cxgb4: Clear On FLASH config file after a FW upgrade
authorArjun Vynipadath <arjun@chelsio.com>
Tue, 8 Aug 2017 05:50:52 +0000 (11:20 +0530)
committerDavid S. Miller <davem@davemloft.net>
Wed, 9 Aug 2017 03:34:31 +0000 (20:34 -0700)
Because Firmware and the Firmware Configuration File need to be
in sync; clear out any On-FLASH Firmware Configuration File when new
Firmware is loaded.  This will avoid difficult to diagnose and fix
problems with a mis-matched Firmware Configuration File which prevents the
adapter from being initialized.

Original work by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c

index 1978abbc6ceb157dfb5b6887058772266f56c302..daa37750d152bac67671222166a79216111687c8 100644 (file)
@@ -1405,6 +1405,7 @@ int t4_fw_upgrade(struct adapter *adap, unsigned int mbox,
 int t4_fl_pkt_align(struct adapter *adap);
 unsigned int t4_flash_cfg_addr(struct adapter *adapter);
 int t4_check_fw_version(struct adapter *adap);
+int t4_load_cfg(struct adapter *adapter, const u8 *cfg_data, unsigned int size);
 int t4_get_fw_version(struct adapter *adapter, u32 *vers);
 int t4_get_bs_version(struct adapter *adapter, u32 *vers);
 int t4_get_tp_version(struct adapter *adapter, u32 *vers);
index 24087c88697447bc829115c0f5bd311e6f0c8266..fff8fba86f974afe2ce08cd71525b23404fd2b86 100644 (file)
@@ -6663,6 +6663,17 @@ int t4_fw_upgrade(struct adapter *adap, unsigned int mbox,
        if (ret < 0)
                goto out;
 
+       /*
+        * If there was a Firmware Configuration File stored in FLASH,
+        * there's a good chance that it won't be compatible with the new
+        * Firmware.  In order to prevent difficult to diagnose adapter
+        * initialization issues, we clear out the Firmware Configuration File
+        * portion of the FLASH .  The user will need to re-FLASH a new
+        * Firmware Configuration File which is compatible with the new
+        * Firmware if that's desired.
+        */
+       (void)t4_load_cfg(adap, NULL, 0);
+
        /*
         * Older versions of the firmware don't understand the new
         * PCIE_FW.HALT flag and so won't know to perform a RESET when they
@@ -8895,6 +8906,65 @@ void t4_idma_monitor(struct adapter *adapter,
        }
 }
 
+/**
+ *     t4_load_cfg - download config file
+ *     @adap: the adapter
+ *     @cfg_data: the cfg text file to write
+ *     @size: text file size
+ *
+ *     Write the supplied config text file to the card's serial flash.
+ */
+int t4_load_cfg(struct adapter *adap, const u8 *cfg_data, unsigned int size)
+{
+       int ret, i, n, cfg_addr;
+       unsigned int addr;
+       unsigned int flash_cfg_start_sec;
+       unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec;
+
+       cfg_addr = t4_flash_cfg_addr(adap);
+       if (cfg_addr < 0)
+               return cfg_addr;
+
+       addr = cfg_addr;
+       flash_cfg_start_sec = addr / SF_SEC_SIZE;
+
+       if (size > FLASH_CFG_MAX_SIZE) {
+               dev_err(adap->pdev_dev, "cfg file too large, max is %u bytes\n",
+                       FLASH_CFG_MAX_SIZE);
+               return -EFBIG;
+       }
+
+       i = DIV_ROUND_UP(FLASH_CFG_MAX_SIZE,    /* # of sectors spanned */
+                        sf_sec_size);
+       ret = t4_flash_erase_sectors(adap, flash_cfg_start_sec,
+                                    flash_cfg_start_sec + i - 1);
+       /* If size == 0 then we're simply erasing the FLASH sectors associated
+        * with the on-adapter Firmware Configuration File.
+        */
+       if (ret || size == 0)
+               goto out;
+
+       /* this will write to the flash up to SF_PAGE_SIZE at a time */
+       for (i = 0; i < size; i += SF_PAGE_SIZE) {
+               if ((size - i) <  SF_PAGE_SIZE)
+                       n = size - i;
+               else
+                       n = SF_PAGE_SIZE;
+               ret = t4_write_flash(adap, addr, n, cfg_data);
+               if (ret)
+                       goto out;
+
+               addr += SF_PAGE_SIZE;
+               cfg_data += SF_PAGE_SIZE;
+       }
+
+out:
+       if (ret)
+               dev_err(adap->pdev_dev, "config file %s failed %d\n",
+                       (size == 0 ? "clear" : "download"), ret);
+       return ret;
+}
+
 /**
  *     t4_set_vf_mac - Set MAC address for the specified VF
  *     @adapter: The adapter