/*
- * MPC5121E MDS Device Tree Source
+ * MPC5121E ADS Device Tree Source
*
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007,2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
#address-cells = <1>;
#size-cells = <1>;
+ aliases {
+ pci = &pci;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x00000000 0x10000000>; // 256MB at 0
};
+ mbx@20000000 {
+ compatible = "fsl,mpc5121-mbx";
+ reg = <0x20000000 0x4000>;
+ interrupts = <66 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ sram@30000000 {
+ compatible = "fsl,mpc5121-sram";
+ reg = <0x30000000 0x20000>; // 128K at 0x30000000
+ };
+
+ nfc@40000000 {
+ compatible = "fsl,mpc5121-nfc";
+ reg = <0x40000000 0x100000>; // 1M at 0x40000000
+ interrupts = <6 8>;
+ interrupt-parent = < &ipic >;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <1>;
+ // ADS has two Hynix 512MB Nand flash chips in a single
+ // stacked package .
+ chips = <2>;
+ nand0@0 {
+ label = "nand0";
+ reg = <0x00000000 0x02000000>; // first 32 MB of chip 0
+ };
+ nand1@20000000 {
+ label = "nand1";
+ reg = <0x20000000 0x02000000>; // first 32 MB of chip 1
+ };
+ };
+
localbus@80000020 {
- compatible = "fsl,mpc5121ads-localbus";
+ compatible = "fsl,mpc5121-localbus";
#address-cells = <2>;
#size-cells = <1>;
reg = <0x80000020 0x40>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0x0 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
bank-width = <4>;
- device-width = <1>;
+ device-width = <2>;
+ protected@0 {
+ label = "protected";
+ reg = <0x00000000 0x00040000>; // first sector is protected
+ read-only;
+ };
+ filesystem@40000 {
+ label = "filesystem";
+ reg = <0x00040000 0x03c00000>; // 60M for filesystem
+ };
+ kernel@3c40000 {
+ label = "kernel";
+ reg = <0x03c40000 0x00280000>; // 2.5M for kernel
+ };
+ device-tree@3ec0000 {
+ label = "device-tree";
+ reg = <0x03ec0000 0x00040000>; // one sector for device tree
+ };
+ u-boot@3f00000 {
+ label = "u-boot";
+ reg = <0x03f00000 0x00100000>; // 1M for u-boot
+ read-only;
+ };
};
board-control@2,0 {
compatible = "fsl,mpc5121ads-cpld";
reg = <0x2 0x0 0x8000>;
};
+
+ cpld_pic: pic@2,a {
+ compatible = "fsl,mpc5121ads-cpld-pic";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2 0xa 0x5>;
+ interrupt-parent = < &ipic >;
+ // irq routing
+ // all irqs but touch screen are routed to irq0 (ipic 48)
+ // touch screen is statically routed to irq1 (ipic 17)
+ // so don't use it here
+ interrupts = <48 0x8>;
+ };
};
soc@80000000 {
reg = <0xc00 0x100>;
};
- // 512x PSCs are not 52xx PSCs compatible
+ rtc@a00 { // Real time clock
+ compatible = "fsl,mpc5121-rtc";
+ reg = <0xa00 0x100>;
+ interrupts = <79 0x8 80 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ clock@f00 { // Clock control
+ compatible = "fsl,mpc5121-clock";
+ reg = <0xf00 0x100>;
+ };
+
+ pmc@1000{ //Power Management Controller
+ compatible = "fsl,mpc5121-pmc";
+ reg = <0x1000 0x100>;
+ interrupts = <83 0x2>;
+ interrupt-parent = < &ipic >;
+ };
+
+ gpio@1100 {
+ compatible = "fsl,mpc5121-gpio";
+ reg = <0x1100 0x100>;
+ interrupts = <78 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ mscan@1300 {
+ compatible = "fsl,mpc5121-mscan";
+ cell-index = <0>;
+ interrupts = <12 0x8>;
+ interrupt-parent = < &ipic >;
+ reg = <0x1300 0x80>;
+ };
+
+ mscan@1380 {
+ compatible = "fsl,mpc5121-mscan";
+ cell-index = <1>;
+ interrupts = <13 0x8>;
+ interrupt-parent = < &ipic >;
+ reg = <0x1380 0x80>;
+ };
+
+ i2c@1700 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ cell-index = <0>;
+ reg = <0x1700 0x20>;
+ interrupts = <9 0x8>;
+ interrupt-parent = < &ipic >;
+ fsl5200-clocking;
+ };
+
+ i2c@1720 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ cell-index = <1>;
+ reg = <0x1720 0x20>;
+ interrupts = <10 0x8>;
+ interrupt-parent = < &ipic >;
+ fsl5200-clocking;
+ };
+
+ i2c@1740 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ cell-index = <2>;
+ reg = <0x1740 0x20>;
+ interrupts = <11 0x8>;
+ interrupt-parent = < &ipic >;
+ fsl5200-clocking;
+ };
+
+ i2ccontrol@1760 {
+ compatible = "fsl,mpc5121-i2c-ctrl";
+ reg = <0x1760 0x8>;
+ };
+
+ axe@2000 {
+ compatible = "fsl,mpc5121-axe";
+ reg = <0x2000 0x100>;
+ interrupts = <42 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ display@2100 {
+ compatible = "fsl,mpc5121-diu", "fsl-diu";
+ reg = <0x2100 0x100>;
+ interrupts = <64 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ mdio@2800 {
+ compatible = "fsl,mpc5121-fec-mdio";
+ reg = <0x2800 0x800>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy: ethernet-phy@0 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@2800 {
+ device_type = "network";
+ compatible = "fsl,mpc5121-fec";
+ reg = <0x2800 0x800>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <4 0x8>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy >;
+ fsl,align-tx-packets = <4>;
+ };
+
+ // 5121e has two dr usb modules
+ // mpc5121_ads only uses USB0
+
+ // USB1 using external ULPI PHY
+ //usb@3000 {
+ // compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+ // reg = <0x3000 0x1000>;
+ // #address-cells = <1>;
+ // #size-cells = <0>;
+ // interrupt-parent = < &ipic >;
+ // interrupts = <43 0x8>;
+ // dr_mode = "otg";
+ // phy_type = "ulpi";
+ // port1;
+ //};
+
+ // USB0 using internal UTMI PHY
+ usb@4000 {
+ compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+ reg = <0x4000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = < &ipic >;
+ interrupts = <44 0x8>;
+ dr_mode = "otg";
+ phy_type = "utmi_wide";
+ port0;
+ };
+
+ // IO control
+ ioctl@a000 {
+ compatible = "fsl,mpc5121-ioctl";
+ reg = <0xA000 0x1000>;
+ };
+
+ pata@10200 {
+ compatible = "fsl,mpc5121-pata";
+ reg = <0x10200 0x100>;
+ interrupts = <5 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ // 512x PSCs are not 52xx PSC compatible
// PSC3 serial port A aka ttyPSC0
serial@11300 {
device_type = "serial";
- compatible = "fsl,mpc5121-psc-uart";
+ compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
// Logical port assignment needed until driver
// learns to use aliases
port-number = <0>;
cell-index = <3>;
reg = <0x11300 0x100>;
- interrupts = <0x28 0x8>; // actually the fifo irq
+ interrupts = <40 0x8>;
interrupt-parent = < &ipic >;
+ rx-fifo-size = <16>;
+ tx-fifo-size = <16>;
};
// PSC4 serial port B aka ttyPSC1
serial@11400 {
device_type = "serial";
- compatible = "fsl,mpc5121-psc-uart";
+ compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
// Logical port assignment needed until driver
// learns to use aliases
port-number = <1>;
cell-index = <4>;
reg = <0x11400 0x100>;
- interrupts = <0x28 0x8>; // actually the fifo irq
+ interrupts = <40 0x8>;
interrupt-parent = < &ipic >;
+ rx-fifo-size = <16>;
+ tx-fifo-size = <16>;
};
- pscsfifo@11f00 {
+ // PSC5 in ac97 mode
+ ac97@11500 {
+ compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc";
+ cell-index = <5>;
+ reg = <0x11500 0x100>;
+ interrupts = <40 0x8>;
+ interrupt-parent = < &ipic >;
+ fsl,mode = "ac97-slave";
+ rx-fifo-size = <384>;
+ tx-fifo-size = <384>;
+ };
+
+ pscfifo@11f00 {
compatible = "fsl,mpc5121-psc-fifo";
reg = <0x11f00 0x100>;
- interrupts = <0x28 0x8>;
+ interrupts = <40 0x8>;
interrupt-parent = < &ipic >;
};
+
+ dma@14000 {
+ compatible = "fsl,mpc5121-dma2";
+ reg = <0x14000 0x1800>;
+ interrupts = <65 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ };
+
+ pci: pci@80008500 {
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ // IDSEL 0x15 - Slot 1 PCI
+ 0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8
+ 0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8
+ 0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8
+ 0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8
+
+ // IDSEL 0x16 - Slot 2 MiniPCI
+ 0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8
+ 0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8
+
+ // IDSEL 0x17 - Slot 3 MiniPCI
+ 0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8
+ 0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8
+ >;
+ interrupt-parent = < &ipic >;
+ interrupts = <1 0x8>;
+ bus-range = <0 0>;
+ ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
+ clock-frequency = <0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0x80008500 0x100>;
+ compatible = "fsl,mpc5121-pci";
+ device_type = "pci";
};
};
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff