ARM: dts: uniphier: add PH1-Pro4 Sanji board support

Initial commit for PH1-Pro4 Sanji board support.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 2de870bb4938bc54451a2c33a4d1d6d2160785bb..60c724f941b6670691ce0b59dd5070608d0b738f 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -746,6 +746,7 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \
        uniphier-ph1-ld6b-ref.dtb \
        uniphier-ph1-pro4-ace.dtb \
        uniphier-ph1-pro4-ref.dtb \
+       uniphier-ph1-pro4-sanji.dtb \
        uniphier-ph1-sld3-ref.dtb \
        uniphier-ph1-sld8-ref.dtb \
        uniphier-proxstream2-gentil.dtb \

diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts
new file mode 100644 (file)
index 0000000..7c3a1fc
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts
@@ -0,0 +1,108 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 Sanji Board
+ *
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-pro4.dtsi"
+
+/ {
+       model = "UniPhier PH1-Pro4 Sanji Board";
+       compatible = "socionext,ph1-pro4-sanji", "socionext,ph1-pro4";
+
+       memory {
+               device_type = "memory";
+               reg = <0x80000000 0x80000000>;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       aliases {
+               serial0 = &serial0;
+               serial1 = &serial1;
+               i2c0 = &i2c0;
+               i2c1 = &i2c1;
+               i2c2 = &i2c2;
+               i2c3 = &i2c3;
+               i2c5 = &i2c5;
+               i2c6 = &i2c6;
+       };
+};
+
+&serial0 {
+       status = "okay";
+};
+
+&serial1 {
+       status = "okay";
+};
+
+&i2c0 {
+       status = "okay";
+
+       eeprom@54 {
+               compatible = "st,24c64";
+               reg = <0x54>;
+       };
+};
+
+&i2c1 {
+       status = "okay";
+};
+
+&i2c2 {
+       status = "okay";
+};
+
+&i2c3 {
+       status = "okay";
+};
+
+&usb2 {
+       status = "okay";
+};
+
+&usb3 {
+       status = "okay";
+};