arm64: dts: rockchip: use pin constants to describe gpios

Use macros to describe gpios will make the dts easier to
read and write.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
[converted interrupt-gpios and new rk3399-evb backlight]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
index fff8b1931f26d76776d79e83aa9b090b2118f19c..4772917c5f7e6067a79cd22080741156329f215c 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -90,7 +90,7 @@
                        240 241 242 243 244 245 246 247
                        248 249 250 251 252 253 254 255>;
                default-brightness-level = <128>;
-               enable-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+               enable-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
                pinctrl-names = "default";
                pinctrl-0 = <&bl_en>;
                pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
@@ -101,7 +101,7 @@
                compatible = "mmc-pwrseq-emmc";
                pinctrl-0 = <&emmc_reset>;
                pinctrl-names = "default";
-               reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+               reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
        };
 
        keys: gpio-keys {
@@ -111,7 +111,7 @@
 
                power {
                        wakeup-source;
-                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
                        label = "GPIO Power";
                        linux,code = <KEY_POWER>;
                };
@@ -121,7 +121,7 @@
        vcc_host: vcc-host-regulator {
                compatible = "regulator-fixed";
                enable-active-high;
-               gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+               gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
                pinctrl-names = "default";
                pinctrl-0 = <&host_vbus_drv>;
                regulator-name = "vcc_host";
@@ -166,7 +166,7 @@
        phy-supply = <&vcc_lan>;
        phy-mode = "rmii";
        clock_in_out = "output";
-       snps,reset-gpio = <&gpio3 12 0>;
+       snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
        snps,reset-active-low;
        snps,reset-delays-us = <0 10000 1000000>;
        pinctrl-names = "default";

diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
index e5eeca2c24565a76b10c64183e5d143ccbed810a..e631d424f08ea64991b6d00d748819ce5328ae9c 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
@@ -66,7 +66,7 @@
 
        ir: ir-receiver {
                compatible = "gpio-ir-receiver";
-               gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+               gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
                pinctrl-names = "default";
                pinctrl-0 = <&ir_int>;
        };
@@ -77,7 +77,7 @@
                pinctrl-0 = <&pwr_key>;
 
                power {
-                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
                        label = "GPIO Power";
                        linux,code = <KEY_POWER>;
                        wakeup-source;
@@ -88,13 +88,13 @@
                compatible = "gpio-leds";
 
                blue {
-                       gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+                       gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
                        label = "geekbox:blue:led";
                        default-state = "on";
                };
 
                red {
-                       gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+                       gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
                        label = "geekbox:red:led";
                        default-state = "off";
                };
@@ -146,7 +146,7 @@
                pinctrl-names = "default";
                pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
                interrupt-parent = <&gpio0>;
-               interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+               interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
                rockchip,system-power-controller;
                vcc1-supply = <&vcc_sys>;
                vcc2-supply = <&vcc_sys>;

diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index ff5a40399d028ae887e4142cad88f6998ec2bb80..fac116acc12fa0f65755fe3897a87347cf75fded 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -61,7 +61,7 @@
                compatible = "mmc-pwrseq-emmc";
                pinctrl-0 = <&emmc_reset>;
                pinctrl-names = "default";
-               reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+               reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
        };
 
        ext_gmac: external-gmac-clock {
@@ -78,7 +78,7 @@
 
                power {
                        wakeup-source;
-                       gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+                       gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
                        label = "GPIO Power";
                        linux,code = <KEY_POWER>;
                };
@@ -88,7 +88,7 @@
                compatible = "gpio-leds";
 
                red {
-                       gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+                       gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
                        label = "orion:red:led";
                        pinctrl-names = "default";
                        pinctrl-0 = <&led_ctl>;
@@ -96,7 +96,7 @@
                };
 
                blue {
-                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+                       gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
                        label = "orion:blue:led";
                        pinctrl-names = "default";
                        pinctrl-0 = <&stby_pwren>;
@@ -117,7 +117,7 @@
        /* supplies both host and otg */
        vcc_host: vcc-host-regulator {
                compatible = "regulator-fixed";
-               gpio = <&gpio0 4 GPIO_ACTIVE_LOW>;
+               gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
                pinctrl-names = "default";
                pinctrl-0 = <&host_vbus_drv>;
                regulator-name = "vcc_host";
@@ -149,7 +149,7 @@
        vcc_sd: vcc-sd-regulator {
                compatible = "regulator-fixed";
                regulator-name = "vcc_sd";
-               gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
+               gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
                regulator-min-microvolt = <1800000>;
                regulator-max-microvolt = <3300000>;
                vin-supply = <&vcc_io>;
@@ -217,7 +217,7 @@
        phy-mode = "rgmii";
        pinctrl-names = "default";
        pinctrl-0 = <&rgmii_pins>;
-       snps,reset-gpio = <&gpio3 12 0>;
+       snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
        snps,reset-active-low;
        snps,reset-delays-us = <0 10000 1000000>;
        tx_delay = <0x30>;

diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
index 85f7a243d744d252cc26cb25423ef77ad1e2b778..8cdb3bff9c55b1d8935ac03cadd6a8803d9de8f6 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -63,7 +63,7 @@
                pinctrl-0 = <&pwr_key>;
 
                power {
-                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
                        label = "GPIO Power";
                        linux,code = <KEY_POWER>;
                        wakeup-source;
@@ -105,7 +105,7 @@
                compatible = "rockchip,rk808";
                reg = <0x1b>;
                interrupt-parent = <&gpio0>;
-               interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+               interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
                pinctrl-names = "default";
                pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
                rockchip,system-power-controller;
@@ -236,7 +236,7 @@
                compatible = "bosch,bma250";
                reg = <0x18>;
                interrupt-parent = <&gpio2>;
-               interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+               interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>;
        };
 };
 
@@ -247,8 +247,8 @@
                compatible = "silead,gsl1680";
                reg = <0x40>;
                interrupt-parent = <&gpio3>;
-               interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
-               power-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+               interrupts = <RK_PD4 IRQ_TYPE_EDGE_FALLING>;
+               power-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
                touchscreen-size-x = <800>;
                touchscreen-size-y = <1280>;
                silead,max-fingers = <5>;

diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index eed1ef6669ffe04aa1706f79426de11bc4ecf4ab..7134181f1dc27190ee2c3be5f1161288a864d3c8 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -61,7 +61,7 @@
                compatible = "mmc-pwrseq-emmc";
                pinctrl-0 = <&emmc_reset>;
                pinctrl-names = "default";
-               reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+               reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
        };
 
        keys: gpio-keys {
@@ -71,7 +71,7 @@
 
                power {
                        wakeup-source;
-                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
                        label = "GPIO Power";
                        linux,code = <KEY_POWER>;
                };
@@ -81,7 +81,7 @@
                compatible = "gpio-leds";
 
                work {
-                       gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+                       gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
                        label = "r88:green:led";
                        pinctrl-names = "default";
                        pinctrl-0 = <&led_ctl>;
@@ -90,7 +90,7 @@
 
        ir: ir-receiver {
                compatible = "gpio-ir-receiver";
-               gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+               gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
                pinctrl-names = "default";
                pinctrl-0 = <&ir_int>;
        };
@@ -104,10 +104,10 @@
 
                reset-gpios =
                        /* BT_RST_N */
-                       <&gpio3 5 GPIO_ACTIVE_LOW>,
+                       <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>,
 
                        /* WL_REG_ON */
-                       <&gpio3 4 GPIO_ACTIVE_LOW>;
+                       <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
        };
 
        vcc_18: vcc18-regulator {
@@ -124,7 +124,7 @@
        vcc_host: vcc-host-regulator {
                compatible = "regulator-fixed";
                enable-active-high;
-               gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+               gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
                pinctrl-names = "default";
                pinctrl-0 = <&host_vbus_drv>;
                regulator-name = "vcc_host";
@@ -199,7 +199,7 @@
        phy-supply = <&vcc_lan>;
        phy-mode = "rmii";
        clock_in_out = "output";
-       snps,reset-gpio = <&gpio3 12 0>;
+       snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
        snps,reset-active-low;
        snps,reset-delays-us = <0 10000 1000000>;
        pinctrl-names = "default";

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
index 3040a989d6998737f744e778076b09c89057640f..42033bcc614cbb05b9615538bb66728ca11416df 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -85,7 +85,7 @@
                        240 241 242 243 244 245 246 247
                        248 249 250 251 252 253 254 255>;
                default-brightness-level = <200>;
-               enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+               enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
                pwms = <&pwm0 0 25000 0>;
        };
 
@@ -128,7 +128,7 @@
        vcc5v0_host: vcc5v0-host-regulator {
                compatible = "regulator-fixed";
                enable-active-high;
-               gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+               gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
                pinctrl-names = "default";
                pinctrl-0 = <&vcc5v0_host_en>;
                regulator-name = "vcc5v0_host";
@@ -163,7 +163,7 @@
        phy-mode = "rgmii";
        pinctrl-names = "default";
        pinctrl-0 = <&rgmii_pins>;
-       snps,reset-gpio = <&gpio3 15 GPIO_ACTIVE_LOW>;
+       snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
        snps,reset-active-low;
        snps,reset-delays-us = <0 10000 50000>;
        tx_delay = <0x28>;
@@ -196,7 +196,7 @@
 };
 
 &pcie0 {
-       ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+       ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
        num-lanes = <4>;
        pinctrl-names = "default";
        pinctrl-0 = <&pcie_clkreqn>;