+++ /dev/null
-/*
- * Intel Langwell USB Device Controller driver
- * Copyright (C) 2008-2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- */
-
-
-/* #undef DEBUG */
-/* #undef VERBOSE_DEBUG */
-
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
-#include <linux/device.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb/otg.h>
-#include <linux/pm.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <asm/unaligned.h>
-
-#include "langwell_udc.h"
-
-
-#define DRIVER_DESC "Intel Langwell USB Device Controller driver"
-#define DRIVER_VERSION "16 May 2009"
-
-static const char driver_name[] = "langwell_udc";
-static const char driver_desc[] = DRIVER_DESC;
-
-
-/* for endpoint 0 operations */
-static const struct usb_endpoint_descriptor
-langwell_ep0_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = 0,
- .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
- .wMaxPacketSize = EP0_MAX_PKT_SIZE,
-};
-
-
-/*-------------------------------------------------------------------------*/
-/* debugging */
-
-#ifdef VERBOSE_DEBUG
-static inline void print_all_registers(struct langwell_udc *dev)
-{
- int i;
-
- /* Capability Registers */
- dev_dbg(&dev->pdev->dev,
- "Capability Registers (offset: 0x%04x, length: 0x%08x)\n",
- CAP_REG_OFFSET, (u32)sizeof(struct langwell_cap_regs));
- dev_dbg(&dev->pdev->dev, "caplength=0x%02x\n",
- readb(&dev->cap_regs->caplength));
- dev_dbg(&dev->pdev->dev, "hciversion=0x%04x\n",
- readw(&dev->cap_regs->hciversion));
- dev_dbg(&dev->pdev->dev, "hcsparams=0x%08x\n",
- readl(&dev->cap_regs->hcsparams));
- dev_dbg(&dev->pdev->dev, "hccparams=0x%08x\n",
- readl(&dev->cap_regs->hccparams));
- dev_dbg(&dev->pdev->dev, "dciversion=0x%04x\n",
- readw(&dev->cap_regs->dciversion));
- dev_dbg(&dev->pdev->dev, "dccparams=0x%08x\n",
- readl(&dev->cap_regs->dccparams));
-
- /* Operational Registers */
- dev_dbg(&dev->pdev->dev,
- "Operational Registers (offset: 0x%04x, length: 0x%08x)\n",
- OP_REG_OFFSET, (u32)sizeof(struct langwell_op_regs));
- dev_dbg(&dev->pdev->dev, "extsts=0x%08x\n",
- readl(&dev->op_regs->extsts));
- dev_dbg(&dev->pdev->dev, "extintr=0x%08x\n",
- readl(&dev->op_regs->extintr));
- dev_dbg(&dev->pdev->dev, "usbcmd=0x%08x\n",
- readl(&dev->op_regs->usbcmd));
- dev_dbg(&dev->pdev->dev, "usbsts=0x%08x\n",
- readl(&dev->op_regs->usbsts));
- dev_dbg(&dev->pdev->dev, "usbintr=0x%08x\n",
- readl(&dev->op_regs->usbintr));
- dev_dbg(&dev->pdev->dev, "frindex=0x%08x\n",
- readl(&dev->op_regs->frindex));
- dev_dbg(&dev->pdev->dev, "ctrldssegment=0x%08x\n",
- readl(&dev->op_regs->ctrldssegment));
- dev_dbg(&dev->pdev->dev, "deviceaddr=0x%08x\n",
- readl(&dev->op_regs->deviceaddr));
- dev_dbg(&dev->pdev->dev, "endpointlistaddr=0x%08x\n",
- readl(&dev->op_regs->endpointlistaddr));
- dev_dbg(&dev->pdev->dev, "ttctrl=0x%08x\n",
- readl(&dev->op_regs->ttctrl));
- dev_dbg(&dev->pdev->dev, "burstsize=0x%08x\n",
- readl(&dev->op_regs->burstsize));
- dev_dbg(&dev->pdev->dev, "txfilltuning=0x%08x\n",
- readl(&dev->op_regs->txfilltuning));
- dev_dbg(&dev->pdev->dev, "txttfilltuning=0x%08x\n",
- readl(&dev->op_regs->txttfilltuning));
- dev_dbg(&dev->pdev->dev, "ic_usb=0x%08x\n",
- readl(&dev->op_regs->ic_usb));
- dev_dbg(&dev->pdev->dev, "ulpi_viewport=0x%08x\n",
- readl(&dev->op_regs->ulpi_viewport));
- dev_dbg(&dev->pdev->dev, "configflag=0x%08x\n",
- readl(&dev->op_regs->configflag));
- dev_dbg(&dev->pdev->dev, "portsc1=0x%08x\n",
- readl(&dev->op_regs->portsc1));
- dev_dbg(&dev->pdev->dev, "devlc=0x%08x\n",
- readl(&dev->op_regs->devlc));
- dev_dbg(&dev->pdev->dev, "otgsc=0x%08x\n",
- readl(&dev->op_regs->otgsc));
- dev_dbg(&dev->pdev->dev, "usbmode=0x%08x\n",
- readl(&dev->op_regs->usbmode));
- dev_dbg(&dev->pdev->dev, "endptnak=0x%08x\n",
- readl(&dev->op_regs->endptnak));
- dev_dbg(&dev->pdev->dev, "endptnaken=0x%08x\n",
- readl(&dev->op_regs->endptnaken));
- dev_dbg(&dev->pdev->dev, "endptsetupstat=0x%08x\n",
- readl(&dev->op_regs->endptsetupstat));
- dev_dbg(&dev->pdev->dev, "endptprime=0x%08x\n",
- readl(&dev->op_regs->endptprime));
- dev_dbg(&dev->pdev->dev, "endptflush=0x%08x\n",
- readl(&dev->op_regs->endptflush));
- dev_dbg(&dev->pdev->dev, "endptstat=0x%08x\n",
- readl(&dev->op_regs->endptstat));
- dev_dbg(&dev->pdev->dev, "endptcomplete=0x%08x\n",
- readl(&dev->op_regs->endptcomplete));
-
- for (i = 0; i < dev->ep_max / 2; i++) {
- dev_dbg(&dev->pdev->dev, "endptctrl[%d]=0x%08x\n",
- i, readl(&dev->op_regs->endptctrl[i]));
- }
-}
-#else
-
-#define print_all_registers(dev) do { } while (0)
-
-#endif /* VERBOSE_DEBUG */
-
-
-/*-------------------------------------------------------------------------*/
-
-#define is_in(ep) (((ep)->ep_num == 0) ? ((ep)->dev->ep0_dir == \
- USB_DIR_IN) : (usb_endpoint_dir_in((ep)->ep.desc)))
-
-#define DIR_STRING(ep) (is_in(ep) ? "in" : "out")
-
-
-static char *type_string(const struct usb_endpoint_descriptor *desc)
-{
- switch (usb_endpoint_type(desc)) {
- case USB_ENDPOINT_XFER_BULK:
- return "bulk";
- case USB_ENDPOINT_XFER_ISOC:
- return "iso";
- case USB_ENDPOINT_XFER_INT:
- return "int";
- };
-
- return "control";
-}
-
-
-/* configure endpoint control registers */
-static void ep_reset(struct langwell_ep *ep, unsigned char ep_num,
- unsigned char is_in, unsigned char ep_type)
-{
- struct langwell_udc *dev;
- u32 endptctrl;
-
- dev = ep->dev;
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
- if (is_in) { /* TX */
- if (ep_num)
- endptctrl |= EPCTRL_TXR;
- endptctrl |= EPCTRL_TXE;
- endptctrl |= ep_type << EPCTRL_TXT_SHIFT;
- } else { /* RX */
- if (ep_num)
- endptctrl |= EPCTRL_RXR;
- endptctrl |= EPCTRL_RXE;
- endptctrl |= ep_type << EPCTRL_RXT_SHIFT;
- }
-
- writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* reset ep0 dQH and endptctrl */
-static void ep0_reset(struct langwell_udc *dev)
-{
- struct langwell_ep *ep;
- int i;
-
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- /* ep0 in and out */
- for (i = 0; i < 2; i++) {
- ep = &dev->ep[i];
- ep->dev = dev;
-
- /* ep0 dQH */
- ep->dqh = &dev->ep_dqh[i];
-
- /* configure ep0 endpoint capabilities in dQH */
- ep->dqh->dqh_ios = 1;
- ep->dqh->dqh_mpl = EP0_MAX_PKT_SIZE;
-
- /* enable ep0-in HW zero length termination select */
- if (is_in(ep))
- ep->dqh->dqh_zlt = 0;
- ep->dqh->dqh_mult = 0;
-
- ep->dqh->dtd_next = DTD_TERM;
-
- /* configure ep0 control registers */
- ep_reset(&dev->ep[0], 0, i, USB_ENDPOINT_XFER_CONTROL);
- }
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* endpoints operations */
-
-/* configure endpoint, making it usable */
-static int langwell_ep_enable(struct usb_ep *_ep,
- const struct usb_endpoint_descriptor *desc)
-{
- struct langwell_udc *dev;
- struct langwell_ep *ep;
- u16 max = 0;
- unsigned long flags;
- int i, retval = 0;
- unsigned char zlt, ios = 0, mult = 0;
-
- ep = container_of(_ep, struct langwell_ep, ep);
- dev = ep->dev;
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- if (!_ep || !desc || ep->ep.desc
- || desc->bDescriptorType != USB_DT_ENDPOINT)
- return -EINVAL;
-
- if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
- return -ESHUTDOWN;
-
- max = usb_endpoint_maxp(desc);
-
- /*
- * disable HW zero length termination select
- * driver handles zero length packet through req->req.zero
- */
- zlt = 1;
-
- /*
- * sanity check type, direction, address, and then
- * initialize the endpoint capabilities fields in dQH
- */
- switch (usb_endpoint_type(desc)) {
- case USB_ENDPOINT_XFER_CONTROL:
- ios = 1;
- break;
- case USB_ENDPOINT_XFER_BULK:
- if ((dev->gadget.speed == USB_SPEED_HIGH
- && max != 512)
- || (dev->gadget.speed == USB_SPEED_FULL
- && max > 64)) {
- goto done;
- }
- break;
- case USB_ENDPOINT_XFER_INT:
- if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
- goto done;
-
- switch (dev->gadget.speed) {
- case USB_SPEED_HIGH:
- if (max <= 1024)
- break;
- case USB_SPEED_FULL:
- if (max <= 64)
- break;
- default:
- if (max <= 8)
- break;
- goto done;
- }
- break;
- case USB_ENDPOINT_XFER_ISOC:
- if (strstr(ep->ep.name, "-bulk")
- || strstr(ep->ep.name, "-int"))
- goto done;
-
- switch (dev->gadget.speed) {
- case USB_SPEED_HIGH:
- if (max <= 1024)
- break;
- case USB_SPEED_FULL:
- if (max <= 1023)
- break;
- default:
- goto done;
- }
- /*
- * FIXME:
- * calculate transactions needed for high bandwidth iso
- */
- mult = (unsigned char)(1 + ((max >> 11) & 0x03));
- max = max & 0x8ff; /* bit 0~10 */
- /* 3 transactions at most */
- if (mult > 3)
- goto done;
- break;
- default:
- goto done;
- }
-
- spin_lock_irqsave(&dev->lock, flags);
-
- ep->ep.maxpacket = max;
- ep->ep.desc = desc;
- ep->stopped = 0;
- ep->ep_num = usb_endpoint_num(desc);
-
- /* ep_type */
- ep->ep_type = usb_endpoint_type(desc);
-
- /* configure endpoint control registers */
- ep_reset(ep, ep->ep_num, is_in(ep), ep->ep_type);
-
- /* configure endpoint capabilities in dQH */
- i = ep->ep_num * 2 + is_in(ep);
- ep->dqh = &dev->ep_dqh[i];
- ep->dqh->dqh_ios = ios;
- ep->dqh->dqh_mpl = cpu_to_le16(max);
- ep->dqh->dqh_zlt = zlt;
- ep->dqh->dqh_mult = mult;
- ep->dqh->dtd_next = DTD_TERM;
-
- dev_dbg(&dev->pdev->dev, "enabled %s (ep%d%s-%s), max %04x\n",
- _ep->name,
- ep->ep_num,
- DIR_STRING(ep),
- type_string(desc),
- max);
-
- spin_unlock_irqrestore(&dev->lock, flags);
-done:
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return retval;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* retire a request */
-static void done(struct langwell_ep *ep, struct langwell_request *req,
- int status)
-{
- struct langwell_udc *dev = ep->dev;
- unsigned stopped = ep->stopped;
- struct langwell_dtd *curr_dtd, *next_dtd;
- int i;
-
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- /* remove the req from ep->queue */
- list_del_init(&req->queue);
-
- if (req->req.status == -EINPROGRESS)
- req->req.status = status;
- else
- status = req->req.status;
-
- /* free dTD for the request */
- next_dtd = req->head;
- for (i = 0; i < req->dtd_count; i++) {
- curr_dtd = next_dtd;
- if (i != req->dtd_count - 1)
- next_dtd = curr_dtd->next_dtd_virt;
- dma_pool_free(dev->dtd_pool, curr_dtd, curr_dtd->dtd_dma);
- }
-
- usb_gadget_unmap_request(&dev->gadget, &req->req, is_in(ep));
-
- if (status != -ESHUTDOWN)
- dev_dbg(&dev->pdev->dev,
- "complete %s, req %p, stat %d, len %u/%u\n",
- ep->ep.name, &req->req, status,
- req->req.actual, req->req.length);
-
- /* don't modify queue heads during completion callback */
- ep->stopped = 1;
-
- spin_unlock(&dev->lock);
- /* complete routine from gadget driver */
- if (req->req.complete)
- req->req.complete(&ep->ep, &req->req);
-
- spin_lock(&dev->lock);
- ep->stopped = stopped;
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-static void langwell_ep_fifo_flush(struct usb_ep *_ep);
-
-/* delete all endpoint requests, called with spinlock held */
-static void nuke(struct langwell_ep *ep, int status)
-{
- /* called with spinlock held */
- ep->stopped = 1;
-
- /* endpoint fifo flush */
- if (&ep->ep && ep->ep.desc)
- langwell_ep_fifo_flush(&ep->ep);
-
- while (!list_empty(&ep->queue)) {
- struct langwell_request *req = NULL;
- req = list_entry(ep->queue.next, struct langwell_request,
- queue);
- done(ep, req, status);
- }
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* endpoint is no longer usable */
-static int langwell_ep_disable(struct usb_ep *_ep)
-{
- struct langwell_ep *ep;
- unsigned long flags;
- struct langwell_udc *dev;
- int ep_num;
- u32 endptctrl;
-
- ep = container_of(_ep, struct langwell_ep, ep);
- dev = ep->dev;
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- if (!_ep || !ep->ep.desc)
- return -EINVAL;
-
- spin_lock_irqsave(&dev->lock, flags);
-
- /* disable endpoint control register */
- ep_num = ep->ep_num;
- endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
- if (is_in(ep))
- endptctrl &= ~EPCTRL_TXE;
- else
- endptctrl &= ~EPCTRL_RXE;
- writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
- /* nuke all pending requests (does flush) */
- nuke(ep, -ESHUTDOWN);
-
- ep->ep.desc = NULL;
- ep->stopped = 1;
-
- spin_unlock_irqrestore(&dev->lock, flags);
-
- dev_dbg(&dev->pdev->dev, "disabled %s\n", _ep->name);
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
- return 0;
-}
-
-
-/* allocate a request object to use with this endpoint */
-static struct usb_request *langwell_alloc_request(struct usb_ep *_ep,
- gfp_t gfp_flags)
-{
- struct langwell_ep *ep;
- struct langwell_udc *dev;
- struct langwell_request *req = NULL;
-
- if (!_ep)
- return NULL;
-
- ep = container_of(_ep, struct langwell_ep, ep);
- dev = ep->dev;
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- req = kzalloc(sizeof(*req), gfp_flags);
- if (!req)
- return NULL;
-
- req->req.dma = DMA_ADDR_INVALID;
- INIT_LIST_HEAD(&req->queue);
-
- dev_vdbg(&dev->pdev->dev, "alloc request for %s\n", _ep->name);
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return &req->req;
-}
-
-
-/* free a request object */
-static void langwell_free_request(struct usb_ep *_ep,
- struct usb_request *_req)
-{
- struct langwell_ep *ep;
- struct langwell_udc *dev;
- struct langwell_request *req = NULL;
-
- ep = container_of(_ep, struct langwell_ep, ep);
- dev = ep->dev;
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- if (!_ep || !_req)
- return;
-
- req = container_of(_req, struct langwell_request, req);
- WARN_ON(!list_empty(&req->queue));
-
- if (_req)
- kfree(req);
-
- dev_vdbg(&dev->pdev->dev, "free request for %s\n", _ep->name);
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* queue dTD and PRIME endpoint */
-static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
-{
- u32 bit_mask, usbcmd, endptstat, dtd_dma;
- u8 dtd_status;
- int i;
- struct langwell_dqh *dqh;
- struct langwell_udc *dev;
-
- dev = ep->dev;
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- i = ep->ep_num * 2 + is_in(ep);
- dqh = &dev->ep_dqh[i];
-
- if (ep->ep_num)
- dev_vdbg(&dev->pdev->dev, "%s\n", ep->name);
- else
- /* ep0 */
- dev_vdbg(&dev->pdev->dev, "%s-%s\n", ep->name, DIR_STRING(ep));
-
- dev_vdbg(&dev->pdev->dev, "ep_dqh[%d] addr: 0x%p\n",
- i, &(dev->ep_dqh[i]));
-
- bit_mask = is_in(ep) ?
- (1 << (ep->ep_num + 16)) : (1 << (ep->ep_num));
-
- dev_vdbg(&dev->pdev->dev, "bit_mask = 0x%08x\n", bit_mask);
-
- /* check if the pipe is empty */
- if (!(list_empty(&ep->queue))) {
- /* add dTD to the end of linked list */
- struct langwell_request *lastreq;
- lastreq = list_entry(ep->queue.prev,
- struct langwell_request, queue);
-
- lastreq->tail->dtd_next =
- cpu_to_le32(req->head->dtd_dma & DTD_NEXT_MASK);
-
- /* read prime bit, if 1 goto out */
- if (readl(&dev->op_regs->endptprime) & bit_mask)
- goto out;
-
- do {
- /* set ATDTW bit in USBCMD */
- usbcmd = readl(&dev->op_regs->usbcmd);
- writel(usbcmd | CMD_ATDTW, &dev->op_regs->usbcmd);
-
- /* read correct status bit */
- endptstat = readl(&dev->op_regs->endptstat) & bit_mask;
-
- } while (!(readl(&dev->op_regs->usbcmd) & CMD_ATDTW));
-
- /* write ATDTW bit to 0 */
- usbcmd = readl(&dev->op_regs->usbcmd);
- writel(usbcmd & ~CMD_ATDTW, &dev->op_regs->usbcmd);
-
- if (endptstat)
- goto out;
- }
-
- /* write dQH next pointer and terminate bit to 0 */
- dtd_dma = req->head->dtd_dma & DTD_NEXT_MASK;
- dqh->dtd_next = cpu_to_le32(dtd_dma);
-
- /* clear active and halt bit */
- dtd_status = (u8) ~(DTD_STS_ACTIVE | DTD_STS_HALTED);
- dqh->dtd_status &= dtd_status;
- dev_vdbg(&dev->pdev->dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status);
-
- /* ensure that updates to the dQH will occur before priming */
- wmb();
-
- /* write 1 to endptprime register to PRIME endpoint */
- bit_mask = is_in(ep) ? (1 << (ep->ep_num + 16)) : (1 << ep->ep_num);
- dev_vdbg(&dev->pdev->dev, "endprime bit_mask = 0x%08x\n", bit_mask);
- writel(bit_mask, &dev->op_regs->endptprime);
-out:
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return 0;
-}
-
-
-/* fill in the dTD structure to build a transfer descriptor */
-static struct langwell_dtd *build_dtd(struct langwell_request *req,
- unsigned *length, dma_addr_t *dma, int *is_last)
-{
- u32 buf_ptr;
- struct langwell_dtd *dtd;
- struct langwell_udc *dev;
- int i;
-
- dev = req->ep->dev;
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- /* the maximum transfer length, up to 16k bytes */
- *length = min(req->req.length - req->req.actual,
- (unsigned)DTD_MAX_TRANSFER_LENGTH);
-
- /* create dTD dma_pool resource */
- dtd = dma_pool_alloc(dev->dtd_pool, GFP_KERNEL, dma);
- if (dtd == NULL)
- return dtd;
- dtd->dtd_dma = *dma;
-
- /* initialize buffer page pointers */
- buf_ptr = (u32)(req->req.dma + req->req.actual);
- for (i = 0; i < 5; i++)
- dtd->dtd_buf[i] = cpu_to_le32(buf_ptr + i * PAGE_SIZE);
-
- req->req.actual += *length;
-
- /* fill in total bytes with transfer size */
- dtd->dtd_total = cpu_to_le16(*length);
- dev_vdbg(&dev->pdev->dev, "dtd->dtd_total = %d\n", dtd->dtd_total);
-
- /* set is_last flag if req->req.zero is set or not */
- if (req->req.zero) {
- if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
- *is_last = 1;
- else
- *is_last = 0;
- } else if (req->req.length == req->req.actual) {
- *is_last = 1;
- } else
- *is_last = 0;
-
- if (*is_last == 0)
- dev_vdbg(&dev->pdev->dev, "multi-dtd request!\n");
-
- /* set interrupt on complete bit for the last dTD */
- if (*is_last && !req->req.no_interrupt)
- dtd->dtd_ioc = 1;
-
- /* set multiplier override 0 for non-ISO and non-TX endpoint */
- dtd->dtd_multo = 0;
-
- /* set the active bit of status field to 1 */
- dtd->dtd_status = DTD_STS_ACTIVE;
- dev_vdbg(&dev->pdev->dev, "dtd->dtd_status = 0x%02x\n",
- dtd->dtd_status);
-
- dev_vdbg(&dev->pdev->dev, "length = %d, dma addr= 0x%08x\n",
- *length, (int)*dma);
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return dtd;
-}
-
-
-/* generate dTD linked list for a request */
-static int req_to_dtd(struct langwell_request *req)
-{
- unsigned count;
- int is_last, is_first = 1;
- struct langwell_dtd *dtd, *last_dtd = NULL;
- struct langwell_udc *dev;
- dma_addr_t dma;
-
- dev = req->ep->dev;
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
- do {
- dtd = build_dtd(req, &count, &dma, &is_last);
- if (dtd == NULL)
- return -ENOMEM;
-
- if (is_first) {
- is_first = 0;
- req->head = dtd;
- } else {
- last_dtd->dtd_next = cpu_to_le32(dma);
- last_dtd->next_dtd_virt = dtd;
- }
- last_dtd = dtd;
- req->dtd_count++;
- } while (!is_last);
-
- /* set terminate bit to 1 for the last dTD */
- dtd->dtd_next = DTD_TERM;
-
- req->tail = dtd;
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* queue (submits) an I/O requests to an endpoint */
-static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
- gfp_t gfp_flags)
-{
- struct langwell_request *req;
- struct langwell_ep *ep;
- struct langwell_udc *dev;
- unsigned long flags;
- int is_iso = 0;
- int ret;
-
- /* always require a cpu-view buffer */
- req = container_of(_req, struct langwell_request, req);
- ep = container_of(_ep, struct langwell_ep, ep);
-
- if (!_req || !_req->complete || !_req->buf
- || !list_empty(&req->queue)) {
- return -EINVAL;
- }
-
- if (unlikely(!_ep || !ep->ep.desc))
- return -EINVAL;
-
- dev = ep->dev;
- req->ep = ep;
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- if (usb_endpoint_xfer_isoc(ep->ep.desc)) {
- if (req->req.length > ep->ep.maxpacket)
- return -EMSGSIZE;
- is_iso = 1;
- }
-
- if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
- return -ESHUTDOWN;
-
- /* set up dma mapping */
- ret = usb_gadget_map_request(&dev->gadget, &req->req, is_in(ep));
- if (ret)
- return ret;
-
- dev_dbg(&dev->pdev->dev,
- "%s queue req %p, len %u, buf %p, dma 0x%08x\n",
- _ep->name,
- _req, _req->length, _req->buf, (int)_req->dma);
-
- _req->status = -EINPROGRESS;
- _req->actual = 0;
- req->dtd_count = 0;
-
- spin_lock_irqsave(&dev->lock, flags);
-
- /* build and put dTDs to endpoint queue */
- if (!req_to_dtd(req)) {
- queue_dtd(ep, req);
- } else {
- spin_unlock_irqrestore(&dev->lock, flags);
- return -ENOMEM;
- }
-
- /* update ep0 state */
- if (ep->ep_num == 0)
- dev->ep0_state = DATA_STATE_XMIT;
-
- if (likely(req != NULL)) {
- list_add_tail(&req->queue, &ep->queue);
- dev_vdbg(&dev->pdev->dev, "list_add_tail()\n");
- }
-
- spin_unlock_irqrestore(&dev->lock, flags);
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return 0;
-}
-
-
-/* dequeue (cancels, unlinks) an I/O request from an endpoint */
-static int langwell_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-{
- struct langwell_ep *ep;
- struct langwell_udc *dev;
- struct langwell_request *req;
- unsigned long flags;
- int stopped, ep_num, retval = 0;
- u32 endptctrl;
-
- ep = container_of(_ep, struct langwell_ep, ep);
- dev = ep->dev;
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- if (!_ep || !ep->ep.desc || !_req)
- return -EINVAL;
-
- if (!dev->driver)
- return -ESHUTDOWN;
-
- spin_lock_irqsave(&dev->lock, flags);
- stopped = ep->stopped;
-
- /* quiesce dma while we patch the queue */
- ep->stopped = 1;
- ep_num = ep->ep_num;
-
- /* disable endpoint control register */
- endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
- if (is_in(ep))
- endptctrl &= ~EPCTRL_TXE;
- else
- endptctrl &= ~EPCTRL_RXE;
- writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
- /* make sure it's still queued on this endpoint */
- list_for_each_entry(req, &ep->queue, queue) {
- if (&req->req == _req)
- break;
- }
-
- if (&req->req != _req) {
- retval = -EINVAL;
- goto done;
- }
-
- /* queue head may be partially complete. */
- if (ep->queue.next == &req->queue) {
- dev_dbg(&dev->pdev->dev, "unlink (%s) dma\n", _ep->name);
- _req->status = -ECONNRESET;
- langwell_ep_fifo_flush(&ep->ep);
-
- /* not the last request in endpoint queue */
- if (likely(ep->queue.next == &req->queue)) {
- struct langwell_dqh *dqh;
- struct langwell_request *next_req;
-
- dqh = ep->dqh;
- next_req = list_entry(req->queue.next,
- struct langwell_request, queue);
-
- /* point the dQH to the first dTD of next request */
- writel((u32) next_req->head, &dqh->dqh_current);
- }
- } else {
- struct langwell_request *prev_req;
-
- prev_req = list_entry(req->queue.prev,
- struct langwell_request, queue);
- writel(readl(&req->tail->dtd_next),
- &prev_req->tail->dtd_next);
- }
-
- done(ep, req, -ECONNRESET);
-
-done:
- /* enable endpoint again */
- endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
- if (is_in(ep))
- endptctrl |= EPCTRL_TXE;
- else
- endptctrl |= EPCTRL_RXE;
- writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
- ep->stopped = stopped;
- spin_unlock_irqrestore(&dev->lock, flags);
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return retval;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* endpoint set/clear halt */
-static void ep_set_halt(struct langwell_ep *ep, int value)
-{
- u32 endptctrl = 0;
- int ep_num;
- struct langwell_udc *dev = ep->dev;
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- ep_num = ep->ep_num;
- endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
-
- /* value: 1 - set halt, 0 - clear halt */
- if (value) {
- /* set the stall bit */
- if (is_in(ep))
- endptctrl |= EPCTRL_TXS;
- else
- endptctrl |= EPCTRL_RXS;
- } else {
- /* clear the stall bit and reset data toggle */
- if (is_in(ep)) {
- endptctrl &= ~EPCTRL_TXS;
- endptctrl |= EPCTRL_TXR;
- } else {
- endptctrl &= ~EPCTRL_RXS;
- endptctrl |= EPCTRL_RXR;
- }
- }
-
- writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* set the endpoint halt feature */
-static int langwell_ep_set_halt(struct usb_ep *_ep, int value)
-{
- struct langwell_ep *ep;
- struct langwell_udc *dev;
- unsigned long flags;
- int retval = 0;
-
- ep = container_of(_ep, struct langwell_ep, ep);
- dev = ep->dev;
-
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- if (!_ep || !ep->ep.desc)
- return -EINVAL;
-
- if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
- return -ESHUTDOWN;
-
- if (usb_endpoint_xfer_isoc(ep->ep.desc))
- return -EOPNOTSUPP;
-
- spin_lock_irqsave(&dev->lock, flags);
-
- /*
- * attempt to halt IN ep will fail if any transfer requests
- * are still queue
- */
- if (!list_empty(&ep->queue) && is_in(ep) && value) {
- /* IN endpoint FIFO holds bytes */
- dev_dbg(&dev->pdev->dev, "%s FIFO holds bytes\n", _ep->name);
- retval = -EAGAIN;
- goto done;
- }
-
- /* endpoint set/clear halt */
- if (ep->ep_num) {
- ep_set_halt(ep, value);
- } else { /* endpoint 0 */
- dev->ep0_state = WAIT_FOR_SETUP;
- dev->ep0_dir = USB_DIR_OUT;
- }
-done:
- spin_unlock_irqrestore(&dev->lock, flags);
- dev_dbg(&dev->pdev->dev, "%s %s halt\n",
- _ep->name, value ? "set" : "clear");
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return retval;
-}
-
-
-/* set the halt feature and ignores clear requests */
-static int langwell_ep_set_wedge(struct usb_ep *_ep)
-{
- struct langwell_ep *ep;
- struct langwell_udc *dev;
-
- ep = container_of(_ep, struct langwell_ep, ep);
- dev = ep->dev;
-
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- if (!_ep || !ep->ep.desc)
- return -EINVAL;
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return usb_ep_set_halt(_ep);
-}
-
-
-/* flush contents of a fifo */
-static void langwell_ep_fifo_flush(struct usb_ep *_ep)
-{
- struct langwell_ep *ep;
- struct langwell_udc *dev;
- u32 flush_bit;
- unsigned long timeout;
-
- ep = container_of(_ep, struct langwell_ep, ep);
- dev = ep->dev;
-
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- if (!_ep || !ep->ep.desc) {
- dev_vdbg(&dev->pdev->dev, "ep or ep->ep.desc is NULL\n");
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return;
- }
-
- dev_vdbg(&dev->pdev->dev, "%s-%s fifo flush\n",
- _ep->name, DIR_STRING(ep));
-
- /* flush endpoint buffer */
- if (ep->ep_num == 0)
- flush_bit = (1 << 16) | 1;
- else if (is_in(ep))
- flush_bit = 1 << (ep->ep_num + 16); /* TX */
- else
- flush_bit = 1 << ep->ep_num; /* RX */
-
- /* wait until flush complete */
- timeout = jiffies + FLUSH_TIMEOUT;
- do {
- writel(flush_bit, &dev->op_regs->endptflush);
- while (readl(&dev->op_regs->endptflush)) {
- if (time_after(jiffies, timeout)) {
- dev_err(&dev->pdev->dev, "ep flush timeout\n");
- goto done;
- }
- cpu_relax();
- }
- } while (readl(&dev->op_regs->endptstat) & flush_bit);
-done:
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* endpoints operations structure */
-static const struct usb_ep_ops langwell_ep_ops = {
-
- /* configure endpoint, making it usable */
- .enable = langwell_ep_enable,
-
- /* endpoint is no longer usable */
- .disable = langwell_ep_disable,
-
- /* allocate a request object to use with this endpoint */
- .alloc_request = langwell_alloc_request,
-
- /* free a request object */
- .free_request = langwell_free_request,
-
- /* queue (submits) an I/O requests to an endpoint */
- .queue = langwell_ep_queue,
-
- /* dequeue (cancels, unlinks) an I/O request from an endpoint */
- .dequeue = langwell_ep_dequeue,
-
- /* set the endpoint halt feature */
- .set_halt = langwell_ep_set_halt,
-
- /* set the halt feature and ignores clear requests */
- .set_wedge = langwell_ep_set_wedge,
-
- /* flush contents of a fifo */
- .fifo_flush = langwell_ep_fifo_flush,
-};
-
-
-/*-------------------------------------------------------------------------*/
-
-/* device controller usb_gadget_ops structure */
-
-/* returns the current frame number */
-static int langwell_get_frame(struct usb_gadget *_gadget)
-{
- struct langwell_udc *dev;
- u16 retval;
-
- if (!_gadget)
- return -ENODEV;
-
- dev = container_of(_gadget, struct langwell_udc, gadget);
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- retval = readl(&dev->op_regs->frindex) & FRINDEX_MASK;
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return retval;
-}
-
-
-/* enter or exit PHY low power state */
-static void langwell_phy_low_power(struct langwell_udc *dev, bool flag)
-{
- u32 devlc;
- u8 devlc_byte2;
- dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- devlc = readl(&dev->op_regs->devlc);
- dev_vdbg(&dev->pdev->dev, "devlc = 0x%08x\n", devlc);
-
- if (flag)
- devlc |= LPM_PHCD;
- else
- devlc &= ~LPM_PHCD;
-
- /* FIXME: workaround for Langwell A1/A2/A3 sighting */
- devlc_byte2 = (devlc >> 16) & 0xff;
- writeb(devlc_byte2, (u8 *)&dev->op_regs->devlc + 2);
-
- devlc = readl(&dev->op_regs->devlc);
- dev_vdbg(&dev->pdev->dev,
- "%s PHY low power suspend, devlc = 0x%08x\n",
- flag ? "enter" : "exit", devlc);
-}
-
-
-/* tries to wake up the host connected to this gadget */
-static int langwell_wakeup(struct usb_gadget *_gadget)
-{
- struct langwell_udc *dev;
- u32 portsc1;
- unsigned long flags;
-
- if (!_gadget)
- return 0;
-
- dev = container_of(_gadget, struct langwell_udc, gadget);
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- /* remote wakeup feature not enabled by host */
- if (!dev->remote_wakeup) {
- dev_info(&dev->pdev->dev, "remote wakeup is disabled\n");
- return -ENOTSUPP;
- }
-
- spin_lock_irqsave(&dev->lock, flags);
-
- portsc1 = readl(&dev->op_regs->portsc1);
- if (!(portsc1 & PORTS_SUSP)) {
- spin_unlock_irqrestore(&dev->lock, flags);
- return 0;
- }
-
- /* LPM L1 to L0 or legacy remote wakeup */
- if (dev->lpm && dev->lpm_state == LPM_L1)
- dev_info(&dev->pdev->dev, "LPM L1 to L0 remote wakeup\n");
- else
- dev_info(&dev->pdev->dev, "device remote wakeup\n");
-
- /* exit PHY low power suspend */
- if (dev->pdev->device != 0x0829)
- langwell_phy_low_power(dev, 0);
-
- /* force port resume */
- portsc1 |= PORTS_FPR;
- writel(portsc1, &dev->op_regs->portsc1);
-
- spin_unlock_irqrestore(&dev->lock, flags);
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return 0;
-}
-
-
-/* notify controller that VBUS is powered or not */
-static int langwell_vbus_session(struct usb_gadget *_gadget, int is_active)
-{
- struct langwell_udc *dev;
- unsigned long flags;
- u32 usbcmd;
-
- if (!_gadget)
- return -ENODEV;
-
- dev = container_of(_gadget, struct langwell_udc, gadget);
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- spin_lock_irqsave(&dev->lock, flags);
- dev_vdbg(&dev->pdev->dev, "VBUS status: %s\n",
- is_active ? "on" : "off");
-
- dev->vbus_active = (is_active != 0);
- if (dev->driver && dev->softconnected && dev->vbus_active) {
- usbcmd = readl(&dev->op_regs->usbcmd);
- usbcmd |= CMD_RUNSTOP;
- writel(usbcmd, &dev->op_regs->usbcmd);
- } else {
- usbcmd = readl(&dev->op_regs->usbcmd);
- usbcmd &= ~CMD_RUNSTOP;
- writel(usbcmd, &dev->op_regs->usbcmd);
- }
-
- spin_unlock_irqrestore(&dev->lock, flags);
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return 0;
-}
-
-
-/* constrain controller's VBUS power usage */
-static int langwell_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
-{
- struct langwell_udc *dev;
-
- if (!_gadget)
- return -ENODEV;
-
- dev = container_of(_gadget, struct langwell_udc, gadget);
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- if (dev->transceiver) {
- dev_vdbg(&dev->pdev->dev, "usb_phy_set_power\n");
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return usb_phy_set_power(dev->transceiver, mA);
- }
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return -ENOTSUPP;
-}
-
-
-/* D+ pullup, software-controlled connect/disconnect to USB host */
-static int langwell_pullup(struct usb_gadget *_gadget, int is_on)
-{
- struct langwell_udc *dev;
- u32 usbcmd;
- unsigned long flags;
-
- if (!_gadget)
- return -ENODEV;
-
- dev = container_of(_gadget, struct langwell_udc, gadget);
-
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- spin_lock_irqsave(&dev->lock, flags);
- dev->softconnected = (is_on != 0);
-
- if (dev->driver && dev->softconnected && dev->vbus_active) {
- usbcmd = readl(&dev->op_regs->usbcmd);
- usbcmd |= CMD_RUNSTOP;
- writel(usbcmd, &dev->op_regs->usbcmd);
- } else {
- usbcmd = readl(&dev->op_regs->usbcmd);
- usbcmd &= ~CMD_RUNSTOP;
- writel(usbcmd, &dev->op_regs->usbcmd);
- }
- spin_unlock_irqrestore(&dev->lock, flags);
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return 0;
-}
-
-static int langwell_start(struct usb_gadget *g,
- struct usb_gadget_driver *driver);
-
-static int langwell_stop(struct usb_gadget *g,
- struct usb_gadget_driver *driver);
-
-/* device controller usb_gadget_ops structure */
-static const struct usb_gadget_ops langwell_ops = {
-
- /* returns the current frame number */
- .get_frame = langwell_get_frame,
-
- /* tries to wake up the host connected to this gadget */
- .wakeup = langwell_wakeup,
-
- /* set the device selfpowered feature, always selfpowered */
- /* .set_selfpowered = langwell_set_selfpowered, */
-
- /* notify controller that VBUS is powered or not */
- .vbus_session = langwell_vbus_session,
-
- /* constrain controller's VBUS power usage */
- .vbus_draw = langwell_vbus_draw,
-
- /* D+ pullup, software-controlled connect/disconnect to USB host */
- .pullup = langwell_pullup,
-
- .udc_start = langwell_start,
- .udc_stop = langwell_stop,
-};
-
-
-/*-------------------------------------------------------------------------*/
-
-/* device controller operations */
-
-/* reset device controller */
-static int langwell_udc_reset(struct langwell_udc *dev)
-{
- u32 usbcmd, usbmode, devlc, endpointlistaddr;
- u8 devlc_byte0, devlc_byte2;
- unsigned long timeout;
-
- if (!dev)
- return -EINVAL;
-
- dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- /* set controller to stop state */
- usbcmd = readl(&dev->op_regs->usbcmd);
- usbcmd &= ~CMD_RUNSTOP;
- writel(usbcmd, &dev->op_regs->usbcmd);
-
- /* reset device controller */
- usbcmd = readl(&dev->op_regs->usbcmd);
- usbcmd |= CMD_RST;
- writel(usbcmd, &dev->op_regs->usbcmd);
-
- /* wait for reset to complete */
- timeout = jiffies + RESET_TIMEOUT;
- while (readl(&dev->op_regs->usbcmd) & CMD_RST) {
- if (time_after(jiffies, timeout)) {
- dev_err(&dev->pdev->dev, "device reset timeout\n");
- return -ETIMEDOUT;
- }
- cpu_relax();
- }
-
- /* set controller to device mode */
- usbmode = readl(&dev->op_regs->usbmode);
- usbmode |= MODE_DEVICE;
-
- /* turn setup lockout off, require setup tripwire in usbcmd */
- usbmode |= MODE_SLOM;
-
- writel(usbmode, &dev->op_regs->usbmode);
- usbmode = readl(&dev->op_regs->usbmode);
- dev_vdbg(&dev->pdev->dev, "usbmode=0x%08x\n", usbmode);
-
- /* Write-Clear setup status */
- writel(0, &dev->op_regs->usbsts);
-
- /* if support USB LPM, ACK all LPM token */
- if (dev->lpm) {
- devlc = readl(&dev->op_regs->devlc);
- dev_vdbg(&dev->pdev->dev, "devlc = 0x%08x\n", devlc);
- /* FIXME: workaround for Langwell A1/A2/A3 sighting */
- devlc &= ~LPM_STL; /* don't STALL LPM token */
- devlc &= ~LPM_NYT_ACK; /* ACK LPM token */
- devlc_byte0 = devlc & 0xff;
- devlc_byte2 = (devlc >> 16) & 0xff;
- writeb(devlc_byte0, (u8 *)&dev->op_regs->devlc);
- writeb(devlc_byte2, (u8 *)&dev->op_regs->devlc + 2);
- devlc = readl(&dev->op_regs->devlc);
- dev_vdbg(&dev->pdev->dev,
- "ACK LPM token, devlc = 0x%08x\n", devlc);
- }
-
- /* fill endpointlistaddr register */
- endpointlistaddr = dev->ep_dqh_dma;
- endpointlistaddr &= ENDPOINTLISTADDR_MASK;
- writel(endpointlistaddr, &dev->op_regs->endpointlistaddr);
-
- dev_vdbg(&dev->pdev->dev,
- "dQH base (vir: %p, phy: 0x%08x), endpointlistaddr=0x%08x\n",
- dev->ep_dqh, endpointlistaddr,
- readl(&dev->op_regs->endpointlistaddr));
- dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return 0;
-}
-
-
-/* reinitialize device controller endpoints */
-static int eps_reinit(struct langwell_udc *dev)
-{
- struct langwell_ep *ep;
- char name[14];
- int i;
-
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- /* initialize ep0 */
- ep = &dev->ep[0];
- ep->dev = dev;
- strncpy(ep->name, "ep0", sizeof(ep->name));
- ep->ep.name = ep->name;
- ep->ep.ops = &langwell_ep_ops;
- ep->stopped = 0;
- ep->ep.maxpacket = EP0_MAX_PKT_SIZE;
- ep->ep_num = 0;
- ep->ep.desc = &langwell_ep0_desc;
- INIT_LIST_HEAD(&ep->queue);
-
- ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
-
- /* initialize other endpoints */
- for (i = 2; i < dev->ep_max; i++) {
- ep = &dev->ep[i];
- if (i % 2)
- snprintf(name, sizeof(name), "ep%din", i / 2);
- else
- snprintf(name, sizeof(name), "ep%dout", i / 2);
- ep->dev = dev;
- strncpy(ep->name, name, sizeof(ep->name));
- ep->ep.name = ep->name;
-
- ep->ep.ops = &langwell_ep_ops;
- ep->stopped = 0;
- ep->ep.maxpacket = (unsigned short) ~0;
- ep->ep_num = i / 2;
-
- INIT_LIST_HEAD(&ep->queue);
- list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
- }
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return 0;
-}
-
-
-/* enable interrupt and set controller to run state */
-static void langwell_udc_start(struct langwell_udc *dev)
-{
- u32 usbintr, usbcmd;
- dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- /* enable interrupts */
- usbintr = INTR_ULPIE /* ULPI */
- | INTR_SLE /* suspend */
- /* | INTR_SRE SOF received */
- | INTR_URE /* USB reset */
- | INTR_AAE /* async advance */
- | INTR_SEE /* system error */
- | INTR_FRE /* frame list rollover */
- | INTR_PCE /* port change detect */
- | INTR_UEE /* USB error interrupt */
- | INTR_UE; /* USB interrupt */
- writel(usbintr, &dev->op_regs->usbintr);
-
- /* clear stopped bit */
- dev->stopped = 0;
-
- /* set controller to run */
- usbcmd = readl(&dev->op_regs->usbcmd);
- usbcmd |= CMD_RUNSTOP;
- writel(usbcmd, &dev->op_regs->usbcmd);
-
- dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* disable interrupt and set controller to stop state */
-static void langwell_udc_stop(struct langwell_udc *dev)
-{
- u32 usbcmd;
-
- dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- /* disable all interrupts */
- writel(0, &dev->op_regs->usbintr);
-
- /* set stopped bit */
- dev->stopped = 1;
-
- /* set controller to stop state */
- usbcmd = readl(&dev->op_regs->usbcmd);
- usbcmd &= ~CMD_RUNSTOP;
- writel(usbcmd, &dev->op_regs->usbcmd);
-
- dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* stop all USB activities */
-static void stop_activity(struct langwell_udc *dev)
-{
- struct langwell_ep *ep;
- dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- nuke(&dev->ep[0], -ESHUTDOWN);
-
- list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
- nuke(ep, -ESHUTDOWN);
- }
-
- /* report disconnect; the driver is already quiesced */
- if (dev->driver) {
- spin_unlock(&dev->lock);
- dev->driver->disconnect(&dev->gadget);
- spin_lock(&dev->lock);
- }
-
- dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* device "function" sysfs attribute file */
-static ssize_t show_function(struct device *_dev,
- struct device_attribute *attr, char *buf)
-{
- struct langwell_udc *dev = dev_get_drvdata(_dev);
-
- if (!dev->driver || !dev->driver->function
- || strlen(dev->driver->function) > PAGE_SIZE)
- return 0;
-
- return scnprintf(buf, PAGE_SIZE, "%s\n", dev->driver->function);
-}
-static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
-
-
-static inline enum usb_device_speed lpm_device_speed(u32 reg)
-{
- switch (LPM_PSPD(reg)) {
- case LPM_SPEED_HIGH:
- return USB_SPEED_HIGH;
- case LPM_SPEED_FULL:
- return USB_SPEED_FULL;
- case LPM_SPEED_LOW:
- return USB_SPEED_LOW;
- default:
- return USB_SPEED_UNKNOWN;
- }
-}
-
-/* device "langwell_udc" sysfs attribute file */
-static ssize_t show_langwell_udc(struct device *_dev,
- struct device_attribute *attr, char *buf)
-{
- struct langwell_udc *dev = dev_get_drvdata(_dev);
- struct langwell_request *req;
- struct langwell_ep *ep = NULL;
- char *next;
- unsigned size;
- unsigned t;
- unsigned i;
- unsigned long flags;
- u32 tmp_reg;
-
- next = buf;
- size = PAGE_SIZE;
- spin_lock_irqsave(&dev->lock, flags);
-
- /* driver basic information */
- t = scnprintf(next, size,
- DRIVER_DESC "\n"
- "%s version: %s\n"
- "Gadget driver: %s\n\n",
- driver_name, DRIVER_VERSION,
- dev->driver ? dev->driver->driver.name : "(none)");
- size -= t;
- next += t;
-
- /* device registers */
- tmp_reg = readl(&dev->op_regs->usbcmd);
- t = scnprintf(next, size,
- "USBCMD reg:\n"
- "SetupTW: %d\n"
- "Run/Stop: %s\n\n",
- (tmp_reg & CMD_SUTW) ? 1 : 0,
- (tmp_reg & CMD_RUNSTOP) ? "Run" : "Stop");
- size -= t;
- next += t;
-
- tmp_reg = readl(&dev->op_regs->usbsts);
- t = scnprintf(next, size,
- "USB Status Reg:\n"
- "Device Suspend: %d\n"
- "Reset Received: %d\n"
- "System Error: %s\n"
- "USB Error Interrupt: %s\n\n",
- (tmp_reg & STS_SLI) ? 1 : 0,
- (tmp_reg & STS_URI) ? 1 : 0,
- (tmp_reg & STS_SEI) ? "Error" : "No error",
- (tmp_reg & STS_UEI) ? "Error detected" : "No error");
- size -= t;
- next += t;
-
- tmp_reg = readl(&dev->op_regs->usbintr);
- t = scnprintf(next, size,
- "USB Intrrupt Enable Reg:\n"
- "Sleep Enable: %d\n"
- "SOF Received Enable: %d\n"
- "Reset Enable: %d\n"
- "System Error Enable: %d\n"
- "Port Change Dectected Enable: %d\n"
- "USB Error Intr Enable: %d\n"
- "USB Intr Enable: %d\n\n",
- (tmp_reg & INTR_SLE) ? 1 : 0,
- (tmp_reg & INTR_SRE) ? 1 : 0,
- (tmp_reg & INTR_URE) ? 1 : 0,
- (tmp_reg & INTR_SEE) ? 1 : 0,
- (tmp_reg & INTR_PCE) ? 1 : 0,
- (tmp_reg & INTR_UEE) ? 1 : 0,
- (tmp_reg & INTR_UE) ? 1 : 0);
- size -= t;
- next += t;
-
- tmp_reg = readl(&dev->op_regs->frindex);
- t = scnprintf(next, size,
- "USB Frame Index Reg:\n"
- "Frame Number is 0x%08x\n\n",
- (tmp_reg & FRINDEX_MASK));
- size -= t;
- next += t;
-
- tmp_reg = readl(&dev->op_regs->deviceaddr);
- t = scnprintf(next, size,
- "USB Device Address Reg:\n"
- "Device Addr is 0x%x\n\n",
- USBADR(tmp_reg));
- size -= t;
- next += t;
-
- tmp_reg = readl(&dev->op_regs->endpointlistaddr);
- t = scnprintf(next, size,
- "USB Endpoint List Address Reg:\n"
- "Endpoint List Pointer is 0x%x\n\n",
- EPBASE(tmp_reg));
- size -= t;
- next += t;
-
- tmp_reg = readl(&dev->op_regs->portsc1);
- t = scnprintf(next, size,
- "USB Port Status & Control Reg:\n"
- "Port Reset: %s\n"
- "Port Suspend Mode: %s\n"
- "Over-current Change: %s\n"
- "Port Enable/Disable Change: %s\n"
- "Port Enabled/Disabled: %s\n"
- "Current Connect Status: %s\n"
- "LPM Suspend Status: %s\n\n",
- (tmp_reg & PORTS_PR) ? "Reset" : "Not Reset",
- (tmp_reg & PORTS_SUSP) ? "Suspend " : "Not Suspend",
- (tmp_reg & PORTS_OCC) ? "Detected" : "No",
- (tmp_reg & PORTS_PEC) ? "Changed" : "Not Changed",
- (tmp_reg & PORTS_PE) ? "Enable" : "Not Correct",
- (tmp_reg & PORTS_CCS) ? "Attached" : "Not Attached",
- (tmp_reg & PORTS_SLP) ? "LPM L1" : "LPM L0");
- size -= t;
- next += t;
-
- tmp_reg = readl(&dev->op_regs->devlc);
- t = scnprintf(next, size,
- "Device LPM Control Reg:\n"
- "Parallel Transceiver : %d\n"
- "Serial Transceiver : %d\n"
- "Port Speed: %s\n"
- "Port Force Full Speed Connenct: %s\n"
- "PHY Low Power Suspend Clock: %s\n"
- "BmAttributes: %d\n\n",
- LPM_PTS(tmp_reg),
- (tmp_reg & LPM_STS) ? 1 : 0,
- usb_speed_string(lpm_device_speed(tmp_reg)),
- (tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force",
- (tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled",
- LPM_BA(tmp_reg));
- size -= t;
- next += t;
-
- tmp_reg = readl(&dev->op_regs->usbmode);
- t = scnprintf(next, size,
- "USB Mode Reg:\n"
- "Controller Mode is : %s\n\n", ({
- char *s;
- switch (MODE_CM(tmp_reg)) {
- case MODE_IDLE:
- s = "Idle"; break;
- case MODE_DEVICE:
- s = "Device Controller"; break;
- case MODE_HOST:
- s = "Host Controller"; break;
- default:
- s = "None"; break;
- }
- s;
- }));
- size -= t;
- next += t;
-
- tmp_reg = readl(&dev->op_regs->endptsetupstat);
- t = scnprintf(next, size,
- "Endpoint Setup Status Reg:\n"
- "SETUP on ep 0x%04x\n\n",
- tmp_reg & SETUPSTAT_MASK);
- size -= t;
- next += t;
-
- for (i = 0; i < dev->ep_max / 2; i++) {
- tmp_reg = readl(&dev->op_regs->endptctrl[i]);
- t = scnprintf(next, size, "EP Ctrl Reg [%d]: 0x%08x\n",
- i, tmp_reg);
- size -= t;
- next += t;
- }
- tmp_reg = readl(&dev->op_regs->endptprime);
- t = scnprintf(next, size, "EP Prime Reg: 0x%08x\n\n", tmp_reg);
- size -= t;
- next += t;
-
- /* langwell_udc, langwell_ep, langwell_request structure information */
- ep = &dev->ep[0];
- t = scnprintf(next, size, "%s MaxPacketSize: 0x%x, ep_num: %d\n",
- ep->ep.name, ep->ep.maxpacket, ep->ep_num);
- size -= t;
- next += t;
-
- if (list_empty(&ep->queue)) {
- t = scnprintf(next, size, "its req queue is empty\n\n");
- size -= t;
- next += t;
- } else {
- list_for_each_entry(req, &ep->queue, queue) {
- t = scnprintf(next, size,
- "req %p actual 0x%x length 0x%x buf %p\n",
- &req->req, req->req.actual,
- req->req.length, req->req.buf);
- size -= t;
- next += t;
- }
- }
- /* other gadget->eplist ep */
- list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
- if (ep->ep.desc) {
- t = scnprintf(next, size,
- "\n%s MaxPacketSize: 0x%x, "
- "ep_num: %d\n",
- ep->ep.name, ep->ep.maxpacket,
- ep->ep_num);
- size -= t;
- next += t;
-
- if (list_empty(&ep->queue)) {
- t = scnprintf(next, size,
- "its req queue is empty\n\n");
- size -= t;
- next += t;
- } else {
- list_for_each_entry(req, &ep->queue, queue) {
- t = scnprintf(next, size,
- "req %p actual 0x%x length "
- "0x%x buf %p\n",
- &req->req, req->req.actual,
- req->req.length, req->req.buf);
- size -= t;
- next += t;
- }
- }
- }
- }
-
- spin_unlock_irqrestore(&dev->lock, flags);
- return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(langwell_udc, S_IRUGO, show_langwell_udc, NULL);
-
-
-/* device "remote_wakeup" sysfs attribute file */
-static ssize_t store_remote_wakeup(struct device *_dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- struct langwell_udc *dev = dev_get_drvdata(_dev);
- unsigned long flags;
- ssize_t rc = count;
-
- if (count > 2)
- return -EINVAL;
-
- if (count > 0 && buf[count-1] == '\n')
- ((char *) buf)[count-1] = 0;
-
- if (buf[0] != '1')
- return -EINVAL;
-
- /* force remote wakeup enabled in case gadget driver doesn't support */
- spin_lock_irqsave(&dev->lock, flags);
- dev->remote_wakeup = 1;
- dev->dev_status |= (1 << USB_DEVICE_REMOTE_WAKEUP);
- spin_unlock_irqrestore(&dev->lock, flags);
-
- langwell_wakeup(&dev->gadget);
-
- return rc;
-}
-static DEVICE_ATTR(remote_wakeup, S_IWUSR, NULL, store_remote_wakeup);
-
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * when a driver is successfully registered, it will receive
- * control requests including set_configuration(), which enables
- * non-control requests. then usb traffic follows until a
- * disconnect is reported. then a host may connect again, or
- * the driver might get unbound.
- */
-
-static int langwell_start(struct usb_gadget *g,
- struct usb_gadget_driver *driver)
-{
- struct langwell_udc *dev = gadget_to_langwell(g);
- unsigned long flags;
- int retval;
-
- dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- spin_lock_irqsave(&dev->lock, flags);
-
- /* hook up the driver ... */
- driver->driver.bus = NULL;
- dev->driver = driver;
- dev->gadget.dev.driver = &driver->driver;
-
- spin_unlock_irqrestore(&dev->lock, flags);
-
- retval = device_create_file(&dev->pdev->dev, &dev_attr_function);
- if (retval)
- goto err;
-
- dev->usb_state = USB_STATE_ATTACHED;
- dev->ep0_state = WAIT_FOR_SETUP;
- dev->ep0_dir = USB_DIR_OUT;
-
- /* enable interrupt and set controller to run state */
- if (dev->got_irq)
- langwell_udc_start(dev);
-
- dev_vdbg(&dev->pdev->dev,
- "After langwell_udc_start(), print all registers:\n");
- print_all_registers(dev);
-
- dev_info(&dev->pdev->dev, "register driver: %s\n",
- driver->driver.name);
- dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
- return 0;
-
-err:
- dev->gadget.dev.driver = NULL;
- dev->driver = NULL;
-
- dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
- return retval;
-}
-
-/* unregister gadget driver */
-static int langwell_stop(struct usb_gadget *g,
- struct usb_gadget_driver *driver)
-{
- struct langwell_udc *dev = gadget_to_langwell(g);
- unsigned long flags;
-
- dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- /* exit PHY low power suspend */
- if (dev->pdev->device != 0x0829)
- langwell_phy_low_power(dev, 0);
-
- /* unbind OTG transceiver */
- if (dev->transceiver)
- (void)otg_set_peripheral(dev->transceiver->otg, 0);
-
- /* disable interrupt and set controller to stop state */
- langwell_udc_stop(dev);
-
- dev->usb_state = USB_STATE_ATTACHED;
- dev->ep0_state = WAIT_FOR_SETUP;
- dev->ep0_dir = USB_DIR_OUT;
-
- spin_lock_irqsave(&dev->lock, flags);
-
- /* stop all usb activities */
- dev->gadget.speed = USB_SPEED_UNKNOWN;
- dev->gadget.dev.driver = NULL;
- dev->driver = NULL;
- stop_activity(dev);
- spin_unlock_irqrestore(&dev->lock, flags);
-
- device_remove_file(&dev->pdev->dev, &dev_attr_function);
-
- dev_info(&dev->pdev->dev, "unregistered driver '%s'\n",
- driver->driver.name);
- dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * setup tripwire is used as a semaphore to ensure that the setup data
- * payload is extracted from a dQH without being corrupted
- */
-static void setup_tripwire(struct langwell_udc *dev)
-{
- u32 usbcmd,
- endptsetupstat;
- unsigned long timeout;
- struct langwell_dqh *dqh;
-
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- /* ep0 OUT dQH */
- dqh = &dev->ep_dqh[EP_DIR_OUT];
-
- /* Write-Clear endptsetupstat */
- endptsetupstat = readl(&dev->op_regs->endptsetupstat);
- writel(endptsetupstat, &dev->op_regs->endptsetupstat);
-
- /* wait until endptsetupstat is cleared */
- timeout = jiffies + SETUPSTAT_TIMEOUT;
- while (readl(&dev->op_regs->endptsetupstat)) {
- if (time_after(jiffies, timeout)) {
- dev_err(&dev->pdev->dev, "setup_tripwire timeout\n");
- break;
- }
- cpu_relax();
- }
-
- /* while a hazard exists when setup packet arrives */
- do {
- /* set setup tripwire bit */
- usbcmd = readl(&dev->op_regs->usbcmd);
- writel(usbcmd | CMD_SUTW, &dev->op_regs->usbcmd);
-
- /* copy the setup packet to local buffer */
- memcpy(&dev->local_setup_buff, &dqh->dqh_setup, 8);
- } while (!(readl(&dev->op_regs->usbcmd) & CMD_SUTW));
-
- /* Write-Clear setup tripwire bit */
- usbcmd = readl(&dev->op_regs->usbcmd);
- writel(usbcmd & ~CMD_SUTW, &dev->op_regs->usbcmd);
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* protocol ep0 stall, will automatically be cleared on new transaction */
-static void ep0_stall(struct langwell_udc *dev)
-{
- u32 endptctrl;
-
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- /* set TX and RX to stall */
- endptctrl = readl(&dev->op_regs->endptctrl[0]);
- endptctrl |= EPCTRL_TXS | EPCTRL_RXS;
- writel(endptctrl, &dev->op_regs->endptctrl[0]);
-
- /* update ep0 state */
- dev->ep0_state = WAIT_FOR_SETUP;
- dev->ep0_dir = USB_DIR_OUT;
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* PRIME a status phase for ep0 */
-static int prime_status_phase(struct langwell_udc *dev, int dir)
-{
- struct langwell_request *req;
- struct langwell_ep *ep;
- int status = 0;
-
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- if (dir == EP_DIR_IN)
- dev->ep0_dir = USB_DIR_IN;
- else
- dev->ep0_dir = USB_DIR_OUT;
-
- ep = &dev->ep[0];
- dev->ep0_state = WAIT_FOR_OUT_STATUS;
-
- req = dev->status_req;
-
- req->ep = ep;
- req->req.length = 0;
- req->req.status = -EINPROGRESS;
- req->req.actual = 0;
- req->req.complete = NULL;
- req->dtd_count = 0;
-
- if (!req_to_dtd(req))
- status = queue_dtd(ep, req);
- else
- return -ENOMEM;
-
- if (status)
- dev_err(&dev->pdev->dev, "can't queue ep0 status request\n");
-
- list_add_tail(&req->queue, &ep->queue);
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return status;
-}
-
-
-/* SET_ADDRESS request routine */
-static void set_address(struct langwell_udc *dev, u16 value,
- u16 index, u16 length)
-{
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- /* save the new address to device struct */
- dev->dev_addr = (u8) value;
- dev_vdbg(&dev->pdev->dev, "dev->dev_addr = %d\n", dev->dev_addr);
-
- /* update usb state */
- dev->usb_state = USB_STATE_ADDRESS;
-
- /* STATUS phase */
- if (prime_status_phase(dev, EP_DIR_IN))
- ep0_stall(dev);
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* return endpoint by windex */
-static struct langwell_ep *get_ep_by_windex(struct langwell_udc *dev,
- u16 wIndex)
-{
- struct langwell_ep *ep;
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
- return &dev->ep[0];
-
- list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
- u8 bEndpointAddress;
- if (!ep->ep.desc)
- continue;
-
- bEndpointAddress = ep->ep.desc->bEndpointAddress;
- if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
- continue;
-
- if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
- == (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
- return ep;
- }
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return NULL;
-}
-
-
-/* return whether endpoint is stalled, 0: not stalled; 1: stalled */
-static int ep_is_stall(struct langwell_ep *ep)
-{
- struct langwell_udc *dev = ep->dev;
- u32 endptctrl;
- int retval;
-
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- endptctrl = readl(&dev->op_regs->endptctrl[ep->ep_num]);
- if (is_in(ep))
- retval = endptctrl & EPCTRL_TXS ? 1 : 0;
- else
- retval = endptctrl & EPCTRL_RXS ? 1 : 0;
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return retval;
-}
-
-
-/* GET_STATUS request routine */
-static void get_status(struct langwell_udc *dev, u8 request_type, u16 value,
- u16 index, u16 length)
-{
- struct langwell_request *req;
- struct langwell_ep *ep;
- u16 status_data = 0; /* 16 bits cpu view status data */
- int status = 0;
-
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- ep = &dev->ep[0];
-
- if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
- /* get device status */
- status_data = dev->dev_status;
- } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
- /* get interface status */
- status_data = 0;
- } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
- /* get endpoint status */
- struct langwell_ep *epn;
- epn = get_ep_by_windex(dev, index);
- /* stall if endpoint doesn't exist */
- if (!epn)
- goto stall;
-
- status_data = ep_is_stall(epn) << USB_ENDPOINT_HALT;
- }
-
- dev_dbg(&dev->pdev->dev, "get status data: 0x%04x\n", status_data);
-
- dev->ep0_dir = USB_DIR_IN;
-
- /* borrow the per device status_req */
- req = dev->status_req;
-
- /* fill in the reqest structure */
- *((u16 *) req->req.buf) = cpu_to_le16(status_data);
- req->ep = ep;
- req->req.length = 2;
- req->req.status = -EINPROGRESS;
- req->req.actual = 0;
- req->req.complete = NULL;
- req->dtd_count = 0;
-
- /* prime the data phase */
- if (!req_to_dtd(req))
- status = queue_dtd(ep, req);
- else /* no mem */
- goto stall;
-
- if (status) {
- dev_err(&dev->pdev->dev,
- "response error on GET_STATUS request\n");
- goto stall;
- }
-
- list_add_tail(&req->queue, &ep->queue);
- dev->ep0_state = DATA_STATE_XMIT;
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return;
-stall:
- ep0_stall(dev);
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* setup packet interrupt handler */
-static void handle_setup_packet(struct langwell_udc *dev,
- struct usb_ctrlrequest *setup)
-{
- u16 wValue = le16_to_cpu(setup->wValue);
- u16 wIndex = le16_to_cpu(setup->wIndex);
- u16 wLength = le16_to_cpu(setup->wLength);
- u32 portsc1;
-
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- /* ep0 fifo flush */
- nuke(&dev->ep[0], -ESHUTDOWN);
-
- dev_dbg(&dev->pdev->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
- setup->bRequestType, setup->bRequest,
- wValue, wIndex, wLength);
-
- /* RNDIS gadget delegate */
- if ((setup->bRequestType == 0x21) && (setup->bRequest == 0x00)) {
- /* USB_CDC_SEND_ENCAPSULATED_COMMAND */
- goto delegate;
- }
-
- /* USB_CDC_GET_ENCAPSULATED_RESPONSE */
- if ((setup->bRequestType == 0xa1) && (setup->bRequest == 0x01)) {
- /* USB_CDC_GET_ENCAPSULATED_RESPONSE */
- goto delegate;
- }
-
- /* We process some stardard setup requests here */
- switch (setup->bRequest) {
- case USB_REQ_GET_STATUS:
- dev_dbg(&dev->pdev->dev, "SETUP: USB_REQ_GET_STATUS\n");
- /* get status, DATA and STATUS phase */
- if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
- != (USB_DIR_IN | USB_TYPE_STANDARD))
- break;
- get_status(dev, setup->bRequestType, wValue, wIndex, wLength);
- goto end;
-
- case USB_REQ_SET_ADDRESS:
- dev_dbg(&dev->pdev->dev, "SETUP: USB_REQ_SET_ADDRESS\n");
- /* STATUS phase */
- if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD
- | USB_RECIP_DEVICE))
- break;
- set_address(dev, wValue, wIndex, wLength);
- goto end;
-
- case USB_REQ_CLEAR_FEATURE:
- case USB_REQ_SET_FEATURE:
- /* STATUS phase */
- {
- int rc = -EOPNOTSUPP;
- if (setup->bRequest == USB_REQ_SET_FEATURE)
- dev_dbg(&dev->pdev->dev,
- "SETUP: USB_REQ_SET_FEATURE\n");
- else if (setup->bRequest == USB_REQ_CLEAR_FEATURE)
- dev_dbg(&dev->pdev->dev,
- "SETUP: USB_REQ_CLEAR_FEATURE\n");
-
- if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK))
- == (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) {
- struct langwell_ep *epn;
- epn = get_ep_by_windex(dev, wIndex);
- /* stall if endpoint doesn't exist */
- if (!epn) {
- ep0_stall(dev);
- goto end;
- }
-
- if (wValue != 0 || wLength != 0
- || epn->ep_num > dev->ep_max)
- break;
-
- spin_unlock(&dev->lock);
- rc = langwell_ep_set_halt(&epn->ep,
- (setup->bRequest == USB_REQ_SET_FEATURE)
- ? 1 : 0);
- spin_lock(&dev->lock);
-
- } else if ((setup->bRequestType & (USB_RECIP_MASK
- | USB_TYPE_MASK)) == (USB_RECIP_DEVICE
- | USB_TYPE_STANDARD)) {
- rc = 0;
- switch (wValue) {
- case USB_DEVICE_REMOTE_WAKEUP:
- if (setup->bRequest == USB_REQ_SET_FEATURE) {
- dev->remote_wakeup = 1;
- dev->dev_status |= (1 << wValue);
- } else {
- dev->remote_wakeup = 0;
- dev->dev_status &= ~(1 << wValue);
- }
- break;
- case USB_DEVICE_TEST_MODE:
- dev_dbg(&dev->pdev->dev, "SETUP: TEST MODE\n");
- if ((wIndex & 0xff) ||
- (dev->gadget.speed != USB_SPEED_HIGH))
- ep0_stall(dev);
-
- switch (wIndex >> 8) {
- case TEST_J:
- case TEST_K:
- case TEST_SE0_NAK:
- case TEST_PACKET:
- case TEST_FORCE_EN:
- if (prime_status_phase(dev, EP_DIR_IN))
- ep0_stall(dev);
- portsc1 = readl(&dev->op_regs->portsc1);
- portsc1 |= (wIndex & 0xf00) << 8;
- writel(portsc1, &dev->op_regs->portsc1);
- goto end;
- default:
- rc = -EOPNOTSUPP;
- }
- break;
- default:
- rc = -EOPNOTSUPP;
- break;
- }
-
- if (!gadget_is_otg(&dev->gadget))
- break;
- else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE)
- dev->gadget.b_hnp_enable = 1;
- else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
- dev->gadget.a_hnp_support = 1;
- else if (setup->bRequest ==
- USB_DEVICE_A_ALT_HNP_SUPPORT)
- dev->gadget.a_alt_hnp_support = 1;
- else
- break;
- } else
- break;
-
- if (rc == 0) {
- if (prime_status_phase(dev, EP_DIR_IN))
- ep0_stall(dev);
- }
- goto end;
- }
-
- case USB_REQ_GET_DESCRIPTOR:
- dev_dbg(&dev->pdev->dev,
- "SETUP: USB_REQ_GET_DESCRIPTOR\n");
- goto delegate;
-
- case USB_REQ_SET_DESCRIPTOR:
- dev_dbg(&dev->pdev->dev,
- "SETUP: USB_REQ_SET_DESCRIPTOR unsupported\n");
- goto delegate;
-
- case USB_REQ_GET_CONFIGURATION:
- dev_dbg(&dev->pdev->dev,
- "SETUP: USB_REQ_GET_CONFIGURATION\n");
- goto delegate;
-
- case USB_REQ_SET_CONFIGURATION:
- dev_dbg(&dev->pdev->dev,
- "SETUP: USB_REQ_SET_CONFIGURATION\n");
- goto delegate;
-
- case USB_REQ_GET_INTERFACE:
- dev_dbg(&dev->pdev->dev,
- "SETUP: USB_REQ_GET_INTERFACE\n");
- goto delegate;
-
- case USB_REQ_SET_INTERFACE:
- dev_dbg(&dev->pdev->dev,
- "SETUP: USB_REQ_SET_INTERFACE\n");
- goto delegate;
-
- case USB_REQ_SYNCH_FRAME:
- dev_dbg(&dev->pdev->dev,
- "SETUP: USB_REQ_SYNCH_FRAME unsupported\n");
- goto delegate;
-
- default:
- /* delegate USB standard requests to the gadget driver */
- goto delegate;
-delegate:
- /* USB requests handled by gadget */
- if (wLength) {
- /* DATA phase from gadget, STATUS phase from udc */
- dev->ep0_dir = (setup->bRequestType & USB_DIR_IN)
- ? USB_DIR_IN : USB_DIR_OUT;
- dev_vdbg(&dev->pdev->dev,
- "dev->ep0_dir = 0x%x, wLength = %d\n",
- dev->ep0_dir, wLength);
- spin_unlock(&dev->lock);
- if (dev->driver->setup(&dev->gadget,
- &dev->local_setup_buff) < 0)
- ep0_stall(dev);
- spin_lock(&dev->lock);
- dev->ep0_state = (setup->bRequestType & USB_DIR_IN)
- ? DATA_STATE_XMIT : DATA_STATE_RECV;
- } else {
- /* no DATA phase, IN STATUS phase from gadget */
- dev->ep0_dir = USB_DIR_IN;
- dev_vdbg(&dev->pdev->dev,
- "dev->ep0_dir = 0x%x, wLength = %d\n",
- dev->ep0_dir, wLength);
- spin_unlock(&dev->lock);
- if (dev->driver->setup(&dev->gadget,
- &dev->local_setup_buff) < 0)
- ep0_stall(dev);
- spin_lock(&dev->lock);
- dev->ep0_state = WAIT_FOR_OUT_STATUS;
- }
- break;
- }
-end:
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* transfer completion, process endpoint request and free the completed dTDs
- * for this request
- */
-static int process_ep_req(struct langwell_udc *dev, int index,
- struct langwell_request *curr_req)
-{
- struct langwell_dtd *curr_dtd;
- struct langwell_dqh *curr_dqh;
- int td_complete, actual, remaining_length;
- int i, dir;
- u8 dtd_status = 0;
- int retval = 0;
-
- curr_dqh = &dev->ep_dqh[index];
- dir = index % 2;
-
- curr_dtd = curr_req->head;
- td_complete = 0;
- actual = curr_req->req.length;
-
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- for (i = 0; i < curr_req->dtd_count; i++) {
-
- /* command execution states by dTD */
- dtd_status = curr_dtd->dtd_status;
-
- barrier();
- remaining_length = le16_to_cpu(curr_dtd->dtd_total);
- actual -= remaining_length;
-
- if (!dtd_status) {
- /* transfers completed successfully */
- if (!remaining_length) {
- td_complete++;
- dev_vdbg(&dev->pdev->dev,
- "dTD transmitted successfully\n");
- } else {
- if (dir) {
- dev_vdbg(&dev->pdev->dev,
- "TX dTD remains data\n");
- retval = -EPROTO;
- break;
-
- } else {
- td_complete++;
- break;
- }
- }
- } else {
- /* transfers completed with errors */
- if (dtd_status & DTD_STS_ACTIVE) {
- dev_dbg(&dev->pdev->dev,
- "dTD status ACTIVE dQH[%d]\n", index);
- retval = 1;
- return retval;
- } else if (dtd_status & DTD_STS_HALTED) {
- dev_err(&dev->pdev->dev,
- "dTD error %08x dQH[%d]\n",
- dtd_status, index);
- /* clear the errors and halt condition */
- curr_dqh->dtd_status = 0;
- retval = -EPIPE;
- break;
- } else if (dtd_status & DTD_STS_DBE) {
- dev_dbg(&dev->pdev->dev,
- "data buffer (overflow) error\n");
- retval = -EPROTO;
- break;
- } else if (dtd_status & DTD_STS_TRE) {
- dev_dbg(&dev->pdev->dev,
- "transaction(ISO) error\n");
- retval = -EILSEQ;
- break;
- } else
- dev_err(&dev->pdev->dev,
- "unknown error (0x%x)!\n",
- dtd_status);
- }
-
- if (i != curr_req->dtd_count - 1)
- curr_dtd = (struct langwell_dtd *)
- curr_dtd->next_dtd_virt;
- }
-
- if (retval)
- return retval;
-
- curr_req->req.actual = actual;
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return 0;
-}
-
-
-/* complete DATA or STATUS phase of ep0 prime status phase if needed */
-static void ep0_req_complete(struct langwell_udc *dev,
- struct langwell_ep *ep0, struct langwell_request *req)
-{
- u32 new_addr;
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- if (dev->usb_state == USB_STATE_ADDRESS) {
- /* set the new address */
- new_addr = (u32)dev->dev_addr;
- writel(new_addr << USBADR_SHIFT, &dev->op_regs->deviceaddr);
-
- new_addr = USBADR(readl(&dev->op_regs->deviceaddr));
- dev_vdbg(&dev->pdev->dev, "new_addr = %d\n", new_addr);
- }
-
- done(ep0, req, 0);
-
- switch (dev->ep0_state) {
- case DATA_STATE_XMIT:
- /* receive status phase */
- if (prime_status_phase(dev, EP_DIR_OUT))
- ep0_stall(dev);
- break;
- case DATA_STATE_RECV:
- /* send status phase */
- if (prime_status_phase(dev, EP_DIR_IN))
- ep0_stall(dev);
- break;
- case WAIT_FOR_OUT_STATUS:
- dev->ep0_state = WAIT_FOR_SETUP;
- break;
- case WAIT_FOR_SETUP:
- dev_err(&dev->pdev->dev, "unexpect ep0 packets\n");
- break;
- default:
- ep0_stall(dev);
- break;
- }
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* USB transfer completion interrupt */
-static void handle_trans_complete(struct langwell_udc *dev)
-{
- u32 complete_bits;
- int i, ep_num, dir, bit_mask, status;
- struct langwell_ep *epn;
- struct langwell_request *curr_req, *temp_req;
-
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- complete_bits = readl(&dev->op_regs->endptcomplete);
- dev_vdbg(&dev->pdev->dev, "endptcomplete register: 0x%08x\n",
- complete_bits);
-
- /* Write-Clear the bits in endptcomplete register */
- writel(complete_bits, &dev->op_regs->endptcomplete);
-
- if (!complete_bits) {
- dev_dbg(&dev->pdev->dev, "complete_bits = 0\n");
- goto done;
- }
-
- for (i = 0; i < dev->ep_max; i++) {
- ep_num = i / 2;
- dir = i % 2;
-
- bit_mask = 1 << (ep_num + 16 * dir);
-
- if (!(complete_bits & bit_mask))
- continue;
-
- /* ep0 */
- if (i == 1)
- epn = &dev->ep[0];
- else
- epn = &dev->ep[i];
-
- if (epn->name == NULL) {
- dev_warn(&dev->pdev->dev, "invalid endpoint\n");
- continue;
- }
-
- if (i < 2)
- /* ep0 in and out */
- dev_dbg(&dev->pdev->dev, "%s-%s transfer completed\n",
- epn->name,
- is_in(epn) ? "in" : "out");
- else
- dev_dbg(&dev->pdev->dev, "%s transfer completed\n",
- epn->name);
-
- /* process the req queue until an uncomplete request */
- list_for_each_entry_safe(curr_req, temp_req,
- &epn->queue, queue) {
- status = process_ep_req(dev, i, curr_req);
- dev_vdbg(&dev->pdev->dev, "%s req status: %d\n",
- epn->name, status);
-
- if (status)
- break;
-
- /* write back status to req */
- curr_req->req.status = status;
-
- /* ep0 request completion */
- if (ep_num == 0) {
- ep0_req_complete(dev, epn, curr_req);
- break;
- } else {
- done(epn, curr_req, status);
- }
- }
- }
-done:
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-/* port change detect interrupt handler */
-static void handle_port_change(struct langwell_udc *dev)
-{
- u32 portsc1, devlc;
-
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- if (dev->bus_reset)
- dev->bus_reset = 0;
-
- portsc1 = readl(&dev->op_regs->portsc1);
- devlc = readl(&dev->op_regs->devlc);
- dev_vdbg(&dev->pdev->dev, "portsc1 = 0x%08x, devlc = 0x%08x\n",
- portsc1, devlc);
-
- /* bus reset is finished */
- if (!(portsc1 & PORTS_PR)) {
- /* get the speed */
- dev->gadget.speed = lpm_device_speed(devlc);
- dev_vdbg(&dev->pdev->dev, "dev->gadget.speed = %d\n",
- dev->gadget.speed);
- }
-
- /* LPM L0 to L1 */
- if (dev->lpm && dev->lpm_state == LPM_L0)
- if (portsc1 & PORTS_SUSP && portsc1 & PORTS_SLP) {
- dev_info(&dev->pdev->dev, "LPM L0 to L1\n");
- dev->lpm_state = LPM_L1;
- }
-
- /* LPM L1 to L0, force resume or remote wakeup finished */
- if (dev->lpm && dev->lpm_state == LPM_L1)
- if (!(portsc1 & PORTS_SUSP)) {
- dev_info(&dev->pdev->dev, "LPM L1 to L0\n");
- dev->lpm_state = LPM_L0;
- }
-
- /* update USB state */
- if (!dev->resume_state)
- dev->usb_state = USB_STATE_DEFAULT;
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* USB reset interrupt handler */
-static void handle_usb_reset(struct langwell_udc *dev)
-{
- u32 deviceaddr,
- endptsetupstat,
- endptcomplete;
- unsigned long timeout;
-
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- /* Write-Clear the device address */
- deviceaddr = readl(&dev->op_regs->deviceaddr);
- writel(deviceaddr & ~USBADR_MASK, &dev->op_regs->deviceaddr);
-
- dev->dev_addr = 0;
-
- /* clear usb state */
- dev->resume_state = 0;
-
- /* LPM L1 to L0, reset */
- if (dev->lpm)
- dev->lpm_state = LPM_L0;
-
- dev->ep0_dir = USB_DIR_OUT;
- dev->ep0_state = WAIT_FOR_SETUP;
-
- /* remote wakeup reset to 0 when the device is reset */
- dev->remote_wakeup = 0;
- dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
- dev->gadget.b_hnp_enable = 0;
- dev->gadget.a_hnp_support = 0;
- dev->gadget.a_alt_hnp_support = 0;
-
- /* Write-Clear all the setup token semaphores */
- endptsetupstat = readl(&dev->op_regs->endptsetupstat);
- writel(endptsetupstat, &dev->op_regs->endptsetupstat);
-
- /* Write-Clear all the endpoint complete status bits */
- endptcomplete = readl(&dev->op_regs->endptcomplete);
- writel(endptcomplete, &dev->op_regs->endptcomplete);
-
- /* wait until all endptprime bits cleared */
- timeout = jiffies + PRIME_TIMEOUT;
- while (readl(&dev->op_regs->endptprime)) {
- if (time_after(jiffies, timeout)) {
- dev_err(&dev->pdev->dev, "USB reset timeout\n");
- break;
- }
- cpu_relax();
- }
-
- /* write 1s to endptflush register to clear any primed buffers */
- writel((u32) ~0, &dev->op_regs->endptflush);
-
- if (readl(&dev->op_regs->portsc1) & PORTS_PR) {
- dev_vdbg(&dev->pdev->dev, "USB bus reset\n");
- /* bus is reseting */
- dev->bus_reset = 1;
-
- /* reset all the queues, stop all USB activities */
- stop_activity(dev);
- dev->usb_state = USB_STATE_DEFAULT;
- } else {
- dev_vdbg(&dev->pdev->dev, "device controller reset\n");
- /* controller reset */
- langwell_udc_reset(dev);
-
- /* reset all the queues, stop all USB activities */
- stop_activity(dev);
-
- /* reset ep0 dQH and endptctrl */
- ep0_reset(dev);
-
- /* enable interrupt and set controller to run state */
- langwell_udc_start(dev);
-
- dev->usb_state = USB_STATE_ATTACHED;
- }
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* USB bus suspend/resume interrupt */
-static void handle_bus_suspend(struct langwell_udc *dev)
-{
- dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- dev->resume_state = dev->usb_state;
- dev->usb_state = USB_STATE_SUSPENDED;
-
- /* report suspend to the driver */
- if (dev->driver) {
- if (dev->driver->suspend) {
- spin_unlock(&dev->lock);
- dev->driver->suspend(&dev->gadget);
- spin_lock(&dev->lock);
- dev_dbg(&dev->pdev->dev, "suspend %s\n",
- dev->driver->driver.name);
- }
- }
-
- /* enter PHY low power suspend */
- if (dev->pdev->device != 0x0829)
- langwell_phy_low_power(dev, 0);
-
- dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-static void handle_bus_resume(struct langwell_udc *dev)
-{
- dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- dev->usb_state = dev->resume_state;
- dev->resume_state = 0;
-
- /* exit PHY low power suspend */
- if (dev->pdev->device != 0x0829)
- langwell_phy_low_power(dev, 0);
-
- /* report resume to the driver */
- if (dev->driver) {
- if (dev->driver->resume) {
- spin_unlock(&dev->lock);
- dev->driver->resume(&dev->gadget);
- spin_lock(&dev->lock);
- dev_dbg(&dev->pdev->dev, "resume %s\n",
- dev->driver->driver.name);
- }
- }
-
- dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* USB device controller interrupt handler */
-static irqreturn_t langwell_irq(int irq, void *_dev)
-{
- struct langwell_udc *dev = _dev;
- u32 usbsts,
- usbintr,
- irq_sts,
- portsc1;
-
- dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- if (dev->stopped) {
- dev_vdbg(&dev->pdev->dev, "handle IRQ_NONE\n");
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return IRQ_NONE;
- }
-
- spin_lock(&dev->lock);
-
- /* USB status */
- usbsts = readl(&dev->op_regs->usbsts);
-
- /* USB interrupt enable */
- usbintr = readl(&dev->op_regs->usbintr);
-
- irq_sts = usbsts & usbintr;
- dev_vdbg(&dev->pdev->dev,
- "usbsts = 0x%08x, usbintr = 0x%08x, irq_sts = 0x%08x\n",
- usbsts, usbintr, irq_sts);
-
- if (!irq_sts) {
- dev_vdbg(&dev->pdev->dev, "handle IRQ_NONE\n");
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- spin_unlock(&dev->lock);
- return IRQ_NONE;
- }
-
- /* Write-Clear interrupt status bits */
- writel(irq_sts, &dev->op_regs->usbsts);
-
- /* resume from suspend */
- portsc1 = readl(&dev->op_regs->portsc1);
- if (dev->usb_state == USB_STATE_SUSPENDED)
- if (!(portsc1 & PORTS_SUSP))
- handle_bus_resume(dev);
-
- /* USB interrupt */
- if (irq_sts & STS_UI) {
- dev_vdbg(&dev->pdev->dev, "USB interrupt\n");
-
- /* setup packet received from ep0 */
- if (readl(&dev->op_regs->endptsetupstat)
- & EP0SETUPSTAT_MASK) {
- dev_vdbg(&dev->pdev->dev,
- "USB SETUP packet received interrupt\n");
- /* setup tripwire semaphone */
- setup_tripwire(dev);
- handle_setup_packet(dev, &dev->local_setup_buff);
- }
-
- /* USB transfer completion */
- if (readl(&dev->op_regs->endptcomplete)) {
- dev_vdbg(&dev->pdev->dev,
- "USB transfer completion interrupt\n");
- handle_trans_complete(dev);
- }
- }
-
- /* SOF received interrupt (for ISO transfer) */
- if (irq_sts & STS_SRI) {
- /* FIXME */
- /* dev_vdbg(&dev->pdev->dev, "SOF received interrupt\n"); */
- }
-
- /* port change detect interrupt */
- if (irq_sts & STS_PCI) {
- dev_vdbg(&dev->pdev->dev, "port change detect interrupt\n");
- handle_port_change(dev);
- }
-
- /* suspend interrupt */
- if (irq_sts & STS_SLI) {
- dev_vdbg(&dev->pdev->dev, "suspend interrupt\n");
- handle_bus_suspend(dev);
- }
-
- /* USB reset interrupt */
- if (irq_sts & STS_URI) {
- dev_vdbg(&dev->pdev->dev, "USB reset interrupt\n");
- handle_usb_reset(dev);
- }
-
- /* USB error or system error interrupt */
- if (irq_sts & (STS_UEI | STS_SEI)) {
- /* FIXME */
- dev_warn(&dev->pdev->dev, "error IRQ, irq_sts: %x\n", irq_sts);
- }
-
- spin_unlock(&dev->lock);
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return IRQ_HANDLED;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* release device structure */
-static void gadget_release(struct device *_dev)
-{
- struct langwell_udc *dev = dev_get_drvdata(_dev);
-
- dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- complete(dev->done);
-
- dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- kfree(dev);
-}
-
-
-/* enable SRAM caching if SRAM detected */
-static void sram_init(struct langwell_udc *dev)
-{
- struct pci_dev *pdev = dev->pdev;
-
- dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- dev->sram_addr = pci_resource_start(pdev, 1);
- dev->sram_size = pci_resource_len(pdev, 1);
- dev_info(&dev->pdev->dev, "Found private SRAM at %x size:%x\n",
- dev->sram_addr, dev->sram_size);
- dev->got_sram = 1;
-
- if (pci_request_region(pdev, 1, kobject_name(&pdev->dev.kobj))) {
- dev_warn(&dev->pdev->dev, "SRAM request failed\n");
- dev->got_sram = 0;
- } else if (!dma_declare_coherent_memory(&pdev->dev, dev->sram_addr,
- dev->sram_addr, dev->sram_size, DMA_MEMORY_MAP)) {
- dev_warn(&dev->pdev->dev, "SRAM DMA declare failed\n");
- pci_release_region(pdev, 1);
- dev->got_sram = 0;
- }
-
- dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* release SRAM caching */
-static void sram_deinit(struct langwell_udc *dev)
-{
- struct pci_dev *pdev = dev->pdev;
-
- dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- dma_release_declared_memory(&pdev->dev);
- pci_release_region(pdev, 1);
-
- dev->got_sram = 0;
-
- dev_info(&dev->pdev->dev, "release SRAM caching\n");
- dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* tear down the binding between this driver and the pci device */
-static void langwell_udc_remove(struct pci_dev *pdev)
-{
- struct langwell_udc *dev = pci_get_drvdata(pdev);
-
- DECLARE_COMPLETION(done);
-
- BUG_ON(dev->driver);
- dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- dev->done = &done;
-
- /* free dTD dma_pool and dQH */
- if (dev->dtd_pool)
- dma_pool_destroy(dev->dtd_pool);
-
- if (dev->ep_dqh)
- dma_free_coherent(&pdev->dev, dev->ep_dqh_size,
- dev->ep_dqh, dev->ep_dqh_dma);
-
- /* release SRAM caching */
- if (dev->has_sram && dev->got_sram)
- sram_deinit(dev);
-
- if (dev->status_req) {
- kfree(dev->status_req->req.buf);
- kfree(dev->status_req);
- }
-
- kfree(dev->ep);
-
- /* disable IRQ handler */
- if (dev->got_irq)
- free_irq(pdev->irq, dev);
-
- if (dev->cap_regs)
- iounmap(dev->cap_regs);
-
- if (dev->region)
- release_mem_region(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
-
- if (dev->enabled)
- pci_disable_device(pdev);
-
- dev->cap_regs = NULL;
-
- dev_info(&dev->pdev->dev, "unbind\n");
- dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
- device_unregister(&dev->gadget.dev);
- device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
- device_remove_file(&pdev->dev, &dev_attr_remote_wakeup);
-
- pci_set_drvdata(pdev, NULL);
-
- /* free dev, wait for the release() finished */
- wait_for_completion(&done);
-}
-
-
-/*
- * wrap this driver around the specified device, but
- * don't respond over USB until a gadget driver binds to us.
- */
-static int langwell_udc_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
-{
- struct langwell_udc *dev;
- unsigned long resource, len;
- void __iomem *base = NULL;
- size_t size;
- int retval;
-
- /* alloc, and start init */
- dev = kzalloc(sizeof *dev, GFP_KERNEL);
- if (dev == NULL) {
- retval = -ENOMEM;
- goto error;
- }
-
- /* initialize device spinlock */
- spin_lock_init(&dev->lock);
-
- dev->pdev = pdev;
- dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- pci_set_drvdata(pdev, dev);
-
- /* now all the pci goodies ... */
- if (pci_enable_device(pdev) < 0) {
- retval = -ENODEV;
- goto error;
- }
- dev->enabled = 1;
-
- /* control register: BAR 0 */
- resource = pci_resource_start(pdev, 0);
- len = pci_resource_len(pdev, 0);
- if (!request_mem_region(resource, len, driver_name)) {
- dev_err(&dev->pdev->dev, "controller already in use\n");
- retval = -EBUSY;
- goto error;
- }
- dev->region = 1;
-
- base = ioremap_nocache(resource, len);
- if (base == NULL) {
- dev_err(&dev->pdev->dev, "can't map memory\n");
- retval = -EFAULT;
- goto error;
- }
-
- dev->cap_regs = (struct langwell_cap_regs __iomem *) base;
- dev_vdbg(&dev->pdev->dev, "dev->cap_regs: %p\n", dev->cap_regs);
- dev->op_regs = (struct langwell_op_regs __iomem *)
- (base + OP_REG_OFFSET);
- dev_vdbg(&dev->pdev->dev, "dev->op_regs: %p\n", dev->op_regs);
-
- /* irq setup after old hardware is cleaned up */
- if (!pdev->irq) {
- dev_err(&dev->pdev->dev, "No IRQ. Check PCI setup!\n");
- retval = -ENODEV;
- goto error;
- }
-
- dev->has_sram = 1;
- dev->got_sram = 0;
- dev_vdbg(&dev->pdev->dev, "dev->has_sram: %d\n", dev->has_sram);
-
- /* enable SRAM caching if detected */
- if (dev->has_sram && !dev->got_sram)
- sram_init(dev);
-
- dev_info(&dev->pdev->dev,
- "irq %d, io mem: 0x%08lx, len: 0x%08lx, pci mem 0x%p\n",
- pdev->irq, resource, len, base);
- /* enables bus-mastering for device dev */
- pci_set_master(pdev);
-
- if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED,
- driver_name, dev) != 0) {
- dev_err(&dev->pdev->dev,
- "request interrupt %d failed\n", pdev->irq);
- retval = -EBUSY;
- goto error;
- }
- dev->got_irq = 1;
-
- /* set stopped bit */
- dev->stopped = 1;
-
- /* capabilities and endpoint number */
- dev->lpm = (readl(&dev->cap_regs->hccparams) & HCC_LEN) ? 1 : 0;
- dev->dciversion = readw(&dev->cap_regs->dciversion);
- dev->devcap = (readl(&dev->cap_regs->dccparams) & DEVCAP) ? 1 : 0;
- dev_vdbg(&dev->pdev->dev, "dev->lpm: %d\n", dev->lpm);
- dev_vdbg(&dev->pdev->dev, "dev->dciversion: 0x%04x\n",
- dev->dciversion);
- dev_vdbg(&dev->pdev->dev, "dccparams: 0x%08x\n",
- readl(&dev->cap_regs->dccparams));
- dev_vdbg(&dev->pdev->dev, "dev->devcap: %d\n", dev->devcap);
- if (!dev->devcap) {
- dev_err(&dev->pdev->dev, "can't support device mode\n");
- retval = -ENODEV;
- goto error;
- }
-
- /* a pair of endpoints (out/in) for each address */
- dev->ep_max = DEN(readl(&dev->cap_regs->dccparams)) * 2;
- dev_vdbg(&dev->pdev->dev, "dev->ep_max: %d\n", dev->ep_max);
-
- /* allocate endpoints memory */
- dev->ep = kzalloc(sizeof(struct langwell_ep) * dev->ep_max,
- GFP_KERNEL);
- if (!dev->ep) {
- dev_err(&dev->pdev->dev, "allocate endpoints memory failed\n");
- retval = -ENOMEM;
- goto error;
- }
-
- /* allocate device dQH memory */
- size = dev->ep_max * sizeof(struct langwell_dqh);
- dev_vdbg(&dev->pdev->dev, "orig size = %zd\n", size);
- if (size < DQH_ALIGNMENT)
- size = DQH_ALIGNMENT;
- else if ((size % DQH_ALIGNMENT) != 0) {
- size += DQH_ALIGNMENT + 1;
- size &= ~(DQH_ALIGNMENT - 1);
- }
- dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
- &dev->ep_dqh_dma, GFP_KERNEL);
- if (!dev->ep_dqh) {
- dev_err(&dev->pdev->dev, "allocate dQH memory failed\n");
- retval = -ENOMEM;
- goto error;
- }
- dev->ep_dqh_size = size;
- dev_vdbg(&dev->pdev->dev, "ep_dqh_size = %zd\n", dev->ep_dqh_size);
-
- /* initialize ep0 status request structure */
- dev->status_req = kzalloc(sizeof(struct langwell_request), GFP_KERNEL);
- if (!dev->status_req) {
- dev_err(&dev->pdev->dev,
- "allocate status_req memory failed\n");
- retval = -ENOMEM;
- goto error;
- }
- INIT_LIST_HEAD(&dev->status_req->queue);
-
- /* allocate a small amount of memory to get valid address */
- dev->status_req->req.buf = kmalloc(8, GFP_KERNEL);
- dev->status_req->req.dma = virt_to_phys(dev->status_req->req.buf);
-
- dev->resume_state = USB_STATE_NOTATTACHED;
- dev->usb_state = USB_STATE_POWERED;
- dev->ep0_dir = USB_DIR_OUT;
-
- /* remote wakeup reset to 0 when the device is reset */
- dev->remote_wakeup = 0;
- dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
-
- /* reset device controller */
- langwell_udc_reset(dev);
-
- /* initialize gadget structure */
- dev->gadget.ops = &langwell_ops; /* usb_gadget_ops */
- dev->gadget.ep0 = &dev->ep[0].ep; /* gadget ep0 */
- INIT_LIST_HEAD(&dev->gadget.ep_list); /* ep_list */
- dev->gadget.speed = USB_SPEED_UNKNOWN; /* speed */
- dev->gadget.max_speed = USB_SPEED_HIGH; /* support dual speed */
-
- /* the "gadget" abstracts/virtualizes the controller */
- dev_set_name(&dev->gadget.dev, "gadget");
- dev->gadget.dev.parent = &pdev->dev;
- dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
- dev->gadget.dev.release = gadget_release;
- dev->gadget.name = driver_name; /* gadget name */
-
- /* controller endpoints reinit */
- eps_reinit(dev);
-
- /* reset ep0 dQH and endptctrl */
- ep0_reset(dev);
-
- /* create dTD dma_pool resource */
- dev->dtd_pool = dma_pool_create("langwell_dtd",
- &dev->pdev->dev,
- sizeof(struct langwell_dtd),
- DTD_ALIGNMENT,
- DMA_BOUNDARY);
-
- if (!dev->dtd_pool) {
- retval = -ENOMEM;
- goto error;
- }
-
- /* done */
- dev_info(&dev->pdev->dev, "%s\n", driver_desc);
- dev_info(&dev->pdev->dev, "irq %d, pci mem %p\n", pdev->irq, base);
- dev_info(&dev->pdev->dev, "Driver version: " DRIVER_VERSION "\n");
- dev_info(&dev->pdev->dev, "Support (max) %d endpoints\n", dev->ep_max);
- dev_info(&dev->pdev->dev, "Device interface version: 0x%04x\n",
- dev->dciversion);
- dev_info(&dev->pdev->dev, "Controller mode: %s\n",
- dev->devcap ? "Device" : "Host");
- dev_info(&dev->pdev->dev, "Support USB LPM: %s\n",
- dev->lpm ? "Yes" : "No");
-
- dev_vdbg(&dev->pdev->dev,
- "After langwell_udc_probe(), print all registers:\n");
- print_all_registers(dev);
-
- retval = device_register(&dev->gadget.dev);
- if (retval)
- goto error;
-
- retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
- if (retval)
- goto error;
-
- retval = device_create_file(&pdev->dev, &dev_attr_langwell_udc);
- if (retval)
- goto error;
-
- retval = device_create_file(&pdev->dev, &dev_attr_remote_wakeup);
- if (retval)
- goto error_attr1;
-
- dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return 0;
-
-error_attr1:
- device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
-error:
- if (dev) {
- dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- langwell_udc_remove(pdev);
- }
-
- return retval;
-}
-
-
-/* device controller suspend */
-static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct langwell_udc *dev = pci_get_drvdata(pdev);
-
- dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- usb_del_gadget_udc(&dev->gadget);
- /* disable interrupt and set controller to stop state */
- langwell_udc_stop(dev);
-
- /* disable IRQ handler */
- if (dev->got_irq)
- free_irq(pdev->irq, dev);
- dev->got_irq = 0;
-
- /* save PCI state */
- pci_save_state(pdev);
-
- spin_lock_irq(&dev->lock);
- /* stop all usb activities */
- stop_activity(dev);
- spin_unlock_irq(&dev->lock);
-
- /* free dTD dma_pool and dQH */
- if (dev->dtd_pool)
- dma_pool_destroy(dev->dtd_pool);
-
- if (dev->ep_dqh)
- dma_free_coherent(&pdev->dev, dev->ep_dqh_size,
- dev->ep_dqh, dev->ep_dqh_dma);
-
- /* release SRAM caching */
- if (dev->has_sram && dev->got_sram)
- sram_deinit(dev);
-
- /* set device power state */
- pci_set_power_state(pdev, PCI_D3hot);
-
- /* enter PHY low power suspend */
- if (dev->pdev->device != 0x0829)
- langwell_phy_low_power(dev, 1);
-
- dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return 0;
-}
-
-
-/* device controller resume */
-static int langwell_udc_resume(struct pci_dev *pdev)
-{
- struct langwell_udc *dev = pci_get_drvdata(pdev);
- size_t size;
-
- dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- /* exit PHY low power suspend */
- if (dev->pdev->device != 0x0829)
- langwell_phy_low_power(dev, 0);
-
- /* set device D0 power state */
- pci_set_power_state(pdev, PCI_D0);
-
- /* enable SRAM caching if detected */
- if (dev->has_sram && !dev->got_sram)
- sram_init(dev);
-
- /* allocate device dQH memory */
- size = dev->ep_max * sizeof(struct langwell_dqh);
- dev_vdbg(&dev->pdev->dev, "orig size = %zd\n", size);
- if (size < DQH_ALIGNMENT)
- size = DQH_ALIGNMENT;
- else if ((size % DQH_ALIGNMENT) != 0) {
- size += DQH_ALIGNMENT + 1;
- size &= ~(DQH_ALIGNMENT - 1);
- }
- dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
- &dev->ep_dqh_dma, GFP_KERNEL);
- if (!dev->ep_dqh) {
- dev_err(&dev->pdev->dev, "allocate dQH memory failed\n");
- return -ENOMEM;
- }
- dev->ep_dqh_size = size;
- dev_vdbg(&dev->pdev->dev, "ep_dqh_size = %zd\n", dev->ep_dqh_size);
-
- /* create dTD dma_pool resource */
- dev->dtd_pool = dma_pool_create("langwell_dtd",
- &dev->pdev->dev,
- sizeof(struct langwell_dtd),
- DTD_ALIGNMENT,
- DMA_BOUNDARY);
-
- if (!dev->dtd_pool)
- return -ENOMEM;
-
- /* restore PCI state */
- pci_restore_state(pdev);
-
- /* enable IRQ handler */
- if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED,
- driver_name, dev) != 0) {
- dev_err(&dev->pdev->dev, "request interrupt %d failed\n",
- pdev->irq);
- return -EBUSY;
- }
- dev->got_irq = 1;
-
- /* reset and start controller to run state */
- if (dev->stopped) {
- /* reset device controller */
- langwell_udc_reset(dev);
-
- /* reset ep0 dQH and endptctrl */
- ep0_reset(dev);
-
- /* start device if gadget is loaded */
- if (dev->driver)
- langwell_udc_start(dev);
- }
-
- /* reset USB status */
- dev->usb_state = USB_STATE_ATTACHED;
- dev->ep0_state = WAIT_FOR_SETUP;
- dev->ep0_dir = USB_DIR_OUT;
-
- dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
- return 0;
-}
-
-
-/* pci driver shutdown */
-static void langwell_udc_shutdown(struct pci_dev *pdev)
-{
- struct langwell_udc *dev = pci_get_drvdata(pdev);
- u32 usbmode;
-
- dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
- /* reset controller mode to IDLE */
- usbmode = readl(&dev->op_regs->usbmode);
- dev_dbg(&dev->pdev->dev, "usbmode = 0x%08x\n", usbmode);
- usbmode &= (~3 | MODE_IDLE);
- writel(usbmode, &dev->op_regs->usbmode);
-
- dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static const struct pci_device_id pci_ids[] = { {
- .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
- .class_mask = ~0,
- .vendor = 0x8086,
- .device = 0x0811,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
-}, { /* end: all zeroes */ }
-};
-
-MODULE_DEVICE_TABLE(pci, pci_ids);
-
-
-static struct pci_driver langwell_pci_driver = {
- .name = (char *) driver_name,
- .id_table = pci_ids,
-
- .probe = langwell_udc_probe,
- .remove = langwell_udc_remove,
-
- /* device controller suspend/resume */
- .suspend = langwell_udc_suspend,
- .resume = langwell_udc_resume,
-
- .shutdown = langwell_udc_shutdown,
-};
-
-module_pci_driver(langwell_pci_driver);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Xiaochen Shen <xiaochen.shen@intel.com>");
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff