#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <mach/camera.h>
#include <mach/ams-delta-fiq.h>
#include <plat/flash.h>
#include <plat/fpga.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
/* fsample is pretty close to p2-sample */
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
/* assume no Mini-AB port */
#include <plat/irda.h>
#include <plat/usb.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/flash.h>
#include "board-h2.h"
#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/dma.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/flash.h>
#include "board-h3.h"
#include <asm/mach/arch.h>
#include <plat/omap7xx.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/usb.h>
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/mmc.h>
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/hwa742.h>
#include <plat/lcd_mipid.h>
#include <plat/mmc.h>
#include <plat/usb.h>
#include <plat/mux.h>
#include <plat/tc.h>
-#include <plat/common.h>
+#include "common.h"
/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
#define OMAP_OSK_ETHR_START 0x04800300
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#define PALMTE_USBDETECT_GPIO 0
#define PALMTE_USB_OR_DC_GPIO 1
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <plat/fpga.h>
#include <plat/flash.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
static const unsigned int p2_keymap[] = {
#include <plat/usb.h>
#include <plat/tc.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/keypad.h>
#include <plat/board-sx1.h>
#include <asm/mach/map.h>
#include <plat/board-voiceblue.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/tc.h>
--- /dev/null
+/*
+ *
+ * Header for code common to all OMAP1 machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H
+#define __ARCH_ARM_MACH_OMAP1_COMMON_H
+
+#include <plat/common.h>
+
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+void omap7xx_map_io(void);
+#else
+static inline void omap7xx_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+void omap15xx_map_io(void);
+#else
+static inline void omap15xx_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+void omap16xx_map_io(void);
+#else
+static inline void omap16xx_map_io(void)
+{
+}
+#endif
+
+void omap1_init_early(void);
+void omap1_init_irq(void);
+
+extern struct sys_timer omap1_timer;
+extern bool omap_32k_timer_init(void);
+
+#endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */
#include <mach/hardware.h>
#include <asm/mach/map.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-#include <plat/common.h>
+#include "common.h"
#ifdef CONFIG_OMAP_MPU_TIMER
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/dmtimer.h>
/*
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <plat/gpmc-smc91x.h>
#include <plat/mcspi.h>
#include <plat/board.h>
#include <plat/usb.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <video/omapdss.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
#include <plat/gpmc-smc91x.h>
#include <plat/usb.h>
#include <linux/leds_pwm.h>
#include <mach/hardware.h>
-#include <mach/omap4-common.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
#include <plat/omap4-keypad.h>
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include "mux.h"
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <plat/led.h>
#include <plat/usb.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <video/omapdss.h>
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/nand.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include <plat/nand.h>
#include <plat/gpmc.h>
#include <asm/mach/flash.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
#include <asm/mach/arch.h>
#include <plat/board.h>
-#include <plat/common.h>
-#include <mach/omap4-common.h>
+#include "common.h"
#include "common-board-devices.h"
/*
#include <plat/usb.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/menelaus.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <asm/mach/arch.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <video/omapdss.h>
#include <plat/mcspi.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <mach/board-zoom.h>
#include <asm/mach-types.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/menelaus.h>
#include <mach/irqs.h>
#include <plat/mcspi.h>
#include <asm/mach/flash.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-dvi.h>
#include <plat/gpmc.h>
#include <plat/board.h>
#include <plat/usb.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/mcspi.h>
#include <video/omapdss.h>
#include <video/omap-panel-dvi.h>
#include <plat/mux.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc-smsc911x.h>
#include <plat/gpmc.h>
#include <plat/sdrc.h>
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <mach/hardware.h>
#include <plat/mcspi.h>
#include <plat/usb.h>
#include <asm/mach/flash.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
#include <asm/mach/flash.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
#include <linux/wl12xx.h>
#include <mach/hardware.h>
-#include <mach/omap4-common.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <video/omapdss.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
#include <video/omap-panel-dvi.h>
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
#include <plat/mmc.h>
#include <plat/usb.h>
#include <plat/gpmc.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/onenand.h>
#include "mux.h"
#include <plat/mcspi.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <plat/onenand.h>
#include <plat/mcspi.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <plat/irqs.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
static struct omap_board_config_kernel ti8168_evm_config[] __initdata = {
};
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include <mach/board-zoom.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
#include <plat/usb.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include "cm.h"
#include "cm1_44xx.h"
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include "cm.h"
#include "cm1_44xx.h"
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
#include <plat/mux.h>
--- /dev/null
+/*
+ * Header for code common to all OMAP2+ machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
+#define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
+
+#include <linux/delay.h>
+#include <plat/common.h>
+
+#ifdef CONFIG_SOC_OMAP2420
+extern void omap242x_map_common_io(void);
+#else
+static inline void omap242x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAP2430
+extern void omap243x_map_common_io(void);
+#else
+static inline void omap243x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+extern void omap34xx_map_common_io(void);
+#else
+static inline void omap34xx_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAPTI816X
+extern void omapti816x_map_common_io(void);
+#else
+static inline void omapti816x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+extern void omap44xx_map_common_io(void);
+#else
+static inline void omap44xx_map_common_io(void)
+{
+}
+#endif
+
+extern void omap2_init_common_infrastructure(void);
+
+extern struct sys_timer omap2_timer;
+extern struct sys_timer omap3_timer;
+extern struct sys_timer omap3_secure_timer;
+extern struct sys_timer omap4_timer;
+
+void omap2420_init_early(void);
+void omap2430_init_early(void);
+void omap3430_init_early(void);
+void omap35xx_init_early(void);
+void omap3630_init_early(void);
+void omap3_init_early(void); /* Do not use this one */
+void am35xx_init_early(void);
+void ti816x_init_early(void);
+void omap4430_init_early(void);
+
+/*
+ * IO bases for various OMAP processors
+ * Except the tap base, rest all the io bases
+ * listed are physical addresses.
+ */
+struct omap_globals {
+ u32 class; /* OMAP class to detect */
+ void __iomem *tap; /* Control module ID code */
+ void __iomem *sdrc; /* SDRAM Controller */
+ void __iomem *sms; /* SDRAM Memory Scheduler */
+ void __iomem *ctrl; /* System Control Module */
+ void __iomem *ctrl_pad; /* PAD Control Module */
+ void __iomem *prm; /* Power and Reset Management */
+ void __iomem *cm; /* Clock Management */
+ void __iomem *cm2;
+};
+
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_3xxx(void);
+void omap2_set_globals_443x(void);
+void omap2_set_globals_ti816x(void);
+
+/* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_tap(struct omap_globals *);
+void omap2_set_globals_sdrc(struct omap_globals *);
+void omap2_set_globals_control(struct omap_globals *);
+void omap2_set_globals_prcm(struct omap_globals *);
+
+void omap242x_map_io(void);
+void omap243x_map_io(void);
+void omap3_map_io(void);
+void omap4_map_io(void);
+
+/**
+ * omap_test_timeout - busy-loop, testing a condition
+ * @cond: condition to test until it evaluates to true
+ * @timeout: maximum number of microseconds in the timeout
+ * @index: loop index (integer)
+ *
+ * Loop waiting for @cond to become true or until at least @timeout
+ * microseconds have passed. To use, define some integer @index in the
+ * calling code. After running, if @index == @timeout, then the loop has
+ * timed out.
+ */
+#define omap_test_timeout(cond, timeout, index) \
+({ \
+ for (index = 0; index < timeout; index++) { \
+ if (cond) \
+ break; \
+ udelay(1); \
+ } \
+})
+
+extern struct device *omap2_get_mpuss_device(void);
+extern struct device *omap2_get_iva_device(void);
+extern struct device *omap2_get_l3_device(void);
+extern struct device *omap4_get_dsp_device(void);
+
+void omap2_init_irq(void);
+void omap3_init_irq(void);
+void ti816x_init_irq(void);
+extern int omap_irq_pending(void);
+void omap_intc_save_context(void);
+void omap_intc_restore_context(void);
+void omap3_intc_suspend(void);
+void omap3_intc_prepare_idle(void);
+void omap3_intc_resume_idle(void);
+
+/*
+ * wfi used in low power code. Directly opcode is used instead
+ * of instruction to avoid mulit-omap build break
+ */
+#ifdef CONFIG_THUMB2_KERNEL
+#define do_wfi() __asm__ __volatile__ ("wfi" : : : "memory")
+#else
+#define do_wfi() \
+ __asm__ __volatile__ (".word 0xe320f003" : : : "memory")
+#endif
+
+#ifdef CONFIG_CACHE_L2X0
+extern void __iomem *l2cache_base;
+#endif
+
+extern void __iomem *gic_dist_base_addr;
+
+extern void __init gic_init_irq(void);
+extern void omap_smc1(u32 fn, u32 arg);
+
+#ifdef CONFIG_SMP
+/* Needed for secondary core boot */
+extern void omap_secondary_startup(void);
+extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
+extern void omap_auxcoreboot_addr(u32 cpu_addr);
+extern u32 omap_read_auxcoreboot0(void);
+#endif
+
+#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
#include <linux/kernel.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/sdrc.h>
#include "cm-regbits-34xx.h"
#include <plat/cpu.h>
#include <plat/i2c.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/omap_hwmod.h>
#include "mux.h"
#include <asm/cputype.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/cpu.h>
#include <mach/id.h>
+++ /dev/null
-/*
- * omap4-common.h: OMAP4 specific common header file
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- *
- * Author:
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef OMAP_ARCH_OMAP4_COMMON_H
-#define OMAP_ARCH_OMAP4_COMMON_H
-
-/*
- * wfi used in low power code. Directly opcode is used instead
- * of instruction to avoid mulit-omap build break
- */
-#ifdef CONFIG_THUMB2_KERNEL
-#define do_wfi() __asm__ __volatile__ ("wfi" : : : "memory")
-#else
-#define do_wfi() \
- __asm__ __volatile__ (".word 0xe320f003" : : : "memory")
-#endif
-
-#ifdef CONFIG_CACHE_L2X0
-extern void __iomem *l2cache_base;
-#endif
-
-extern void __iomem *gic_dist_base_addr;
-
-extern void __init gic_init_irq(void);
-extern void omap_smc1(u32 fn, u32 arg);
-
-#ifdef CONFIG_SMP
-/* Needed for secondary core boot */
-extern void omap_secondary_startup(void);
-extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
-extern void omap_auxcoreboot_addr(u32 cpu_addr);
-extern u32 omap_read_auxcoreboot0(void);
-#endif
-#endif
#include "clock3xxx.h"
#include "clock44xx.h"
-#include <plat/common.h>
+#include "common.h"
#include <plat/omap-pm.h>
#include "voltage.h"
#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/omap_hwmod.h>
#include <plat/multi.h>
-#include <plat/common.h>
+#include "common.h"
/*
* The machine specific code may provide the extra mapping besides the
#include <linux/smp.h>
#include <asm/cacheflush.h>
-#include <mach/omap4-common.h>
+
+#include "common.h"
int platform_cpu_kill(unsigned int cpu)
{
#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
-#include <mach/omap4-common.h>
+
+#include "common.h"
/* SCU base address */
static void __iomem *scu_base;
#include <plat/irqs.h>
#include <mach/hardware.h>
-#include <mach/omap4-common.h>
+
+#include "common.h"
#ifdef CONFIG_CACHE_L2X0
void __iomem *l2cache_base;
#include <linux/mutex.h>
#include <linux/spinlock.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/cpu.h>
#include "clockdomain.h"
#include "powerdomain.h"
#include <plat/omap-pm.h>
#include <plat/omap_device.h>
-#include <plat/common.h>
+#include "common.h"
#include "voltage.h"
#include "powerdomain.h"
#include <plat/dma.h>
#include <plat/board.h>
+#include "common.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm2xxx_3xxx.h"
#include <plat/gpmc.h>
#include <plat/dma.h>
+#include "common.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
#include <linux/err.h>
#include <linux/slab.h>
+#include "common.h"
#include "powerdomain.h"
-#include <mach/omap4-common.h>
struct power_state {
struct powerdomain *pwrdm;
#include <linux/export.h>
#include <mach/system.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/prcm.h>
#include <plat/irqs.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include "prcm_mpu44xx.h"
#include "cm-regbits-44xx.h"
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm44xx.h"
#include "prminst44xx.h"
#include <linux/io.h>
#include <plat/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/clock.h>
#include <plat/sdrc.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/clock.h>
#include <plat/sram.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/omap-serial.h>
#endif
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
#include <plat/clock.h>
#include <plat/dma.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
-#include <plat/common.h>
+#include "common.h"
#include "pm.h"
#include "smartreflex.h"
#include <plat/dmtimer.h>
#include <asm/localtimer.h>
#include <asm/sched_clock.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
#include <plat/omap-pm.h>
#include <linux/err.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm-regbits-34xx.h"
#include "voltage.h"
#include <linux/err.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#include <linux/slab.h>
#include <linux/clk.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm-regbits-34xx.h"
#include "prm-regbits-44xx.h"
#include <linux/err.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/cpu.h>
#include "prm-regbits-34xx.h"
#include <linux/err.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm-regbits-44xx.h"
#include "prm44xx.h"
#include <linux/kernel.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include "voltage.h"
#include "vp.h"
#include <linux/err.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm-regbits-34xx.h"
#include "voltage.h"
#include <linux/err.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
#define __ARCH_ARM_MACH_OMAP_COMMON_H
-#include <linux/delay.h>
-
#include <plat/i2c.h>
-struct sys_timer;
-
-extern void omap_map_common_io(void);
-extern struct sys_timer omap1_timer;
-extern struct sys_timer omap2_timer;
-extern struct sys_timer omap3_timer;
-extern struct sys_timer omap3_secure_timer;
-extern struct sys_timer omap4_timer;
-extern bool omap_32k_timer_init(void);
extern int __init omap_init_clocksource_32k(void);
extern unsigned long long notrace omap_32k_sched_clock(void);
extern void omap_reserve(void);
-
-void omap2420_init_early(void);
-void omap2430_init_early(void);
-void omap3430_init_early(void);
-void omap35xx_init_early(void);
-void omap3630_init_early(void);
-void omap3_init_early(void); /* Do not use this one */
-void am35xx_init_early(void);
-void ti816x_init_early(void);
-void omap4430_init_early(void);
-
void omap_sram_init(void);
-/*
- * IO bases for various OMAP processors
- * Except the tap base, rest all the io bases
- * listed are physical addresses.
- */
-struct omap_globals {
- u32 class; /* OMAP class to detect */
- void __iomem *tap; /* Control module ID code */
- void __iomem *sdrc; /* SDRAM Controller */
- void __iomem *sms; /* SDRAM Memory Scheduler */
- void __iomem *ctrl; /* System Control Module */
- void __iomem *ctrl_pad; /* PAD Control Module */
- void __iomem *prm; /* Power and Reset Management */
- void __iomem *cm; /* Clock Management */
- void __iomem *cm2;
-};
-
-void omap2_set_globals_242x(void);
-void omap2_set_globals_243x(void);
-void omap2_set_globals_3xxx(void);
-void omap2_set_globals_443x(void);
-void omap2_set_globals_ti816x(void);
-
-/* These get called from omap2_set_globals_xxxx(), do not call these */
-void omap2_set_globals_tap(struct omap_globals *);
-void omap2_set_globals_sdrc(struct omap_globals *);
-void omap2_set_globals_control(struct omap_globals *);
-void omap2_set_globals_prcm(struct omap_globals *);
-
-void omap242x_map_io(void);
-void omap243x_map_io(void);
-void omap3_map_io(void);
-void omap4_map_io(void);
-
-
-/**
- * omap_test_timeout - busy-loop, testing a condition
- * @cond: condition to test until it evaluates to true
- * @timeout: maximum number of microseconds in the timeout
- * @index: loop index (integer)
- *
- * Loop waiting for @cond to become true or until at least @timeout
- * microseconds have passed. To use, define some integer @index in the
- * calling code. After running, if @index == @timeout, then the loop has
- * timed out.
- */
-#define omap_test_timeout(cond, timeout, index) \
-({ \
- for (index = 0; index < timeout; index++) { \
- if (cond) \
- break; \
- udelay(1); \
- } \
-})
-
-extern struct device *omap2_get_mpuss_device(void);
-extern struct device *omap2_get_iva_device(void);
-extern struct device *omap2_get_l3_device(void);
-extern struct device *omap4_get_dsp_device(void);
-
#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
extern void omap_writel(u32 v, u32 pa);
struct omap_sdrc_params;
-
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-void omap7xx_map_io(void);
-#else
-static inline void omap_map_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-void omap15xx_map_io(void);
-#else
-static inline void omap15xx_map_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP16XX
-void omap16xx_map_io(void);
-#else
-static inline void omap16xx_map_io(void)
-{
-}
-#endif
-
-void omap1_init_early(void);
-
-#ifdef CONFIG_SOC_OMAP2420
-extern void omap242x_map_common_io(void);
-#else
-static inline void omap242x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-extern void omap243x_map_common_io(void);
-#else
-static inline void omap243x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-extern void omap34xx_map_common_io(void);
-#else
-static inline void omap34xx_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAPTI816X
-extern void omapti816x_map_common_io(void);
-#else
-static inline void omapti816x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-extern void omap44xx_map_common_io(void);
-#else
-static inline void omap44xx_map_common_io(void)
-{
-}
-#endif
-
-extern void omap2_init_common_infrastructure(void);
extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
#ifndef __ASSEMBLY__
extern void __iomem *omap_irq_base;
-void omap1_init_irq(void);
-void omap2_init_irq(void);
-void omap3_init_irq(void);
-void ti816x_init_irq(void);
-extern int omap_irq_pending(void);
-void omap_intc_save_context(void);
-void omap_intc_restore_context(void);
-void omap3_intc_suspend(void);
-void omap3_intc_prepare_idle(void);
-void omap3_intc_resume_idle(void);
#endif
#include <mach/hardware.h>