USB: serial: ssu100.c: remove dbg() usage

dbg() was a very old USB-serial-specific macro.
This patch removes it from being used in the
driver and uses dev_dbg() instead.

CC: Alan Stern <stern@rowland.harvard.edu>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 3fee23bf0c141718228d6b3a5ae04bc42a58a96d..e719661899df4ec94c00ed52c6fb8f2a2ff2345e 100644 (file)
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -135,7 +135,7 @@ static inline int update_mctrl(struct usb_device *dev, unsigned int set,
        int result;
 
        if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
-               dbg("%s - DTR|RTS not being set|cleared", __func__);
+               dev_dbg(&dev->dev, "%s - DTR|RTS not being set|cleared\n", __func__);
                return 0;       /* no change */
        }
 
@@ -148,7 +148,7 @@ static inline int update_mctrl(struct usb_device *dev, unsigned int set,
 
        result = ssu100_setregister(dev, 0, UART_MCR, urb_value);
        if (result < 0)
-               dbg("%s Error from MODEM_CTRL urb", __func__);
+               dev_dbg(&dev->dev, "%s Error from MODEM_CTRL urb\n", __func__);
 
        return result;
 }
@@ -164,7 +164,7 @@ static int ssu100_initdevice(struct usb_device *dev)
 
        result = ssu100_getdevice(dev, data);
        if (result < 0) {
-               dbg("%s - get_device failed %i", __func__, result);
+               dev_dbg(&dev->dev, "%s - get_device failed %i\n", __func__, result);
                goto out;
        }
 
@@ -172,25 +172,25 @@ static int ssu100_initdevice(struct usb_device *dev)
 
        result = ssu100_setdevice(dev, data);
        if (result < 0) {
-               dbg("%s - setdevice failed %i", __func__, result);
+               dev_dbg(&dev->dev, "%s - setdevice failed %i\n", __func__, result);
                goto out;
        }
 
        result = ssu100_control_msg(dev, QT_GET_SET_PREBUF_TRIG_LVL, 128, 0);
        if (result < 0) {
-               dbg("%s - set prebuffer level failed %i", __func__, result);
+               dev_dbg(&dev->dev, "%s - set prebuffer level failed %i\n", __func__, result);
                goto out;
        }
 
        result = ssu100_control_msg(dev, QT_SET_ATF, ATC_DISABLED, 0);
        if (result < 0) {
-               dbg("%s - set ATFprebuffer level failed %i", __func__, result);
+               dev_dbg(&dev->dev, "%s - set ATFprebuffer level failed %i\n", __func__, result);
                goto out;
        }
 
        result = ssu100_getdevice(dev, data);
        if (result < 0) {
-               dbg("%s - get_device failed %i", __func__, result);
+               dev_dbg(&dev->dev, "%s - get_device failed %i\n", __func__, result);
                goto out;
        }
 
@@ -201,7 +201,7 @@ static int ssu100_initdevice(struct usb_device *dev)
 
        result = ssu100_setdevice(dev, data);
        if (result < 0) {
-               dbg("%s - setdevice failed %i", __func__, result);
+               dev_dbg(&dev->dev, "%s - setdevice failed %i\n", __func__, result);
                goto out;
        }
 
@@ -249,7 +249,7 @@ static void ssu100_set_termios(struct tty_struct *tty,
        if (!baud)
                baud = 9600;
 
-       dbg("%s - got baud = %d\n", __func__, baud);
+       dev_dbg(&port->dev, "%s - got baud = %d\n", __func__, baud);
 
 
        divisor = MAX_BAUD_RATE / baud;
@@ -261,7 +261,7 @@ static void ssu100_set_termios(struct tty_struct *tty,
 
        result = ssu100_control_msg(dev, QT_GET_SET_UART, divisor, urb_value);
        if (result < 0)
-               dbg("%s - set uart failed", __func__);
+               dev_dbg(&port->dev, "%s - set uart failed\n", __func__);
 
        if (cflag & CRTSCTS)
                result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
@@ -270,7 +270,7 @@ static void ssu100_set_termios(struct tty_struct *tty,
                result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
                                            0, 0);
        if (result < 0)
-               dbg("%s - set HW flow control failed", __func__);
+               dev_dbg(&port->dev, "%s - set HW flow control failed\n", __func__);
 
        if (I_IXOFF(tty) || I_IXON(tty)) {
                u16 x = ((u16)(START_CHAR(tty) << 8) | (u16)(STOP_CHAR(tty)));
@@ -282,7 +282,7 @@ static void ssu100_set_termios(struct tty_struct *tty,
                                            0, 0);
 
        if (result < 0)
-               dbg("%s - set SW flow control failed", __func__);
+               dev_dbg(&port->dev, "%s - set SW flow control failed\n", __func__);
 
 }
 
@@ -304,7 +304,7 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
                                 QT_TRANSFER_IN, 0x01,
                                 0, data, 2, 300);
        if (result < 0) {
-               dbg("%s - open failed %i", __func__, result);
+               dev_dbg(&port->dev, "%s - open failed %i\n", __func__, result);
                kfree(data);
                return result;
        }
@@ -319,7 +319,7 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
 /* set to 9600 */
        result = ssu100_control_msg(dev, QT_GET_SET_UART, 0x30, 0x0300);
        if (result < 0)
-               dbg("%s - set uart failed", __func__);
+               dev_dbg(&port->dev, "%s - set uart failed\n", __func__);
 
        if (tty)
                ssu100_set_termios(tty, port, tty->termios);
@@ -423,7 +423,7 @@ static int ssu100_ioctl(struct tty_struct *tty,
 {
        struct usb_serial_port *port = tty->driver_data;
 
-       dbg("%s cmd 0x%04x", __func__, cmd);
+       dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd);
 
        switch (cmd) {
        case TIOCGSERIAL:
@@ -437,7 +437,7 @@ static int ssu100_ioctl(struct tty_struct *tty,
                break;
        }
 
-       dbg("%s arg not supported", __func__);
+       dev_dbg(&port->dev, "%s arg not supported\n", __func__);
 
        return -ENOIOCTLCMD;
 }