dts/imx: rename gpio labels to consistent with hw spec
authorRichard Zhao <richard.zhao@linaro.org>
Wed, 14 Dec 2011 01:26:44 +0000 (09:26 +0800)
committerShawn Guo <shawn.guo@linaro.org>
Wed, 14 Dec 2011 13:25:43 +0000 (21:25 +0800)
GPIO1/GPIO2/... is more readable than GPIO0/GPIO1/... .
Remove redundant gpio comments.

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
arch/arm/boot/dts/imx51-babbage.dts
arch/arm/boot/dts/imx51.dtsi
arch/arm/boot/dts/imx53-ard.dts
arch/arm/boot/dts/imx53-evk.dts
arch/arm/boot/dts/imx53-qsb.dts
arch/arm/boot/dts/imx53-smd.dts
arch/arm/boot/dts/imx53.dtsi
arch/arm/boot/dts/imx6q-sabreauto.dts
arch/arm/boot/dts/imx6q.dtsi

index f8766af11215136594cdb31fff7c1cfec968c67b..ed09dc1a2bb46ddb024aab2926343b816aafe85e 100644 (file)
@@ -35,8 +35,8 @@
                                };
 
                                esdhc@70008000 { /* ESDHC2 */
-                                       cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
-                                       wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+                                       cd-gpios = <&gpio1 6 0>;
+                                       wp-gpios = <&gpio1 5 0>;
                                        status = "okay";
                                };
 
@@ -47,8 +47,7 @@
 
                                ecspi@70010000 { /* ECSPI1 */
                                        fsl,spi-num-chipselects = <2>;
-                                       cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
-                                                  <&gpio3 25 0>; /* GPIO4_25 */
+                                       cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
                                        status = "okay";
 
                                        pmic: mc13892@0 {
@@ -57,7 +56,7 @@
                                                compatible = "fsl,mc13892";
                                                spi-max-frequency = <6000000>;
                                                reg = <0>;
-                                               mc13xxx-irq-gpios = <&gpio0 8 0>; /* GPIO1_8 */
+                                               mc13xxx-irq-gpios = <&gpio1 8 0>;
                                                fsl,mc13xxx-uses-regulator;
                                        };
 
 
                power {
                        label = "Power Button";
-                       gpios = <&gpio1 21 0>;
+                       gpios = <&gpio2 21 0>;
                        linux,code = <116>; /* KEY_POWER */
                        gpio-key,wakeup;
                };
index 327ab8e3a4c8ad63473a7121f743a9aeeeca9943..57a790df28fc04f0b0f0191bb440b3f9c3822fe3 100644 (file)
                                };
                        };
 
-                       gpio0: gpio@73f84000 { /* GPIO1 */
+                       gpio1: gpio@73f84000 {
                                compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
                                reg = <0x73f84000 0x4000>;
                                interrupts = <50 51>;
                                #interrupt-cells = <1>;
                        };
 
-                       gpio1: gpio@73f88000 { /* GPIO2 */
+                       gpio2: gpio@73f88000 {
                                compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
                                reg = <0x73f88000 0x4000>;
                                interrupts = <52 53>;
                                #interrupt-cells = <1>;
                        };
 
-                       gpio2: gpio@73f8c000 { /* GPIO3 */
+                       gpio3: gpio@73f8c000 {
                                compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
                                reg = <0x73f8c000 0x4000>;
                                interrupts = <54 55>;
                                #interrupt-cells = <1>;
                        };
 
-                       gpio3: gpio@73f90000 { /* GPIO4 */
+                       gpio4: gpio@73f90000 {
                                compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
                                reg = <0x73f90000 0x4000>;
                                interrupts = <56 57>;
index 2ab7f80a0a35c3c03fccf3d5a60ed69fad2f9f26..78c949e18ce0014c1be426055700f201e333313f 100644 (file)
@@ -29,8 +29,8 @@
                aips@50000000 { /* AIPS1 */
                        spba@50000000 {
                                esdhc@50004000 { /* ESDHC1 */
-                                       cd-gpios = <&gpio0 1 0>; /* GPIO1_1 */
-                                       wp-gpios = <&gpio0 9 0>; /* GPIO1_9 */
+                                       cd-gpios = <&gpio1 1 0>;
+                                       wp-gpios = <&gpio1 9 0>;
                                        status = "okay";
                                };
                        };
@@ -67,7 +67,7 @@
                        compatible = "smsc,lan9220", "smsc,lan9115";
                        reg = <0xf4000000 0x2000000>;
                        phy-mode = "mii";
-                       interrupt-parent = <&gpio1>;
+                       interrupt-parent = <&gpio2>;
                        interrupts = <31>;
                        reg-io-width = <4>;
                        smsc,irq-push-pull;
 
                home {
                        label = "Home";
-                       gpios = <&gpio4 10 0>; /* GPIO5_10 */
+                       gpios = <&gpio5 10 0>;
                        linux,code = <102>; /* KEY_HOME */
                        gpio-key,wakeup;
                };
 
                back {
                        label = "Back";
-                       gpios = <&gpio4 11 0>; /* GPIO5_11 */
+                       gpios = <&gpio5 11 0>;
                        linux,code = <158>; /* KEY_BACK */
                        gpio-key,wakeup;
                };
 
                program {
                        label = "Program";
-                       gpios = <&gpio4 12 0>; /* GPIO5_12 */
+                       gpios = <&gpio5 12 0>;
                        linux,code = <362>; /* KEY_PROGRAM */
                        gpio-key,wakeup;
                };
 
                volume-up {
                        label = "Volume Up";
-                       gpios = <&gpio4 13 0>; /* GPIO5_13 */
+                       gpios = <&gpio5 13 0>;
                        linux,code = <115>; /* KEY_VOLUMEUP */
                };
 
                volume-down {
                        label = "Volume Down";
-                       gpios = <&gpio3 0 0>; /* GPIO4_0 */
+                       gpios = <&gpio4 0 0>;
                        linux,code = <114>; /* KEY_VOLUMEDOWN */
                };
        };
index 3f3a88185ff8e6fb860f1033ff89f5f13d107989..964743e39eb7a3f6c99e3f8d3f7cf18f84452edc 100644 (file)
                aips@50000000 { /* AIPS1 */
                        spba@50000000 {
                                esdhc@50004000 { /* ESDHC1 */
-                                       cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
-                                       wp-gpios = <&gpio2 14 0>; /* GPIO3_14 */
+                                       cd-gpios = <&gpio3 13 0>;
+                                       wp-gpios = <&gpio3 14 0>;
                                        status = "okay";
                                };
 
                                ecspi@50010000 { /* ECSPI1 */
                                        fsl,spi-num-chipselects = <2>;
-                                       cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */
-                                                  <&gpio2 19 0>; /* GPIO3_19 */
+                                       cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
                                        status = "okay";
 
                                        flash: at45db321d@1 {
@@ -61,8 +60,8 @@
                                };
 
                                esdhc@50020000 { /* ESDHC3 */
-                                       cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */
-                                       wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */
+                                       cd-gpios = <&gpio3 11 0>;
+                                       wp-gpios = <&gpio3 12 0>;
                                        status = "okay";
                                };
                        };
 
                        fec@63fec000 {
                                phy-mode = "rmii";
-                               phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+                               phy-reset-gpios = <&gpio7 6 0>;
                                status = "okay";
                        };
                };
 
                green {
                        label = "Heartbeat";
-                       gpios = <&gpio6 7 0>; /* GPIO7_7 */
+                       gpios = <&gpio7 7 0>;
                        linux,default-trigger = "heartbeat";
                };
        };
index ae6de6d0c3f1b57ee23f52b596f3eda1c8468014..cc43bde92ac9ad9fab1087a25651d2913740052a 100644 (file)
                aips@50000000 { /* AIPS1 */
                        spba@50000000 {
                                esdhc@50004000 { /* ESDHC1 */
-                                       cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
+                                       cd-gpios = <&gpio3 13 0>;
                                        status = "okay";
                                };
 
                                esdhc@50020000 { /* ESDHC3 */
-                                       cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */
-                                       wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */
+                                       cd-gpios = <&gpio3 11 0>;
+                                       wp-gpios = <&gpio3 12 0>;
                                        status = "okay";
                                };
                        };
@@ -84,7 +84,7 @@
 
                        fec@63fec000 {
                                phy-mode = "rmii";
-                               phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+                               phy-reset-gpios = <&gpio7 6 0>;
                                status = "okay";
                        };
                };
 
                power {
                        label = "Power Button";
-                       gpios = <&gpio0 8 0>; /* GPIO1_8 */
+                       gpios = <&gpio1 8 0>;
                        linux,code = <116>; /* KEY_POWER */
                        gpio-key,wakeup;
                };
 
                volume-up {
                        label = "Volume Up";
-                       gpios = <&gpio1 14 0>; /* GPIO2_14 */
+                       gpios = <&gpio2 14 0>;
                        linux,code = <115>; /* KEY_VOLUMEUP */
                };
 
                volume-down {
                        label = "Volume Down";
-                       gpios = <&gpio1 15 0>; /* GPIO2_15 */
+                       gpios = <&gpio2 15 0>;
                        linux,code = <114>; /* KEY_VOLUMEDOWN */
                };
        };
 
                user {
                        label = "Heartbeat";
-                       gpios = <&gpio6 7 0>; /* GPIO7_7 */
+                       gpios = <&gpio7 7 0>;
                        linux,default-trigger = "heartbeat";
                };
        };
index b1c062eea715bc2995e329998ee40200930483fd..9e51bc371efb22dcf212848dac7a0017cc537fdb 100644 (file)
@@ -29,8 +29,8 @@
                aips@50000000 { /* AIPS1 */
                        spba@50000000 {
                                esdhc@50004000 { /* ESDHC1 */
-                                       cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
-                                       wp-gpios = <&gpio3 11 0>; /* GPIO4_11 */
+                                       cd-gpios = <&gpio3 13 0>;
+                                       wp-gpios = <&gpio4 11 0>;
                                        status = "okay";
                                };
 
@@ -46,8 +46,7 @@
 
                                ecspi@50010000 { /* ECSPI1 */
                                        fsl,spi-num-chipselects = <2>;
-                                       cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */
-                                                  <&gpio2 19 0>; /* GPIO3_19 */
+                                       cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
                                        status = "okay";
 
                                        zigbee: mc1323@0 {
 
                        fec@63fec000 {
                                phy-mode = "rmii";
-                               phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+                               phy-reset-gpios = <&gpio7 6 0>;
                                status = "okay";
                        };
                };
 
                volume-up {
                        label = "Volume Up";
-                       gpios = <&gpio1 14 0>; /* GPIO2_14 */
+                       gpios = <&gpio2 14 0>;
                        linux,code = <115>; /* KEY_VOLUMEUP */
                };
 
                volume-down {
                        label = "Volume Down";
-                       gpios = <&gpio1 15 0>; /* GPIO2_15 */
+                       gpios = <&gpio2 15 0>;
                        linux,code = <114>; /* KEY_VOLUMEDOWN */
                };
        };
index 099cd84ee372cb281c5b4f1c4753c4ca730fc264..3b15cdc608ea69b338420a05d01b25a976e16a23 100644 (file)
                                };
                        };
 
-                       gpio0: gpio@53f84000 { /* GPIO1 */
+                       gpio1: gpio@53f84000 {
                                compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
                                reg = <0x53f84000 0x4000>;
                                interrupts = <50 51>;
                                #interrupt-cells = <1>;
                        };
 
-                       gpio1: gpio@53f88000 { /* GPIO2 */
+                       gpio2: gpio@53f88000 {
                                compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
                                reg = <0x53f88000 0x4000>;
                                interrupts = <52 53>;
                                #interrupt-cells = <1>;
                        };
 
-                       gpio2: gpio@53f8c000 { /* GPIO3 */
+                       gpio3: gpio@53f8c000 {
                                compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
                                reg = <0x53f8c000 0x4000>;
                                interrupts = <54 55>;
                                #interrupt-cells = <1>;
                        };
 
-                       gpio3: gpio@53f90000 { /* GPIO4 */
+                       gpio4: gpio@53f90000 {
                                compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
                                reg = <0x53f90000 0x4000>;
                                interrupts = <56 57>;
                                status = "disabled";
                        };
 
-                       gpio4: gpio@53fdc000 { /* GPIO5 */
+                       gpio5: gpio@53fdc000 {
                                compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
                                reg = <0x53fdc000 0x4000>;
                                interrupts = <103 104>;
                                #interrupt-cells = <1>;
                        };
 
-                       gpio5: gpio@53fe0000 { /* GPIO6 */
+                       gpio6: gpio@53fe0000 {
                                compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
                                reg = <0x53fe0000 0x4000>;
                                interrupts = <105 106>;
                                #interrupt-cells = <1>;
                        };
 
-                       gpio6: gpio@53fe4000 { /* GPIO7 */
+                       gpio7: gpio@53fe4000 {
                                compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
                                reg = <0x53fe4000 0x4000>;
                                interrupts = <107 108>;
index 072974e443f22b20eb7127511f2c176b1abc7720..cd11ab0b85b9713acbc6c33c0de4fbc650b5a541 100644 (file)
@@ -34,8 +34,8 @@
                        };
 
                        usdhc@02198000 { /* uSDHC3 */
-                               cd-gpios = <&gpio5 11 0>; /* GPIO6_11 */
-                               wp-gpios = <&gpio5 14 0>; /* GPIO6_14 */
+                               cd-gpios = <&gpio6 11 0>;
+                               wp-gpios = <&gpio6 14 0>;
                                status = "okay";
                        };
 
@@ -55,7 +55,7 @@
 
                debug-led {
                        label = "Heartbeat";
-                       gpios = <&gpio2 25 0>; /* GPIO3_25 */
+                       gpios = <&gpio3 25 0>;
                        linux,default-trigger = "heartbeat";
                };
        };
index 7dda599558cc0b54b4ff2aa6a20756cd0d623bbc..9d0bf4b4fb37e4e9651dcc38625158a57869ce27 100644 (file)
                                interrupts = <0 55 0x04>;
                        };
 
-                       gpio0: gpio@0209c000 { /* GPIO1 */
+                       gpio1: gpio@0209c000 {
                                compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
                                reg = <0x0209c000 0x4000>;
                                interrupts = <0 66 0x04 0 67 0x04>;
                                #interrupt-cells = <1>;
                        };
 
-                       gpio1: gpio@020a0000 { /* GPIO2 */
+                       gpio2: gpio@020a0000 {
                                compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
                                reg = <0x020a0000 0x4000>;
                                interrupts = <0 68 0x04 0 69 0x04>;
                                #interrupt-cells = <1>;
                        };
 
-                       gpio2: gpio@020a4000 { /* GPIO3 */
+                       gpio3: gpio@020a4000 {
                                compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
                                reg = <0x020a4000 0x4000>;
                                interrupts = <0 70 0x04 0 71 0x04>;
                                #interrupt-cells = <1>;
                        };
 
-                       gpio3: gpio@020a8000 { /* GPIO4 */
+                       gpio4: gpio@020a8000 {
                                compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
                                reg = <0x020a8000 0x4000>;
                                interrupts = <0 72 0x04 0 73 0x04>;
                                #interrupt-cells = <1>;
                        };
 
-                       gpio4: gpio@020ac000 { /* GPIO5 */
+                       gpio5: gpio@020ac000 {
                                compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
                                reg = <0x020ac000 0x4000>;
                                interrupts = <0 74 0x04 0 75 0x04>;
                                #interrupt-cells = <1>;
                        };
 
-                       gpio5: gpio@020b0000 { /* GPIO6 */
+                       gpio6: gpio@020b0000 {
                                compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
                                reg = <0x020b0000 0x4000>;
                                interrupts = <0 76 0x04 0 77 0x04>;
                                #interrupt-cells = <1>;
                        };
 
-                       gpio6: gpio@020b4000 { /* GPIO7 */
+                       gpio7: gpio@020b4000 {
                                compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
                                reg = <0x020b4000 0x4000>;
                                interrupts = <0 78 0x04 0 79 0x04>;