_ALIGNMENT)
-               size = DQH_ALIGNMENT;
-       else if ((size % DQH_ALIGNMENT) != 0) {
-               size += DQH_ALIGNMENT + 1;
-               size &= ~(DQH_ALIGNMENT - 1);
-       }
-       dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
-                                       &dev->ep_dqh_dma, GFP_KERNEL);
-       if (!dev->ep_dqh) {
-               dev_err(&dev->pdev->dev, "allocate dQH memory failed\n");
-               retval = -ENOMEM;
-               goto error;
-       }
-       dev->ep_dqh_size = size;
-       dev_vdbg(&dev->pdev->dev, "ep_dqh_size = %zd\n", dev->ep_dqh_size);
-
-       /* initialize ep0 status request structure */
-       dev->status_req = kzalloc(sizeof(struct langwell_request), GFP_KERNEL);
-       if (!dev->status_req) {
-               dev_err(&dev->pdev->dev,
-                               "allocate status_req memory failed\n");
-               retval = -ENOMEM;
-               goto error;
-       }
-       INIT_LIST_HEAD(&dev->status_req->queue);
-
-       /* allocate a small amount of memory to get valid address */
-       dev->status_req->req.buf = kmalloc(8, GFP_KERNEL);
-       dev->status_req->req.dma = virt_to_phys(dev->status_req->req.buf);
-
-       dev->resume_state = USB_STATE_NOTATTACHED;
-       dev->usb_state = USB_STATE_POWERED;
-       dev->ep0_dir = USB_DIR_OUT;
-
-       /* remote wakeup reset to 0 when the device is reset */
-       dev->remote_wakeup = 0;
-       dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
-
-       /* reset device controller */
-       langwell_udc_reset(dev);
-
-       /* initialize gadget structure */
-       dev->gadget.ops = &langwell_ops;        /* usb_gadget_ops */
-       dev->gadget.ep0 = &dev->ep[0].ep;       /* gadget ep0 */
-       INIT_LIST_HEAD(&dev->gadget.ep_list);   /* ep_list */
-       dev->gadget.speed = USB_SPEED_UNKNOWN;  /* speed */
-       dev->gadget.max_speed = USB_SPEED_HIGH; /* support dual speed */
-
-       /* the "gadget" abstracts/virtualizes the controller */
-       dev_set_name(&dev->gadget.dev, "gadget");
-       dev->gadget.dev.parent = &pdev->dev;
-       dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
-       dev->gadget.dev.release = gadget_release;
-       dev->gadget.name = driver_name;         /* gadget name */
-
-       /* controller endpoints reinit */
-       eps_reinit(dev);
-
-       /* reset ep0 dQH and endptctrl */
-       ep0_reset(dev);
-
-       /* create dTD dma_pool resource */
-       dev->dtd_pool = dma_pool_create("langwell_dtd",
-                       &dev->pdev->dev,
-                       sizeof(struct langwell_dtd),
-                       DTD_ALIGNMENT,
-                       DMA_BOUNDARY);
-
-       if (!dev->dtd_pool) {
-               retval = -ENOMEM;
-               goto error;
-       }
-
-       /* done */
-       dev_info(&dev->pdev->dev, "%s\n", driver_desc);
-       dev_info(&dev->pdev->dev, "irq %d, pci mem %p\n", pdev->irq, base);
-       dev_info(&dev->pdev->dev, "Driver version: " DRIVER_VERSION "\n");
-       dev_info(&dev->pdev->dev, "Support (max) %d endpoints\n", dev->ep_max);
-       dev_info(&dev->pdev->dev, "Device interface version: 0x%04x\n",
-                       dev->dciversion);
-       dev_info(&dev->pdev->dev, "Controller mode: %s\n",
-                       dev->devcap ? "Device" : "Host");
-       dev_info(&dev->pdev->dev, "Support USB LPM: %s\n",
-                       dev->lpm ? "Yes" : "No");
-
-       dev_vdbg(&dev->pdev->dev,
-                       "After langwell_udc_probe(), print all registers:\n");
-       print_all_registers(dev);
-
-       retval = device_register(&dev->gadget.dev);
-       if (retval)
-               goto error;
-
-       retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
-       if (retval)
-               goto error;
-
-       retval = device_create_file(&pdev->dev, &dev_attr_langwell_udc);
-       if (retval)
-               goto error;
-
-       retval = device_create_file(&pdev->dev, &dev_attr_remote_wakeup);
-       if (retval)
-               goto error_attr1;
-
-       dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return 0;
-
-error_attr1:
-       device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
-error:
-       if (dev) {
-               dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-               langwell_udc_remove(pdev);
-       }
-
-       return retval;
-}
-
-
-/* device controller suspend */
-static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-       struct langwell_udc     *dev = pci_get_drvdata(pdev);
-
-       dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       usb_del_gadget_udc(&dev->gadget);
-       /* disable interrupt and set controller to stop state */
-       langwell_udc_stop(dev);
-
-       /* disable IRQ handler */
-       if (dev->got_irq)
-               free_irq(pdev->irq, dev);
-       dev->got_irq = 0;
-
-       /* save PCI state */
-       pci_save_state(pdev);
-
-       spin_lock_irq(&dev->lock);
-       /* stop all usb activities */
-       stop_activity(dev);
-       spin_unlock_irq(&dev->lock);
-
-       /* free dTD dma_pool and dQH */
-       if (dev->dtd_pool)
-               dma_pool_destroy(dev->dtd_pool);
-
-       if (dev->ep_dqh)
-               dma_free_coherent(&pdev->dev, dev->ep_dqh_size,
-                       dev->ep_dqh, dev->ep_dqh_dma);
-
-       /* release SRAM caching */
-       if (dev->has_sram && dev->got_sram)
-               sram_deinit(dev);
-
-       /* set device power state */
-       pci_set_power_state(pdev, PCI_D3hot);
-
-       /* enter PHY low power suspend */
-       if (dev->pdev->device != 0x0829)
-               langwell_phy_low_power(dev, 1);
-
-       dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return 0;
-}
-
-
-/* device controller resume */
-static int langwell_udc_resume(struct pci_dev *pdev)
-{
-       struct langwell_udc     *dev = pci_get_drvdata(pdev);
-       size_t                  size;
-
-       dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       /* exit PHY low power suspend */
-       if (dev->pdev->device != 0x0829)
-               langwell_phy_low_power(dev, 0);
-
-       /* set device D0 power state */
-       pci_set_power_state(pdev, PCI_D0);
-
-       /* enable SRAM caching if detected */
-       if (dev->has_sram && !dev->got_sram)
-               sram_init(dev);
-
-       /* allocate device dQH memory */
-       size = dev->ep_max * sizeof(struct langwell_dqh);
-       dev_vdbg(&dev->pdev->dev, "orig size = %zd\n", size);
-       if (size < DQH_ALIGNMENT)
-               size = DQH_ALIGNMENT;
-       else if ((size % DQH_ALIGNMENT) != 0) {
-               size += DQH_ALIGNMENT + 1;
-               size &= ~(DQH_ALIGNMENT - 1);
-       }
-       dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
-                                       &dev->ep_dqh_dma, GFP_KERNEL);
-       if (!dev->ep_dqh) {
-               dev_err(&dev->pdev->dev, "allocate dQH memory failed\n");
-               return -ENOMEM;
-       }
-       dev->ep_dqh_size = size;
-       dev_vdbg(&dev->pdev->dev, "ep_dqh_size = %zd\n", dev->ep_dqh_size);
-
-       /* create dTD dma_pool resource */
-       dev->dtd_pool = dma_pool_create("langwell_dtd",
-                       &dev->pdev->dev,
-                       sizeof(struct langwell_dtd),
-                       DTD_ALIGNMENT,
-                       DMA_BOUNDARY);
-
-       if (!dev->dtd_pool)
-               return -ENOMEM;
-
-       /* restore PCI state */
-       pci_restore_state(pdev);
-
-       /* enable IRQ handler */
-       if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED,
-                               driver_name, dev) != 0) {
-               dev_err(&dev->pdev->dev, "request interrupt %d failed\n",
-                               pdev->irq);
-               return -EBUSY;
-       }
-       dev->got_irq = 1;
-
-       /* reset and start controller to run state */
-       if (dev->stopped) {
-               /* reset device controller */
-               langwell_udc_reset(dev);
-
-               /* reset ep0 dQH and endptctrl */
-               ep0_reset(dev);
-
-               /* start device if gadget is loaded */
-               if (dev->driver)
-                       langwell_udc_start(dev);
-       }
-
-       /* reset USB status */
-       dev->usb_state = USB_STATE_ATTACHED;
-       dev->ep0_state = WAIT_FOR_SETUP;
-       dev->ep0_dir = USB_DIR_OUT;
-
-       dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-       return 0;
-}
-
-
-/* pci driver shutdown */
-static void langwell_udc_shutdown(struct pci_dev *pdev)
-{
-       struct langwell_udc     *dev = pci_get_drvdata(pdev);
-       u32                     usbmode;
-
-       dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-       /* reset controller mode to IDLE */
-       usbmode = readl(&dev->op_regs->usbmode);
-       dev_dbg(&dev->pdev->dev, "usbmode = 0x%08x\n", usbmode);
-       usbmode &= (~3 | MODE_IDLE);
-       writel(usbmode, &dev->op_regs->usbmode);
-
-       dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static const struct pci_device_id pci_ids[] = { {
-       .class =        ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
-       .class_mask =   ~0,
-       .vendor =       0x8086,
-       .device =       0x0811,
-       .subvendor =    PCI_ANY_ID,
-       .subdevice =    PCI_ANY_ID,
-}, { /* end: all zeroes */ }
-};
-
-MODULE_DEVICE_TABLE(pci, pci_ids);
-
-
-static struct pci_driver langwell_pci_driver = {
-       .name =         (char *) driver_name,
-       .id_table =     pci_ids,
-
-       .probe =        langwell_udc_probe,
-       .remove =       langwell_udc_remove,
-
-       /* device controller suspend/resume */
-       .suspend =      langwell_udc_suspend,
-       .resume =       langwell_udc_resume,
-
-       .shutdown =     langwell_udc_shutdown,
-};
-
-module_pci_driver(langwell_pci_driver);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Xiaochen Shen <xiaochen.shen@intel.com>");
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h
deleted file mode 100644 (file)
index 38fa3c8..0000000
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * Intel Langwell USB Device Controller driver
- * Copyright (C) 2008-2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- */
-
-#include <linux/usb/langwell_udc.h>
-
-/*-------------------------------------------------------------------------*/
-
-/* driver data structures and utilities */
-
-/*
- * dTD: Device Endpoint Transfer Descriptor
- * describe to the device controller the location and quantity of
- * data to be send/received for given transfer
- */
-struct langwell_dtd {
-       u32     dtd_next;
-/* bits 31:5, next transfer element pointer */
-#define        DTD_NEXT(d)     (((d)>>5)&0x7ffffff)
-#define        DTD_NEXT_MASK   (0x7ffffff << 5)
-/* terminate */
-#define        DTD_TERM        BIT(0)
-       /* bits 7:0, execution back states */
-       u32     dtd_status:8;
-#define        DTD_STATUS(d)   (((d)>>0)&0xff)
-#define        DTD_STS_ACTIVE  BIT(7)  /* active */
-#define        DTD_STS_HALTED  BIT(6)  /* halted */
-#define        DTD_STS_DBE     BIT(5)  /* data buffer error */
-#define        DTD_STS_TRE     BIT(3)  /* transaction error  */
-       /* bits 9:8 */
-       u32     dtd_res0:2;
-       /* bits 11:10, multipier override */
-       u32     dtd_multo:2;
-#define        DTD_MULTO       (BIT(11) | BIT(10))
-       /* bits 14:12 */
-       u32     dtd_res1:3;
-       /* bit 15, interrupt on complete */
-       u32     dtd_ioc:1;
-#define        DTD_IOC         BIT(15)
-       /* bits 30:16, total bytes */
-       u32     dtd_total:15;
-#define        DTD_TOTAL(d)    (((d)>>16)&0x7fff)
-#define        DTD_MAX_TRANSFER_LENGTH 0x4000
-       /* bit 31 */
-       u32     dtd_res2:1;
-       /* dTD buffer pointer page 0 to 4 */
-       u32     dtd_buf[5];
-#define        DTD_OFFSET_MASK 0xfff
-/* bits 31:12, buffer pointer */
-#define        DTD_BUFFER(d)   (((d)>>12)&0x3ff)
-/* bits 11:0, current offset */
-#define        DTD_C_OFFSET(d) (((d)>>0)&0xfff)
-/* bits 10:0, frame number */
-#define        DTD_FRAME(d)    (((d)>>0)&0x7ff)
-
-       /* driver-private parts */
-
-       /* dtd dma address */
-       dma_addr_t              dtd_dma;
-       /* next dtd virtual address */
-       struct langwell_dtd     *next_dtd_virt;
-};
-
-
-/*
- * dQH: Device Endpoint Queue Head
- * describe where all transfers are managed
- * 48-byte data structure, aligned on 64-byte boundary
- *
- * These are associated with dTD structure
- */
-struct langwell_dqh {
-       /* endpoint capabilities and characteristics */
-       u32     dqh_res0:15;    /* bits 14:0 */
-       u32     dqh_ios:1;      /* bit 15, interrupt on setup */
-#define        DQH_IOS         BIT(15)
-       u32     dqh_mpl:11;     /* bits 26:16, maximum packet length */
-#define        DQH_MPL         (0x7ff << 16)
-       u32     dqh_res1:2;     /* bits 28:27 */
-       u32     dqh_zlt:1;      /* bit 29, zero length termination */
-#define        DQH_ZLT         BIT(29)
-       u32     dqh_mult:2;     /* bits 31:30 */
-#define        DQH_MULT        (BIT(30) | BIT(31))
-
-       /* current dTD pointer */
-       u32     dqh_current;    /* locate the transfer in progress */
-#define DQH_C_DTD(e)   \
-       (((e)>>5)&0x7ffffff)    /* bits 31:5, current dTD pointer */
-
-       /* transfer overlay, hardware parts of a struct langwell_dtd */
-       u32     dtd_next;
-       u32     dtd_status:8;   /* bits 7:0, execution back states */
-       u32     dtd_res0:2;     /* bits 9:8 */
-       u32     dtd_multo:2;    /* bits 11:10, multipier override */
-       u32     dtd_res1:3;     /* bits 14:12 */
-       u32     dtd_ioc:1;      /* bit 15, interrupt on complete */
-       u32     dtd_total:15;   /* bits 30:16, total bytes */
-       u32     dtd_res2:1;     /* bit 31 */
-       u32     dtd_buf[5];     /* dTD buffer pointer page 0 to 4 */
-
-       u32     dqh_res2;
-       struct usb_ctrlrequest  dqh_setup;      /* setup packet buffer */
-} __attribute__ ((aligned(64)));
-
-
-/* endpoint data structure */
-struct langwell_ep {
-       struct usb_ep           ep;
-       dma_addr_t              dma;
-       struct langwell_udc     *dev;
-       unsigned long           irqs;
-       struct list_head        queue;
-       struct langwell_dqh     *dqh;
-       char                    name[14];
-       unsigned                stopped:1,
-                               ep_type:2,
-                               ep_num:8;
-};
-
-
-/* request data structure */
-struct langwell_request {
-       struct usb_request      req;
-       struct langwell_dtd     *dtd, *head, *tail;
-       struct langwell_ep      *ep;
-       dma_addr_t              dtd_dma;
-       struct list_head        queue;
-       unsigned                dtd_count;
-       unsigned                mapped:1;
-};
-
-
-/* ep0 transfer state */
-enum ep0_state {
-       WAIT_FOR_SETUP,
-       DATA_STATE_XMIT,
-       DATA_STATE_NEED_ZLP,
-       WAIT_FOR_OUT_STATUS,
-       DATA_STATE_RECV,
-};
-
-
-/* device suspend state */
-enum lpm_state {
-       LPM_L0, /* on */
-       LPM_L1, /* LPM L1 sleep */
-       LPM_L2, /* suspend */
-       LPM_L3, /* off */
-};
-
-
-/* device data structure */
-struct langwell_udc {
-       /* each pci device provides one gadget, several endpoints */
-       struct usb_gadget       gadget;
-       spinlock_t              lock;   /* device lock */
-       struct langwell_ep      *ep;
-       struct usb_gadget_driver        *driver;
-       struct usb_phy          *transceiver;
-       u8                      dev_addr;
-       u32                     usb_state;
-       u32                     resume_state;
-       u32                     bus_reset;
-       enum lpm_state          lpm_state;
-       enum ep0_state          ep0_state;
-       u32                     ep0_dir;
-       u16                     dciversion;
-       unsigned                ep_max;
-       unsigned                devcap:1,
-                               enabled:1,
-                               region:1,
-                               got_irq:1,
-                               powered:1,
-                               remote_wakeup:1,
-                               rate:1,
-                               is_reset:1,
-                               softconnected:1,
-                               vbus_active:1,
-                               suspended:1,
-                               stopped:1,
-                               lpm:1,          /* LPM capability */
-                               has_sram:1,     /* SRAM caching */
-                               got_sram:1;
-
-       /* pci state used to access those endpoints */
-       struct pci_dev          *pdev;
-
-       /* Langwell otg transceiver */
-       struct langwell_otg     *lotg;
-
-       /* control registers */
-       struct langwell_cap_regs        __iomem *cap_regs;
-       struct langwell_op_regs         __iomem *op_regs;
-
-       struct usb_ctrlrequest  local_setup_buff;
-       struct langwell_dqh     *ep_dqh;
-       size_t                  ep_dqh_size;
-       dma_addr_t              ep_dqh_dma;
-
-       /* ep0 status request */
-       struct langwell_request *status_req;
-
-       /* dma pool */
-       struct dma_pool         *dtd_pool;
-
-       /* make sure release() is done */
-       struct completion       *done;
-
-       /* for private SRAM caching */
-       unsigned int            sram_addr;
-       unsigned int            sram_size;
-
-       /* device status data for get_status request */
-       u16                     dev_status;
-};
-
-#define gadget_to_langwell(g)  container_of((g), struct langwell_udc, gadget)
-
diff --git a/include/linux/usb/langwell_udc.h b/include/linux/usb/langwell_udc.h
deleted file mode 100644 (file)
index 2d2d1bb..0000000
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Intel Langwell USB Device Controller driver
- * Copyright (C) 2008-2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef __LANGWELL_UDC_H
-#define __LANGWELL_UDC_H
-
-
-/* MACRO defines */
-#define        CAP_REG_OFFSET          0x0
-#define        OP_REG_OFFSET           0x28
-
-#define        DMA_ADDR_INVALID        (~(dma_addr_t)0)
-
-#define        DQH_ALIGNMENT           2048
-#define        DTD_ALIGNMENT           64
-#define        DMA_BOUNDARY            4096
-
-#define        EP0_MAX_PKT_SIZE        64
-#define EP_DIR_IN              1
-#define EP_DIR_OUT             0
-
-#define FLUSH_TIMEOUT          1000
-#define RESET_TIMEOUT          1000
-#define SETUPSTAT_TIMEOUT      100
-#define PRIME_TIMEOUT          100
-
-
-/* device memory space registers */
-
-/* Capability Registers, BAR0 + CAP_REG_OFFSET */
-struct langwell_cap_regs {
-       /* offset: 0x0 */
-       u8      caplength;      /* offset of Operational Register */
-       u8      _reserved3;
-       u16     hciversion;     /* H: BCD encoding of host version */
-       u32     hcsparams;      /* H: host port steering logic capability */
-       u32     hccparams;      /* H: host multiple mode control capability */
-#define        HCC_LEN BIT(17)         /* Link power management (LPM) capability */
-       u8      _reserved4[0x20-0xc];
-       /* offset: 0x20 */
-       u16     dciversion;     /* BCD encoding of device version */
-       u8      _reserved5[0x24-0x22];
-       u32     dccparams;      /* overall device controller capability */
-#define        HOSTCAP BIT(8)          /* host capable */
-#define        DEVCAP  BIT(7)          /* device capable */
-#define DEN(d) \
-       (((d)>>0)&0x1f)         /* bits 4:0, device endpoint number */
-} __attribute__ ((packed));
-
-
-/* Operational Registers, BAR0 + OP_REG_OFFSET */
-struct langwell_op_regs {
-       /* offset: 0x28 */
-       u32     extsts;
-#define        EXTS_TI1        BIT(4)  /* general purpose timer interrupt 1 */
-#define        EXTS_TI1TI0     BIT(3)  /* general purpose timer interrupt 0 */
-#define        EXTS_TI1UPI     BIT(2)  /* USB host periodic interrupt */
-#define        EXTS_TI1UAI     BIT(1)  /* USB host asynchronous interrupt */
-#define        EXTS_TI1NAKI    BIT(0)  /* NAK interrupt */
-       u32     extintr;
-#define        EXTI_TIE1       BIT(4)  /* general purpose timer interrupt enable 1 */
-#define        EXTI_TIE0       BIT(3)  /* general purpose timer interrupt enable 0 */
-#define        EXTI_UPIE       BIT(2)  /* USB host periodic interrupt enable */
-#define        EXTI_UAIE       BIT(1)  /* USB host asynchronous interrupt enable */
-#define        EXTI_NAKE       BIT(0)  /* NAK interrupt enable */
-       /* offset: 0x30 */
-       u32     usbcmd;
-#define        CMD_HIRD(u)     \
-       (((u)>>24)&0xf)         /* bits 27:24, host init resume duration */
-#define        CMD_ITC(u)      \
-       (((u)>>16)&0xff)        /* bits 23:16, interrupt threshold control */
-#define        CMD_PPE         BIT(15) /* per-port change events enable */
-#define        CMD_ATDTW       BIT(14) /* add dTD tripwire */
-#define        CMD_SUTW        BIT(13) /* setup tripwire */
-#define        CMD_ASPE        BIT(11) /* asynchronous schedule park mode enable */
-#define        CMD_FS2         BIT(10) /* frame list size */
-#define        CMD_ASP1        BIT(9)  /* asynchronous schedule park mode count */
-#define        CMD_ASP0        BIT(8)
-#define        CMD_LR          BIT(7)  /* light host/device controller reset */
-#define        CMD_IAA         BIT(6)  /* interrupt on async advance doorbell */
-#define        CMD_ASE         BIT(5)  /* asynchronous schedule enable */
-#define        CMD_PSE         BIT(4)  /* periodic schedule enable */
-#define        CMD_FS1         BIT(3)
-#define        CMD_FS0         BIT(2)
-#define        CMD_RST         BIT(1)  /* controller reset */
-#define        CMD_RUNSTOP     BIT(0)  /* run/stop */
-       u32     usbsts;
-#define        STS_PPCI(u)     \
-       (((u)>>16)&0xffff)      /* bits 31:16, port-n change detect */
-#define        STS_AS          BIT(15) /* asynchronous schedule status */
-#define        STS_PS          BIT(14) /* periodic schedule status */
-#define        STS_RCL         BIT(13) /* reclamation */
-#define        STS_HCH         BIT(12) /* HC halted */
-#define        STS_ULPII       BIT(10) /* ULPI interrupt */
-#define        STS_SLI         BIT(8)  /* DC suspend */
-#define        STS_SRI         BIT(7)  /* SOF received */
-#define        STS_URI         BIT(6)  /* USB reset received */
-#define        STS_AAI         BIT(5)  /* interrupt on async advance */
-#define        STS_SEI         BIT(4)  /* system error */
-#define        STS_FRI         BIT(3)  /* frame list rollover */
-#define        STS_PCI         BIT(2)  /* port change detect */
-#define        STS_UEI         BIT(1)  /* USB error interrupt */
-#define        STS_UI          BIT(0)  /* USB interrupt */
-       u32     usbintr;
-/* bits 31:16, per-port interrupt enable */
-#define        INTR_PPCE(u)    (((u)>>16)&0xffff)
-#define        INTR_ULPIE      BIT(10) /* ULPI enable */
-#define        INTR_SLE        BIT(8)  /* DC sleep/suspend enable */
-#define        INTR_SRE        BIT(7)  /* SOF received enable */
-#define        INTR_URE        BIT(6)  /* USB reset enable */
-#define        INTR_AAE        BIT(5)  /* interrupt on async advance enable */
-#define        INTR_SEE        BIT(4)  /* system error enable */
-#define        INTR_FRE        BIT(3)  /* frame list rollover enable */
-#define        INTR_PCE        BIT(2)  /* port change detect enable */
-#define        INTR_UEE        BIT(1)  /* USB error interrupt enable */
-#define        INTR_UE         BIT(0)  /* USB interrupt enable */
-       u32     frindex;        /* frame index */
-#define        FRINDEX_MASK    (0x3fff << 0)
-       u32     ctrldssegment;  /* not used */
-       u32     deviceaddr;
-#define USBADR_SHIFT   25
-#define        USBADR(d)       \
-       (((d)>>25)&0x7f)        /* bits 31:25, device address */
-#define USBADR_MASK    (0x7f << 25)
-#define        USBADRA         BIT(24) /* device address advance */
-       u32     endpointlistaddr;/* endpoint list top memory address */
-/* bits 31:11, endpoint list pointer */
-#define        EPBASE(d)       (((d)>>11)&0x1fffff)
-#define        ENDPOINTLISTADDR_MASK   (0x1fffff << 11)
-       u32     ttctrl;         /* H: TT operatin, not used */
-       /* offset: 0x50 */
-       u32     burstsize;      /* burst size of data movement */
-#define        TXPBURST(b)     \
-       (((b)>>8)&0xff)         /* bits 15:8, TX burst length */
-#define        RXPBURST(b)     \
-       (((b)>>0)&0xff)         /* bits 7:0, RX burst length */
-       u32     txfilltuning;   /* TX tuning */
-       u32     txttfilltuning; /* H: TX TT tuning */
-       u32     ic_usb;         /* control the IC_USB FS/LS transceiver */
-       /* offset: 0x60 */
-       u32     ulpi_viewport;  /* indirect access to ULPI PHY */
-#define        ULPIWU          BIT(31) /* ULPI wakeup */
-#define        ULPIRUN         BIT(30) /* ULPI read/write run */
-#define        ULPIRW          BIT(29) /* ULPI read/write control */
-#define        ULPISS          BIT(27) /* ULPI sync state */
-#define        ULPIPORT(u)     \
-       (((u)>>24)&7)           /* bits 26:24, ULPI port number */
-#define        ULPIADDR(u)     \
-       (((u)>>16)&0xff)        /* bits 23:16, ULPI data address */
-#define        ULPIDATRD(u)    \
-       (((u)>>8)&0xff)         /* bits 15:8, ULPI data read */
-#define        ULPIDATWR(u)    \
-       (((u)>>0)&0xff)         /* bits 7:0, ULPI date write */
-       u8      _reserved6[0x70-0x64];
-       /* offset: 0x70 */
-       u32     configflag;     /* H: not used */
-       u32     portsc1;        /* port status */
-#define        DA(p)   \
-       (((p)>>25)&0x7f)        /* bits 31:25, device address */
-#define        PORTS_SSTS      (BIT(24) | BIT(23))     /* suspend status */
-#define        PORTS_WKOC      BIT(22) /* wake on over-current enable */
-#define        PORTS_WKDS      BIT(21) /* wake on disconnect enable */
-#define        PORTS_WKCN      BIT(20) /* wake on connect enable */
-#define        PORTS_PTC(p)    (((p)>>16)&0xf) /* bits 19:16, port test control */
-#define        PORTS_PIC       (BIT(15) | BIT(14))     /* port indicator control */
-#define        PORTS_PO        BIT(13) /* port owner */
-#define        PORTS_PP        BIT(12) /* port power */
-#define        PORTS_LS        (BIT(11) | BIT(10))     /* line status */
-#define        PORTS_SLP       BIT(9)  /* suspend using L1 */
-#define        PORTS_PR        BIT(8)  /* port reset */
-#define        PORTS_SUSP      BIT(7)  /* suspend */
-#define        PORTS_FPR       BIT(6)  /* force port resume */
-#define        PORTS_OCC       BIT(5)  /* over-current change */
-#define        PORTS_OCA       BIT(4)  /* over-current active */
-#define        PORTS_PEC       BIT(3)  /* port enable/disable change */
-#define        PORTS_PE        BIT(2)  /* port enable/disable */
-#define        PORTS_CSC       BIT(1)  /* connect status change */
-#define        PORTS_CCS       BIT(0)  /* current connect status */
-       u8      _reserved7[0xb4-0x78];
-       /* offset: 0xb4 */
-       u32     devlc;          /* control LPM and each USB port behavior */
-/* bits 31:29, parallel transceiver select */
-#define        LPM_PTS(d)      (((d)>>29)&7)
-#define        LPM_STS         BIT(28) /* serial transceiver select */
-#define        LPM_PTW         BIT(27) /* parallel transceiver width */
-#define        LPM_PSPD(d)     (((d)>>25)&3)   /* bits 26:25, port speed */
-#define LPM_PSPD_MASK  (BIT(26) | BIT(25))
-#define LPM_SPEED_FULL 0
-#define LPM_SPEED_LOW  1
-#define LPM_SPEED_HIGH 2
-#define        LPM_SRT         BIT(24) /* shorten reset time */
-#define        LPM_PFSC        BIT(23) /* port force full speed connect */
-#define        LPM_PHCD        BIT(22) /* PHY low power suspend clock disable */
-#define        LPM_STL         BIT(16) /* STALL reply to LPM token */
-#define        LPM_BA(d)       \
-       (((d)>>1)&0x7ff)        /* bits 11:1, BmAttributes */
-#define        LPM_NYT_ACK     BIT(0)  /* NYET/ACK reply to LPM token */
-       u8      _reserved8[0xf4-0xb8];
-       /* offset: 0xf4 */
-       u32     otgsc;          /* On-The-Go status and control */
-#define        OTGSC_DPIE      BIT(30) /* data pulse interrupt enable */
-#define        OTGSC_MSE       BIT(29) /* 1 ms timer interrupt enable */
-#define        OTGSC_BSEIE     BIT(28) /* B session end interrupt enable */
-#define        OTGSC_BSVIE     BIT(27) /* B session valid interrupt enable */
-#define        OTGSC_ASVIE     BIT(26) /* A session valid interrupt enable */
-#define        OTGSC_AVVIE     BIT(25) /* A VBUS valid interrupt enable */
-#define        OTGSC_IDIE      BIT(24) /* USB ID interrupt enable */
-#define        OTGSC_DPIS      BIT(22) /* data pulse interrupt status */
-#define        OTGSC_MSS       BIT(21) /* 1 ms timer interrupt status */
-#define        OTGSC_BSEIS     BIT(20) /* B session end interrupt status */
-#define        OTGSC_BSVIS     BIT(19) /* B session valid interrupt status */
-#define        OTGSC_ASVIS     BIT(18) /* A session valid interrupt status */
-#define        OTGSC_AVVIS     BIT(17) /* A VBUS valid interrupt status */
-#define        OTGSC_IDIS      BIT(16) /* USB ID interrupt status */
-#define        OTGSC_DPS       BIT(14) /* data bus pulsing status */
-#define        OTGSC_MST       BIT(13) /* 1 ms timer toggle */
-#define        OTGSC_BSE       BIT(12) /* B session end */
-#define        OTGSC_BSV       BIT(11) /* B session valid */
-#define        OTGSC_ASV       BIT(10) /* A session valid */
-#define        OTGSC_AVV       BIT(9)  /* A VBUS valid */
-#define        OTGSC_USBID     BIT(8)  /* USB ID */
-#define        OTGSC_HABA      BIT(7)  /* hw assist B-disconnect to A-connect */
-#define        OTGSC_HADP      BIT(6)  /* hw assist data pulse */
-#define        OTGSC_IDPU      BIT(5)  /* ID pullup */
-#define        OTGSC_DP        BIT(4)  /* data pulsing */
-#define        OTGSC_OT        BIT(3)  /* OTG termination */
-#define        OTGSC_HAAR      BIT(2)  /* hw assist auto reset */
-#define        OTGSC_VC        BIT(1)  /* VBUS charge */
-#define        OTGSC_VD        BIT(0)  /* VBUS discharge */
-       u32     usbmode;
-#define        MODE_VBPS       BIT(5)  /* R/W VBUS power select */
-#define        MODE_SDIS       BIT(4)  /* R/W stream disable mode */
-#define        MODE_SLOM       BIT(3)  /* R/W setup lockout mode */
-#define        MODE_ENSE       BIT(2)  /* endian select */
-#define        MODE_CM(u)      (((u)>>0)&3)    /* bits 1:0, controller mode */
-#define        MODE_IDLE       0
-#define        MODE_DEVICE     2
-#define        MODE_HOST       3
-       u8      _reserved9[0x100-0xfc];
-       /* offset: 0x100 */
-       u32     endptnak;
-#define        EPTN(e)         \
-       (((e)>>16)&0xffff)      /* bits 31:16, TX endpoint NAK */
-#define        EPRN(e)         \
-       (((e)>>0)&0xffff)       /* bits 15:0, RX endpoint NAK */
-       u32     endptnaken;
-#define        EPTNE(e)        \
-       (((e)>>16)&0xffff)      /* bits 31:16, TX endpoint NAK enable */
-#define        EPRNE(e)        \
-       (((e)>>0)&0xffff)       /* bits 15:0, RX endpoint NAK enable */
-       u32     endptsetupstat;
-#define        SETUPSTAT_MASK          (0xffff << 0)   /* bits 15:0 */
-#define EP0SETUPSTAT_MASK      1
-       u32     endptprime;
-/* bits 31:16, prime endpoint transmit buffer */
-#define        PETB(e)         (((e)>>16)&0xffff)
-/* bits 15:0, prime endpoint receive buffer */
-#define        PERB(e)         (((e)>>0)&0xffff)
-       /* offset: 0x110 */
-       u32     endptflush;
-/* bits 31:16, flush endpoint transmit buffer */
-#define        FETB(e)         (((e)>>16)&0xffff)
-/* bits 15:0, flush endpoint receive buffer */
-#define        FERB(e)         (((e)>>0)&0xffff)
-       u32     endptstat;
-/* bits 31:16, endpoint transmit buffer ready */
-#define        ETBR(e)         (((e)>>16)&0xffff)
-/* bits 15:0, endpoint receive buffer ready */
-#define        ERBR(e)         (((e)>>0)&0xffff)
-       u32     endptcomplete;
-/* bits 31:16, endpoint transmit complete event */
-#define        ETCE(e)         (((e)>>16)&0xffff)
-/* bits 15:0, endpoint receive complete event */
-#define        ERCE(e)         (((e)>>0)&0xffff)
-       /* offset: 0x11c */
-       u32     endptctrl[16];
-#define        EPCTRL_TXE      BIT(23) /* TX endpoint enable */
-#define        EPCTRL_TXR      BIT(22) /* TX data toggle reset */
-#define        EPCTRL_TXI      BIT(21) /* TX data toggle inhibit */
-#define        EPCTRL_TXT(e)   (((e)>>18)&3)   /* bits 19:18, TX endpoint type */
-#define        EPCTRL_TXT_SHIFT        18
-#define        EPCTRL_TXD      BIT(17) /* TX endpoint data source */
-#define        EPCTRL_TXS      BIT(16) /* TX endpoint STALL */
-#define        EPCTRL_RXE      BIT(7)  /* RX endpoint enable */
-#define        EPCTRL_RXR      BIT(6)  /* RX data toggle reset */
-#define        EPCTRL_RXI      BIT(5)  /* RX data toggle inhibit */
-#define        EPCTRL_RXT(e)   (((e)>>2)&3)    /* bits 3:2, RX endpoint type */
-#define        EPCTRL_RXT_SHIFT        2       /* bits 19:18, TX endpoint type */
-#define        EPCTRL_RXD      BIT(1)  /* RX endpoint data sink */
-#define        EPCTRL_RXS      BIT(0)  /* RX endpoint STALL */
-} __attribute__ ((packed));
-
-#endif /* __LANGWELL_UDC_H */
-