arm64: dts: exynos: TM2 - remove unused UART3 and set clocks directly on CMU

UART3 device is not really needed for enabling audio block on TM2.
Enabling it made it working by enabling some common parent clocks,
what is now handled by improved exynos5433 clocks driver. Thus the UART3
device node can be safely disabled. The assigned-clocks entries are
however still needed, so move them under the respective CMU node.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index f8526cee54c1f14753ba63481684ebb95fe83e43..2569e4ab6f7e8bfc521c41f949fc06f7babf8c02 100644 (file)
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -158,6 +158,11 @@
        };
 };
 
+&cmu_aud {
+       assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
+       assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
+};
+
 &cmu_fsys {
        assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
                <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
@@ -914,12 +919,6 @@
        status = "okay";
 };
 
-&serial_3 {
-       assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
-       assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
-       status = "okay";
-};
-
 &spi_1 {
        cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
        status = "okay";